818.508.7034

HEARDOF ANYPLANTCLOSURES?FINDER’SFEESPAID.

FINDER’SFEESPAID.

THE INDUSTRY

SOURCEFOR

ONLINEAUCTIONS &LIQUIDATIONS

818.508.7034

REDFORD Shell Core Machine, Mdl. HS16RA

CORE ROOM MELTING SAND LABREDFORD Mdl. HS16RA Shell Core Machine, s/n 679-397.REDFORD Mdl. HP43A Shell Core Machine, s/n 373-962.REDFORD Mdl. HP42 Shell Core Machine.GRIEVE Mdl. HS-500 500˚ Gas Fired Oven, 3’ x 3’ x 2’ Deep, s/n 18420.

1984 HUNTER Mdl. HMP10C Automatic Molding Machine, 14 x 19 Flask Size, 5 1/2Deep w/Safe Scan, 30’ Accumulating Conveyor, Feed Belt Conveyor, s/n 84D962.1971 HUNTER Mdl. HMP10 Automatic Molding Machine, 14 x 19 Flask SizeConverted To PLC Controls w/Safe Scan, 30’ Accumulating Conveyor, Feed Belt Conveyorw/Aerator, s/n 71H447.1975 COMMON HUNTER Mdl. HMH210 Pouring Turntable 14 x 19 CW & 2 Wide CoolingConveyor Walking Beam Type, Common Bottom Board Return Conveyor, s/n 75M179.

CLEANINGWHEELABRATOR Mdl. 14 C.F. Super Tumblast w/Floor Loader & ManganeseFlights 24” x 15’ Belt Discharge Conveyor w/Drive, WHEELABRATOR Mdl. 70AC, #8Shaker Dust Collector w/Blower, s/n A129730.

1993 INDUCTOTHERM Mdl. 250-10R 250 KW 1000 Hz CorelessInduction Melting Furnace w/INDUCTOTHERM 1000 Lb. Hydraulic TiltingFurnace w/Lid, s/n 93-14709-246-11.(2) AJAX 300 KW 6000 Lb. Brass Vertical Channel Melting Furnacesw/Hydraulic System, Water System, Spare Inductors & Spare Furnace Body, s/nCU2246-M.

MULLER & SAND SYSTEMSTATES Mdl. M2500 Ringmuller w/PLC Controls Installed 1992, 7613 HoursUsage, s/n M-25827-S1-100-30. 1996 CARRIER Mdl. HR-24110F-54-1-10HP 30/24” x 54’ Double DeckOscillating Conveyor w/10HP Drive, s/n 23949. Low Profile Sand System 22’ Top To Floor To Include FLEXOWALL Z TypeFeeder 30 TPH, 3’ x 6’ Lump Breaker Screen, 24”x 24’ Belt Conveyor w/Drive, 5’ x6’ Sand Bin, Return Sand Bucket Elevator, Sand Screen, 24” x 17’ Belt Conveyorw/Plow Stations, Approx. 100-T Sand Bin w/Belt Conveyor Discharge, MullerDischarge Belt Conveyor, Sand Bucket Elevator To Distribution Belt Conveyor & SandSystem PLC Controls.

DIETERT Mdl. 276 Moisture Tester, DIETERT Mdl. 401 Sand StrengthTester, OHAUS Precision Standard Gram Balance, DIETERT Mdl. 315Sand Rammer w/Base, DIETERT Rotap w/Screens, DIETERT Mdl. 338 ElectricPermmeter, DIETERT MB Clay Tester, Sand Dryer, Ultrasonic Cleaner, Etc.

DUST COLLECTORS1990 DCE Mdl. DLM 4/8/15 35,000 CFM Pulse Dust Collector, 5167 S.F.Cloth Area 100HP Motor & Blower, s/n 90-1602.(2) KIRK & BLUM Mdl. DC9800-1 10,000 CFM Shaker Dust Collectors,2.5 To 1 Ratio 50HP Motors & Blowers, s/n J104.

