green line Material Handling Machine66,500 lbs.

204 HPC Series

825M_Cover FINAL 4/7/05 10:07 AM Page 3

2

Working Attachments

Scrap Grapple

HookMagnet

Scrap Shear

Timber Grab

Rehandling Grab

Concrete Cutter

Concrete Crusher

Recycling andDemolition Grab

825M_Insides FINAL 4/7/05 10:11 AM Page 2

3

• 6 cylinder, water cooled, turbo Deutz diesel engine BF6M1013EC, with direct injection

• Output as per DIN/ISO: 204 HP at 2000 rpm

• Radiator fan is hydraulically driven and is reversible to clean out debris from radiator

• Equipped with engine intercooler• Dry air filter with cyclone prefilter, safety

element and pollution indicator

• Fuel tank capacity: 122 gallons• Electrical system:

24 volt, 2 x 12 volt high performance batteries

• Computer free load-sensing hydraulic systemwith energy saving flow on demand control andpressure cut off function

• All working functions can be operated simultaneously and be individually controlledvery precisely due to the independent and proportional split of the oil feed from the variable displacement pump

• Hydraulic system designed for low pressurelosses and heat generation by large diameterpiping and hoses as well as large control valves

• Pilot operated joy sticks control all working and auxiliary functions

• Flow rate 1 x 140 gpm• Working pressure 5075 psi• Hydraulic tank capacity 79.25 gallons

• Special ultra fine filtration system (99.95% efficiency at 2 micron) designed to protect thehydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs

• Full flow return oil filters with extended change intervals

• Oversized hydraulic oil cooler, mounted completely separated from the water radiator,maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled

• Centralized pressure test ports, easily accessible from ground level, mounted and wellprotected on the left side of the machine, enablefast trouble shooting of all machine functionswithout any electronic support

• 15 kW Baldor generator, belt driven for easyoperation and maintenance, combined with aHubbell controller

• 0.75, 1.0 and 1.25 cu. yds. scrap grapple withrotation, 4 or 5 tine, open, semi-closed orclosed, depending on the weight of the grappleand operating reach

• 0.75 to 2.0 cu. yds. clamshell grapple with rotation, depending on the material density,weight of the grapple and operating reach

• Log grapple available in different sizes and configurations depending on material beinghandled

• Contact Sennebogen for approval of the attachment before operating the machine

• Always refer to the lifting capacities on thechart before installing any attachment

• Basic 825 with 4 point outriggers, material handling boom 24'3", stick 18'8" and scrapgrapple 0.78 cu. yds.

Approximate weight 66,500 lbs.Given weights may vary with different equipment

• Comfortable F2000 operator’s cab resiliently mounted

• Sound absorbing insulation• Roomy compartment with excellent

all-round visibility• All weather design with tinted safety glass• Door window as sliding window• Windshield can be pushed up under cab roof• Large skylight• Windshield wiper/washer on both windshield

and skylight• Sun visor• Large capacity storage bin• Ergonomically designed, air suspension and

heated seat with adjustable armrests and lumbar support

• Well laid out instrument panel with ergonomically shaped joy sticks

• Adjustable steering column• Infinitely variable cab heating system, outside

air and circulating air stages with particle filter• Five adjustable air vents for optimum

work environment• New Sennebogen Diagnostic System (SDS) for

monitoring all essential machine and enginefunctions with visual and audible warning system

• 12 and 24 volt power supply• Air conditioning• AM/FM radio with cassette

• Axial piston motor, spring-loaded hydraulicallyreleasable multiple disk brake, planetary gearand pinion shaft

• Large dimensioned swing bearing• Swing speed: 0 - 8 rpm, infinitely controllable• Hydraulic motor with integrated hydraulic brake

valves keep wear and tear of braking system toa minimum

• Undercarriage welded as rigid, torsion-free box-type design

• 4-point outriggers• Lockable storage compartment• Tires: 8 x 10.00-20 solid rubber tires with

intermediate protector ringOption:• 8 pneumatic tires 10.00-20

• All wheel drive via variable hydraulic motor with directly mounted automatic brake valveand 2-stage powershift gear

• 2-circuit servo brake system with additionalsafety brake as parking brake

• Special design, heavy duty, extra wide, 44 t axles

• Steering axle as hydraulically controllable oscillating axle

• Oscillating axle cylinders with safety check valves

• 0 - 3.4 mph off road• 0 - 12.5 mph on road

• Torsion-free upper frame with continuous bearing-plates for optimal power introduction,precision machined

• Steel bushings for the boom pivot• Low noise emission

• Box-type design with large dimensioned sealedbearings for long working-life

• Grapple open-close and rotate circuits installedon the machine

• Working cylinders with hydraulic end position damping

• Optimized design for high lifting capacities• Equipped standard with safety check valves

(load holding valves) for boom and stick cylinders

• The 825 M C Series material handling equipment has been specially designed for the increased demands of high-performanceoperation, increased productivity and output

Specifications

Engine

Hydraulic System

Undercarriage

Uppercarriage

Operating Weight

■ Working radius up to 47'■ No computers required to control hydraulic system■ Ultra fine hydraulic oil filtration system reduces

maintenance cost and down time of machine

■ Central lubrication system standard■ State-of-the-art load-sensing hydraulic system■ Powerful maintenance-friendly design■ Low noise emission

Working Equipment

Magnet System

Grapple

Operator’s Cab

Certification according to regulations

Subject to technical modification

Swing System

825M_Insides FINAL 4/7/05 10:11 AM Page 5

4

825 M■ Undercarriage: MP25, 4-point outriggers

tires 8 x 10.00-20■ Boom: 24'3"■ Stick: 18'8"■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'8"

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

19,840

14,110

18,740

26,230[ 20,060]

