www.irsAuctions.com®

PH: 717-854-0316 FX: 717-843-7826

INDUSTRIAL RECOVERY SERVICES, INC.P.O. Box 5086 • York, PA 17405

Terms: 10% Buyer’s Premium. Full payment day of auction, strictly cash or cashiers check. Personal or companychecks ONLY with an irrevocable verifiable bank letter of Guarantee with statement of limits. Full payment must bemade before leaving premises. Equipment is offered “As is – where is” with no expressed or implied warranties. Some equipment subject to prior sale. Other terms will be posted at the auction site.

Ian Liebgott # AU003449LIndustrial Recovery Services #AY000178L

On the Premises & Webcast!

If you can't attend this auction in person, simultaneous, real-time internet bidding will be available on major equipment. Please contact our office (no less then three days prior to the auction) to set up your web-cast account.

Cabinet IndustriesLarge Late Model Panel Processing &Hardwood Plant for Auction!400 Railroad Street • Danville, PA

November 10th 10:00 amInspection Date: November 9th

Featured Items!• (2) Heian ZR-442P-R4D4-2616W CNC Routers

Twin table, (2) 102-1/2" x 63" tables, (4) routing heads, each with a piggybackrouter & drills (New 2002)

• (2) Heian NC-431P & NC-431P 2513 CNC RoutersSingle table; (4) routing heads with piggyback drills

• (2) Thermwood C42 CNC RoutersTwin table, (2) 60" x 60" tables, (2) drilling stations (New 2002 & 2001)

• (6) Thermwood C40 CNC RoutersSingle table (New in 2001, 2000, 1999)

• Weeke BP100 CNC Machining Center2- Zone operation, (6) routing heads, grooving saw, vertical & horizontal drill

assemblys (New 2000)

• Biesse Rover 30 S2 CNC Machining Center2- Zone operation, 7-position tool changer, HSD router head, vertical & horizontaldrilling (New 2000)

• (2) Holzma Optimat HPL11/43/16 CNC Panel SawsRear load, 4300mm cutting length, 125mm saw blade projection (New 2002)

• Holzma HPL11/38/16 Rear Load CNC Panel Saw3800mm cutting length, 125mm saw blade projection (New 1999)

• Dodds SE-25CNC-TS CNC Programmable Dovetailer 25-Spindle programmable (New 2004)

• Ott AV12 Single Side EdgebanderSuper finishing & buffing, programmable control with return conveyor (New 2002)

• Weinig U22N 7-Head Feed Thru Moulder w/ Universal& Hopper Feed; Hopper feed, 90" infeed, Groove feed bed, 9" x 4-7/8"cap., Head configuration: 1st bottom 5.5kw, 230/460v, 2nd right 5.5kw, 208-230/460v, 3rd left 5.5kw, 230/460v, 4th right 5.5kw, 230/460v, 5th top 15hp,230/460v, 6th bottom 15hp, 230/460v, 7th universal 15hp, 230/460v, 5.5kw,230/460v feed motor, Variable feed speed 20 fpm to 118 fpm max.

• Weinig U17AL 5-Head Feed-Thru Moulder w/ HopperFeed; Hopper feed, 60" infeed, 7" x 6" cap., Head configuration: 1st bottom5.5kw, 230/460v, 2nd right 5.5kw, 230/460v, 3rd left 5.5kw, 230/460v, 4th top9kw, 230/460v, 5th bottom 7.5kw, 230/460v, Feed motor 5.5kw, 230/460v,Variable speed feed 21-160 fpm

• Pinheiro AMA300 Gang Rip Saw12-3/4" arbor cap., 2.4kw, 220/440v feed motor, 44kw, 220/440v saw motor,.37kw raise & lower motor, (2) set kickback fingers, (3) sets hold down rollerstop infeed & (3) sets outfeed side, Sliding adjustable locking fence, 14" max.blade cap., 2-3/4" bore, additional sleeve & spacers

• Celaschi 480N Double End TenonerType TSA2B, cut off, T & B Score, T & B tenon, high speed cope, universalmotors, computerized opening & height, digitals on all heads (New in 2002)

• (2) Mereen Johnson 400-4 Dbl. End Tenoners96" Cap, 96" Cap. opening, 60" load space, (2) Center mounted panel supportarms, 70" long alignment fence, loaded

• Bacci TSG-2T European Tenoner (New 2000)

• Butfering ST0213RC 2-Head 1350mm Wide BeltSander Sanding width 1350mm, Working height min. 750mm - max.900mm, Max. work piece thickness 150mm (New 2003)

• (4) A & S V-Groovers10HP, various sizes

• Large Selection of Forklifts!Clark, Mitsubishi, Daewoo, Linde, Cascade, & Crown!

Do Not Under-Estimate the Size of This Sale! There isMuch, Much More!!!

Hundreds of Lots Including:CNC Routers • CNC Machining Centers • CNC Panelsaws • Dovetailer •Edgebanders • Moulders • Gang Rip Saw • Straight Line Rip Saw • Double EndTenoners • European Tenoners • Wide Belt Sanders • V-Groovers o Forklifts &Pallet Trucks • Skid Lifts (over 45 available!) • Air Compressors/Air Dryers • DustCollectors o Finishing Equipment • Dubois Print & Coating Line • Hauncher •Sliding Table Saws & Table Saws • Bandsaws • Borers/Drill Presses • ChairEquipment • Clamp • Jointer • Material Handling • Planers • Manual Routers •Misc. Sanders • Stroke Sanders • Radial Arm Saws • Shapers

Large item specifications available on the web!

Thermwood C42 CNC Routers New in 2002! (2) Available!

Heian Twin Table CNC RouterNew in 2002! (2) Available!

Celaschi Double End Tenoner New in 2001!

Holzma Optimat Panel SawHPL11/N/38/16 - Rear-Load

New in 1999!

Biesse Rover 30S2 Machining CenterNew in 2000!

Dodds SE - 25CNC-TS CNC Dovetailer New in 2004!

Bacci TSG-2T EuropeanTenoner - New in 2000!

Weeke BP 100 CNC MachiningCenter - New in 2002!

Thermwood C40 CNC Routers New in 2000! - (5) Available!

Holzma Optimat HPL11/43/16 CNC Panel SawNew in 2002! (2) Available!

Ott AV12 Edgebander New in 2002!

Mereen Johnson 400 Double End Tenoner(2) Available!

Butfering 2 Head Widebelt SanderNew in 2003!

Pinheiro AMA300 Gang Rip Saw

Large Quantity of Forklifts!

Weinig U22N 7-Head Feed Thru Moulder w/Universal & Hopper Feed

Dixie Dust System Mattison 404 StraightLine Rip Saw

A & S Machinery V-GrooverNew in 1997!

Weinig U17AL 5-Head Feed-Thru MoulderWith Hopper Feed

Traviani B-501 VIA-230 Vacuum Pump (2001)

EMA K3-1600 Sliding Tablesaww/ Steff Feeder

CR Onsrud 3025 Inverted Router(1995)

Cemco 2000 Wide Belt Sander

2002! 2 Avail. 2002! 2 Avail.

2002! 2 Avail.

2001!

2004!2000!1999!

2000!5 Avail.2002!

2002!

2000!

2003!

4 Avail!1997! 2001!

1995!

2 Avail.