MISCELLANEOUSTRANSWEIGH Mdl. 6260 5000 Lb. Crane Scale w/Remote DigitalReadout & 2-T YALE Electric Hoist w/3 Way Pendent Controls • (2) HandLadles w/Pouring Devices • ELECTRONITE Mdl. DT400 TemperatureIndicator • Sand Silo w/Bin Vent Dust Collector • HANKISON Mdl. DH-115Compressed Air Dryer s/n 348-1-9 115 SCFM • GILSON 4-Bag ElectricCement Mixer w/Drive • 10-T Chain Hoist w/Monorail System • (2) 1 1/2”MILWAUKEE Sprue Cutters • (2) 4” Double End Grinders.

www.biditup.com

KNOW THEVALUEOF YOUR

ASSETS?

DOES!

REDFORD Shell Core Machine, Mdl. HP43A REDFORD Shell Core Machine, Mdl. HP42 GRIEVE 500˚ Gas Fired Oven, Mdl. HS-500 INDUCTOTHERM Coreless Induction Melting Furnace, Mdl. 250-10R

WHEELABRATOR Super Tumblast, Mdl. 14 C.F. Low Profile Sand SystemCARRIER Double Deck Oscillating Conveyor, Mdl. HR-24110F-54-1-10HPSTATES Ringmuller, Mdl. M2500 HUNTER Automatic Molding Machine, Mdl. HMP10C

HUNTER Automatic Molding Machine, Mdl. HMP10 COMMON HUNTER Pouring Turntable, Mdl. HMH210 View of Lab DCE 35,000 CFM Pulse Dust Collector, Mdl. DLM 4/8/15

2 AVAILABLE

GILSON 4-Bag Electric Cement Mixer

biditup!

ASSETS NO LONGER REQUIRED

IN THE ONGOING OPERATIONS OF: 2100 SOUTH CLEARWATER DRIVE, DES PLAINES, IL10:30 AM • TUES., OCT. 22NDTHE CHICAGO FAUCET COMPANY BRASS FOUNDRYBRASS FOUNDRY

MOLDING

Visit Us On the Web:www.biditup.com

ASSETS NO LONGER REQUIRED IN THE ONGOING OPERATIONS OF:

2100 SOUTH CLEARWATER DRIVE, DES PLAINES, IL10:30 AM • TUESDAY, OCTOBER 22ND

INSPECTION: MONDAY, OCTOBER 21ST, 9 AM-4 PM & MORNING OF SALE

THE CHICAGO FAUCET COMPANYBRASS FOUNDRYBRASS FOUNDRY

Tel: 818-508-7034 • Fax: 818-508-3025email: info@biditup.com

MELTING1997 INDUCTOTHERM Mdl. 2500-5CR 2500 KW Coreless Induction FurnaceSystem w/2500 KW 700Hz Power Supply s/n 97l-63661-246-11, Internal Water Systemw/15HP Motor & Pump, Heat Exchanger & Piping, 5-T Steel Shell Furnace w/Hyd. TiltingSystem & Lid, Tap Change Transformer, Ground Leak Detection, Melt Manager, RemoteOperators Console.(2) 1964 & 1969 LECTROMELT Mdl. QT 4-T Capacity Electric Arc MeltingFurnaces One Left Hand & One Right Hand, Each Equipped w/MCGRAW EDISON3360/3000 KVA Power Transformer 4800 Volt Primary, 235 Volt Secondary, 6 High Side Taps, Automatic Tap Changer, JOSLYN Switch, 25HP Hyd. System, MotorizedTilting, Water Cooled Electrode Holders, Cables, Roof Ring & Slag Door,SAFETRONIC Electrode Drives, DURANT Time Management System, Fire System,s/n’s 1084-F & 1144-F

