buyer’s guide - wcma...36th edition buyer’s guide wood component manufacturers association...

36th EDITION

Buyer’s GuideWOOD COMPONENT MANUFACTURERS

ASSOCIATION 2019-2020

YOUR SOURCE FOR COMPONENTS • WWW.WCMA.COMPublished by Photo: Yoder Lumber Company

2 2019-2020 WCMA Buyers Guide wcma.com

The North American woodworking industry should continue to prosper,

with the outlook for cabinetry, furniture, architectural millwork and retail

fixtures projected to grow. This bodes well for dimension and wood com-

ponents manufacturers that supply products to these segments.

A recent survey by more than 200 component and dimension producers

found the vast majority supply products to the residential market, primarily cabi-

netry for kitchen, bath and home organization/closets. Supplies to the commer-

cial market are not shabby either, with contract furniture, commercial cabinetry

and building products, including millwork for windows, also getting high marks.

Sales and business performance information was compiled in the second an-

nual Wood Components Benchmark Study, conducted online February through

March by the Wood Component Manufacturers Association, the Wood Products

Manufacturers Association and Woodworking Network.

With participants able to select multiple industries, of those that responded

to the query, 90% sell into residential cabinetry, and 60% to residential

furniture, compared to 66% for commercial cabinetry, and 46% contract

furniture. Of the remaining markets, 59% had sales for building products,

60% decorative/specialty and 23% provided some level of industrial products.

A drill-down of some of the product offerings is below.

For information about the study or the sponsoring associations, contact the

Wood Component Manufacturers Association at WCMA.com, and the Wood

Products Manufacturers Association at WPMA.org.

Second annual benchmark study includes information on top markets and product sales, plus business trends.

WCMA Market trends: Wood components study

See us at AWFS Booth #4642


Advocacy, networking and industry promotions are just some of the ways the Wood Component Manufacturers Association helps North American producers grow their business.

WCMA Membership – Now more important than ever!

If you are a manufacturer of wood components

or dimension stock, membership in the Wood

Component Manufacturers Association is now

more important than ever. The WCMA was founded

in 1929 with the goal of establishing and maintain-

ing specifications and commercial standards for the

hardwood dimension manufacturing industry, and to

aid in the development of the industry. As member-

ship grew, the association committed to becoming

a progressive, nationally-recognized association fo-

cused on meeting the needs of its members. A list of

WCMA members begins on page 13 of this guide.

WCMA membership involves many things, but first

and foremost it provides access to a wide range of

industry experts. Your colleagues are often your best

source for in-depth insight and ideas. WCMA gives you

the opportunity to connect with industry professionals

across the United States and Canada, and members

share openly, freely, and with great enthusiasm. In ad-

dition, the association offers the following to members:

Fall Conference & Plant Tour Event: Each year,

the WCMA hosts a Fall Conference and Plant Tour

Event. By touring dimension and component manu-

facturing facilities, members see the latest technology

at work, witness working solutions to common prob-

lems, and exchange information with seasoned coun-

terparts. Held in the fall each year, this event enables

members to conduct their own field research as well

as gather a host of money-making, money-saving

ideas. See page 8 for information on the 2019 event.

Spring Annual Meeting: The WCMA has reintro-

duced the WCMA Spring Annual Meeting for members

and Technology Partners. To learn more about the

2020 event, see page 8.

One-Day Plant Tour Regional Event: In 2018,

the WCMA hosted its first One-Day Plant Tour Re-

gional Event. This event focuses on a specific region

and is short enough to be out of the office only one

day, yet still see advanced manufacturing plants.

Our 2019 event will take place in June, in Lexing-

ton, Kentucky. Visit WCMA.com for information.

Get New Business: Sales inquiries from com-

ponent buyers are received by the WCMA office on

a regular basis. The WCMA’s Member Match™

Program is a system that provides prospective buy-

ers with a list of all WCMA members who can pro-

duce the specific component products they need.

The service is free of charge to component buyers

and WCMA members, and can be accessed on our

website WCMA.com in the Source Guide area.

National and International Promotion: The

WCMA recognizes the need for increased promotion

and has increased its marketing efforts for members

and the wood component industry as a whole. Ex-

hibiting at trade shows throughout the world, partici-

pating in specialized industry events and seminars,

publishing the Wood Components Buyer’s Guide, advertising in major woodworking magazines, and

maintaining a comprehensive website are some of

the ways the WCMA is promoting its members and

the industry. The WCMA also receives a number of

sales leads through our website and trade shows,

and these leads are then passed on to members.

Industry Support: Financial support is given to the

Hardwood Federation which serves at the hardwood

industry’s advocacy voice on Capitol Hill, as well as the

American Hardwood Export Council (AHEC) which pro-

motes American hardwoods globally.

Members’ Website: The newly designed WCMA

website WCMA.com features a simplified design,

improved functionality and more content to keep

members and visitors up-to-date on the latest news in

the secondary wood manufacturing industry. The site

is a resource where members can update their online

profile, register for meetings, keep current on industry

By Amy Snell, CAE

Executive Director

Wood Component Manufacturers Association

WCMA.com


wcma.com 2019-2020 WCMA Buyers Guide 5

issues and initiatives, “chat” with other members, and

more! Comprehensive and easy to navigate, it serves

as a one-stop site for all the information you need on

the industry, including the WCMA Labor Relations

Bulletin, Legislative News, Virginia Tech Housing Re-

ports, and other important Industry News and Events.

Industry Standards: The WCMA establishes and

maintains the “Rules and Specifications for Dimen-

sion and Woodwork.” A necessary addition to any

plant, the Rulebook covers dimension and component

grading rules, tolerances, and claim procedures for

domestic and export trade. It also serves as a guide-

line for buyers of dimension and component products

when specifying their component products. The pock-

et-sized Rulebook is available for $10.00 per copy to

non-members and is available free to members.

WCMA Mission Statement & Objectives: The Wood Component Manufacturers Association

advances and promotes the interests of the North

American wood products industry through interac-

tive and innovative manufacturing solutions. The

objectives of the WCMA are as follows:

• Promote a friendly exchange of ideas among

those engaged in the dimension and component

manufacturing business.

• Develop and promote a general demand for the

industry’s products and services.

• Collect and distribute useful economic and

technical information concerning industry trends and

developments.

• Serve as a business referral clearinghouse by re-

sponding to inquiries from dimension and component

buyers and passing this information on to members.

• Conduct seminars and meetings that will satisfy

the educational needs of our members.

• Establish and maintain standard rules and spec-

ifications for the dimension & components industry.

• Cooperate with other wood product trade as-

sociations and appropriate government agencies to

promote and protect the interests of the industry.