29,100[17,640]

15,650[15,430]

10,140

14,110

15,650[14,770]

16,750[14,770]

17,420[14,550]

18,300[13,890]

19,620[13,010]

20,720[11,900]

18,520[10,800]

19,400[9,920]

16,310[9,700]

11,240[10,140]

13,890[10,360]

14,330[10,360]

14,550[10,140]

14,990[9,920]

15,650[9,260]

15,870[8,600]

15,870[7,940]

14,990[7,500]

13,010[7,280]

11,020[7,720]

12,350[7,720]

12,570[7,500]

12,570[7,280]

12,790[7,050]

13,010[6,610]

12,570[6,170]

11,900[4,630]

10,360[5,730]

10,140[5,730]

10,800[5,730]

10,800[5,730]

10,800[5,510]

10,580[5,290]

10,360[5,070]

9,480[4,850]

8,160[4,630]

9,260[4,410]

9,040[4,410]

8,820[4,190]

8,160[4,190]

7,280[3,970]

0 5 10 15 20 25 30 35 40 45 50

0

5

10

15

20

25

30

35

40

45

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image14022003104225

Load chartNotes:Lifting capacities are stated in pounds. Indicated loads are based on ISO 10567 and do not exceed 75% of tipping and 87% of hydraulic capacity.Machine on firm, level supporting surface. Loads valid for 360° on outriggers supported.Loads in [ . . . ] are valid 360° free on wheels.Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbersindicated in the lifting charts.

K13

825M_Insides FINAL 4/7/05 11:04 AM Page 6

5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

17,860

10,580

12,350

16,530

23,810

[19,400]

28,000

[16,750]

13,670

8,380

12,350

13,890

14,770

[14,110]

16,090

[13,670]

17,420

[13,230]

18,520

[12,130]

19,400

[11,020]

19,620

[9,920]

18,080

[9,040]

14,990

[8,600]

9,700

[9,260]

12,350

[9,480]

13,230

[9,700]

13,450

[9,480]

18,300

[9,040]

14,330

[8,380]

14,770

[7,720]

14,550

[ 7,050]

13,670

[6,610]

11,680

[6,170]

9,480

[6,830]

11,240

[6,830]

11,460

[6,830]

11,460

[6,610]

11,680

[6,170]

11,680

[ 5,730]

11,460

[5,290]

10,140

[5,070]

9,040

[4,850]

8,600

[4,850]

9,700

[4,850]

9,700

[4,850]

9,700

[4,630]

9,480

[4,410]

9,040

[4,190]

8,160

[3,970]

6,830

[3,750]

5,950

[3,530]

7,940

[3,530]

7,940

[3,530]

7,500

[3,310]

7,050

[3,090]

6,170

[3,090]

0 5 10 15 20 25 30 35 40 45 50

0

5

10

15

20

25

30

35

40

45

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image18022003103244

825 M■ Undercarriage: MP25, 4-point outriggers,

tires 8 x 10.00-20■ Boom: 24'3"■ Stick: 18'8" with reversing mechanism■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 18'8"

K13

825M_Insides FINAL 4/7/05 11:04 AM Page 7

6

11"

10’7

"

9’

13’11"

12’10"

9’

1’1"

10’4

"

19’2

"

8’10

"

16’3"

15’1"

8’10"

4’1"

9’2"

Machine Specifications

■ 825 M with 8'10" hydraulic elevating Cab Type C 270

Available with optional 6'7", 9'10" or higher. Hydraulic tilting mechanism for easy transportation is standard on all hi-rise cabs.

1’1"

13’11"

12’10"

9’

11"

9’

4’1"

16’3"

15’1"

8’10"

13’6

"

9’5"

9’2"

24’9"

■ 825 M equipped with hi-rise cab, standard height 3'3"

Depending upon tolerances, measurements may vary.

825M_Insides FINAL 4/7/05 10:11 AM Page 4

36’3"

11’2

"

7

Shipping Specifications

36’3"

11’2

"

825 M with Boom 24'3" and Stick 18'8" with reversing mechanism

825 M with Boom 24'3" and Stick 18'8"

825M_Insides FINAL 4/7/05 10:11 AM Page 3

825

M-C

-US

A-0

305-

3

www.sennebogen-na.com

Under our policy of continuous improvement, we reserve the right to change specificationsand design without prior notice. The illustrations shown may include optional equipment.

SENNEBOGEN LLC2835 Jeff Adams Drive, Suite HCharlotte, NC 28206Telephone (Toll Free) 1-877-309-0099Fax: 704-347-8894E-Mail: sales@sennebogen-na.com

Left side compartment holds key components■ Diesel tank■ Electrical box with all fuses and relays for easy access

and centralized electrical maintenance■ Central lubrication system■ Centralized pressure test ports for trouble shooting

of all working functions

Serviceability■ The C Series machines offer a coarse particle separator

at the front of engine cooler and air filter■ Ease of access for air filter and battery maintenance■ Hydraulic oil cooler separated from radiator, mounted on

the left side towards the back of the machine, hydraulicallydriven and easy to clean

■ The radiator fan is reversible and controlled from the cab,allowing the driver to clean out any debris from the radiator compartment

Comfortable F2000 operator’s cab■ Advanced design, clear layout■ Low noise and vibration■ Excellent all-round visibility■ Fully adjustable air suspension seat, heated■ Heating and air conditioning with fresh / recirculation

airflow and air filter■ Adjustable steering column

Large engine compartment■ Powerful water-cooled Deutz diesel engine

longitudinally mounted for ease of access■ Daily service conveniently and easily performed

from ground level■ Large access door with gas shocks provide easy

access to engine compartment

825M_Cover FINAL 4/7/05 10:06 AM Page 2