bss related commands
TRANSCRIPT
BSS RELATED COMMANDS ********************* For Checking TRU Faults ****************************************** RXTCP : MOTY = RXOTG, CELL = LH11542; ! Show TG Number! RXCDP: MO=RXOTG-100; ! ShowTG Internal configuration ! RXASP : MO = RXOTG - 100 ; ! Show Alarm Status ! RXMFP :MO=RXOTG-,SUBORD,FAULTY; ! Showe Fault Code ! RXMSP :MO=RXOTRX-34-9,SUBORD; ! Show status information !
******************CF-TG--TRX--TS--TF & DIP(Block/Deblock/ Reset)*********************** RXBLI:MO=RXOCF-xxx, FORCE; ! CF Reset RXBLE:MO=RXOCF-xxx; RXBLI: MO= RXOTG-157, FORCE, SUBORD; ! TG Reset ! RXBLE: MO= RXOTG-157, SUBORD; RXBLI: MO= RXOTRX-157-4, FORCE, SUBORD; ! TRX Reset ! RXBLE: MO= RXOTRX-157-4, SUBORD; RXBLI: MO= RXOTS-157-4-4, FORCE, SUBORD; ! TS Reset ! RXBLE: MO= RXOTS-157-4-4; ! RXBLI: MO= RXOTF-209, FORCE; ! TF Reset ! RXBLE: MO= RXOTF-209; DTBLI:DIP=24RBL2; ! DIP Reset ! DTBLE:DIP=24RBL2; *************** DIP Quality-Error Reset ************************************************** DTSTP : DIP = 12RBL2; ! Dip Status ! DTQUP : DIP = 12RBL2; ! Dip Quality ! DTQSR : DIP = 12RBL2,DEGR,UNACC; ! Dip Error Reset ! *************** In-Service,Out Of Service*********************************************** RXBLI: MO= RXOTG-157, FORCE, SUBORD; ! Block the Site ! RXESE: MO=RXOTG-157 ; ! Out Of Service ! RXESI: MO=RXOTG157- ; !Engaged! ! In Service ! RXBLE:MO=RXOTG-157,SUBORD; ! De Block the site ! *************** Halt & Un-Halt Of Site************************************************* RLSTP:CELL=QU47721; ! Shows site is Halted or Un-Halted ! RLSTC:CELL=QU47721,STATE=HALTED,CHGR=0&1; ! Halts thwe Site ! RLSTC:CELL=QU47721,STATE=ACTIVE; ! Un-Halt the Site ! *****************For Neighbouring Relationship Between Cells******************************* RLNRP: CELL= KA20451, CELLR=ALL, NODATA; ************* DATA PROCESSING SYSTEM FUNCTIONS, CP WORKING STATE, PRINT ******************** DPWSP;
******************For ET and KLM*************************************************** ! Find DIP No First ! RXAPP:MO=RXOTG-209; ! Show the Devices for TG,Devices/32 = DIP Number ! RADEP:DEV=RBLT2-400; ! Show the ET and SNTINL Number! ! When Dip Number is already Known ! DTDIP:DIP=144RBL2; ! Show the ET Number ! NTCOP:SNT=ETM2-2; ! Show the DIP number using SNTINL ! TPCOP:SNT=ETM2-5; ! Show KLM ! RXMDP: MOTY=RXOTRX; !Provide devices for the connected TRXs,CF& TS ! **************** TO TEST AN MO ************************************************* RXTEI: MO=RXOTRX-120-0; Valid for all except TG ****************** FOR CELL CONFIGURATION DATA******************************** MGBSP:BSC=ALL; ! Show all BSC’s ir MSC ! RLCRP: CELL=ALL; ! Show all Cells in BSC ! RXTCP:MOTY=RXOTG; ! Show all TGs For BSC ! RXMOP: MO=RXOTG-100; ! Gives the Site ID for the specified TG. ! RLNRP:CELL=KS3341,CELLR=ALL,NODATA; !Show cell neighbors! RXMOP:MO=RXOTX-7-0&&11; !Gives distribution of Radios against cell under specified TG group! ******************* To Enable-Disbale Frequency Hoping ********************************** RLCHP: CELL=QU84561; RLCHC: CELL=QU84561, HOP=ON; ! HOP=OFF; ! ************ FOR EXTERNAL ALARMS AT A NETWORK EPREMISES********************** ALLIP: PRCA=53, ACL=A1; (It’s a critical alarm) A1: Class critical! **************** TO CHECK FOR CELL BARRING (BCCH DATA)**************************** RLSBP: CELL=WW54891; CB: Cell barred RLSBP: CELL=ALL;
**************** TO BARR UNBARR A CELL ******************************************* RLSBC: CELL=WW54891, SB=YES/NO; ************* CONFIGURATION FREQUENCY DATA ********************************* ************** FOR BOTH HOPPING AND BARRING STATUS ************************* Plgsp:cell=26261;dtstp:qidtdip== ************** For LOGICAL CHANNEL DETAILS ************************************ RLSLP: CELL=LH12001; NCH: No. of Channels CBCH: Cell Broadcast Control Channel BCCH: Broadcast Control Channel TCH: Traffic Channel SDCCH: Stand alone Dedicated Control ChannelDT ************************ FOR DATA ABOUT A TRANSCODER POOL ***************** RRTPP: TRAPOOL=ALL; Transcoder:Interface between MSC and BSC. RRTPP: TRAPOOL=ABC; ****************** FOR GPRS DATA AND ACTIVATION **************** RLGSP: CELL=WW54891; Print GPRS Status and configuration RLGSI: CELL=WW54891; Enable GPRS RLGSE:CELL=WW54891; Disable GPRS RRGBP: DETAIL;
NSS RELATED COMMANDS ************** FOR Routes Carrying C7 Signaling ****************************** C7LTP: LS=ALL; C7LDP:LS=2-2048; ! Use E1 Calculator to calculate DIP Number,OR use EXDEP + NTCOP ! DTDIP:DIP=0UPD1&1UPD1; DTSTP:DIP=0UPD1&1UPD1; TPCOP:SNT=ET1551-2; ***************** For KLM Using DIP. ************************* DTDIP:DIP=44RBL2; ! Give the ETM2 Number—SNT Number ! TPCOP:SNT=ETM2-1; ! Give the KLM ! ***************** For the Dip and KLM no. ************************* STRSP: R= all; !Show All Routes ! STRSP:R=TSG14T1; !Show Route\Device State ! STRDP: R=TSG14T1; ! Show all devices and their staus for route ! STRDP: R=TSG14TI, STATE= IDLE; ! Provide E1’s(UPD’s) for the route in Idle state only ! EXDEP:DEV=UPD1-9029; !Provide the SNT/Devp OR Use E1 Calculator) ! NTCOP:SNT=ET1551-2; ! Provide the Dip Number ! TPCOP:SNT=ET1551-2; ! Provide KLM ! ******************** For SDIP STATE*********************************** TPSTP: SDIP=7ETM2; ******************** For SNT STATE********************************** NTSTP: SNT=ETM2-7; ********************* For Dip status************************************* DTSTP: dip = 201upd1; *********************For Device status for a specific DIP********************** DTDIP: DIP=312RBL2; ( Would display the SNT NO. for the given DIP) NTCOP: SNT=ETM2-7; ( Would display the DIPs & Device range for the given SNT) STDEP: DEV=UPD1-; (Would display the device status for the given range ov devices) ******************* FOR EXTERNAL ALARMS ON AN MSC *********************** Allip: alcat= power; Allip: alcat= ext; ******************* For Cell CGI ********************************************** MGCEP:CELL=KA22311;r;
******************** B NO. ANALYSIS ***************************************** Anbsp:b= 30-0426307; anrsp: rc = 201; strsp:r= msc01to; strdp: r= msc01to; ******************** FOR TAKING BACK UP(dump) ******************************* SYBFP: FILE; SYBUE; SYBUP: FILE; SYTUC; SYBUI; Ks1216 ************************* FOR SIZE ALTERATION *************************** DBTSP: TAB=SAACTIONS; SYBUE; SAAII: SAE= , BLOCK= RMNR, NI= ; To increase the size of a data file in the CP SAADI:SAE= , BLOCK= RMNR, NI= ; To decrease the size of a data file in the CP SAALI*; Action list, initiate: to adjust NI to their required value SAAEP: ********************* For CP State***************************************** DPWSP; ******************* For C7 link set supervision data *********************************** C7SUP: LS= ; ********************* For MTP routing supervision data ******************************* C7RUP: DEST= ; ******************** For routing specification of a destination ************************ C7RSP:DEST= ; ― c7 routing specification, print‖ ******************* To find the SPC of a node ***************************** C7SPP:SP=ALL; ****************** Blocking/deblocking