bsc6810 v200r011c00 parameter reference

document.xls 文档密级

04/08/2023 华为机密，未经许可不得扩散第1页，共1418页

RNCV200R009

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

Email:

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

NoticeThe information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

BSC6810 V200R011C00Parameter Reference

http://www.huawei.com

[email protected]

http://www.huawei.com/

mailto:[email protected]




Huawei Technologies Co., Ltd.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.




The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.



Purpose

This describes RNC parameters, including the meaning, values, and usage of RNC parameters.

Version

Intended Audience

•Network planners•Field engineers•System engineers•Shift operators

Organization

Each parameter is described in the following aspects.

DescriptionParameter IDParameter Name

MML Command

NEDescriptionRelated FeatureValue TypeGUI Value Range

Actual Value Range

UnitDefault ValueRecommended ValueImpact

Parameter Relationship

Service Interrupted After Modification

Interruption Scope

Interruption Duration (min)

Caution

The product version related to this document is: BSC6810 V200R011C00



Access

Attribute



This describes RNC parameters, including the meaning, values, and usage of RNC parameters.

RemarksSimple string for identifying a parameterFull name of the parameter

NEs on which the parameter is setFunctions, functioning ways, and protocols of the parameterFeatures for which the parameter is usedParameter value typeParameter value range displayed on the GUI

Parameter value unitInitial value provided by the systemValues recommended in different scenariosParameter impact scope, that is, objects specified when the parameter is set

Whether modifying the parameter value may interrupt the existing services

Cautions to be taken during the modification

The product version related to this document is: BSC6810 V200R011C00.

Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command

Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF.

Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters.

Possible interruption scope in the case that modifying the parameter value may interrupt the existing services

Possible interruption duration in the case that modifying the parameter value may interrupt the existing services



Whether this parameter is read/write or read only

Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter

Parameter ID Parameter Name NE AAL2PATHT AAL2 Path Type RNC AbsTime Specify Time RNC Ac09ToAsc AC 0~9 to ASC mapping RNC Ac10ToAsc AC 10 to ASC mapping RNC Ac11ToAsc AC 11 to ASC mapping RNC Ac12ToAsc AC 12 to ASC mapping RNC Ac13ToAsc AC 13 to ASC mapping RNC Ac14ToAsc AC 14 to ASC mapping RNC Ac15ToAsc AC 15 to ASC mapping RNC AccessServiceClass Access service class RNC

ACFC Address and control field compr RNC AcIntervalOfCell AC Restriction Interval Of Cell RNC AcIntervalOfCells Access Class Restriction interva RNC AcRange Range of restrained Access Clas RNC

AcRstrctIntervalLen Interval length of Domain Speci RNC AcRstrctPercent AC Restriction Percent RNC AcRstrctSwitch AC Restriction Switch RNC ACTOBJECT Activate Object RNC ACTTYPE Type RNC ACU Added CPU occupancy RNC AFSetObj AFSetObj RNC AgpsActivateFlag A-GPS Method Active Flag RNC AGPSAddAssDataSendFla A-GPS Additional Data Send Fl RNC AGPSMethodType A-GPS Method Type RNC

AGPSRECEIVERID GPS ID RNC

AGPSRECEIVERTYPE GPS type RNC AICHPowerOffset AICH power offset RNC AICHTxTiming AICH transmission timing RNC

aid Alarm ID RNC AlignMode align type RNC AllBw Bandwidth RNC AllocCodeMode Allocate Code Mode RNC ALTITUDE GPS antenna altitude RNC ALTITUDEIMP GPS antenna altitude RNC alvl Alarm Severity RNC

AmntOfRpt2B 2B event retry max times RNC

AmntOfRpt2C 2C event retry max times RNC

AmntOfRpt3A 3A event retry max times RNC

AmntOfRpt3C 3C event retry max times RNC AmRlcCfgPara RLC AM mode parameters selec RNC AMRQosPerform QOS Switch For AMR Traffic RNC AmrRabAbnormRelRatioT AMR drop ratio Per Spu RNC AmrRabEstabAttMinNum The minimum of AMR Rab attem RNC AmrRabEstabSuccRatioTh AMR Rab successful setup ratio RNC AmrRabRelMinNum The number of AMR drop Per S RNC AmrUlRateAdjTimerLen Wait Timer For AMR Uplink Ra RNC ANI Adjacent node ID RNC ANI Adjacent node ID RNC ANI Adjacent node ID RNC

ANI Adjacent Node ID RNC AntennaAltitudeMeter Cell Antenna Altitude RNC AntennaAltitudeMeterImp Cell Antenna Altitude RNC AntennaLatitudeDegree Cell Antenna Latitude RNC AntennaLatitudeDegreeSec Cell Antenna Latitude RNC AntennaLongitudeDegree Cell Antenna Longitude RNC AntennaLongitudeDegreeS Cell Antenna Longitude RNC AntennaOpening Cell Antenna Opening RNC AntennaOrientation Cell Antenna Orientation RNC APFlag APFlag RNC APP Application type RNC AppliedDirect RAB applied direction RNC AREAFLAG Area flag RNC AREAFLAG Area flag RNC ARP10Priority User_priority of Allocation/Rete RNC ARP11Priority User_priority of Allocation/Rete RNC ARP12Priority User_priority of Allocation/Rete RNC ARP13Priority User_priority of Allocation/Rete RNC ARP14Priority User_priority of Allocation/Rete RNC ARP1Priority User_priority of Allocation/Rete RNC

ARP2Priority User_priority of Allocation/Rete RNC ARP3Priority User_priority of Allocation/Rete RNC ARP4Priority User_priority of Allocation/Rete RNC ARP5Priority User_priority of Allocation/Rete RNC ARP6Priority User_priority of Allocation/Rete RNC ARP7Priority User_priority of Allocation/Rete RNC

ARP8Priority User_priority of Allocation/Rete RNC ARP9Priority User_priority of Allocation/Rete RNC ARPRETRY ARP packet resend times RNC ARPTIMEOUT ARP packet time-out RNC ATMLOGICPORT The ATM Logic Port Number RNC ATMSN NodeB ATM_TRANS Slot No. RNC ATMSRN NodeB ATM_TRANS Subrack RNC ATT Attach/detach indication RNC

AUTHMODE Validate mode RNC

AUTHNAME Validate user name RNC

AUTHPWD Validate password RNC

AUTHTYPE Validate protocol type RNC AUTO Auto negotiation RNC AvailablesignatureEndInde Available signature end index RNC AvailablesignatureStartInd Available signature start index RNC AvailableSubchannelCtrlW Available subchannel control w RNC AvailCap Capability of CN Node RNC AVOL Alarm VOL. RNC BACK8KCLKSW1 Output Switch of backplane 8K RNC BACK8KCLKSW2 Output Switch of backplane 8K RNC BackgroundNoise Background noise RNC BACKUPPATH Path of Backup File RNC BAKIP Backup port IP address RNC BAKMASK Backup port mask RNC BAMIP BAM External Network Virtual RNC BAMMASK BAM External Network Mask RNC

BandInd Band indicator RNC BandWidthForFACH Bandwidth of Fach RNC BCC BS color code RNC BcchArfcn Inter-RAT cell frequency numbe RNC BcchHspdschPower BCCH HS-PDSCH power RNC BcchHsscchPower BCCH HS-SCCH power RNC BCHPower BCH transmit power RNC BEARTYPE DSP bear type RNC

BearType Bear Type RNC BeBitRateThd BE service handover rate thresh RNC BeCpc2EFachStateTransTi BE CPC_HS-DSCH to E_FACH tr RNC BeCpc2FStateTransTimer BE CPC_HS-DSCH to FACH tran RNC BeD2EFachStateTransTime BE DCH to E_FACH transition RNC BeD2FStateTransTimer BE DCH To FACH Transition T RNC BeDlAct1 First Action For BE Downlink RNC BeDlAct2 Second Action For BE Downli RNC BeDlAct3 Third Action For BE Downlink RNC BeE2FStateTransTimer BE E-DCH To FACH State Tran RNC

BeEFach2CpcTvmThd BE E_FACH2CPC_HS-DSCH 4 RNC BeEFach2CpcTvmTimeToT BE E_FACH2CPC_HS-DSCH 4a RNC

BeEFach2DTvmThd BE E_FACH2D 4a threshold RNC BeEFach2DTvmTimeToTri BE E_FACH2D 4a time RNC

BeEFach2HTvmThd BE E_FACH2HS-DSCH 4a thres RNC BeEFach2HTvmTimeToTri BE E_FACH2HS-DSCH 4a tim RNC BeF2CpcETvmThd F2CPC_E-DCH 4a Threshold RNC BeF2CpcETvmTimeToTrig FACH2CPC_E-DCH 4a Time RNC

BeF2CpcHTvmThd BE F2CPC_HS-DSCH 4a thresh RNC BeF2CpcHTvmTimeToTri BE F2CPC_HS-DSCH 4a time RNC

BeF2DTvmThd BE F/R2D 4a Threshold RNC BeF2DTvmTimeToTrig BE F/R2D 4a Time RNC BeF2ETvmThd BE F2E-DCH 4a Threshold RNC BeF2ETvmTimeToTrig BE F2E-DCH 4a Time RNC

BeF2HTvmThd BE F2HS-DSCH 4a Threshold RNC BeF2HTvmTimeToTrig BE F2HS-DSCH 4a Time RNC BeF2PStateTransTimer BE FACH To PCH Transition T RNC BeH2EFachStateTransTime BE HS-DSCH to E_FACH transit RNC BeH2FStateTransTimer BE HS-DSCH To FACH Transit RNC BeH2FTvmPTAT BE HS-DSCH2F 4b Pending Ti RNC

BeH2FTvmThd BE HS-DSCH2F 4b Threshold RNC BeH2FTvmTimeToTrig BE HS-DSCH2F 4b Time RNC BeHsupa2msTtiRateThs Rate threshold of BE on 2ms T RNC BEInterIurRateUpTimer Timer For BE Inter Iur Rate RNC

BePwrMargin Be Event F Reporting Power Ma RNC BEQosPerform QOS Switch For BE Traffic RNC BetaC Reference BetaC RNC BetaD Reference BetaD RNC BeUlAct1 First Action For BE Uplink QO RNC BeUlAct2 Second Action For BE Uplink RNC BeUlAct3 Third Action For BE Uplink Q RNC BeUlEvTrigInd Indicator For BE Uplink QOS E RNC BeUlQos5AMcSwitch Measurement Of 5A Switch RNC BeUlQos6A1McSwitch Measurement Of 6A1 Switch RNC BeUlQos6DMcSwitch Measurement Of 6D Switch RNC BeUlRateAdjTimerLen Wait Timer For BE Uplink Rate RNC BFDDETECTCOUNT detect multiplier of BFD packet RNC BGGBR Background MAC-c flow GBR RNC BGMBR Background MAC-c flow MBR RNC

BgnAbnormalThd Background noise abnormal thre RNC BGNAdjustTimeLen Background noise update contin RNC

BgnEndTime Background noise update end ti RNC BGNEqUserNumThd Equivalent user number threshol RNC

BgnStartTime Background noise update start t RNC BGNSwitch Auto-adaptive background noise RNC

BgnUpdateThd Background noise update trigger RNC BLERQuality Target value of service DCH_ RNC

BlindHoFlag Blind handover flag RNC BlindHOIntrafreqMRAmou Intrafrequency measurement rep RNC BlindHOIntrafreqMRInterv Intrafrequency measurement repo RNC BlindHOPrio Blind handover Priority RNC BlindHOQualityCondition Blind handover condition RNC

BlindHORSCP1FThreshold 1F event blind handover trigger RNC BLOREQTMR Blocking request timer RNC boxflg Report Flag RNC BRDCLASS Board class RNC BRDTYPE Board type RNC BRDTYPE Board type. RNC BRDTYPE Board type RNC BRDTYPE Board type RNC

BSICVerify BSIC verify switch RNC BSICVerify BSIC verify switch RNC BT Board type RNC BT Board type RNC BT Board type RNC BT Board type RNC BT Board type RNC BT Board type RNC BT Board type RNC BT Board Type RNC BT Board type RNC BT Board type RNC BWADJ Auto adjust bandwidth switch RNC

BWDCONGBW Backward congestion threshold RNC

BWDCONGBW Backward congestion threshold RNC BWDCONGBW Backward congestion threshold RNC BWDCONGBW Backward congestion threshold RNC BWDCONGBW Backward congestion threshold RNC BWDCONGBW Backward congestion threshold RNC

BWDCONGCLRBW Backward congestion clear thres RNC BWDCONGCLRBW Backward congestion clear thres RNC BWDCONGCLRBW Backward congestion clear thres RNC BWDCONGCLRBW Backward congestion clear thres RNC BWDCONGCLRBW Backward congestion clear thres RNC BWDCONGCLRBW Backward congestion clear thres RNC

BWDHORSVBW Backward handover reserved ba RNC BWDHORSVBW Backward handover reserved ba RNC BWDHORSVBW Backward handover reserved ba RNC BWDHORSVBW Backward handover reserved ba RNC BWDHORSVBW Backward handover reserved ba RNC BWDHORSVBW Backward handover reserved ba RNC BWMAXRATIO Max bandwidth estimate ratio RNC BWMODE Bandwidth Mode RNC BWRTPTH Load Control algorithm BandW RNC

CacSwitch CAC algorithm switch RNC

CallShockCtrlSwitch Call Shock Control Switch RNC CallShockJudgePeriod Call Shock Judge Period time le RNC CarrierTypePriorInd Indicator of Carrier Type Priorit RNC CARRYF Bearing subrack No. RNC CARRYFLAG Carry Flag RNC

CARRYFRAATMLNKN Bearing FRAATM link No. RNC CARRYFRAATMLNKN FRAATM link No. RNC

CARRYIMAGRPN Bearing IMA group No. RNC CARRYIMAGRPN IMA group No. RNC

CARRYLNKT Bearing link type RNC

CARRYNCOPTN Bearing NCOPT port No. RNC CARRYPN Optical port No. RNC

CARRYSN Bearing slot No. RNC CARRYSRN Bearing subrack No. RNC CARRYT The bearing type of the logic por RNC CARRYT The bearing type of the logical p RNC

CARRYT Bearing type RNC

CARRYUNILNKN Bearing UNI link No. RNC CARRYUNILNKN UNI link No. RNC

CARRYVCI Bearing VCI RNC

CARRYVPI Bearing VPI RNC

CARRYVPN Bearing ATMLGCPORT port N RNC CBCIPADDR CBS CBC IP address RNC CBCMASK Subnet mask RNC CBS Consent burst size RNC CBSOpIndex CBS Operator Index RNC CBSSAC CBS SAC RNC CBSSAC CBS SAC RNC CBSwitch CB Switch RNC CCCHGBR CCCH MAC-c flow GBR RNC

CCCHMBR CCCH MAC-c flow MBR RNC CCHPRIPATH Common channel primary path RNC CCHPRITH Common channel pri path load t RNC CCHSECPATH Common channel secondary pat RNC CCHSECWHT Common channel pri sec path loa RNC CCMINTERVAL CCM Send Prid RNC CCMODE Activation mode RNC

CCTMR Timer_CC RNC CDVT Cell delay variation tolerance RNC CellAmrRrcNum AMR_RRC Number per Second f RNC CellAverageHeight Cell Average Altitude RNC CellAverageHeightImp Cell Average Altitude RNC

CellCapacityAutoHandleSw Cell Capability Auto Handle Sw RNC

CellCapContainerFdd Cell capability container RNC CellCenterAltitude Cell Center Altitude RNC

CellCenterAltitudeImp Cell Center Altitude RNC CellCenterLatitude Cell Center Latitude RNC CellCenterLatitudeSec Cell Center Latitude RNC CellCenterLongitude Cell Center Longitude RNC

CellCenterLongitudeSec Cell Center Longitude RNC CellChoice Target cell choice RNC CellEnvironment Cell Environment Case RNC CellEnvType Cell environment type RNC

CellHeightStd Cell Altitude Standard Deviatio RNC

CellHeightStdImp Cell Altitude Standard Deviatio RNC CellHighPriRrcNum HiPri_RRC Number per Second f RNC CellHostType Cell Host Type RNC CellId Cell ID RNC

CellId Cell ID RNC CellId Cell ID RNC CellIDChgPeriod Cell ID Changing Period time le RNC CellIDChgSwitch Cell ID Changing Switch RNC CellidRttActivateFlag CELLID+RTT Method Active F RNC CELLIDRTTMethodType CELLID+RTT Method Type RNC CellLdrSfResThd Cell LDR SF reserved threshold RNC CellLocCfgType Cell Location Setting Type RNC

CellName Cell name RNC

CellOverrunThd Cell overload threshold RNC CellReSelectCounter Cell Reselection Counter Thresh RNC CellReSelectTimer Cell Reselection Timer RNC CellReservationExtension Cell reservation extension RNC CellReservedForOperatorU Cell reserved for operator use RNC CellsForbidden1A Affect 1A threshold flag RNC CellsForbidden1B Affect 1B threshold flag RNC CellTotalRrcNumThd Cell Call Shock Trigger Thresho RNC

CellUnderrunThd Cell underload threshold RNC

CfgRacInd RAC Configuration Indication RNC

CfgSwitch Channel configuration strategy RNC ChannelRetryHoTimerLen Channel Retry Ho Timer Length RNC ChannelRetryTimerLen Channel Retry Timer Length RNC ChCodingType Channel code type RNC CHECKCOUNT Ping Check Timeout Counts RNC ChIdx Channel Index RNC CHKN Check Index RNC CHKN Check Index RNC CHKSUMRX Calculate checksum when recei RNC CHKSUMTX Calculate checksum when send RNC CHKSUMTYPE Checksum arithmetic RNC CHKTYPE Check type RNC

ChoiceRprtUnitForDlBasi Time unit for DL basic meas rpr RNC

ChoiceRprtUnitForDlOlcM Time unit for DL OLC meas rprt RNC

ChoiceRprtUnitForHsdpa Time unit of HSDPA need pwr m RNC

ChoiceRprtUnitForHsdpaR Time unit of HSDPA bit rate me RNC

ChoiceRprtUnitForHsupaR Time unit of HSUPA bit rate me RNC

ChoiceRprtUnitForUlBasi Time unit for UL basic meas rpr RNC

ChoiceRprtUnitForUlOlcM Time unit for UL OLC meas rprt RNC

ChoiceRptUnitForAmrE Amr Reporting Period Unit For RNC

ChoiceRptUnitForBeE Be Reporting Period Unit For E RNC

ChoiceRptUnitForBeF Be Reporting Period Unit For E RNC

ChoiceRptUnitForVpE Vp Reporting Period Unit For E RNC ChSwitch Channel Switch RNC CID GSM cell ID RNC CIO Cell Individual Offset RNC

CIO Cell oriented Cell Individual Off RNC CIOOffset Neighboring cell oriented CIO RNC

CIOOffset Neighboring cell oriented CIO RNC CIR Bandwidth RNC CLKTYPE Clock board type RNC CLTAModeInd Closed loop time adjust mode in RNC CmCap Compression mode capability RNC

CmcfCellType CM cell type RNC CmcfSwitch CMCF algorithm switch RNC CmchRsrcRspTmr CMCH RSRC response timer RNC

CmpSwitch Compatibility switch RNC

CNDomainId CN domain ID RNC

CNId CN node ID RNC CNLoadStatus Status of CN Node RNC CNMNGMODE Resource Management Mode RNC CNOPERATORINDEX Cn Operator Index RNC CnOperatorName Cn Operator Name RNC CnOpGrpIndex Cn Operator Group Index RNC

CnOpGrpIndex CN Operator Group Index RNC CnOpGrpName Cn Operator Group Name RNC CnOpIndex Cn Operator Index RNC CnOpIndex Cn Operator Index RNC CnOpIndex1 Operator 1 Index RNC CnOpIndex2 Operator 2 Index RNC CnOpIndex3 Operator 3 Index RNC CnOpIndex4 Operator 4 Index RNC CnOpIndexComm Common Operator Index RNC CnOpNum Operator Number RNC CNProtclVer CN protocol version RNC CodeAdjForHsdpaSwitch Code Adjust Switch for HSDPA RNC CodeAdjForHsdpaUserNu User Number for Code Adjust RNC

CodeBalancingDrdCodeRa Code occupied rate threshold fo RNC

CodeBalancingDrdMinSFT Minimum SF threshold for code RNC

CodeBalancingDrdSwitch Code balance drd switch RNC CodeCongSelInterFreqHoI Code congestion select inter-fre RNC CodeScheme Code Scheme RNC

CoexistMeasThdChoice InterFreq and InterRat coexist RNC CombNCellPercent Combine Neighbour Cell Percen RNC

CombPwrMargin Comb Event F Reporting Power RNC

CommPlmnUsingType Comm Plmn Using Type RNC COMTMR1 Timer T1 RNC COMTMR2 Timer T2 RNC COMTMR3 Timer T3 RNC CONGCLRTHD0 Recover threshold of queue 0 RNC CONGCLRTHD1 Recover threshold of queue 1 RNC CONGCLRTHD2 Recover threshold of queue 2 RNC CONGCLRTHD3 Recover threshold of queue 3 RNC CONGCLRTHD4 Recover threshold of queue 4 RNC CONGCLRTHD5 Recover threshold of queue 5 RNC CONGTHD0 Congestion threshold of queue 0 RNC CONGTHD1 Congestion threshold of queue 1 RNC CONGTHD2 Congestion threshold of queue 2 RNC CONGTHD3 Congestion threshold of queue 3 RNC CONGTHD4 Congestion threshold of queue 4 RNC CONGTHD5 Congestion threshold of queue 5 RNC ConnCellBarred Cell barred indicator for SIB4 RNC ConnectFailRrcRedirSwitc RRC redirect switch RNC ConnIntraFreqReselection Intra-freq cell reselection ind f RNC CONNPWR Is connecting power monitor RNC

ConnQhyst1s Hysteresis 1 for connect mode RNC

ConnQhyst2s Hysteresis 2 for connect mode RNC

ConnQoffset1sn ConnQoffset1sn RNC

ConnQoffset2sn ConnQoffset2sn RNC ConnSintersearch Inter-freq cell reselection thre RNC ConnSintrasearch Intra-freq cell reselection thre RNC ConnTbarred Time barred for SIB4 RNC Constantvalue Constant value for calculating i RNC CONTEXTTYPE Context Type RNC CONTPING Continue ping or not RNC ConverDlMBR Downlink maximum bit rate of RNC ConverUlMBR Uplink maximum bit rate of Con RNC CONVGBR Conversational MAC-c flow G RNC CONVMBR Conversational MAC-c flow M RNC

CopperMaxMode Max Mode Of Wideband AMRC RNC

CopperMaxMode Max Mode Of Narrowband AMR RNC COUNT Send PKT Count RNC CountCThreshold Count-C threshold RNC CounterCheckSwitch Counter check switch RNC

CP1SupInd CP1 support indicator RNC CqiDtxTimer CQI Activity Timer RNC CQIFbCkinInDTXDRXmo CQI Feedback Cycke in DTX- RNC CRMaxNum Max number of cell reselection RNC CROSSIPFLAG Cross IP address available flag RNC CSCONVDL R99 CS conversational service d RNC CSCONVPRIPATH R99 CS conversational primary RNC CSCONVPRITH R99 CS conversational pri path RNC CSCONVSECPATH R99 CS conversational secondar RNC CSCONVSECWHT R99 CS conversational pri sec pa RNC CSCONVUL R99 CS conversational service u RNC CsErlang Max User Number of CS RNC

CSHOOut2GloadThd CS domain Reloc GSM load T RNC CsInfoUpdFlag CS Information Update Switch RNC CsInfoUpdTmr CS Information Update Protecti RNC

CsNriCfgMode CS NRI configuration RNC CSNRILength Length of CS NRI in bits RNC CsRestriction Restriction for CS RNC CSServiceHOSwitch Inter-RAT CS handover switch RNC CSSTRMDL R99 CS streaming service downl RNC CSSTRMPRIPATH R99 CS streaming primary path RNC CSSTRMPRITH R99 CS streaming pri path load RNC CSSTRMSECPATH R99 CS streaming secondary pa RNC CSSTRMSECWHT R99 CS streaming pri sec path lo RNC CSSTRMUL R99 CS streaming service uplink RNC CsSwitch CS algorithm switch RNC

CSVoiceChlType CS voice channel type RNC CSVoiceHspaDlRelDelay CS Voice Hspa Dl Relative Del RNC CSVoiceHspaUlRelDelay CS Voice Hspa Ul Relative Del RNC CSVoiceHsupaTti HSUPA TTI type of CS voice tra RNC CSVoiceOverHspaSuppInd CS Voice Over Hspa Support Ind RNC

CTFC Calculated transport format com RNC

CTFCSize CTFC length of TFCS RNC CtrlPlnSharingOutOffset Control plane sharing out offset RNC CtrlPlnSharingOutThd Control plane sharing out thresh RNC CTRLSLOT Slot No. RNC CTRLSW CM control enable switch RNC CXT Cross type RNC CZ Classified Zone ID RNC

D2F2PTvmThd BE D2F/R Or F/R2P 4b Thresho RNC D2FTvmPTAT BE D2F/R 4b Pending Time RNC D2FTvmTimeToTrig BE D2F/R 4b Time RNC Dccc1APenaltyTime 1A Rate Down Penalty Time Le RNC

DcccShoPenaltyTime Period of penalty timer for SHO RNC DcccStg DCCC Strategy RNC DcccUpPenaltyLen DCCC Rate Up Fail Penalty Ti RNC

DchThrouMeasPeriod DCH Throu Meas Period RNC DchThrouPendingTime4B Period Amount after trigger 4B RNC DchThrouTimetoTrigger4B Period Amount to trigger 4B o RNC DEBUGSUBNET Debugging Subnet No. RNC DefaultCnOp Default CnOperator RNC DefaultConstantValue Constant value configured by de RNC DefPcpichEcNo Default PCPICH Ec/No RNC DELAY Max diff delay RNC Delay Delay Time Length RNC DelayClass Delay Class RNC DelayClass Delay Class RNC DeltaCodeOccupiedRate Delta code occupied rate RNC

DeltaQrxlevmin Delta Min Rx level RNC

DENO Destination entity No. RNC DESTIP Destination IP address RNC DESTIP Destination IP address RNC

DESTMEPID RMEP ID RNC DGPSPERIOD DGPS data report period RNC

Direction Direction RNC DivCtrlField Softer handover combination ind RNC DlAmrConvAF DL AF of R99 AMR conv servi RNC

DlAmrTrigTimeE Amr Trigger Time Of Event E RNC DlBackgroundAF DL AF of R99 background servi RNC

DlBasicCommMeasFilterCo DL basic common measure filter RNC DlBeH2DInitialRate DL rate of HSDPA BE traffic a RNC

DlBeTraffDecThs DL BE traffic DCH decision thr RNC DlBeTraffInitBitrate DL BE traffic Initial bit rate RNC DlBeTraffThsOnHsdpa DL BE traffic threshold on HS RNC

DlBeTrigTimeE Be Trigger Time Of Event E RNC

DlBeTrigTimeF Be Trigger Time Of Event F RNC

DlCacAvgFilterLen DL CAC moving average filter l RNC DlCCHLoadRsrvCoeff DL common channel load reserve RNC

DlCellTotalThd DL total power threshold RNC DlCmMethod Downlink Compression Method RNC

DLCODENO Reserved DL code No RNC

DlConvAMRThd DL threshold of Conv AMR serv RNC

DlConvNonAMRThd DL threshold of Conv non_AMR RNC

DlCSInterRatShouldBeH DL CS should be HO user numb RNC

DlCSInterRatShouldNot DL CS should not be HO user n RNC

DlDcccRateThd Downlink Bit Rate Threshold RNC

DlFullCvrRate Downlink Full Coverage Bit Rat RNC DlGBR Downlink GBR for BE service RNC

DlHoCeCodeResvSf DL handover credit and code re RNC

DlHOThd DL handover access threshold RNC DlHSUPARsvdFactor DL HSUPA reserved factor RNC DlInteractAF DL AF of R99 interactive servic RNC DlInterFreqHoBWThd DL HO maximum bandwidth RNC DlInterFreqHoCellLoadSp DL HO load space threshold RNC DlLdrAMRRateReduction DL LDR-AMR rate reduction RNC

DlLdrAvgFilterLen DL LDR moving average filter l RNC

DlLdrBERateReductionR DL LDR-BE rate reduction RA RNC

DlLdrCreditSfResThd DL LDR credit SF reserved thre RNC DlLdrEighthAction DL LDR eighth action RNC

DlLdrFifthAction DL LDR fifth action RNC

DlLdrFirstAction DL LDR first action RNC

DlLdrFourthAction DL LDR fourth action RNC DlLdrNinthAction DL LDR ninth action RNC

DlLdrPsRTQosRenegRab DL LDR un-ctrl RT Qos re-ne RNC

DlLdrRelThd DL LDR release threshold RNC

DlLdrSecondAction DL LDR second action RNC DlLdrSeventhAction DL LDR seventh action RNC

DlLdrSixthAction DL LDR sixth action RNC DlLdrTenthAction DL LDR tenth action RNC

DlLdrThirdAction DL LDR third action RNC DlLdrTrigThd DL LDR trigger threshold RNC DlLdTrnsHysTime DL State Trans Hysteresis thres RNC DlMaxNumOfTfc Downlink Maximum Number of RNC DlMBMSRsvdFactor DL MBMS reserved factor RNC

DlMeasFilterCoef DL TCP Measurement Filter Coe RNC DlMidRateCalc Downlink Mid Bit Rate Calcula RNC

DlMidRateThd Downlink Mid Bit Rate Thresho RNC

DlModeChangeTimerLen DL Mode Change Waiting Time RNC DlNonAmrConvAF DL AF of R99 non AMR conv se RNC

DlOlcAvgFilterLen DL OLC moving average filter l RNC

DlOlcFTFRstrctRabNum DL OLC fast TF restrict RAB n RNC

DlOlcFTFRstrctTimes DL OLC fast TF restrict times RNC

DlOlcMeasFilterCoeff DL overload measure filter coef RNC

DlOlcRelThd DL OLC release threshold RNC DlOlcTraffRelRabNum DL OLC traff release RAB num RNC

DlOlcTrigHyst DL OLC trigger hysteresis RNC

DlOlcTrigThd DL OLC trigger threshold RNC

DlOtherThd DL threshold of other services RNC

DLOVSFSF Reserved DL code OVSF RNC

DlPSInterRatShouldBeH DL PS should be HO user numb RNC

DlPSInterRatShouldNot DL PS should not be HO user n RNC DlQosAmrAdjSwitch Switch Of AMR Downlink Rate RNC DlQosAmrInterFreqHoSwit InterFreq HO Switch For Down RNC DlQosAmrInterRatHoSwit InterRat HO Switch For Downl RNC

DLQosMcTimerLen Down Link Qos Measure timer l RNC DlQosVpInterFreqHoSwitc InterFreq HO Switch For Downl RNC DlQosWAmrAdjSwitch Switch For WAMR Downlink R RNC DlQosWAmrInterFreqHoSw InterFreq HO Switch For WAM RNC DlQosWAmrInterRatHoSwi InterRat HO Switch For WAMR RNC DlR99CongCtrlSwitch DL R99 Congestion Control Swi RNC DlRateDnAdjLevel Downlink Rate Decrease Adjust RNC DlRateUpAdjLevel Downlink Rate Increase Adjust RNC

DlRscpQosHyst Down Link RSCP Used-Freq T RNC DlSF Downlink spreading factor RNC

DlSFLimitCMInd Dl SF limit CM ind RNC

DlSFTurnPoint DL SF threshold RNC DlSrbActFactor DL AF of SRB RNC DlStreamAF DL AF of R99 Streaming servic RNC DlStrThsOnHsdpa DL streaming traffic threshold RNC

DlThdE1 DL E1 Event Relative Threshol RNC

DlThdE2 DL E2 Event Relative Threshol RNC

DlThdF1 DL F1 Event Relative Threshold RNC

DlThdF2 DL F2 Event Relative Threshold RNC DlTotalEqUserNum DL total equivalent user number RNC

DlVpTrigTimeE Vp Trigger Time Of Event E RNC DLYGB Expected diff delay guard-band RNC DomainType Blocked domain type RNC DOOR_ENGINE_MASK Enable Door Status Alarm Repor RNC DPC DSP code RNC DpcchBurst1 DPCCH Transmission Burst 1 RNC DpcchBurst2 DPCCH Transmission Burst 2 RNC DpcchSlotFmtForHspa prefered DPCCH slot format fo RNC DPCDNF DSP code RNC

DpchDivModforMIMO DPCH diversity mode for MIMO RNC

DpchPrioTxDiversityMode DPCH priority Tx diversity mod RNC DpcMode DL power control mode RNC DPCT DSP type RNC DPORTNO Dst Port NO. RNC

DPUSN DPUb Slot No. RNC

DPX DSP index RNC DR Activation direction RNC

DraSwitch Dynamic resource allocation swi RNC

DRDEcN0Threshhold Drd Ec/N0 threshold RNC DrlAal2EstIndTmr DRL AAL2 establishment indica RNC DrlRecfgCmitTmr DRL reconfiguration commit ti RNC

DRMaxGSMNum Max inter-RAT direct retry num RNC DrncBeDlRlcQosSwitch Drnc Parameter for BE Downl RNC DROPPKTTHD0 Packet discard threshold of queu RNC DROPPKTTHD1 Packet discard threshold of queu RNC DROPPKTTHD2 Packet discard threshold of queu RNC DROPPKTTHD3 Packet discard threshold of queu RNC DROPPKTTHD4 Packet discard threshold of queu RNC DROPPKTTHD5 Packet discard threshold of queu RNC DrSwitch Direct retry switch RNC DrxCycle DRX Cycle RNC DRXCycleLenCoef DRX cycle length coefficient RNC

DrxCycleLenCoef Paging DRX cycle coefficient RNC DrxGrantMonitoring UE DRX Grant Monitoring Deci RNC Drxvalid DRX Parameter Switch RNC

DS1 E1T1 port No. RNC DsacAutoSwitch Switch for auto DSAC RNC

DSCP Differentiated services code poi RNC DSPNO Dsp No. RNC DST DaylightSave RNC DSTE1T1LNKN Destination link No. RNC

DSTIP Destination IP address RNC DSTIP Destination IP RNC DSTMASK Destination address mask RNC DSTMASK Destination address mask RNC DSTTSN Destination time slot No. RNC DtxCycle1 DPCCH Transmission Cycle 1 RNC DtxCycle2 DPCCH Transmission Cycle 2 RNC DtxDrxEnablingDelay delay time of DTX_DRX in acti RNC DtxLongPreamble Long DPCCH Preamble RNC Dtxvalid DTX Parameter Switch RNC DUPLEX Duplex Mode RNC

DynCellOpenJudgeTimerle Period Timer Length For Cell RNC DynCellShutdownProtectTi Protect Timer Length For Cell RNC DynCellShutDownSwitch Cell Dynamic ShutDown Switc RNC DynShutdownSwitch Cell Dynamic ShutDown Switch RNC DynShutDownType Cell Dynamic ShutDown Type RNC E1T1LNKN Bearing link No. RNC E2FThrouMeasPeriod E-DCH Throu Meas Period RNC E2FThrouPTAT E-DCH2F 4b Pending Period A RNC E2FThrouThd E-DCH2F 4b Threshold RNC E2FThrouTimeToTrig E-DCH2F 4b Period Amount RNC EagchCodeNum Code Number for E-AGCH RNC ECHOIP Check IP address RNC EcN0AdjStep Ec/N0 Adjustment Step RNC EcN0AdjTimerLen Ec/N0 Adjustment Measurement RNC

EcN0EffectTime Ec/N0 effective time RNC EcN0MaxDownAdjStep Maximum Ec/N0 Down Step RNC EcN0MaxUpAdjStep Maximum Ec/N0 Up Step RNC

EcN0Ths Ec/N0 threshold RNC EDAY End date RNC EdchMacdPduSize1 E-DCH MAC-D PDU size1 RNC EdchMacdPduSize10 E-DCH MAC-D PDU size10 RNC EdchMacdPduSize11 E-DCH MAC-D PDU size11 RNC EdchMacdPduSize12 E-DCH MAC-D PDU size12 RNC EdchMacdPduSize2 E-DCH MAC-D PDU size2 RNC EdchMacdPduSize3 E-DCH MAC-D PDU size3 RNC EdchMacdPduSize4 E-DCH MAC-D PDU size4 RNC EdchMacdPduSize5 E-DCH MAC-D PDU size5 RNC EdchMacdPduSize6 E-DCH MAC-D PDU size6 RNC EdchMacdPduSize7 E-DCH MAC-D PDU size7 RNC EdchMacdPduSize8 E-DCH MAC-D PDU size8 RNC EdchMacdPduSize9 E-DCH MAC-D PDU size9 RNC EdchMacdPduSizeNum The Number of E-DCH MAC-D RNC EdchPendingTime4A Period Amount after trigger 4 RNC EdchPendingTime4B Period Amount after trigger 4 RNC EdchRateAdjustSet HSUPA UpLink Rate Adjust Set RNC EdchSirMaxDownStep Maximum E-DCH SIR decrease RNC

EdchTargetLargeRetransN Edch Target Large Number of RNC

EdchTargetLittleRetransN Edch Little Target Number of RNC EdchTimetoTrigger4A Period Amount to trigger 4A o RNC EdchTimetoTrigger4B Period Amount to trigger 4B o RNC EdchTtiType Edch TTI type RNC EFACHDL EFACH channel forward factor RNC EFACHDTCHGBP EFACH DTCH GBP RNC EFachSupInd EFachSupInd RNC EFachSwitch switch for RRC established on RNC EHSPACMPermissionInd CM permission ind on HSPA+ RNC EM EndType RNC EmcPreeRefVulnSwitch Preemptvulnerability for Emerge RNC EMERGENCY Emergency verification RNC EmergLCSSwitch Emergency LCS Switch RNC EMONTH End month RNC EMSIP EMS IP Address RNC

EncryptionAlgo Encryption algorithm RNC EndTime1 First Cell Dynamic ShutDown I RNC EndTime2 Second Cell Dynamic ShutDown RNC EndTime3 Third Cell Dynamic ShutDown I RNC

ENTITYT Destination entity type RNC ERFAMEventPara Err Frmae Event Para RNC ERFAMEventPrid Err Frmae Event Prid RNC ERFAMPRDEventPara Err Frmae Cyc Event Para RNC ERFAMPRDEventPrid Err Frmae Cyc Event Prid RNC ERFAMSCDEventPara Err Frmae Sec Event Para RNC ERFAMSCDEventPrid Err Frmae Sec Event Prid RNC ErgchEhichCodeNum Code Number for E-RGCH/E-H RNC ESTINDTMR Establishment indication timer RNC ESTREQTMR Establishment request timer RNC ET EndTime RNC Event4aThd Traffic Measurement Event 4A t RNC Event4bThd Traffic Measurement Event 4B t RNC EventAReportDelay Event A report delay RNC EventAThred Event A threshold RNC EventBThred Event B threshold RNC EWEEK End week RNC EWSEQ End week sequence RNC EX_ANO1_SIG_MAX Upper Limit of Signal Output of RNC EX_ANO1_SIG_MIN Lower Limit of Signal Output o RNC EX_ANO1_TYPE Sensor Type of External Analog RNC EX_ANO1_VAL_MAX Upper Limit of Measurement Ra RNC EX_ANO1_VAL_MIN Lower Limit of Measurement Ra RNC EX_ANO2_SIG_MAX Upper Limit of Signal Output of RNC EX_ANO2_SIG_MIN Lower Limit of Signal Output o RNC EX_ANO2_TYPE Sensor Type of External Analog RNC EX_ANO2_VAL_MAX Upper Limit of Measurement Ra RNC EX_ANO2_VAL_MIN Lower Limit of Measurement Ra RNC EX_ANO3_SIG_MAX Upper Limit of Signal Output of RNC EX_ANO3_SIG_MIN Lower Limit of Signal Output o RNC EX_ANO3_TYPE Sensor Type of External Analog RNC EX_ANO3_VAL_MAX Upper Limit of Measurement Ra RNC EX_ANO3_VAL_MIN Lower Limit of Measurement Ra RNC EX_ANO4_SIG_MAX Upper Limit of Signal Output of RNC EX_ANO4_SIG_MIN Lower Limit of Signal Output o RNC EX_ANO4_TYPE Sensor Type of External Analog RNC EX_ANO4_VAL_MAX Upper Limit of Measurement Ra RNC EX_ANO4_VAL_MIN Lower Limit of Measurement Ra RNC F2PTvmPTAT BE F2P 4b Pending Time RNC F2PTvmTimeToTrig BE F2P 4b Time RNC FachId FACH ID RNC

FachIdforMcch FACH ID for MCCH RNC

FachMaxPower Fach Max Power RNC FACHMeasInd FACH Meas Indicator RNC FACHPwrReduceValue FACH power reduce value RNC FACTOR Factor RNC FACTOR SPI Factor RNC FailTimeTh DCCC Rate Up Fail Time Thres RNC FC Flow Control RNC

FCINDEX Flow control parameter index RNC

FCSTYPE CRC check mode RNC FddTpcDlStepSize FDD DL power control step size RNC

FdpchDivModforMIMO F-DPCH diversity mode for MI RNC

FdpchDivModforNonMIM F-DPCH diversity mode for no RNC FdpchMaxRefPwr FDPCH maximum reference po RNC FdpchMinRefPwr FDPCH minimum reference pow RNC FdpchPO2 F-DPCH Power Offset RNC FEDHCPSVRIP FE Dhcp Server IP RNC

FILENAME Export file name RNC FILEPATH Export file path RNC

FilterCoef Intra-freq meas L3 filter coeff RNC

FilterCoefOf2D2F 2D2F filter coeff RNC FixedMachsWinSize Fixed MAC-hs window size RNC FlcAlgoSwitch Flc Algo Switch RNC

FLOWCTRLSWITCH Flow control switch RNC FLOWID Flow ID RNC FN File Name RNC FN File Name RNC ForcedSHOSwitch ForcedSho Switch In CELLID RNC FPMUXSWITCH FPMUX flag RNC FPTIMER FPTIMER RNC FRAGSIZE MP flake size RNC

FRALNKN Fractional link No. RNC FRALNKT Fractional link type RNC FRMLEN TX frame length RNC FTI Factor table index RNC FTI Factor table index RNC FUNCTIONSWITCH1 Function Switch1 RNC FUNCTIONSWITCH2 Function Switch2 RNC FUNCTIONSWITCH3 Function Switch3 RNC FUNCTIONSWITCH4 Function Switch4 RNC

FWDCONGBW Forward congestion threshold RNC FWDCONGBW Forward congestion threshold RNC FWDCONGBW Forward congestion threshold RNC FWDCONGBW Forward congestion threshold RNC FWDCONGBW Forward congestion threshold RNC

FWDCONGCLRBW Forward congestion clear thresh RNC

FWDCONGCLRBW Forward congestion clear thresh RNC FWDCONGCLRBW Forward congestion clear thresh RNC FWDCONGCLRBW Forward congestion clear thresh RNC FWDCONGCLRBW Forward congestion clear thresh RNC FWDCONGCLRBW Forward congestion clear thresh RNC

FWDHORSVBW Forward handover reserved ban RNC FWDHORSVBW Forward handover reserved ban RNC FWDHORSVBW Forward handover reserved ban RNC FWDHORSVBW Forward handover reserved ban RNC FWDHORSVBW Forward handover reserved ban RNC GainFactorBetaC Gain Factor BetaC RNC GainFactorBetaD Gain Factor BetaD RNC GATEWAY Check IP address RNC

GCDF GCDF RNC GCDF Geo-coordinate data format RNC GENCCHDL General common channel service RNC GENCCHUL General common channel service RNC

GoldMaxMode Max Mode Of Wideband AMRC RNC

GoldMaxMode Max Mode Of Narrowband AMR RNC GoldUserLoadControlSwit Gold user load control switch RNC GPSPERIOD GPS data report period RNC GRPID Transport Resource Group No. RNC GRPT Transport Resource Group Type RNC

GSMCellIndex GSM cell index RNC GSMCellName GSM cell name RNC HangBlockNum5A Interval Block Number RNC HappyBR Happy bit rate RNC HarqPreaCap HARQ Preamble capability indic RNC HBDelaycnd Happy bit delay time RNC HBINTER Heartbeat interval RNC

HCARRYT High bearing type RNC HCodeAdjPunshTimerLeng Punish Timer Length for Code RNC

HCSPrio HCS priority level RNC HDBKGDL HSDPA background service down RNC HDBKGPRIPATH HSDPA background primary pat RNC HDBKGPRITH HSDPA background pri path loa RNC HDBKGSECPATH HSDPA background secondary p RNC HDBKGSECWHT HSDPA background pri sec path RNC HDCONVDL HSDPA conversational service d RNC HDCONVPRIPATH HSDPA conversational primary RNC HDCONVPRITH HSDPA conversational pri path RNC HDCONVSECPATH HSDPA conversational secondar RNC HDCONVSECWHT HSDPA conversational pri sec pa RNC HDHIGHINTERACTPRIT HSDPA high interactive pri path RNC HDHIGHINTERACTSEC HSDPA high pri sec path load ra RNC