1983 Venetta Scrap Preheat System s/n 83533 to Include Venetta 68/48” x 7’6” x32” Deep Charge Makeup Feeder w/TOLEDO Mdl. 8132 10,000 Lb. Load Cell WeightScale s/n 130929 w/Digital Readout, & Digital Crane Readout, VENETTA PreheatConveyor 60/48” x 18’ x 20” Deep w/12 Burner Hood & Gas System s/n 83533-21-201,VENETTA Controls Console, Dust Collector & Blower.63” x 66” Powered Charge Car w/Controls & 2- 48” Dia. x 50” Deep Clam TypeCharge Buckets.(4) ELECTRONITE Positherm Temperature Indicators w/Digital Readouts.(2) ELECTRONITE Datacast 2000 Carbon, Carbon Equivalent & SiliconIndicators w/Digital Readouts s/n CN-140042,43.ELECTRONITE Quicklab II Carbon, Carbon Equivalent, & Silicon Indicator.ELECTRONITE Mdl. DT-400 Temperature Indicator w/Digital Readout.

Chip Feed System w/5-T Chip Bin 6’ Dia. w/6’ Dia. Rotary Plate Feeder w/Drive,CARRIER Posiflow Oscillating Feeder 20/18” x 6’ x 9” Deep w/Drive, 40’ Long 6” Dia. ScrewConveyor w/Drive Rated @ 8000 Lb./Hour, 21’ Long 6” Dia. Screw Conveyor w/Drive Rated@ 8000 Lb./Hour, 4’ Dia. Receiving Bin w/3’ Dia. Rotary Plate Feeder w/Drive, 8” ScrewConveyor w/Drive & Swivel Rated @ 1000 Lb./Hour, TOLEDO Mdl. UMC600 Load Cell ScaleSystem w/Digital Readout, ALLEN BRADLEY SLC5/03 PLC Controls w/Panelmate.72” x 7’6” Long Swivel Furnace Charge Feeder w/Hyd. Swivel & Hyd. System.NORTH AMERICAN Gas Fired Ladle Preheat System Equipped w/Gas System,Blower, Controls & Stand 46” Dia. Ladle Hood.Furnace Water System w/(3) 40HP GORMAN RUPP Pumps & Motors, 20HP Pump &Motor, SCHAEFER Sodium Hydroxide Treatment System w/Controls, BAC Closed LoopCooling Towers w/Blowers.

MOLDING1983 ACU-FLO Sand Mold 4000 Lb. Auto Pour LadleSystem w/(3) Vessels, Gas Fired Vessel Preheat Station, Lids,Lining Forms, PANASONIC Monitor, ALLEN BRADLEYDTAM PLC Controls.

LECTROHEARTH 9’ Dia. 15-T Capacity Electric HoldingFurnace w/Hyd. Tilting System, Magnetic Power Supply Type K-1395, 450 KW DC, 4800 Volt Input, 10,000 Amp Output, ITE Cat#7850-V2-77 1000 KVA Disconnect 4800 Volt Primary, ControlSystem w/Digital Readouts.

INDUCTOTHERM Coreless Induction Furnace System w/Water System, Heat Exchanger, Shell Furnace, Tap Change Transformer, Ground Leak Detection, Melt Manager & Remote Operations Console

Powered Charge Car w/Controls

ASSETS NO LONGER REQUIRED IN THE ONGOING OPERATIONS OF:

1000 RUST STREET, SAGINAW, MI10:30 AM • WEDNESDAY, OCTOBER 23RD

INSPECTION: TUESDAY, OCTOBER 22ND, 9 AM-4 PM & MORNING OF SALE

EATON CORPORATIONCOMPLETE AUTOMATIC IRON FOUNDRYCOMPLETE AUTOMATIC IRON FOUNDRY

ASSETS NO LONGER REQUIRED

IN THE ONGOING OPERATIONS OF: 1000 RUST STREET, SAGINAW, MI10:30 AM • WEDS., OCT. 23RDEATON CORPORATION COMPLETE AUTOMATIC IRON FOUNDRYCOMPLETE AUTOMATIC IRON FOUNDRY

1993

AJAX 6,000 Lb. Brass Vertical Channel Melting Furnace

1996

1984

1997

15-T Chip Bin

2 AVAILABLE

1960’s19

83

LECTROMELT 4-T Cap. Electric Arc Melting Furnace, Mdl. QT VENETTA Scrap Preheat System

Continued on Next Page.