of c7 links ********************************** C7lae: ls=2-6006, slc=00; ―for blocking/deactivating the links ― C7lai: ls=2-6006, slc=00; ―for deblocking/activating the links‖ ***************** Device and Route DATA commands ****************************** Exdep: dev= ; for dev data wrt route Exdrp: dev= ; for dev data wrt rp & em Strsp: r= ; for route data
Strdp: r= ; for route data Exrop:r= ; For route data *********************** TO RECTIFY GROUP SWITCH FAULT *************************** GDSTP; ― For distributed Goup switch status‖ GDBLI: UNIT= CLM-0; ― For blocking the units of the group switch‖ GDTEI: UNIT= CLM-0; GDBLE: UNIT= CLM-0; ― For unblocking the units of the group switch‖ *********************** FOR RESETING THE ABL DEVICES ON A WHOLE ROUTE************* SEQAR: R= MSC03TO; ― Siezure quality supervision alarm, reset ― ― to reset devices blocked due to poor speech quality‖ ****************** TO RECTIFY TEST SYSTEM ACTIVATED ALARM ************************ Allip: acl=01;MML ― Will give us the required AD value‖ Aploc; ―AP Maintanance, AP local mode, change‖ ― Starts a shell program and connects to the AP‖ Mml –d ad -187 ―Connects to the required AD, do not use semi colon‖ End test Exit ******************TO VIEW FILES IN THE L DRIVE*********************************** APLOC; CD FMS/DATA And so on and so forth!! ************************************ MONTI ****************************************** EXTPI: BNB=923214005509; (Exchange data, test position, initiate) MONTI: DEV=UPD1-32318; (Monitoring, initiate) CON; /SON; END; ********************** COMMANDS FOR THE HLR REPORT ************************ SAAEP: SAE=261; SAAEP: SAE=ALL, BLOCK=ASD; HGIDP: ALL; (Home location register, subscribers with incompatible data, print) ********************** SOFTWARE FAULT ESCALATION *************************** SYRIP: SURVEY; software recovery information SYRIP: EVENT; to specify the software recovery event nDCPo. LASIP:BLOCK=ALL; to enumerate software blocks—P
********************* RP FAULT ********************************************* EXRPP:RP=261;OOI EXEMP:RP=261,EM=ALL; REPRI:RP=261; (Repair Function, RP repair, initiate –- gives the PCB No.) REMRI:RP=261, PCB=11; (Repair Function, Manually repair RP, initiate)(put quotation marks whenever there is a -) RECRI:RP=261; (Repair Function, Check for RP repair, initiate ) *********************** Charging fault rectification ********************************* ICZAR:CC= 10; ************************ Siezure of Phuddo Alarms ******************************* ACEASE:100:1 *********************** TO SEPARATE THE CP STANDBY SIDE******************* DPSES; ********************* TO RESTART THE CP ************************************ SYREI: RANK=SMALL/ LARGE/RELOAD ****************** TO FIND THE GTT OF A NO. SERIES (NS) ************************* C7GSP:TT= , NP= , NA= , NS= ; (TT= Title Translation, NP=Numbering plan, NA=Nature of address indicator, NS= Numbering Series) C7GCP:GTRC= ; (GT routing case) Answer Pint [PTERM= Primary terminating, PINTER= Primary intermediate, STERM, SINTER] C7SPP:SP= ; ********************** For Event log **************************************** Erepp:enum=all; ―Event reporting, event No. ― APG 40 RELATED COMMANDs ****************** TO REBOOT THE APG******************************************* APLOC; PRCBOOT *************** TO CHECK FOR THE PATH OF A FILE ****************************** CPFLS –P RCEFILE1 ****************** TO VIEW THE ALARMS AT THE ADJUNCT PROCESSOR ****************** APAMP; AP Maintenance data