As a company in the wood components industry,

one of the wisest investments you can make is mem-

bership in the WCMA. To take advantage of these

many member benefits, visit WCMA.com today and

fill out the membership application. You can also con-

tact the WCMA office with any questions.

Wood Component Manufacturers Association

P.O. Box 662 Lindstrom, MN 55045Tel: 651-332-6332 Fax: 651-400-3502

Email: [email protected]: WCMA.COM



The WCMA offers a range of opportunities to help members keep pace with the fast-changing wood components industry.

WCMA What WCMA has to offer

The wood components market is changing at a

rapid pace, with material options/products, as

well as the fierce technology surge. The Wood

Component Manufacturers Association has an ac-

tive role in bringing people together to brainstorm, be

introduced to new technology and ideas, and expand

the influence of the industry moving forward.

Networking, international exposure, and growing

our future leaders is at the core of what we try to ac-

complish. I want to take this opportunity to share the

experiences and opportunities WCMA has to offer.

The WCMA helps bring us together to share expe-

riences and knowledge about the industry segments

in a non-competitive atmosphere. The association

works as a strong facilitator, gathering great wood-

working companies and pulling innovative visionar-

ies together to make the entire industry stronger

and more successful. And perhaps the number one

benefit of WCMA membership is the multitude of net-

working opportunities provided throughout the year,

including the European Plant Tour and the Fall Conference & Plant Tour events.

The European Plant Tour event, held March 2018,

was an amazing opportunity. Members and Tech

Partners on the tour all had positive takeaways.

Sponsored by Stiles Machinery and Pollmeier Inc. the

event included visits to highly automated factories

engaged in panel and solid wood processing, plus

tours of the HOMAG factory and Pollmeier sawmills.

The combination of the plant tours, networking with

members, and seeing how other businesses operate

was truly an incredible experience.

It is evident that utilizing automation to meet cus-

tomer’s needs, production times, to work around an

unreliable workforce, and efficiently produce the qual-

ity products is the direction our industry is heading.

In the high-paced world of on-the-go customers,

short lead times, high-tech processes and a feeling

that “we are just maxed out,” the WCMA provides

relief to members. Outsourcing wood products and

sourcing items that generate overhead and consume

valuable time that could be better used elsewhere is

what the WCMA is all about. In order to do this, we

need to continue to grow our membership and edu-

cate the next generation of workers.

WCMA provides a platform for wood industry lead-

ers to consult, share ideas, and plan for the future. If

you are interested in locating a supplier or would like

information about the WCMA, visit WCMA.com or

contact Amy Snell, Executive Director, at 651-332-

6332, [email protected].

By Steve Mashl

WCMA President

Valley Custom Door


On tap for 2019 are plant tours, conferences and more networking opportunities.

WCMA Networking: Conferences & plant tours

Each year, the WCMA conducts its flagship event, the Fall Conference & Plant Tour Event. The Fall Conference presents an excellent opportunity

for WCMA members to network and have open discussion on common con-

cerns. Attendees also tour the production facilities of several dimension, compo-

nent, cabinet, furniture, millwork, and related woodworking companies. These plant

tours provide attendees a unique opportunity to observe innovative woodworking

manufacturing operations and discover new manufacturing techniques, exchange

ideas, and learn about alternative manufacturing methods. Everyone comes away

with at least one good idea that can be implemented in their own plants.

The WCMA is very excited to be partnering with the Wood Moulding & Mill-

work Producers Association (MMPA) for the 2019 Fall Conference, Tech Ed, and Plant Tour Event. The two associations are joining forces to offer attend-

ees expanded educational opportunities, increased networking, personalized

meetings with suppliers, and unique plant tours. The event will be held Sept.

22-25, at the Astor Crowne Plaza in New Orleans, Louisiana. The event will give

attendees an excellent opportunity to learn how industry professionals stay up-

dated in areas such as woodworking machinery, equipment, tooling, supplies,

software and overall business solutions.

The 2019 Fall Conference, Tech Ed and Plant Tour Event will be open to

member companies of either association, as well as their industry suppliers.

Registration opens in May; visit WCMA.com for more information.

Networking with Tech Partners This year, WCMA Tech Partners will have the opportunity to participate in Pro-ductivity Information Exchange (PIE) sessions. These sessions match

customers with suppliers and allows for dedicated time to educate attendees on

their specific needs. Each Tech Partner is guaranteed two appointments with

manufacturing members when they register early. There will also be two recep-

tions which will connect leading providers of woodworking machinery, equip-

ment, supplies, software and other business solutions with WCMA members.

A listing of WCMA Technology Partners begins on page 10 of this Buyer’s

Guide. These companies are a great source for all your woodworking machin-

ery, tooling, software, and business solutions.

The WCMA Education and Programs Committee has been working hard to

ensure that there is something for everyone, so be sure to make plans now to

have Plant Managers and other key personnel in attendance. Program details

and registration for the WCMA Fall Conference & Plant Tour event will be

available in May. For more information about participating in this event, contact

the WCMA office at [email protected], or visit WCMA.com today.

2020 Spring European Plant TourWCMA will be hosting its third European Plant Tour event in 2020. Attendees

who have participated in this event in the past report such positive takeaways

and were impressed by the quality of the plant tours.

Steve Gerber, with Gerber Wood Products, stated “I found the quality of the

plant tours to be excellent. They offered a diverse view into the European phi-

losophy of manufacturing by utilizing more automation and technology, replacing

aging equipment quickly, and utilizing a wide range of wood composite materials.

I saw levels of automation in action that I had often dreamt of but never believed

were being applied in real woodshop applications. I left my week in Germany

inspired and ready to apply aspects of what I learned in my own business.”

You will want to participate in 2020. Plans are still being finalized, so be sure

to visit WCMA.com for more information.


WCMA Technology Partners provide the equipment, supplies and services needed to improve productivity.

WCMA Technology Directory

The Technology Partnership program connects suppliers of machinery, supplies, software and business solutions to WCMA member companies who utilize these products and services. Technol-ogy Partners have the opportunity to showcase and educate WCMA members on their newest technologies, products and services. The cen-terpiece of the program is the Technology Expo, held annually in conjunction with the WCMA Fall Conference & Plant Tour Event. To become a Tech Partner contact WCMA at 651-332-6332 or email [email protected]. Information on all Technology Partners can be found at WCMA.com, click on Suppliers.