HDINTERDL HSDPA interactive service down RNC HDINTHGHPRIPATH HSDPA high PRI interactive pri RNC HDINTHGHSECPATH HSDPA high PRI interactive sec RNC HDINTLOWPRIPATH HSDPA low PRI interactive pri RNC HDINTLOWSECPATH HSDPA low PRI interactive sec RNC HDINTMIDPRIPATH HSDPA middle PRI interactive RNC HDINTMIDSECPATH HSDPA middle PRI interactive RNC HDLOWINTERACTPRIT HSDPA low interactive pri path RNC HDLOWINTERACTSEC HSDPA low interactive pri sec pa RNC HDMIDINTERACTPRITH HSDPA mid interactive pri path RNC HDMIDINTERACTSECW HSDPA mid interactive pri sec p RNC HDSIPDL HSDPA IMS signal downlink fa RNC HDSIPPRIPATH HSDPA IMS Signal primary pat RNC HDSIPPRITH HSDPA IMS Signal pri path load RNC HDSIPSECPATH HSDPA Signal secondary path RNC HDSIPSECWHT HSDPA IMS Signal pri sec path l RNC HDSRBDL HSDPA signal downlink factor RNC HDSRBPRIPATH HSDPA Signal primary path RNC HDSRBPRITH HSDPA Signal pri path load thr RNC HDSRBSECPATH HSDPA Signal secondary path RNC HDSRBSECWHT HSDPA Signal pri sec path load RNC HDSTRMDL HSDPA streaming service downl RNC HDSTRMPRIPATH HSDPA streaming primary path RNC HDSTRMPRITH HSDPA streaming pri path load RNC HDSTRMSECPATH HSDPA streaming secondary pa RNC HDSTRMSECWHT HSDPA streaming pri sec path lo RNC HDVOICEDL HSDPA voice service downlink RNC HDVOICEPRIPATH HSDPA Voice primary path RNC HDVOICESECPATH HSDPA Voice secondary path RNC HFRAATMLNKN High FRAATM link No. RNC HhoRelocProcSwitch Relocation with HHO process sw RNC HHOTRIG HHO cross IUR trigger RNC HIMAGRPN High IMA group No. RNC HoAsuTmr HO active set update response t RNC HoCellUpdateRspTmr HO cell update response timer RNC

HOCovPrio The priority of coverage based RNC HoPagingRspTmr HO paging response timer RNC HoPhychRecfgTmr HO PhyCh reconfiguration time RNC HoRelocReqTmr HO relocation request timer RNC HostType NodeB Host Type RNC

HoSwitch HandOver switch RNC HOThdEcN0 Inter-freq measure target frequ RNC HOThdRscp Inter-freq measure target freq RNC HoWtTrchRecfgRspTmr HO wait timer for TrCH or RB r RNC HPN High NCOPT port No. RNC HsdpaBackGroundAF AF of hsdpa background service RNC HsdpaBePBRThd HSDPA best effort PBR thresho RNC HsdpaCMPermissionInd CM permission ind on HSDPA RNC HsdpaConvAF AF of hsdpa conv service RNC HsdpaInteractAF AF of hsdpa interactive service RNC

HsdpaNeedPwrFilterLen HSDPA need power filter len RNC

HsdpaPrvidBitRateFilterLe HSDPA bit rate filter len RNC HsdpaRabEstAttMinNum The minimum of HSDPA Rab att RNC HsdpaRabEstSuccRatioThd HSDPA Rab successful setup rat RNC HsdpaStreamAF AF of hsdpa streaming service RNC HsdpaStrmPBRThd HSDPA streaming PBR threshol RNC HSDPAthroughput Max throughput of HSDPA RNC HsdpaUserNumThd Cell Dynamic ShutDown Hsdpa RNC

HsdschMacdPduSize1 HS-DSCH MAC-D PDU size1 RNC HsdschMacdPduSize2 HS-DSCH MAC-D PDU size2 RNC HsdschMacdPduSize3 HS-DSCH MAC-D PDU size3 RNC HsdschMacdPduSize4 HS-DSCH MAC-D PDU size4 RNC HsdschMacdPduSize5 HS-DSCH MAC-D PDU size5 RNC HsdschMacdPduSize6 HS-DSCH MAC-D PDU size6 RNC HsdschMacdPduSize7 HS-DSCH MAC-D PDU size7 RNC HsdschMacdPduSize8 HS-DSCH MAC-D PDU size8 RNC HsdschMacdPduSizeNum The Number of HS-DSCH MAC RNC HSN High slot No. RNC HspaEnhSwitch Cell Hspa Enhanced function sw RNC HSPAPlusSelection prefered HSPA PLUS character RNC HspaPlusSwitch Cell Hspa Plus function switch RNC HspaPower The Offset of HSPA Total Powe RNC HspaTimerLen HSPA hysteresis timer length RNC HspdcchSecondCodeSupp1 Support second code Flag for T RNC HspdcchSecondCodeSupp2 Support second code Flag for T RNC HspdcchSecondCodeSupp3 Support second code Flag for T RNC HspdcchSecondCodeSupp4 Support second code Flag for T RNC HsPdschCodeNum Code Number for HS-PDSCH RNC

HsPdschMaxCodeNum Code Max Number for HS-PDS RNC

HsPdschMinCodeNum Code Min Number for HS-PDS RNC HsPdschMPOConstEnum HS-PDSCH MPO Constant RNC

HspdschPrioTxDiversityM Hspdsch priority Tx diversity m RNC HSRN High subrack No. RNC HsScchCodeNum Code Number for HS-SCCH RNC Hsupa10msSchPrdForGran HSUPA TTI 10ms schedule perio RNC Hsupa10msSchPrdForNonG HSUPA TTI 10ms schedule perio RNC Hsupa2msSchPrdForGrant HSUPA TTI 2ms schedule period RNC Hsupa2msSchPrdForNonGr HSUPA TTI 2ms schedule period RNC HsupaBackGroundAF AF of hsupa background service RNC HsupaBeShoRateThd HSUPA BE SHO THD RATE RNC HsupaCeConsumeSelection HSUPA Credit Consume Type RNC HsupaCMPermissionInd CM permission ind on HSUPA RNC HsupaConvAF AF of hsupa conv service RNC HsupaDcccStg HSUPA DCCC Strategy RNC HsupaEqualPriorityUserP Equal priority HSUPA user PBR RNC HsupaHighPriorityUserPB High priority HSUPA user PBR RNC HsupaInitialRate Initial rate of HSUPA BE traffic RNC HsupaInteractAF AF of hsupa interactive service RNC HsupaLowPriorityUserPB Low priority HSUPA user PBR t RNC HsupaPrvidBitRateFilterLe HSUPA bit rate filter len RNC HsupaRabEstAttMinNum The minimum of HSUPA Rab att RNC HsupaRabEstSuccRatioThd HSUPA Rab successful setup rat RNC

HsupaStreamAF AF of hsupa streaming service RNC HSUPAthroughput Max throughput of HSUPA RNC

HsupAuRetrnsLdRelThd HSUPA auto retransmit load rele RNC

HsupAuRetrnsLdTrigThd HSUPA auto retransmit load trig RNC HsupaUserNumThd Cell Dynamic ShutDown Hsupa RNC HUBKGPRIPATH HSUPA background primary pat RNC HUBKGPRITH HSUPA background pri path loa RNC HUBKGSECPATH HSUPA background secondary p RNC HUBKGSECWHT HSUPA background pri sec path RNC HUBKGUL HSUPA background service upli RNC HUCONVPRIPATH HSUPA conversational primary RNC HUCONVPRITH HSUPA conversational pri path RNC HUCONVSECPATH HSUPA conversational secondar RNC HUCONVSECWHT HSUPA conversational pri sec pa RNC HUCONVUL HSUPA conversational service u RNC HUHIGHINTERACTPRIT HSUPA high interactive pri path RNC HUHIGHINTERACTSEC HSUPA high interactive pri sec p RNC HUINTERUL HSUPA interactive service uplin RNC HUINTHGHPRIPATH HSUPA high PRI interactive pri RNC HUINTHGHSECPATH HSUPA high PRI interactive sec RNC HUINTLOWPRIPATH HSUPA low PRI interactive pri RNC HUINTLOWSECPATH HSUPA low PRI interactive sec RNC HUINTMIDPRIPATH HSUPA middle PRI interactive RNC HUINTMIDSECPATH HSUPA middle PRI interactive RNC HULOWINTERACTPRIT HSUPA low interactive pri path RNC HULOWINTERACTSEC HSUPA low interactive pri sec pa RNC

HUM_MASK Enable Humidity Alarm Reporti RNC HUM_THD_HIGH Upper Limit of Humidity Alarm RNC HUM_THD_LOW Lower Limit of Humidity Alarm RNC HUMIDINTERACTPRITH HSUPA mid interactive pri path RNC HUMIDINTERACTSECW HSUPA mid interactive pri sec p RNC HUNILNKN High UNI link No. RNC HUSIPPRIPATH HSUPA IMS Signal primary pat RNC HUSIPPRITH HSUPA IMS Signal pri path load RNC HUSIPSECPATH HSUPA Signal secondary path RNC HUSIPSECWHT HSUPA IMS Signal pri sec path l RNC HUSIPUL HSUPA IMS signal uplink facto RNC HUSRBPRIPATH HSUPA Signal primary path RNC HUSRBPRITH HSUPA Signal pri path load thr RNC HUSRBSECPATH HSUPA Signal secondary path RNC HUSRBSECWHT HSUPA Signal pri sec path load RNC HUSRBUL HSUPA signal uplink factor RNC HUSTRMPRIPATH HSUPA streaming primary path RNC HUSTRMPRITH HSUPA streaming pri path load RNC HUSTRMSECPATH HSUPA streaming secondary pa RNC HUSTRMSECWHT HSUPA streaming pri sec path lo RNC HUSTRMUL HSUPA streaming service uplink RNC HUVOICEPRIPATH HSUPA Voice primary path RNC HUVOICESECPATH HSUPA Voice secondary path RNC HUVOICEUL HSUPA voice service uplink fac RNC HVCI High VCI RNC HVPI High VPI RNC

HystFor1A 1A hysteresis RNC

HystFor1B 1B hysteresis RNC

HystFor1C 1C hysteresis RNC

HystFor1D 1D hysteresis RNC

HystFor1F 1F hysteresis RNC

HystFor1J 1J hysteresis RNC

HystFor2B 2B hysteresis RNC

Hystfor2C 2C hysteresis RNC Hystfor2C 2C hysteresis RNC

HystFor2D 2D hysteresis RNC

HystFor2F 2F hysteresis RNC

Hystfor3A 3A hysteresis RNC

Hystfor3C 3C hysteresis RNC

HystforInterRAT Inter-RAT hysteresis RNC

HystForPrdInterFreq HHO hysteresis RNC HystForPrdInterFreq HHO hysteresis RNC IARXTMR Inactive RX timer RNC IATXTMR Inactive TX timer RNC ICMPPKGLEN ICMP packet Length RNC ID Task ID RNC IdleCellBarred Cell barred indicator for SIB3 RNC IdleIntraFreqReselection Intra-freq cell reselection ind f RNC

IdleQhyst1s Hysteresis 1 for idle mode RNC

IdleQhyst2s Hysteresis 2 for idle mode RNC

IdleQoffset1sn IdleQoffset1sn RNC

IdleQoffset2sn IdleQoffset2sn RNC IdleSintersearch Inter-freq cell reselection thres RNC IdleSintrasearch Intra-freq cell reselection thres RNC IdleTbarred Time barred for SIB3 RNC

IDLETMR Timer_Idle RNC IFAntiPingpangTimerLeng The timer length of anti pingp RNC IgorTmr TigOR RNC

IMAGRPN IMA group No. RNC IMAID IMA ID RNC

IMALNKN IMA link No. RNC IMAVER IMA protocol version RNC ImsBearEnhancedSwitch IMS Bear enhanced switch RNC ImsChlType IMS channel type RNC IMSGBR IMS MAC-c flow GBR RNC IMSI IMSI ID RNC ImsiMax The end of IMSI RNC ImsiMin The start of IMSI RNC ImsInitialAccessRate IMS initial rate RNC ImsiRtMax Maximum of IMSI route parame RNC ImsiRtMin Minimum of IMSI route parame RNC IMSMBR IMS MAC-c flow MBR RNC

InactThsForCycle2 Threshold For DPCCH Transmis RNC InactThsForDrxCycle DRX Inactivity Threshold RNC InactThsForGrantMonitori Inactivity Threshold for UE Gra RNC INFRA_RED_MASK Enable Infrared Sensor Alarm R RNC INHT Inhibit Type RNC INHTMR Timer_NO-CREDIT RNC IntegrityProtectAlgo Integrity protection algorithm RNC INTERACTGBR Interactive MAC-c flow GBR RNC INTERACTMBR Interactive MAC-c flow MBR RNC InterFreqActiveType MBDR switch RNC InterFreqCovHOThdEcN0 Inter-freq measure target frequ RNC

InterFreqCSThd2DEcN0 Inter-freq CS measure start Ec RNC

InterFreqCSThd2DRSCP Inter-freq CS measure start R RNC

InterFreqCSThd2FEcN0 Inter-freq CS measure stop Ec RNC

InterFreqCSThd2FRSCP Inter-freq CS measure stop RS RNC InterFreqDlMbdrTrigThres DL theshold RNC

InterFreqFilterCoef Inter-frequency measure filter c RNC InterFreqFilterCoef Inter-frequency measure filter c RNC InterFreqHOSwitch Inter-freq handover type switch RNC

InterFreqHThd2DEcN0 Inter-freq H measure start Ec/ RNC

InterFreqHThd2DRSCP Inter-freq H measure start RS RNC

InterFreqHThd2FEcN0 Inter-freq H measure stop Ec/ RNC

InterFreqHThd2FRSCP Inter-freq H measure stop RSC RNC InterFreqInterRatMeasInd Inter-freq/Inter-RAT Meas Ctrl RNC InterFreqMeasQuantity Inter-freq Measure Quantity RNC

InterFreqMeasTime Inter-freq measure timer length RNC InterFreqMeasTime Inter-freq measure timer length RNC InterFreqNCellDetectSwitc Inter-Frequency Neighboring Ce RNC

InterFreqNCovHOThdEcN Inter-freq measure target frequ RNC

InterFreqR99PsThd2DEcN Inter-freq R99 PS measure star RNC

InterFreqR99PsThd2DRSC Inter-freq R99 PS measure sta RNC

InterFreqR99PsThd2FEcN Inter-freq R99 PS measure sto RNC

InterFreqR99PsThd2FRSC Inter-freq R99 PS measure sto RNC InterFreqRATSwitch Inter-freq and Inter-RAT coexist RNC

InterFreqReportMode Inter-frequency measure report RNC

InterFreqReportMode Inter-frequency measure report RNC InterFreqTreselScalingFact Inter-freqency scaling factor for RNC InterFreqUlMbdrTrigThres UL theshold RNC InterPlmnHoAllowedInterR Inter RAT Inter Plmn Ho Allow RNC InterPlmnHoAllowedIntraR Intra RAT Inter Plmn Ho Allow RNC InterRatActiveType MBDR switch RNC

InterRATCSThd2DEcN0 Inter-RAT CS measure start E RNC

InterRATCSThd2DRSCP Inter-RAT CS measure start R RNC

InterRATCSThd2FEcN0 Inter-RAT CS measure stop Ec RNC

InterRATCSThd2FRSCP Inter-RAT CS measure stop R RNC InterRatDlMbdrTrigThresh DL theshold RNC

InterRATFilterCoef Inter-RAT filter coeff RNC

InterRATFilterCoef Inter-RAT filter coeff RNC

InterRATHOAttempts Inter-RAT handover max attemp RNC InterRatHOPermit Emergency LCS Inter-Rat Hando RNC

InterRATHOThd Inter-RAT CS handover decisi RNC InterRatHOType Inter-Rat Handover Type RNC

InterRATHThd2DEcN0 Inter-RAT H measure start Ec/ RNC

InterRATHThd2DRSCP Inter-RAT H measure start RS RNC

InterRATHThd2FEcN0 Inter-RAT H measure stop Ec/ RNC

InterRATHThd2FRSCP Inter-RAT H measure stop RS RNC

InterRATMeasTime Inter-RAT measure timer length RNC

InterRATMeasTime Inter-RAT measure timer length RNC InterRatNCellDetectSwitch Inter-Rat Neighboring Cell Dete RNC

InterRATNCovHOCSThd Inter-RAT CS handover decisi RNC

InterRATNCovHOPSThd Inter-RAT PS handover decisi RNC

InterRATPeriodReportInter Inter-RAT period report interval RNC

InterRATPeriodReportInter Inter-RAT period report interval RNC InterRatPhyChFailNum Inter-RAT HO physical channel RNC InterRatPhyChFailNum Inter-RAT HO physical channel RNC InterRatPhyChFailNum Inter-RAT HO physical channel RNC InterRatPhyChFailNum Inter-RAT HO physical channel RNC

InterRATPingPongHyst Inter-RAT PingPong Hyst RNC

InterRATPingPongTimer Inter-RAT PingPong timer RNC

InterRATR99PsThd2DEcN Inter-RAT R99 PS measure sta RNC

InterRATR99PsThd2DRSC Inter-RAT R99 PS measure sta RNC

InterRATR99PsThd2FEcN Inter-RAT R99 PS measure sto RNC

InterRATR99PsThd2FRSC Inter-RAT R99 PS measure st RNC

InterRatReportMode Inter-RAT report mode RNC

InterRatReportMode Inter-RAT report mode RNC InterRatTreselScalingFacto Inter-RAT scaling factor for res RNC InterRatUlMbdrTrigThresh UL theshold RNC INTERVAL Send PKT Interval RNC

IntraAblThdFor1FEcNo 1F event absolute EcNo threshol RNC

IntraAblThdFor1FRSCP 1F event absolute RSCP thresho RNC

IntraFreqFilterCoef Intra-freq meas L3 filter coeff RNC

IntraFreqLdbPeriodTimerL Intra-frequency LDB period time RNC IntraFreqMeasInd Intra-freq Meas Ctrl Info Ind RNC

IntraFreqMeasQuantity Intra-freq Measure Quantity RNC IntraFreqNCellDetectSwitc Intra-Frequency Neighboring Ce RNC IntraRelThdFor1A 1A Event Relative Threshold RNC

IntraRelThdFor1ACSNVP CS non VP service 1A event rel RNC

IntraRelThdFor1ACSVP VP service 1A event relative T RNC

IntraRelThdFor1APS PS service 1A event relative thr RNC IntraRelThdFor1B 1B Event Relative Threshold RNC

IntraRelThdFor1BCSNVP CS non VP service 1B event rel RNC

IntraRelThdFor1BCSVP VP service 1B event relative T RNC

IntraRelThdFor1BPS PS service 1B event relative thr RNC IntrTmr TinTR RNC IPADDR IP address RNC

IPADDR Local IP address RNC IPADDR Next Hop IP Address RNC IPADDR Local IP address RNC IPADDR Local IP address RNC IPHC Head compress RNC IPHC Head compress RNC IPINDEX IP address index RNC

IPINDEX IP address index RNC IPLOGPORTFLAG Whether Binding logical port or RNC IPLPN Logic port No. RNC IPSN NodeB IP_TRANS Slot No. RNC IPSRN NodeB IP_TRANS Subrack No. RNC IPTRANSAPARTIND IP Trans Apart Ind RNC IPTYPE IP address type RNC

IPTYPE IP address type RNC IsAccessClass0Barred Access class 0 barred indicator RNC IsAccessClass10Barred Access class 10 barred indicator RNC IsAccessClass11Barred Access class 11 barred indicator RNC IsAccessClass12Barred Access class 12 barred indicator RNC IsAccessClass13Barred Access class 13 barred indicator RNC IsAccessClass14Barred Access class 14 barred indicator RNC IsAccessClass15Barred Access class 15 barred indicator RNC IsAccessClass1Barred Access class 1 barred indicator RNC IsAccessClass2Barred Access class 2 barred indicator RNC IsAccessClass3Barred Access class 3 barred indicator RNC IsAccessClass4Barred Access class 4 barred indicator RNC IsAccessClass5Barred Access class 5 barred indicator RNC IsAccessClass6Barred Access class 6 barred indicator RNC IsAccessClass7Barred Access class 7 barred indicator RNC IsAccessClass8Barred Access class 8 barred indicator RNC IsAccessClass9Barred Access class 9 barred indicator RNC ISCARRYMASTERFLG Carry port master flag or not RNC ISFIRSTCLASS Is First Class Transport Resour RNC

IsFixedMachsWinSize Is MAC-hs window size fixed or RNC

ISPRIMARYPLMN Primary Operator Flag RNC ISQOSPATH IS QOSPATH RNC IsROOTNODE Is Root Node RNC ITFT Interface Type RNC

ITFT Interface Type RNC IuAcIntervalOfCell AC Restriction Interval of Cell RNC IubDlOlcRelRabNum DL OLC released RAB number RNC IubUlOlcRelRabNum UL OLC released RAB number RNC IuCSRelNoRABTmr Iu CS Release protection timer RNC IuPSRelNoRABTmr Iu PS Release protection timer RNC IurCongCtrlSuppInd Congestion Control Indicator RNC IurExistInd IUR Interface Existing Indicatio RNC IurHsdpaSuppInd Hsdpa cap ind over IUR for N RNC IurHsupaSuppInd Hsupa cap ind over IUR for N RNC IUSIGCONNID IU signalling Id RNC J0RXT J0 expected incept type RNC J0RXVALUE J0 expected incept value RNC J0TXT J0 transmit type RNC J0TXVALUE J0 transmit value RNC J1RXT J1 expected incept type RNC J1RXVALUE J1 expected incept value RNC J1TXT J1 transmit type RNC J1TXVALUE J1 transmit value RNC

J2RXT J2 hope incept type RNC

J2RXVALUE J2 hope incept value RNC

J2TXT J2 transmit type RNC

J2TXVALUE J2 transmit value RNC K2MODE K2 Mode RNC

KEEPTMR Timer_Keep-Alive RNC KEYCHK Key detect or not RNC KpiAlarmChkTimes the Period of KPI Alarm Check RNC KpiAlarmSwitch RNC Report KPI Alarm Switch RNC

LAC Location area code RNC LATITUDE GPS antenna latitude RNC LATITUDESEC GPS antenna latitude RNC LATPRD Delay measure period RNC LATSUSTM Delay adjust suspend period RNC LATTH Rate down threshold for delay RNC LATUDK average delay down filter manti RNC LATUPK average delay up filter mantissa RNC LCARRYT Low bearing type RNC

LdbAvgFilterLen LDB moving average filter leng RNC

LdbDRDchoice Load balance DRD choice RNC

LdbDRDLoadRemainThd Dl load balance DRD power rem RNC

LdbDRDLoadRemainThd Dl load balance DRD power rem RNC LdbDRDOffsetDCH Load balance DRD offset for D RNC LdbDRDOffsetHSDPA Load balance DRD offset for RNC

LdbDRDSwitchDCH Load balance DRD switch for RNC

LdbDRDSwitchHSDPA Load balance DRD switch for RNC LdbDRDTotalPwrProThd Load balance DRD total power p RNC

LdcSwitch load control algorithm switch RNC LdrCodePriUseInd LDR code priority indicator RNC LdrCodeUsedSpaceThd InterFreq HO code used ratio sp RNC LdrFirstPri first priority for load reshuffling RNC LdrFourthPri fourth priority for load reshuffli RNC

LdrPeriodTimerLen LDR period timer length RNC LdrSecondPri second priority for load reshuffl RNC LdrThirdPri third priority for load reshufflin RNC

LEI Path Load EQ Threshold Table RNC LEIBRZ Bronze user Load EQ index RNC LEIGLD Gold user Load EQ index RNC LEISLV Silver user Load EQ index RNC

LENO Local entity No. RNC LEVEL MD Level RNC LEVEL Alarm mask switch RNC LFRAATMLNKN Low FRAATM link No. RNC LGCAPPTYPE Logic function type RNC

LGCAPPTYPE Logic function type RNC LGCAPPTYPE Logic function type RNC LIMAGRPN Low IMA group No. RNC LimitCMDlSFThd Dl SF threshold to limit CM RNC LittleRateThd Low Activity Bit Rate Threshol RNC LL Lower Limit RNC

LNKCODE Line code RNC

LNKN Link No. RNC

LNKREDFLAG Initial bearing traffic active tag RNC

LNKSLSMASK Signalling link mask RNC LNKT Frame Structure RNC

LNKT Link type RNC

LOCALIP Local IP address RNC LOCALIP Local IP address RNC LOCALIP Local IP RNC

LoCell Local cell ID RNC LOCIP1 First local IP address RNC LOCIP2 Second local IP address RNC LOCPN Local SCTP port No. RNC LODCTRL Board start load control. RNC LOGPORTFLAG Logic Port Flag RNC LOGPORTNO Logic Port No. RNC LOGPORTSN Logic Port Slot No. RNC LONGITUDE GPS antenna longitude RNC LONGITUDESEC GPS antenna longitude RNC

LOPT Loop type RNC LOSTSUSTM Lost adjust suspend period RNC LPN Low NCOPT port No. RNC

LPN Logic port No. RNC

LPN The Logical Port Number RNC LPNSN IP Logic Port Slot No. RNC LPNTYPE Type of the logical port RNC

LS Link select RNC LSN Low slot No. RNC LSRN Low bearing subrack No. RNC LUNILNKN Low UNI link No. RNC LVCI Low VCI RNC LVPI Low VPI RNC M3UASRVPN M3UA service listening port No RNC MaccPageRepeatTimes Number of page re-TX RNC MacDtxCycle MAC Transmission Cycle RNC MacInactiveThreshold MAC Inactivity Threshold RNC MacPduMaxSizeForEFach Cell_FACH L2 enhance max PD RNC MacPduMaxSizeForL2Enh Cell_DCH L2 enhance max PDU RNC

MAIDX MA Index RNC

MAINLINK Main link type RNC MANAME MA Name RNC

MapSwitch Service mapping strategy switch RNC MASK SRNTI Mask RNC MASK Subnet mask RNC MASK Subnet mask RNC MASK Subnet mask RNC MASK Subnet mask RNC MASK Subnet mask RNC MASK Subnet mask RNC

MaxAllowedUlTxPower Max allowed UE UL TX power RNC MaxAllowedUlTxPowerIn Max allowed UE UL TX power RNC

MaxAntennaRange Cell Antenna Max Coverage RNC

MaxAntennaRangeImp Cell Antenna Max Coverage RNC MAXASSOCRETR Association max retrans RNC MaxAttNum Inter-RAT handover max attemp RNC MaxAttNum Inter-RAT handover max attemp RNC

MaxBitRate Max rate RNC

MAXBW Max bandwidth RNC

MaxCAPSLowLoad Max capability normal load RNC

MaxCAPSMidLoad Max capability middle load RNC MAXCC MaxCC RNC

MaxCellInActiveSet Max number of cell in active set RNC MaxCmchPi Max Common channel priority RNC MaxEcN0Value Maximum Ec/N0 Value RNC MaxEdchCellInActiveSet Max number of cell in EDCH act RNC MaxEdchRetransNum Maximum Number of E-DCH PDU RNC MaxEFachUserNum Maximum EFACH user number RNC MaxFachPower Max transmit power of FACH RNC MAXFRAMELEN Maximum Frame Length RNC MaxGpsSats Maximum Num Of GPS Satellit RNC MaxHsdpaUserNum Maximum HSDPA user number RNC MaxHsupaUserNum Maximum HSUPA user number RNC

MaxMeasContInvalidTime Max number of continuous inva RNC MAXMFLEN PPP mux max mux-frame length RNC MAXMFLEN PPP mux max mux-frame length RNC MaxNrOfUlDpchs Maximum codes of uplink DP RNC MAXNRP Max_NRP RNC MAXPATHRETR Path max retrans RNC MaxPCPICHPower Max transmit power of PCPICH RNC

MAXPD Max Poll Data Count RNC

MaxQueueTimeLen Max queuing time length RNC MAXSFLEN PPP mux max son-frame length RNC

MAXSFLEN PPP mux max son-frame length RNC MaxTargetUlLoadFactor Maximum Target Uplink load Fa RNC MAXTIME Maximum time for posave RNC

MaxTxPower Max transmit power of cell RNC MaxUlTxPowerforBac Max UL TX power of backgroun RNC MaxUlTxPowerforConv Max UL TX power of conversati RNC

MaxUlTxPowerforInt Max UL TX power of interactive RNC MaxUlTxPowerforStr Max UL TX power of streaming RNC MaxUserNumCodeAdj Max user number of code adjust RNC MBDRFlag The flag of the MBDR RNC MBDRFlag The flag of the MBDR RNC MBDRPrio The priority of MBDR neighbor RNC MBDRPrio The priority of MBDR neighbor RNC MBFDCHKN Check Check Index RNC MBFDLOCALIP Multi hop BFD detect local ip RNC MBFDSN Check Slot No. RNC MBFDSRN Check Subrack No. RNC MbmsAF AF of MBMS service RNC MBMSCCHDL MBMS common channel service RNC MbmsChInd Mbms Channel Indicator RNC MbmsDecPowerRabThd MBMS descend power rab thres RNC MbmsInactTmr Set mbms data check timer RNC MbmsIubSharingSwitch MBMS Iub Sharing switch RNC MbmsMCC Mobile country code RNC MbmsMNC Mobile network code RNC MbmsNCellInd MBMS neighboring cell indicat RNC MbmsOlcRelNum MBMS services number release RNC MbmsPreemptAlgoSwitch Mbms PreemptAlgoSwitch RNC MbmsPtpUlBitRate Mbms Ptp UpLink Bit Rate RNC

MbmsSaId MBMS SA ID RNC MbmsServiceId MBMS ServiceId RNC MbmsSwitch MBMS Control Switch RNC MBMSthroughput Max throughout of MBMS RNC

MbmsTransMode Mbms Transfer Mode RNC

MBS Max burst size RNC

MCC Mobile country code RNC MCC Mobile country code RNC MCCLASS MC PRI number RNC MCR Minimum cell rate RNC

MDIDX MD Index RNC MDNAME MD Name RNC

MeasQuantityOf3A 3A Measure Quantity RNC

MEPID MEP ID RNC MEPSN MEP Slot No. RNC

MEPTYPE MEP Type RNC MHF MP/MC list head option RNC MichId MICH ID RNC MichPower MICH Power RNC MichSttdInd MICH STTD Indicator RNC MINBW Min bandwidth RNC MinCmchPi Min Common channel priority RNC MinDlChCodeLen Minimum SF of downlink DPC RNC MinEcN0Value Minimum Ec/N0 Value RNC

MinForAmrE Amr Event E Reporting Period RNC

MinForBeE Be Event E Reporting Period In RNC

MinForBeF Be Event F Reporting Period In RNC

MinForDlBasicMeas DL basic meas rprt cycle RNC

MinForDlOlcMeas DL OLC meas rprt cycle RNC

MinForHsdpaPrvidRateMe HSDPA bit rate meas cycle RNC

MinForHsdpaPwrMeas HSDPA need pwr meas cycle RNC MinForHsupaPrvidRateMe HSUPA bit rate meas cycle RNC

MinForUlBasicMeas UL basic meas rprt cycle RNC

MinForUlOlcMeas UL OLC meas rprt cycle RNC

MinForVpE Vp Event E Reporting Period In RNC MINLNKNUM Min Number of Links Activated RNC

MinPCPICHPower Min transmit power of PCPICH RNC MINRXINT Min interval of BFD packet rece RNC MINTXINT Min interval of BFD packet sen RNC MinUlChCodeLen Minimum SF of uplink DPDCH RNC Mmax Max preamble loop RNC

MNC Mobile network code RNC MNC Mobile network code RNC

MocnControlSwitch Mocn Control Switch RNC MOCNSupport MOCN Support RNC MODE Backup mode RNC MODE System clock working mode RNC MODE Check mode RNC

MODE Signalling link mode RNC MODE Configure mode RNC

MODINDTMR AAL2 modifying indication tim RNC MODREQTMR AAL2 modifying request timer RNC MoniterPrd re-TX monitor period RNC MoniTimeLen DCCC Rate Up Fail Monitor Tim RNC MPDHCPSVRIP MP Dhcp Server IP RNC

MPGRPN MLPPP Group No. RNC MPS Management proving status RNC MPTYPE MLPPP type RNC MPUSLOT MPU Slot No. RNC MrIntraFreqPeriod MR Intra-freq Measurement per RNC

MRScopeCtrl Set ON or OFF RNC MrSwitch MR Switch RNC

MrTrafficType MR Trace Traffic Type RNC MschSwitchForMtchMulti Msch Switch For MtchMulti Sc RNC MschSwitchForNonMtchMu Msch Switch For NonMtchMulti RNC MsgContent Msg Content RNC MsgInd Message Indicator RNC MSPCMD MSP Control Command RNC

MtchMaxPwr MTCH maximal power RNC

MtchMaxSf MTCH maximal SF RNC

MtchMinPerc0 Mtch Minimal Power Percent for RNC

MtchMinPerc15 Mtch Minimal Power Percent for RNC MtchMultiplexThd MTCH Multiplex Threshold RNC MtchRohcSwitch Mtch Rohc Switch RNC

MtchRsvPwr MTCH reserve power RNC

MtchRsvSf MTCH reserve SF RNC

MTRLGY MTRLGY RNC MTRLGY Metrology RNC

MTU MTU RNC

MUXTIME PPP mux frame group out-time RNC

MYDISCRIMINATOR My discriminator of BFD RNC N1 N1 RNC N300 Constant 300 RNC N302 Constant 302 RNC N304 Constant 304 RNC N308 Constant 308 RNC

N312 Constant 312 RNC N313 Constant 313 RNC N315 Constant 315 RNC N381 Constant 381 RNC

NAME Signalling Route name RNC

NB01max Random back-off upper limit RNC

NB01min Random back-off lower limit RNC NBAmrRrcNum AMR_RRC Number per Second RNC NBAPSRVPN NBAP service listening port No. RNC NBATMOAMIP NodeB ATM_TRANS IP addres RNC NBATMOAMMASK NodeB ATM_TRANS IP Mask RNC NBHighPriRrcNum HiPri_RRC Number per Second RNC NBIPOAMIP NodeB IP_TRANS IP address RNC NBIPOAMMASK NodeB IP_TRANS IP Mask RNC NBLB1 The First Serial Number RNC NBLB2 The Second Serial Number RNC

NBMCacAlgoSwitch Cell CAC algorithm switch RNC NBMDlCacAlgoSelSwitch Downlink CAC algorithm switc RNC

NBMLdcAlgoSwitch Cell LDC algorithm switch RNC

NbmLdcBHOUeSelSwitch BHO Select User algorithm swit RNC NBMMachsResetAlgoSelSw Mac-hs Reset algorithm switch RNC NBMUlCacAlgoSelSwitch Uplink CAC algorithm switch RNC NbmWpsAlgorithmPriority Set WPS user priority RNC NbmWpsAlgorithmSwitch Set WPS Algorithm Switch RNC NBTotalRrcNumThd NodeB Call Shock Trigger Thre RNC NBTRANTP NodeB TransType RNC NCC Network color code RNC

NCellId Neighboring cell ID RNC NCellLdrRemainThd Cell Dynamic ShutDown Neighb RNC

NCellRncId RNC ID of a neighboring cell RNC NcMode Network Control Mode RNC

NCountingThd Counting Threshold RNC NcovHoOn2GldInd NCOV Reloc Ind based on GSM RNC Ncrnonhcs Non-HCS NCR RNC NEIGHBOR Adjacent flag RNC

NEXTHOP Forward route address RNC NEXTHOP Forward route address RNC

NFastSpdEst Threshold for UE fast speed dec RNC NI Network ID RNC NInsyncInd Num of continuous in sync ind RNC NMO Network mode of operation RNC NNSfTmr Timer NNSF RNC

NODEBCABN NodeB Cab No. RNC NodeBHsdpaMaxUserNum NodeB Max HSDPA User Numb RNC NodeBHsupaMaxUserNum NodeB Max HSUPA User Numb RNC

NODEBID NodeB ID RNC

NODEBID NodeB ID RNC

NODEBID NodeB ID RNC NodeBId NodeB ID RNC NodeBId NodeB ID RNC NODEBIMAGRPN NodeB IMA group No. RNC

NodeBLdcAlgoSwitch NodeB LDC algorithm switch RNC NODEBNAME NodeB name RNC

NodeBName NodeB name RNC NodeBProtclVer NodeB Protocol version RNC NODEBRPTPERIOD Report period RNC NODEBRPTTYPE Report type RNC NODEBSN NodeB Slot No. RNC NODEBSRN NodeB Subrack No. RNC NODEBSUBBRDTYPE NodeB Subboard type RNC NodeBType NodeB Type RNC NodeSyncPeriod Measurement period RNC NodeSyncTime Measurement start time RNC NODET Adjacent Node Type RNC NodeType Small-scaled base station type RNC NonhcsInd Non-HCS indicator RNC NonServToTotalEdchPwrRa Target Non-serving E-DCH to T RNC NOutsyncInd Num of continuous out of sync i RNC

NPrio The priority of neighbor cell RNC NPrio The priority of neighbor cell RNC

NPrioFlag The flag of the priority RNC

NPtpToPtmOffset Ptp To Ptm Offset RNC NRI Network resource identity RNC

NRncId Neighboring RNC ID RNC NSAP Source ATM address RNC

NSAP Destination ATM address RNC

NSlowSpdEst Threshold for UE slow speed de RNC NullNRI NullNRI VALUE RNC NumberOfACs Number of restrained Access Cla RNC

OAMFLOWBW OAM flow min bandwidth RNC

OAMFLOWDSCP DSCP of OAM flow RNC OAMMINBWKEY OAM flow min bandwidth switc RNC OffQoffset1Heavy Qoffset1 offset 2 RNC OffQoffset1Light Qoffset1 offset 1 RNC OffQoffset2Heavy Qoffset2 offset 2 RNC OffQoffset2Light Qoffset2 offset 1 RNC OffSinterHeavy Sintersearch offset 2 RNC OffSinterLight Sintersearch offset 1 RNC

OlcPeriodTimerLen OLC period timer length RNC OperatorType Operator Type RNC OppositeTrchType Opposite direction transport cha RNC

OPTDS1MAPMODE Map mode of opt and DS1 RNC OptionalIESendSwitch Optional IE Send Switch RNC OPTM Optical interface standard RNC OrientOfMajorAxis Cell Center Orientation Of Majo RNC OT Operation type RNC OtdoaActivateFlag OTDOA Method Active Flag RNC OTDOAMethodType OTDOA Method Type RNC OverLayMobilityFlag OverLay Network Mobility Flag RNC OWNERSHIP AAL2 Path ownership RNC OWNERSHIP Destination ATM address owner RNC PATHCHK IP Path check flag RNC PATHID AAL2 path ID RNC

PATHID AAL2 Path ID RNC

PATHID IP path ID RNC PATHT IP path type RNC PATTYPE Patch Type. RNC PCHPower PCH power RNC

PCPICHPower PCPICH transmit power RNC PCPICHPowerPace Pilot power adjustment step RNC

PCR Peak cell rate RNC

PcSwitch Power control switch RNC PDTMRVALUE PENDING timer RNC

PDUPrid PDU Send Prid RNC

PDUSize PDU Pkt Len RNC

PeerCellId Peer Cell ID RNC PEERIP Peer IP address RNC PEERIP Peer IP RNC PEERIP1 First destination IP address RNC PEERIP2 Second destination IP address RNC PEERIPADDR Peer IP address RNC PEERIPADDR Peer IP address RNC PEERIPADDR Peer IP address RNC PEERIPADDR Peer IP address RNC

PeerIsValid Peer Cell Is Valid Or Not RNC PEERMASK Peer subnet mask RNC PeerNodebId Peer NodeB ID RNC PEERPN Destination SCTP port No. RNC PeerRncId Peer RNC ID RNC PEERT Peer type RNC

PenaltyTimeForPhyChFail Inter-Rat HO physical channel fa RNC


PenaltyTimer Inter-RAT Penalty timer length RNC PendingTime4A Pending time after trigger 4A RNC PendingTime4B Pending time after trigger 4B RNC

PendingTimeA Event A pending time after trigg RNC PendingTimeB Event B pending time after trigg RNC PERIOD Ping Check Period RNC

PeriodFor2B 2B event retry period RNC

PeriodFor2C 2C event retry period RNC

PeriodFor3A 3A event retry period RNC

PeriodFor3C 3C event retry period RNC

PeriodMRReportNumfor1 1A event to periodical rpt numb RNC

PeriodMRReportNumfor1C 1C event to periodical rpt numb RNC

PeriodMRReportNumfor1J 1J event to periodical rpt numbe RNC

PeriodProtectTimerCoeff Period common measure protect RNC PersistScalingFactor Persist Scaling Factor RNC

PFC Protocol field compress RNC PHB PHB RNC PHB Per-Hop Behavior RNC

PhyChId SCCPCH ID RNC PhyChIdforMcch SCCPCH ID for MCCH RNC PICHId PICH ID RNC PICHMode PICH mode RNC PICHPowerOffset PICH power offset RNC PIUSN Piu Slot No. RNC PKTCOUNT PKT Count RNC PKTLEN PKT Size RNC PKTMAXLEN Max Packet Length RNC PKTSIZE Size of packet RNC PKTSIZE PKT Size RNC

PlmnValTagMax Max PLMN value tag RNC

PlmnValTagMin Min PLMN value tag RNC PLPRD Packet lost measure period RNC PLTH Packet discard threshold RNC PMPRD IPPM packet send period RNC PN Port No. RNC PN Port No. RNC PN Port No. RNC PN Port NO. RNC PN Port No. RNC PN Port No. RNC PN Port No. RNC POINTDESINFO Rollbackpoint Description RNC POINTNAME Rollbackpoint Name RNC

PollTimerLen Poll timer length RNC

POLLTMR Timer_Poll RNC Port Destination Port RNC PORTPROTYPE Port protocol type RNC PORTTYPE Port Type RNC POWER_RELAY1 Switch for Relay 1 RNC POWER_RELAY2 Switch for Relay 2 RNC POWER_RELAY3 Switch for Relay 3 RNC POWER_RELAY4 Switch for Relay 4 RNC POWER_RELAY5 Switch for Relay 5 RNC POWER_RELAY6 Switch for Relay 6 RNC PowerOffsetPpm Power offset RNC PowerRampStep Power increase step RNC PPPDHCPSVRIP PPP Dhcp Server IP RNC PPPLNK PPP link No. RNC

PPPLNKN PPP link No. RNC

PPPMUX PPP mux RNC PQNUM Priority queue number RNC PRACHPhyChId PRACH ID RNC

PrdReportInterval Inter-frequency measure periodic RNC PrdReportInterval Inter-frequency measure periodic RNC PreambleRetransMax Max preamble retransmission RNC PreambleSignatures Preamble signatures RNC PreemptAlgoSwitch Preempt algorithm switch RNC PreemptRefArpSwitch PreemptRefArpSwitch RNC PRIORITY Priority RNC

PRIORITY Signalling link priority RNC

PRIORITY Route priority RNC Priority Block priority RNC PriorityReference Integrate Priority Configured R RNC PriorityServiceForExtRab Service priority of Other service RNC PriorityServiceForHSDPA Service priority of HSDPA servi RNC PriorityServiceForHSUPA Service priority of HSUPA servi RNC PriorityServiceForR99NRT Service priority of R99 NRT ser RNC PriorityServiceForR99RT Service priority of R99 RT servi RNC ProcessDuration Processing duration RNC

PROCESSSWITCH Process switch RNC

PROT SS7 protocol type RNC ProtectTmrForBac Background service T2 RNC ProtectTmrForCon Conversational service T2 RNC ProtectTmrForImsSig IMS signal T2 RNC ProtectTmrForInt Interactive service T2 RNC

ProtectTmrForStr Streaming service T2 RNC

PS Port select RNC PsBeProcType Handover Type for PS BE Traffi RNC PSBKGDL R99 PS background service down RNC PSBKGPRIPATH R99 PS background primary pat RNC PSBKGPRITH R99 PS background pri path load RNC PSBKGSECPATH R99 PS background secondary p RNC PSBKGSECWHT R99 PS background pri sec path RNC PSBKGUL R99 PS background service uplin RNC PSCHPower PSCH transmit power RNC PSCONVDL R99 PS conversational service d RNC PSCONVPRIPATH R99 PS conversational primary RNC PSCONVPRITH R99 PS conversational pri path RNC PSCONVSECPATH R99 PS conversational secondar RNC PSCONVSECWHT R99 PS conversational pri sec pa RNC PSCONVUL R99 PS conversational service u RNC

PScrambCode DL primary scrambling code RNC PSHIGHINTERACTPRIT R99 PS high interactive pri path RNC PSHIGHINTERACTSEC R99 PS high interactive pri sec p RNC

PSHOOut2GloadThd PS domain Reloc GSM load TH RNC PsInactTmrForBac Background service T1 RNC PsInactTmrForCon Conversational service T1 RNC PSInactTmrForImsSig IMS signal T1 RNC PsInactTmrForInt Interactive service T1 RNC