1976 DISAMATIC Mdl. 2013 MKIII Automatic Molding Machine Equipped w/1986 Mdl. 2043 CSE Automatic Core Setters/n 86.2275, 1986 Automatic Core Delivery System w/14” Delivery Belt Conveyor, Lift Table, Hyd. Pusher w/Hyd. System, Bottom BoardReturn Roller Conveyor, Core Inserter & ALLEN BRADLEY PLC Controls, Surge Tank, WORTHINGTON Refrigerated Air Dryer Mdl.15A s/n 5-8406 Rated @ 200 SCFM, Pattern Plate Heating Oven, 12 Meter AMC Automatic Mold Conveyor, ROBERTS 72’ SBCSynchronized Mesh Belt Conveyor w/25HP Hyd. Drive System, s/n 76.2058

#1

#2

#2

#1

1990

ASSETSNOLONGERREQUIREDINTHEONGOINGOPERATIONSOF:

2100 SOUTHCLEARWATERDRIVEDESPLAINES, IL

10:30AM,TUES., OCT. 22

THECHICAGOFAUCET

COMPANY

BRASS FOUNDRY BRASS FOUNDRY

ASSETSNOLONGERREQUIREDINTHEONGOINGOPERATIONSOF:

1000 RUSTSTREET, SAGINAW, MI10:30AM,WEDS., OCT. 23

EATONCORPORATION

COMPLETE AUTOMATICIRON FOUNDRY

COMPLETE AUTOMATICIRON FOUNDRY

THINKING OFHAVING

AN AUCTION?NEED AN

APPRAISAL?KNOW OF A

PLANT CLOSURE?CALL:

(818) 508-7034Ext. 12

biditup!11426Ventura Blvd. Second FloorStudio City, CA 91604

James Stachurski, Auctioneer, IL LIC #041000514

VISIT:www.biditup.comFOR ADDITIONAL ONGOING LIQUIDATIONS

& ONLINE SALES

FIRST CLASS PRE-SORTMAIL U.S. POSTAGE

P A I DPERMITNO.32365LOS ANGELES, CA

TERMS

From Route 75 North Or South: Exit at Exit 149 (Route 46).Follow Route 46 West 3.3 Miles To The Plant On Left Side

From Chicago Ohare Airport: Exit Airport And Proceed To Route 294 North, 1/2 Miles To NW TollroadRoute 90 West. Proceed Past Toll Booth To First Exit Route IL 72 (Lee Street). Turn Right Onto W Higgins.Turn Left Onto IL 72 Approx. 1/2 Mile To Wolf Rd. Turn Right On Wolf Rd Approx. 1/2 Mile To Howard St. TurnLeft On Howard Approx. 1/3 Mile To Clearwater. Turn Left To End. Plant Is On The Right Side.

DIRECTIONS to Chicago Faucet Company DIRECTIONS to Eaton Corporation

SAND MULLER

DUST COLLECTORS

SIMPSON Mdl. 22G Continuous Sand Muller w/Dust Hood, CompactabilityController, (2) Bond Feeders, Water System, Compactability Discharge BeltConveyor 12” x 6’ Long, s/n E7609001 • 30” x 133’ MULLER Discharge BeltConveyor w/Shaft Mounted Drive & Reducer • 5’ Dia. Sand Bin 270 Cu. Ft.Capacity w/8’ Dia. Rotary Plate Feeder & Drive • 30” x 21’ Long Sand BeltConveyor w/Shaft Mounted Drive & Reducer • 24” x 13’ SANDARATOR BeltConveyor w/Shaft Mounted Drive & Reducer, 70 Cu. Ft. Surge Hopper.