ARMINIUS TOOLING INC.Arminius Tooling customers achieve excellent surface qualities on natural woods, veneer and MDF panels. They are innovators in profile [email protected] arminiustooling.com

BACCI AMERICA, INC.Bacci specializes in the production of machinery for the solid wood industry, including machines for chair manufacturing. [email protected] bacci.com

BIESSE AMERICABiesse, a leading manufacturer of machinery and systems, offers an extensive product range, exceptional after sales support, and value added services that include financing, training and educational seminars. Our product line includes 3,4 and 5 Axis CNC machines, wide belt sanders, panel saws, drilling and in-serting machines, automation and cutting-edge software. We deliver an innovative solution that guarantees high quality and great [email protected] biesse.com

BLACK BROS. CO.Black Bros. specializes in roll coating, adhesive spreaders, laminating equipment, material handling equipment, and custom engineered [email protected] blackbros.com

C.S. INDUSTRIES LLCC.S. Industries is the exclusive agent for International Wood Technology Moldrup. We are now working with WoodEye from Sweden, manufacturer of Scanners. We offer the WoodEye scanner independently or if you need turnkey rough mill project, together with Eagle Machinery from OH. Moldrup is a world leader in wood protection application equipment and specializes in complete turnkey plants for Hydro-Thermo Wood treatment for Hardwoods;

Pressure-treated Lumber, landscape timbers, etc. The CSI group also is a partner with Brookhuis America, offering strength graders plus handheld and automatic in-line moisture meters - one stop shopping for moisture [email protected] csi-llc.com

DOUCET MACHINERIES INC.Return conveyors, stackers, lateral feeders, clamp carriers, gluing equipment, door and drawer clamps, custom material handling, end-matchers, specialized sanders, drilling equipment and panel rip [email protected] doucetinc.com

EAGLE MACHINERY & SUPPLY, INC.Eagle Machinery & Supply Inc. is a world-class custom machinery and automation sup-plier specializing in dimension mill systems, optimization solutions for scanning, ripping and crosscutting, machining centers, material handling systems, and hydraulic systems. Eagle will integrate and control both new and existing machinery and has an extensive inventory of blower fans, electrical, hydraulic, and mechani-cal components. Eagle is the exclusive distribu-tor for all parts, service, sales, and support for WoodEye scanners throughout North [email protected] eaglemachines.comSee our ad page 3

FRANKLIN ADHESIVES & POLYMERSFranklin Adhesives & Polymers manufactures adhesives for the domestic and global wood furniture, millwork and engineered-lamination markets. They have led the way in the innova-tion of wood adhesives for many applications in

the wood product manufacturing plant. Under the brand names of Titebond, Multibond and Advantage, Franklin’s products provide superior performance in wood assembly, solid edge and face gluing, engineered product lamination and finger [email protected] franklinadhesivesandpolymers.com

FRIULMAC INC.Friulmac offers moulder feeders, single and double end tenoners, random length end match-ers, and end working solutions with endless work station combinations. They also offer on-site technical support and spare parts [email protected] friulmac.it

GREAT LAKES CUSTOM TOOL MFG.Great Lakes Custom Tool Mfg., Inc. (GLCT), a family owned company headed by Russ Martin and son, Ray Martin, and a team of 80 employ-ees, has been providing custom tooling to the wood and composite industries since 1979. They specialize in providing quality tooling specific to the application such as: PCD (diamond), Great-Loc® Dedicated Insert System, Great-Loc® SG Universal Tool System, Helicarb® (brazed or mechanically held twisted carbide bent to a known helix), brazed, solid carbide, high speed steel along with custom saw blades. Not only do they manufacture custom tooling, they modify and recondition tooling as [email protected] glct.com

HASKO INDUSTRIES, LLC.Hasko Industries, LLC is a US manufacturer of ripping, moulding, chopping, feeding, and material handling equipment for medium to high production rough mill and finished goods manu-facturing. Products include: optimizing gang rip saws and systems; 4 sided and 2 sided moulding equipment; lineal feed tables; lineal to lateral feed tables; sorting, grading, and nesting systems; high-speed chop saws that comple-ment the EBI scanning systems for rip and chop defecting and grade optimization; crayon mark and optimizing cut-off saws; custom machine designs; custom repair work; and field service, PLC programming and troubleshooting.423-648-5200 [email protected] haskomachines.com

JAMES L. TAYLOR MANUFACTURING James L. Taylor Mfg. Co. has 3 divisions: Taylor produces edge-gluing and laminating machinery; Cameron Automation features compact and intuitive optimization systems for the rip and chop areas of the rough mill, Cameron also has developed the Flooring Nester to automatically make nested bundles of flooring for the rough mill; and JLT Clamps supplies edge-gluing, door, and

drawer clamping machinery for smaller [email protected] jamesltaylor.com

LEADERMAC USALeadermac manufactures moulders, planers, ripsaws and grinders. Leadermac offers mould-ers for standard and special [email protected] leadermacusa.com

MEREEN-JOHNSON, LLCMereen-Johnson has been setting the standard for Leading Technology and Lasting Perfor-mance in the woodworking industry since 1905 and manufactures a complete line of fixed arbor and movable blade rip saws, single and double end tenoners (1-8 stations), panel sizing equipment, dovetailers, engineered materials processing equipment, and complete rough mill material handling [email protected] mereen-johnson.comSee our ad page 7

NAP GLADUNAP GLADU is one of the largest, most complete sources of quality cutting tools and services for the wood, metal, and plastic industries in North [email protected] napgladu.com

NEWMAN MACHINE COMPANY, INC.Newman manufactures high quality woodwork-ing machinery for the wood component, furni-ture, planer mill, sawmill, and pallet industries. They provide the best in parts and [email protected] newmanwhitney.com

SCANNING & CROSSCUTTING SAW

RIP SAWS & OPTIMIZING SYSTEMS

Eagle Machinery’s EagleEye Talon Vision saw combines two-sided vision-based defect scanning with high-speed crosscutting. The integration allows for ease of calibration and streamlined material flow. Benefits also include improved yield and reduced mainte-nance. Applications include: flooring, upholstery frames, mouldings, finger-jointing and cabinet components. 877-744-9447, eaglemachines.com Mereen-Johnson manufactures rip

saws and optimizing systems that fea-ture shifting blades and fixed arbor mul-tiple rip saws. The Model 524-DC/SR4 is a rip optimizing system with four moving blades that offers glue joint accuracy, reliability, higher yields, and the lowest overall total cost of ownership according to the company.888-465-7297, mereen-johnson.com


OSI MACHINERIEOSI Machinerie’s revolutionary Self-Centering Planer is your key to maximizing raw material yield, decreasing costs, and increasing overall product quality. OSI Machinerie’s End-Matchers are designed to meet the most stringent requirements of premium quality wood flooring manufacturers - from both a production quality and productivity standpoint. Our equipment is easy and cost-effective to set up, adjust, and maintain so that your team spends more time producing quality product - and less time fumbling to get the machines working or performing [email protected] osimachine.qc.ca