APLOC;
ALIST AP Alarms listing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CLUSTER NODE The nodes (sides) of the APG CLUSTER RES The resources (processes) of the APG CLUSTER RES | FINDSTR -VE ONLINE PRCSTATE State of the APG (Whether active or passive) *********************** TO CHECK FOR LI FILES********************************** APLOC; CPFLS CPFLS –P RCEFILE1 CD/D L:\FMS\DATA\CPF\TEMPVOLUME\RCEFILE1 DIR ************************* TO MOVE CDR FILES FROM Y DRIVE TO F DRIVE *********** ********************** TO PRINT THE MAINTANANCE DATA OF AN AP************* APAMP; (AP Maintenance data, print) ******************** TO REMOVE THE AP FILE PROCESSING FAULT CAUSE FILE TRANSFER FAILED ****************************** APLOC; ALIST ― PRINTS THE NODE ALARMS‖ TRANSFER QUEUE DESTINATION SET ALOGDESTTQ ALOGDESTDS CHECK: AFPLS -L ALOGDESTTQ AFPLS: AP File processing, list files ― List transfer queues defined ― -L: long list CDHDSLS –L ALOGDESTDS CDHDSLS: Common Destination Handling, Destination set, list ALOGDEST CDHLS –L ALOGDEST CDHLS: Common Destination Handling, Destination, list Gives the parameters associated with the given Dest PING 10.3.12.132 The IP Given OR
CDHVER ALOGDEST Verify the connection to the Dest APFLS –L –S ALOGDESTTQ ―AP File processing, list files‖ -L: Long list -S: Specify all files or directories SOLUTION: AFPFTI –F ALOGDESTTQ ―AP file processing, manual transfer, initiate‖ Used to manually transfer files or directories with the status failed. AFPLS –L –S ALOGDESTTQ 0321-2918720 RESULT: ALIST Kindly execute the following commands regarding the activation of call diverts: hgsdc:msisdn=923219087588,sud=cfnry-1; hgsdc:msisdn=923219087588,sud=cfu-1; hgsdc:msisdn=923219087588,sud=cfb-1; hgsdc:msisdn=923219087588,sud=cfnrc-1; **********************Seizure Supervision********************************************** ALLIP:ACL=A2; SEQAR:R= Route Name; allip; allip:alcat=apz;
rlcrp:cell=all; rlcrp:cell= ; allip:prca=53; allip:prca=42; rxasp:moty=rxotg; **************************** For Dip *********************************** rxtcp:moty=rxotg,cell=LH10541; rxapp:mo=rxotg-29; radep:DEV= ; ntcop:snt= ; dtstp:dip=62rbl2; ********************** For Managed Objects Faulty ************************ rxtcp:moty=rxotg,cell=LH10541; rxapp:mo=rxotg-29; dtstp:dip=62rbl2; rxasp:mo=rxotg-29; rxmfp:mo=rxotrx-11-4,subord,faulty; ***************** Managed Object Configuration Data Print ***************** rxcdp:mo=rxotg-7; TS configuration *************************** For Reset of a site **************************** rxbli:mo=rxotrx-129-3 ,force,subord; rxtei:mo=rxo; rxble:mo=rxotrx-129-3 , subord; ***************************** Internal alarm of BSC ******************** rxasp:moty=rxotg; dpwsp; DATA PROCESSING SYSTEM FUNCTIONS, CP WORKING STATE, PRINT
**************** For Quality Check ***************************************
dtqup:dip=176rbl2; **************** Managed Objects Capabilities Print *********************** rxcap:mo=rxotg-263; *************** Site Reset Command ************************************* rxtcp:moty=rxotg,cell=ka20441; rxcdp:mo=rxotg-173; rxmfp:mo=rxocf-173; rxasp:mo=rxotg-; rxbli:mo=rxotg-21,subord,force; rxble:mo=rxotg-,subord; **************** MSC Commands For Dip ********************************* exdep:dev=upd1 - 9057; strdp:r=msc02to,state=bloc; strpl:r=msc02to; ntcop:snt=et1551-9; dtstp:dip=283upd1; tpcop:snt=et1551-1; # For KLM numbers and STM number(Sdip); ***************** HLR COMMANDS ********************************* hgsdp:msisdn=92321 ,all; hgsdp:msisdn=92321 ,suda; ****************** For Reseting a number in an LHR *********************** hgslr:msisdn=92321; ************** Cell Status ****************************************** rlstp:cell=all; ************** Cell Halt & Dehalt Command **************************** rlstp:cell=ka20721; rlstc:cell=ka20723,state=active,chgr=2;