(2) 1997 BHA 30,000 CFM Pulse Dust Collectors w/100HP Blowers &Motors, BHA Sequential Controllers, 11,189 S.F. Cloth Area, 2.7/1 Ratio s/nCN131098,99 • BACT II Approx. 30,000 CFM Pulse Dust Collectorw/150HP Motor & Blower, Screw Conveyor Discharge • 30HP Pulse TypeRound Dust Collector w/CHICAGO Mdl. 22 1/4 Blower & Motor, Rotary AirLock & Controls.

AIR DRYERS

LADLES

ZURN Mdl. R140A Compressed Air Dryer, Rated at 700 SCFM, s/nR13953 • ZURN Mdl. Hl40 Regenerative Compressed Air Dryer, Rated@ 234 SCFM, s/n HL2039 • VAN AIR Mdl. Rad 250-460-3x60xCompressed Air Dryer, Rated @ 250 SCFM, s/n 96D4T-TF436-08A • 1983ZURN Mdl. R40A Compressed Air Dryer, Rated @ 200 SCFM, s/n R13780.

SILOS1983 SCHULD Mdl. 60-55#, 12’0” Dia. x 42’ Tall Skirted Sand Silow/Anti Segregation 7.5HP Vacuum Blower, Bin Vent Dust Collector,Truck Feed, s/n 19340 • Shop Built Sand Silo w/Supports & Truck Feed.

SAND TRANSPORTERSSAND MOLD Mdl. 5A Dryveyor 2” Sand Transporter s/n PNT-153 •NEWAYGO 2” Driveyor Sand Transporter s/n PNP573 • SAND MOLD 2”Sand Transporter w/Hopper & Supports s/n PNT-162.

VACUUMNFE Mdl. 230 Hyvac Vacuum 30HP w/Controls, s/n 1148.

SAND & MET LABDIETERT Mdl. 315 Sand Rammer w/84616 w/Base, Pedestal & Filler • (3) DIETERTMdl. 276 Moisture Testers • (3) DIETERT Mdl. 338 Electric Permmeters •DIETERT Mdl. 405 Sand Strength Machine s/n 0442 • METTLER Mdl. PB3000Balance w/Digital Readout • (2) BUEHLER Desiccator Cabinets • BUEHLER1/3HP Double End Grinder • JARRELL ASH Mdl. Atom Comp 7000 DirectReading Spectrometer Cat# 80/112 w/Computer & Printer, s/n 2482.

CORE ROOMISOCURE Core System To Include Receiving Hopper, KLOSTERHeater/Cooler w/Blower, Gas System, Cooler & Controls, KLOSTER 100 Lb. PerMinute Continuous Sand Mixer w/Powder Feeder, Hopper & Controls • 1986SHALCO Mdl. 4-101B Automatic ISOCURE Core Machine s/n S-6038Aw/Gas Generator, Bottom Board Feed System, Core Pickoff & Pick & Place Setterw/Hyd. Pusher & Hyd. System, SHALCO Mdl. M800 Gas Scrubber s/n S-6039A.