PENNSYLVANIA LUMBERMENS MUTUAL INSURANCE CO.Pennsylvania Lumbermens Mutual (PLM) is the oldest and largest mutual insurance company dedicated to providing property and casualty insurance to the wood products and building material industries. For over 100 years, PLM has insured wood manufacturers and distribu-tors throughout the U.S. For more information you can email us at [email protected]@plmins.com plmins.com

SCARLETT MACHINERYMachinery solutions for the woodworking industry. By combining years of knowledge, experience and the best machine tools in the industry, we provide manufacturing solutions designed to improve workflow and provide cutting solutions in most woodworking and non-ferrous applications. If you are looking for help choosing the best industrial machine for your needs, in a price range that fits your

budget, give Scarlett Machinery a try. [email protected] our ad page 9

SCM GROUPSCM Group is a leading manufacturer of ma-chinery and systems providing first class parts, service and support. Their products include 3, 4 and 5 axis CNC routers, panel saws, clamps, bore and dowel machines, presses, automation, moulders, tenoners, gang rip saws, wide belt sanders, plus classical machines for wood processing. The Industrial Division specializes in high technology machinery and systems for integrated manufacturing solutions. The Premium Division specializes in closed composition [email protected] scmgroup.com

STILES MACHINERYStiles has been helping manufacturers throughout North America achieve their goals for over 50 years. With world-class machinery backed by the nation’s largest team of service and support specialists, an extensive inventory of ready-to-ship parts, and the industry’s only nationally accredited workforce training program, Stiles is your solution for any challenge and

your partner in every success. Technologies including HOMAG and KENTWOOD moulders, CML rip saws, SALVADOR chop saws, and System TM optimizing systems are part of Stiles’ comprehensive range of solutions for processing solid wood [email protected] stilesmachinery.comSee our ad page 18

TECHNICAL SERVICES & REPAIR

MOULDING, PLANING & PROFILING MACHINE

Scarlett Technical Services says it is dedicated to providing customers with the highest quality assistance available with prompt response times. With fac-tory support from C.R Onsrud, Weinig and Holz-Her, the company says its in-house repair service and field service technicians have extensive experience in troubleshooting all related issues caus-ing crisis downtime.616-871-9889, scarlettinc.com

Stiles Machinery offers the MOULDTEQ M300, the first moulding solution from HOMAG. The CNC moulder combines HOMAG’s software solutions with robust mechanical engineering. The machine also features easy-to-use touchscreen controls, variable feed and spindle speeds, and quick setup with the pro-Lock spindle clamping system.616-698-7500, stilesmachinery.com

THERMWOOD CORP.Thermwood offers 3 & 5 axis CNC machining centers for the production, fabrication & trim-ming of wood, plastics, non-ferrous metals, composites and other advanced materials. Appli-cations include Nested-Based panel production, solid wood, Roller Hold-Down machines for upholstery frames as well as our award winning Cut Ready Cut Center which doesn’t require any programming. Others range from machining pat-terns and molds/plugs to trimming & machining products for industries such as woodworking, automotive, aerospace/aviation and defense. Thermwood has also developed a new Large Scale Additive Manufacturing (LSAM) system for producing industrial tooling, molds, patterns, masters, plugs and fixtures. Thermwood is a US-based company with dealers and distributors worldwide. In addition to machine manufacturing and software development, Thermwood has a service organization that provides support, machine installation, training, retrofits, custom programming and production [email protected] thermwood.comSee our ad page 5

TIMESAVERS, LLCFor over 70 years, Timesavers has been providing wide belt abrasive finishing machines for sanding wood, metal, plastics and a wide range of other materials. As a pioneer in sanding technology for the woodworking and machine tool industries, Timesavers leads the way in wide belt sanders. With unmatched service and support, over 50,000 machines in the field today and factory-trained independent distributors, you can be sure that Timesavers will deliver “The finest finish in the world.”[email protected] timesaversinc.comSee our ad page 4

VORTEX TOOL CO. INC.Vortex Tool Co., Inc. manufactures a complete line of solid carbide router bits for industrial woodworkers. Vortex also manufactures a wide

variety of custom tooling in both insert design, brazed carbide tipped and PCD. Vortex will service all makes and types of cutting tools and has unmatched technical customer support to assist with any application you may [email protected] vortextool.comSee our ad page 7

WEINIG HOLZ-HER USAWeinig Holz-Her USA is the industry leader in solid wood and panel processing technology and equipment. Specializing in innovative manufacturing solutions that enable mass-customization and improve efficiency, Weinig Holz-Her USA offers an array of equipment including moulders, cross-cut saws, rip saws, finger jointers, gluing presses, scanners, CNC machining centers, edge banders, beam saws, vertical saws, material handling equipment, along with fully integrated software solutions that manage and optimize production.Think Industry Excellence --Think [email protected] weinigusa.com


CNC MACHINING CENTER WITH AI

TOP & BOTTOM KNIFE PLANER

COMPRESSION TOOL FOR LAMINATED MATERIALS

Thermwood’s Cut Ready 43 features “Artie,” an artificial intelligence engine that allows users to make products without a CNC programmer. The com-pany says the system is capable of pro-gramming tens of millions of products and is constantly learning more. The Cut Ready 43 comes with a 5x8 table, 21-position tool changer, and high flow vacuum hold-down system.800-533-6901, thermwood.com

Available from Timesavers, the YieldSaver is equipped with top and bottom carbide insert cutterheads which automatically center each board between the top and bottom opposed cutterheads, allowing equal amounts of stock to be removed from both sides of the lumber. Timesavers says users can expect yields of 3%-plus, and a 12-month payback. 763-488-6600, timesaversinc.com

Vortex Tool says its new Series 9800 tornado compression tooling has been engineered for cutting laminated composite materials. The bit’s unique roughing and finishing flute design yields clean finished-edge quality while eliminating delamination of the mate-rial. Available in four sizes, Series 9800 tooling is offered with or without CVD diamond coating for increased tool life.800-355-7708, vortextool.com


WOOD COMPONENT MANUFACTURERS ASSOCIATIONAmy Snell, Executive DirectorP.O. Box 662Lindstrom, MN [email protected]