PsInactTmrForStr Streaming service T1 RNC PsInfoUpdFlag PS Information Update Switch RNC PsInfoUpdTmr PS Information Update Protecti RNC PSINTERDL R99 PS interactive service down RNC PSINTERUL R99 PS interactive service uplin RNC PSINTHGHPRIPATH R99 PS high PRI interactive pri RNC PSINTHGHSECPATH R99 PS high PRI interactive sec RNC PSINTLOWPRIPATH R99 PS low PRI interactive prim RNC PSINTLOWSECPATH R99 PS low PRI interactive sec RNC PSINTMIDPRIPATH R99 PS middle PRI interactive p RNC PSINTMIDSECPATH R99 PS middle PRI interactive RNC PSLOWINTERACTPRITH R99 PS low interactive pri path RNC PSLOWINTERACTSECW R99 PS low interactive pri sec p RNC PSMIDINTERACTPRITH R99 PS mid interactive pri path RNC PSMIDINTERACTSECW R99 PS mid pri sec path load rat RNC PsNriCfgMode PS NRI configuration RNC PSNRILength Length of PS NRI in bits RNC PsRabAbnormRelRatioThd PS drop ratio Per Spu RNC PsRabEstAttMinNum The minimum of Ps Rab attempt RNC PsRabEstSuccRatioThd Ps Rab successful setup ratio Pe RNC PsRabRelMinNum The number of PS drop Per Spu. RNC PsRestriction Restriction for PS RNC PSServiceHOSwitch Inter-RAT PS handover switch RNC PSSTRMDL R99 PS streaming service downl RNC PSSTRMPRIPATH R99 PS streaming primary path RNC PSSTRMPRITH R99 PS streaming pri path load RNC PSSTRMSECPATH R99 PS streaming secondary pat RNC PSSTRMSECWHT R99 PS streaming pri sec path lo RNC PSSTRMUL R99 PS streaming service uplink RNC

PsSwitch PS rate negotiation switch RNC Psthroughput Max throughput of PS RNC PT Port Type RNC PTIP NodeB Interface IP Address RNC PTIPMASK NodeB Interface IP Mask RNC PtmNullStrmPasiSwitch Ptm Null Stream Passivity Swit RNC PtmPreemptSwitch Ptm Preempt Switch RNC PtmStrmPasiSwitch Ptm Stream Passivity Switch RNC PTYPE Port type RNC

PucAvgFilterLen PUC moving average filter leng RNC

PucPeriodTimerLen PUC period timer length RNC PunishTime Punish Time RNC PwrCtrlAlg Power control algorithm selecti RNC Q0MINDSCP Min DSCP of queue 0 RNC Q1MINDSCP Min DSCP of queue 1 RNC Q2MINDSCP Min DSCP of queue 2 RNC Q3MINDSCP Min DSCP of queue 3 RNC Q4MINDSCP Min DSCP of queue 4 RNC

QAAL2VER Qaal2 Protocol Version RNC

Qhcs Quality threshold for HCS resel RNC Qhyst1sfach Hysteresis 1for UE in CELL_FA RNC Qhyst1spch Hysteresis 1 for UE in CELL_ RNC Qhyst2sfach Hysteresis 2 for UE in CELL_F RNC Qhyst2spch Hysteresis 2 for UE in CELL_ RNC Qoffset1sn Qoffset1sn RNC

Qqualmin Min quality level RNC QqualminInd Min quality level ind RNC Qrxlevmin Min RX level RNC

Qrxlevmin Min Rx level RNC

QrxlevminExtSup Min Rx level Extend Support RNC QrxlevminInd Min RX level ind RNC QualMeas Cell Sel-reselection quality mea RNC QueueAlgoSwitch Queue algorithm switch RNC QueueLen Queue length RNC

RabIndex Service parameter index RNC RabModifyTimerLen Rab Modify Timer Length RNC

RAC Routing area code RNC RACHSubChNo RACH sub channel no. RNC RafcTmr Trafc RNC RANSharingSupport RAN Sharing Support RNC RatCellType Inter-RAT cell type RNC RatcTmr Tratc RNC

RateMatchingAttr Rate matching attribute RNC RateRecoverTimerLen DL TF rate recover timer length RNC RateRstrctCoef DL TF rate restrict coefficient RNC RateRstrctTimerLen DL TF rate restrict timer length RNC

RBPNAME name of rollback point RNC RBPTYPE type of rollback point RNC RbRecfgRspTmr Wait RB reconfiguration respon RNC RbRelRspTmr Wait RB release response timer RNC RbSetupRspTmr Wait RB setup response timer RNC RDC Rate down coefficient RNC RecountingPeriod Recounting Period RNC RecoverCoef DL TF rate recover coefficient RNC

RECOVERTHD Decrease rate alarm recover thr RNC RED Backup RNC

ReDirBandInd ReDirection target band indicato RNC

RedirFactorOfLDR Redirection Factor Of LDR RNC

RedirFactorOfNorm Redirection Factor Of Normal RNC

RedirSwitch Redirection Switch RNC

ReDirUARFCNDownlink Redirection target downlink RNC

ReDirUARFCNUplink Redirection target uplink UAR RNC

ReDirUARFCNUplinkInd Redirection target UL frequency RNC REF2MCLKSRC Clock source of output clock RNC REF2MCLKSW1 Output switch of 2M output cloc RNC REF2MCLKSW2 Output switch of 2M output cloc RNC RegByFachSwitch Register Bear by Fach Switch RNC ReHostPolicy Re-host Policy Type RNC RELINDTMR Release indication timer RNC RelocAnotherTmr Relocation another request timer RNC RelocCmdTmr Relocation Command timer RNC RelocCommitTmr Relocation commit timer RNC

RelocDataFwdTmr Relocation data forwarding time RNC RelocFailIuRelCmdTmr Relocation failed Iu release co RNC RelocIuRelCmdTmr Relocation Iu release command RNC RelocMobilConfTmr Relocation mobile info confirma RNC RelocPhychRecfgTmr Relocation PhyCh reconfigurati RNC RelocUtranHoCmpTmr Relocation Inter-RAT HO compl RNC RELREQTMR Release request timer RNC

RelThdForDwnGrd Relative threshold of SHO failur RNC

REMARK Route use description RNC

REMARK Use description RNC RepeatNum Repeat Number RNC RepeatPeriod Repeat Period RNC

ReportIntervalfor1A 1A event to periodical rpt period RNC

ReportIntervalfor1C 1C event to periodical rpt period RNC

ReportIntervalfor1J 1J event to periodical rpt period RNC Req2GCap Required 2G Capability RNC ReservedSwitch0 CORRM Algo reserved switch 0 RNC ReservedSwitch1 CORRM Algo reserved switch 1 RNC ReservedU32Para0 CORRM Algo reserved U32 Par RNC ReservedU32Para1 CORRM Algo reserved U32 Par RNC ReservedU8Para0 CORRM Algo reserved U8 Para RNC ReservedU8Para1 CORRM Algo reserved U8 Para RNC RESREQTMR Reset request timer RNC

RESTARTTMR son-protocol confer out time RNC ReTransRatioFilterCoef re-TX measure filter coef RNC RetryCapability BIT MAP of retry HSPA PLUS c RNC RlcMode RLC mode selection RNC

RLCSize RLC size RNC RlMaxDlPwr RL Max DL TX power RNC RlMinDlPwr RL Min DL TX power RNC RlRecfgReadyTmr RL reconfiguration timer RNC RlRelRspTmr RL release timer RNC RlRstrTmr RL restoration timer RNC RlSetupRspTmr RL setup response timer RNC RNCID RNC ID RNC RncId RNC ID RNC

RNCId RNC ID RNC

RNCID RNC ID RNC RNCIPADDR CBS RNC IP address RNC RncProtclVer RNC protocol version RNC

RPTTHD Decrease rate alarm report thres RNC RrcCause Cause of RRC connection establ RNC RrcConnEstabAttMinNum The minimum of Rrc connection RNC RrcConnEstabSuccRatioTh Rrc connection successful ratio RNC RrcConnRejWaitTmr Wait Time In RRC Connection RNC RrcInitDtTmr RRC initial DT timer RNC RrcIuRelCmdTmr RRC Iu release command timer RNC

RrcPaingType1Tmr RRC paging type 1 response tim RNC RrcRelRetranTmr RRC release retransmission time RNC RrcRlcAckCmpTmr RRC RLC completion acknowle RNC RrcSecrtModeCmpTmr RRC security mode completion RNC RrcUeRspTmr RRC UE response timer RNC RSCGRPFLAG Add To Rscgrp Flag RNC RSCGRPN Rscgrp No. RNC RSCGRPN Rscgrp No. RNC

RSCMNGMODE Resource management mode RNC RSCMNGMODE Resource management mode RNC RscMngMode Resource Management Mode RNC RSNDES Lock Reason RNC

RSPTMR Timer_No-Response RNC

RSTCNTYPE CN Type by Reset RNC RSTFUN Restart switch RNC RstRsndNum Times of resending reset messa RNC RSTTYPE Reset Type RNC RsvdPara1 Reserved parameter 1 RNC RsvdPara1 Reserved parameter 1 RNC RsvdPara1 Reserved parameter 1 RNC RSVDPARA1 Reserved Parameter 1 RNC

RsvdPara1 Reserved parameter 1 RNC RsvdPara1 Reserved Parameter1 RNC RSVDPARA10 Reserved Parameter 10 RNC RsvdPara10 Reserved Parameter10 RNC RsvdPara11 Reserved Parameter11 RNC RsvdPara12 Reserved Parameter12 RNC RsvdPara13 Reserved Parameter13 RNC RsvdPara14 Reserved Parameter14 RNC RsvdPara15 Reserved Parameter15 RNC RsvdPara16 Reserved Parameter16 RNC RsvdPara2 Reserved parameter 2 RNC RsvdPara2 Reserved parameter 2 RNC RSVDPARA2 Reserved Parameter 2 RNC

RsvdPara2 Reserved parameter 2 RNC RsvdPara2 Reserved Parameter2 RNC RSVDPARA3 Reserved Parameter 3 RNC

RsvdPara3 Reserved parameter 3 RNC RsvdPara3 Reserved Parameter3 RNC RSVDPARA4 Reserved Parameter 4 RNC RsvdPara4 Reserved Parameter4 RNC RSVDPARA5 Reserved Parameter 5 RNC RsvdPara5 Reserved Parameter5 RNC RSVDPARA6 Reserved Parameter 6 RNC RsvdPara6 Reserved Parameter6 RNC RSVDPARA7 Reserved Parameter 7 RNC RsvdPara7 Reserved Parameter7 RNC RSVDPARA8 Reserved Parameter 8 RNC RsvdPara8 Reserved Parameter8 RNC RSVDPARA9 Reserved Parameter 9 RNC RsvdPara9 Reserved Parameter9 RNC RT Revertive type RNC

RTCONTEXT Routing Context RNC RTCPBWRatio RATE OF RTCP BANDWIDTH RNC RtCpc2EFachStateTransTi Realtime Traff CPC_HSPA to E_ RNC RtCpc2FStateTransTimer Realtime Traff CPC_HSPA to FA RNC RTCPSwitch RTCP SWITCH RNC RTDEST Destination network address RNC RTDESTMASK Destination address mask RNC RtDH2EFachStateTransTim Realtime Traff DCH or HSPA to RNC RtDH2FStateTransTimer Realtime Traff DCH or HSDPA RNC RtDH2FTvmPTAT RT D/HSPA2F 4b Pending Tim RNC RtDH2FTvmThd RT D/HSPA2F 4b Threshold RNC RtDH2FTvmTimeToTrig RT D/HSPA2F 4b Time RNC

RtEFach2CpcTvmThd RT E_FACH2CPC_HSPA 4a thr RNC RtEFach2CpcTvmTimeToT RT E_FACH2CPC_ HSPA 4a ti RNC

RtEFach2DHTvmThd RT E_FACH2D/HSPA 4a thresh RNC RtEFach2DHTvmTimeToTr RT E_FACH2D/HSPA 4a time RNC

RtF2CpcTvmThd RT F2CPC_HSPA 4a threshold RNC RtF2CpcTvmTimeToTrig RT F2CPC_HSPA 4a time RNC

RtF2DHTvmThd RT F2D/HSPA 4a Threshold RNC RtF2DHTvmTimeToTrig RT F2D/HSPA 4a Time RNC RTOALPHA RTO alpha value RNC RTOBETA RTO beta value RNC RTOINIT RTO initial value RNC RTOMAX RTO max value RNC RTOMIN RTO min value RNC RTX Route index RNC

RUS Rate up step RNC RUSPRD Rate up step adjust period RNC RXBW Backward bandwidth RNC RXBW Backward bandwidth RNC RxBw Backward Bandwidth RNC

RXTRFX RX traffic record index RNC

RxTxtoTrig6F 6F event trigger threshold RNC

RxTxtoTrig6G 6G event trigger threshold RNC SAALLNKN SAAL link No. RNC

SAALLNKN SAAL link No. RNC SAALLNKT Interface type RNC SAALTMR SAAL link connection timer RNC

SAC Service area code RNC SATELLITEIND Satellite Trans Ind RNC SCCPCHOffset SCCPCH offset RNC ScopeType Scope Type RNC

SCR Sustainable cell rate RNC ScrambCode Scrambling code RNC

SCRAMBLESW Scramble Switch RNC

SCTPLNKN SCTP link No. RNC SDAY Start date RNC SDENABLE SD Enable RNC SDSFPRI SDSF Priority RNC Seed Seed of the pseudo-random sequ RNC SelectType Detect type RNC SeqOfUserRel Sequence of user release RNC

ServerIP FTP Server IP Address RNC SERVERNAME Server name RNC

ServiceBitRate Service Bit Rate RNC

ServiceDiffDrdSwitch Service differential drd switch RNC ServiceId Service ID RNC ServiceInd CN domain indication RNC

ServiceType Service Type RNC SGSNFLG SGSN FLAG RNC

SharingOutCAPSMidLoad Sharing out capability middle lo RNC SharingType Sharing Type Of NodeB RNC SHCSRat HCS inter-rat reselection thresh RNC SHInd Service Handover Indicator RNC ShoFailNumForDwnGrd Threshold number of SHO failur RNC ShoFailPeriod Max evaluation period of SHO f RNC

SHOQualmin Min quality THD for SHO RNC

SHOTRIG SHO cross IUR trigger RNC

SIB11Ind SIB11 Indicator RNC

SIB12Ind SIB12 Indicator RNC SibCfgBitMap SIB switch RNC SigChType channel type for RRC establish RNC

SIGLKSX Signalling linkset index RNC SIGLNKID Signalling link ID RNC SigRbInd Bearing signal indication RNC SIGSLC Signalling link code RNC

SilverMaxMode Max Mode Of Wideband AMRC F RNC

SilverMaxMode Max Mode Of Narrowband AMRC RNC SingalDlMBR Downlink maximum bit rate of S RNC SingalUlMBR Uplink maximum bit rate of Sig RNC SIPADDR Source IP address RNC SIPDL IMS SRB service downlink fact RNC SIPPRIPATH IMS SRB primary path RNC SIPPRITH IMS Signal pri path load thresho RNC SIPSECPATH IMS SRB secondary path RNC SIPSECWHT IMS Signal pri sec path load rat RNC SIPUL IMS SRB service uplink factor RNC SlimitSearchRat HCS search inter-rat limit thres RNC SlotFormat Slot format RNC SlotFormat1 Slot format 1 RNC SlotFormat2 Slot format 2 RNC SlotFormat3 Slot format 3 RNC SlotFormat4 Slot format 4 RNC SlotFormatNum Number of PRACH slot formats RNC SLSMASK Signalling route mask RNC SM StartType RNC SmlcMethod UE Positioning Method RNC SMOKE_MASK Enable Smoke Alarm Reporting RNC SMONTH Start month RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC

SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC

SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC SN ATM Logic Port Slot No. RNC SN Slot No. RNC SN Logic port slot No. RNC SN Slot No. RNC

SN Slot No. RNC SN Slot No. RNC SN Slot No. RNC

SN Slot No. RNC SN Slot No. RNC

SN Slot No. RNC

SNAC Sharing Network Area Code RNC

SnaExistInd SNAC Configuration Indication RNC SndLdInfo2GsmInd Send Load Info to GSM Ind RNC

SPC OSP code RNC SPCBITS OSP code bits RNC SPCDNF OSP code RNC SpdEstSwitch Algorithm Switch for UE speed RNC

SPDF Signal point data format RNC

SPEED FE port speed RNC SpeedDependentScalingFac Speed dependent scaling factor f RNC

SpgId Service priority group Identity RNC

SPI Scheduling Priority Indicator RNC SPORTNO Src Port NO. RNC

SpucHeavy Load level division threshold 1 RNC

SpucHyst Load level division hysteresis RNC

SpucLight Load level division threshold 2 RNC SPUShareThd SPU traffic share threshold RNC SrbChlType SRB channel type RNC SrbChlTypeRrcEffectFlag SRB channel type RRC effect fl RNC SRBDL SRB service downlink factor RNC SRBGBR SRB MAC-c flow GBR RNC SRBMBR SRB MAC-c flow MBR RNC SRBPRIPATH SRB primary path RNC SRBPRITH Signal pri path load threshold RNC SRBSECPATH SRB secondary path RNC SRBSECWHT Signal pri sec path load ratio th RNC SRBUL SRB service uplink factor RNC SRCE1T1LNKN Source link No. RNC

SRCGRD Clock source priority RNC SRCGRD Currently system clock priority RNC

SRCIP Source IP RNC

SRCMEPID MEP ID RNC SRCT Clock source type RNC SRCTSN Source time slot No. RNC SRECTMR Timer_REPEAT-SREC RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC

SRN Subrack No. RNC SRN Subrack No. RNC

SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN ATM Logic Port Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC

SRN Subrack No. RNC SRN Subrack No. RNC

SRN Subrack No. RNC SRN Subrack No. RNC SRN Subrack No. RNC

SRN Subrack No. RNC

SRN Subrack No. RNC SRName Subrack name RNC SrncBeDlRlcQosSwitch Srnc Parameter for BE Downli RNC SrnsRabCnDomainType SRNS relocation-allowed traffic RNC SRNSRDelayOffset Estimated non-measurement dela RNC SRNSRExpiryTime SRNS relocation expiry time RNC SRNSRIurReselectTimerL SRNSR Iur reselection timer RNC SrnsrSeparateDuration Duration of triggering static rel RNC

SrnsrSwitch SRNSR algorithm switch RNC SRNSRTrigTimer Relocation trigger timer after RNC SRNTI SRNTI RNC SRT Subrack type RNC SSCHPower SSCH transmit power RNC SSCPUAVEUSAGEALMT CPU occupancy alarm clearance RNC SSCPUMAXUSAGEALM CPU occupancy alarm threshold RNC

Ssd Source description RNC

SSDSPAVEUSAGEALMT DSP occupancy alarm clearance RNC

SSDSPMAXUSAGEALM DSP occupancy alarm threshold RNC SsearchHCS HCS cell reselection threshold RNC SsearchRat Inter-RAT cell reselection thres RNC SSN Subsystem No. RNC SSN Subsystem No. RNC

SSN Subsystem No. RNC SSN Subsystem No. RNC SSN Subsystem No. RNC

SSN Subsystem No. RNC ST StartTime RNC ST Service type RNC StaBlkNum5A Statistic Block Number For 5A RNC StartFlag GPS Frame Timing Active Flag RNC StartTime1 First Cell Dynamic ShutDown In RNC StartTime2 Second Cell Dynamic ShutDown RNC StartTime3 Third Cell Dynamic ShutDown In RNC StateIndTmr CN protection timer RNC StateIndTMR Sccp state ind protection timer RNC STATLEN MaxSTAT RNC STP STP function switch RNC STPMODE Stop mode RNC StreamDlMBR Downlink maximum bit rate of RNC STREAMGBR Streaming MAC-c flow GBR RNC StreamHsupa2msTtiRateTh Rate threshold of Streaming o RNC STREAMMBR Streaming MAC-c flow MBR RNC StreamUlMBR Uplink maximum bit rate of Str RNC

STTDInd STTD indicator RNC

STTDSupInd STTD support indicator RNC

SubflowIndex Service subflow index RNC SUBFRAMELEN Max subframe length RNC SUBNET Subnet No. RNC SupBmc CBS support RNC SuppDlSf512 Support downlink DPCH SF 51 RNC SuppDpcmodeChgFlag Support DPC mode Change ind RNC

SuppDpcTriplet Support DPC mode TRIPLET RNC SuppIurCch IUR CCH support flag RNC SupportCRType CR support type RNC SuppPSHOFlag Inter-RAT cell support PS HO in RNC SuppPsRtServOnHsdpa Support PS realtime traffic on RNC SuppRIMFlag Inter-RAT cell support RIM indi RNC SW Switch RNC SWEEK Start week RNC

Switch Port switch RNC Switch3GPP25415CR0125 Switch3GPP25415CR0125 RNC

SWITCHBACKFLAG Switch primary IP address flag RNC SWITCHBACKHBNUM Switch back HB number RNC SwitchParameter1 SwitchParameter1 RNC SwitchParameter10 SwitchParameter10 RNC SwitchParameter2 SwitchParameter2 RNC SwitchParameter3 SwitchParameter3 RNC SwitchParameter4 SwitchParameter4 RNC SwitchParameter5 SwitchParameter5 RNC SwitchParameter6 SwitchParameter6 RNC SwitchParameter7 SwitchParameter7 RNC SwitchParameter8 SwitchParameter8 RNC SwitchParameter9 SwitchParameter9 RNC SWSEQ Start week sequence RNC SysAmrRrcNum AMR_RRC Number per Second RNC SYSCONTACT Contact mode of the manufactur RNC SYSDESC System description RNC SysHighPriRrcNum HiPri_RRC Number per Second RNC SysHoPsResumeTmr PS resume timer after SYSHO RNC SYSLOCATION System Location RNC SYSOBJECTID System ID RNC SysRrcRejNum Max RRC_REJ Number per Seco RNC SYSSERVICES System services RNC SysTotalRrcNumThd System Call Shock Trigger Thre RNC T10TMR Signalling route set test timer RNC T12TMR Uninhibit ACK timer RNC T13TMR Force uninhibit timer RNC T14TMR Inhibition ACK timer RNC T17TMR Link realignment timer RNC T1TMR Time-control changeover timer RNC T22TMR Local inhibit test timer RNC T23TMR Remote inhibit test timer RNC T2TMR Changeover ACK timer RNC T300 Timer 300 RNC T302 Timer 302 RNC T304 Timer 304 RNC T305 Timer 305 RNC T307 Timer 307 RNC T308 Timer 308 RNC T309 Timer 309 RNC

T312 Timer 312 RNC T313 Timer 313 RNC T314 Timer 314 RNC T315 Timer 315 RNC T316 Timer 316 RNC T3212 Periodical location update timer RNC

T381 Timer 381 RNC T3TMR Time-control changeback timer RNC T4TMR Changeover ACK first attempt t RNC T5TMR Changeover ACK second attempt RNC T8TMR Transmission prohibited inhibiti RNC TagetRlcRetrans Target Rlc Retransmission rate RNC

TargetFreqCsThdEcN0 Inter-freq CS target frequency RNC

TargetFreqCsThdRscp Inter-freq CS target frequency RNC

TargetFreqHThdEcN0 Inter-freq H target frequency t RNC

TargetFreqHThdRscp Inter-freq H target frequency RNC

TargetFreqR99PsThdEcN0 Inter-freq R99 PS target freque RNC

TargetFreqR99PsThdRscp Inter-freq R99 PS target frequ RNC

TargetRatCsThd Inter-RAT CS handover decisi RNC

TargetRatHThd Inter-RAT H handover decisio RNC

TargetRatR99PsThd Inter-RAT R99 PS handover de RNC TB Output Segment No. RNC TbIndexNum Configured TBS Count for HS RNC

TbNumber1 TB number of TF1 RNC

TbNumber2 TB number of TF2 RNC TbNumber3 TB number of TF3 RNC

TbSizeIndex1 TB Size Index 1 RNC



TbSizeIndex4 TB Size Index 4 RNC TC Test code RNC

TCell Time offset RNC TCellId Target cell ID RNC TCLEN Test code length RNC TCRmax Time for evaluating max cell res RNC TCrmaxHyst Time before revert to low-mobil RNC Tcrmaxhystnonhcs Non-HCS TCR max hysteresis RNC Tcrmaxnonhcs Non-HCS max TCR RNC

TCycleSlow Period of UE slow speed decisio RNC

TEMP_MASK Enable Temperature Alarm Repo RNC TEMP_THD_HIGH Upper Limit of Temperature Al RNC TEMP_THD_LOW Lower Limit of Temperature Al RNC

TempOffset1 HCS Cell Reselect TempOffset1 RNC

TempOffset2 HCS Cell Reselect TempOffset2 RNC

TenMsecForAmrE Amr Event E Reporting Period RNC

TenMsecForBeE Be Event E Reporting Period In RNC

TenMsecForBeF Be Event F Reporting Period In RNC

TenMsecForDlBasicMeas DL basic meas rprt cycle RNC

TenMsecForDlOlcMeas DL OLC meas rprt cycle RNC

TenMsecForHsdpaPrvidRa HSDPA bit rate meas cycle RNC

TenMsecForHsdpaPwrMea HSDPA need pwr meas cycle RNC TenMsecForHsupaPrvidRa HSUPA bit rate meas cycle RNC

TenMsecForUlBasicMeas UL basic meas rprt cycle RNC

TenMsecForUlOlcMeas UL OLC meas rprt cycle RNC

TenMsecForVpE Vp Event E Reporting Period In RNC

TFastSpdEst Time window for UE fast speed RNC TFCIpresence TFCI existing indicator RNC

TFsNumber Number of TFs RNC TG Target BAM RNC Thd5A Event 5A Threshold RNC ThdEa Event Ea Relative Threshold RNC

ThdEb Event Eb Relative Threshold RNC THP Traffic Handling Priority RNC THP10Class User Class of Traffic Handler Pr RNC THP11Class User Class of Traffic Handler Pr RNC THP12Class User Class of Traffic Handler Pr RNC THP13Class User Class of Traffic Handler Pr RNC THP14Class User Class of Traffic Handler Pr RNC THP15Class User Class of Traffic Handler Pr RNC THP1Class User Class of Traffic Handler Pr RNC THP2Class User Class of Traffic Handler Pr RNC THP3Class User Class of Traffic Handler Pr RNC THP4Class User Class of Traffic Handler Pr RNC THP5Class User Class of Traffic Handler Pr RNC THP6Class User Class of Traffic Handler Pr RNC THP7Class User Class of Traffic Handler Pr RNC THP8Class User Class of Traffic Handler Pr RNC THP9Class User Class of Traffic Handler Pr RNC THPClass Traffic Handler Priority Class RNC TIMEOUT Reply Time-Out RNC

TIMEOUT Time Out RNC Timer Block time RNC TIMERCU Timer_CU timer RNC TIMES Number of ping packets RNC TimeToInterfreqHO Inter-freq coverage handover del RNC TimeToInterfreqHO Inter-freq coverage handover del RNC TimeToMoniter Time to start re-TX monitor RNC

TimeToTrig2B 2B event trigger delay time RNC

TimeToTrig2D 2D event trigger delay time RNC

TimeToTrig2F 2F event trigger delay time RNC TimeToTrigForNonVerify Time to trigger for non-verifie RNC TimeToTrigForNonVerify Time to trigger for non-verifie RNC TimeToTrigForNonVerify Time to trigger for non-verifie RNC

TimeToTrigForPrdInterFre HHO period trigger delay time RNC

TimeToTrigForVerify Time to trigger for verified GSM RNC

TimeToTrigForVerify Time to trigger for verified GSM RNC TimetoTrigger4A Time to trigger 4A RNC TimetoTrigger4B Time to trigger 4B RNC

TimeToTriggerA Event A time to trigger RNC TimeToTriggerB Event B time to trigger RNC TMI TRMMAP ID RNC TMIBRZ Bronze user TRMMAP index RNC TMIGLD Gold user TRMMAP index RNC TMISLV Silver user TRMMAP index RNC TMT1TMR Signalling link test ACK timer RNC TMT2TMR Signalling link repeat test timer RNC TnlBearerType IUR trans bearer type RNC TnlBearerType Iu transfers bearer type RNC TnlBearerType IUB trans bearer type RNC TO AdjustMethod RNC

ToAWE Time of arrival window endpoin RNC

ToAWS Time of arrival window startpoi RNC

TotalUserNumThd Cell Dynamic ShutDown Total RNC

TP Log type RNC

TpenaltyHcsReselect HCS Cell Reselect Penalty Time RNC TrafficClass Traffic Class RNC

TrafficClass Traffic Class RNC TrafficType Traffic Type RNC TrafficType Traffic Type RNC

TRAMODE Traffic mode RNC TransCchUserNum Transfer Common Channel User RNC TRANSDELAY IUB Trans Delay RNC TRANST Transport Type RNC

TRANST Transport Type RNC

TrChId FACH ID RNC TrchType Transport channel type RNC TrchType Transport channel type RNC TrchType Transport channel type RNC

TRelateLength Related length for 1D records RNC

Treselections Reselection delay time RNC Treselectionsfach Reselection delay time for UE RNC Treselectionspch Reselection delay time for UE i RNC

TRFX Traffic record index RNC

TrigTime1A 1A event trigger delay time RNC

TrigTime1B 1B event trigger delay time RNC

TrigTime1C 1C event trigger delay time RNC

TrigTime1D 1D event trigger delay time RNC

TrigTime1F 1F event trigger delay time RNC

TrigTime1J 1J event trigger delay time RNC

TrigTime2D 2D event trigger delay time RNC

TrigTime2F 2F event trigger delay time RNC

TrigTime3A 3A event trigger delay time RNC

TrigTime3C 3C event trigger delay time RNC TrigTime6F 6F event trigger delay time RNC TrigTime6G 6G event trigger delay time RNC

TRKLNKPN Trunk Link No. RNC

TRKLNKSN Trunk Link Slot No. RNC

TRKN Trunk No. RNC TRlFailure Radio link failure timer length RNC TRncId RNC ID of Target Cell RNC TRUNKDHCPSVRIP TRUNK Dhcp Server IP RNC TRUNKIP NodeB Interface IP Address RNC TRUNKIPMASK NodeB Interface IP Mask RNC TRUNKN The Trunk group No. RNC TS time slot No. RNC TS16ENABLE 16TimeSlot switch RNC

TSBITMAP Bearing time slot RNC TSCROSSX Time slot cross index RNC TSKN Task Name RNC

TSlowSpdEst Time window for UE slow speed RNC TstImsi MGWTST USER IMSI RNC TSTLEN Test Len RNC TstSwitch MGWTST SWITCH RNC TTIME Duration time RNC TTL PKT TTL RNC TXBW Forward bandwidth RNC TXBW Forward bandwidth RNC TxBw Forward Bandwidth RNC

TxDiversityInd TX diversity indication RNC TXINT Interval of send RNC TXINT Interval of Packet Send RNC

TXTRFX TX traffic record index RNC TYPE Application Type RNC

UARFCNDownlink Downlink UARFCN RNC

UARFCNUplink Uplink UARFCN RNC

UARFCNUplinkInd UL frequency ind RNC UBLREQTMR Unblocking request timer RNC UDPMUXLEN UDP MUX Max Length RNC UDPMUXMODRECV Receive UDP MUX Mode RNC UDPMUXMODSEND Sender UDP MUX Mode RNC UDPMUXTIME UDP MUX Max Time RNC UeAssAgpsAssDataSwitch UE-assisted A-GPS Data Send s RNC UeBasAgpsAssDataSwitch UE-based A-GPS Data Send Swi RNC UeCapEnqRspTmr UE capability enquiry response RNC UeCntCheckRspTmr UE counter check response time RNC UINT Uninhibit Type RNC UINTTIME Unit time RNC UL Upper Limit RNC UlAmrConvAF UL AF of R99 AMR conv servi RNC

UlAmrTrigTime6A1 Amr Trigger Time 6A1 RNC

UlAmrTrigTime6A2 Amr Trigger Time 6A2 RNC

UlAmrTrigTime6B1 Amr Trigger Time 6B1 RNC

UlAmrTrigTime6B2 Amr Trigger Time 6B2 RNC

UlAmrTrigTime6D Amr Trigger Time 6D RNC UlBackgroundAF UL AF of R99 background servi RNC

UlBasicCommMeasFilterCo UL basic common measure filter RNC

UlBeTraffDecThs UL BE traffic DCH decision thr RNC UlBeTraffInitBitrate UL BE traffic Initial bit rate RNC

UlBeTraffThsOnHsupa UL BE traffic threshold on HS RNC

UlBeTrigTime6A1 Be Trigger Time 6A1 RNC

UlBeTrigTime6A2 Be Trigger Time 6A2 RNC

UlBeTrigTime6B1 Be Trigger Time 6B1 RNC

UlBeTrigTime6B2 Be Trigger Time 6B2 RNC

UlBeTrigTime6D Be Trigger Time 6D RNC

UlCacAvgFilterLen UL CAC moving average filter l RNC UlCCHLoadFactor UL common channel load reserve RNC

UlCellTotalThd UL total power threshold RNC UlCmMethod Uplink Compression Method RNC

UlCSInterRatShouldBeH UL CS should be HO user numb RNC

UlCSInterRatShouldNot UL CS should not be HO user n RNC

UlDcccRateThd Uplink Bit Rate Threshold For RNC UlFpMode UL FP Mode RNC

UlFullCvrRate Uplink Full Coverage Bit Rate RNC UlGBR Uplink GBR for BE service RNC

UlHoCeResvSf UL handover credit reserved SF RNC UlHsDpcchRsvdFactor UL HS-DPCCH reserve factor RNC UlIMSTransModeOnHsupa IMS signalling transmission m RNC UlInteractAF UL AF of R99 interactive servic RNC UlInterFreqHoBWThd UL HO maximum bandwidth RNC UlInterFreqHoCellLoadSp UL HO load space threshold RNC UlLdrAMRRateReduction UL LDR-AMR rate reduction RNC

UlLdrAvgFilterLen UL LDR moving average filter l RNC

UlLdrBERateReductionR UL LDR-BE rate reduction RA RNC

UlLdrCreditSfResThd UL LDR credit SF reserved thre RNC UlLdrEighthAction UL LDR eighth action RNC

UlLdrFifthAction UL LDR fifth action RNC

UlLdrFirstAction UL LDR first action RNC

UlLdrFourthAction UL LDR fourth action RNC

UlLdrPsRTQosRenegRab UL LDR un-ctrl RT Qos re-ne RNC

UlLdrRelThd UL LDR release threshold RNC

UlLdrSecondAction UL LDR second action RNC UlLdrSeventhAction UL LDR seventh action RNC

UlLdrSixthAction UL LDR sixth action RNC

UlLdrThirdAction UL LDR third action RNC UlLdrTrigThd UL LDR trigger threshold RNC UlMaxNumOfTfc Uplink Maximum Number of T RNC

UlMeasFilterCoef UL Measurement Filter Coeffici RNC UlMidRateCalc Uplink Mid Bit Rate Calculate RNC

UlMidRateThd Uplink Mid Bit Rate Threshold RNC

UlModeChangeTimerLen UL Mode Change Timer Length RNC UlNonAmrConvAF UL AF of R99 non AMR conv se RNC

UlNonCtrlThdForAMR UL threshold of Conv AMR serv RNC

UlNonCtrlThdForHo UL handover access threshold RNC

UlNonCtrlThdForNonAMR UL threshold of Conv non_AMR RNC UlNonCtrlThdForOther UL threshold of other services RNC

UlOlcAvgFilterLen UL OLC moving average filter l RNC

UlOlcFTFRstrctRabNum UL OLC fast TF restrict RAB n RNC

UlOlcFTFRstrctTimes UL OLC fast TF restrict times RNC

UlOlcMeasFilterCoeff UL overload measure filter coef RNC

UlOlcRelThd UL OLC release threshold RNC UlOlcTraffRelRabNum UL OLC traff release RAB num RNC

UlOlcTrigHyst UL OLC trigger hysteresis RNC

UlOlcTrigThd UL OLC trigger threshold RNC

UlPSInterRatShouldBeH UL PS should be HO user numb RNC

UlPSInterRatShouldNot UL PS should not be HO user n RNC UlQosAmrAdjSwitch Adjustment Switch For AMR Up RNC UlQosAmrInterFreqHoSwit InterFreq HO For Switch For RNC UlQosAmrInterRatHoSwit InterRat HO Switch For Uplin RNC

ULQosMcTimerLen Up Link Qos Measure timer len RNC UlQosVpInterFreqHoSwitc InterFreq HO Switch For Uplin RNC UlQosWAmrAdjSwitch Switch Of WAMR Uplink Rate RNC UlQosWAmrInterFreqHoSw InterFreq HO Switch For Upl RNC UlQosWAmrInterRatHoSwi InterRat HO Switch For Upli RNC UlRateDnAdjLevel Uplink Rate Decrease Adjust Le RNC UlRateUpAdjLevel Uplink Rate Increase Adjust Lev RNC

UlSFTurnPoint UL SF threshold RNC UlSrbActFactor UL AF of SRB RNC UlSRBTransModeOnHsupa SRB transmission mode on HS RNC UlStreamAF UL AF of R99 Streaming servic RNC UlStrThsOnHsupa UL streaming traffic threshold RNC UlStrTransModeOnHsupa Streaming traffic transmissio RNC UlThd6A1 Uplink Event 6A1 Relative Thre RNC

UlThd6A2 Uplink Event 6A2 Relative Thre RNC

UlThd6B1 Uplink Event 6B1 Relative Thre RNC UlThd6B2 Uplink Event 6B2 Relative Thre RNC UlTotalEqUserNum UL total equivalent user number RNC UlTpcStepSize UL closed loop power control st RNC

UlVpTrigTime6A1 Vp Trigger Time 6A1 RNC

UlVpTrigTime6B1 Vp Trigger Time 6B1 RNC

UlVpTrigTime6D Vp Trigger Time 6D RNC

UncertAltitude Cell Center Uncertainty Altitude RNC

UncertAltitudeImp Cell Center Uncertainty Altitude RNC

UncertSemiMajor Cell Center Uncertainty Semi-m RNC

UncertSemiMajorImp Cell Center Uncertainty Semi-m RNC

UncertSemiMinor Cell Center Uncertainty Semi-m RNC

UncertSemiMinorImp Cell Center Uncertainty Semi-m RNC

UNILNKN UNI link No. RNC UpLimitCountingTime Up Limit Counting Time RNC UPPERANI Upper Ani RNC UPPERGRPID Upper Class Transport Resourc RNC UPPERVP The Upper Logical port Number RNC URA1 URA ID 1 RNC URA2 URA ID 2 RNC URA3 URA ID 3 RNC URA4 URA ID 4 RNC URA5 URA ID 5 RNC URA6 URA ID 6 RNC URA7 URA ID 7 RNC URA8 URA ID 8 RNC

URAId URA ID RNC URANUM URA number RNC

UsedFreqCSThdEcN0 Inter-freq CS Used frequency t RNC

UsedFreqCSThdRSCP Inter-freq CS Used frequency RNC

UsedFreqHThdEcN0 Inter-freq H Used frequency tr RNC

UsedFreqHThdRSCP Inter-freq H Used frequency t RNC

UsedFreqMeasQuantityFo 3A Used-Freq Measure Quantity RNC

UsedFreqR99PsThdEcN0 Inter-freq R99 PS Used frequen RNC

UsedFreqR99PsThdRSCP Inter-freq R99 PS Used freque RNC USEFE Use FE or not RNC UseMacehs Mac-ehs use flg RNC USEMP Use MP or not RNC USENBLB2 Use the second Serial Number or RNC

UseOfHcs Use of HCS RNC USEPPP Use PPP or not RNC UserPercentage UserPercentage RNC UserPlnSharingOutOffset Percentage of User Plane Sharin RNC UserPlnSharingOutThd Percentage of User Plane Sharin RNC

UserPriority User Priority RNC USETRUNK Use TRUNK or not RNC UT Rate unit RNC VCI Bearing VCI RNC VCLTYPE VCL act type RNC

VLANFlAG VLANID Flag RNC

VLANID VLAN ID RNC VLANPRI VLAN Priority RNC VOICEDL AMR voice service downlink fac RNC VOICEPRIPATH AMR voice primary path RNC VOICEPRITH AMR voice pri path load thresh RNC VOICESECPATH AMR voice secondary path RNC VOICESECWHT AMR voice pri sec path load rat RNC VOICEUL AMR voice service uplink facto RNC VoipChlType VOIP channel type RNC VoipHsupaTti HSUPA TTI type of VOIP traffi RNC VOL24_MASK Enable Alarm Reporting for 24 RNC VOL24_THD_HIGH Upper Limit of Alarm for 24V RNC VOL24_THD_LOW Lower Limit of Alarm for 24V RNC VOL48_MASK Enable Alarm Reporting for 48 RNC VOL48_THD_HIGH Upper Limit of Alarm for 48V RNC VOL48_THD_LOW Lower Limit of Alarm for 48V RNC

VPCLCXN Cross connect index RNC VPI Bearing VPI RNC VPLimitInd VPLimitInd RNC

VPLimitInd Cell VP limit indicator RNC VPQosPerform QOS Switch For VP Traffic RNC VpRabAbnormRelRatioTh VP drop ratio Per Spu RNC VpRabEstAttMinNum The minimum of VP Rab attempt RNC VpRabEstSuccRatioThd VP Rab successful setup ratio P RNC

VpRabRelMinNum The number of VP drop Per Spu RNC WAmrUlRateAdjTimerLen Wait Timer For WAMR Uplink RNC WATER_MASK Enable Water Alarm Reporting RNC

Weight Weighted factor RNC

WeightForUsedFreq Weight for Used frequency RNC

WINDOWSIZE Receiving window size RNC

WKMODE Work mode RNC WORKAREA Work area flag RNC WORKMODE Work Mode RNC WTRT WTR Time RNC XOffset X Offset RNC ZeroRateUpFailToRelTime Release 0 kbit/s Timer length for RNC ZONET TimeZone RNC

MML Command Description Related Feature ADD AAL2PATH(Mandatory) The type of servic Transmission Resource SET POOLPRIMHOSTPOLICY(Mandatory) Specify Time In Re reliability ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHACTOASCMAP(Optional) It defines the map None ADD PRACHASC(Mandatory) Identifying an ASC None

Address and contro None SET ACALGO(Mandatory) Interval of automat Flow Control SET DSACAUTOALGO(Mandatory) Specifies the inte None SET DSACAUTOALGO(Mandatory) Specifies the restr None

Specifies the inter Flow Control SET ACALGO(Mandatory) Access restriction Flow Control SET ACALGO(Optional) OFF indicates that Flow Control ACT LICENSE(Mandatory) LOCAL:Local Lice None ACT GPS(Mandatory) This parameter indi None STR CPUUSAGETST(Mandatory) CPU usage to be in None SET ADMCTRL(Mandatory) The activity factor Load Control ADD SMLCCELL(Optional) Flag of A-GPS loca LCS SET SMLC(Optional) This parameter ind LCS SET SMLC(Optional) UE positioning mo LCS

This parameter ide None

ADD PPPLNK(Optional) ADD MPLNK(Optional)

SET DSACAUTOALGO(Mandatory) SET ACALGO(Mandatory)

ADD GPS(Mandatory) ACT GPS(Mandatory)

ADD GPS(Mandatory) This parameter ind None ADD CHPWROFFSET(Optional) Difference between Power Control ADD AICH(Optional) Transmission timin Power Control

Alarm ID of the al None SET HSSCCHLESSOPPARA(Mandatory) This parameter spe Radio Bearers ADD RSCGRP(Mandatory) The unit is kbps. Transmission Resource ADD CELLHSDPA(Optional) If Manual is chose HSDPA ADD GPS(Mandatory) This parameter ind None ADD GPS(Mandatory) This parameter ind None SET ALMLVL(Mandatory) New alarm level to None

SET ALMLVL(Mandatory) SET BOXRPT(Mandatory) SET ALMPORT(Optional)

Inter-Frequency Handov


Inter-RAT Handover

Inter-RAT Handover ADD TYPRABRLC(Mandatory) This parameter spec Radio Bearers SET QOSACT(Optional) When the parameter AMRC, AMRC-WB SET KPIALMTHD(Optional) AMR drop ratio Per None SET KPIALMTHD(Optional) The number of AMR None SET KPIALMTHD(Optional) AMR Rab successful None SET KPIALMTHD(Optional) The number of AMR None SET QOSACT(Optional) AMRC LOP VCL(Mandatory) Adjacent node ID. None ACT IPPM(Mandatory) This parameter ind None ACT VCLCC(Mandatory) This parameter indi IP RAN

ADD CELLINTERFREQHOCOV(Optional) SET INTERFREQHOCOV(Optional)

handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored. After the maximum number of times for event

ADD CELLINTERFREQHONCOV(Optional) SET INTERFREQHONCOV(Optional)

value of this parameter, the larger the number of times for inter-frequency handover retry, and the higher probability for the UE to be successfully handed over to the target cell whose load is restored.