MISCELLANEOUSSkid Mounted Clipper, Mdl. HD-50 14” Wet Block Saw, s/n 9476 w/Enclosure &TORIT Mdl. 84 Dust Collector, s/n 67920 • AUTOMATIC WELDING Mdl. MavrixInoculation II Wire Feed System • 4” Belt Grinder w/Drive • EVERETT Mdl.20 20” Chop Saw, 10HP w/Air Clamp, s/n 3-8739 • G/K Mdl. 30.45.5 36/30” x45’ Discharge Oscillating Conveyor w/Drive, s/n C4709.1. • BALDOR Mdl. 11/2 10” Double End Pedestal Grinder s/n 1021WD • SETCO, Mdl. 102-210-8SPL 1HP 8” Double End Pedestal Grinder, s/n 100533 • EVERETT Mdl. 12M12” Chop Saw w/Enclosure, s/n 3-1518 • DAKE Mdl. 2 1/2 Arbor Press • ALLENBelt Driven Drill w/13” Throat, 21” x 24” T Slotted Table • DAYTON Mdl. 2Z646B1”/8” Disc Sander • TRINCO Bench Mdl. 2 Hand Blast Cabinet w/DustCollector, s/n 29003-6 • Lot Of Misc. Machine Parts Including Motors, Pulleys,Idlers, Cooler Clutch, Muller Clutch, New JOSLYN Switch, DISA Pattern Plates, G/KDrives, New 1.5SM Cooler Gearbox, New 8SM2F Muller Gearbox, DIDION Liners, G/KMdl. FRC 36.10 36” x 10’ Feeder s/n C5200.2, Misc. Gearboxes, Belting, 5- ElectrodeHolders, Electrode Arms, Furnace Rings, Ladle Lining Forms, Arc Furnace Leads, Etc.

CLEANINGWHEELABRATOR Mdl. 22 C.F. Tumblast Cleaning Machine w/Controls,& Shot System, s/n A124059 • (2) WHEELABRATOR 22 Cu. Ft. TumblastCleaning Machines w/Common Load System To Include Hopper, 24” x Approx.20’ Cleated Incline Belt Conveyor w/Drive, Traveling Bucket Loader, & Controls.

(3) I.E. 46” Dia. Motorized Teapot Ladles w/Square Bail, s/n 780701,76834-1,2.(2) Modern 28” Dia. x 36” Motorized Lip Pour Ladles w/Square Bail.

SAND COOLERSIMPSON Mdl. M-100 Multi-Cooler Mdl. 215F s/n E7609002 w/Dust Hood,Cyclone w/Rotary Air Lock, AGET Mdl. FT40-SV-SP Dust Collector s/n 5939.

MAGNETSOHIO Mdl. 55ANX 55” DC Crane Magnet 230 Volt DC 58 Amps, s/n 14146.OHIO Mdl. 55DAWX 55” DC Crane Magne t 230 Volt DC, s/n 12819.

SCALES(3) AND Mdl. FV-150K Alloy Scales 300 Lb. Capacity s/n 130920,21,2215” x 21” Platform • WEIGHTRONIX Mdl. WI-130 10,000 Lb. 4’x 4’Platform Scale w/Digital Readout, s/n 4311 • HYDROWAY 10,000 Lb. DialType Crane Scale w/Stand • (2) HYDROSCALE 4000 Lb. Capacity DialType Crane Scales • TOLEDO Mdl. 3025 Alloy Scale s/n 130648.

CRANES & HOISTS7.5-T Scrap Bridge Crane, Cab Operated, Double I Beam Construction,Approx. 25’ Span • 5/1-T Furnace Charge Bridge Crane w/3 Way PendentControls, Approx. 25’ Span, Double I Beam Construction • (2) YALE 7.5-TElectric Hot Metal Pouring Hoists w/3 Way Pendent Controls & MonorailSystem • (2) YALE 3-T Electric Hot Metal Pouring Hoists w/3 WayPendent Controls, Ladle Tilting Controls & Monorail System • C/M 1/4-TElectric Hoist w/Pendent Controls & Monorail System.

