build-your-own g2 series meter - schibuola.com gpi... · ss ind. grade: s05 (1/2 in.) tri-clover...

�� 2/04 ML-1800-2

Build-Your-Own G2 Series Meter

��

Aluminum: A05 (1/2 in.)Brass: B05 (1/2 in.)

Ind. Grade HP: H05 (1/2 in.)SS Ind. Grade: S05 (1/2 in.)Tri-Clover®: S05T (1/2 in.)

1) Select Your Turbine Material and Size

2) Select Your Electronic Choice(For further details see page 46)

CALIBRATE

DISPLAY

NON-COMMERCIAL

MODEL

GREAT PLAINS INDUSTRIES, INC.WICHITA, KANSAS

Electronic Digital Meter

09 Computer XX No Computer

Aluminum: A07 (3/4 in.)Brass: B07 (3/4 in.)

Ind. Grade HP: H07 (3/4 in.)SS Ind. Grade: S07 (3/4 in.)Tri-Clover®: S07T (3/4 in.)

Aluminum: A10 (1 in.)Brass: B10 (1 in.)

Ind. Grade HP: H10 (1 in.)SS Ind. Grade: S10 (1 in.)Tri-Clover®: S10T (1 in.)

Aluminum: A15 (1-1/2 in.)Brass: B15 (1-1/2 in.)

Ind. Grade HP: H15 (1-1/2 in.)SS Ind. Grade: S15 (1-1/2 in.)Tri-Clover®: S15T (1-1/2 in.)

Aluminum: A20 (2 in.)Brass: B20 (2 in.)

Ind. Grade HP: H20 (2 in.)SS Ind. Grade: S20 (2 in.)Tri-Clover®: S20T (2 in.)

Ind. Grade PVC: C05 (1/2 in.)Ind. Grade PVDF: P05 (1/2 in.)

Ind. Grade PVC: C10 (1 in.)Ind. Grade PVDF: P10 (1 in.)

Ind. Grade 150 lb. ANSI Flange:S10F (1 in.)

Ind. Grade 150 lb. ANSI Flange:S15F (1-1/2 in.)

Ind. Grade 150 lb. ANSI Flange:S20F (2 in.)

The unique modular approach of the Industrial Grade Meter line allows you to design ameter to match your specific application. The following chart illustrates the variety ofmaterials, sizes, special fittings and electronics choices available. Technical Specificationson Industrial Grade Meters are included in this section. Remote Transmitters for theIndustrial Grade Meter Line are covered in Section 6.

3) Select Your Sensor

DigitalOpen Collector Sensor

Features magnetic pickup withopen collector output.

DigitalOpen Collector Sensor

for Local DisplayUses the turbine-mounted

computer’s magnetic pickup foropen-collector output.

AnalogSine Wave Sensor

Features magnetic pickup withlow-level sine wave output.

��ML-1800-2 2/04

��

Build-Your-Own G2 Series Meter

��

Remote Pulse OutTransmitter With

Display

Remote 4-20 mATransmitter With

Display

Remote 4-20 mATransmitter Without

Display

Remote Pulse OutTransmitter Without

Display

Pulse Access Module(Digital Open Collector

Signal)Part # 125060-1

This module provides anunscaled, digital signal fromyour GPI meter by accessingcircuitry from the on-boardcomputer readout. Power is0 to 60 VDC. OperationalTemperature is +14°F -+140°F (-10°C - +160°C)

(Requires 09 Computer)

External Power Module(Power Option for thePulse Access Module)

Part # 125070-1

This module provides anexternal power option for the09 Computer or the PulseAccess Module. Internal bat-teries can be used as an aux-iliary power source. Power is7 to 30 VDC @ 1 mA. Opera-tional Temperature is +14°F -+140°F (-10°C - +60°C)

(Requires 09 Computer &Pulse Access Module)

4-20 mA Module(4-20 mA or 0-5 volt

Analog Signal)Part # 125100-1

This module provides acurrent signal from your GPImeter by accessing circuitryfrom the on-board computerreadout. The 4-20 mA Moduleis loop powered, 7 to 30 VDC.Operational Temperature is0°F - +150°F (-17°C - +65°C).


