by: raymond tyler dalke dr. jan brink mr. mark weller
TRANSCRIPT
STEEL IDENTIFICATIONTHROUGH
SPARK OBSERVATIONBy:
Raymond Tyler DalkeDr. Jan Brink
Mr. Mark Weller
Introduction
• Steel Manufacturing• Open Hearth Furnace• Basic Oxygen Furnace• Electric Arc Furnace
• Steel Categories• Killed• Semi-Killed• Rimmed• Capped
• History of Spark Testing• 1909-1970’s
Why Spark Testing?
• Cost• Availability• Ease of Use
Spectrometer
198.78922 278.76615 352.74466 435.06593 528.47135 614.89235 695.24498 766.10953 857.512410
50
100
150
200
250
1018 Plain Carbon Steel
1018
Wavelength (nm)
Counts
589.07 C
259.79 Fe
Methods of Spark Testing
• Grinding Wheel• Prototypes
• Compressed Air
1015 Plain Carbon Steel
Apparatus
• Baldor 8 inch Bench Grinder• ¾ Hsp• 3600 RPM• 2.4 Amp• Serial# G8-165-11• Coarse grit Al2 O3
grinding wheel• Medium grit Al2 O3
grinding wheel
Medium Grit Abandoned
• 1015 plain carbon steel
1 2 3
Apparatus
• Mounting Arm• 2”x 2” box tubing• One- 5/16”-18 x 1 ¼” machine screw• One- 5/16”-18 x 2” bolt
Apparatus
• Current Backboard• 2 – black poster boards• Inch scale
• Future Backboard• 2”x 2” pine studs (frame)• 40”x 45” black background ¼” paneling• Inch scale
Mounting Apparatus
• Remove eye shields, tool rest, and guards• Utilized the existing bolt holes• Loctite®!!!
Specimens Tested
• Plain Carbon Steel• 1015• 1018• 1045• 1075• 1095
• Alloy Steels• 1215• 4140• 4340
• Tool Steel• O1• D2
• Stainless Steels• 17-4• 303• 316
• Others• Gray Cast Iron
Procedure
• Observe Safety!• Mount Specimen• Turn on grinder• Prepare camera and turn off lights• Swing mounting arm into grinding position• Stand back roughly 4 foot and take six pictures• Return mounting arm to non-grinding position• Turn light on and align pattern density card• Take two readings, a 10 second and 30 second blast on
separate cards• Turn grinder off• Measure the force applied to grinding wheel• Record measurements• Upload photos using Image J software and record data
Data Measured
• Rockwell Hardness• Brinell Hardness• Spark Length• Projected Angle• Angle of Extremes
Image J
Spark Length
Angle of Extremes
Projected Angle
Results
• Average Force3.3 Newtons = .74 lbs
• Average projectedangle -58.35° from the positive x-axis
• Measured RPM 3575
Spark Testing
Type of Steel HRC Brinell Spark Length(in.)
Angle of Extremes
(°)
1015 55.67 560 44.82 17.36
1018 50.67 475 35.93 27.08
1045 61.00 670 38.83 34.48
1075 83.00 N/A 30.96 27.62
1095 86.67 N/A 24.73 25.94
1215 57.33 601 40.13 27.86
4140 60.33 653 33.98 27.01
4340 53.33 530 37.41 32.25
O1 61.67 670 28.24 26.12
D2 58.00 620 14.26 16.72
17-4 Stainless 79.33 N/A 22.86 30.32
304 Stainless 75.33 N/A 12.51 25.26
316 Stainless 78.00 N/A 22.13 25.79
Gray Cast Iron 58.67 620 5.24 11.64
Pattern Density Cards
Spark Detail
1015 Plain Carbon Steel
1095 Plain Carbon Steel
Comparison Chart
Further Research
• Lab Experiments• Thermal Imaging• Pneumatic Fixture
References
• American Society of Metals (1978). Metals Handbook: Properties and selection: Irons and Steels. (Ninth Edition).Library of Congress Cataloging in Publication Data. United States of America
• DeGarmo, E. P., Black, J. T., Kohser, R. A., and Klamecki, B. E.(2003). Materials and Processes in Manufacturing. (Ninth Edition) Hamilton Printing. United States of America
• Stookey, D. and Dargan, N.(1967). Spark Testing Training Manual• Tschorn, G.(1963). Spark Atlas of Steels. The Macmillan
Company. New York• Azzouz, S., Brink, J., and Weller, J. M.(2011). Material Science
Lab Manual• www.steel.org• www.matweb.com• asm.matweb.com• www.azom.com
Special Thanks
• Dr. Magaly Rincón-Zachary• Dr. Jan Brink• Mr. Mark Weller• Dr. Jonathan Price• Dr. Rebecca Dodge• UGROW
Questions?