ADD CELLINTERRATHOCOV(Optional) SET INTERRATHOCOV(Optional)

parameter, the larger the number of times for inter-RAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose

ADD CELLINTERRATHONCOV(Optional) SET INTERRATHONCOV(Optional)

parameter, the larger the number of times for inter-RAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose

If no measurement report is received

ID of the adjacent IP RAN,Transmission ADD SMLCCELL(Optional) Altitude of the ce LCS ADD SMLCCELL(Optional) Altitude of the ce LCS ADD SMLCCELL(Optional) LCS ADD SMLCCELL(Optional) LCS ADD SMLCCELL(Optional) LCS ADD SMLCCELL(Optional) Longitude of the c LCS ADD SMLCCELL(Mandatory) Coverage angle of a LCS ADD SMLCCELL(Mandatory) Azimuth of the main LCS ADD NRNCCELL(Optional) Access point(AP) ce Intra-Frequency Handov ADD SCTPLNK(Mandatory) Upper-layer applic None ADD TYPRABBASIC(Mandatory) This parameter spe None LOD PATCH(Optional) This parameter ide None SYN BRDAREA(Optional) Flag area. None SET USERPRIORITY(Optional) User_priority corr Load Control SET USERPRIORITY(Optional) User_priority corr Load Control SET USERPRIORITY(Optional) User_priority corr Load Control SET USERPRIORITY(Optional) User_priority corr Load Control SET USERPRIORITY(Optional) User_priority corr Load Control SET USERPRIORITY(Optional) User_priority corre Load Control

ADD ADJNODE(Mandatory) ADD AAL2PATH(Mandatory) ADD AAL2RT(Mandatory) ADD ADJMAP(Mandatory) ADD IPPATH(Mandatory) ADD IPPATHBIND(Mandatory)

corresponding to the latitude 31 degrees 30 ddd:mm:ss.ssss.This is controlled by GCDF and corresponding to the longitude 121 degrees 40

SET USERPRIORITY(Optional) User_priority corre Load Control SET USERPRIORITY(Optional) User_priority corre Load Control SET USERPRIORITY(Optional) User_priority corre Load Control SET USERPRIORITY(Optional) User_priority corre Load Control SET USERPRIORITY(Optional) User_priority corre Load Control SET USERPRIORITY(Optional) User_priority corre Load Control

SET USERPRIORITY(Optional) Load Control SET USERPRIORITY(Optional) User_priority corre Load Control STR IPCHK(Optional) ARP packet resend IP RAN STR IPCHK(Optional) ARP packet out-ti IP RAN STR NODEBBWRPT(Mandatory) This parameter spe None ADD NODEBIP(Mandatory) Number of the slot None ADD NODEBIP(Mandatory) Number of the subr None ADD CNDOMAIN(Optional) Indicating whethe UE Behaviors in Idle M

Validate protocol None

User name for the None

Password for the P None

User_priority corresponding to Allocation/Retention priority 8.

ADD PPPLNK(Mandatory) ADD MPGRP(Mandatory)



Validate protocol t None SET ETHPORT(Optional) None ADD PRACHASC(Optional) Identifying the av None ADD PRACHASC(Optional) Identifying the ava None ADD PRACHASC(Optional) Identifying the ava None ADD CNNODE(Mandatory) The Capability of Iu Flex SET ALMPORT(Optional) This parameter spec None SET CLK(Optional) This parameter spe None SET CLK(Optional) This parameter spe None ADD CELLCAC(Optional) If [Auto-Adaptive Load Control BKP DB(Optional) The full path of b None STR IPCHK(Optional) Backup port IP add IP RAN STR IPCHK(Optional) Backup port mask IP RAN ADD EMSIP(Optional) This parameter ind None ADD EMSIP(Optional) This parameter ind None

Indicating the sele Inter-RAT Handover SET FACHBANDWIDTH(Optional) This parameter spe Load Control ADD GSMCELL(Mandatory) Uniquely identifyin Inter-RAT Handover ADD GSMCELL(Mandatory) Inter-RAT Handover ADD CELLEFACH(Optional) This parameter sp HSPA+ ADD CELLEFACH(Optional) This parameter sp HSPA+ ADD BCH(Optional) Offset of the BCH Power Control ADD N7DPC(Mandatory) Indicating the be None

ADD PPPLNK(Optional) ADD MPGRP(Optional)

DISABLE is selected, that is,

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD GSMCELL(Optional) ADD NRNCCELL(Mandatory)

number: (511-866)GSM900Frequency

SET USERGBR(Mandatory) Iub Overbooking, HSD SET HOCOMM(Optional) The bit rate thresh Intra-Frequency Handov SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tra DCCC SET QOSACT(Optional) The first action se DCCC SET QOSACT(Optional) The second action DCCC SET QOSACT(Optional) The third action s DCCC SET UESTATETRANSTIMER(Optional) Timer for state tra DCCC

SET UESTATETRANS(Optional) This parameter spe DCCC SET UESTATETRANS(Optional) This parameter spe DCCC


This parameter specifies the bearer type of the service.- R99: The service is carried on a non-HSPA channel.- HSPA: The service is carried on an HSPA channel.

SET UESTATETRANS(Optional) This parameter spe DCCC SET UESTATETRANS(Optional) This parameter spe DCCC SET UESTATETRANS(Optional) This parameter spe DCCC SET UESTATETRANS(Optional) This parameter spe DCCC


SET UESTATETRANS(Optional) Upper threshold fo DCCC SET UESTATETRANS(Optional) Time to trigger th DCCC SET UESTATETRANS(Optional) Traffic volume 4a DCCC SET UESTATETRANS(Optional) Time to trigger th DCCC

SET UESTATETRANS(Optional) Upper threshold fo DCCC SET UESTATETRANS(Optional) Time to trigger th DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANS(Optional) Pending time after DCCC

SET UESTATETRANS(Optional) This parameter is DCCC SET UESTATETRANS(Optional) When the traffic vo DCCC SET FRC(Optional) This parameter spe HSUPA SET QOSACT(Optional) Timer for rejecting DCCC

The ralative power DCCC SET QOSACT(Optional) When the parameter DCCC ADD TYPRABBASIC(Mandatory) This parameter spec Power Control ADD TYPRABBASIC(Mandatory) This parameter spe Power Control SET QOSACT(Optional) The first action se DCCC SET QOSACT(Optional) The second action DCCC SET QOSACT(Optional) The third action s DCCC SET QOSACT(Optional) For BE service, W DCCC SET QOSACT(Optional) Event 5A measureme DCCC SET QOSACT(Optional) Event 6A1 measurem DCCC SET QOSACT(Optional) UL event 6D measur DCCC SET QOSACT(Optional) DCCC STR IPCHK(Optional) Detect multiplier IP RAN ADD CELLEFACH(Optional) Guaranteed rate o HSPA+ ADD CELLEFACH(Optional) Maximum rate of HSPA+

ADD CELLCAC(Optional) This parameter is Load Control ADD CELLCAC(Optional) Only when the meas Load Control

ADD CELLCAC(Mandatory) This parameter, alo Load Control ADD CELLCAC(Optional) When the number of Load Control

ADD CELLDCCC(Optional) SET DCCC(Optional)

acknowledgement after UL rate adjustment.

ADD CELLCAC(Mandatory) This parameter, alo Load Control ADD CELLCAC(Optional) When the parameter Load Control

ADD CELLCAC(Optional) The difference of R Load Control ADD TYPRABOLPC(Mandatory) This parameter spe Power Control

Inter-RAT Handover,Int SET INTRAFREQHO(Optional) This parameter is Inter-Frequency Handov SET INTRAFREQHO(Optional) This parameter spe Inter-Frequency Handov ADD GSMNCELL(Mandatory) Inter-RAT Handover ADD INTERFREQNCELL(Optional) Inter-Frequency Handov

Inter-Frequency Handov SET AAL2TMR(Optional) This timer is star None SET BOXRPT(Mandatory) New Report to Alar None ADD BRD(Mandatory) This parameter indi None ADD BRD(Optional) This parameter indi None SET ETHPORT(Mandatory) Type of the board. None ADD PPPLNK(Mandatory) Board type. None ADD MPLNK(Mandatory) Board type. None

ADD GSMNCELL(Optional) ADD INTERFREQNCELL(Optional)

handover, so blind handover to this cell cannot be

neighboring cells, which can ensure successful neighboring cells of the same coverage.

ADD CELLINTRAFREQHO(Optional) SET INTRAFREQHO(Optional)

event 1F, exceeds the specified threshold. Otherwise, the report will be discarded.This parameter is set to raise the possibility of

Inter-RAT Handover ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover SET E1T1LOP(Mandatory) Type of the board. None LOP E1T1(Mandatory) Type of the board. None STR E1T1TST(Mandatory) Type of the board. IP RAN LOD PATCH(Mandatory) This parameter ind None SET CLK(Mandatory) This parameter spec None SET E1T1(Mandatory) Type of the board. None SET CPUTHD(Mandatory) This parameter spec None ADD IMAGRP(Mandatory) Type of the board. None SET OPT(Mandatory) This parameter indi None ADD ATMLOGICPORT(Optional) Board type. Transmission Resource ADD IPLOGICPORT(Optional) Automatic bandwidt Transmission Resource

If the available ba Transmission Resource

ADD CELLINTERRATHONCOV(Optional) ADD CELLINTERRATHOCOV(Optional) SET INTERRATHONCOV(Optional) SET INTERRATHOCOV(Optional)

the measured cell is deciphered correctly; when the value is NOT_REQUIRE, measurement reporting is triggered whatever the BSIC is deciphered or not, if the measured cell meets the reporting conditions. This parameter is valid for both periodical report mode and event report mode. To ensure the the BSIC is deciphered or not, if the measured

ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD FRALNK(Optional) ADD UNILNK(Optional) ADD MPGRP(Optional)

ADD IPLOGICPORT(Optional) Remaining bandwid Transmission Resource ADD ATMLOGICPORT(Optional) Backward congesti Transmission Resource ADD AAL2PATH(Optional) If the available ba Transmission Resource ADD IPPATH(Optional) If the available ba Transmission Resource ADD RSCGRP(Optional) If the available ba Transmission Resource

If the available ba Transmission Resource ADD IPLOGICPORT(Optional) Cleared remaining Transmission Resource ADD ATMLOGICPORT(Optional) Backward congestio Transmission Resource ADD AAL2PATH(Optional) If the available ba Transmission Resource ADD IPPATH(Optional) If the available ba Transmission Resource ADD RSCGRP(Optional) If the available ba Transmission Resource

ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD FRALNK(Optional) ADD UNILNK(Optional) ADD MPGRP(Optional)

Reserved backward Transmission Resource ADD IPLOGICPORT(Optional) Reserved bandwidt Transmission Resource ADD ATMLOGICPORT(Optional) Backward handover Transmission Resource ADD AAL2PATH(Optional) Reserved backward Transmission Resource ADD IPPATH(Optional) Reserved backward Transmission Resource ADD RSCGRP(Optional) Reserved backward Transmission Resource ADD IPLOGICPORT(Optional) Maximum estimated Transmission Resource ADD RSCGRP(Mandatory) Bandwidth mode.Th Transmission Resource ADD IPLOGICPORT(Optional) Bandwidth change t Transmission Resource

ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD UNILNK(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional)

SET CACALGOSWITCH(Optional) Load Control

SET CALLSHOCKCTRL(Optional) Indicating whether None SET CALLSHOCKCTRL(Optional) Indicating the peri None SET USERPRIORITY(Optional) Decide which carri Load Control ADD AAL2PATH(Mandatory) Number of the sub Transmission Resource ADD IPPATH(Optional) This field indicate Transmission Resource

The number of the Transmission Resource ADD ATMLOGICPORT(Optional) FRAATM link No w Transmission Resource

The parameter values are described as follows: NODEB_CREDIT_CAC_SWITCH: The system performs CAC based on the usage state of NodeB credit. When the NodeB's credit is not enough, the system rejects new access requests.

ADD IPOAPVC(Optional) ADD SAALLNK(Mandatory) ADD AAL2PATH(Mandatory)

The number of the Transmission Resource ADD ATMLOGICPORT(Optional) IMA group No wher Transmission Resource

SAAL, SCTP, SAAL- IP RAN

Number of the por Transmission Resource ADD ATMLOGICPORT(Optional) Optical port No wh Transmission Resource

Number of the slot Transmission Resource ADD SAALLNK(Mandatory) Number of the sub None ADD IPLOGICPORT(Mandatory) This parameter indi Transmission Resource ADD ATMLOGICPORT(Mandatory) Logical port bear Transmission Resource


ADD NCP(Mandatory) ADD CCP(Mandatory)

ADD IPOAPVC(Mandatory) ADD AAL2PATH(Mandatory) ADD SAALLNK(Mandatory)

ADD AAL2PATH(Mandatory) ADD SAALLNK(Mandatory)

Type of the bearer. Transmission Resource

Number of the UNI Transmission Resource ADD ATMLOGICPORT(Optional) UNI link No where Transmission Resource

ADD AAL2PATH(Mandatory) ADD SAALLNK(Mandatory) ADD IPOAPVC(Mandatory)


The value of beari None

The value of beari None

Number of the bear Transmission Resource ADD CBSADDR(Mandatory) IP address of the None ADD CBSADDR(Mandatory) Mask of the sub-ne None ADD IPLOGICPORT(Optional) Maximum burst siz Transmission Resource ADD QUICKCELLSETUP(Mandatory) A CBS Operator of None ADD CELLCBSSAC(Mandatory) Together with PLM CBS ADD QUICKCELLSETUP(Mandatory) CBS service area w None SET RNCCBPARA(Optional) switch of the funct CBS ADD CELLEFACH(Optional) Guaranteed rate o HSPA+

ADD SAALLNK(Mandatory) ADD IPOAPVC(Optional)

ADD SAALLNK(Mandatory) ADD IPOAPVC(Optional)

ADD IPOAPVC(Mandatory) ADD SAALLNK(Mandatory) ADD AAL2PATH(Mandatory)

ADD CELLEFACH(Optional) Maximum rate of HSPA+ ADD TRMMAP(Optional) Common channel p Transmission Resource ADD LOADEQ(Optional) Common channel be Transmission Resource ADD TRMMAP(Optional) Common channel se Transmission Resource ADD LOADEQ(Optional) Common channel pri Transmission Resource ADD ETHMA(Optional) This parameter spe None ACT VCLCC(Optional) This parameter ind None

ADD SAALLNK(Optional) Protection timer s None ADD ATMTRF(Optional) This parameter indi None SET CALLSHOCKCTRL(Optional) When call shock s None ADD SMLCCELL(Optional) Average altitude LCS ADD SMLCCELL(Optional) This parameter spe LCS

ADD CELLALGOSWITCH(Optional) Load Control

ADD NRNCCELL(Mandatory) SRNS Relocation, HS ADD SMLCCELL(Optional) Altitude of the c LCS

ON_TO_OFF:When TX Diversity is on to off,the algorithms of cell capacity auto handle is open.TX_DIVERSITY_OFF_TO_ON:WhTRUE, it means that the cell has E-DCH SF capability of 2SF4.9)EDCH_SF4_SUPPORT(E-DCH max SF support SF4 indicator):when the indicator is TRUE, it means that the cell has E-DCH SF capability of SF4.10)EDCH_SF8_SUPPORT(E-DCH max SF support SF8 indicator):when the indicator is TRUE, it means that the cell has E-DCH SF capability of SF8.11)EDCH_HARQ_IR_COMBIN_SUPPORT(E-DCH support HARQ IR Combining indicator):when the indicator is TRUE, it means that the cell use IR

ADD SMLCCELL(Optional) This parameter spe LCS ADD SMLCCELL(Optional) LCS ADD SMLCCELL(Optional) This parameter spe LCS ADD SMLCCELL(Optional) LCS

ADD SMLCCELL(Optional) LCS HO CELL(Mandatory) Indicating the targ None ADD SMLCCELL(Optional) Environment type o LCS ADD CELLCAC(Optional) Defining the radio Load Control

ADD SMLCCELL(Optional) LCS

value corresponding to

value corresponding to

This parameter specifies the longitude of the cell center in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss.This is controlled by GCDF and valid when SEC~1(degree, minute, second format).

Deviation of altitude standard in the cell coverage area in the WGS-84 coordinates.This is controlled by MTRLGY and valid when MET~0(metric system).

ADD SMLCCELL(Optional) LCS SET CALLSHOCKCTRL(Optional) When call shock st None ADD NRNCCELL(Optional) This parameter spec None ADD CELLLDB(Mandatory) Uniquely identifyin Load Control

This parameter specifies the standard deviation of altitude in the cell coverage area in the WGS-84 coordinates.This is controlled by MTRLGY and valid when IMP~1(British measurement).

Uniquely identifyin AMRC-WB,DCCC,AMRC,LC SET MRSCOPECTRL(Mandatory) Cell ID. None SET CIDCHG(Optional) This parameter is None SET CIDCHG(Optional) Indicating whether None ADD SMLCCELL(Optional) Flag of CELLID+RT LCS SET SMLC(Optional) UE positioning m LCS ADD CELLLDR(Optional) Cell SF reserved th Load Control, HSDPA ADD SMLCCELL(Mandatory) Cell location confi LCS

Identifying a cell None

ADD CELLQUALITYMEAS(Mandatory) ADD CELLHCSHO(Mandatory) ADD NRNCCELL(Mandatory) HO CELL(Mandatory) ADD CELLEFACH(Mandatory) ADD CELLDYNSHUTDOWN(Mandatory) BLK CELL(Mandatory) ADD CELLMBMSSA(Mandatory) ADD CELLMCCH(Mandatory) ADD CELLHSUPA(Mandatory) ADD CELLHSDPA(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD CELLSIBSWITCH(Mandatory) ADD PRACHASC(Mandatory) ADD CHPWROFFSET(Mandatory) ADD PSCH(Mandatory) ADD SSCH(Mandatory) ADD PCPICH(Mandatory) ADD PCCPCH(Mandatory) ADD BCH(Mandatory) ADD SCCPCHBASIC(Mandatory) ADD SCCPCHTFC(Mandatory) ADD PICH(Mandatory) ADD FACH(Mandatory) ADD FACHDYNTFS(Mandatory) ADD FACHLOCH(Mandatory) ADD PCH(Mandatory) ADD PCHDYNTFS(Mandatory) ADD PRACHBASIC(Mandatory) ADD PRACHTFC(Mandatory) ADD PRACHSLOTFORMAT(Mandatory) ADD RACH(Mandatory) ADD RACHDYNTFS(Mandatory) ADD AICH(Mandatory)

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD NRNCCELL(Mandatory)

ADD CELLLDB(Optional) If the cell downlin Load Control SET UESTATETRANS(Optional) If the times the U DCCC SET UESTATETRANSTIMER(Optional) Length of the cell URA Update, Cell Upd ADD CELLACCESSSTRICT(Optional) Indicating whether UE Behaviors in Idle M ADD CELLACCESSSTRICT(Optional) Indicating whether UE Behaviors in Idle M ADD INTRAFREQNCELL(Optional) Intra-Frequency Handov ADD INTRAFREQNCELL(Optional) Intra-Frequency Handov SET CALLSHOCKCTRL(Optional) When the RRC REQ t None

ADD CELLLDB(Optional) If the cell downlin Load Control

This parameter ind None

relative threshold of the event 1A NOT_AFFECT: relative threshold of the event 1B NOT_AFFECT:

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory)

SET CORRMALGOSWITCH(Optional) DCCC, AMRC, AMRC-WB, SET COIFTIMER(Optional) This parameter spec HSDPA, HSUPA SET COIFTIMER(Optional) After a traffic is s HSDPA, HSUPA ADD FACH(Optional) The coding type of Channel Description ADD IPPATH(Optional) IP Path Ping Timeo IP RAN SET MBMSPERF(Mandatory) Channel index fo MBMS Service ADD IPPATHBIND(Mandatory) This parameter spec None STR IPCHK(Optional) This parameter indi None ADD SCTPLNK(Optional) Whether to calcula None ADD SCTPLNK(Optional) Whether to calcula None ADD SCTPLNK(Optional) According to RFC4 None STR IPCHK(Mandatory) IP check type. IP RAN

If you set this pa Load Control, Iub Satell




6) CFG_IMS_SUPPORT_SWITCH: When the switch is selected and the IMS license is activated, the RNC supports IMS signaling. 7) CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITCH: When the switch is selected, DL lossless RLC PDU size change is supported.8) CFG_LOSSLESS_RELOC_CFG_SWITCH: When the switch is selected and the UE supports lossless relocation, the RNC configures lossless relocation for PDCP parameters if the requirements of RLC mode, discard mode, and sequential

SET LDM(Optional) SET SATLDM(Optional)




SET LDM(Optional) If you set this pa Load Control

Load Control, Iub Satell


This parameter spe AMRC, AMRC-WB

This parameter spec DCCC

This parameter spec DCCC

This parameter spec Inter-Frequency Handov SET MBMSPERF(Mandatory) MBMS performance MBMS Service ADD GSMCELL(Mandatory) Identifying a GSM Inter-RAT Handover ADD GSMCELL(Optional) Inter-RAT Handover


measurement report period. If you set this parameter to MIN, SET LDM(Optional)

SET SATLDM(Optional)

ADD CELLQUALITYMEAS(Optional) SET QUALITYMEAS(Optional)




handover priority of the GSM cell.

This parameter work Intra-Frequency Handov ADD GSMNCELL(Optional) Inter-RAT Handover

Inter-Frequency Handov ADD IPLOGICPORT(Mandatory) Bandwidth of the lo Transmission Resource SET CLKTYPE(Mandatory) This parameter spec None ADD CELLSETUP(Optional) Indicating whether None ADD NODEBLMTPARA(Optional) None

Inter-Frequency Handov SET CORRMALGOSWITCH(Optional) Inter-Frequency Handov SET STATETIMER(Optional) A timer to SRNC wa None

ADD CELLSETUP(Optional) ADD NRNCCELL(Optional)

handover. The larger the value of

ADD INTERFREQNCELL(Optional) ADD INTRAFREQNCELL(Optional)

functions in combination of the cell oriented CIO. Their sum is added to the

- DL_ONLY: The NodeB supports

ADD CELLCMCF(Optional) SET CMCF(Optional)

D_AND_MEDIUM_COVERAGE_CELL,HIGH_SPEED_AND_MEDIUM_COVERAGE_CELL,LOW_SPEED_AND_HIGH_COVERAGE_CELL,HIGH_SPEED_AND_HIGH_COVERAGE_CELL,PICO_NODEB_TYPE_COVERAGE_CELL,OTHErequired by current traffic.

SET CORRMALGOSWITCH(Optional) Intra-Frequency Hando

Identifying the typ None

_SWITCH: This switch is set for compatibility with the UE that does not support the change of the serving cell accompanied with the reconfiguration of the target service link D2E. When the switch is enabled, the change of the serving cell accompanies the reconfiguration of the target service link D2E. When the switch is disabled, the serving cell is changed after the UE completes the reconfiguration of the target service link D2E. The switch is used in only R6 and later versions.7) CMP_UU_IGNORE_UE_RLC_CA

ADD CNDOMAIN(Mandatory) ADD CELLRLPWR(Mandatory) ADD TYPRABBASIC(Mandatory) ADD CNNODE(Mandatory) RST IURESOURCE(Mandatory) RST IU(Mandatory)

Identifying a CN n None ADD CNNODE(Mandatory) The status of the Iu Flex ADD ADJMAP(Mandatory) Mode of resource RAN Sharing ACT LICENSE(Optional) Cn Operator Index. None ADD CNOPERATOR(Mandatory) Uniquely identifyi RAN Sharing ADD CNOPERGROUP(Mandatory) Identify a Operato None

This parameter spec Inter-Frequency Handov ADD CNOPERGROUP(Mandatory) Uniquely identifyi None ADD NRNCURA(Mandatory) Indicating a Cn Op RAN Sharing

Cn Operator index. RAN Sharing,Transmis ADD CNOPERGROUP(Mandatory) Cn Operator 1 inde None ADD CNOPERGROUP(Mandatory) Cn Operator 2 inde None ADD CNOPERGROUP(Mandatory) Cn Operator 3 inde None ADD CNOPERGROUP(Mandatory) Cn Operator 4 inde None ADD CNOPERGROUP(Optional) Common Operator None ADD CNOPERGROUP(Mandatory) Identify operator None ADD CNNODE(Mandatory) CN protocol versio None ADD CELLHSDPA(Optional) Code reshuffle swi Load Control ADD CELLHSDPA(Optional) H-based code tree r Load Control

This parameter spec Load Control

ADD CNNODE(Mandatory) SET IUTIMERANDNUM(Mandatory) ADD NRIGLBCNIDMAP(Mandatory) ADD IMSIIDNNSCNIDMAP(Mandatory) RST IU(Mandatory) RST IURESOURCE(Mandatory)

ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD CELLSETUP(Mandatory)

ADD NRIGLBCNIDMAP(Mandatory) ADD IMSIIDNNSCNIDMAP(Mandatory)

SET DRD(Optional) ADD CELLDRD(Optional)


Load Control ADD CELLLDR(Optional) Load Control SET RNCCBPARA(Optional) the message code CBS

Inter-Frequency Handov SET RNCMBMSPARA(Optional) For a PTM service, MBMS Service

The ralative power DCCC



This parameter specifies whether the code balancing DRD algorithm will be applied.- ON: The code balancing DRD algorithm will be applied.- OFF: The code balancing DRD algorithm will not be applied.

coverage, if code resources present

ADD CELLHOCOMM(Optional) SET HOCOMM(Optional)

event 2D/2F measurement thresholds for inter-RAT measurement.When you set the previous parameters, consider the following factors: event 2D/2F measurement thresholds for


SET OPERATORSHARINGMODE(Optional) MOCN ADD SAALLNK(Optional) Timer T1.Interval b None ADD SAALLNK(Optional) Timer T2.Total ti None ADD SAALLNK(Optional) Timer T3.Time be None ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t None ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of th Transmission Resource ADD CELLACCESSSTRICT(Mandatory) Indicating whether UE Behaviors in Idle M SET DRD(Optional) Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether UE Behaviors in Idle M ADD SUBRACK(Optional) This parameter spe None

When Send Message To IU Interface,Whether Use Common Plmn ID.Only when support MOCN,We need input.

RRC redirection to inter-frequency

ADD CELLSELRESEL(Optional) URA Update, Cell Upda

cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handovers, the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow

ADD CELLSELRESEL(Optional) URA Update, Cell Upda

the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handovers, the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4

UE Behaviors in Idle M


mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12 message is existing.Offset of neighboring cell CPICH measurement value. This parameter is used for RSCP measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection.In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the Radio Network Planner(RNP)

UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Threshold for inter UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Threshold for intra UE Behaviors in Idle M ADD CELLACCESSSTRICT(Optional) This parameter is UE Behaviors in Idle M ADD PRACHBASIC(Optional) It is used to calc Power Control RST IUR(Mandatory) Context type of the None PING IP(Optional) This parameter spe None SET USERMBR(Optional) This parameter spe Transmission Resource SET USERMBR(Optional) This parameter spe Transmission Resource ADD CELLEFACH(Optional) Guaranteed rate o HSPA+ ADD CELLEFACH(Optional) Maximum rate of t HSPA+

Maximum rate of t AMRC-WB


mode. ConnQoffset1sn and ConnQoffset2sn are valid only when SIB12Ind = TRUE, namely, the SIB12 message is existing.Offset of neighboring cell CPICH measurement value. This parameter is used for Ec/No measurement. The offset is subtracted from the neighboring cell measurement value before cell reselection.In cell reselection algorithm, this parameter is used for moving the border of a cell. This parameter can be configured by the Radio Network Planner(RNP)

ADD CELLAMRCWB(Optional) SET AMRCWB(Optional)

Maximum rate of t AMRC PING MAC(Optional) This parameter spe None SET CNTCHK(Mandatory) Count-C checking Data Integrity Protectio SET CNTCHK(Optional) Counter check swit Data Integrity Protectio

This parameter ind None SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers ADD CELLHCS(Optional) Maximum number of UE Behaviors in Idle M ADD SCTPLNK(Optional) This field indicate None ADD TRMFACTOR(Optional) R99 CS conversatio Iub Overbooking ADD TRMMAP(Optional) R99 CS conversatio Transmission Resource ADD LOADEQ(Optional) R99 CS conversatio Transmission Resource ADD TRMMAP(Optional) R99 CS conversatio Transmission Resource ADD LOADEQ(Optional) R99 CS conversatio Transmission Resource ADD TRMFACTOR(Optional) R99 CS conversatio Iub Overbooking ACT LICENSE(Optional) The total Voice Erl None

Inter-RAT Handover SET OPERATORCFGPARA(Optional) Indicating whether Iu Flex SET OPERATORCFGPARA(Mandatory) Cs Information Upd Iu Flex

ADD CELLAMRC(Optional) SET AMRC(Optional)



threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldInd] in SET INTERRATHONCOV is set to ON, the CS domain inter-system relocation out process will be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the CS domain Reloc

SET OPERATORCFGPARA(Optional) CS NRI(Network Res Iu Flex, Mocn SET OPERATORCFGPARA(Mandatory) NRI length for CS Iu Flex, Mocn SET DSACAUTOALGO(Mandatory) Whether to impose None ADD CELLHOCOMM(Optional) Inter-RAT Handover ADD TRMFACTOR(Optional) R99 CS streaming s Iub Overbooking ADD TRMMAP(Optional) R99 CS streaming Transmission Resource ADD LOADEQ(Optional) R99 CS streaming b Transmission Resource ADD TRMMAP(Optional) R99 CS streaming Transmission Resource ADD LOADEQ(Optional) R99 CS streaming p Transmission Resource ADD TRMFACTOR(Optional) R99 CS streaming s Iub Overbooking SET CORRMALGOSWITCH(Optional) AMRC, AMRC-WB

SET FRCCHLTYPEPARA(Optional) Radio Bearers, HSDPA SET FRC(Optional) This parameter spe AMRC, AMRC-WB, HS SET FRC(Optional) This parameter spe AMRC, AMRC-WB, HS SET FRC(Optional) This parameter spe AMRC, AMRC-WB, HS ADD NRNC(Optional) Indicating whethe Flow Control

Uniquely identifyi None

Calculated TFC (CT None SET CTRLPLNSHAREPARA(Optional) The sharing offset Flow Control SET CTRLPLNSHAREPARA(Optional) Forwarding thresho Flow Control ADD RSCGRP(Mandatory) Number of the MPU Transmission Resource SET CMCTRLSW(Mandatory) Rollback control fl None ADD VPCLCX(Mandatory) This parameter spe None ADD CZ(Mandatory) Uniquely identifyi LCS

inter-RAT handover are

RB, TrCH, and PhyCH, which are

Indicating the channel type of CS speech service.-DCH: Both uplink and downlink are beared on DCH.-HSPA:Uplink is beared on E-DCH, downlink beared on HS-DSCH.

ADD SCCPCHTFC(Mandatory) ADD PRACHTFC(Mandatory)

ADD SCCPCHBASIC(Optional) ADD PRACHBASIC(Optional)

SET UESTATETRANS(Optional) This parameter is u DCCC SET UESTATETRANS(Optional) Pending time after DCCC SET UESTATETRANS(Optional) When the traffic vo DCCC SET DCCC(Optional) After the 1A measur DCCC

SET INTRAFREQHO(Optional) Intra-Frequency Handov SET DCCC(Optional) Strategy for adju DCCC SET DCCC(Optional) Length of the pena DCCC

fails to join the active again, the RNC starts the penalty timer for SHO failure. This parameter defines the length of the penalty timer. Before the timer expires, the rate increasing in the active set is prohibited, but rate reduction is not prohibited. Such penalty strategy is applied in the following scenario:If there is a cell, for some reason, it has high signal strength but heavy load, and cannot join the active set throughout by then. This cell may enter the SHO rate reduction evaluation process repeatedly, which results in rate reduction in the active set. If the

SET DCCC(Optional) This parameter spe DCCC ADD TYPRABDCCCMC(Optional) This parameter spe DCCC ADD TYPRABDCCCMC(Optional) This parameter spe DCCC SET SUBNET(Optional) RNC internal debu None SET OPERATORSHARINGMODE(Optional) Default Operator MOCN SET FRC(Optional) Power Control ADD CELLCAC(Optional) When the RNC is pe Load Control ADD IMAGRP(Optional) Max diff delay be None SET POOLPRIMHOSTPOLICY(Mandatory) Delay Time Length reliability ADD TYPRABOLPC(Mandatory) This parameter spec Radio Bearers ADD TYPRABRLC(Mandatory) This parameter spec None SET DRD(Optional) This parameter spe Load Control

Actual minimum re UE Behaviors in Idle M

M3UA destination e IP RAN PING IP(Mandatory) This parameter spec None TRC IPADDR(Mandatory) Destination IP add None

power offset, Primary CPICH

ADD CELLSELRESEL(Mandatory) ADD NRNCCELL(Mandatory)

ADD M3DE(Mandatory) ADD M3RT(Mandatory) ADD M3LKS(Mandatory)

This parameter spe None ADD GPS(Optional) This parameter ind None

ADD TYPRABDCCCMC(Mandatory) DCCC SET HOCOMM(Optional) Intra-Frequency Handov SET ADMCTRL(Optional) DL activity factor Load Control

Duration from when AMRC, AMRC-WB SET ADMCTRL(Optional) DL activity factor Load Control

L3 filtering coeffi Load Control, Iub Satell SET FRC(Optional) This parameter spe None

PING MAC(Mandatory) TRC MAC(Mandatory)

This parameter specifies the direction that the traffic volume measurement is applicable to. - DOWNLINK: indicates downlink traffic volume measurement. - UPLINK: indicates uplink traffic volume measurement or E-DCH throughput measurement.

combination according to its own physical



This parameter spec Radio Bearers SET FRC(Optional) DL BE traffic Initi Load Control, DCCC SET FRCCHLTYPEPARA(Optional) This parameter spe Radio Bearers, HSDPA

Duration from when DCCC

Duration within whi DCCC

Length of smoothi Load Control, Iub Satell ADD CELLCAC(Optional) Different admissio Load Control

ADD CELLCAC(Optional) Admission threshold Load Control ADD NODEBLMTPARA(Optional) None

SET FRCCHLTYPEPARA(Optional) ADD CELLFRC(Optional)




HIGHER_LAYER_SCHDL: higher layer scheduling

ADD RESERVEOVSF(Mandatory) Number of the DL Load Control

ADD CELLCAC(Optional) The percentage of Load Control

ADD CELLCAC(Optional) The percentage of t Load Control

Number of users se Load Control


SET DCCC(Optional) For a BE service t DCCC

ADD CELLLDR(Optional) ADD NODEBLDR(Optional)


Maximum DL rate du DCCC SET USERGBR(Optional) This parameter spe Load Control, DCCC

ADD CELLCAC(Optional) Some cell resource Load Control


ADD CELLCAC(Optional) Load Control ADD CELLCAC(Optional) Reserved DL power Load Control SET ADMCTRL(Optional) DL activity factor Load Control ADD CELLLDR(Optional) Load Control ADD CELLLDR(Optional) The inter-frequenc Load Control ADD CELLLDR(Optional) The mechanism of t Load Control

Length of smoothi Load Control, Iub Satell

Number of RABs sele Load Control

accessed. If the DL load of a cell is higher than this threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be used to limit the proportion between the non-handover service, handover user and other services in a specific cell, and to guarantee the access priority of

value of the parameter gives rise to the



Reserved SF thresh Load Control ADD CELLLDR(Optional) This parameter has Load Control

This parameter has Load Control

Load Control




the minimum power.CODEADJ (code tree reshuffling): The fragments of the downlink code tree are arranged.PSINTERRATSHOULDNOTBELDHO: The inter-RAT SHOULDNOTBE load handover of the CS domain is performed.PSINTERRATSHOULDNOTLDHO: The inter-RAT SHOULDNOTBE load handover of the PS domain is performed.The LDR takes the actions in the preset sequence and judges whether each action is successful. If an action is unsuccessful, the LDR turns to the next action. If an action is successful, a

This parameter has Load Control ADD CELLLDR(Optional) This parameter has Load Control

Number of RABs sel Load Control

ADD CELLLDM(Optional) If the ratio of DL Load Control






This parameter has Load Control ADD CELLLDM(Optional) If the ratio of DL Load Control ADD CELLLDM(Optional) If the DL load state Load Control ADD NODEBLMTPARA(Optional) This parameter spe None ADD CELLCAC(Optional) Reserved DL power Load Control

Smooth filtering co DCCC, AMRC, AMRC SET DCCC(Optional) This parameter det DCCC




SET DCCC(Mandatory) Threshold of the D DCCC

The AMRC needs to AMRC,AMRC-WB SET ADMCTRL(Optional) DL activity factor Load Control


SET AMRC(Optional) SET AMRCWB(Optional)


ADD CELLOLC(Optional) Load Control

the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing downlink OLC fast restriction.Selection of RABs of the OLC is based on the service priorities and ARP values and bearing priority indication. The RAB of low priority is under control. In the actual system, UlOlcFTFRstrctRabNum and DlOlcFTFRstrctRabNum can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set UlOlcFTFRstrctRabNum and


L3 filtering coeffi Load Control, Iub Satell

ADD CELLLDM(Optional) If the ratio of DL Load Control ADD CELLOLC(Optional) Load Control

DL OLC trigger hys Load Control, Iub Satell

some services are selected based on the action rules to perform this action. This parameter defines the maximum number of downlink OLC fast TF restriction performed in entering/exiting the OLC status.After the overload is triggered, the RNC immediately executes OLC by first executing fast TF restriction. The internal counter is incremented by 1 with each execution. If the number of overloads does not exceed the OLC action threshold, the system lowers the BE service rate by lowering TF to relieve the overload. If the number of overloads exceeds the OLC action SET LDM(Optional)

SET SATLDM(Optional)

executing downlink OLC


ADD CELLLDM(Optional) If the ratio of DL Load Control

ADD CELLCAC(Optional) Load Control

value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access of a service, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four parameters can be used to limit the proportion between the conversational service, handover

ADD RESERVEOVSF(Mandatory) Orthogonal Variabl Load Control


Number of users se Load Control SET QOSACT(Optional) Rate adjustment sw AMRC SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Hando SET QOSACT(Optional) Inter-RAT handover Inter-RAT Handover,

Inter-Frequency Handov SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Handov SET QOSACT(Optional) Rate adjustment sw AMRC-WB SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Hand SET QOSACT(Optional) Inter-RAT handove Inter-RAT Handover, SET DPUCFGDATA(Optional) When the switch is None SET DCCC(Optional) This parameter det DCCC SET DCCC(Optional) This parameter det DCCC

Inter-Frequency Handov ADD CELLRLPWR(Mandatory) This parameter ref None



ADD CELLQOSHO(Optional) SET QOSHO(Optional)

For the inter-frequency or inter-RAT measurement based on coverage, the compressed mode can be stopped through reporting


RSCP measurement quantity is equal to the used frequency threshold that is configured on the BAM server in

SET CMCF(Optional) This parameter det Inter-Frequency Handov

Inter-Frequency Handov SET ADMCTRL(Optional) DL activity factor Load Control SET ADMCTRL(Optional) DL activity factor Load Control SET FRCCHLTYPEPARA(Optional) This parameter spe Radio Bearers, HSDPA

Threshold E1 of DL AMRC,AMRC-WB

Threshold E2 of DL AMRC,AMRC-WB

Threshold F1 of DL AMRC,AMRC-WB


system resources and therefore this approach is recommended only for low-rate users. The high-layer scheduling requires variable




Threshold F2 of DL AMRC,AMRC-WB ADD CELLCAC(Optional) When the algorithm Load Control

Duration from when Inter-Frequency Handov ADD IMAGRP(Optional) Expected diff delay None ADD RNCALLCELLBLK(Mandatory) This parameter spe UE Behaviors in Idle M MOD EMU(Optional) This parameter spec None ADD N7DPC(Mandatory) The DSP code must None SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET FRC(Optional) This parameter spe HSDPA, HSUPA ADD N7DPC(Mandatory) The DSP code must None

This parameter in HSPA+,HSDPA

This parameter ind Channel Description SET FRC(Optional) Power Control ADD N7DPC(Mandatory) None STR IPLOPTST(Mandatory) This parameter spec None





timeslots. It is applicable to soft IUCS_ALCAP: indicating that the DSP is on the user

STR IPLOPTST(Mandatory) This parameter ind None

Index of the DSP t IP RAN ACT VCLCC(Optional) This parameter ind None

ADD N7DPC(Mandatory) ADD M3DE(Mandatory) ADD MTP3LKS(Mandatory) ADD ADJNODE(Mandatory) ADD CNNODE(Mandatory) ADD NRNC(Mandatory) ADD MTP3RT(Mandatory)

SET CORRMALGOSWITCH(Optional) Flow Control, DCCC

Load Control SET STATETIMER(Optional) A timer to DRNC w None SET STATETIMER(Optional) A timer to DRNC wa None

This parameter spe Load Control SET QOSACT(Optional) If the parameter i DCCC ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of t Transmission Resource ADD PORTFLOWCTRLPARA(Optional) When the time of th Transmission Resource SET CORRMALGOSWITCH(Optional) Radio Bearers, HSDPA SET DTXDRXPARA(Optional) This parameter spec Radio Bearers ADD CNDOMAIN(Optional) CN domain specifi UE Behaviors in Idle M

selected simultaneously. 7) DRA_HSUPA_DCCC_SWITCH: When the switch is selected, the DCCC algorithm is used for HSUPA. The DCCC switch must be also selected before this switch takes effect. 8) DRA_HSUPA_STATE_TRANS_SWITCH: When the switch is selected, the status of the UE RRC that carrying HSUPA services can be changed to CELL_FACH at the RNC. If a PS BE service is carried over the E-DCH, the switch PS_BE_STATE_TRANS_SWITCH should be selected simultaneously. If

ADD GSMNCELL(Optional) ADD INTERFREQNCELL(Optional)

perform the blind handover. When choosing a DRD


DRD_SWITCH(DRD switch for single RAB):

SET FRC(Optional) UE Behaviors in Idle M SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers

Number of the E1/T None SET DSACAUTOALGO(Optional) Whether to enable None

This parameter spe IP RAN,TRM STR IPLOPTST(Mandatory) This parameter ind None SET TZ(Optional) Indication of dayli None ADD TSCROSS(Mandatory) Target end of times None

Destination IP addr IP RAN ADD FLOW(Mandatory) The destination IP None ADD IPRT(Mandatory) Mask of the subnet IP RAN ADD IPRTBIND(Mandatory) This parameter spe IP RAN ADD TSCROSS(Mandatory) Target timeslot No None SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET FRC(Optional) This parameter spe HSDPA, HSUPA SET DTXDRXPARA(Optional) If the interval at Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET ETHPORT(Optional) Duplex mode of th None

needs to monitor only one paging

ADD PPPLNK(Mandatory) ADD MPLNK(Mandatory)

PING IP(Optional) SET DSCPMAP(Mandatory) ADD SCTPLNK(Optional) SET PHBMAP(Mandatory)

ADD IPRT(Mandatory) ADD IPRTBIND(Mandatory)

SET RNCCELLSHUTDOWNPARA(Optional) When the cell is a None SET RNCCELLSHUTDOWNPARA(Optional) When the cell is au None SET RNCCELLSHUTDOWNPARA(Optional) When the switch is None ADD CELLDYNSHUTDOWN(Mandatory) When the switch is None ADD CELLDYNSHUTDOWN(Optional) When DynShutDownT None ADD FRALNK(Mandatory) Number of the E1/T None SET UESTATETRANS(Optional) Period of E-DCH t DCCC SET UESTATETRANS(Optional) Number of pending DCCC SET UESTATETRANS(Optional) Throughput ratio 4 DCCC SET UESTATETRANS(Optional) Number of periods DCCC ADD CELLHSUPA(Optional) Number of OVSF co HSUPA ADD IPPATH(Mandatory) Check IP address. IP RAN SET RACHMEASUREPARA(Optional) This parameter is Power Control SET RACHMEASUREPARA(Optional) This parameter spe Power Control

This parameter spe Load Control,DCCC SET RACHMEASUREPARA(Optional) This parameter spe Power Control SET RACHMEASUREPARA(Optional) This parameter spe Power Control

This parameter spec Load Control,DCCC SET TZ(Mandatory) End date of the DS None ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABDCCCMC(Optional) This parameter spe DCCC ADD TYPRABDCCCMC(Optional) This parameter spe DCCC SET EDCHRATEADJUSTSET(Optional) HSUPA UL rate adju DCCC, HSUPA ADD TYPRABOLPC(Mandatory) This parameter spe Power Control, HSUPA

SET FRC(Optional) ADD CELLFRC(Optional)

SET FRC(Optional) ADD CELLFRC(Optional)

ADD TYPRABOLPC(Mandatory) The large target r Power Control, HSUPA

ADD TYPRABOLPC(Mandatory) The little target Power Control, HSUPA ADD TYPRABDCCCMC(Optional) This parameter spe DCCC ADD TYPRABDCCCMC(Optional) This parameter spe DCCC SET DTXDRXPARA(Mandatory) This parameter spe Radio Bearers ADD TRMFACTOR(Optional) EFACH channel for Iub Overbooking ADD CELLEFACH(Optional) This parameter sp HSPA+ ADD NRNCCELL(Mandatory) E_FACH support ind Intra-Frequency Handov SET RRCESTCAUSE(Optional) This parameter spe Radio Bearers SET CMCF(Optional) This parameter spe Inter-Frequency Hando SET TZ(Mandatory) Type of the end dat None SET QUEUEPREEMPT(Optional) When the switch is Load Control ADD MTP3LKS(Optional) It indicates whethe None SET SMLC(Optional) This parameter spe LCS SET TZ(Mandatory) End month of the None ADD EMSIP(Mandatory) This parameter ind None