5) Select Your Transmitter(For further details see page 48)

4) Select Your Module

FM Approved Remote Kit(Low Level Sine Wave)

Part # 113275-1

This assembly module allowsremote mounting of thecomputer electronics forspecialized situations such asremote readings or high andlow fluid temperature appli-cations while maintaining theFactory Mutual Approval andself-powered design. Opera-tional Temperature is -40°F -+250°F (-40°C - +121°C) formetal meters.


Conditioned Signal Module(Open Collector or 6 volt

Square Wave Signal)Part # 113435-1

This module provides anunscaled, amplified, digitalsignal from a GPI turbinehousing. This module’s digitaloutput eliminates the need foraddition signal conditioningequipment. Externally power-ed, 9 to 35 VDC. OperationalTemperature is -40°F - +212°F(-40°C - +100°C).

(No Computer Required)

Standard Remote Kit(Low Level Sine Wave)

Part # 113265-1

This module allows remotemounting of the computerelectronics for specializedsituations such as remotereadings or high and low fluidtemperature applications.Operational Temperature is-40°F - +250°F (-40°C -+121°C) for metal meters.


FM Approved Sensor Kit(Open Collector, NPN)

Part # 120077-01

The FM Approved Sensor isdesigned for use with any G2Turbine Meter when rotorpulse data is required and themeter is located within ahazardous location. It is idealfor indoor or outdoor appli-cations, and the output signalis compatible with existingGPI remote electronics.

(No Computer Required)

�� 2/04 ML-1800-2

G2 Meter Numbering System

��

G2 = Industrial Grade Meter

Product Identifier

A05 = Aluminum – 1/2 in.A07 = Aluminum – 3/4 in.A10 = Aluminum – 1 in.A15 = Aluminum – 1-1/2 in.A20 = Aluminum – 2 in.B05 = Brass – 1/2 in.B07 = Brass – 3/4 in.B10 = Brass – 1 in.B15 = Brass – 1-1/2 in.B20 = Brass – 2 in.

Turbine Material & Size

F = 150 lb. ANSI Flange - available on S10, S15 and S20 onlyI = ISO (Female)N = NPT (Female)T = Tri-Clover® Fitting - available on S05 - S20 onlyW = Solvent Weld - available on PVC onlyXX = No Electronics - Turbine Only

Fitting Type

Turbine with Local Display09 = 2 Totals (1 Resettable, 1 Cumulative), Factory Calibration in Gallons and Litres,

2 User Calibrations and FlowrateTurbine with Local Display and Remote Transmitter Without Display13 = Remote Transmittter (Pulse Out & Turbine Mounted Display with Open Collector

Sensor)23 = Remote Transmitter (4-20 mA & Turbine Mounted Display with Open Collector Sensor)Turbine with Local Display and Remote Transmitter Includes Display33 = Remote Transmittter (Pulse Out with Display & Turbine Mounted Display with Open

Collector Sensor)43 = Remote Transmitter (4-20 mA with Display & Turbine Mounted Display with Open

Collector Sensor)Turbine & Remote Transmitter (No Display on Turbine or Remote Transmitter)11 = Remote Transmittter (Pulse Out with Sine Wave Sensor)21 = Remote 4-20 mA Transmittter (With Sine Wave Sensor)22 = Remote 4-20 mA Transmittter (With Open Collector Sensor)Turbine & Remote Transmitter (No Display on Turbine, Remote Transmitter w/Display)31 = Remote Pulse Out Transmittter (With Display & Sine Wave Sensor)32 = Remote Pulse Out Transmittter (With Display & Open Collector Sensor)41 = Remote 4-20 mA Transmittter (With Display & Sine Wave Sensor)42 = Remote 4-20 mA Transmittter (With Display & Open Collector Sensor)Turbine OnlyXX = No Electronics – Turbine Only