5-ACRE MILLHicksville, OHProducts: Short lead times, lean manufacturing, tight tolerances, challenging, made-to-order, FSC certified wood components, table tops & bases, cabinet doors & parts, stiles & rails, furniture parts, casket parts, chair parts, blanks, squares, edge-glued panels, butcher block, millwork, moldings, upholstered frame stock, table nosing, carved signs, cutting boards. Machining: Assembly, boring, CNC boring, CNC machining, routing, face & edge sanding, shaping, double-end cutting, panel processing and rip/cut/[email protected] See our ad page 8

AMERICAN MILLWORK, LLCElkhart, INProducts: Blanks, edge-glued panels, mould-ings, custom millwork, hand rails, prefinished mouldings & boards, S4S boards. Machining: Moulding, gluing, finger jointing, [email protected] americanmillwork.com

ANDERSON WOOD PRODUCTS CO.Louisville, KYProducts: Bed parts, stair rails, mouldings, fin-ger jointed parts, edge-glued panels, laminated squares, cut-to-size blanks. Machining: Edge-gluing, lamination, finger jointing, sanding, moulding, tenoning, boring, CNC routing, shaping, profile sanding, sub & full assemblies, finishing.502-778-5591ben.anderson@andersonwood.comandersonwood.com

ART FOR EVERYDAY INC.Toronto, ONProducts: Art For Everyday are the leaders in original architectural woodcarving design and production. Here you’ll find inspiration and ideas for your own signature designs composed using the beauty of natural wood. Choose from our unique selection of over 1200 decorative corbels, capitals, mouldings, corner posts, island posts, mantels, appliqués, rosettes, custom woodcarvings, and other decorative architectural components. Machining: We at Art For Everyday Inc., have mastered the integration of master hand carvers with CNC machining, to create

spectacular [email protected]

ASSOCIATED HARDWOODS, INC.Granite Falls, NCProducts: Blanks, S2S, S4S,custom pre-ripped dimension; full dimension, edge-glued panels; CNC machined components; panel products; drawer sides; mouldings; kiln dried lumber, export lumber. Machining: Floating arbor rip system, automated cross cut, high speed gluing, finish sanding, Fletcher sanding, CNC machining, CNC trim and bore, cold press, precision end trimming.828-396-3321rickj@associatedhardwoods.comassociatedhardwoods.com

BERTCH CABINET MANUFACTURING, INC.Waterloo, IAProducts: Cabinets, cabinet doors, cabinet parts. [email protected]

BHK OF AMERICASouth Boston, VAProducts: Drawers, wood components in vinyl, plywood, solid wood, FSC Certified wood products. [email protected]

BROWN WOOD, INC.Lincolnwood, ILProducts: Bendings, cabinet parts, drawer fronts & sides, drawer boxes, stiles & rails, cas-ket parts, chair parts & seats, blanks, dowels, edge-glued panels, butcher block, millwork,

mouldings, MDF mouldings, musical instrument parts, pins/plugs/knobs, plywood parts, bent plywood, particleboard parts, veneered parts, rounds, solid & laminated squares, hand rails, newel posts, table parts, table tops & bases, toy parts, turnings, kitchen island columns, bunn feet. HQ: Lincolnwood, IL; Plant: New Philadelphia, OH; Offices: Yarmouth, ME; Hutchinson, MN Machining: Assembly, boring, CNC boring, carving, CNC machining, embossing, finger jointing, finishing, mortising, routing, CNC routing, face & edge sanding, shaping, steam bending, tenoning, CNC turnings, lathe turn-ings, back knife turnings, variety/spool lathe [email protected] our ad page 17

CCF INDUSTRIESApollo, PAProducts: Dovetailed drawers (half blind), dowel and bore, FSC certified, specialty cutlery, spice/knife, double deck drawers, wine drawer, Humi-drawer, fixed, removable and/or adjustable dividers. Customized closet, kitchen/bath, office options. Machining: Dovetailing, dowel & bore, as-sembly, finishing, personalized laser engrav-ing, CNC [email protected] our ad page 2

COMPONENT SOLUTIONS, LLCMenominee, MIProducts: Custom hardwood dimension, window & door components, cut-to-size blanks, edge & face glued panels, butcher block tops,

edge banded plywood parts and custom lum-ber sorting. Species: Soft Maple & Hard Maple, Cherry, Walnut, Birch, Ash, Red Oak, Hickory, Alder, Elm. Specialty woods including Curly. Machining: Planing, ripping, chopping, gluing, sanding, trimming, boring, edge-banding, panel sawing, precision end trimming.906-863-2682kbunting@componentsoloutions.uscomponentsolutions.us

CONESTOGA WOOD SPECIALTIESEast Earl, PAProducts: Cabinet doors and drawer fronts of mortise, tenon and miter construction in cus-tom and contract quantities, dovetailed drawer boxes, beaded, inset & standard face frames, moldings, framed cabinet component kits, complementary decorative and architectural accessories, comprehensive finishing capabil-ity including paint, spray stains, wiping stains and glazes, dimensioned blanks of edge-glued or one-piece construction. Machining: Comprehensive machining capability to support a wide variety of rough mill, dimension operations, and finished sub-assemblies.717-445-6701pbeshears@conestogawood.comconestogawood.com

DANZER LUMBER NORTH AMERICA, INC.Bradford, PAProducts: Lineal mouldings, cut-to-size stiles & rails, door parts, face frame parts, edge-glued panels, drawer fronts, laminated squares, musi-cal instrument parts. Machining: Double end tenoning, moulding, shaping, profile [email protected]

APPALACHIAN HARDWOOD PRODUCTS

DECORATIVE WIRE GRILLE PROGRAM

CUSTOM & SPECIALTY DRAWER BOXES

5-Acre Mill says it helps bring the beauty out of wood. The company sus-tainably manufactures large and small component parts, combining technol-ogy with craftsmanship. 5-Acre offers a wide range of capabilities, including CNC machining, and can accommodate orders of thousands of parts per hour, to a few parts at a time. 419-542-9363, 5-acremill.com

Designs of Distinction by Brown Wood says its new cut-to-size decorative wire grille program is the only program of its kind on the market. Hand woven in eight styles and available in six finishes, designers and manufacturers can spec-ify the exact opening size of door panels and receive pre-cut, ready-to-install wire grille panels.888-213-8323, brownwoodinc.com

CCF Industries offers custom options on its dovetailed drawer boxes, including personalization with laser engraving. The dovetailed drawers are available in a wide selection of solid wood, baltic birch plywood, melamines and FSC/NAUF materials. The company says it offers quick pricing through its online ordering system800-581-3683, ccfdrawers.com

This source and supply directory provides information on the offerings and capabilities of dozens of wood component and dimension manufacturers.