SAND SYSTEM

CASTING HANDLING

SAND MOLD SYSTEMS Sand Addition System To Include Bottom Hopperw/Hood & Discharge Belt Conveyor & Drive, Approx. 40’ Tall Bucket Elevator,Sand Hopper w/6’ Dia. Live Bottom Feeder & Supports, Discharge Belt Conveyor18” x Approx. 25’ Long w/Drive • 30” x 50’ Long Return Sand BeltConveyor w/Magnetic Head Pulley, Shaft Mounted Drive & Reducer • 30” x53’ Long Return Sand Belt Conveyor w/Shaft Mounted Drive & Reducer• DINGS Mdl. Spec B/M 24” x 4’ Cross Belt Magnetic BeltConveyor 2000 Watt 115 Volt Dc, s/n 1-84561 • New Sand Additive Tank12’ Dia. w/Supports & Sand Mold 24” Rotary Plate Feeder & Drive • 26” x 54”Return Sand Bucket Elevator 29’8” High w/Drive • 5’ Dia. x 12’ RotaryScreen w/Drive • 30” x 74’ Long Return Sand Belt Conveyor w/Shaft MountedDrive & Reducer, 2- Plow Stations • (2) 10’ Dia. 1200 Cu. Ft. SandHoppers w/8’ Dia. Rotary Plate Feeders w/Drives • 30” x 106’Return Sand Belt Conveyor w/Shaft Mounted Drive & Reducer.

1990 CARRIER Mdl. HH1-32120F3/8 40/32” x 9’ x 10” DeepOscillating Conveyor s/n 21619 5HP Drive • 1990 DIDION Mdl. RS100Rotary Shakeout w/Variable Speed Drive & Enclosure • 1983 G/K Mdl. SCRT36/48.50 48/36” x 50’ Casting Accumulating Conveyor s/n C5028.1w/Hood, Moisture Controls, SAI Casting Scale w/Load Cells & Digital Readouts •1983 G/K Mdl. TM36.13 180˚ De-Accumulating Conveyor s/n C5028.2 •1983 G/K Mdl. SC12.15 12” x 15’ Sand Oscillating Conveyor s/nC5028.3 • 1978 DIDION Mdl. RS-100 Rotary Shakeout w/10HP Drive &Discharge Enclosure, s/n 14SR608SR6048 • 1983 G/K Mdl. TDSCSC 66.3466/60” x 34’ Sorting Oscillating Conveyor s/n C5028.5 • 1983 G/KMdl. 24/30.8 30/24” x 8’ Reversing Oscillating Conveyor s/n 5028.8 •48” Power Roller Conveyor System Approx. 15’ Long w/Drive.

LECTROHEARTH Electric Holding Furnace

DIDION Rotary Shakeout System, Mdl. RS100, Vari-Speed G/K Casting Accumulating Conveyor, Mdl. SCRT 36/48.50 G/K De-Accumulating Conveyor, Mdl. TM36.13 G/K Sand Oscillating Conveyor, Mdl. SC12.15 G/K Reversing Oscillating Conveyor, Mdl. 24/30.8

BHA 30,000 CFM Pulse Dust Collectors, BHA Sequential ControllersOHIO DC Crane Magnet,Mdl. 55ANX

Crane

YALE 7.5-T Electric Hot Metal Pouring Hoist

SIMPSON Continuous Sand Muller, Mdl. 22G NEWAYGO Driveyor & SAND MOLD SandTransporter View of Sand & Met Lab NFE Hyvac Vacuum, Mdl. 230

biditup!An Industrial Assets, Inc. Company

11426 Ventura Blvd., 2nd FloorStudio City, CA 91604

P: 818.508-7034F: 818-508-3025

www.biditup.comemail: info@biditup.com

ASSETS NO LONGER REQUIRED

IN THE ONGOING OPERATIONS OF: 1000 RUST STREET, SAGINAW, MI10:30 AM • WEDNESDAY, OCTOBER 23RDEATON CORPORATION COMPLETE AUTOMATIC IRON FOUNDRYCOMPLETE AUTOMATIC IRON FOUNDRY

