by integrated paving concepts inc. · for decorative stamped asphalt tooling templates infrared...
TRANSCRIPT
G e n u i n e S t a m p e d A s p h a l t
makers of
for decorative stamped asphalt
tooling templates infrared equipment
by Integrated Paving Concepts Inc.
catalogpattern
patternspopular
Brick Size: 4”, 8”, 10“ and12”(10.1, 20.3, 25.4, and 30.4cm)
Brick Size: 4-7/8” x 9-3/4”(12.3cm x 24.7cm)
Diagonal Herringbone
Brick Size: 4"x12" (10.1cm x 30.4cm)
Brick Sizes: 3” to 4“ x varies (7.6cm to 10.1cm x varies)
Brick Size: 4-1/2” x varies(11.4cm x varies)
Brick Size: 3” to 16”(7.6cm to 40.56cm)
Brick Size: 4-7/8” x varies(12.3cm x varies)
Tradit ional Brick
O�set BrickBrick Size: 4-3/4"x9-5/8"
(12.4cm x 24.3cm)
Frisco CobbleBrick Sizes: 5-3/4"x 5-3/4"
and 11-3/4” (14.6cm x 14.6cm and 29.8cm)
HerringboneBrick Size: 4-7/8” x 9-3/4”
(12.3cm x 24.7cm)
Tile Sets Ashlar Slate
Basketweave Eurofan Scallop British Cobble
Patterns shownO�set Brick with Double Texas Cobble Border
G e n u i n e S t a m p e d A s p h a l t
Arches3’-3” up to 73’-2” Radius(1m to 22.2m Radius )
Wheelchair3’-10” x 4’-3”
(1.1m x 1.3m )
patternspopular
Random SlateBrick Size: varies 4” to 1’-4”
(varies 10cm to 40cm)
Random CobbleBrick Size: varies 8” to 2’(varies 20cm to 60cm)
Random StoneBrick Size: varies 8” to 12”
(varies 20cm to 30cm)
Thompson Stone
Brick Size: varies 1’to 3’(varies 30cm to 90cm)
Stone
B orders Accents & Sp ecial Use
Scallop
G e n u i n e S t a m p e d A s p h a l t
Patterns shownRandom Slate & Scallop with Texas Cobble Border
Brick Size: 4-7/8"x8-7/8" (12.3cm x 22.5cm)
Brick Size: 4-7/8"x8-7/8" (12.3cm x 22.5cm)
Brick Size: 4-7/8"x8-7/8" (12.3cm x 22.5cm)
Soldier Course
Double Stacked Brick
Brick Size: 8-7/8"x8-7/8" (12.4cm x 24.3cm)
Brick Size: 8-7/8"x8-7/8" (12.4cm x 24.3cm)
Double Texas Cobble Texas Cobble
End-to-End
Stacked Brick
Brick Size: 4-7/8"x8-7/8" (12.3cm x 22.5cm)
Four-Square 8’ x 8’(2.4m x 2.4m)
Hopscotch 14’ x 2’-6”(4.2m x .76m)
Playground
1.800.688.5652www.streetprint.com
Integrated Paving Concepts Inc.Suite 102 17957 55th AvenueSurrey, BC V3S 6C4 Canada
PMB 48 – 936 Peace Portal DriveBlaine, WA 98230-4040
Custom StreetPrint Template Design Parameters StreetPrint designs can range from traditional brick patterns to custom-ized motifs and logos. The installation and manufacturing processes can place some limitations, not only on what can and cannot be done, but what looks aesthetically pleasing as well. Manufacturing and Installation considerations should be taken into account when thinking about using custom StreetPrint patterns.
9'-438"
3'-6 18 " 13'
14'
The templates are constructed of 3/8”
swaged wire rope pieces welded together to create
a pattern.
templatescustom stamping
The spacing between the welds should be a mini-mum of 3” (76mm) apart, and a maximum of 12” (305mm) apart.
3" min. 12" max.
Manufacturing Limitations
3" min. 12" max. When welds are closer or spanning farther than
recommended, a number of problems can occur: welding di�culties, dense and heavy templates, or �imsy non-rigid templates
Template Sizing & Pattern
Template Size – For production & applicators in the �eld, template size is important for handling. The recom-mended size for a repeatable template is about 9’x6’ (2.7m x 1.8m).
Pattern Consideration - Repeatability & Interlock – It is most ideal to create pattern that can repeated, mirrored, and overlap onto itself within the 9’x6’ (2.7m x 1.8m) recommended template size. This is to provide maximum �exibil-ity to the applicator in the �eld, and to limit confusion and installation mistakes.