SET UEA(Optional) The encryption al Data Integrity Protectio ADD CELLDYNSHUTDOWN(Mandatory) End time of the fir None ADD CELLDYNSHUTDOWN(Mandatory) End time of the se None ADD CELLDYNSHUTDOWN(Mandatory) End time of the th None

Type of the M3UA d IP RAN ACT ETHOAMAH(Optional) This parameter spec None ACT ETHOAMAH(Optional) This parameter spec None ACT ETHOAMAH(Optional) This parameter spe None ACT ETHOAMAH(Optional) This parameter spec None ACT ETHOAMAH(Optional) This parameter spe None ACT ETHOAMAH(Optional) This parameter spec None ADD CELLHSUPA(Optional) HSUPA SET AAL2TMR(Optional) AAL2 connection es None SET AAL2TMR(Optional) AAL2 connection es None SET TZ(Mandatory) End time of the DS None ADD TYPRABDCCCMC(Optional) This parameter spec DCCC ADD TYPRABDCCCMC(Mandatory) This parameter spec DCCC ADD TYPRABRLC(Optional) This parameter spe Radio Bearers ADD TYPRABRLC(Optional) This parameter spec Radio Bearers ADD TYPRABRLC(Optional) This parameter spec Radio Bearers SET TZ(Mandatory) End day of the DST None SET TZ(Mandatory) End week of the D None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None SET UESTATETRANS(Optional) Pending time after DCCC SET UESTATETRANS(Optional) When the traffic vo DCCC ADD CTCH(Mandatory) Uniquely identifyi None

ADD M3DE(Mandatory) ADD M3LE(Mandatory)

power. The E-HICH is used provide the

ADD CELLMCCH(Mandatory) ID of the transpor MBMS Service

This parameter sp MBMS Service ADD CELLMEAS(Optional) Indicating whether UE Behaviors in Idle M ADD CELLOLC(Optional) This parameter def Load Control SET CTRLFACTOR(Mandatory) Active factor. The None SET SPIFACTOR(Mandatory) This parameter spec Iub Overbooking SET DCCC(Optional) This parameter spec DCCC SET ETHPORT(Optional) FC indicates wheth None

Flow control param Transmission Resource

ADD CELLMBMSFACH(Optional) SET MBMSFACH(Optional) SET MSCHFACH(Optional)

ADD FRALNK(Optional) ADD IMAGRP(Optional) SET OPT(Mandatory) SET ETHPORT(Mandatory) ADD MPGRP(Optional) ADD PPPLNK(Optional) ADD UNILNK(Optional) ADD ATMLOGICPORT(Optional) ADD PORTFLOWCTRLPARA(Mandatory) ADD IPLOGICPORT(Optional)

CRC check mode. None SET FRC(Optional) This parameter spe Power Control

This parameter in HSPA+,HSDPA

This parameter in HSPA+,HSDPA SET FDPCHRLPWR(Optional) This parameter spe Power Control SET FDPCHRLPWR(Optional) This parameter spe Power Control SET FDPCHPARA(Optional) This parameter sp Power Control ADD NODEBESN(Mandatory) This parameter spe None

Export file name, t None EXP CFGMML(Optional) Export file path None




EXP CFGMML(Optional) BKP DB(Optional)

SET INTRAFREQHO(Optional) Intra-Frequency Handov

be applied. L3 filtering should be able to filter as much random impulse as possible. Thus the filtered measurement value can reflect the varying of the actual measurement value. The input measurement value to L3 filter has been filtered by L1 filter, where the impact of fast fading is almost eliminated. So the L3 filtering should apply smooth filtering to shadow fading and small amount of remaining fast fading, thus providing more reliable measurement value for event judgement.As for the impact on network performance:

Inter-RAT Handover ADD NODEBLMTPARA(Optional) This parameter spe None ADD CELLMCCH(Optional) Switch of the FLC MBMS Service


measurement L3 filter coefficient. The report period is 480 ms. For specific analysis, refer to the intra-frequency measurement layer 3 filter coefficients and inter-frequency measurement layer 3 filter coefficients.The recommended values of the inter-RAT measurement layer 3 filter coefficients in different cells are as follows:-In cells where the average moving speed of UEs is low, there is a comparatively big shadow fading square error, so the recommended value of inter-RAT measurement layer 3 filter coefficients is 4. The value can be

Flow control switc Iub Overbooking,Trans ADD FLOW(Mandatory) Flow ID. None EXP ELABEL(Optional) File Name. None ACT LICENSE(Optional) License file name. None SET SMLC(Optional) When the CELLID+RT LCS ADD IPPATH(Optional) Indicating whethe IP RAN ADD IPPATH(Optional) FPTIMER. IP RAN ADD MPGRP(Optional) The flake size of None

Number of the frac None ADD FRALNK(Mandatory) Type of the fraction None ADD IMAGRP(Optional) The longer a TX fram None ADD ADJMAP(Mandatory) Index of the factor RAN Sharing ADD TRMFACTOR(Mandatory) Factor table index. Iub Overbooking ACT LICENSE(Optional) Function switch 1. None ACT LICENSE(Optional) Function switch 2. None ACT LICENSE(Optional) Function switch 3. None ACT LICENSE(Optional) Function switch 4. None

ADD FRALNK(Optional) SET OPT(Optional) ADD PPPLNK(Optional) ADD IMAGRP(Optional) ADD IPLOGICPORT(Optional) ADD MPGRP(Optional) ADD UNILNK(Optional) ADD ATMLOGICPORT(Optional) SET ETHPORT(Optional)

ADD FRALNK(Mandatory) RMV FRALNK(Mandatory)

If the available fo Transmission Resource ADD ATMLOGICPORT(Optional) Forward congestion Transmission Resource ADD AAL2PATH(Optional) If the available fo Transmission Resource ADD IPPATH(Optional) If the available fo Transmission Resource ADD RSCGRP(Optional) If the available fo Transmission Resource

If the available fo Transmission Resource

ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional) ADD IPLOGICPORT(Optional)

ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional)

ADD IPLOGICPORT(Optional) Cleared remaining Transmission Resource ADD ATMLOGICPORT(Optional) Forward congestion Transmission Resource ADD AAL2PATH(Optional) If the available fo Transmission Resource ADD IPPATH(Optional) If the available fo Transmission Resource ADD RSCGRP(Optional) If the available fo Transmission Resource

Reserved forward b Transmission Resource ADD ATMLOGICPORT(Optional) Forward handover Transmission Resource ADD AAL2PATH(Optional) Reserved forward b Transmission Resource ADD IPPATH(Optional) Reserved forward b Transmission Resource ADD RSCGRP(Optional) Reserved forward b Transmission Resource ADD PRACHTFC(Mandatory) The power occupanc Power Control ADD PRACHTFC(Optional) The power occupanc Power Control STR IPCHK(Mandatory) Check IP address. IP RAN

ADD PPPLNK(Optional) ADD MPGRP(Optional) ADD FRALNK(Optional) ADD IMAGRP(Optional) ADD UNILNK(Optional) ADD IPLOGICPORT(Optional)

ADD GPS(Optional) This parameter ind None ADD SMLCCELL(Optional) Geo-coordinate da LCS ADD TRMFACTOR(Optional) General common ch Iub Overbooking ADD TRMFACTOR(Optional) General common cha Iub Overbooking


Maximum rate of t AMRC ADD CELLLDR(Optional) Load Control ADD GPS(Optional) This parameter ind None ADD RSCGRP(Mandatory) Number of the tran Transmission Resource ADD RSCGRP(Mandatory) Type of the transpo Transmission Resource



disabled. If the switch is enabled,

Uniquely identifyi Inter-RAT Handover ADD GSMCELL(Mandatory) A name identifying Inter-RAT Handover ADD TYPRABQUALITYMEAS(Mandatory) When event 5A is t DCCC SET USERHAPPYBR(Optional) This parameter spec HSDPA, HSUPA ADD NRNCCELL(Optional) This parameter ind Power Control ADD TYPRABHSPA(Optional) This parameter spec HSUPA ADD SCTPLNK(Optional) It can be used to c None

ADD VPCLCX(Mandatory) None ADD CELLHSDPA(Optional) This parameter is u Load Control

HCS priority of th HCS Handover, UE Beha ADD TRMFACTOR(Optional) HSDPA background Iub Overbooking ADD TRMMAP(Optional) HSDPA background Transmission Resource ADD LOADEQ(Optional) HSDPA background Transmission Resource ADD TRMMAP(Optional) HSDPA background Transmission Resource ADD LOADEQ(Optional) HSDPA background Transmission Resource ADD TRMFACTOR(Optional) HSDPA conversatio Iub Overbooking ADD TRMMAP(Optional) HSDPA conversatio Transmission Resource ADD LOADEQ(Optional) HSDPA conversation Transmission Resource ADD TRMMAP(Optional) HSDPA conversatio Transmission Resource ADD LOADEQ(Optional) HSDPA conversation Transmission Resource ADD LOADEQ(Optional) HSDPA high priorit Transmission Resource ADD LOADEQ(Optional) HSDPA high priorit Transmission Resource

ADD GSMCELL(Mandatory) HO CELL(Optional) ADD GSMNCELL(Mandatory)

This parameter specifies the type of link that carries the high-end VPL/VCL cross connection.GUI value range: UNI, IMA, FRAATM, NCOPT.

ADD CELLHCS(Optional) ADD GSMCELL(Optional) ADD NRNCCELL(Optional)

ADD TRMFACTOR(Optional) HSDPA interactive Iub Overbooking ADD TRMMAP(Optional) HSDPA high PRI in Transmission Resource ADD TRMMAP(Optional) HSDPA high PRI in Transmission Resource ADD TRMMAP(Optional) HSDPA low PRI int Transmission Resource ADD TRMMAP(Optional) HSDPA low PRI int Transmission Resource ADD TRMMAP(Optional) HSDPA middle PRI Transmission Resource ADD TRMMAP(Optional) HSDPA middle PRI Transmission Resource ADD LOADEQ(Optional) HSDPA low priority Transmission Resource ADD LOADEQ(Optional) HSDPA low priority Transmission Resource ADD LOADEQ(Optional) HSDPA middle prior Transmission Resource ADD LOADEQ(Optional) HSDPA middle prior Transmission Resource ADD TRMFACTOR(Optional) HSDPA IMS downli Iub Overbooking ADD TRMMAP(Optional) HSDPA Signal prim Transmission Resource ADD LOADEQ(Optional) HSDPA IMS Signal Transmission Resource ADD TRMMAP(Optional) HSDPA Signal seco Transmission Resource ADD LOADEQ(Optional) HSDPA IMS Signal Transmission Resource ADD TRMFACTOR(Optional) HSDPA SRB downli Iub Overbooking ADD TRMMAP(Optional) HSDPA Signal prim Transmission Resource ADD LOADEQ(Optional) HSDPA Signal bear Transmission Resource ADD TRMMAP(Optional) HSDPA Signal seco Transmission Resource ADD LOADEQ(Optional) HSDPA Signal prima Transmission Resource ADD TRMFACTOR(Optional) HSDPA streaming s Iub Overbooking ADD TRMMAP(Optional) HSDPA streaming p Transmission Resource ADD LOADEQ(Optional) HSDPA streaming b Transmission Resource ADD TRMMAP(Optional) HSDPA streaming s Transmission Resource ADD LOADEQ(Optional) HSDPA streaming pr Transmission Resource ADD TRMFACTOR(Optional) HSDPA voice servi Iub Overbooking ADD TRMMAP(Optional) HSDPA Voice prim Transmission Resource ADD TRMMAP(Optional) HSDPA Voice seco Transmission Resource ADD VPCLCX(Optional) This parameter spe None ADD NRNC(Optional) Intra-Frequency Handov ADD NRNC(Mandatory) Indicating whether Intra-Frequency Handov ADD VPCLCX(Optional) This parameter spe None SET STATETIMER(Optional) A timer to RNC wai Intra-Frequency Handov SET STATETIMER(Optional) A timer to RNC wai URA Update, Cell Upda

should be transmitted transparently to

ADD INTERFREQNCELL(Optional) Inter-Frequency Handov SET STATETIMER(Optional) A timer to RNC wai URA Update, Cell Upda SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai URA Update, Cell Upda ADD NODEB(Optional) Indicating NodeB None

Priority of coverage-based inter-frequency handover."0" means that the coverage-based inter-frequency handover is not supported. "1" means the highest priority. "3" means the lowest priority.

SET CORRMALGOSWITCH(Optional) Intra-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov SET STATETIMER(Optional) A timer to RNC wai Intra-Frequency Handov ADD VPCLCX(Optional) This parameter spec None SET ADMCTRL(Optional) DL activity factor Load Control ADD CELLCAC(Optional) Average throughput Load Control SET CMCF(Optional) Inter-Frequency Hando SET ADMCTRL(Optional) DL activity factor Load Control SET ADMCTRL(Optional) DL activity factor Load Control


Length of smoothin Load Control, Iub Satell SET KPIALMTHD(Optional) The number of HSDP None SET KPIALMTHD(Optional) HSDPA Rab successf None SET ADMCTRL(Optional) DL activity factor Load Control ADD CELLCAC(Optional) Average throughput Load Control ACT LICENSE(Optional) The total HSDPA th None ADD CELLDYNSHUTDOWN(Optional) The cell will shut None

PS inter-RAT handover from the 3G network to the 2G network is performed in the cell change order process. 10) HO_INTER_RAT_PS_OUT_SWITCH: When the switch is selected, the RNC is allowed to initiate inter-frequency measure control and the PS inter-RAT hard handover from the 3G network to the 2G network.11) HO_INTER_RAT_RNC_SERVICE_HO_SWITCH: When the switch is selected, the attributes of inter-RAT handover of the services are based on the configuration of RNC parameters. When the switch used to set measurement used to set measurement

HSDPA exists and HSDPA cannot



ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD TYPRABHSPA(Optional) This parameter spe Radio Bearers ADD VPCLCX(Mandatory) This parameter spe None ADD CELLALGOSWITCH(Optional) If the HspaEnhSwitc Load Control SET FRC(Optional) According to the HSDPA ADD CELLALGOSWITCH(Optional) If the correspondi Load Control ADD CELLHSDPA(Optional) Total power of HSP HSDPA, HSUPA SET HOCOMM(Optional) HSPA serving cell Inter-Frequency Handov SET HSSCCHLESSOPPARA(Optional) This parameter spe Radio Bearers SET HSSCCHLESSOPPARA(Optional) This parameter spe Radio Bearers SET HSSCCHLESSOPPARA(Optional) This parameter spe Radio Bearers SET HSSCCHLESSOPPARA(Optional) This parameter spe Radio Bearers ADD CELLHSDPA(Optional) When [Allocate Cod HSDPA

ADD CELLHSDPA(Optional) When [Allocate Co HSDPA

ADD CELLHSDPA(Optional) When [Allocate Co HSDPA ADD CELLHSDPA(Optional) Measure Power Offs HSDPA

This parameter ind HSDPA ADD VPCLCX(Mandatory) This parameter spe None ADD CELLHSDPA(Optional) This parameter dec HSDPA SET FRC(Optional) This parameter spe HSUPA SET FRC(Optional) This parameter spe HSUPA SET FRC(Optional) This parameter spe HSUPA SET FRC(Optional) This parameter spe HSUPA SET ADMCTRL(Optional) UL activity factor Load Control SET DCCC(Optional) Threshold for rate Intra-Frequency Hand ADD NODEBALGOPARA(Optional) When the dynamic Load Control SET CMCF(Optional) Inter-Frequency Hando SET ADMCTRL(Optional) UL activity factor Load Control SET DCCC(Optional) Strategy of the U DCCC, HSUPA ADD CELLCAC(Optional) Threshold of all t Load Control ADD CELLCAC(Optional) Threshold of all t Load Control SET FRC(Optional) HSUPA BE traffic In DCCC SET ADMCTRL(Optional) UL activity factor Load Control ADD CELLCAC(Optional) Threshold of all t Load Control SET LDM(Optional) Length of smoothin Load Control SET KPIALMTHD(Optional) The number of HSUP None SET KPIALMTHD(Optional) HSUPA Rab successf None


the RNC determines

SET ADMCTRL(Optional) UL activity factor Load Control ACT LICENSE(Optional) The total HSUPA th None

ADD CELLLDM(Optional) HSUPA auto retrans Load Control

ADD CELLLDM(Optional) HSUPA auto retrans Load Control ADD CELLDYNSHUTDOWN(Optional) The cell will shut None ADD TRMMAP(Optional) HSUPA background Transmission Resource ADD LOADEQ(Optional) HSUPA background Transmission Resource ADD TRMMAP(Optional) HSUPA background Transmission Resource ADD LOADEQ(Optional) HSUPA background Transmission Resource ADD TRMFACTOR(Optional) HSUPA background Iub Overbooking ADD TRMMAP(Optional) HSUPA conversatio Transmission Resource ADD LOADEQ(Optional) HSUPA conversation Transmission Resource ADD TRMMAP(Optional) HSUPA conversatio Transmission Resource ADD LOADEQ(Optional) HSUPA conversation Transmission Resource ADD TRMFACTOR(Optional) HSUPA conversation Iub Overbooking ADD LOADEQ(Optional) HSUPA high priorit Transmission Resource ADD LOADEQ(Optional) HSUPA high priorit Transmission Resource ADD TRMFACTOR(Optional) HSUPA interactive Iub Overbooking ADD TRMMAP(Optional) HSUPA high PRI in Transmission Resource ADD TRMMAP(Optional) HSUPA high PRI in Transmission Resource ADD TRMMAP(Optional) HSUPA low PRI int Transmission Resource ADD TRMMAP(Optional) HSUPA low PRI int Transmission Resource ADD TRMMAP(Optional) HSUPA middle PRI Transmission Resource ADD TRMMAP(Optional) HSUPA middle PRI Transmission Resource ADD LOADEQ(Optional) HSUPA low priority Transmission Resource ADD LOADEQ(Optional) HSUPA low priority Transmission Resource

MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None ADD LOADEQ(Optional) HSUPA middle prior Transmission Resource ADD LOADEQ(Optional) HSUPA middle prior Transmission Resource ADD VPCLCX(Optional) This parameter spe None ADD TRMMAP(Optional) HSUPA Signal prim Transmission Resource ADD LOADEQ(Optional) HSUPA IMS Signal Transmission Resource ADD TRMMAP(Optional) HSUPA Signal seco Transmission Resource ADD LOADEQ(Optional) HSUPA IMS Signal Transmission Resource ADD TRMFACTOR(Optional) HSUPA IMS uplink Iub Overbooking ADD TRMMAP(Optional) HSUPA Signal prim Transmission Resource ADD LOADEQ(Optional) HSUPA Signal bear Transmission Resource ADD TRMMAP(Optional) HSUPA Signal seco Transmission Resource ADD LOADEQ(Optional) HSUPA Signal prima Transmission Resource ADD TRMFACTOR(Optional) HSUPA SRB uplink Iub Overbooking ADD TRMMAP(Optional) HSUPA streaming p Transmission Resource ADD LOADEQ(Optional) HSUPA streaming b Transmission Resource ADD TRMMAP(Optional) HSUPA streaming s Transmission Resource ADD LOADEQ(Optional) HSUPA streaming pr Transmission Resource ADD TRMFACTOR(Optional) HSUPA streaming se Iub Overbooking ADD TRMMAP(Optional) HSUPA Voice prim Transmission Resource ADD TRMMAP(Optional) HSUPA Voice seco Transmission Resource ADD TRMFACTOR(Optional) HSUPA voice servic Iub Overbooking ADD VPCLCX(Optional) This parameter spe None ADD VPCLCX(Mandatory) This parameter spe None

Intra-Frequency Handov




is a key event that adds a cell to the active set. To ensure timely handover, the hysteresis of event 1A should be set a little smaller than those of events 1B, 1F, 1C, and 1D. But the difference should not be too large, otherwise the soft handover ratio can be affected. In addition, this parameter is related to filter coefficient and trigger delay.As for the impact on network performance:For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the


trigger delay.As for the impact on network performance:For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But







Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov








this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover


The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to resisting signal fluctuation. Thus, the ping-pong


ADD CELLINTERFREQHOCOV(Optional) SET INTERFREQHOCOV(Optional) ADD CELLINTERRATHOCOV(Optional) SET INTERRATHOCOV(Optional)

currently used frequency is lower than the threshold) and event 2F (the estimated quality of the currently used frequency is higher than the threshold). Event 2D is used to enable the compressed mode and event 2F is used to disable the compressed mode. Therefore, Hystfor2D can be increased on the basis of recommended value and inter-frequency handover ping-pong effect statistics. Hystfor2F can also be increased to reduce frequent enabling or disabling of compressed mode and to avoid unnecessary updates of the

Inter-RAT Handover


algorithm to respond to signal change becomes lower. If the inter-RAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases.The emulation result shows that in a cell where the average moving speed of UEs is high, for example a cell that covers highways, HystforInterRAT can be set to 1.5 dB, because in the cell the terrain is flat and there are

Inter-RAT Handover


handover algorithm to respond to signal change becomes lower. If the inter-RAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE hands over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases.The emulation result shows that in a cell where the average moving speed of UEs is high, for example a cell that covers highways, HystforInterRAT can be set to 1.5 dB, because in the cell the terrain is flat and there are few barriers ,

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover

handover algorithm to respond to signal change becomes lower. If the inter-RAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE hands over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases.The emulation result shows that in a cell where the average moving speed of UEs is high, for example a cell that covers highways, HystforInterRAT can be set to 1.5 dB, because in the cell the terrain is flat and there are few barriers ,

Inter-RAT Handover

Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov SET SCCPTMR(Optional) After a connection None SET SCCPTMR(Optional) After a connection None ADD IPPATH(Optional) The ICMP Packet le IP RAN STR SCHTSK(Optional) Number of the sche None ADD CELLACCESSSTRICT(Mandatory) Indicating whether UE Behaviors in Idle M ADD CELLACCESSSTRICT(Optional) Indicating whether UE Behaviors in Idle M


capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the handover algorithm to respond to signal change becomes lower. If the inter-RAT handover hysteresis is set to an excessively high value, the GSM cell to which the UE is handed over must be of good quality. Therefore, the conditions for triggering the inter-RAT handover decision are hard to be satisfied, and the call drop rate increases.The emulation result shows that in a cell where the average moving speed of UEs is high, for example


handover at the RNC. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the stronger the capability of resisting signal

ADD CELLSELRESEL(Optional) UE Behaviors in Idle M

cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handovers, the measurement hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm by default when the slow

ADD CELLSELRESEL(Optional) UE Behaviors in Idle M


UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Threshold for inter UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Threshold for intra UE Behaviors in Idle M ADD CELLACCESSSTRICT(Optional) This parameter is v UE Behaviors in Idle M

ADD SAALLNK(Optional) Interval for sendi None SET HOCOMM(Optional) After the coverage Inter-Frequency Handov SET IUTIMERANDNUM(Optional) CN flow control ti Flow Control, Iu Flex

which is caused by the slow fading when the UE is on the edge of the cell. The ping-pong effect may trigger frequent location updates (idle mode), URA updates (URA_PCH), or cell updates (CELL_FACH, CELL_PCH), and thus increase the load of network signaling and the consumption of UE batteries. Set a proper measurement hysteresis to reduce as much as possible effect of the slow fading as well as ensuring timely cell updates of the UE. According to the CPICH RSCP emulation report of inter-frequency hard handovers, the measurement hysteresis ranges 4


mode. In cell reselection algorithm, this parameter is used for moving the


border of a cell. This parameter can be configured by the network planner according

Number of the IMA None ADD IMAGRP(Optional) IMA ID. None

Number of the IMA None ADD IMAGRP(Optional) IMA protocol versi None SET FRC(Optional) None SET FRCCHLTYPEPARA(Optional) Radio Bearers, HSDPA ADD CELLEFACH(Optional) Guaranteed rate o HSPA+ RST IUR(Mandatory) UE IMSI ID. None ADD IMSISNAMAP(Mandatory) The maximum of o IMSI-Based Handover ADD IMSISNAMAP(Mandatory) The minimum of on IMSI-Based Handover SET FRC(Mandatory) None ADD IMSIIDNNSCNIDMAP(Mandatory) Maximum of IMSI Iu Flex ADD IMSIIDNNSCNIDMAP(Mandatory) Minimum of IMSI Iu Flex ADD CELLEFACH(Optional) Maximum rate of HSPA+

ADD IMAGRP(Mandatory) ADD FRALNK(Mandatory) RMV IMAGRP(Mandatory) ADD IMALNK(Mandatory)

ADD IMALNK(Mandatory) STR IMATST(Mandatory) RMV IMALNK(Mandatory)

carried on the DCH, the - HSDPA: Uplink is preferably carried on DCH,

initial rate takes the larger value between this

SET DTXDRXPARA(Optional) If data is not tra Radio Bearers SET DTXDRXPARA(Optional) This parameter sp Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers MOD EMU(Optional) This parameter spec None INH BRD(Mandatory) This parameter indi None ADD SAALLNK(Optional) Maximum allowed n None SET UIA(Optional) The integrity prot Data Integrity Protectio ADD CELLEFACH(Optional) Guaranteed rate of HSPA+ ADD CELLEFACH(Optional) Maximum rate of t HSPA+ ADD CELLMBDRINTERFREQ(Optional) MBDR switch Inter-Frequency Handov ADD CELLINTERFREQHONCOV(Optional) Inter-Frequency Handov


used to set measurement


For the UE moving at the speed of 5 km/h, it is recommended that this parameter be set to -17 dB; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -14 dB; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -12 dB.For the cell in which the UEs are moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a macro cell, it



dBm; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -97 dBm; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -93 dBm.For the cell in which the UEs are moving at various speeds, this parameter should be set to -95 dBm. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -95 dBm.If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the



quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a

Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) DL theshold Inter-Frequency Handov

Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov ADD CELLHOCOMM(Optional) Inter-Frequency Handov


mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a micro cell, it means that the default value should be modified according to the

ADD CELLINTERFREQHOCOV(Optional) SET INTERFREQHOCOV(Optional) ADD CELLINTERFREQHONCOV(Optional) SET INTERFREQHONCOV(Optional)

for the inter-frequency measurement is 480 ms, whereas the report period for the intra-frequency measurement is 200 ms. In practice, it can be adjusted according to traffic performance measurement.The larger the value of this parameter, the stronger the smoothing effect 200 ms. In practice, it can be adjusted according INTER_FREQ_COV_NCOV:



For the UE moving at the speed of 5 km/h, it is recommended that this parameter be set to -17 dB; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -14 dB; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -12 dB.For the cell in which the UEs are moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a macro cell, it



dBm; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -97 dBm; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -93 dBm.For the cell in which the UEs are moving at various speeds, this parameter should be set to -95 dBm. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -95 dBm.If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the



quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a

Inter-Frequency Handov ADD CELLMEAS(Optional) Indicating whether Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov

Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov SET NCELLDETECTSWITCH(Optional) When it is checked Inter-Frequency Handov


mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a micro cell, it means that the default value should be modified according to the

measurement quantity for event

ADD CELLINTERFREQHOCOV(Optional) SET INTERFREQHOCOV(Optional) ADD CELLINTERFREQHONCOV(Optional) SET INTERFREQHONCOV(Optional)

value 0 indicates the timer is not to be enabled.This parameter is used to prevent the long inter-frequency measurement state (compressed mode) due to unavailable measurement of the target cells that meet the handover requirements.Setting the value of this parameter smaller can reduce frequency handover is performed when

SET INTERFREQHONCOV(Optional) Inter-Frequency Handov


used to set measurement


For the UE moving at the speed of 5 km/h, it is recommended that this parameter be set to -17 dB; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -14 dB; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -12 dB.For the cell in which the UEs are moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a



dBm; for the UE moving at the speed of 50 km/h, it is recommended that this parameter be set to -97 dBm; for the UE moving at the speed of 120 km/h, it is recommended that this parameter be set to -93 dBm.For the cell in which the UEs are moving at various speeds, this parameter should be set to -95 dBm. Through emulation, the call drop rate remains low for the UEs moving at the speed of 120 km/h when this parameter is set to -95 dBm.If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the



the measurement quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a

Inter-Frequency Handov ADD CELLHOCOMM(Optional) Inter-Frequency Handov


the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it means that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a micro cell, it means that the default value should be modified according to the RAT: measuring both inter-



signal quality between intra-frequency and inter-frequency handovers, the ping-pong effect in handover is prevented to some extent. The disadvantage of event-triggered report mode is that the event is reported only once and cannot be changed to periodical mode. If the handover fails, the periodical report is triggered only by the internal timer. For the cell-oriented algorithm parameters, each time when the best cell is updated, the inter-frequency measurement parameters should be updated accordingly.- Periodical report mode

ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov ADD CELLSELRESEL(Optional) This parameter is u UE Behaviors in Idle M ADD CELLMBDRINTERFREQ(Optional) UL theshold Inter-Frequency Handov SET OPERATORSHARINGMODE(Optional) when InterPlmnHoA RAN Sharing,MOCN SET OPERATORSHARINGMODE(Optional) when InterPlmnHoA RAN Sharing,MOCN ADD CELLMBDRINTERRAT(Optional) MBDR switch Inter-RAT Handover

signal quality between intra-frequency and inter-frequency handovers, the ping-pong effect in handover is prevented to some extent. The disadvantage of event-triggered report mode is that the event is reported only once and cannot be changed to periodical mode. If the handover fails, the periodical report is triggered only by the internal timer. For the cell-oriented algorithm parameters, each time when the best cell is updated, the inter-frequency measurement parameters should be updated accordingly.- Periodical report mode

Inter-RAT Handover


moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains lower for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a micro cell, it indicates that the

Inter-RAT Handover


the UE reports the event 2D when the measured value is smaller than the value of this parameter.If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger.In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT measurement is set smaller than that of the inter-frequency measurement.

Inter-RAT Handover

Inter-RAT Handover ADD CELLMBDRINTERRAT(Optional) DL theshold Inter-RAT Handover


frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a


services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode and stop inter-

Inter-RAT Handover

ADD CELLINTERRATHOCOV(Optional) SET INTERRATHOCOV(Optional) ADD CELLINTERRATHONCOV(Optional) SET INTERRATHONCOV(Optional)


ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover

Inter-RAT Handover SET SMLC(Optional) This parameter spe LCS



This parameter specifies the maximum number of attempts for the RNC to perform inter-RAT handovers after a non-coverage-based inter-RAT handover failure. The handover

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover SET SMLC(Optional) This parameter spe LCS

report meets the following condition:Mother_RAT + CIO >= Tother_RAT + H/2 the system starts the trigger timer and implements the handover decision after timeout. If the quality of the preceding RAT meets the following condition before timeout:Mother_RAT + CIO < Tother_RAT - H/2 The system stops the timer, and the RNC waits for another inter-RAT measurement report.In which, Mother_RAT indicates the measurement result of the GSM RSSI;

Inter-RAT Handover


moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains lower for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a micro cell, it

Inter-RAT Handover


the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger.In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT measurement is set smaller than that of the inter-frequency measurement.

Inter-RAT Handover

Inter-RAT Handover


frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a


services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode and stop inter-

Inter-RAT Handover

ADD CELLINTERRATHOCOV(Optional) SET INTERRATHOCOV(Optional) ADD CELLINTERRATHONCOV(Optional) SET INTERRATHONCOV(Optional)

started.To set this parameter, you need to consider the following factors:This parameter aims to prevent that the handover conditions are not met and the compressed mode is kept for a long time when the UE does not move or is moving in a low speed. The service quality is adversely affected and the total available capacity decreases if the compressed mode is kept for a long time.Most inter-RAT handovers can be finished within 60 s.As for the impact on network performance,If the InterRATMeasTime is excessively

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover SET NCELLDETECTSWITCH(Optional) When it is checked, Inter-RAT Handover


Inter-RAT Handover


report meets the following condition:Mother_RAT + CIO >= Tother_RAT + H/2 the system starts the trigger timer and implements the handover decision after timeout. If the quality of the preceding RAT meets the following condition before timeout:Mother_RAT + CIO < Tother_RAT - H/2 The system stops the timer, and the RNC waits for another inter-RAT measurement report.In which, Mother_RAT indicates the measurement result of the GSM RSSI;

Inter-RAT Handover


longer than 480 ms. If InterPeriodReportInterval is excessively high, the handover judging time will be long, and handovers will be slower.The InterPeriodReportInterval is adjusted according to the configured GSM RSSI measurement compressed mode sequence. According to the current configured GSM RSSI measurement compressed mode sequence, the RSSI measurement of eight GSM cells can be finished in 480 ms, so the RSSI measurement of 16 GSM cells can be finished in 1000 ms.

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover ADD CELLINTERRATHOCOV(Optional) Inter-RAT Handover ADD CELLINTERRATHONCOV(Optional) Inter-RAT Handover SET INTERRATHOCOV(Optional) Inter-RAT Handover SET INTERRATHONCOV(Optional) Inter-RAT Handover

Inter-RAT Handover

UE behavior is not defined.Because the GSM RSSI measurement period is 480 ms, the inter-RAT periodical report interval should be longer than 480 ms. If InterPeriodReportInterval is excessively high, the handover judging time will be long, and handovers will be slower.The InterPeriodReportInterval is adjusted according to the configured GSM RSSI measurement compressed mode sequence. According to the current configured GSM RSSI measurement compressed mode sequence, the RSSI exceeds the threshold, UE will exceeds the threshold, UE will exceeds the threshold, UE will exceeds the threshold, UE will


3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report

Inter-RAT Handover

Inter-RAT Handover


3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report


which the UEs are moving at various speeds, this parameter should be set to -14 dB. Through emulation, the call drop rate remains lower for the UEs moving at the speed of 120 km/h when this parameter is set to -14 dB.If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.If the cell is a

Inter-RAT Handover


measurement, if the UE reports the event 2D when the measured value is smaller than the value of this parameter. If you want to start the compressed mode earlier, set the threshold for event 2D larger. Otherwise, set the threshold for event 2D smaller; if you want to reduce the ping-pong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger.In most cases, UEs want to be maintained within a 3G network. Thus, the start threshold of the inter-RAT measurement is set smaller than that of the inter-frequency

Inter-RAT Handover

Inter-RAT Handover


quantity for inter-frequency measurement, the RNC sends the signaling to stop the compressed mode and the inter-frequency measurement, if the UE reports event 2F when the measured value is larger than the value of this parameter. If the cell is a macro cell, it indicates that micro cells exist in this cell. To enable the traffic absorption function of the micro cells, the compressed mode start threshold should be set higher and the stop threshold be set lower, that is, the threshold for event 2D/2F be set higher by using CPICH RSCP.


non-HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement, the RNC sends the signaling to deactivate compressed mode

Inter-RAT Handover


ping-pong effect in the handover is prevented to some extent. The disadvantage of event-triggered report mode is that the event is reported only once and cannot be changed to periodical mode. If the handover fails, the periodical report is triggered only by the internal timer. For the cell-oriented algorithm parameters, each time the best cell is updated, the inter-frequency measurement parameters should be updated accordingly.

-Periodical report modeWhen the quality of the GSM cell reported by the UE is higher than the inter-RAT

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover ADD CELLSELRESEL(Optional) This parameter is u UE Behaviors in Idle M ADD CELLMBDRINTERRAT(Optional) UL theshold Inter-RAT Handover STR ETHOAMLOOPTST(Optional) This parameter spec None

ping-pong effect in the handover is prevented to some extent. The disadvantage of event-triggered report mode is that the event is reported only once and cannot be changed to periodical mode. If the handover fails, the periodical report is triggered only by the internal timer. For the cell-oriented algorithm parameters, each time the best cell is updated, the inter-frequency measurement parameters should be updated accordingly.

-Periodical report modeWhen the quality of the GSM cell reported by the UE is higher than the inter-RAT



active cell is very poor quality, then the blind handover is triggered as the last attempt before call drop.The emergency blind handover is a special occasion that requires on-site measurements on the scope of the pilot strength of the best cell at the location where the blind handover is triggered. Generally, this function need not be started, so the parameter is set to the lowest value by default, indicating that the blind handover is not triggered.The larger the set value is, the more easily the event 1F can be triggered. The smaller the set value is, the more difficultly the event 1F can be triggered. For the

ADD CELLINTRAFREQHO(Optional) Intra-Frequency Handov

Identifying the per Load Control, Iub Satell ADD CELLMEAS(Optional) Indicating whether Intra-Frequency Handov

This parameter spec Intra-Frequency Handov SET NCELLDETECTSWITCH(Optional) When it is checke Intra-Frequency Handov SET SMLC(Mandatory) Relative threshold LCS

be applied. L3 filtering should be able to filter as much random impulse as possible. Thus the filtered measurement value can reflect the varying of the actual measurement value. The input measurement value to L3 filter has been filtered by L1 filter, where the impact of fast fading is almost eliminated. So the L3 filtering should apply smooth filtering to shadow fading and small amount of remaining fast fading, thus providing more reliable measurement value for event judgement.As for the impact on network performance: SET LDCPERIOD(Optional)

SET SATLDCPERIOD(Optional)




least 2) is approximately 35%. It is recommended to set the relative threshold a little higher (5 dB to 7 dB) during site deployment, and to reduce the threshold when the users increase. But the threshold must be higher than 3 dB to avoid the ping-pong handover.In some specific applications, you can set different relative thresholds for event 1A and event 1B to reduce the ping-pong effect and the soft handover ratio. For example, if the ping-pong effect cannot be curbed by adjusting the hysteresis values for event 1A and event 1B, you can curb it by setting a



approximately 35%. It is recommended to set the relative threshold a little higher (5 dB to 7 dB) during site deployment, and to reduce the threshold when the users increase. But the threshold must be higher than 3 dB to avoid the ping-pong handover.In some specific applications, you can set different relative thresholds for event 1A and event 1B to reduce the ping-pong effect and the soft handover ratio. For example, if the ping-pong effect cannot be curbed by adjusting the hysteresis values for event 1A and event 1B, you can curb it by setting a

Intra-Frequency Handov SET SMLC(Mandatory) Relative threshold LCS





least 2) is approximately 35%. It is recommended to set the relative threshold a little higher (5 dB to 7 dB) during site deployment, and to reduce the threshold when the users increase. But the threshold must be higher than 3 dB to avoid the ping-pong handover.In some specific applications, you can set different relative thresholds for event 1A and event 1B to reduce the ping-pong effect and the soft handover ratio. For example, if the ping-pong effect cannot be curbed by adjusting the hysteresis values for event 1A and event 1B, you can curb it by setting a

Intra-Frequency Handov SET IUTIMERANDNUM(Optional) CN flow control ti Flow Control, Iu Flex LOP VCL(Mandatory) Local IP address None



This IP address is IP RAN ADD VLANID(Mandatory) Next Hop IP Addre None ADD ETHTRKIP(Mandatory) This parameter spec None ADD IPPATH(Mandatory) Local IP address. IP RAN ADD PPPLNK(Optional) IP header compress None ADD MPGRP(Optional) IP header compress None ADD ETHIP(Mandatory) This parameter indi None

This parameter spec IP RAN ADD NODEBIP(Mandatory) NodeB IP_TRANS Bi None ADD NODEBIP(Mandatory) NodeB IP_TRANS L None ADD NODEBIP(Mandatory) Number of NodeB None ADD NODEBIP(Mandatory) Number of NodeB None ADD NODEB(Mandatory) Indicating whether IP RAN ADD ETHIP(Mandatory) Master ip address, None

ADD ETHIP(Mandatory) ADD DEVIP(Mandatory) ADD IPOAPVC(Mandatory) ACT VCLCC(Mandatory)

ADD ETHTRKIP(Mandatory) RMV ETHTRKIP(Mandatory)

This parameter spe None ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ADD CELLACCESSSTRICT(Optional) Indicating whether Load Control ACT ETHOAMAH(Optional) Carry port master f None ADD RSCGRP(Mandatory) Is first class trans Transmission Resource

ADD NODEBLMTPARA(Optional) None

ADD ETHTRKIP(Mandatory) RMV ETHTRKIP(Mandatory)

This parameter specifies whether the MAC-hs window size is fixed.- If this parameter is set to TRUE, the MAC-hs window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size is flexible.

ACT LICENSE(Optional) YES: primary CN op None ACT IPPM(Mandatory) QOSPATH choose Y None ADD ADJNODE(Mandatory) To determine whet IP RAN ADD IPPATH(Mandatory) The interface type Transmission Resource

Interface type. Transmission Resource SET ACALGO(Optional) When the Iu interfa Flow Control ADD NODEBOLC(Optional) Number of RABs sel Load Control ADD NODEBOLC(Optional) Number of RABs sel Load Control SET STATETIMER(Optional) A timer to Iu CS R None SET STATETIMER(Optional) A timer to Iu PS Re None ADD NRNC(Optional) Indicating whether Flow Control ADD NRNC(Mandatory) Indicating whether SRNS Relocation ADD NRNC(Optional) Indicating whether Intra-Frequency Hando ADD NRNC(Optional) Indicating whether Intra-Frequency Hando RST IURESOURCE(Mandatory) Iu signaling connec None SET OPT(Optional) This parameter ind None SET OPT(Optional) This parameter ind None SET OPT(Optional) J0 TX type.This pa None SET OPT(Optional) J0 TX value.This pa None SET OPT(Optional) Expected J1 RX typ None SET OPT(Optional) This parameter indi None SET OPT(Optional) This parameter indi None SET OPT(Optional) This parameter indi None

SET COPTLNK(Optional) This parameter spe None

ADD TRMMAP(Mandatory) ADD ADJMAP(Mandatory)

SET COPTLNK(Optional) This parameter spe None

SET COPTLNK(Optional) This parameter spec None

SET COPTLNK(Optional) This parameter spec None SET MSP(Optional) This parameter indi None

ADD SAALLNK(Optional) Timer of waiting f None STR IPCHK(Mandatory) Key detect or not. IP RAN SET KPIALMTHD(Optional) the Period of KPI None SET KPIALMTHD(Optional) RRC Report KPI A None

Identifying a locat Inter-RAT Handover,L ADD GPS(Mandatory) This parameter ind None ADD GPS(Mandatory) This parameter ind None ADD IPLOGICPORT(Optional) Period of delay me Transmission Resource ADD IPLOGICPORT(Optional) Period of delay ad Transmission Resource ADD IPLOGICPORT(Optional) Threshold of rate Transmission Resource ADD IPLOGICPORT(Optional) Filter mantissa of Transmission Resource ADD IPLOGICPORT(Optional) Filter mantissa of Transmission Resource ADD VPCLCX(Mandatory) This parameter spe None

Length of smoothin Load Control, Iub Satell

ADD LAC(Mandatory) ADD RAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD SAC(Mandatory) ADD NRNCCELL(Mandatory) ADD GSMCELL(Mandatory) ADD CZ(Mandatory) ADD LASNAMAP(Mandatory)


Load Control

This parameter spe Load Control

This parameter spe Load Control SET DRD(Optional) This parameter spe Load Control SET DRD(Optional) This parameter spe Load Control

Load Control

Load Control SET DRD(Optional) This parameter spe Load Control


algorithm will be applied.- Power: Power(Downlink none-HSDPA power is used for services carried on DCH, and downlink HSDPA guarantee power is used for services carried on HS-DSCH)will be applied to the load balancing DRD algorithm.- UserNumber: User number(Downlink R99 equivalent user number is used for services carried on DCH, and downlink HSDPA user number is used for services carried on




balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level


balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Load balance

SET LDCALGOPARA(Optional) Load Control ADD CELLLDR(Optional) FALSE means not co Load Control ADD CELLLDR(Optional) Code resource usage Load Control SET LDCALGOPARA(Optional) Load Control SET LDCALGOPARA(Optional) Load Control

Load Control, Iub Satell SET LDCALGOPARA(Optional) Load Control SET LDCALGOPARA(Optional) Load Control

QoS, and CS/PS inter-RAT handover.LCG_CREDIT_LDR_SWITCH: Local cell group credit congestion control algorithm. This is an RNC-oriented algorithm. When the local cell group creadit load is heavy, the load can be reshuffled through BE service rate reduction, renegotiation of uncontrollable real-time service QoS, and CS/PS inter-RAT handover.LC_CREDIT_LDR_SWITCH: Local cell credit congestion control algorithm. This is an RNC-oriented algorithm. When the local cell creadit load is heavy, the load

processing of LDR action trigged by Iub bandwidth. processing of LDR action trigged by Iub bandwidth. SET LDCPERIOD(Optional)

SET SATLDCPERIOD(Optional)

excessively high, the LDR action may be executed rarely, failing to processing of LDR action trigged by Iub bandwidth. processing of LDR action trigged by Iub bandwidth.

ADD LOADEQ(Mandatory) Path Load EQ thres None ADD ADJMAP(Mandatory) Index of the load RAN Sharing ADD ADJMAP(Mandatory) Index of the load E RAN Sharing ADD ADJMAP(Mandatory) Index of the load E RAN Sharing

M3UA local entity IP RAN ADD ETHMD(Optional) This parameter spec None SET ALMML(Mandatory) Alarm mask switch None ADD VPCLCX(Optional) This parameter spe None LOD PATCH(Optional) This parameter indi None

ADD M3LE(Mandatory) ADD M3DE(Mandatory)

ADD BRD(Optional) None SET OPT(Mandatory) This parameter indi None ADD VPCLCX(Optional) This parameter spe None SET CMCF(Mandatory) DL SF threshold to Inter-Frequency Handov SET DCCC(Optional) When the BE service DCCC SET ALMPORT(Optional) This parameter spec None

SET E1T1(Optional) None

This parameter indicates the Logic function type.UCP:UMTS RNC Control plane ProcessRUCP:Resource Management and UMTS RNC Control plane ProcessUUP:UMTS RNC User plane Process

Coding type of the line.1. HDB3 and AMI are applicable to E1 links, and B8ZS and AMI_ZCS are applicable to T1 links.2. The value of this parameter should be consistent with the peer one.