************** Blocking Supervision Alarm ****************************** strp:r=mobg1to; strdp:r=mobg1to; *********** Rp Fault **************************************************** exrpp:rp=141; ***************** Dup:Backup ****************************************** sybue; sybue:file; ; sytuc; sybue; ************* Digital path Block & Deblock ******************************** dtstp:dip=all,state=abl; dtbli:dip=dip#; dtble:dip=dip#; ************* Radio Control Cell,Description Data,Print ******************** rldep:cell=ib30212; *********** Seizure Quality ********************************************** strdp:r=abopto; seqr:r=abopto; ************ A Party to B Party Routing Command ************************** anbsp:b=321-321; anrsp:rc=321; strsp:r=cca01to; exdep:dev=upd1-5985; ntcop:snt=et1551-4; dtstp:dip=187upd1; stdep:dev=upd1-5984&&6015; ********** Synchronous Path Quality Supervision ************************* s:sdip=5et1551,es2;
************* C7 Signalling Link Failuer ********************************** c7ltp:ls=all; strsp:r=ntc04to; strdp:r=bahpto; *********** C7 Signalling Block & Deblock ********************************* c7ltp:ls=all; c7ldp:ls=2-3002; c7ltp:ls=2-3002; c7lae:ls=2-3002,slc=2; c7lai:ls=2-3002,slc=2; *********** Cell Status ************************************************** rlstp:cell=all; ************* Digital Path Quality Supervision ****************************** dtqsr:dip=all,sfes; ********** Subscriber Refresh Number ************************************ hgsdp:msisdn=93214005506,all; mgslp:imsi=enter imsi#,all; hgslr:imsi=enter imsi#; ********* Con Queue Congestion **************************************** rxmsp:mo=rxocon-; rxbli:mo=rxocon-; rxble:mo=rxocon-; ********** Route Dip Checking Procedure(C7link) ************************** Strsp:r=ptcg1to; c7ltp:ls=all; c7ldp:ls=2-4416; exdep:dev=upd1-1136; ntcop:snt=et1551-2; dtstp:dip=35upd1;
******* Test Call ******************************************************** extpp; extpi:bnb=03214411111; tctdi:bnb=03004102217,dev=udp1-1353,aub=03214411111; con; end; ******* Size Alternation ************************************************** dbtsp:tab=saactions; saacii:sae=263,ni=200; ******* Active Subscriber Information ************************************* mgsvp; ****** B-Numbering Analysis ******************************************** anbsp:b=30-03348950; anrsp:rc=203; ******** All Destination Information ************************************* c7rsp:dest=all; ************** MSC Related Sites ************************************* mgcep: cell=all; mgcep:bsc=bsc03 // all msc related site of bsc. ************** E1 route working ************************************* dtstp:dip=250upd1; dtdip:dip=250upd1; dtble:dip=250upd1;
tpcop:sdip=9et1551; tpble:sdip=9et1551,lp=vc12-1; ************** GPRS Activation Command ****************************** hgsdp:msisdn=923215183650,all; hgcmp:msisdn=923214005942; hgpdi:msisdn=923215183650,eqosid=1; hgcmi:msisdn=923215183650,gsa=923210004301,sk=81,gprstdp=12,cch=3,deh=0; hgsnc:msisdn=923214005942,nam=0,keep; hgsnc:msisdn=923215183650,nam=0,keep; Dtstp:dip=0rbl2; dtbli:dip=0rbl2; dtdip:dip=0rbl2; tpstp:sdip=2ETM2; tpcop:snt=etm2-2; tpbli:sdip=2etm2,lp=vc12-0; rlstp:cell=all,state=halted; allip:alcat=ext;