Electronic Choice

GM = Gallons / MinuteLM = Litres / MinuteXX = No Computer

Calibration

A = Use for Turbine Only or Turbine w/Display (Sizes 05-10)B = Use for Turbine Only or Turbine w/Display (Sizes 15-20)C = Use for Turbine with Remote Transmitter With or Without

Turbine Mounted Display (Sizes 05-20)D = Use for 150 lb. ANSI Flange Turbine Only (Size 10)E = Use for 150 lb. ANSI Flange Turbine with Remote

Transmitter (Sizes 10, 15 or 20)

Packaging

G2 S07 N 09 GM A (Sample Model Number)

➤ ➤ ➤ ➤ ➤ ➤

➤

Metal Meters:S05 = Stainless Steel – 1/2 in.S07 = Stainless Steel – 3/4 in.S10 = Stainless Steel – 1 in.S15 = Stainless Steel – 1-1/2 in.S20 = Stainless Steel – 2 in.H05 = Stainless Steel High Pressure – 1/2 in.H07 = Stainless Steel High Pressure – 3/4 in.H10 = Stainless Steel High Pressure – 1 in.H15 = Stainless Steel High Pressure – 1-1/2 in.H20 = Stainless Steel High Pressure – 2 in.

Plastic Meters:C05 = PVC – 1/2 in.C10 = PVC – 1 in.P05 = PVDF – 1/2 in.P10 = PVDF – 1 in.

+ + + + +

Meter Dimensionslisted on page 52.

��ML-1800-2 2/04

��

STAINLESS STEEL - SPECIFICATIONS

ELECTRONIC CHOICES

Local Display: See Section 6 in back of catalog.

Remote Display Options: See Section 6 in back of catalog.

Remote Transmitter Options: See Section 6 in back of catalog.

Fitting Type: NPT or ISO (Female)

Housing Material: 316 Stainless Steel

Fitting Sizes Available: 1/2” 3/4” 1” 1-1/2” 2”

Flow Range: 1/2” (S05) 1 - 10 GPM (3.8 - 37.9 LPM)3/4” (S07) 2 - 20 GPM (7.6 - 75.7 LPM)1” (S10) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (S15) 10 - 100 GPM (38.0 - 380 LPM)2” (S20) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1/2” (S05) ± 2.0% of reading3/4” (S07) ± 1.5% of reading1” (S10) ± 1.5% of reading1-1/2” (S15) ± 1.0% of reading2” (S20) ± 1.0% of reading

Repeatability: ± 0.1%

Pressure Rating: 1,500 PSI / 103 BAR

Operating Temperature Range: -40°F to +250°F (-40°C to +121°C)

Typical K-Factor: 1/2” (S05) 2,5003/4” (S07) 1,1001” (S10) 5651-1/2” (S15) 2152” (S20) 100

Wetted Materials: Housing: 316 Stainless SteelBearings: CeramicShaft: Tungsten CarbideRotor: PVDFRings: 316 Stainless Steel

Frequency Range: 1/2” (S05) 42 - 420 Hz @ 1 - 10 GPM3/4” (S07) 37 - 370 Hz @ 2 - 20 GPM1” (S10) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (S15) 36 - 360 Hz @ 10 - 100 GPM2” (S20) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1/2” (S05) 55 mesh3/4” (S07) 55 mesh1” (S10) 28 mesh1-1/2” (S15) 55 mesh2” (S20) 28 mesh

Maximum Flow: 1/2” (S05) 15 GPM (56.8 LPM)3/4” (S07) 30 GPM (113.6 LPM)1” (S10) 75 GPM (284 LPM)1-1/2” (S15) 150 GPM (568 LPM)2” (S20) 300 GPM (1,136 LPM)

Wrench Flat Size: 1/2” (S05) 1-1/16 inch (27 mm)3/4” (S07) 1-5/16 inch (33 mm)1” (S10) 1-5/8 inch (41 mm)1-1/2” (S15) 2-3/8 inch (60 mm)2” (S20) 3 inch (75 mm)