Number of the E1/T None

ADD M3LNK(Optional) Link work mode,R IP RAN

Used for MTP3 link None SET E1T1(Optional) Frame Structure. T None


SET E1T1LOP(Optional) LOP E1T1(Optional) STR E1T1TST(Optional) SET E1T1(Optional) SET COPTLNK(Mandatory)

ADD MTP3LKS(Optional) ADD M3LKS(Optional)

ACT VCLCC(Mandatory) LOP VCL(Mandatory)

ADD PPPLNK(Mandatory) The local IP addres None ADD MPGRP(Mandatory) Local IP address None STR IPLOPTST(Mandatory) This parameter indi None

Uniquely identifyin None ADD SCTPLNK(Mandatory) First local IP addre IP RAN ADD SCTPLNK(Optional) Second local IP add IP RAN ADD SCTPLNK(Mandatory) Local port of the IP RAN SET LODCTRL(Mandatory) Load control param None ADD SCTPLNK(Mandatory) This field indicate None ADD SCTPLNK(Mandatory) No. of the logic po None ADD SCTPLNK(Mandatory) Slot No. of the log None ADD GPS(Mandatory) This parameter ind None ADD GPS(Mandatory) This parameter ind None

Loopback type. None ADD IPLOGICPORT(Optional) Period of lost adj Transmission Resource ADD VPCLCX(Optional) This parameter spec None

This parameter indi Transmission Resource

ADD LOCELL(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory)

SET E1T1LOP(Mandatory) SET OPTLOP(Mandatory)

ADD IPLOGICPORT(Mandatory) RMV IPLOGICPORT(Mandatory) ADD IPPATH(Mandatory)

ADD ATMLOGICPORT(Optional) Logical port No. Transmission Resource ADD IPPATH(Mandatory) Slot No. of the IP l Transmission Resource ADD ATMLOGICPORT(Mandatory) Type of the logic Transmission Resource

Specifying to query None ADD VPCLCX(Mandatory) This parameter spe None ADD VPCLCX(Mandatory) This parameter spe None ADD VPCLCX(Optional) This parameter spe None ADD VPCLCX(Optional) This parameter spe None ADD VPCLCX(Mandatory) This parameter spe None SET SCTPSRVPORT(Optional) This parameter spe None SET DPUCFGDATA(Optional) This parameter defi None SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET DTXDRXPARA(Optional) This parameter spe Radio Bearers SET FRC(Optional) This parameter sp HSDPA SET FRC(Optional) This parameter sp HSDPA

This parameter spe None

SAAL, SCTP. For de None ADD ETHMA(Mandatory) This parameter spe None

SET E1T1(Optional) SET COPTLNK(Mandatory)

ADD ETHMA(Mandatory) ADD ETHMEP(Mandatory) ACT ETHCC(Mandatory) PING MAC(Mandatory) TRC MAC(Mandatory)

ADD NCP(Optional) ADD CCP(Optional)

SET CORRMALGOSWITCH(Optional) HSDPA, HSUPA RST IUR(Mandatory) SRNTI mask to be r None ADD DEVIP(Mandatory) Mask of the subnet None ADD PPPLNK(Mandatory) Subnet mask of the None ADD MPGRP(Mandatory) Subnet mask of th None ADD ETHIP(Mandatory) This parameter indi None ADD EMSIP(Mandatory) This parameter ind None ADD ETHTRKIP(Mandatory) This parameter spe None

The maximum allowe UE Behaviors in Idle M ADD NRNCCELL(Optional) This parameter in Channel Description

RNC during the 2G to 3G handover.3) MAP_PS_BE_ON_E_FACH_SWITCH: When the switch is selected, the PS BE services can be transmitted on the E-FACH.4) MAP_PS_STREAM_ON_E_FACH_SWITCH: When the switch is selected, the PS services can be transmitted on the E-FACH.5) MAP_PS_STREAM_ON_HSDPA_SWITCH: When the switch is selected, a PS streaming service is mapped on the HS-DSCH if the DL maximum rate of the service is greater than or equal to the HSDPA threshold

ADD CELLSELRESEL(Optional) ADD NRNCCELL(Mandatory)


ADD SMLCCELL(Optional) LCS ADD SCTPLNK(Optional) If the number of t None ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover

This parameter spec None

ADD IPLOGICPORT(Mandatory) Maximum bandwidth Transmission Resource

Maximum coverage of the cell antenna.This is controlled by MTRLGY and valid when MET~0(metric system).

This parameter specifies the maximum coverage of the cell antenna.This is controlled by MTRLGY and valid when IMP~1(British measurement).

RNC to perform inter-freq handover after RNC to perform inter-RAT

ADD TYPRABBASIC(Mandatory) ADD CELLRLPWR(Mandatory)

SET CTRLPLNSHAREPARA(Optional) Maximum numbers of Flow Control

SET CTRLPLNSHAREPARA(Optional) Maximum numbers of Flow Control ADD SAALLNK(Optional) Maximum number of None

Intra-Frequency Handov ADD FACH(Optional) Max common chann Channel Description SET RACHMEASUREPARA(Optional) This parameter spe Power Control SET HOCOMM(Optional) When this RNC acts HSUPA ADD TYPRABOLPC(Mandatory) This parameter spe Power Control, HSUPA ADD CELLCAC(Optional) Maximum number o Load Control ADD FACH(Optional) The offset between Power Control, Load Co ADD IPPATH(Optional) Maximum Frame L IP RAN SET SMLC(Optional) Maximum number of LCS ADD CELLCAC(Optional) Maximum number of Load Control ADD CELLCAC(Optional) Maximum number of Load Control


But in this case, the user occupies resources of several cells, which increases the amount of data to be processed by the system and lowers the system

Max allowed number Load Control, Iub Satell ADD PPPLNK(Optional) This parameter ca None ADD MPGRP(Optional) This parameter ca None ADD NODEBLMTPARA(Optional) This parameter spe None ADD SAALLNK(Optional) Maximum number of None ADD SCTPLNK(Optional) If the number of t None ADD PCPICH(Optional) Maximum TX power o Load Control

ADD SAALLNK(Optional) Maximum number of None

SET QUEUEPREEMPT(Optional) Maximum queue time Load Control ADD PPPLNK(Optional) Maximum length of None

ADD MPGRP(Optional) Maximum length of None ADD CELLHSUPA(Optional) Maximum target upl HSUPA STR POSAVE(Optional) Maximum time for s None

Sum of the maximum None ADD CELLCAC(Optional) The maximum UL tra Power Control ADD CELLCAC(Optional) Maximum UL transmi Power Control


ADD CELLSETUP(Optional) ADD QUICKCELLSETUP(Optional)

ADD CELLCAC(Optional) The maximum UL tra Power Control ADD CELLCAC(Optional) Maximum UL transmi Power Control ADD CELLLDR(Optional) This parameter spe Load Control ADD GSMNCELL(Optional) Inter-RAT Handover ADD INTERFREQNCELL(Optional) Inter-RAT Handover ADD GSMNCELL(Optional) Inter-RAT Handover ADD INTERFREQNCELL(Optional) Inter-RAT Handover ADD IPRTBIND(Mandatory) This parameter spec None STR IPCHK(Mandatory) Backup port gatewa IP RAN ADD IPRTBIND(Mandatory) This parameter ind None ADD IPRTBIND(Mandatory) This parameter ind None SET ADMCTRL(Optional) Activity factor of Load Control ADD TRMFACTOR(Optional) MBMS common chan Iub Overbooking ADD SCCPCHBASIC(Optional) Indicating whethe None ADD CELLLDR(Optional) When the priority Load Control SET MBMSALARMPARA(Mandatory) A timer used to al MBMS Service SET MBMSSWITCH(Optional) ON denotes enablin MBMS Service ADD MBMSALARMSERVICE(Mandatory) mobile country co MBMS Service ADD MBMSALARMSERVICE(Mandatory) mobile network co MBMS Service ADD INTRAFREQNCELL(Optional) It is an indicator MBMS Service ADD CELLOLC(Optional) Load Control, MBMS Se SET QUEUEPREEMPT(Optional) Indicating whethe Load Control SET RNCMBMSPARA(Optional) This parameter spe MBMS Service

MBMS SA ID. For de MBMS Service ADD MBMSALARMSERVICE(Mandatory) MBMS Service Iden MBMS Service SET MBMSSWITCH(Mandatory) ON denotes enabli MBMS Service ACT LICENSE(Optional) The total MBMS thr None

This parameter spe MBMS Service

that the neighboring cell that the neighboring cell that the neighboring cell that the neighboring cell

performed in each [OLC period] and

ADD CELLMBMSSA(Mandatory) ADD MBMSSA(Mandatory) ADD SAMBMSPARA(Mandatory)

ADD CELLMBMSPARA(Optional) ADD SAMBMSPARA(Optional) SET RNCMBMSPARA(Optional)

ADD ATMTRF(Optional) This parameter indi None

Mobile country co RAN Sharing,IMSI-Base SET MBMSPERF(Mandatory) Mobile country co MBMS Service ADD MPGRP(Optional) This parameter is None ADD ATMTRF(Optional) This parameter indi None

This parameter spe None ADD ETHMD(Mandatory) This parameter spe None

Inter-RAT Handover

This parameter sp None ADD ETHMEP(Mandatory) This parameter spe None

ADD ETHMEP(Mandatory) This parameter sp None ADD MPGRP(Optional) MP/MC list head o None ADD CELLMCCH(Mandatory) ID of the MICH. MBMS Service ADD CELLMCCH(Optional) TX power of the MI MBMS Service ADD CELLMCCH(Optional) The value indicate MBMS Service ADD IPLOGICPORT(Mandatory) Minimum bandwidth Transmission Resource ADD FACH(Optional) Min common channe Channel Description ADD NODEBLMTPARA(Optional) This parameter spe None SET RACHMEASUREPARA(Optional) This parameter spe Power Control

ADD CNOPERATOR(Mandatory) ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory) ADD GSMCELL(Mandatory)

ADD ETHMD(Mandatory) RMV ETHMD(Mandatory) ADD ETHMA(Mandatory)


measurement quantity is used for event 3A measurement. The physical unit is dB; CPICH_RSCP indicates that the RSCP measurement quantity is used for event 3A measurement. The physical unit is ADD ETHMEP(Mandatory)

ACT ETHCC(Mandatory)

This parameter is AMRC, AMRC-WB

This parameter is v DCCC


DL basic common me Load Control, Iub Satell

Measurement report Load Control, Iub Satell

This parameter spe Load Control, Iub Satell

HSDPA power requir Load Control, Iub Satell SET LDM(Mandatory) This parameter spe Load Control

UL basic common me Load Control, Iub Satell


This parameter is v Inter-Frequency Handov ADD IMAGRP(Optional) Minimum number of None

ADD CELLQUALITYMEAS(Mandatory) SET QUALITYMEAS(Mandatory)



SET LDM(Mandatory) SET SATLDM(Mandatory)







ADD PCPICH(Optional) Minimum TX power o Load Control STR IPCHK(Optional) Min interval of BF IP RAN STR IPCHK(Optional) Min interval of BF IP RAN ADD NODEBLMTPARA(Optional) This parameter spe None ADD RACH(Optional) Maximum number of Power Control

Mobile network co RAN Sharing,Inter-RAT SET MBMSPERF(Mandatory) Mobile network co MBMS Service

ADD CNOPERATOR(Mandatory) ADD GSMCELL(Mandatory) ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory)

SET OPERATORSHARINGMODE(Optional) MOCN Control Sw MOCN SET OPERATORSHARINGMODE(Optional) when MOCN Suppor MOCN SET MSP(Optional) This parameter ind None SET CLKMODE(Mandatory) This parameter spe None STR IPCHK(Mandatory) Check mode. PRIM IP RAN

ADD SCTPLNK(Mandatory) Working mode of t None SET QUICKCFG(Mandatory) Configure mode None

SET AAL2TMR(Optional) This timer is star None SET AAL2TMR(Optional) This timer is star None ADD TYPRABRLC(Optional) This parameter spec Radio Bearers SET DCCC(Optional) Length of the peri DCCC ADD NODEBESN(Mandatory) This parameter spe None

Number of the ML None ADD SAALLNK(Optional) Management provin None ADD MPGRP(Optional) The type of MLPP None ADD BRD(Optional) This parameter ind None SET MRRNCCTRL(Mandatory) Intra-frequency me None

SET MRSCOPECTRL(Mandatory) Indicating whether None SET MRRNCCTRL(Optional) When the parameter None

SET MRRNCCTRL(Mandatory) MR trace traffic ty None SET MBMSSWITCH(Optional) "ON" denotes supp MBMS Service SET MBMSSWITCH(Optional) "ON" denotes supp MBMS Service ADD CELLCBSSAC(Mandatory) Broadcast message CBS ADD CELLCBSSAC(Optional) When the parameter CBS SET MSPCMD(Mandatory) This parameter dec None

ADD MPGRP(Mandatory) RMV MPGRP(Mandatory) ADD MPLNK(Mandatory)

ADD CELLCAC(Optional) Maximum power lim Load Control

ADD CELLCAC(Optional) Maximum code limi Load Control


This parameter spe MBMS Service SET RNCMBMSPARA(Optional) This parameter spe MBMS Service SET MTCH(Optional) This parameter sp MBMS Service

ADD CELLCAC(Optional) Available guarant Load Control

ADD CELLMBMSFACH(Optional) SET MBMSFACH(Optional)

ADD CELLMBMSFACH(Optional) SET MBMSFACH(Optional)

ADD CELLCAC(Optional) Available guarante Load Control

ADD GPS(Optional) This parameter indi None ADD SMLCCELL(Optional) The OM interface s LCS

This parameter in None

Maximum time befo None

SET ETHPORT(Optional) ADD SCTPLNK(Optional)


STR IPCHK(Optional) My discriminator IP RAN ADD SAALLNK(Optional) Number of proving None SET IDLEMODETIMER(Optional) Maximum number UE Behaviors in Idle M SET CONNMODETIMER(Optional) Maximum number o URA Update, Cell Upda SET CONNMODETIMER(Optional) Maximum number o None SET CONNMODETIMER(Optional) Maximum number None

Maximum number of UE Behaviors in Idle M SET CONNMODETIMER(Optional) Maximum number of Cell Update SET CONNMODETIMER(Optional) Maximum number of Cell Update SET CONNMODETIMER(Optional) Maximum number Cell Update

name of the MTP3 IP RAN

SET CONNMODETIMER(Optional) SET IDLEMODETIMER(Optional)

ADD MTP3RT(Mandatory) ADD MTP3LKS(Mandatory) ADD ADJNODE(Mandatory) ADD MTP3LNK(Mandatory) ADD M3DE(Mandatory) ADD M3LE(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory) ADD M3RT(Mandatory) ADD N7DPC(Mandatory) ADD OPC(Mandatory)

ADD RACH(Optional) Upper limit of ran Power Control

ADD RACH(Optional) Lower limit of ran Power Control SET CALLSHOCKCTRL(Optional) When call shock s None SET SCTPSRVPORT(Optional) This parameter spe None ADD NODEBIP(Mandatory) NodeB ATM_TRANS None ADD NODEBIP(Mandatory) Mask of the subne None SET CALLSHOCKCTRL(Optional) When call shock st None ADD NODEBIP(Mandatory) NodeB IP_TRANS I None ADD NODEBIP(Mandatory) Mask of the subne None ADD NODEBESN(Mandatory) This parameter indi IP RAN ADD NODEBESN(Mandatory) This parameter indi IP RAN

ADD CELLALGOSWITCH(Optional) Load Control ADD CELLALGOSWITCH(Mandatory) Load Control

HSDPA_PBR_MEAS: Control HSDPA HS-DSCH Provided Bit Rate measurementHSUPA_UU_ADCTRL: Control HSUPA UU Load admission control algorithmMBMS_UU_ADCTRL: Control MBMS UU Load admission control algorithmDOFFC: Default DPCH offset configuration algorithmHSUPA_PBR_MEAS: Control HSUPA Provided Bit Rate measurementHSUPA_EDCH_RSEPS_MEAS: Control HSUPA Provided Received Scheduled EDCH Power Share measurement.EMC_UU_ADCTalgorithm will be used in downlink CAC.

ADD CELLALGOSWITCH(Optional) Load Control

ADD CELLALGOSWITCH(Optional) The algorithms with t Load Control ADD CELLALGOSWITCH(Optional) Load Control ADD CELLALGOSWITCH(Mandatory) Load Control SET WPSALGO(Optional) This parameter is u Load Control SET WPSALGO(Optional) WPS (Wireless Prio Load Control SET CALLSHOCKCTRL(Optional) When the RRC REQ t None ADD NODEBIP(Mandatory) NodeB TransTyp None ADD GSMCELL(Mandatory) Uniquely identifyin Inter-RAT Handover

Uniquely identifyin Inter-Frequency Handov ADD CELLDYNSHUTDOWN(Optional) The cell will shut None

the cell is heavily loaded in UL, this algorithm reduces the cell load in UL by using inter-frequency load handover, BE service rate reduction, uncontrollable real-time service QoS renegotiation, CS inter-RAT handover, and PS inter-RAT handover.DL_UU_LDR: DL UU load reshuffling algorithm. When the cell is heavily loaded in DL, this algorithm reduces the cell load in DL by using inter-frequency load handover, BE service rate reduction, uncontrollable real-time service QoS renegotiation, CS inter-RAT handover, and PS inter-RAT

the cells in question are in the same NodeB or used in uplink CAC.

ADD INTERFREQNCELL(Mandatory) ADD INTRAFREQNCELL(Mandatory)

None ADD GSMCELL(Optional) Indicating the net Inter-RAT Handover

When the number of MBMS Service SET INTERRATHONCOV(Optional) When this paramete Inter-RAT Handover ADD CELLSELRESEL(Optional) Maximum number of UE Behaviors in Idle M ADD N7DPC(Optional) Indicating whether None

Next hop. IP RAN ADD BAMIPRT(Mandatory) Next hop IP address None

Inter-Frequency Handov ADD OPC(Mandatory) Network Indicator. None ADD CELLSETUP(Optional) This parameter defi None ADD CNDOMAIN(Optional) This parameter sho None SET OPERATORCFGPARA(Optional) NNSF(NAS Node Sele Iu Flex, Mocn

ADD INTRAFREQNCELL(Mandatory) ADD INTERFREQNCELL(Mandatory)

ID of the RNC controlling a neighboring cell.Uniquely identifying an RNC.


ADD IPRT(Mandatory) ADD IPRTBIND(Mandatory)

ADD CELLHCSHO(Optional) SET HCSHO(Optional)

This parameter specifies a threshold for high-speed decision. After the UE reports event 1D, the UE is considered in high-mobility state if the number of changes of the best cell during [TFASTSPDEST] is larger than [NFASTSPDEST]. The smaller the

STR NODEBBWRPT(Mandatory) This parameter spe None ADD NODEBALGOPARA(Optional) Maximum number of Load Control ADD NODEBALGOPARA(Optional) Maximum number of Load Control

RMV NODEBESN(Mandatory) None

RMV NODEBIP(Mandatory) None

This parameter is IP RAN ADD NODEB(Mandatory) NodeB ID. None SET MRSCOPECTRL(Mandatory) NodeB ID. None STR NODEBBWRPT(Mandatory) This parameter spe None

Value range: 0~65535.Physical unit: None.Content: NodeB ID. Recommended value: None.

Value range: 0 to 65535 Content: NodeB IDRecommended value (default value): none

ADD ADJNODE(Mandatory) ADD NODEBIP(Mandatory) ADD NODEBESN(Mandatory) STR NODEBDETECT(Mandatory)

ADD NODEBALGOPARA(Optional) Load Control STR NODEBBWRPT(Mandatory) This parameter spe None

congestion control algorithm): When the NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action in order to reduce the NodeB level credit load.LCG_CREDIT_LDR (Cell group level credit congestion control algorithm): When the cell group level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action in order to reduce the cell group level credit load.

Name of the Node Load Control,LCS ADD NODEB(Optional) Protocol version o None STR NODEBBWRPT(Optional) This parameter spe None STR NODEBBWRPT(Optional) This parameter spe None STR NODEBBWRPT(Mandatory) This parameter spec None STR NODEBBWRPT(Mandatory) This parameter spe None STR NODEBBWRPT(Mandatory) This parameter spe None ADD NODEB(Optional) Indicating the typ None ADD NBNODESYNCMONPARA(Mandatory) Period of node syn None ADD NBNODESYNCMONPARA(Mandatory) Measurement star None ADD ADJNODE(Mandatory) UNI_AAL2SWITCH is IP RAN ADD NODEBLMTPARA(Mandatory) This parameter spec None ADD CELLSELRESEL(Optional) Indicating whether UE Behaviors in Idle M ADD CELLHSUPA(Optional) Ratio of the non-s HSUPA ADD CELLSETUP(Optional) This parameter defi None

ADD NODEB(Mandatory) ADD NBNODESYNCMONPARA(Mandatory) ADD LOCELL(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD NODEBLDR(Mandatory) ADD NODEBALGOPARA(Mandatory) ADD IPDL(Mandatory) ADD NCP(Mandatory) ADD CCP(Mandatory) ADD NODEBOLC(Mandatory)

Inter-Frequency Handov ADD INTRAFREQNCELL(Mandatory) Intra-Frequency Handov


MBMS Service ADD NRIGLBCNIDMAP(Mandatory) Iu Flex

Neighboring RNC None ADD RNCBASIC(Mandatory) None

ADD INTERFREQNCELL(Mandatory) ADD GSMNCELL(Mandatory)

The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered as the it is for the neighboring cell to be delivered as the

ADD INTERFREQNCELL(Optional) ADD INTRAFREQNCELL(Optional) ADD GSMNCELL(Optional)

combination. FALSE indicates that the neighboring cell priority is invalid, and, in the


mOffset[/PARA]. The transition between PTP and PTM affects user experience. Thus, to minimize ping-pong effect, the transition between PTP and PTM uses a threshold other than [PARA]Ncountingareas overlap, the NRI uniquely identify all the CN

ADD NRNC(Mandatory) ADD NRNCURA(Mandatory) ADD NRNCCELL(Mandatory) ADD RNCPOOLMEMBER(Mandatory)

and a half octets must be BCD code, called

None

Inter-Frequency Handov SET OPERATORCFGPARA(Optional) NullNRI VALUE. Iu Flex SET DSACAUTOALGO(Mandatory) Specifies the numbe None

OAM flow min ban Transmission Resource

ADD AAL2RT(Mandatory) ADD NODEB(Mandatory)

H'45 (indicating an E.164 address), H'39 (indicating a DCC address), or H'47 (indicating an ICD address). If the first byte is H'45, then the following seven and a half bytes (that is, 15 digits) must be a BCD code. If the following part, called DSP, are all zeros, this address is called E.164e, for example, 0x4500097150020


mobility state.After the slow speed timer times out, the UE is considered in low-mobility state if the number of changes of the best cell caused by the UE reporting of event 1D during [TSLOWSPDEST] is smaller than [NSLOWSPDEST]. The larger the value is, the more

ADD PPPLNK(Optional) SET ETHPORT(Optional) ADD MPGRP(Optional) ADD IPLOGICPORT(Optional)

SET QUEUEMAP(Mandatory) DSCP of the OAM fl Transmission Resource SET QUEUEMAP(Optional) OAM flow minimum None ADD CELLPUC(Optional) Offset of Qoffset1 Load Control ADD CELLPUC(Optional) Offset of Qoffset1 Load Control ADD CELLPUC(Optional) Offset of Qoffset2 Load Control ADD CELLPUC(Optional) Offset of Qoffset2 Load Control ADD CELLPUC(Optional) Offset of Sintersea Load Control ADD CELLPUC(Optional) Offset of Sintersea Load Control

Load Control, Iub Satell ADD CNOPERATOR(Mandatory) Cn operator type. RAN Sharing ADD TYPRABRLC(Mandatory) This parameter spe None

SET LDCPERIOD(Optional) SET SATLDCPERIOD(Optional)

the hysteresis for which the load measurement responds to the step-function signals is about 2.8s, namely that the system can trace the load control effect about 3 s later after each load control. In this case, the OLC period timer length cannot be smaller than 3s.OlcPeriodTimerLen along with ULOLCFTFRstrctUserNum, DLOLCFTFRstrctUserNum, ULOLCFTFRSTRCTTimes, DLOLCFTFRSTRCTTimes, ULOLCTraffRelUserNum, and DLOLCTraffRelUserNum determine the time it takes to release the uplink/downlink

SET COPTLNK(Optional) This parameter spe None SET SMLC(Optional) This parameter spec LCS SET OPT(Optional) This parameter indi None ADD SMLCCELL(Mandatory) Azimuth of the semi LCS LOD PATCH(Optional) This parameter ind None ADD SMLCCELL(Optional) Flag of OTDOA loca LCS SET SMLC(Optional) UE positioning m LCS ADD NRNCCELL(Optional) None ADD AAL2PATH(Optional) Ownership of the Transmission Resource ADD AAL2RT(Optional) Indicating whether None ADD IPPATH(Optional) For IUPS Path,thi IP RAN LOP VCL(Mandatory) AAL2 path ID. None

Identifying an AA Transmission Resource

Identifying an IP p Transmission Resource ADD IPPATH(Optional) Type of the IP path Transmission Resource LOD PATCH(Mandatory) This parameter ide None ADD PCH(Optional) Offset of the PCH t Power Control

TX power of the PC Power Control ADD CELLLDB(Optional) Pilot power adjustm Load Control

frequency handover. When

ADD AAL2PATH(Mandatory) ACT VCLCC(Mandatory)

ADD IPPATH(Mandatory) ACT IPPM(Mandatory) ADD IPPATHBIND(Mandatory)

ADD PCPICH(Optional) ADD QUICKCELLSETUP(Optional)

ADD ATMTRF(Optional) None

SET CORRMALGOSWITCH(Optional) Power Control ADD M3LKS(Optional) PENDING time leng None

indicates the maximum rate of ATM traffic.(1. Physical unit: cell/s or kbit/s.2. PCR must not exceed the maximum bandwidth of the carrier such as the IMA group, UNI link or optical port.3. Different service types with different value ranges.CBR:71 to 353207 (UT = CELL/S)/30 to 149759 (UT = KBIT/S);RTVBR/NRTVBR/UBR:71~70754(UT=CELL/S)/30~30000(current RLS number through the FP inband signaling. 6) PC_HSUPA_HARQNUM_AUTO_ADJUST_SWITCH: When the switch is selected, the HSUPA service can use the smaller target number of retransmissions when the uplink is not congested. If the uplink is congested, the HSUPA service can use the typical target number of retransmissions.7) PC_HSUPA_PO_UPDATE_SWITCH: When this switch and the OLPC switch are both selected, the RNC periodically adjust the power offset of the HSUPA E-DCH.

ACT ETHOAMAH(Optional) This parameter sp None

ACT ETHOAMAH(Optional) None

Indicating Corre None ADD MPGRP(Mandatory) Peer IP address o None STR IPLOPTST(Mandatory) This parameter indi None ADD SCTPLNK(Mandatory) First destination I IP RAN ADD SCTPLNK(Optional) Second destination IP RAN LOP VCL(Mandatory) Peer IP address o None ADD IPOAPVC(Mandatory) This parameter indi IP RAN ACT VCLCC(Mandatory) This parameter ind IP RAN ADD IPPATH(Mandatory) Peer IP address. T IP RAN

Indicating Peer Cel None ADD IPPATH(Optional) Peer subnet mask. IP RAN ADD NODEB(Mandatory) Indicating Corre None ADD SCTPLNK(Mandatory) Destination port of IP RAN ADD NODEB(Mandatory) Indicating Peer None ADD IPOAPVC(Mandatory) Indicate the peer None

ADD CELLINTERRATHOCOV(Optional) Inter-RAT Handover

This parameter specifies the length of an EthOAM PDU packet.

ADD QUICKCELLSETUP(Mandatory) ADD CELLSETUP(Mandatory)

ADD QUICKCELLSETUP(Optional) ADD CELLSETUP(Optional)

Strech for penalty of Inter-Rat handover failure due to physical channel failure. No try of Inter-Rat handover will be taken until penalty finishes.Also see parameter InterRatPhyChFailNum.

ADD CELLINTERRATHONCOV(Optional) Inter-RAT Handover

SET INTERRATHOCOV(Optional) Inter-RAT Handover



SET INTERRATHONCOV(Optional) Inter-RAT Handover

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover ADD TYPRABDCCCMC(Optional) This parameter spec DCCC ADD TYPRABDCCCMC(Optional) This parameter spec DCCC



ADD TYPRABRLC(Optional) This parameter spec Radio Bearers ADD TYPRABRLC(Optional) This parameter spec Radio Bearers ADD IPPATH(Optional) IP Path Ping Period IP RAN



Inter-RAT Handover

Inter-RAT Handover

This parameter spec Intra-Frequency Handov


the more frequent the handover retry due to inter-frequency handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored,


The smaller the value of this parameter, the more frequent the handover retry due to inter-frequency handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored. In


the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored,


the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored,




Period common meas Load Control, Iub Satell ADD PRACHASC(Mandatory) It is used to calc None

Protocol field comp None ACT IPPM(Mandatory) Automatic IPPM w None SET PHBMAP(Mandatory) PHB value. None





Uniquely identifyi None ADD CELLMCCH(Mandatory) ID of the physical MBMS Service ADD PICH(Optional) Uniquely identifyin None ADD PICH(Optional) Indicating the num None ADD CHPWROFFSET(Optional) Difference between Power Control STR IPLOPTST(Mandatory) This parameter ind None STR ETHOAMLOOPTST(Optional) This parameter spe None STR ETHOAMLOOPTST(Optional) This parameter spe None STR IPLOPTST(Optional) This parameter ind None PING IP(Optional) This parameter spec None PING MAC(Optional) This parameter spec None

ADD SCCPCHBASIC(Mandatory) ADD PCCPCH(Optional) ADD AICH(Optional) ADD RACH(Optional) ADD PCPICH(Optional) ADD SCCPCHTFC(Mandatory) ADD PCH(Mandatory) ADD PRACHACTOASCMAP(Optional) ADD PRACHSLOTFORMAT(Optional) ADD PRACHASC(Optional) ADD PICH(Mandatory) ADD FACH(Mandatory) ADD PRACHTFC(Optional) ADD PRACHBASIC(Optional) ADD PSCH(Optional) ADD SSCH(Optional)

Maximum PLMN tag v None

Minimum PLMN tag v None ADD IPLOGICPORT(Optional) Period of packet l Transmission Resource ADD IPLOGICPORT(Optional) Threshold of packet Transmission Resource ACT IPPM(Optional) This parameter ind None

This parameter indi IP RAN,Transmission R SET SCUPORT(Optional) Number of the port None ACT ETHOAMAH(Mandatory) For the FG2a board None ADD ETHMEP(Optional) This parameter spe None STR ETHOAMLOOPTST(Mandatory) This parameter spec None STR IPCHK(Mandatory) Number of the Ethe IP RAN SET ALMPORT(Mandatory) This parameter spec None ADD ROLLBACKPOINT(Optional) Rollbackpoint Desc None ADD ROLLBACKPOINT(Mandatory) Rollbackpoint Nam None

SET QUEUEPREEMPT(Optional) Timer length of the Load Control

ADD LAC(Mandatory) ADD RAC(Mandatory)

ADD LAC(Mandatory) ADD RAC(Mandatory)

ACT MSP(Optional) SET OPT(Optional)

ADD SAALLNK(Optional) Interval for sendin None ADD FTPSCLTDPORT(Mandatory) This port is provid None ADD PORTFLOWCTRLPARA(Mandatory) Port flow control t Transmission Resource ADD ETHMEP(Mandatory) This parameter spe None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None MOD EMU(Optional) This parameter spec None ADD PRACHTFC(Mandatory) The power offset be Power Control ADD PRACHBASIC(Optional) The power increase Power Control ADD NODEBESN(Mandatory) This parameter spe None ADD IPLOGICPORT(Mandatory) This parameter ind Transmission Resource

Number of the PPP None

PPP link multifram None ADD PORTFLOWCTRLPARA(Mandatory) This parameter is Transmission Resource ADD AICH(Optional) Uniquely identifyi None

ADD PPPLNK(Optional) RST PPPLNK(Mandatory) ADD MPLNK(Mandatory) RST MPLNK(Mandatory) RMV PPPLNK(Mandatory) RMV MPLNK(Mandatory)


Inter-Frequency Handov ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov ADD PRACHBASIC(Optional) The maximum number Power Control ADD PRACHBASIC(Mandatory) Sequence No. of an None SET QUEUEPREEMPT(Optional) Indicating whether Load Control SET QUEUEPREEMPT(Optional) Indicating whether Load Control ADD IPRT(Mandatory) Priority of route. IP RAN

Priority of the sign None

Route priority. 0 in None BLK CELL(Optional) None SET USERPRIORITY(Optional) Load Control ADD SPG(Optional) This parameter spec Load Control ADD SPG(Optional) This parameter spec Load Control ADD SPG(Optional) This parameter spec Load Control ADD SPG(Optional) This parameter spec Load Control ADD SPG(Optional) This parameter spec Load Control ADD RNCALLCELLBLK(Mandatory) This parameter spec UE Behaviors in Idle M


C_REPORT" be set, upon which the UE behaviour is not defined.This parameter has impact on the Uu signaling flow. If the interval is too short and the frequency is too high, the RNC configured value. However, it is not

ADD MTP3LNK(Optional) ADD M3LNK(Optional)

ADD MTP3RT(Optional) ADD M3RT(Optional)

once there are no users in it within a specified time, or streaming > interactive >

SET RRCTRLSWITCH(Mandatory) Inter-RAT Handover, IM

10)CR2284R1_SWITCH.in section 8.6.6.28 of TS25.331 of R5 Before 2006, it describes that the HFN should add one when UE is ciphering in the situation of Timing re-initialized hard handover,while not specified in RB SETUP process in the section of 8.6.4.3. so it is not clear whether to add or not in RB SETUP in DRD scenarios.CR2284R1 clarify that HFN should add one in RB SETUP process with Timing re-initialized hard handover.when it is checked ,RNC accepts this CR2284R1;when it is not checked ,RNC does not accept

ADD N7DPC(Optional) None SET PSINACTTIMER(Optional) If the background Radio Bearers SET PSINACTTIMER(Optional) If the Conversatio Radio Bearers SET PSINACTTIMER(Optional) Radio Bearers SET PSINACTTIMER(Optional) If the Interactive Radio Bearers

SET PSINACTTIMER(Optional) If the Streaming R Radio Bearers

SS7 protocol type supported by the DSP.ITUT: International Telecommunication Union - Telecommunication Standardization SectorANSI: American National Standards InstituteTTC: THE TELECOMMUNICATION TECHNOLOGY COMMITTEE (use for JAPAN).

release request to RRC layer, if the

SET OPT(Mandatory) Type of Port Select None ADD NRNC(Optional) Indicating whethe SRNS Relocation ADD TRMFACTOR(Optional) R99 PS background Iub Overbooking ADD TRMMAP(Optional) R99 PS background Transmission Resource ADD LOADEQ(Optional) R99 PS background Transmission Resource ADD TRMMAP(Optional) R99 PS background Transmission Resource ADD LOADEQ(Optional) R99 PS background Transmission Resource ADD TRMFACTOR(Optional) R99 PS background Iub Overbooking ADD PSCH(Optional) Offset of the PSCH Power Control ADD TRMFACTOR(Optional) R99 PS conversatio Iub Overbooking ADD TRMMAP(Optional) R99 PS conversatio Transmission Resource ADD LOADEQ(Optional) R99 PS conversatio Transmission Resource ADD TRMMAP(Optional) R99 PS conversatio Transmission Resource ADD LOADEQ(Optional) R99 PS conversatio Transmission Resource ADD TRMFACTOR(Optional) R99 PS conversatio Iub Overbooking

Sequence No. of a None ADD LOADEQ(Optional) R99 PS high priorit Transmission Resource ADD LOADEQ(Optional) R99 PS high priorit Transmission Resource

Inter-RAT Handover SET PSINACTTIMER(Optional) When detecting tha Radio Bearers SET PSINACTTIMER(Optional) When detecting tha Radio Bearers SET PSINACTTIMER(Optional) When detecting tha Radio Bearers SET PSINACTTIMER(Optional) When detecting tha Radio Bearers

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD NRNCCELL(Mandatory)


threshold. When the GSM load policy is used, that is, when [NcovHoOn2GldInd] in SET INTERRATHONCOV is set to ON, the PS domain inter-system relocation out process will be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the PS domain Reloc

SET PSINACTTIMER(Optional) When detecting tha Radio Bearers SET OPERATORCFGPARA(Optional) Indicating whether Iu Flex SET OPERATORCFGPARA(Mandatory) Ps Information Upd Iu Flex ADD TRMFACTOR(Optional) R99 PS interactive Iub Overbooking ADD TRMFACTOR(Optional) R99 PS interactive Iub Overbooking ADD TRMMAP(Optional) R99 PS high PRI in Transmission Resource ADD TRMMAP(Optional) R99 PS high PRI in Transmission Resource ADD TRMMAP(Optional) R99 PS low PRI int Transmission Resource ADD TRMMAP(Optional) R99 PS low PRI int Transmission Resource ADD TRMMAP(Optional) R99 PS middle PRI Transmission Resource ADD TRMMAP(Optional) R99 PS middle PRI Transmission Resource ADD LOADEQ(Optional) R99 PS low priorit Transmission Resource ADD LOADEQ(Optional) R99 PS low priority Transmission Resource ADD LOADEQ(Optional) R99 PS middle prio Transmission Resource ADD LOADEQ(Optional) R99 PS middle prio Transmission Resource SET OPERATORCFGPARA(Optional) PS NRI(Network Res Iu Flex, Mocn SET OPERATORCFGPARA(Mandatory) NRI length for PS Iu Flex, Mocn SET KPIALMTHD(Optional) PS drop ratio Per S None SET KPIALMTHD(Optional) The number of Ps R None SET KPIALMTHD(Optional) Ps Rab successful s None SET KPIALMTHD(Optional) The number of PS re None SET DSACAUTOALGO(Mandatory) Whether to impose None ADD CELLHOCOMM(Optional) Inter-RAT Handover ADD TRMFACTOR(Optional) R99 PS streaming s Iub Overbooking ADD TRMMAP(Optional) R99 PS streaming Transmission Resource ADD LOADEQ(Optional) R99 PS streaming b Transmission Resource ADD TRMMAP(Optional) R99 PS streaming Transmission Resource ADD LOADEQ(Optional) R99 PS streaming p Transmission Resource ADD TRMFACTOR(Optional) R99 PS streaming s Iub Overbooking

inter-RAT handover are

SET CORRMALGOSWITCH(Optional) Radio Bearers, Configur ACT LICENSE(Optional) The total PS throug None SET ALMPORT(Mandatory) This parameter spec None ADD NODEBESN(Mandatory) IP address of the None ADD NODEBESN(Mandatory) Mask of the subnet None SET RNCMBMSPARA(Optional) This parameter sp MBMS Service SET RNCMBMSPARA(Optional) This parameter spe MBMS Service SET RNCMBMSPARA(Optional) This parameter sp MBMS Service SET ETHPORT(Mandatory) This parameter indi None

Length of smoothin Load Control, Iub Satell

Identifying the pot Load Control, Iub Satell SET RNCMBMSPARA(Optional) This parameter spec MBMS Service SET FRC(Optional) This parameter is Power Control SET QUEUEMAP(Optional) Minimum DSCP valu None SET QUEUEMAP(Optional) Minimum DSCP valu None SET QUEUEMAP(Optional) Minimum DSCP valu None SET QUEUEMAP(Optional) Minimum DSCP valu None SET QUEUEMAP(Optional) Minimum DSCP valu None

PS_BE_IU_QOS_NEG_SWITCH: When the switch is selected, the Iu QoS Negotiation function is applied to the PS BE service if Alternative RAB Parameter Values IE is present in the RANAP RAB ASSIGNMENT REQUEST or RELOCATION REQUEST message. 4) PS_RAB_DOWNSIZING_SWITCH: When the switch is selected and the RAB downsizing license is activated, the initial speed is determined on the basis of cell resources. Downsizing is implemented for BE services.5) PS_RSC_FEEDBK_RABSETUP_C


SET LDCPERIOD(Optional) SET SATLDCPERIOD(Optional)

ADD ADJNODE(Optional) Function set suppo IP RAN

Quality threshold o UE Behaviors in Idle M ADD CELLSELRESEL(Optional) URA Update, Cell Updat ADD CELLSELRESEL(Optional) URA Update, Cell Updat ADD CELLSELRESEL(Optional) URA Update, Cell Updat ADD CELLSELRESEL(Optional) URA Update, Cell Updat ADD GSMNCELL(Optional) UE Behaviors in Idle M

The minimum requir URA Update, Cell Updat ADD NRNCCELL(Optional) This parameter in UE Behaviors in Idle M ADD GSMNCELL(Optional) UE Behaviors in Idle M

The minimum requir UE Behaviors in Idle M

Indicating whether UE Behaviors in Idle M ADD NRNCCELL(Optional) This parameter in UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Measurement quanti URA Update, Cell Updat SET QUEUEPREEMPT(Optional) Indicating whether Load Control SET QUEUEPREEMPT(Optional) Queue length. The t Load Control


measurement. This parameter is not configured measurement. This parameter is measurement. This parameter is not configured measurement. This parameter is selecting inter-RAT neighboring cells. The smaller


than this parameter, this


ADD CELLSELRESEL(Optional) ADD NRNCCELL(Optional)

This parameter spec DCCC, AMRC, AMRC SET COIFTIMER(Optional) The timer is start Radio Bearers

Identifying a rout Inter-RAT Handover ADD PRACHBASIC(Mandatory) Sequence No. of an None SET IUTIMERANDNUM(Optional) A timer used to wa None SET OPERATORSHARINGMODE(Optional) when RAN Sharing RAN Sharing ADD GSMCELL(Mandatory) Identifying the t Inter-RAT Handover SET IUTIMERANDNUM(Optional) A timer used to re None

ADD TYPRABOLPC(Mandatory) ADD TYPRABDCCCMC(Mandatory) ADD TYPRABRLC(Mandatory) ADD TYPRABHSPA(Mandatory) ADD TYPRABBASIC(Mandatory) ADD TYPRABQUALITYMEAS(Mandatory)

ADD RAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD GSMCELL(Mandatory) ADD NRNCCELL(Mandatory)

The rate matching Channel Description ADD CELLOLC(Optional) DL fast TF restric Load Control ADD CELLOLC(Optional) DL fast TF restrict Load Control ADD CELLOLC(Optional) DL fast TF restric Load Control

The target rollback None BEG FORWARD(Mandatory) LASTRBP: the last None SET STATETIMER(Optional) A timer used to wa Radio Bearers SET STATETIMER(Optional) A timer to RNC wai Radio Bearers SET STATETIMER(Optional) A timer to RNC wai Radio Bearers ADD IPLOGICPORT(Optional) Rate down coefficie Transmission Resource SET RNCMBMSPARA(Optional) This parameter spe MBMS Service ADD CELLOLC(Optional) DL fast TF restrict Load Control

ADD IPLOGICPORT(Optional) Threshold of rate None ADD BRD(Mandatory) This parameter ind None


ADD FACH(Optional) ADD RACH(Optional) ADD PCH(Optional)

BEG FORWARD(Mandatory) BEG ROLLBACK(Mandatory)

SET DRD(Optional) ADD CELLDRD(Optional) SET REDIRECTION(Optional) ADD CELLREDIRECTION(Optional)

When the UL load st Load Control

When the load of th Load Control

This parameter sp Load Control

SET REDIRECTION(Optional) ADD CELLREDIRECTION(Optional)



This parameter spe Load Control


Load Control

Load Control SET CLK(Optional) This parameter spec None SET CLK(Optional) This parameter spe None SET CLK(Optional) This parameter spe None SET CALLSHOCKCTRL(Optional) Indicating whether None SET POOLPRIMHOSTPOLICY(Optional) Re-host Policy Typ None SET AAL2TMR(Optional) This timer is star None SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation


2562, 2587, 2612, 2637, 2662, 2687}Band8:Common frequencies: [2712-2863]Special frequencies: noneBand9:Common frequencies: [8762-8912]Special frequencies: noneBandIndNotUsed: [0-16383]Assume that the target uplink UARFCN for RRC redirection is unspecified, the band indication is Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, or Band9, and the target downlink UARFCN for RRC redirection is valid. Then, the default target uplink UARFCN for RRC redirection is as


of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured.- FALSE: The UL frequency does not need to be configured. It is configured automatically according to the

SET STATETIMER(Optional) A timer used for d SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET STATETIMER(Optional) A timer to RNC wai SRNS Relocation SET AAL2TMR(Optional) This timer is star None