Sale Conducted by: biditup!, Subject to our customary terms of sale, (Availableat the auction site on the day of the sale), and any and all amendments andmodifications announced by the auctioneer at the time of the auction. The auc-tioneer and seller make no warranties or guarantees, expressed or implied, asto the defects in or the correctness or accuracy of the descriptions in anyadvertising of any item(s) being auctioned and will not be responsible for anyadvertising discrepancies or inaccuracies of any kind. All items sold will be onan “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUT EXCEPTION”and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE”. AUCTIONEER ANDSELLER MAKE NO WARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED ORIMPLIED AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF THE ITEM(S)

BEING AUCTIONED OR ITS (THEIR)SUITABILITY FOR ANY USE. AUCTIONEER ANDSELLER EXPRESSLY AND SPECIFICALLY DISCLAIM WITHOUT LIMITATION ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCI-DENTAL DAMAGES. It shall be the buyer’s obligation to verify information anddescriptions of property prior to sale. biditup!, and its advertising agencyassume no liability for errors or omissions in this brochure. The auctioneerdoes not warrant the age,accuracy, genuineness, authenticity, description,weight, count or measure of any listings specified herein. Although it is notlikely, auction sales are subject to cancellation or postponement, and some-times items are withdrawn from the sale, kindly contact biditup!, prior to trav-

el as there will be no reimbursements. On the day of the sale, all successfulbidders must immediately pay the full purchase price in cash, certified funds,cashiers check, wire transfer or company check with a letter from the buyer’sbank guaranteeing unqualified payments to biditup! Your letter should be sim-ilar to the following: [Mr. “Customer Name” is a customer of this bank. Thisbank will guarantee unqualified payment to biditup! on the account listedherein up to the amount of $______. This letter is valid until 30 working daysafter the auction sale.] Company checks without letter from bank guarantee-ing unqualified payment will not be accepted. The failure to make paymentpromptly shall be considered default and each lot or lots so purchased will beplaced for resale. The buyer must pay the total invoice price for all the lots pur-

chased before any removal can begin. All buyers must pay applicable sales tax(unless evidence of exemption is provided to auctioneer’s satisfaction). Buyersare responsible for the transportation, associated costs and risks involved inthe removal of purchased item(s). Certain items may contain residual chemi-cals and/or hazardous materials. The purchaser(s) hereby indemnify and holdharmless the auctioneer and seller from any and all damages, claims or liabil-ity from any injuries to persons or property of any type whatsoever causedduring the sale of, during the removal, or during use or operation of the pur-chased item(s). If you are unable to attend, please contact us regarding plac-ing a proxy bid. ALL ITEMS SUBJECT TO PRIOR SALE. PLEASE NOTE: All salesare subject to a 10% buyer’s premium.

WHEELABRATOR Tumblast CleaningMachine, Mdl. 22 C.F.

JARREL ASH Direct Reading Spectrometer, Mdl.Atom Comp 7000 View of Core Room

DISAMATIC Automatic Molding Machine, Mdl. 2013 MKIII

1983

Chip Feed System NORTH AMERICAN Gas Fired Ladle Preheat System ACU-FLO Sand Mold 4,000 Lb. Auto Pour Ladle System

1990 19

8319

8319

8319

83

2 AVAILABLE

1997

3 AVAILABLE 2 AVAILABLE

OHIO DC Crane Magnet, Mdl. 55DAWX

September 24Assets Formerly of: ROPER CORPORATIONChattanooga, TNSTAMPING FACILITY

October 1

EDGEWIND SALES & MFG.Tecumseh (Windsor), Ont., CanadaSTAMPING FACILITY

October 15

LENNOX HEARTH PRODUCTSLynwood, CAMFR. OF FIREPLACE EQUIPMENT& HARDWARE

#1

#2

#3

MODERN Motorized Lip Pour LadlesI.E. Motorized Teapot Ladle

DIDION Rotary Shakeout, Mdl. RS-100, 10HP

UPCOMING AUCTIONS

#2

#1

#2

2 AVAILABLE