Shipping Weight: 1/2” (S05) 2.2 lbs./1.0 kg - Turbine Only: 2.0 lbs./1.0 kg3/4” (S07) 2.4 lbs./1.1 kg - Turbine Only: 2.2 lbs./1.0 kg1” (S10) 2.8 lbs./1.3 kg - Turbine Only: 2.6 lbs./1.2 kg1-1/2” (S15) 4.6 lbs./2.1 kg - Turbine Only: 4.4 lbs./2.0 kg2” (S20) 7.0 lbs./3.2 kg - Turbine Only: 6.7 lbs./3.1 kg

The GPI Stainless Steel Meter line hasa proven track record in the industrialmarket. GPI Stainless Steel Meters arerugged and dependable. Use stainlesssteel meters for most chemicals:Ammonium, Plating Solutions and Fuelproducts.

Features and Benefits:

�� Stainless steel meters have excellent chemicalcompatibility.

�� Modular design allows for use with OutputModules, Sensors and Remote Transmitters.

�� Local Display Computer features: 2 Totals(1 Resettable, 1 Cumulative); Factory Calibra-tion in gallons and litres; 2 User Calibrationsand Flowrate.

�� High accuracy meter.

�� Internal parts are simple to replace for easymaintenance.

�� Powered by Lithium batteries for approximately9,000 hours.

�� Accessories easily upgrade meter.

Select Your Fitting Size:1/2 inch 3/4 inch 1 inch 1-1/2 inch 2 inch

G2 Industrial Meters - Stainless Steel

��ATEX

�� 2/04 ML-1800-2

HIGH PRESSURE - SPECIFICATIONSFitting Type: NPT or ISO (Female)



Flow Range: 1/2” (H05) 1 - 10 GPM (3.8 - 37.9 LPM)3/4” (H07) 2 - 20 GPM (7.6 - 75.7 LPM)1” (H10) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (H15) 10 - 100 GPM (38.0 - 380 LPM)2” (H20) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1/2” (H05) ± 2.0% of reading3/4” (H07) ± 1.5% of reading1” (H10) ± 1.5% of reading1-1/2” (H15) ± 1.0% of reading2” (H20) ± 1.0% of reading


Pressure Rating: 3,000 PSI / 207 BAR


Typical K-Factor: 1/2” (H05) 2,5003/4” (H07) 1,1001” (H10) 5651-1/2” (H15) 2152” (H20) 100


Frequency Range: 1/2” (H05) 42 - 420 Hz @ 1 - 10 GPM3/4” (H07) 37 - 370 Hz @ 2 - 20 GPM1” (H10) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (H15) 36 - 360 Hz @ 10 - 100 GPM2” (H20) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1/2” (H05) 55 mesh3/4” (H07) 55 mesh1” (H10) 28 mesh1-1/2” (H15) 55 mesh2” (H20) 28 mesh

Maximum Flow: 1/2” (H05) 15 GPM (56.8 LPM)3/4” (H07) 30 GPM (113.6 LPM)1” (H10) 75 GPM (284 LPM)1-1/2” (H15) 150 GPM (568 LPM)2” (H20) 300 GPM (1,136 LPM)

Wrench Flat Size: 1/2” (H05) 1-1/16 inch (27 mm)3/4” (H07) 1-5/16 inch (33 mm)1” (H10) 1-5/8 inch (41 mm)1-1/2” (H15) 2-3/8 inch (60 mm)2” (H20) 3 inch (75 mm)

Shipping Weight: 1/2” (H05) 2.2 lbs./1.0 kg - Turbine Only: 2.0 lbs./1.0 kg3/4” (H07) 2.4 lbs./1.1 kg - Turbine Only: 2.2 lbs./1.0 kg1” (H10) 2.8 lbs./1.3 kg - Turbine Only: 2.6 lbs./1.2 kg1-1/2” (H15) 4.6 lbs./2.1 kg - Turbine Only: 4.4 lbs./2.0 kg2” (H20) 7.0 lbs./3.2 kg - Turbine Only: 6.7 lbs./3.1 kg

ELECTRONIC CHOICESLocal Display: See Section 6 in back of catalog.