SET INTRAFREQHO(Optional) Intra-Frequency Handov

direct SHO rate reduction isnew > Mbest_cell - RelThdForDwnGrdwhere Mnew: the CPICH Ec/No measurement value of the failed cell1 Mbest_cell: the CPICH Ec/No measurement value in the latest measurement report of the best cell identified by the RNC according to 1D RelThdForDwnGrd: the relative threshold for direct rate reduction. It can be configured on the BAM server.Note: The smaller the value of this parameter, the harder it is to trigger SHO rate

This parameter desc IP RAN

Use description. Transmission Resource SET RNCCBPARA(Optional) Repeat Number of CBS SET RNCCBPARA(Optional) Repeat Period of s CBS



ADD IPRT(Optional) ADD ATMTRF(Optional)

ADD LOADEQ(Mandatory) ADD TRMMAP(Optional) ADD TRMFACTOR(Mandatory)



This parameter spec Intra-Frequency Handov ADD TYPRABBASIC(Mandatory) This parameter spe Inter-RAT Handover SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET CORRMALGOSWITCH(Optional) CORRM Algo reserve None SET AAL2TMR(Optional) This timer is star None

Restart timer lengt None ADD TYPRABRLC(Optional) This parameter spec Radio Bearers SET FRC(Optional) Each bit indicates HSDPA, HSUPA ADD TYPRABRLC(Mandatory) Radio Bearers

This parameter def None ADD CELLRLPWR(Mandatory) This parameter sho Power Control, DCC ADD CELLRLPWR(Mandatory) This parameter sho Power Control, DCC SET STATETIMER(Optional) A timer to RNC wait None SET STATETIMER(Optional) A timer to RNC wait None SET STATETIMER(Optional) A timer to RNC wait None SET STATETIMER(Optional) A timer to RNC wait None RST IUR(Mandatory) Uniquely identify None ADD RNCBASIC(Mandatory) Uniquely identify None



According to the configuration, the data with errors is ADD FACHDYNTFS(Mandatory)

ADD PCHDYNTFS(Mandatory) ADD RACHDYNTFS(Mandatory)

Uniquely identify LCS

This paramater uni None ADD CBSADDR(Mandatory) IP address of the None ADD NRNC(Mandatory) Neighboring RNC p None

ADD IPLOGICPORT(Optional) Threshold of rate None SET RRCESTCAUSE(Mandatory) This parameter sp Radio Bearers SET KPIALMTHD(Optional) The number of Rrc None SET KPIALMTHD(Optional) Rrc connection succ None SET STATETIMER(Optional) Wait time in RRC c None SET STATETIMER(Optional) A timer used to wai None SET STATETIMER(Optional) A timer used to wa None

ADD CELLINTRAFREQHO(Mandatory) ADD INTRAFREQNCELL(Mandatory) ADD INTERFREQNCELL(Mandatory) ADD GSMNCELL(Mandatory) ADD SMLCCELL(Mandatory)

ADD GPS(Mandatory) RST RNC(Mandatory)

SET STATETIMER(Optional) A timer used to wa None SET STATETIMER(Optional) A timer used to None SET STATETIMER(Optional) A timer used to wa None SET STATETIMER(Optional) A timer to RNC wa None SET STATETIMER(Optional) A timer used to w None ADD AAL2PATH(Mandatory) This field indicat Transmission Resource ADD AAL2PATH(Mandatory) Number of the res Transmission Resource ADD IPPATH(Mandatory) Number of the reso Transmission Resource

Resource manageme Transmission Resource ADD ATMLOGICPORT(Optional) Resource managem Transmission Resource ADD NODEB(Optional) Indicating the re None LCK CMCTRL(Mandatory) Reason to lock CM None

ADD SAALLNK(Optional) No-Response Time None

RST IU(Mandatory) None ADD OPC(Optional) ON is open this fu None SET IUTIMERANDNUM(Optional) The times of resend None RST IUR(Mandatory) RNC Type to be res None SET RRCTRLSWITCH(Optional) Reserved parameter None ADD NRNC(Optional) Reserved parameter None ADD CNNODE(Optional) Reserved parameter None SET DEVPATCHPARA(Optional) Parameter 1 reserve None

ADD IPLOGICPORT(Mandatory) ADD RSCGRP(Mandatory)

CN reset type.1. ALL_NODES: resetting all CN nodes2. BY_CNID: resetting the CN nodes specified by [CN ID]

Reserved paramete Load Control SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 10 reserv None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None SET DPUCFGDATA(Optional) This parameter spa None ADD NRNC(Optional) Reserved parameter None ADD CNNODE(Optional) Reserved parameter None SET DEVPATCHPARA(Optional) Parameter 2 reserve None

Reserved paramete Load Control SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 3 reserve None

ADD CELLALGOSWITCH(Optional) ADD NODEBALGOPARA(Optional) SET CACALGOSWITCH(Optional)


Reserved paramete Load Control SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 4 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 5 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 6 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 7 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 8 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET DEVPATCHPARA(Optional) Parameter 9 reserve None SET DPUCFGDATA(Optional) This parameter spa None SET MSP(Optional) This parameter ind None

Different types of None ADD CNNODE(Optional) The rate of RTCP b None SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC ADD CNNODE(Optional) Whether to support None ADD BAMIPRT(Mandatory) Destination IP addr None ADD BAMIPRT(Mandatory) Route mask. None SET UESTATETRANSTIMER(Optional) Timer for state tr DCCC SET UESTATETRANSTIMER(Optional) Timer for state tra DCCC SET UESTATETRANS(Optional) Pending time after DCCC SET UESTATETRANS(Optional) Traffic volume 4b DCCC SET UESTATETRANS(Optional) Time to trigger th DCCC


ADD M3LE(Optional) ADD M3DE(Optional)




SET UESTATETRANS(Optional) Traffic volume 4a DCCC SET UESTATETRANS(Optional) Time to trigger th DCCC ADD SCTPLNK(Optional) It is used to calcu None ADD SCTPLNK(Optional) It is used to calcu None ADD SCTPLNK(Optional) When [RTO max valu None ADD SCTPLNK(Optional) When [RTO max value None ADD SCTPLNK(Optional) When [RTO max value None ADD AAL2RT(Optional) Route index, a logi None

ADD IPLOGICPORT(Optional) Rate up step of the Transmission Resource ADD IPLOGICPORT(Optional) Period of rate up s Transmission Resource ADD ATMLOGICPORT(Mandatory) Backward bandwid Transmission Resource ADD IPPATH(Mandatory) Backward bandwidth Transmission Resource ADD RSCGRP(Mandatory) This parameter is Transmission Resource

Receive traffic re Transmission Resource

SET HOCOMM(Optional) Intra-Frequency Handov

SET HOCOMM(Optional) When the time diff Intra-Frequency Handov LOP VCL(Mandatory) Number of the SAA None

ADD SAALLNK(Mandatory) ADD AAL2PATH(Mandatory) ADD VPCLCX(Mandatory) ADD IPOAPVC(Optional)

power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE Rx-Tx time difference

Number of the SAA IP RAN ADD SAALLNK(Mandatory) Interface type of t None SET MTP3TMR(Optional) SAAL link connecti None

PLMN-Id, LAC and S LCS ADD NODEB(Optional) Indicating whether None ADD SCCPCHBASIC(Optional) None SET MRSCOPECTRL(Mandatory) List Type. None

ADD SAALLNK(Mandatory) ADD MTP3LNK(Mandatory) ADD ADJNODE(Mandatory) ACT VCLCC(Mandatory) ADD CCP(Mandatory) ADD NCP(Mandatory)

ADD SAC(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD CZ(Mandatory)

two consecutive CFNs. In the

ADD ATMTRF(Optional) This parameter indi None ADD SCCPCHBASIC(Mandatory) Scrambling code of None

Scrambling switch. None

Number of the SCT IP RAN SET TZ(Mandatory) Start date of the D None SET MSP(Optional) This parameter ind None SET MSP(Optional) This parameter indi None ADD IPDL(Mandatory) Seed of the pseudo LCS STR NODEBDETECT(Optional) NodeB Detect Typ None ADD CELLOLC(Optional) This parameter ind Load Control, MBMS Se

SET E1T1(Optional) SET OPT(Optional)

ADD SCTPLNK(Mandatory) ADD M3LNK(Mandatory) ADD CCP(Mandatory) ADD NCP(Mandatory)

ADD FTPSCLTDPORT(Mandatory) This IP address is None ADD PPPLNK(Mandatory) Server name for CH None


Load Control SET MBMSPERF(Mandatory) Uniquely identify MBMS Service ADD NRNC(Mandatory) Indicating whether None

This parameter spe MBMS Service ADD ADJNODE(Mandatory) This parameter is IP RAN

ADD CELLMBMSSCCPCH(Mandatory) SET MBMSSCCPCH(Mandatory) ADD CELLMBMSFACH(Mandatory) SET MBMSFACH(Mandatory) SET MTCH(Mandatory)


differential DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Service

ADD CELLMBMSSCCPCH(Mandatory) SET MBMSSCCPCH(Mandatory) ADD CELLMBMSFACH(Mandatory) SET MBMSFACH(Mandatory) SET MTCH(Mandatory)

SET CTRLPLNSHAREPARA(Optional) Numbers of incomin Flow Control ADD NODEB(Mandatory) Sharing Type Of None ADD CELLHCS(Optional) Inter-system HCS ce UE Behaviors in Idle M ADD TYPRABBASIC(Mandatory) None SET INTRAFREQHO(Optional) Intra-Frequency Handov SET INTRAFREQHO(Optional) This parameter spec Intra-Frequency Handov

Intra-Frequency Hando

is performed so long as 2G signals are available.handover to join the active set through the soft

ADD CELLINTRAFREQHO(Optional) SET INTRAFREQHO(Optional) SET SMLC(Mandatory)

the absolute quality. If the signal quality of added cells is too poor, the general quality of the active set cannot be obviously improved, but more downlink resources are occupied and more TPC errors are caused, and the soft handover performance is worsened. Therefore, there should be a baseline for the quality of the radio links to be added.As for the impact on network performance:Adjust this parameter according to the Ec/Io that the cell soft handover area reaches as expected at network planning.

ADD NRNC(Mandatory) Intra-Frequency Handov


UE Behaviors in Idle M ADD CELLSIBSWITCH(Optional) Determine whether s None SET RRCESTCAUSE(Optional) Radio Bearers

Index of the signall None ADD M3LNK(Mandatory) M3UA link code i None ADD FACH(Optional) Indicating whether None ADD MTP3LNK(Mandatory) Signalling link cod None


interface. 2) HSPA_SHO_SWI

ADD INTRAFREQNCELL(Optional) ADD INTERFREQNCELL(Optional) ADD GSMNCELL(Optional)

indicates whether the neighboring cell information is delivered in SIB11. FALSE:


indicates whether the neighboring cell information is delivered in SIB12. FALSE:

DCH_6.8K_SIGNALLING: The

ADD MTP3LKS(Mandatory) ADD MTP3LNK(Mandatory) ADD MTP3RT(Mandatory) ADD M3RT(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory)


Maximum rate of t AMRC SET USERMBR(Optional) This parameter spe Transmission Resource SET USERMBR(Optional) This parameter spe Transmission Resource PING IP(Mandatory) This parameter spec None ADD TRMFACTOR(Optional) IMS SRB service d Iub Overbooking ADD TRMMAP(Optional) IMS SRB primary p Transmission Resource ADD LOADEQ(Optional) IMS Signal bearing Transmission Resource ADD TRMMAP(Optional) IMS SRB secondary Transmission Resource ADD LOADEQ(Optional) IMS Signal primary Transmission Resource ADD TRMFACTOR(Optional) IMS SRB service up Iub Overbooking ADD CELLHCS(Optional) The UE does not sta UE Behaviors in Idle M ADD SCCPCHBASIC(Mandatory) This parameter def None ADD PRACHSLOTFORMAT(Optional) Sequence number of None ADD PRACHSLOTFORMAT(Optional) Sequence number of None ADD PRACHSLOTFORMAT(Optional) Sequence number of None ADD PRACHSLOTFORMAT(Optional) Sequence number of None ADD PRACHSLOTFORMAT(Mandatory) Number of availabl None ADD N7DPC(Optional) The signalling rou None SET TZ(Mandatory) Type of the start da None SET SMLC(Optional) Method of position LCS MOD EMU(Optional) This parameter spe None SET TZ(Mandatory) Start month of the None CLR MSPREP(Mandatory) This parameter ind None RMV FRALNK(Mandatory) number of the slot None RMV IMAGRP(Mandatory) Number of the slot None RMV UNILNK(Mandatory) This parameter spec None RMV IMALNK(Mandatory) Number of the slot None UIN BRD(Optional) This parameter ind None RMV PPPLNK(Mandatory) number of the slot None


RMV MPGRP(Mandatory) None RMV MPLNK(Mandatory) This parameter spec None ACT FAN(Mandatory) This parameter ind None ADD IPPATHBIND(Mandatory) This parameter ind None ADD IPRTBIND(Mandatory) This parameter ind None ACT ETHOAMAH(Mandatory) This parameter ind None ADD ETHMD(Mandatory) This parameter ind None RMV ETHMD(Mandatory) This parameter indi None ADD ETHMA(Mandatory) This parameter ind None ADD ETHMEP(Mandatory) This parameter ind None ACT ETHCC(Mandatory) This parameter ind None

This parameter ind None STR ETHOAMLOOPTST(Mandatory) This parameter indi None ADD ETHTRK(Mandatory) This parameter ind None RMV ETHTRK(Mandatory) This parameter spec None ADD ETHTRKLNK(Mandatory) This parameter ind None ADD ETHTRKIP(Mandatory) This parameter ind None RMV ETHTRKIP(Mandatory) This parameter ind None SET BFDPROTOSW(Mandatory) This parameter spec None STR IPCHK(Mandatory) This parameter ind None STR NODEBBWRPT(Mandatory) This parameter spe None ADD IPLOGICPORT(Mandatory) This parameter ind Transmission Resource RMV IPLOGICPORT(Mandatory) This parameter indi None ADD FLOW(Mandatory) This parameter ind None

Number of the slotValue range: 0 to 27Content: number of the slot where the board is locatedRecommended value (default value): none


Number of the SPU IP RAN,Transmission SET PHBMAP(Mandatory) Slot Number of P None ADD MTP3LNK(Mandatory) Number of the slot None

STR CPUUSAGETST(Mandatory) LOP VCL(Mandatory) STR IMATST(Mandatory) SET E1T1LOP(Mandatory) LOP E1T1(Mandatory) STR E1T1TST(Mandatory) LOD PATCH(Optional) SET OPTLOP(Mandatory) RST MPLNK(Mandatory) ULD RSTINFO(Mandatory) PING IP(Mandatory) TRC IPADDR(Mandatory) RST PPPLNK(Mandatory) SWP ETHPORT(Mandatory) ADD BRD(Optional) SET QUEUEMAP(Mandatory) SET CLK(Mandatory) SET E1T1(Mandatory) SET MSP(Mandatory) ACT MSP(Mandatory) ADD FRALNK(Mandatory) ADD TSCROSS(Mandatory) ADD IMAGRP(Mandatory) ADD UNILNK(Mandatory) ADD IMALNK(Mandatory) INH BRD(Optional) ADD DEVIP(Mandatory) ADD IPRT(Mandatory) ACT VCLCC(Mandatory) ADD ATMLOGICPORT(Mandatory) SET OPT(Mandatory) SET COPTLNK(Mandatory) ACT ETHPORT(Mandatory) SET ETHPORT(Mandatory)

RSPU slot No. LCS SET MRSCOPECTRL(Mandatory) The Slot No. None

SPU/MPU Slot No None

Sharing Network A IMSI-Based Handover

ADD IMSISNAMAP(Mandatory) IMSI-Based Handover SET INTERRATHONCOV(Optional) When it is set to Inter-RAT Handover

ADD OPC(Optional) The OSP should be None ADD OPC(Mandatory) Indicating the num None ADD OPC(Optional) The OSP should be None ADD CELLHCSHO(Optional) Inter-Frequency Handov

Signal point data f None

ADD CBSADDR(Mandatory) SET NCELLDETECTSWITCH(Mandatory) ADD IURCOMMSCCP(Mandatory) ADD NODEB(Mandatory)

ACT CRC(Optional) CMP TBLDATA(Mandatory)

ADD LASNAMAP(Mandatory) ADD IMSISNAMAP(Mandatory)

Indicating whether the SNAC need be configured. TRUE: The SNAC need be configured. FALSE: The SNAC need not be configured.UE can access any cell of the PLMN.

The UE speed estimation cannot be triggered even ADD N7DPC(Optional)

ADD OPC(Optional)

SET ETHPORT(Optional) Transmission rate None ADD CELLSELRESEL(Optional) For a high-mobilit UE Behaviors in Idle M

This parameter iden Load Control,HCS Hand

This parameter indi HSDPA, HSUPA,Iub Ov STR IPLOPTST(Mandatory) This parameter indi None

ADD CELLPUC(Optional) Load Control

ADD CELLPUC(Optional) Hysteresis used to Load Control

ADD SPG(Mandatory) ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory)

SET SPIFACTOR(Mandatory) SET SCHEDULEPRIOMAP(Mandatory)

ratio of NodeB TX power to the maximum TX power.If the load of a cell is equal to or higher than this threshold, the load level of this cell is heavy.If the load level of a cell is heavy, the PUC algorithm will configure selection/reselection parameters for this cell to lead the UE camping on

ADD CELLPUC(Optional) Load Control SET SPUSHARETHD(Optional) The threshold used Flow Control SET FRCCHLTYPEPARA(Optional) Radio Bearers, HSDPA SET FRCCHLTYPEPARA(Optional) Radio Bearers, HSDPA ADD TRMFACTOR(Optional) SRB service downli Iub Overbooking ADD CELLEFACH(Optional) Guaranteed rate o HSPA+ ADD CELLEFACH(Optional) Maximum rate of HSPA+ ADD TRMMAP(Optional) SRB primary path. Transmission Resource ADD LOADEQ(Optional) Signal bearing pri Transmission Resource ADD TRMMAP(Optional) SRB secondary pat Transmission Resource ADD LOADEQ(Optional) Signal primary seco Transmission Resource ADD TRMFACTOR(Optional) SRB service uplink Iub Overbooking ADD TSCROSS(Mandatory) Source end of times None

This parameter indi None SET CLKMODE(Mandatory) This parameter spec None

ADD FLOW(Mandatory) The source IP addr None

power to the maximum TX power.If the load of a cell is equal to or lower than this threshold, the load level of this cell is light. If the load level of a cell is light, the PUC algorithm will configure selection/reselection parameters for this cell to lead the

- HSDPA: Uplink is preferably carried on DCH, valid in the RRC connection setup

ADD CLKSRC(Mandatory) RMV CLKSRC(Mandatory)

This parameter spe None ADD CLKSRC(Mandatory) This parameter indi None ADD TSCROSS(Mandatory) Source timeslot No None ADD SAALLNK(Optional) Timer REPEAT_SREC. None LOD PATCH(Optional) This parameter ind None RMV FRALNK(Mandatory) This parameter ind None RMV IMAGRP(Mandatory) This parameter ind None RMV UNILNK(Mandatory) This parameter spe None RMV IMALNK(Mandatory) Number of the sub None UIN BRD(Mandatory) This parameter ind None RMV PPPLNK(Mandatory) This parameter ind None

RMV MPGRP(Mandatory) None RMV MPLNK(Mandatory) This parameter spe None


Number of the subrackValue range: 0 to 5Content: This parameter indicates the number of the subrack that this command applies to.Recommended value (default value): none

This parameter ind Transmission Resourc SET SCUPORT(Mandatory) This parameter ind None STR IPLOPTST(Mandatory) This parameter ind None ACT FAN(Mandatory) This parameter ind None RMV ETHMD(Mandatory) This parameter ind None PING MAC(Mandatory) This parameter ind None TRC MAC(Mandatory) This parameter ind None RMV ETHTRK(Mandatory) This parameter ind None RMV ETHTRKLNK(Mandatory) This parameter spe None RMV ETHTRKIP(Mandatory) This parameter ind None SET BFDPROTOSW(Mandatory) This parameter spe None STR IPCHK(Mandatory) This parameter ind None STR NODEBBWRPT(Mandatory) This parameter spe None ADD IPLOGICPORT(Mandatory) This parameter ind Transmission Resource RMV IPLOGICPORT(Mandatory) This parameter ind None ADD ATMLOGICPORT(Mandatory) This parameter ind Transmission Resource ADD FLOW(Mandatory) This parameter ind None MOD EMU(Mandatory) This parameter spe None SET ALMPORT(Mandatory) This parameter spe None CLR EMUALM(Mandatory) This parameter ind None

SET E1T1LOP(Mandatory) LOP E1T1(Mandatory) STR E1T1TST(Mandatory) SET OPTLOP(Mandatory) RST MPLNK(Mandatory) ULD RSTINFO(Mandatory) PING IP(Mandatory) TRC IPADDR(Mandatory) RST PPPLNK(Mandatory) SWP ETHPORT(Mandatory) ADD SUBRACK(Mandatory) ADD BRD(Mandatory) SET QUEUEMAP(Mandatory) SET CLK(Mandatory) SET E1T1(Mandatory) SET MSP(Mandatory) ACT MSP(Mandatory) ADD FRALNK(Mandatory) ADD TSCROSS(Mandatory) ADD IMAGRP(Mandatory) ADD UNILNK(Mandatory) ADD IMALNK(Mandatory) INH BRD(Mandatory) ADD DEVIP(Mandatory) ADD IPRT(Mandatory) ACT VCLCC(Mandatory) SET OPT(Mandatory) SET COPTLNK(Mandatory) ACT ETHPORT(Mandatory) SET ETHPORT(Mandatory) ADD ETHREDPORT(Mandatory) ADD PPPLNK(Mandatory) ADD MPGRP(Mandatory) ADD MPLNK(Mandatory) ADD VLANID(Mandatory)

SET PHBMAP(Mandatory) No. of the WRBS None ADD MTP3LNK(Mandatory) Number of the subr None

RBS managing the LCS SET MRSCOPECTRL(Mandatory) No. of the RBS. None FMT DATA(Optional) Subrack No. None

Subrack No. None

The No. of subrack None ADD SUBRACK(Mandatory) This parameter spe None SET QOSACT(Optional) When the parameter DCCC SET SRNSR(Optional) SRNS relocation-all SRNS Relocation SET SRNSR(Optional) SRNS Relocation SET SRNSR(Optional) SRNS relocation exp SRNS Relocation SET SRNSR(Optional) Time interval betw SRNS Relocation SET SRNSR(Optional) If SRNSR_DSCR_SEPR SRNS Relocation

ADD CBSADDR(Mandatory) SET NCELLDETECTSWITCH(Mandatory) ADD IURCOMMSCCP(Mandatory)

ACT CRC(Optional) COL FAMLOG(Mandatory) CMP TBLDATA(Mandatory)

SET ONLINE(Optional) SET OFFLINE(Optional)

the most common services over the

SET CORRMALGOSWITCH(Optional) SRNS Relocation SET SRNSR(Optional) Relocation trigger SRNS Relocation RST IUR(Mandatory) UE SRNTI. None SET CLK(Mandatory) This parameter spec None ADD SSCH(Optional) Offset of the SSCH Power Control SET CPUTHD(Optional) This parameter spec None SET CPUTHD(Optional) This parameter spe None

ADD TYPRABBASIC(Mandatory) None

reestablishment and updates the routing area once immediately.2) SRNSR_DSCR_LOC_SEPRAT_SWITCH: When the switch is selected, the RNC initiates static relocation or DSCR if the optimal cell and the intra-frequency neighboring cell of the optimal cell are not on the SRNC (the SRNC and the CRNC are separated). Based on DSCRInd of ADD NRNC, the RNC decides whether to initiate relocation or DSCR. 3) SRNSR_DSCR_PROPG_DELAY_SWITCH: When the switch is selected, the RNC initiates static relocation or

This parameter specifies the type of source.- SPEECH: speech service- UNKNOWN: non-speech service

SET CPUTHD(Optional) This parameter spec None

SET CPUTHD(Optional) This parameter spe None ADD CELLHCS(Optional) Intra-system HCS ce UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Threshold for inter UE Behaviors in Idle M ADD RNCCBCPUID(Mandatory) No. of the subsyste CBS STR CPUUSAGETST(Mandatory) Number of the sub None

ULD RSTINFO(Mandatory) Number of the sub None ADD NODEB(Optional) Subsystem of the None SET MRSCOPECTRL(Mandatory) No. of the RSPUb s None

SPU/MPU subsyst None SET TZ(Mandatory) Start time of the None ADD ATMTRF(Mandatory) This parameter ind None ADD TYPRABQUALITYMEAS(Mandatory) When a DCH is set DCCC ADD CELLGPSFRMTIMING(Optional) When the paramete LCS ADD CELLDYNSHUTDOWN(Mandatory) Start time of the f None ADD CELLDYNSHUTDOWN(Mandatory) Start time of the s None ADD CELLDYNSHUTDOWN(Mandatory) Start time of the t None SET IUTIMERANDNUM(Optional) CN protection time None ADD NRNC(Optional) Protection timer u None ADD SAALLNK(Optional) Maximum length of None ADD N7DPC(Optional) Indicating whether None STR CPUUSAGETST(Mandatory) Mode of stopping t None SET USERMBR(Optional) This parameter spe Transmission Resource ADD CELLEFACH(Optional) Guaranteed rate o HSPA+ SET FRC(Optional) This parameter spe HSUPA ADD CELLEFACH(Optional) Maximum rate of t HSPA+ SET USERMBR(Optional) This parameter spe Transmission Resource



ACT CRC(Optional) CMP TBLDATA(Mandatory)

ADD SCCPCHBASIC(Optional) ADD AICH(Optional) ADD PICH(Optional) ADD CELLMBMSSCCPCH(Optional) SET MBMSSCCPCH(Optional)


This parameter spe None ADD IPPATH(Optional) Max subframe leng IP RAN SET SUBNET(Mandatory) RNC internal subn None ADD QUICKCELLSETUP(Optional) Indicating whether None ADD NODEBLMTPARA(Optional) This parameter spe None ADD NRNCCELL(Optional) This parameter ind Channel Description

ADD NODEBLMTPARA(Optional) None ADD NRNC(Optional) Indicating whethe SRNS Relocation, Cell ADD CNNODE(Optional) CR supported by C None ADD GSMCELL(Optional) Identifying whethe Inter-RAT Handover ADD NODEBLMTPARA(Optional) This parameter spe None ADD GSMCELL(Optional) Identifying whethe Inter-RAT Handover SET ALMPORT(Optional) This parameter spec None SET TZ(Mandatory) Start day of the D None

Port switch None ADD CNNODE(Optional) Whether to support None

ADD TYPRABOLPC(Mandatory) ADD TYPRABRLC(Mandatory)

This parameter specifies whether the NodeB supports setting of DPC MODE to TRIPLET.- If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always SINGLE.

SET SCUPORT(Mandatory) SET BFDPROTOSW(Mandatory)

ADD SCTPLNK(Optional) This field indicate None ADD SCTPLNK(Optional) This field indicat None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET SS7PATCHSWITCH(Optional) Set patch switch p None SET TZ(Mandatory) Start week of the None SET CALLSHOCKCTRL(Optional) When call shock s None SET SYS(Optional) Contact mode of t None SET SYS(Optional) Description of the None SET CALLSHOCKCTRL(Optional) When call shock st None SET STATETIMER(Optional) A timer to RNC wa Inter-RAT Handover SET SYS(Optional) Location of the RN None SET SYS(Optional) ID of the RNC pro None SET CALLSHOCKCTRL(Optional) When call shock st None SET SYS(Optional) Services provided None SET CALLSHOCKCTRL(Optional) When the RRC REQ t None SET MTP3TMR(Optional) Signalling route se None SET MTP3TMR(Optional) Uninhibit acknowle None SET MTP3TMR(Optional) Force uninhibit ti None SET MTP3TMR(Optional) Inhibition acknowl None SET MTP3TMR(Optional) Link realignment tim None SET MTP3TMR(Optional) Time-control change None SET MTP3TMR(Optional) Local inhibit test t None SET MTP3TMR(Optional) Remote inhibit test None SET MTP3TMR(Optional) Changeover acknowl None SET IDLEMODETIMER(Optional) T300 is started UE Behaviors in Idle M SET CONNMODETIMER(Optional) T302 is started a URA Update, Cell Upda SET CONNMODETIMER(Optional) T304 is started a None SET CONNMODETIMER(Optional) T305 is started a URA Update, Cell Upda SET CONNMODETIMER(Optional) T307 is started aft URA Update, Cell Upda SET CONNMODETIMER(Optional) T308 is started a None SET CONNMODETIMER(Optional) T309 is started af Inter-RAT Handover

T312 is started aft UE Behaviors in Idle M SET CONNMODETIMER(Optional) T313 is started af Cell Update SET CONNMODETIMER(Optional) Cell Update SET CONNMODETIMER(Optional) Cell Update SET CONNMODETIMER(Optional) T316 is started af URA Update, Cell Upda ADD CNDOMAIN(Optional) Periodical locatio UE Behaviors in Idle M

SET CONNMODETIMER(Optional) SET IDLEMODETIMER(Optional)

be successfully reconfigured by CELL UPDATE If the RL cannot be successfully

SET CONNMODETIMER(Optional) T381 is started Cell Update SET MTP3TMR(Optional) Time-control chang None SET MTP3TMR(Optional) Changeover acknowl None SET MTP3TMR(Optional) Changeover acknowl None SET MTP3TMR(Optional) Transmission prohi None SET RACHMEASUREPARA(Optional) This parameter spe Power Control



is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-frequency measure report mode] is set to PERIODICAL_REPORTING, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors:The cell signal quality of the target frequency is better and can meet the coverage



is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-frequency measure report mode] is set to PERIODICAL_REPORTING, this parameter is used to evaluate inter-frequency handovers at the RNC.To set this parameter, you need to consider the following factors:The cell signal quality of the target frequency is better and can meet the coverage requirements of



is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-frequency measure report mode] is set to PERIODICAL_REPORTING, this parameter is used to evaluate inter-frequency handovers at the RNC. To set this parameter, you need to consider the following factors:The cell signal quality of the target frequency is better and can meet the coverage



is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-frequency measure report mode] is set to PERIODICAL_REPORTING, this parameter is used to evaluate inter-frequency handovers at the RNC.To set this parameter, you need to consider the following factors:The cell signal quality of the target frequency is better and can meet the coverage requirements of



R, this parameter is used to set the measurement control of event 2B. One of the necessary conditions for triggering event 2B can be met only when the quality of the target frequency is higher than this threshold. If the value of [Inter-frequency measure report mode] is set to PERIODICAL_REPORTING, this parameter is used to evaluate inter-frequency handovers at the RNC.To set this parameter, you need to consider the following factors:The cell signal quality of the target frequency is better and can meet the coverage

Inter-RAT Handover


as Tother_RAT in the following formulas. The inter-RAT handover decision thresholds are the absolute thresholds (RSSI) of inter-RAT cell quality for the inter-RAT handover decision.If the quality of another RAT in the inter-RAT measurement report meets the following condition:Mother_RAT + CIO >= Tother_RAT + H/2 the system starts the trigger timer and implements the handover decision after timeout. If the quality of the preceding RAT meets the following condition before timeout:

Inter-RAT Handover EXP DEVFILE(Optional) None SET HSSCCHLESSOPPARA(Optional) This parameter spe Radio Bearers

This parameter def None


handover, namely as Tother_RAT in the following formulas. The inter-RAT handover decision thresholds are the absolute thresholds (RSSI) of inter-RAT cell quality for the inter-RAT handover decision.If the quality of another RAT in the inter-RAT measurement report meets the following condition:Mother_RAT + CIO >= Tother_RAT + H/2 the system starts the trigger timer and implements the handover decision after timeout. If the quality of the preceding RAT meets the following condition before - Segment six: Version description

ADD FACHDYNTFS(Optional) ADD PCHDYNTFS(Optional) ADD RACHDYNTFS(Optional)

This parameter def None ADD FACHDYNTFS(Optional) This parameter def None

SET HSSCCHLESSOPPARA(Optional) Radio Bearers


ADD FACHDYNTFS(Optional) ADD PCHDYNTFS(Optional) ADD RACHDYNTFS(Optional)

329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56


SET HSSCCHLESSOPPARA(Optional) Radio Bearers ADD MTP3LNK(Optional) Used for the MTP3-B None

Difference between None HO CELL(Optional) Uniquely identifyin None ADD MTP3LNK(Optional) Length of the test None ADD CELLHCS(Optional) Maximum duration o UE Behaviors in Idle M ADD CELLHCS(Optional) Time before revert UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Hysterisis time be UE Behaviors in Idle M ADD CELLSELRESEL(Optional) Maximum duration o UE Behaviors in Idle M


329~17 341~18 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56 821~57 836~58 353~19 365~20 377~21 389~22 401~23 413~24 425~25 437~26 449~27 461~28 473~29 485~30 497~31 509~32 521~33 533~34 545~35 557~36 569~37 581~38 593~39 605~40 616~41 627~42 639~43 650~44 662~45 674~46 686~47 699~48 711~49 724~50 737~51 751~52 764~53 778~54 792~55 806~56

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory)


for the RNC to decide whether the UE is in low-mobility state. The smaller the value is, the more frequently the state estimation is

MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None



This parameter is AMRC, AMRC-WB



value of the parameter, the lower the probability of selecting

ADD INTRAFREQNCELL(Optional) ADD INTERFREQNCELL(Optional)

Offset of cell CPICH Ec/No measurement value in cell selection or reselection.The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value the parameter, the higher the probability of doing so.




DL basic common me Load Control, Iub Satell


This parameter spe Load Control, Iub Satell

HSDPA power requir Load Control, Iub Satell SET LDM(Mandatory) This parameter spe Load Control








This parameter is v Inter-Frequency Handov

Inter-Frequency Handov ADD SCCPCHBASIC(Mandatory) None

This parameter def None SWP BAMAREA(Mandatory) Select the target None ADD TYPRABQUALITYMEAS(Mandatory) When a DCH is set DCCC ADD TYPRABQUALITYMEAS(Mandatory) If DL code TX powe DCCC, AMRC, AMRC


Value range: 1~6000Physical value range: 10 to 60000, step: 10Physical unit: msContent: UL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Recommended value: 20




whether the UE is in high-mobility state.The start point of the estimation is the moment of the last reporting of event 1D, and the backdated time length is determined by this parameter. If the parameter is set to 0, the RNC does not decide whether the UE is is unavailable. For detailed

ADD FACHDYNTFS(Mandatory) ADD PCHDYNTFS(Mandatory) ADD RACHDYNTFS(Mandatory)

ADD TYPRABQUALITYMEAS(Mandatory) If DL code TX powe DCCC, AMRC, AMRC SET SCHEDULEPRIOMAP(Mandatory) This parameter spec Iub Overbooking, HSD SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET IAVUSERTHPCLASS(Optional) This parameter spec None SET USERGBR(Mandatory) This parameter spec Iub Overbooking, HSD PING IP(Optional) This parameter spec None

This parameter spec None BLK CELL(Mandatory) Specifying the time None ADD AAL2PATH(Optional) Timer_CU timer. St Transmission Resource PING IP(Optional) This parameter spe None ADD CELLINTERFREQHOCOV(Optional) Inter-Frequency Handov SET INTERFREQHOCOV(Optional) Inter-Frequency Handov ADD TYPRABRLC(Optional) This parameter spec Radio Bearers

PING MAC(Optional) TRC MAC(Optional)

than the highest priority of the measure cells,start than the highest priority of the measure cells,



existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong handovers.

Inter-Frequency Handov ADD CELLINTERRATHOCOV(Optional) Inter-RAT Handover SET INTERRATHOCOV(Optional) Inter-RAT Handover ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover


Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong handovers. an inter-RAT handover is triggered. When an inter-RAT handover is triggered. When an inter-RAT handover is triggered. When



slower the response of the handover to the change of measured signals.Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate

ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov

decision, but the slower the response of the handover to the change of measured signals.Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate

Inter-RAT Handover


neighboring cell meets the preceding condition, the system starts the trigger timer. The system then implements the handover decision after timeout if the quality of the GSM neighboring cell always meets the preceding condition throughout the time length of the timer. The time length of the trigger timer is called the delay trigger time.The delay trigger time and hysteresis are used to prevent mis-decisions caused by signal jitters during inter-RAT handover decisions.Considering that the UE is on the edge of the

ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover ADD TYPRABDCCCMC(Optional) This parameter spe DCCC ADD TYPRABDCCCMC(Optional) This parameter spec DCCC

neighboring cell meets the preceding condition, the system starts the trigger timer. The system then implements the handover decision after timeout if the quality of the GSM neighboring cell always meets the preceding condition throughout the time length of the timer. The time length of the trigger timer is called the delay trigger time.The delay trigger time and hysteresis are used to prevent mis-decisions caused by signal jitters during inter-RAT handover decisions.Considering that the UE is on the edge of the

ADD TYPRABRLC(Optional) Radio Bearers ADD TYPRABRLC(Optional) This parameter spe Radio Bearers ADD TRMMAP(Mandatory) TRMMAP ID. Transmission Resource ADD ADJMAP(Mandatory) Index of the traffi RAN Sharing, Transmis ADD ADJMAP(Mandatory) Index of the traffi RAN Sharing, Transmis ADD ADJMAP(Mandatory) Index of the traffi RAN Sharing, Transmis SET MTP3TMR(Optional) Signalling link te None SET MTP3TMR(Optional) Signalling link rep None ADD NRNC(Mandatory) IUR trans bearer t IP RAN ADD CNNODE(Optional) The transfers beare IP RAN ADD NODEB(Optional) Transport type of t IP RAN SET TZ(Mandatory) Time offset from t None

A positive value r Channel Description

A positive value r Channel Description

This parameter specifies the number of consecutive periods during which the percentage of retransmitted PDUs is higher than the threshold of event A before event A is triggered.Recommended value (default value): 2.

ADD FACH(Mandatory) ADD PCH(Optional) ADD CELLMBMSFACH(Optional) SET MBMSFACH(Optional)

ADD FACH(Mandatory) ADD PCH(Optional) ADD CELLMBMSFACH(Optional) SET MBMSFACH(Optional)

ADD CELLDYNSHUTDOWN(Optional) The cell will shut None

COL FAMLOG(Mandatory) None

UE Behaviors in Idle M ADD TYPRABBASIC(Mandatory) This parameter spec HSDPA, HSUPA

Fam log type to be collected.Normal : Collect the fam text log in the \common\fam\famlog directory of the BAM install path. Format : Collect the fam format log in the \common\fam\famlogfmt directory of the BAM install path.


HCS cell reselection penalty timer.The larger the value of the parameter, the longer the HCS penalty time. The smaller the value of the parameter, the shorter the HCS penalty time.

This parameter spec Iub Overbooking, HSDP SET REDIRECTION(Mandatory) This parameter spec Load Control ADD CELLREDIRECTION(Mandatory) This parameter spec Load Control

ADD M3LKS(Optional) Traffic mode of M None ADD CELLOLC(Optional) Load Control ADD NODEB(Optional) This parameter spe IP RAN ADD IPPATH(Optional) The transport type Transmission Resource

Transport type. Transmission Resource

SET SCHEDULEPRIOMAP(Mandatory) SET USERGBR(Mandatory) SET FACHBANDWIDTH(Mandatory) SET USERHAPPYBR(Mandatory) SET DTXDRXPARA(Mandatory) SET HSSCCHLESSOPPARA(Mandatory)

parameter defines the maximum number of users

ADD TRMMAP(Mandatory) ADD ADJMAP(Mandatory) ADD ADJNODE(Mandatory)

Uniquely identifyi None ADD TYPRABHSPA(Mandatory) This parameter spec Radio Bearers ADD TYPRABOLPC(Mandatory) This parameter spe Radio Bearers ADD TYPRABRLC(Mandatory) This parameter spe Radio Bearers


ADD FACH(Mandatory) ADD FACHLOCH(Mandatory) ADD RACH(Optional) ADD PCHDYNTFS(Optional) ADD FACHDYNTFS(Mandatory) ADD PCH(Optional) ADD RACHDYNTFS(Optional) ADD BCH(Optional)


record is restored to the state when the 1st event 1D occurs during the latest [TRELATELENGTH]. The given time length is set

ADD CELLSELRESEL(Optional) UE Behaviors in Idle M ADD CELLSELRESEL(Optional) This parameter ind URA Update, Cell Updat ADD CELLSELRESEL(Optional) This parameter ind URA Update, Cell Updat

This parameter iden None

1. Ensure that the UE can reselect a cell when crossing the non-soft-switch area of the cell and that the UE timely performs location updates, cell updates, or URA updates when necessary.2. Ensure that the UE does not reselect a cell when it is in the soft-switch area of the cell. In this way, the unnecessary location updates, cell updates, and URA updates are avoided.3. Consider the difference between cells that cover different areas, for example the cells covering highways and cells covering densely populated areas. TIf the parameter is set to

ADD ATMTRF(Mandatory) RMV ATMTRF(Mandatory)

Intra-Frequency Hando

ADD CELLINTRAFREQHO(Optional) SET INTRAFREQHO(Optional) SET SMLC(Mandatory)

reduce ping-pong handovers or wrong handovers. Therefore, for the cell with most of the fast-moving UEs, this parameter can be set smaller, whereas for the cell with most of the slow-moving UEs, this parameter can be set larger.Different events require different values of the time-to-trigger parameter: the event (1A) of adding cells to the active set requires a comparatively short delay; the events of replacing cells in the active set (1C and 1D) require relatively fewer ping-pong and wrong handovers and have no big impact on the call drop rate, and



reduce ping-pong handovers or wrong handovers. Therefore, for the cell with most of the fast-moving UEs, this parameter can be set smaller, whereas for the cell with most of the slow-moving UEs, this parameter can be set larger.Different events require different values of the time-to-trigger parameter: the event (1A) of adding cells to the active set requires a comparatively short delay; the events of replacing cells in the active set (1C and 1D) require relatively fewer ping-pong and wrong handovers and have no big impact on the call drop rate, and



handovers or wrong handovers. Therefore, for the cell with most of the fast-moving UEs, this parameter can be set smaller, whereas for the cell with most of the slow-moving UEs, this parameter can be set larger.Different events require different values of the time-to-trigger parameter: the event (1A) of adding cells to the active set requires a comparatively short delay; the events of replacing cells in the active set (1C and 1D) require relatively fewer ping-pong and wrong handovers and have no big impact on the call drop rate, and



Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or

ADD CELLMBDRINTERFREQ(Optional) Inter-Frequency Handov

Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or

Inter-RAT Handover


Based on the existing emulation result, the hysteresis value is set to effectively reduce the average number of handovers and the number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong handovers.

Inter-RAT Handover


number of wrong handovers, thus preventing unnecessary handovers. In addition, from the emulation perspective, the UE at different rates may react differently to the hysteresis value for the event. For the fast-moving UE, the call drop rate is more sensitive to the hysteresis value, whereas for the slow-moving UE, the call drop rate is less sensitive to the hysteresis value. This can also reduce ping-pong handovers or wrong handovers. Thus, set the value smaller for cells where fast-moving UEs are dominant, whereas set the value bigger for cells where slow-moving UEs are

Inter-RAT Handover



ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover SET HOCOMM(Optional) To guarantee the po Intra-Frequency Handov SET HOCOMM(Optional) To guarantee the po Intra-Frequency Handov



ADD ETHTRKLNK(Mandatory) RMV ETHTRKLNK(Mandatory)


This parameter spe None ADD CELLSETUP(Optional) Radio Link Failure None HO CELL(Optional) Uniquely identify None ADD NODEBESN(Mandatory) This parameter sp None ADD NODEBESN(Mandatory) IP address of the None ADD NODEBESN(Mandatory) Mask of the subne None ADD IPLOGICPORT(Mandatory) This parameter ind Transmission Resource LOP E1T1(Mandatory) Number of the E1/T None SET E1T1(Optional) 16TimeSlot Switch. None

Bearing timeslot of None ADD TSCROSS(Optional) Timeslot cross con None STR SCHTSK(Optional) Name of the schedul None

ADD ETHTRKLNK(Mandatory) RMV ETHTRKLNK(Mandatory)

ADD ETHTRK(Mandatory) RMV ETHTRK(Mandatory) ADD ETHTRKIP(Mandatory) RMV ETHTRKIP(Mandatory) ADD ETHTRKLNK(Mandatory)

ADD PPPLNK(Mandatory) ADD FRALNK(Mandatory) ADD MPLNK(Mandatory)

Inter-Frequency Handov SET MGWTST(Mandatory) MGWTST user IMSI None STR IPLOPTST(Optional) This parameter indi None SET MGWTST(Mandatory) Indicating whethe None STR CPUUSAGETST(Mandatory) Duration of the CP None TRC MAC(Optional) This parameter spe None ADD ATMLOGICPORT(Mandatory) Forward bandwidth Transmission Resource ADD IPPATH(Mandatory) Forward bandwidth Transmission Resource ADD RSCGRP(Mandatory) This parameter is Transmission Resource

This parameter indi None PING IP(Optional) This parameter spec None STR IPLOPTST(Optional) This parameter ind None


Time window for deciding whether the UE is in low-mobility state.Every time the slow speed cycle timer times out, the RNC estimates whether the UE is in low-mobility state. The backdated time length is set by this parameter.