WCMA Components Source Directory



DECORE-ATIVE SPECIALTIESMonrovia, CAProducts: Custom cabinet components; Cabi-net Doors (prefinished & unfinished), wood, plywood, veneer, RTF, melamine, laminate, aluminum; Drawer Boxes - wood, plywood, melamine, dovetail, dowelled; Cabinets - RTF frameless, RTA refacing; Cabinet Components - veneer sheets; Face Frames - wood; Mold-ings - wood, RTF, FSC materials; Prefinished-Doors, drawers, face frames, water based finishes; Accessories - corbels, onlays, legs, bun feet; Hardware - hinges, clips, guides. Machining: CNC Machining, sanding, [email protected]

DRAWER BOX SPECIALTIES/STATES INDUSTRIESOrange, CAProducts: Custom & specialty drawer boxes for any application, drawer organization inserts, kitchen trash, pantry pullouts, cabinet parts, stiles & rails, blanks, engineered wood parts, rounds, edge banding. Machining: English & French dovetailing, bor-ing, doweling, mitering, drawer parts, nailing, assembly, CNC boring, CNC Machining, face sanding, [email protected]

ELIAS WOODWORK & MFG. LTD.Winkler, MBProducts: Cabinet parts, butcher block, cut-to-size blanks, doors, drawer parts, E4E, edge glued panels, edge banding, lineal mouldings, millwork, mouldings, MDF mouldings, plywood parts, S2S, S4S, solid blanks, squares lami-nated, squares solid, turnings, veneered parts, laminated parts, acrylic parts, curved wood components, valances, corbels. Machining: Assembly full, assembly light, boring, carving, CNC machining, cut to length, finishing, gluing, mortising, moulding, routing, sanding, shaping, [email protected] our ad page 12

ELLIOTT WOODWORKINGPontiac, MIProducts: Dovetailed drawer boxes, butcher block, table tops, glued-up panels. Machining: CNC router248-821-3987mark@elliottwoodworking.comelliottwoodworking.com

FITTS INDUSTRIES, INC.Tuscaloosa, ALProducts: Hard & softwood stair components. balustrade, handrails, stair rail fittings, stair treads, turnings, mouldings, squares up to 6-1/2”, edge glued panels, finger joint blanks, wrought iron stair balustrade, stair installation hardware & accessories. Machining: CNC turning lathes, rotary knife lathes, backnife lathes, wide belt sanders, CNC routers, full rough [email protected]

FITZPATRICK & WELLER, INC.Ellicottville, NYProducts: Cabinet parts, chair parts, cut-to-size blanks, edge-glued panels, butcher block panels, millwork, mouldings, squares, stair-case parts, drawer parts, musical instrument parts, turnings, kiln dried hardwood lumber. Machining: Assembly, moulding, tenoning, CNC routing, boring, shaping, sanding, turn-ing, gluing, [email protected] [email protected]

FOREST PRODUCTS MFG. CO.Jasper, INProducts: Chair parts, cabinet parts, edge-glued panels, mouldings. Machining: Moulding, shaping, sanding, boring, [email protected]

GEORGE GUENZLER & SONS INC.Kitchener, ONProducts: Standard & custom stair & railing components, standard & custom table legs, custom components for the contract, healthcare, hospitality & institutional wood furniture industries, stool components, show wood, chair frames, jigsaw puzzle plywood, upholstery frames.

Machining: High & low production turning and sanding, CNC boring, routing, sawing, shaping, drilling, sanding, [email protected] our ad page 3

GERBER WOOD PRODUCTSKidron, OHProducts: Solid and finger jointed handrails, bending handrails, stair parts, treads & risers, S4S, blanks, edge-glued panels, trim, moldings, plywood parts, squares, and hotel furnishings. Also plaques, boxes, cutting boards, lids and other advertising specialty products and custom industrial parts. Machining: CNC routing of wood and metal, CNC beam saw panel ripping, large dimension face and edge laminating up to 26 feet long, gang ripping, resawing, custom finger jointing, molding, wide belt and profile sanding, laser engraving, heat shrink wrapping and custom [email protected]

GIGUÈRE & MORIN INC.St-Felix de Kingsey, QCProducts: Edge-glued panels, tables and components, furniture parts, dimension stock, cabinet door parts. Machining: CNC Machining, top and edge sanding, boring, [email protected]

INDIANA DIMENSION, INC.Logansport, INProducts: Cabinet parts, cabinet doors, mitered doors, drawer fronts & sides, stiles & rails, chair parts, lumber, blanks, edge-glued panels, flooring, millwork, moulding, squares, staircase parts. Machining: CNC, shaping, tenoning, mould-ing, sanding, [email protected]

KEIM LUMBER CO.Charm, OHProducts: FSC certified, cabinet parts, drawer sides, stiles & rails, chair parts, blanks, edge-glued panels, lumber, millwork, mouldings, curved & radius mouldings, curved doors, plywood parts, squares, staircase parts. Machining: CNC boring, CNC Machining, finger jointing, CNC routing, sanding, [email protected]

KENDRICK, INC. DBA/ KENDRICK FOREST PRODUCTSEdgewood, IAProducts: KD lumber, dimension, kitchen & bath cabinets. [email protected] our ad page 3

KEYSTONE WOOD SPECIALTIES INC.Lancaster, PAProducts: Custom cabinet components: cabinet doors, cabinet face frames, dovetailed and dowelled drawer boxes, moulding, wain-scoting, edge-banded panels and more. Machining: CNC machining, [email protected] our ad page 9

KRETZ LUMBER CO., INC.Antigo, WIProducts: Rip-to width, S4S, butcher block, custom sanding. Machining: Planing, ripping, sanding, and [email protected]

LEWIS LUMBER PRODUCTS, INC.Picture Rocks, PAProducts: Custom Architectural moulding profiles produced for on time delivery and first time quality. Complicated profiles, multiple profiles, unique species, FSC Certification is our

FURNITURE FRAMES & COMPONENTS

NORTH AMERICAN HARDWOODS

George Guenzler & Sons provides high-quality furniture components and sub-assemblies for the contract, institu-tional and healthcare furniture industries. The company says it uses the latest CNC technology combined with old-world craftsmanship and attention to detail to also produce turned and shaped wood components, with no minimum required.519-579-5080, guenzler.com

Kendrick Forest Products has been supplying North American hardwoods since 1983. Specializing in kiln-dried walnut, KFP also offers green and kiln dried lumber in most species, 4/4-8/4. KFP lumber inspectors have been certi-fied by the NHLA. Custom sawing is also available in certain species to target customer’s desired widths.563-928-6431, kfpiowa.com