This is the turbine meter of choice forhigh pressure applications like spraywashers. PSIG for the GPI High PressureMeter is 3,000 compared to 1,500 for thenormal stainless steel meter. This provenmeter can perform in all kinds of highpressure applications.


�� High pressure and high accuracy.

�� Excellent chemical compatibility.






G2 Industrial Meters - High Pressure

��

��ML-1800-2 2/04

��

ANSI FLANGE - SPECIFICATIONS




Fitting Type: 150 lb. ANSI Flange


Fitting Sizes Available: 1” 1-1/2” 2”

Flow Range: 1” (S10F) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (S15F) 10 - 100 GPM (38.0 - 380 LPM)2” (S20F) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1” (S10F) ± 1.5% of reading1-1/2” (S15F) ± 1.0% of reading2” (S20F) ± 1.0% of reading


Pressure Rating: 285 PSI / 19.3 BAR


Typical K-Factor: 1” (S10F) 5651-1/2” (S15F) 2152” (S20F) 100


Frequency Range: 1” (S10F) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (S15F) 36 - 360 Hz @ 10 - 100 GPM2” (S20F) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1” (S10F) 28 mesh1-1/2” (S15F) 55 mesh2” (S20F) 28 mesh

Maximum Flow: 1” (S10F) 75 GPM (284 LPM)1-1/2” (S15F) 150 GPM (568 LPM)2” (S20F) 300 GPM (1,136 LPM)

Shipping Weight: 1” (S10F) 7.2 lbs./3.3 kg - Turbine Only: 7.0 lbs./3.2 kg1-1/2” (S15F) 11.3 lbs./5.1 kg - Turbine Only: 11.1 lbs./5.0 kg2” (S20F) 18.6 lbs./8.4 kg - Turbine Only: 18.4 lbs./8.3 kg

Select stainless steel meters with 150 lb.ANSI Flanges when you need a meterthat installs in-line quickly. FlangeMeters are easily installed and removedwith four bolts. Combine with GPI’sComputer Electronics for a complete,accurate, metering system.


�� Stainless steel meters have excellent chemicalcompatibility.



�� Precision accuracy meter.




Select Your Fitting Size:1 inch 1-1/2 inch 2 inch

G2 Industrial Meters - ANSI Flange

��ATEX

�� 2/04 ML-1800-2

TRI-CLOVER® - SPECIFICATIONS

ELECTRONIC CHOICES




Fitting Type: Tri-Clover®



Tri-Clover® Fittings Available: 3/4” 1” 1-1/2” 2” 2-1/2”

Flow Range: 1/2” (S05T) 1 - 10 GPM (3.8 - 37.9 LPM)3/4” (S07T) 2 - 20 GPM (7.6 - 75.7 LPM)1” (S10T) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (S15T) 10 - 100 GPM (38.0 - 380 LPM)2” (S20T) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1/2” (S05T) ± 2.0% of reading3/4” (S07T) ± 1.5% of reading1” (S10T) ± 1.5% of reading1-1/2” (S15T) ± 1.0% of reading2” (S20T) ± 1.0% of reading


Pressure Rating: 450 PSI / 31 BAR


Typical K-Factor: 1/2” (S05T) 2,5003/4” (S07T) 1,1001” (S10T) 5651-1/2” (S15T) 2152” (S20T) 100


Frequency Range: 1/2” (S05T) 42 - 420 Hz @ 1 - 10 GPM3/4” (S07) 37 - 370 Hz @ 2 - 20 GPM1” (S10T) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (S15T) 36 - 360 Hz @ 10 - 100 GPM2” (S20T) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1/2” (S05T) 55 mesh3/4” (S07T) 55 mesh1” (S10T) 28 mesh1-1/2” (S15T) 55 mesh2” (S20T) 28 mesh