SOLID COLOR RTF DOORS

Elias Woodwork offers cabinetry doors available in numerous thermofoil solid colors that can closely simulate painted wood doors. Thermofoil offers a scratch, stain, and fade resistant surface for long-lasting results, according to the company.800-665-0623, eliaswoodwork.com

Find products fastAvailable on WCMA.com, the inter-active Source Guide/Member Match Program can assist you in locating suppliers for the dimension and component products you need.


niche. Hardwood and softwood lumber. Rough mill capabilities. Machining: Scan optimize rip, S2S, rip 1 edge, precision optimized chopping, custom profile moulding, profile sanding, flat sanding, resawing, priming, and finish [email protected]

MACDONALD & OWEN LUMBER CO.Sparta, WIProducts: Certified wood components, cabinet parts, drawer sides, blanks, lumber, custom ripping and S4S. [email protected]

MENZNER LUMBER AND SUPPLY CO.Marathon, WIProducts: Hardwood moulding manufacturer. [email protected]

METRO HARDWOODSJackson, Chicago, Elkhart Products: Hardwood Lumber, High Pressure Laminate Panels, Hardwood Plywood, Melamine, Particleboard, Milesi and ML Campbell Wood Coatings, Formica Laminate, MDF, Barnwood Machining: Laminated High Pressure Panelsand [email protected] metrohardwoods.com

NORTHERN HARDWOODSSouth Range, MIProducts: 4/4 - 8/4 thicknesses in premium White Hard Maple, Red Leaf Soft Maple, Northern Red Oak, White Oak, Yellow Birch, White Birch, Cherry, White Ash, Aspen, Hickory, and Walnut. Moulder Blanks, Flooring Blanks, and width pulled lumber. Machining: Straight line ripping, gang ripping, chopping.715-533-6193rpeterson@northernhardwoods.comnorthernhardwoods.com

NORTHWEST HARDWOODSBeaverton, ORProducts: Hardwood lumber in all 14 major commercial US species; imported exotic lumber and decking; imported plywood from Asia, Russia and South America. 216-831-3140jacob.schriner@northwesthardwoods.comnorthwesthardwoods.com

OSBORNE WOOD PRODUCTS, INC.Toccoa, GAProducts: Founded in 1979, Osborne Wood Products, Inc. supplies the cabinet and furniture trade internationally with the highest quality decorative wood components. We also serve many avid hobbyists and Do-It-Yourselfers with unfinished wooden parts and furniture. Osborne Wood Products manufacturers and distributes island posts, table legs, corbels, moldings, cabinet and furniture feet, pilasters and onlays, chair legs, vanity legs, table slides, table aprons/bases, furniture kits, and other wood & metal decora-tive components. Osborne Wood Products also specializes in custom millwork services to meet each customer’s unique project needs. [email protected] our ad page 9

PALADIN IND., INC.Kentwood, MIProducts: PUR cleanroom lamination line for light-weight materials and high gloss acrylic and gloss/textured/matte finish laminates. AirTec edge banded doors, drawer fronts, and panel components, RTF Cabinet doors, chair parts, chair seats, particleboard parts, table tops, RTF tops, carved automobile shift knobs, laminated particleboard, MDF parts & case goods. Machining: Custom assembly, boring, CNC boring, 5 Axis CNC machining, routing, CNC routing, edge [email protected]

DOVETAIL DRAWER COLLECTION

100 DIFFERENT ISLAND LEG STYLES

Keystone Wood Specialties says its new Bee-Line dovetailed drawers offer quality and dependability, at a new price point. Available in 1-in. height increments, custom widths and depths, Bee-Line features pre-finished 5/8-in. thick solid maple drawer side material and can be delivered assembled or as finished RTA. Laser engraving and other options are available.800-233-0289, keystonewood.com

Osborne Wood Products offers 100 different styles of island legs in 19 dif-ferent wood types. From traditional to contemporary, dimensions range from 34.5 in. to 40.5 in. heights, and 3- to 8-in. side widths. The company also offers a wide range of furniture com-ponents, including acrylic and wood + metal feet and legs.800-849-8876, osbornewood.com



PENN WOOD PRODUCTS, INC.East Berlin, PAProducts: Prefinished mouldings, unfinished mouldings, stair treads & risers, lumber. Machining: Moulding, equalizing, end match-ing, finishing.717-259-9551 [email protected]

POLLMEIER, INCPortland, ORProducts: Pollmeier value added European Beech. The perfect hardwood for any ap-plication. Pollmeier is the largest producer of European Beech (fagus sylvatica), with 3 state of the art sawmills in Germany. We produce nearly 300 million board feet annually of KD lightly steamed Beech lumber in 3/4 through 12/4 thicknesses. Our value added proprietary grading system allows you to pick the right grade for the right application, increasing yield and throughput. European Beech also offers tremendous flexibility in finishing, excellent durability, and is one of the most sustainable species on the planet. We can offer fixed length on 1 inch increments, color sorted lumber, random width, sorted to width, and ripped to width lumber, that ultimately increases your profitability and bottom line. PEFC certified. Our new award winning BauBuche LVL (Laminated veneer lumber)

product can be used from structural beams to furniture, countertops, cabinets, and millwork applications. In BauBuche panel, the veneer layers are perpendicular to the surface. It can be used for table tops, sturdy work surfaces ceiling and wall cladding, stairs, and elegant wood flooring with the durability of an indus-trial floor. BauBuche panels can be machined as solid hardwood and are perfect for visible applications. The sanded surface is also ideal for further finishing. [email protected] our ad page 15

PREFERRED HARDWOODS, LLCRichfield, WIProducts: Preferred Hardwoods, LLC is a manufacturer of hardwood mouldings, S4S and component parts to the residential, commercial and store fixture market. [email protected]

RAINBOW PLAY SYSTEMSBrookings, SDProducts: We manufacture wooden play systems out of Redwood and Douglas Fir. We also do millwork, siding, and paneling. We have two System TM optimizing saw systems with automatic stackers, along with PF-90 and Weinig

S-75 cutoff saws. We have 8 Weinig moulders, and a wide assortment of boring machines and a KOMO CNC router. We have 5 double end tenonors for end matching. We have a Grecon-Dimter HS-120 finger joint machine and a wide assortment of rip saws, chop saws, etc. We have our own tool shop so we can make different profiles for the moulders on site. Mouldings; Lineal Mouldings; Lumber; Solid Blanks; S4S; Toy Parts; Millwork; Cut-to-size blanks; Flooring. Machining: Assembly, full; Tenoning; Cut to Length; Gluing; Finishing; Carving; Ripping; Routing; Boring; Finger jointing; Sanding; Moulding; CNC [email protected]