Maximum Flow: 1/2” (S05T) 15 GPM (56.8 LPM)3/4” (S07T) 30 GPM (113.6 LPM)1” (S10T) 75 GPM (284 LPM)1-1/2” (S15T) 150 GPM (568 LPM)2” (S20T) 300 GPM (1,136 LPM)

Shipping Weight: 1/2” (S05T) 2.5 lbs./1.0 kg - Turbine Only: 2.3 lbs./1.0 kg3/4” (S07T) 2.9 lbs./1.3 kg - Turbine Only: 2.7 lbs./1.2 kg1” (S10T) 3.2 lbs./1.4 kg - Turbine Only: 3.0 lbs./1.3 kg1-1/2” (S15T) 4.7 lbs./2.1 kg - Turbine Only: 4.5 lbs./2.0 kg2” (S20T) 6.5 lbs./2.9 kg - Turbine Only: 6.3 lbs./2.8 kg

The GPI Stainless Steel Meters withTri-Clover® fittings can be used withfood, beverage and pharmaceuticalindustries in pre-process applications.Built of stainless steel construction,these meters come in five sizes to fitmost every application.


�� Stainless steel meter with Tri-Clover® fittings.



�� Fitting sizes include: 3/4”, 1”, 1-1/2”, 2”and 2-1/2”.

�� Internal parts are easy to replace.




G2 Industrial Meters - Tri-Clover®

��ATEX

��ML-1800-2 2/04

��

ALUMINUM - SPECIFICATIONSFitting Type: NPT or ISO (Female)

Housing Material: Aluminum


Flow Range: 1/2” (A05) 1 - 10 GPM (3.8 - 37.9 LPM)3/4” (A07) 2 - 20 GPM (7.6 - 75.7 LPM)1” (A10) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (A15) 10 - 100 GPM (38.0 - 380 LPM)2” (A20) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1/2” (A05) ± 2.0% of reading3/4” (A07) ± 1.5% of reading1” (A10) ± 1.5% of reading1-1/2” (A15) ± 1.0% of reading2” (A20) ± 1.0% of reading




Typical K-Factor: 1/2” (A05) 2,5003/4” (A07) 1,1001” (A10) 5651-1/2” (A15) 2152” (A20) 100

Wetted Materials: Housing: AluminumBearings: CeramicShaft: Tungsten CarbideRotor: PVDFRings: 316 Stainless Steel

Frequency Range: 1/2” (A05) 42 - 420 Hz @ 1 - 10 GPM3/4” (A07) 37 - 370 Hz @ 2 - 20 GPM1” (A10) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (A15) 36 - 360 Hz @ 10 - 100 GPM2” (A20) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1/2” (A05) 55 mesh3/4” (A07) 55 mesh1” (A10) 28 mesh1-1/2” (A15) 55 mesh2” (A20) 28 mesh

Maximum Flow: 1/2” (A05) 15 GPM (56.8 LPM)3/4” (A07) 30 GPM (113.6 LPM)1” (A10) 75 GPM (284 LPM)1-1/2” (A15) 150 GPM (568 LPM)2” (A20) 300 GPM (1,136 LPM)

Wrench Flat Size: 1/2” (A05) 1-1/16 inch (27 mm)3/4” (A07) 1-5/16 inch (33 mm)1” (A10) 1-5/8 inch (41 mm)1-1/2” (A15) 2-3/8 inch (60 mm)2” (A20) 3 inch (75 mm)

Shipping Weight: 1/2” (A05) 1.2 lbs./.54 kg - Turbine Only: 1.0 lbs./.45 kg3/4” (A07) 2.4 lbs./1.1 kg - Turbine Only: 2.2 lbs./1.0 kg1” (A10) 2.8 lbs./1.3 kg - Turbine Only: 2.6 lbs./1.2 kg1-1/2” (A15) 4.6 lbs./2.1 kg - Turbine Only: 4.4 lbs./2.0 kg2” (A20) 7.0 lbs./3.2 kg - Turbine Only: 6.7 lbs./3.1 kg

ELECTRONIC CHOICES




GPI offers a full line of Industrial Meters ina variety of housing materials. Aluminummeters are best suited for petroleumbased products. The modular designallows for maximum flexibility in meetingcustom applications. Models are availablewith ISO or NPT fittings.


�� High precision, durable and compact turbineflowmeters.




�� Lightweight, compact design allows for easyinstallation.

�� Powered by Lithium batteries for approxi-mately 9,000 hours.


��

G2 Industrial Meters - Aluminum

ATEX

�� 2/04 ML-1800-2

BRASS - SPECIFICATIONSFitting Type: NPT or ISO (Female)

Housing Material: Brass


Flow Range: 1/2” (B05) 1 - 10 GPM (3.8 - 37.9 LPM)3/4” (B07) 2 - 20 GPM (7.6 - 75.7 LPM)1” (B10) 5 - 50 GPM (18.9 - 190 LPM)1-1/2” (B15) 10 - 100 GPM (38.0 - 380 LPM)2” (B20) 20 - 200 GPM (76 - 760 LPM)

Accuracy: 1/2” (B05) ± 2.0% of reading3/4” (B07) ± 1.5% of reading1” (B10) ± 1.5% of reading1-1/2” (B15) ± 1.0% of reading2” (B20) ± 1.0% of reading




Typical K-Factor: 1/2” (B05) 2,5003/4” (B07) 1,1001” (B10) 5651-1/2” (B15) 2152” (B20) 100

Wetted Materials: Housing: BrassBearings: CeramicShaft: Tungsten CarbideRotor: PVDFRings: 316 Stainless Steel

Frequency Range: 1/2” (B05) 42 - 420 Hz @ 1 - 10 GPM3/4” (B07) 37 - 370 Hz @ 2 - 20 GPM1” (B10) 47 - 470 Hz @ 5 - 50 GPM1-1/2” (B15) 36 - 360 Hz @ 10 - 100 GPM2” (B20) 33 - 330 Hz @ 20 - 200 GPM

Strainer Size: 1/2” (B05) 55 mesh3/4” (B07) 55 mesh1” (B10) 28 mesh1-1/2” (B15) 55 mesh2” (B20) 28 mesh

Maximum Flow: 1/2” (B05) 15 GPM (56.8 LPM)3/4” (B07) 30 GPM (113.6 LPM)1” (B10) 75 GPM (284 LPM)1-1/2” (B15) 150 GPM (568 LPM)2” (B20) 300 GPM (1,136 LPM)

Wrench Flat Size: 1/2” (B05) 1-1/16 inch (27 mm)3/4” (B07) 1-5/16 inch (33 mm)1” (B10) 1-5/8 inch (41 mm)1-1/2” (B15) 2-3/8 inch (60 mm)2” (B20) 3 inch (75 mm)

Shipping Weight: 1/2” (B05) 2.82 lbs./1.28 kg - Turbine Only: 2.62 lbs./1.19 kg3/4” (B07) 3.14 lbs./1.42 kg - Turbine Only: 2.94 lbs./1.33 kg1” (B10) 3.75 lbs./1.7 kg - Turbine Only: 3.55 lbs./1.6 kg1-1/2” (B15) 6.87 lbs./3.1 kg - Turbine Only: 6.67 lbs./3.0 kg2” (B20) 10.46 lbs./4.7 kg - Turbine Only: 10.26 lbs./4.6 kg

ELECTRONIC CHOICES




The G2 Industrial Brass Meter allowsanother choice for fluid compatibility.The GPI Brass Meter works well withmost water applications. Use withglucose, lacquer thinners and vegetablejuices for example.


�� High precision and durable turbineflowmeters.