SEARS TROSTEL LUMBER CO.Ft. Collins, COProducts: Custom solid wood mouldings, S4S cabinet components, profiled cabinet components, stair treads, glued panels. Machining: Moulding, gang ripping, cut-to-length.970-482-0222steves@sears-trostel.comsears-trostel.com

SPARTA WOODWORKSSparta, TNProducts: Furniture components for chairs, tables, desks; mouldings, lumber, specialty products, musical instrument components. Machining: Assembling, boring, finishing, mortising, moulding, routing, sanding, shap-ing, tenoning, CNC machining.931-738-1896jaydee@spartawoodworks.comspartawoodworks.com

SUMMIT VALLEY WOOD PRODUCTSApple Creek, OHProducts: Wooden table slides, upholstered furniture framing Machining: Planing and moulding.330-698-0186

THOS. MOSERAuburn, MEProducts: Contract and residential furniture,

edge glued panels, squares and components. Machining: Cross cutting, ripping, CNC component [email protected]

TIGERTON LUMBER CO.Tigerton, WIProducts: Blanks, lumber. [email protected]

TILO INDUSTRIESLewisburg, PAProducts: Cabinet parts, drawer sides, stiles & rails, casket parts, chair parts, blanks, dowels, edge-glued panels, millwork, lineal mouldings, mouldings, rounds, solid & lami-nated squares, extra large laminated squares, hand rails, table tops. Machining: CNC machining, moulding [email protected]

VALLEY CUSTOM DOORDePere, WIProducts: Cabinet doors, MDF doors, cabinet parts, drawer fronts & sides, drawer boxes, stiles & rails, blanks, edge-glued panels, mill-work, mouldings, wainscoting, wall paneling. Machining: Assembly, CNC machining, finish-ing, routing, face & edge sanding, shaping, tenoning.888-815-9648cguerts@valleycustomdoor.comvalleycustomdoor.comSee our ad page 11

WAGNER HARDWOODS, LLCOwego, NYProducts: Width selected Kiln dried lumber: 4/4, 5/4, 6/4, 8/4,7/4, 10/4, 12/4, 16/4. [email protected]

LAMINATED VENEER LUMBER

Pollmeier offers BauBuche, a laminated veneer lumber from beech and used for structural applications including: table-tops, work surfaces, ceiling and wall cladding, stairs, and elegant wood floor-ing. BauBuche panels can be machined as solid hardwood and are perfect for visible applications, the company adds. The sanded surface is also ideal for further finishing.866-432-0699, pollmeier.com

TFL DOORS & DRAWER FRONTS

Valley Custom Door says its new ther-mally fused laminate (TFL) doors and drawer fronts are versatile and provide a contemporary appearance. They are available as three different styles, in six different colors. The company says lami-nate pieces, full sheets, pre-cut stock, L-moulding, and edge banding rolls can also be ordered.888-815-9648, valleycustomdoor.com


WALNUT CREEK PLANINGMillersburg, OHProducts: Chair seats & parts, S2S, S4S, E4E blanks, finger jointed products, panels, butcher block panels, cutting boards, dowels, squares, stair treads, risers, hand rails, newel posts. Machining: Finger jointing, tenoning, mould-ing, gluing, [email protected]

WDI CO.Forest Lake, MNProducts: Bendings, cabinet doors & parts, drawer fronts & sides, drawer boxes, wood boxes, stiles & rails, wood blanks, edge-glued panels, butcher block, millwork, mouldings, mu-sical instrument parts, engineered wood parts, rounds, solid & laminated squares, stair parts, hand rails, newel posts, tablestops, toy parts. Machining: Assembly, CNC machining, finishing, routing, CNC routing, face & edge sanding, [email protected]

WOOD COMPONENT MANUFACTURERS ASSN.Lindstrom, [email protected] wcma.com

WOODENWARE USA, INC.Etna Green, INProducts: Cabinet doors and drawer fronts. [email protected]

YODER LUMBER CO., INC.Millersburg, OHProducts: Moulder blanks, edge-glued panels, solid & laminated squares, machined & semi-machined components, moulded parts, S4S hardwoods, custom moulding, stair treads & risers. Machining: Ripping, chopping, surfacing, sanding, CNC routering, finger jointing, mould-

ing, edge and face [email protected] our ad page 6

YOUNG MFG. CO.Beaver Dam, KYProducts: Stair treads, risers & related components, exterior wood & clad frames, exterior door sills. 270-274-3306kim.oliver@youngmanufacturing.comyoungmanufacturing.com

ZAMMA CORPORATIONOrange, VAProducts: Solid wood, laminate, and PVC floor transition profiles, furniture components, decorative laminate production, store fixture profiles. Machining: Moulding and profile wrapping, cut-to-size, edge banding, slitting, paper [email protected]

ZELAZOSKI WOOD PRODUCTS, INC.Antigo, WIProducts: Mouldings, flat work, turnings, made to order items. Machining: Assembly, boring, shaping, CNC routing, finishing, CNC lathe, laser engraving, pad printing, [email protected] our ad page 16

More at WCMA.comVisit the revamped website of the

Wood Component Manufacturers As-sociation for information on member products, tech partners, networking

opportunities and more.

WOOD BLOCKS & COMPONENTS

APPALACHIAN HARDWOOD COMPONENTS

Zelazoski Wood Products has been manufacturing custom wood compo-nents for more than 90 years, including blocks, glued and assembled panel products, mouldings, turnings, sporting goods such as game calls and fish-ing lures, as well as specialty items. Imprinted products are also offered. A variety of species are available.800- 240- 0974, zwpi.com

From glued panels and stair treads to custom mouldings and furniture compo-nents, Yoder Lumber says it is a com-plete source for high-quality Appalachian hardwood products. Its manufacturing processes are designed to minimize waste while providing consistent quality, Yoder adds. The logistics division offers reliable just-in-time delivery for every order, regardless of size.330-893-3121, yoderlumber.com

10 reasons to outsource dimension & wood components from WCMA member companies1. Outsourced components can cost less than producing in-house.

2. You do not have to have the manufacturing capabilities or space in your own shop.

3. It allows you to take advantage of other producers’ expertise in design and manufacturing.

4. It can increase your productivity and efficiency in other areas.

5. It saves you time, allowing you to focus on more important things.

6. Outsourcing can reduce your capital expenditures.

7. Oftentimes it enables you to obtain better product quality and consistency.

8. It allows you to reduce your inventory and overhead.

9. Outsourcing allows you to concentrate on your own product development.

10. It enables you to offer an expanded variety of products to customers.


buyer’s guide - wcma...36th edition buyer’s guide wood component manufacturers association...

Documents