G2 Industrial Meters - Brass

��ATEX

��ML-1800-2 2/04

��

PVC - SPECIFICATIONSFitting Type: NPT or Solvent Weld (Female)

Housing Material: PVC

Fitting Sizes Available: 1/2” and 1”

Flow Range: 1/2” (C05) 1.2 - 12 GPM (4.54 - 45.42 LPM)1” (C10) 5 - 50 GPM (18.9 - 190 LPM)

Accuracy: 1/2” (C05) ± 2.0% of reading1” (C10) ± 1.5% of reading



Operating Temperature Range: +32°F to +140°F (0°C to +60°C)

Maximum Storage Temperature: -40°F to +158°F (-40°C to +70°C)

Typical K-Factor: 1/2” (C05) 2,4001” (C10) 540

Wetted Materials: Housing: PVCBearings: CeramicShaft: CeramicRotor: PVDFRings: Viton

Frequency Range: 1/2” (C05) 48 - 480 Hz @ 1.2 - 12 GPM1” (C10) 45 - 450 Hz @ 5 - 50 GPM

Strainer Size: 1/2” (C05) 55 mesh1” (C10) 28 mesh

Maximum Flow: 1/2” (C05) 15 GPM (56.8 LPM)1” (C10) 75 GPM (284 LPM)

Shipping Weight: 1/2” (C05) 1.3 lbs./0.6 kg - Turbine Only: 1.1 lbs./.51 kg1” (C10) 1.9 lbs./0.8 kg - Turbine Only: 1.7 lbs./.77 kg




Designed specifically for use with water,this meter is an economical alternative tostainless steel meters. The PVC Meter isdurable, lightweight and easy-to-installin-line. Use this meter with water and mildchemicals such as alcohol or beer.


�� PVC meters are economical, durable andlightweight.

�� Available with Local Display or RemoteTransmitter.



�� One field replaceable internal part makesmaintenance easy.

Select Your Fitting Size:1/2 inch 1 inch

G2 Industrial Meters - PVC

��

�� 2/04 ML-1800-2

��

PVDF - SPECIFICATIONSFitting Type: NPT or ISO (Female)

Housing Material: PVDF

Fitting Sizes Available: 1/2” 1”

Flow Range: 1/2” (P05) 1.2 - 12 GPM (4.54 - 45.42 LPM)1” (P10) 5 - 50 GPM (18.9 - 190 LPM)

Accuracy: 1/2” (P05) ± 2.0% of reading1” (P10) ± 1.5% of reading




Maximum Storage Temperature: -40°F to +250°F (-40°C to +121°C)

Typical K-Factor: 1/2” (P05) 2,4001” (P10) 540

Wetted Materials: Housing: PVDFBearings: Ceramic - 98% AluminaShaft: Ceramic - 98% AluminaRotor: PVDFRings: Viton

Optional O-Ring: Teflon®

Frequency Range: 1/2” (P05) 48 - 480 Hz @ 1.2 - 12 GPM1” (P10) 45 - 450 Hz @ 5 - 50 GPM

Strainer Size: 1/2” (P05) 55 mesh1” (P10) 28 mesh

Maximum Flow: 1/2” (P05) 15 GPM (56.8 LPM)1” (P10) 75 GPM (284 LPM)

Shipping Weight: 1/2” (P05) 1.3 lbs./0.6 kg - Turbine Only: 1.1 lbs./.54 kg1” (P10) 1.9 lbs./0.8 kg - Turbine Only: 1.7 lbs./.77 kg

ELECTRONIC CHOICES




Looking for a turbine meter that canhandle aggressive chemicals? Look at thePVDF Meter for a housing material thatresists abrasion and has great chemicalcompatibility.

Use PVDF Meters with harsh chemicals:Bleach, Ferric Chloride, Phenol, SulfuricAcid or Phosphoric Acid.


�� Precision accuracy in a lightweight anddurable meter.

�� Installs easily.

�� Available with Local Display or RemoteTransmitter.

�� Local Display Computer features: 2 Totals(1 Resettable, 1 Cumulative); FactoryCalibration in gallons and litres; 2 UserCalibrations and Flowrate.


�� One field replaceable internal part makingmaintenance easy.

Select Your Fitting Size:1/2 inch 1 inch

G2 Industrial Meters - PVDF

��ATEX

build-your-own g2 series meter - schibuola.com gpi... · ss ind. grade: s05 (1/2 in.) tri-clover...

Documents