ADD CELLSETUP(Mandatory) ADD NRNCCELL(Mandatory)

TX traffic record Transmission Resource SET CTRLFACTOR(Mandatory) Upper-layer appli None

None

ADD IPOAPVC(Optional) ADD AAL2PATH(Mandatory) ADD SAALLNK(Mandatory) ADD VPCLCX(Mandatory)

ADD CELLSETUP(Mandatory) ADD QUICKCELLSETUP(Mandatory) ADD NRNCCELL(Optional)

[4357-4458]Additional frequencies: {1007, 1012, 1032,1037, 1062, 1087}

None

Indicating whether None SET AAL2TMR(Optional) This timer is star None ADD IPPATH(Optional) UDP MUX Max Le Transmission Resource ADD IPPATH(Optional) Receive UDP MUX Transmission Resource ADD IPPATH(Optional) Sender UDP MUX M Transmission Resource ADD IPPATH(Optional) UDP MUX Max Ti Transmission Resource SET SMLC(Optional) Switch for sending LCS SET SMLC(Optional) Switch for sending LCS SET STATETIMER(Optional) A timer used to wa Radio Bearers SET STATETIMER(Optional) A timer to RNC wai None UIN BRD(Mandatory) This parameter indi None STR E1T1TST(Optional) This parameter is None SET ALMPORT(Optional) This parameter spec None SET ADMCTRL(Optional) UL activity factor Load Control

ADD CELLSETUP(Optional) ADD QUICKCELLSETUP(Optional) ADD NRNCCELL(Optional)

General frequencies: [2712-2863]Additional frequencies: noneBand9:General frequencies: [8762-8912]Additional frequencies: noneBandIndNotUsed: [0-16383]Uplink UARFCN of a cell.Suppose the Uplink UARFCN is unspecified and the value of [Band indication] is Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8,or Band9. Then the default Uplink UARFCN is as follows: If the DL frequency belongs to common frequencies, thenBand1: Uplink UARFCN =


Duration when the AMRC, AMRC-WB




Duration when the AMRC, AMRC-WB SET ADMCTRL(Optional) UL activity factor Load Control


This parameter spec Radio Bearers SET FRC(Optional) UL BE traffic Initi Load Control, DCCC







larger the value of this parameter, the stronger the smoothing effect

SET FRCCHLTYPEPARA(Optional) ADD CELLFRC(Optional)

SET FRCCHLTYPEPARA(Optional) The rate decision Radio Bearers

Duration when the DCCC





Length of smoothi Load Control, Iub Satell ADD CELLCAC(Optional) Load Control







premeditated common channel

ADD CELLCAC(Optional) Admission threshold Load Control ADD NODEBLMTPARA(Optional) None



HIGHER_LAYER_SCHDL: higher layer scheduling



SET DCCC(Optional) For a BE service t DCCC ADD TYPRABBASIC(Mandatory) This parameter spe None

Maximum UL rate wh DCCC SET USERGBR(Optional) This parameter spe Load Control, DCCC

ADD CELLCAC(Optional) Uplink Credit Rese Load Control ADD CELLCAC(Optional) If the HS-DPCCH ca Load Control SET FRC(Optional) This parameter spe Radio Bearers SET ADMCTRL(Optional) UL activity factor Load Control ADD CELLLDR(Optional) Load Control ADD CELLLDR(Optional) The inter-frequency Load Control ADD CELLLDR(Optional) The mechanism of t Load Control



value of the parameter gives rise to the


Number of RABs sele Load Control

Reserved SF thresho Load Control ADD CELLLDR(Optional) This parameter has Load Control





Load Control


Number of RABs sel Load Control


service.CSINTERRATSHOULDNOTLDHO: The inter-RAT SHOULDBE load handover of the CS domain is performed.PSINTERRATSHOULDNOTLDHO: The inter-RAT SHOULDNOTBE load handover of the PS domain is performed.The LDR takes the actions in the preset sequence and judges whether each action is successful. If an action is unsuccessful, the LDR turns to the next action. If an action is successful, a parameter is set to NOACT, or all the preceding actions are taken, the downlink LDR is finished, and the



ADD CELLLDM(Optional) If the ratio of UL Load Control



This parameter has Load Control ADD CELLLDM(Optional) If the ratio of UL Load Control ADD NODEBLMTPARA(Optional) This parameter spe None




Smooth filtering co DCCC, AMRC, AMRC SET DCCC(Optional) This parameter det DCCC

SET DCCC(Mandatory) Threshold of the U DCCC

To adjust the UL A AMRC,AMRC-WB SET ADMCTRL(Optional) UL activity factor Load Control



ADD CELLCAC(Optional) The percentage of Load Control

ADD CELLCAC(Optional) Load Control

UL load of a cell is higher than this threshold after the access, this service will be rejected. If the UL load of a cell will not be higher than this threshold, this service will be admitted. The UL load factor thresholds include parameters of [UL threshold of Conv non_AMR service], [UL handover access threshold] and [UL threshold of other services]. The four parameters can be used to limit the proportion between the non-handover service, handover user and other services in a specific cell, and to guarantee the access priority of the handover

ADD CELLCAC(Optional) The percentage of Load Control ADD CELLCAC(Optional) The percentage of Load Control

Length of smoothi Load Control, Iub Satell SET LDM(Optional) SET SATLDM(Optional)


the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink OLC fast restriction.Selection of RABs of the OLC is based on the service priorities and ARP values and bearing priority indication. The RAB of low priority is under control. In the actual system, UlOlcFTFRstrctRabNum and DlOlcFTFRstrctRabNum can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set UlOlcFTFRstrctRabNum and DlOlcFTFRstrctR


L3 filtering coeffi Load Control, Iub Satell

ADD CELLLDM(Optional) If the ratio of UL Load Control ADD CELLOLC(Optional) Load Control

UL OLC trigger hys Load Control, Iub Satell

selected based on the action rules to perform this action. This parameter defines the maximum number of uplink OLC fast TF restriction performed in entering/exiting the OLC status.After the overload is triggered, the RNC immediately executes OLC by first executing fast TF restriction. The internal counter is incremented by 1 with each execution. If the number of overloads does not exceed the OLC action threshold, the system lowers the BE service rate by lowering TF to relieve the overload. If the number of overloads exceeds the OLC action


executing uplink OLC service


ADD CELLLDM(Optional) If the ratio of UL Load Control


Number of users se Load Control SET QOSACT(Optional) Rate adjustment sw AMRC SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Hando SET QOSACT(Optional) Inter-RAT handover Inter-RAT Handover,

Inter-Frequency Handov SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Handov SET QOSACT(Optional) Rate adjustment sw AMRC-WB SET QOSACT(Optional) Inter-frequency ha Inter-Frequency Hand SET QOSACT(Optional) Inter-RAT handove Inter-RAT Handover, SET DCCC(Optional) This parameter det DCCC SET DCCC(Optional) This parameter det DCCC

Inter-Frequency Handov SET ADMCTRL(Optional) UL activity factor Load Control SET FRC(Optional) This parameter spe Radio Bearers SET ADMCTRL(Optional) UL activity factor Load Control SET FRCCHLTYPEPARA(Optional) This parameter spe Radio Bearers SET FRC(Optional) This parameter spe Radio Bearers ADD TYPRABQUALITYMEAS(Mandatory) DCCC, AMRC, AMRC




For the inter-frequency or inter-RAT measurement based on coverage, the compressed mode can be stopped through reporting


system resources and therefore this approach is recommended only for low-rate users. The high-layer scheduling requires variable

higher than the absolute threshold

ADD TYPRABQUALITYMEAS(Mandatory) Measurement report DCCC, AMRC, AMRC

ADD TYPRABQUALITYMEAS(Mandatory) Measurement report DCCC, AMRC, AMRC ADD TYPRABQUALITYMEAS(Mandatory) Measurement report DCCC, AMRC, AMRC ADD CELLCAC(Optional) When the algorithm Load Control SET FRC(Optional) This parameter spe Power Control

Duration when the Inter-Frequency Handov









Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates.This is controlled by MTRLGY and valid when MET~0(metric system).

This parameter specifies the estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates.This is controlled by MTRLGY and valid when IMP~1(British measurement).

Length of the semi-major axis of an uncertain area in the cell center.This is controlled by MTRLGY and valid when MET~0(metric system).




This parameter specifies the length of the semi-major axis of an uncertain area in the cell center.This is controlled by MTRLGY and valid when IMP~1(British measurement).

Length of the semi-minor axis of an uncertain area in the cell center.This is controlled by MTRLGY and valid when MET~0(metric system).

This parameter specifies the length of the semi-minor axis of an uncertain area in the cell center.This is controlled by MTRLGY and valid when IMP~1(British measurement).

Number of the UNI None SET RNCMBMSPARA(Optional) This parameter spe MBMS Service ADD ADJNODE(Mandatory) ID of the upper IP RAN ADD RSCGRP(Mandatory) Number of the uppe Transmission Resource ADD ATMLOGICPORT(Optional) Type of the logical Transmission Resource ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None ADD QUICKCELLSETUP(Mandatory) A cell can belongs None

ID of the URA in a URA Update ADD QUICKCELLSETUP(Mandatory) Number of UTRAN R None


ADD UNILNK(Mandatory) RMV UNILNK(Mandatory)

ADD URA(Mandatory) ADD CELLURA(Mandatory) ADD NRNCURA(Mandatory)


necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors:The cell signal quality of the used frequency is better and can meet the

Inter-RAT Handover



configure that the inter-RAT measurement quantity are delivered according to event 2D that triggers the measurement, which causes the result that the Qos-based inter-RAT measurement cannot refer to the coverage-based configurations. Under this condition, it is necessary for the Qos-based inter-RAT measurement to set the used frequency separately. When both the Qos-based and the coverage-based inter-RAT measurements exist, refer to this parameter.As for the impact on network performance:When the UE moves to the cell


2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors:The cell signal quality of the used frequency is better

Inter-Frequency Handov ADD NODEBESN(Mandatory) This parameter spe None SET HSSCCHLESSOPPARA(Mandatory) This parameter spec Radio Bearers ADD NODEBESN(Mandatory) This parameter spe None ADD NODEBESN(Optional) Whether to use the None

Indicating whether HCS Handover, UE Beha ADD NODEBESN(Mandatory) This parameter spe None ADD CELLMBDRINTERRAT(Optional) Inter-RAT Handover SET USERPLNSHAREPARA(Optional) Percentage of User None SET USERPLNSHAREPARA(Optional) Percentage of User None


2B. One of the necessary conditions can be met only when the quality of the used frequency is lower than this threshold (Event 2B can be triggered only when both conditions are met.) To set this parameter, you need to consider the following factors:The cell signal quality of the used frequency is better


RNC to perform inter-RAT

This parameter spec Iub Overbooking, HSD ADD NODEBESN(Mandatory) This parameter sp None ADD ATMTRF(Optional) This parameter ind None ADD AAL2PATH(Mandatory) VCI of the PVC fr Transmission Resource ACT VCLCC(Mandatory) This parameter ind None

VLAN ID flag. IP RAN

SET SCHEDULEPRIOMAP(Mandatory) SET USERGBR(Mandatory) SET FACHBANDWIDTH(Mandatory) SET USERHAPPYBR(Mandatory)

ADD SCTPLNK(Optional) ADD IPPATH(Optional)

Vlan id to the dest IP RAN SET DSCPMAP(Optional) VLAN priority. None ADD TRMFACTOR(Optional) AMR voice service Iub Overbooking ADD TRMMAP(Optional) AMR voice primary Transmission Resource ADD LOADEQ(Optional) AMR voice primary Transmission Resource ADD TRMMAP(Optional) AMR voice seconda Transmission Resource ADD LOADEQ(Optional) AMR voice primary Transmission Resource ADD TRMFACTOR(Optional) AMR voice service Iub Overbooking SET FRCCHLTYPEPARA(Optional) Radio Bearers, HSDPA SET FRC(Optional) This parameter dec HSUPA MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None MOD EMU(Optional) This parameter spe None

This parameter spec None ADD AAL2PATH(Mandatory) VPI of the PVC fr Transmission Resource ADD NRNCCELL(Optional) VP service limited Intra-Frequency Handov

This parameter indi None SET QOSACT(Optional) When the parameter Inter-Frequency Handov SET KPIALMTHD(Optional) VP drop ratio Per S None SET KPIALMTHD(Optional) The number of VP R None SET KPIALMTHD(Optional) VP Rab successful s None

ADD VLANID(Mandatory) ADD IPPATH(Mandatory) ADD SCTPLNK(Mandatory) ADD ETHMA(Mandatory)

- HSDPA: Uplink is preferably carried on DCH,

ADD VPCLCX(Optional) RMV VPCLCX(Mandatory)

ADD QUICKCELLSETUP(Optional) ADD CELLSETUP(Optional)

SET KPIALMTHD(Optional) The number of VP r None SET QOSACT(Optional) Timer for triggeri AMRC-WB MOD EMU(Optional) This parameter spec None



cell of the active set. For the definition, refer to 3GPP TS 25.331.When the parameter equals 0, the general quality of the active set is the measurement of the best cell and the SHO relative threshold depends on only the best cell in the active set. When the parameter equals 1, it can be regarded as the equivalent signal strength when maximum ratio combination of down links of all cells in the active set is implemented.As for the impact on network performance:The larger the value of the parameter is, the higher thresholds for triggering


ADD SAALLNK(Optional) Size of the sliding None

ADD M3LKS(Optional) Work mode of M3U None FMT DATA(Optional) The flag of the wor None SET E1T1(Optional) Work Mode.The valu None SET MSP(Optional) This parameter indi None SET RNCMBMSPARA(Optional) This parameter spe MBMS Service SET COIFTIMER(Optional) For the PS BE servi DCCC SET TZ(Optional) Present the Time z None


details about this parameter, refer to the subsection of frequency quality estimation in the section of inter-frequency measurement in 3GPP TS 25.331. This parameter is used for all event-triggered inter-frequency measurements, including those triggered by events 2D, 2F, 2B and 2C. The parameter, however, is not used for periodical inter-frequency measurements. The larger the value of this parameter, the higher the estimated quality of the current frequency in the same condition, and the more difficult to trigger inter-frequency handover. The

Value Type GUI Value Range Actual Value Range Unit Default Value Enumeration Ty R99, HSPA, SHARE R99,HSPA,SHARE None - Compound Typ hour, min, sec 00:00:00~23:59:59 s - Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Interval Type 0~7 0~7 None 0 Enumeration Ty ASC0, ASC1, ASC2, A ASC0, ASC1, ASC2, ASC None -

Enumeration Ty Disable, Enable Disable (not support the a None

Enable

Interval Type 1~36000 10~360000, step:10 ms - Interval Type 1~36000 1~36000 None - Bit Field Type AC0, AC1, AC2, AC3, AC0,AC1,AC2,AC3,AC4 None -

Interval Type 6~3600 6~3600 None-

Interval Type 1~10 0.1~1, step:0.1 per cent - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty LOCAL(Local File), SH LOCAL,SHARE None - Enumeration Ty GPS(Global Position Sy GPS(Global Position Sys None - Interval Type 1~95 1 to 95 per cent - Enumeration Ty NOPRIORITY(NOPRIOR NOPRIORITY, GOLD, S None - Enumeration Ty INACTIVE, ACTIVE INACTIVE, ACTIVE None ACTIVE Enumeration Ty NODELIVERY, DELIV NODELIVERY, DELIVE None - Enumeration Ty UE_BASED, UE_ASSI UE_BASED, UE_ASSIS None -

Interval Type 0~65534 0 to 65534 None-

Enumeration Ty RNC(Local RNC), NO RNC(Local RNC), NODE None - Interval Type -22~5 -22~5 dB -6 Interval Type 0~1 0~1 None 1

Interval Type 1~32000 1~32000 None

-

Enumeration Ty BIT_ALIGN(Bit aligne BIT_ALIGN, OCTET_A None - Interval Type 0~4000000 0~4000000 kbit/s - Enumeration Ty Manual(Manual), Autom Manual, Automatic None Automatic Interval Type -1000~10000 -1000 to 10000 m - Interval Type -3281~32810 -3281~32810 None - Enumeration Ty Critical(Critical), Maj Critical,Major,Minor,War None -

Interval Type 0~63 0~62, 63: Infinity None



Interval Type 0~63 0~62, 63: Infinity None Enumeration Ty SENDER_PARA, REC SENDER_PARA, RECE None - Enumeration Ty NO, YES NO, YES None - Interval Type 0~100 0~100 None - Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None - Interval Type 0~65534 0~65534 None - Interval Type 20~64000 20~64000 ms - Interval Type 0~1999 0 to 1999 None - Interval Type 0~1999 0 to 1999 None - Interval Type 0~1999 0 to 1999 None -

4(ADD CELLINTERFREQHOCOV) -(SET INTERFREQHOCOV)

1(ADD CELLINTERFREQHONCOV) -(SET INTERFREQHONCOV)

4(ADD CELLINTERRATHOCOV) -(SET INTERRATHOCOV)

1(ADD CELLINTERRATHONCOV) -(SET INTERRATHONCOV)


-

Interval Type -32767~32767 -32767~32767 m - Interval Type -107502~107502 -107502~107502 m - Interval Type -90000000~90000000 -90~90, step: 0.000001 degree - String Type - -90~90 second - Interval Type -180000000~180000000 -180~180, step: 0.000001 degree - String Type - -180~180 second - Interval Type 0~3600 0~360, step: 0.1 degree - Interval Type 0~3600 0~360, step: 0.1 degree - Enumeration Ty TRUE, FALSE FALSE,TRUE None FALSE Enumeration Ty NBAP, M3UA NBAP, M3UA None - Enumeration Ty APPLIED_ON_UPLIN APPLIED_ON_UPLINK None - Enumeration Ty PRIMARY(Primary), S PRIMARY, STANDBY, None Primary Enumeration Ty PRIMARY(Active Area) PRIMARY,STANDBY,A None ALL Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None -

Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None -

Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Enumeration Ty Gold, Silver, Copper Gold,Silver,Copper None - Interval Type 3~10 3 to 10 None 3 Interval Type 3~10 300 to 1000 ms 3 Interval Type 0~255 0 to 255 None - Interval Type 14~27 14 to 27 None - Interval Type 0~5 0 to 5 None - Enumeration Ty NOT_ALLOWED, AL NOT_ALLOWED,ALLO None ALLOWED

Enumeration Ty SERVER, CLIENT SERVER(sever mode), CL None

-

String Type - 0 to 63 character None

-

String Type - 0 to 15 character None

-

Enumeration Ty NO_V, PAP_V, CHAP_ NO_V(not verify), PAP_ None

NO_V

Enumeration Ty ENABLE, DISABLE ENABLE, DISABLE None - Interval Type 0~15 0~15 None 7 Interval Type 0~15 0~15 None 0 Interval Type 0~15 0~15 None 15 Interval Type 0~65535 0~65535000 step:1000 None - Enumeration Ty LOW(Low), HIGH(High LOW,HIGH None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty OFF, ON OFF, ON None - Interval Type 0~621 -112~-50,step:0.1 dBm 61 String Type - 0 to 128 characters None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None -

Enumeration Ty Band1, Band2, Band3, Band1, Band2, Band3, Ba None Interval Type 1~1000 1~1000 kbit/s - Interval Type 0~7 0~7 None - Interval Type 0~1023 0~1023 None - Interval Type -350~150 -35~15,step:0.1 dB 0 Interval Type -350~150 -35~15,step:0.1 dB -30 Interval Type -350~150 -35~15, step: 0.1 dB -20 Enumeration Ty MTP3, M3UA MTP3, M3UA None -

-(ADD NRNCCELL,ADD QUICKCELLSETUP,ADD CELLSETUP) GSM900_DCS1800_BAND_USED(ADD GSMCELL)

Enumeration Ty R99, HSPA R99, HSPA None - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Interval Type 1~65535 1~65535 s -

Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms -


Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms -


Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms -

Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms -

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 256, 5 byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s - Interval Type 0~1024 0~1024 s -

Interval Type 0~100 0~10, step: 0.1 dB Enumeration Ty NO, YES NO, YES None - Interval Type 1~15 1~15 None - Interval Type 1~15 1~15 None - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Enumeration Ty None, RateDegrade, Int None, RateDegrade, Inte None - Enumeration Ty SINGLE, COMBINE SINGLE, COMBINE None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Interval Type 20~64000 20~64000 ms - Interval Type 3~10 3 to 10 None 3 Interval Type 1~1000 1~1000 kbit/s 32 Interval Type 1~2000 1~2000 kbit/s 512

Interval Type 1~400 0.1~40, step:0.1 dB 100 Interval Type 1~6000 1~6000 s 120

Compound Typ hour, min, sec hour{0~23}, min{0~59}, None - Interval Type 0~10 0~10 None 0

10(ADD CELLDCCC) -(SET DCCC)

Compound Typ hour, min, sec hour{0~23}, min{0~59}, None - Enumeration Ty OFF, ON OFF, ON None ON

Interval Type 1~100 0.1~10, step:0.1 dBm 5 Interval Type -63~0 5*10^(-7)~1 None -

Enumeration Ty FALSE, TRUE FALSE,TRUE NoneFALSE

Enumeration Ty D1, D2, D4, D8 1,2,4,8 None - Enumeration Ty D250, D500 250,500 ms - Interval Type 0~30 0~30 None - Interval Type -115~-25 -115~-25 dBm -92

Interval Type -115~-25 -115~-25 dBm Interval Type 2000~60000 2000~60000 ms - Enumeration Ty nonrpt(Not Report), rpt( nonrpt,rpt None - Enumeration Ty INT, DPU, XPU INT,DPU,XPU None - Enumeration Ty PEUa, AEUa, FG2a, GO PEUa,AEUa,FG2a,GOUa None - Enumeration Ty FG2a, GOUa FG2a, GOUa None - Enumeration Ty PEUa, POUa, UOIa PEUa, POUa, UOIa None - Enumeration Ty PEUa, POUa PEUa,POUa None -

-115(ADD CELLINTRAFREQHO) -(SET INTRAFREQHO)

Enumeration Ty REQUIRED(Verify mod REQUIRED, NOT_REQU None Enumeration Ty REQUIRED(Verify mod REQUIRED,NOT_REQU None REQUIRED Enumeration Ty AEUa, PEUa, AOUa, P AEUa,AOUa,PEUa,POUa None - Enumeration Ty AEUa, PEUa, AOUa, P AEUa, PEUa, AOUa, PO None - Enumeration Ty PEUa(PEUa), AEUa(AE AEUa, PEUa, AOUa, PO None - Enumeration Ty SCUa, GCUa, GCGa, SP SCUa, GCUa, GCGa, SPU None - Enumeration Ty AEUa, PEUa, AOUa, P AEUa, PEUa, AOUa, POU None - Enumeration Ty AEUa, PEUa, AOUa, P AEUa, PEUa, AOUa, PO None - Enumeration Ty SCUa, GCUa/GCGa, S SCUa, GCUa/GCGa, SPU None - Enumeration Ty AEUa, AOUa AEUa, AOUa None - Enumeration Ty AOUa, POUa, UOIa AOUa, POUa, UOIa None - Enumeration Ty AEUa, AOUa, UOIa AEUa, AOUa, UOIa None - Enumeration Ty OFF, ON OFF, ON None OFF

Interval Type 0~1000000 0 to 1000000 kbit/s

0

REQUIRED(ADD CELLINTERRATHOCOV,ADD CELLINTERRATHONCOV) -(SET INTERRATHOCOV,SET INTERRATHONCOV)

Interval Type 0~100000 0~100000 kbit/s 0 Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa kbit/s 0 Interval Type 0~320000 0~320000 kbit/s 0 Interval Type 0~3000000 0~3000000 kbit/s 0 Interval Type 0~4000000 0~4000000 kbit/s 0


0



0

Interval Type 0~50000 0~50000 kbit/s 0 Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa kbit/s 0 Interval Type 0~320000 0~320000 kbit/s 0 Interval Type 0~3000000 0~3000000 kbit/s 0 Interval Type 0~4000000 0~4000000 kbit/s 0 Interval Type 100~1000 100~1000 per cent 120 Enumeration Ty FULL_DUPLEX, HAL FULL_DUPLEX, HALF None - Interval Type 0~100 0~100 per cent 25

Bit Field Type NODEB_CREDIT_CAC NODEB_CREDIT_CAC_ None -

Bit Field Type SYS_LEVEL, NODEB_ SYS_LEVEL,NODEB_L None - Interval Type 1~5 1~5 s - Enumeration Ty NONE, DCH, HSPA NONE,DCH,HSPA None - Interval Type 0~5 0~5 None - Enumeration Ty NULL, IPLGCPORT, R NULL, IPLGCPORT, RS None NULL

Interval Type 0~31 0 to 31 None

-

Interval Type 0~31 0~31 None -


-


Enumeration Ty SAAL(SAAL Link Type SAAL, SCTP, SAAL-SC None-


-



-

Interval Type 0~5 0~5 None - Enumeration Ty ETHER, PPP, TRUNK ETHER PPP TRUNK None - Enumeration Ty IMA, UNI, FRA, NCO IMA,UNI,FRA,NCOPT, None -

Enumeration Ty UNI, IMA, FRAATM, UNI, IMA, FRAATM, None

-


-



-


-


-

IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 4500~32767 4500~32767 byte 4500 Interval Type 0~3 0~3 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Enumeration Ty OFF(OFF), ON(ON) OFF, ON None - Interval Type 1~1000 1~1000 kbit/s 32

Interval Type 1~2000 1~2000 kbit/s 512 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Enumeration Ty 10, 100, 1000 10,100,1000 ms 1000 Enumeration Ty AUTO, MANUAL AUTO,MANUAL None AUTO

Interval Type 100~1000 ms 1000 Interval Type 1024~13300000 102400 to 1330000000 ns 1024 Interval Type 1~100 1~100 None - Interval Type -32767~32767 -32767~32767 m - Interval Type -107502~107502 -107502~107502 m -

Bit Field Type TX_DIVERSITY_ON_T None TX_DIVERSIT

Bit Field Type DELAY_ACTIVATION DELAY_ACTIVATION_ None - Interval Type -32767~32767 -32767~32767 m -

UNI: 700~1000NNI: 100~1000

TX_DIVERSITY_ON_TO_OFF,TX_DIVERSITY_OFF_TO_ON

Interval Type -107502~107502 -107502~107502 m - Interval Type -90000000~90000000 -90~90, step: 0.000001 degree - String Type - -90~90 second - Interval Type -180000000~180000000 -180~180, step: 0.000001 degree -

String Type - -180~180 second - Enumeration Ty ALLCELL(All cell), 3 ALLCELL,3GCELL,GS None - Enumeration Ty NLOS_ENVIRONMENT NLOS_ENVIRONMENT, None MIXED_ENVIR Enumeration Ty TU, RA, HT TU, RA, HT None TU

Interval Type -10000~10000 -10000~10000 m -

Interval Type -32808~32808 -32808~32808 m - Interval Type 1~100 1~100 None - Enumeration Ty SINGLE_HOST, DOUB SINGLE_HOST, DOUBL None SINGLE_HOST Interval Type 0~65535 {0~65535} None -


-

Interval Type 0~65535 0~65535 None - Interval Type 1~31 1~31 d - Enumeration Ty OFF, ON OFF,ON None - Enumeration Ty INACTIVE, ACTIVE INACTIVE, ACTIVE None ACTIVE Enumeration Ty UE_BASED, UE_ASSI UE_BASED, UE_ASSIS None - Enumeration Ty SF4(SF4), SF8(SF8), S SF4, SF8, SF16, SF32, S None SF8 Enumeration Ty CELL_ANTENNA, CE CELL_ANTENNA, CELL None -

String Type - 1~31 characters None

-

Interval Type 0~100 0~1, step:0.01 per cent 90 Interval Type 1~65535 1~65535 None - Interval Type 1~65535 1~65535 s - Enumeration Ty RESERVED, NOT_RE RESERVED, NOT_RES None NOT_RESERVE Enumeration Ty RESERVED, NOT_RE RESERVED, NOT_RES None NOT_RESERVE Enumeration Ty AFFECT, NOT_AFFEC AFFECT,NOT_AFFECT None AFFECT Enumeration Ty AFFECT, NOT_AFFEC AFFECT,NOT_AFFECT None AFFECT Interval Type 1~100 1~100 None -

Interval Type 0~100 0~1, step:0.01 per cent 30

Enumeration Ty NOT_REQUIRE, REQU NOT_REQUIRE, REQUI None

-

Bit Field Type CFG_DL_BLIND_DET CFG_DL_BLIND_DETE None - Interval Type 0~999 0~999 s - Interval Type 0~180 0~180 s - Enumeration Ty NO_CODING, CONVO NO_CODING,CONVOLU None CONVOLUTIO Interval Type 1~5 1~5 None 5 Enumeration Ty CH0(Channel 0), CH1(C CH0,CH1,CH2,CH3,CH4 None - Interval Type 0~31 0 to 31 None - Interval Type 0~31 0 to 31 None - Enumeration Ty NO, YES NO, YES None NO Enumeration Ty NO, YES NO, YES None NO Enumeration Ty ALDER32, CRC32 ALDER32, CRC32 None CRC32 Enumeration Ty SBFD, ARP, MBFD SBFD, ARP, MBFD None -

Enumeration Ty TEN_MSEC, MIN TEN_MSEC, MIN None-




Enumeration Ty TEN_MSEC, MIN TEN_MSEC, MIN None -



Enumeration Ty TEN_MSEC, MIN TEN_MSEC, MIN None



Enumeration Ty TEN_MSEC, MIN TEN_MSEC, MIN None Enumeration Ty OFF(OFF), ON(ON) OFF,ON None - Interval Type 0~65535 0~65535 None - Interval Type -50~50 -50~50 dB 0

TEN_MSEC(ADD CELLQUALITYMEAS) -(SET QUALITYMEAS)




Interval Type -20~20 -10~10, step: 0.5 dB

0

Interval Type -50~50 -50~50 dB 0

Interval Type -20~20 -20~20 dB0

Interval Type 1~1000 64~64000 step:64 kbit/s - Enumeration Ty GCUa, GCGa GCUa,GCGa None - Enumeration Ty TRUE, FALSE TRUE, FALSE None FALSE Bit Field Type UL_ONLY, DL_ONLY, UL_ONLY, DL_ONLY, None UL_DL_BOTH

Enumeration Ty WALKING_SPEED_AN WALKING_SPEED_AND None Bit Field Type CMCF_DL_HLS_SWIT CMCF_DL_HLS_SWITC None - Interval Type 1~10000 1~10000 ms -

WALKING_SPEED_AND_HOT_SPOT_CELL(ADD CELLCMCF) -(SET CMCF)

Bit Field Type CMP_IU_IMS_PROC_ CMP_IU_IMS_PROC_A None -

Enumeration Ty CS_DOMAIN, PS_DO CS_DOMAIN,PS_DOMA None

-


-

Enumeration Ty NORMAL, OFFLOAD, NORMAL,OFFLOAD,IN None - Enumeration Ty SHARE, EXCLUSIVE SHARE, EXCLUSIVE None - Interval Type 0~3 0 to 3 None - String Type - 1~31 characters None - Interval Type 0~31 0~31 None -


-

String Type - 1~31 characters None - Interval Type 0~3,5~31 0~3,5~31 None - Interval Type 0~3 0~3 None - Interval Type 0~3,5~31 0~3,5~31 None - Interval Type 0~3,5~31 0~3,5~31 None - Interval Type 0~3,5~31 0~3,5~31 None - Interval Type 0~3,5~31 0~3,5~31 None - Interval Type 5~31,255 5~31,255 None 255 Enumeration Ty ONE(One), TWO(Two), 1,2,3,4 None - Enumeration Ty R99, R4, R5, R6, R7 R99,R4,R5,R6,R7 None - Enumeration Ty OFF(OFF), ON(ON) To enlarge the throughout None ON Interval Type 1~16 1~16 None 3

Interval Type 0~100 0~100 per cent

-(SET DRD) 13(ADD CELLDRD)

Enumeration Ty SF4, SF8, SF16, SF32, SF4, SF8, SF16, SF32, S None

Enumeration Ty ON, OFF ON, OFF None Enumeration Ty FALSE(FALSE), TRUE FALSE, TRUE None FALSE Enumeration Ty GERMAN(German), ENG GERMAN, ENGLISH, I None -

Enumeration Ty COEXIST_MEAS_THD COEXIST_MEAS_THD_ None Interval Type 0~100 0~1,step: 0.01 per cent -

Interval Type 0~100 0~10, step: 0.1 dB

-(SET DRD) SF8(ADD CELLDRD)

-(SET DRD) OFF(ADD CELLDRD)

COEXIST_MEAS_THD_CHOICE_INTERFREQ(ADD CELLHOCOMM) -(SET HOCOMM)

20(ADD CELLDCCC) -(SET DCCC)

Enumeration Ty NON-SUPPORTING_UE_O NON-SUPPORTING_UE None - Interval Type 1~7 1~7 s 2 Interval Type 30~90 30~90 s 30 Interval Type 10~200 10~200 ms 10 Interval Type 10~150 10 to 150 ms 15 Interval Type 10~150 10 to 150 ms 15 Interval Type 10~150 10 to 150 ms 15 Interval Type 10~150 10 to 150 ms 15 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 25 Interval Type 10~150 10 to 150 ms 50 Interval Type 10~150 10 to 150 ms 50 Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None - Enumeration Ty OFF, Only_To_Inter_Fr OFF, Only_To_Inter_Fre None - Enumeration Ty ALLOWED, NOT_AL ALLOWED, NOT_ALL None NOT_ALLOWE Enumeration Ty YES, NO YES,NO None NO

Interval Type 0~20 0~40, step:2 dB 2

Interval Type 0~20,255 {0~40},{255}, step:2 dB -

Interval Type -50~50 -50~50 dB

0


0

Interval Type -16~10,127 {-32~20},{127}, step:2 dB 127 Interval Type -16~10,127 {-32~20},{127}, step:2 dB 127 Enumeration Ty D10, D20, D40, D80, D 10, 20, 40, 80, 160, 320, s D1280 Interval Type -35~-10 -35~-10 dB -20 Enumeration Ty Context, Context_Group Context,Context_Group,A None - Enumeration Ty NO, YES NO,YES None NO Enumeration Ty D0, D8, D16, D32, D64 D0, D8, D16, D32, D64, kbit/s - Enumeration Ty D0, D8, D16, D32, D64 D0, D8, D16, D32, D64, kbit/s - Interval Type 1~1000 1~1000 kbit/s 32 Interval Type 1~2000 1~2000 kbit/s 512

Enumeration Ty WBAMR_BITRATE_6.6 6.60, 8.85, 12.65, 14.25, kbit/s

WBAMR_BITRATE_23.85K(ADD CELLAMRCWB) -(SET AMRCWB)

Enumeration Ty NBAMR_BITRATE_4.7 4.75, 5.15, 5.90, 6.70, 7.4 kbit/s Interval Type 1~28 1 to 28 None 5 Interval Type 1024~4294967295 1024~4294967295 None - Enumeration Ty ON, OFF ON,OFF None -

Enumeration Ty CP1_Supported, CP1_no CP1_Supported, CP1_not None Enumeration Ty D0, D1, D2, D4, D8, D 0,1,2,4,8,16,32,64,128,2 None - Enumeration Ty D0, D2, D4, D8, D10, D 0,2,4,8,10,20,40,80,160,1 ms - Interval Type 1~16 1~16 None 8 Enumeration Ty UNAVAILABLE, AVA UNAVAILABLE, AVAI None UNAVAILABLE Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 100 Interval Type 0~51000 0 to 51000 Erl -

Interval Type 0~100 0~100% per cent Enumeration Ty OFF, ON OFF, ON None - Interval Type 60~900 60~900 s -

NBAMR_BITRATE_12.20K(ADD CELLAMRC) -(SET AMRC)

CP1_not_Supported


Enumeration Ty SUPP_NONE, SUPP_I SUPP_NONE,SUPP_IU None - Interval Type 1~10 1~10 None - Enumeration Ty FALSE, TRUE FALSE,TRUE None - Enumeration Ty ON, OFF ON,OFF None OFF Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 100 Bit Field Type CS_AMRC_SWITCH, CS_AMRC_SWITCH, C None -

Enumeration Ty DCH(UL_DCH,DL_DCH DCH,HSPA None - Interval Type -100~100 -100~100 ms - Interval Type -100~100 -100~100 ms - Enumeration Ty EDCH_TTI_10ms, EDC EDCH_TTI_10ms, EDCH None - Enumeration Ty OFF, ON OFF, ON None OFF


Enumeration Ty BIT2, BIT4, BIT6, BIT8 2, 4, 6, 8, 12, 16, 24 bit Interval Type 1~10 0.01~0.1, step:0.01 per cent - Interval Type 0~100 0~1, step:0.01 per cent - Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 None - Enumeration Ty ON, OFF ON,OFF None - Enumeration Ty VPLCX, VCLCX VPLCX, VCLCX None - Interval Type 0~4799 0~4799 None -

BIT4(ADD SCCPCHBASIC) BIT2(ADD PRACHBASIC)

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 256, 5 byte - Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Interval Type 1~255 1~255 s -

Interval Type 0~255 0~255 None - Enumeration Ty RATE_UP_AND_DOW RATE_UP_AND_DOWN None - Interval Type 1~65535 1~65535 s -

Interval Type 1~1000 10~10000, step: 10 ms - Interval Type 0~1023 0~1023 None 16 Interval Type 0~1023 0~1023 None 2 Interval Type 1~126,128~223 1 to 126,128 to 223 None - Interval Type 0~3,255 0~3,255 None - Interval Type -35~-10 -35~-10 dB - Interval Type -30~30 -30~30 dB -13 Interval Type 4~255 4 to 100(AEUa),4 to 255 ms - Interval Type 0~3600 0~3600 s - Interval Type 1~5 1~5 None - Interval Type 1~5 1~5 None - Interval Type 0~100 0~100 per cent -

Interval Type -2~-1 -4~-2,step:2 None

-


-

IP Address Typ - None None - IP Address Typ - None None -


-

Interval Type 1~60 1 to 60 min 1

Enumeration Ty UPLINK, DOWNLINK UPLINK, DOWNLINK None - Enumeration Ty MAY(NodeB chooses wh MAY, MUST, MUST_N None - Interval Type 0~100 0~1, step: 0.01 None -

Interval Type 1~6000 10~60000, step: 10 ms Interval Type 0~100 0~1, step: 0.01 None -

Enumeration Ty D0, D1, D2, D3, D4, D5 D0, D1, D2, D3, D4, D5, None-

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s -

64(ADD CELLQUALITYMEAS) -(SET QUALITYMEAS)

Enumeration Ty D8, D16 8, 16 kbit/s Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, kbit/s -

Interval Type 1~6000 10~60000, step: 10 ms



Interval Type 0~100 0~1, step:0.01 None 0

Interval Type 0~100 0~1, step:0.01 None 90 Bit Field Type SF/2, HIGHER_LAYE SF/2, HIGHER_LAYER None SF/2

-(SET FRCCHLTYPEPARA) D8(ADD CELLFRC)




3


3

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s -

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s Enumeration Ty D0, D8, D16, D32, D64 0, 8, 16, 32, 64, 128, 144, kbit/s -

Enumeration Ty SF4(SF4), SF8(SF8), S SF4,SF8,SF16,SF32,SF6 None SF32

D64(ADD CELLDCCC) -(SET DCCC)

Interval Type 0~100 0~1, step:0.01 None 85 Interval Type 0~100 0~1, step:0.01 None 0 Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~400000 0~400000 bit/s 200000 Interval Type 0~100 0~1, step:0.01 per cent 20 Interval Type 1~10 1~10 None 1



1

Enumeration Ty SF4(SF4), SF8(SF8), S SF4,SF8,SF16,SF32,SF64 None

SF8

Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None no action

Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None

no action


CodeAdj(ADD CELLLDR) BE traff rate reduction(ADD NODEBLDR)


no action



1


Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None no action

inter-freq load handover(ADD CELLLDR) no action(ADD NODEBLDR)


no action


Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None Interval Type 0~100 0~1, step:0.01 per cent 70 Interval Type 10~600000 10~600000 ms 1000 Enumeration Ty D16, D32, D48, D64, D 16, 32, 48, 64, 96, 128, 2 None D64 Interval Type 0~100 0~1, step:0.01 None 0

Enumeration Ty D0, D1, D2, D3, D4, D5 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, None Enumeration Ty AUTO_CALC, HAND_ 0, 1 None -

BE traff rate reduction(ADD CELLLDR) no action(ADD NODEBLDR)

D1(ADD CELLQUALITYMEAS) -(SET QUALITYMEAS)

Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 144, 256, kbit/s -

Interval Type 1~4294967295 1~4294967295 ms

-

Interval Type 0~100 0~1, step: 0.01 None -


Interval Type 1~10 1~10 None 3



Interval Type 0~100 0~1, step:0.01 per cent 85 Interval Type 0~10 0~10 None 0

Interval Type 1~6000 10~60000, step:10 None-

Enumeration Ty SF4, SF8, SF16, SF32, SF4,SF8,SF16,SF32,SF64 None -


1


1

Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None -

Interval Type 0~512 0~512 s Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty OFF(The switch of DL R9 OFF,ON None - Enumeration Ty 2_Rates, 3_Rates 2_Rates, 3_Rates None - Enumeration Ty 2_Rates, 3_Rates 2_Rates, 3_Rates None -

Interval Type -15~15 -15~15 dB Enumeration Ty D4, D8, D16, D32, D64 SF4, SF8, SF16, SF32, S None -

20(ADD CELLQOSHO) -(SET QOSHO)


Enumeration Ty FALSE(Not Limited), T FALSE,TRUE None -

Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,256 None Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~1, step: 0.01 None - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s -

Interval Type 0~559 0~55.9, step: 0.1 dB

-

Interval Type 0~559 0~55.9, step: 0.1 dB

-

Interval Type 1~560 0.1~56, step: 0.1 dB

-

D64(ADD CELLCMCF) -(SET CMCF)

Interval Type 1~560 0.1~56, step: 0.1 dB

-


Interval Type 1~6000 10~60000, step: 10 ms Interval Type 3~505 3~505 cell/s - Enumeration Ty PsBlk(BLOCK PS), Cs PsBlk, CsAndPsBlk None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Interval Type 1~16777215 1~16777215 None - Enumeration Ty D1, D2, D5 1,2,5 None - Enumeration Ty D1, D2, D5 1,2,5 None - Enumeration Ty SLOT_FORMAT_1, S SLOT_FORMAT_1, SL None - String Type - 1~11 characters None -

Enumeration Ty None, STTD, CP1 None, STTD, CP1 None

None


None

Enumeration Ty SINGLE_TPC, TPC_T SINGLE_TPC, TPC_TR None - Enumeration Ty IUCS(Iu-CS node), IU IUCS, IUPS, IUR, IUC None - Interval Type 1024~3584 1024 to 3584 None -


Interval Type 8~19 8 to 19 None -


-

Enumeration Ty SINK, SOURCE, BOTH SINK, SOURCE, BOTH None BOTH

Bit Field Type DRA_AQM_SWITCH, DRA_AQM_SWITCH, D None -

Interval Type -24~0 -12~0,Step:0.5 dB-18

Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms -

Interval Type 0~5 0~5 None Enumeration Ty NO, YES NO, YES None - Interval Type 10~150 10 to 150 ms 60 Interval Type 10~150 10 to 150 ms 60 Interval Type 10~150 10 to 150 ms 60 Interval Type 10~150 10 to 150 ms 60 Interval Type 10~150 10 to 150 ms 80 Interval Type 10~150 10 to 150 ms 80 Bit Field Type DR_RRC_DRD_SWITC DR_RRC_DRD_SWITC None - Enumeration Ty D4, D5, D8, D10, D16, 4,5,8,10,16,20 None - Interval Type 6~9 6~9 None 6


Interval Type 3~9 3~9 None - Enumeration Ty FALSE, TRUE FALSE,TRUE None - Enumeration Ty OFF, ON OFF,ON None -


-

Enumeration Ty OFF, ON OFF,ON None -

Interval Type 0~63 0 to 63 None Interval Type 0~21 0 to 21 None - Enumeration Ty YES, NO YES, NO None - Interval Type 0~31 0 to 31 None -

IP Address Typ - 0.0.0.0~255.255.255.255 None

-

IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Enumeration Ty TS1(Time_slot_1), TS2( TS1, TS2, TS3, TS4, TS5 None - Enumeration Ty D1, D4, D5, D8, D10, D 1,4,5,8,10,16,20 None - Enumeration Ty D4, D5, D8, D10, D16, 4,5,8,10,16,20,32,40,64,8 None - Enumeration Ty D0, D1, D2, D4, D8, D1 0, 1, 2, 4, 8, 16, 32, 64, 1 frame - Enumeration Ty D2, D4, D15 2,4,15 slot - Enumeration Ty OFF, ON OFF,ON None - Enumeration Ty Half(Half duplex), Full( Half(Half duplex), Full(Fu None -

0(PING IP) -(SET PHBMAP,SET DSCPMAP) 62(ADD SCTPLNK)

Interval Type 1~3600 1~3600 s - Interval Type 60~3600 60~3600 s - Enumeration Ty OFF(switch off), ON(swi OFF, ON None - Enumeration Ty OFF(switch off), ON_1( OFF, ON_1, ON_2, ON_3 None - Enumeration Ty FORCESHUTDOWN(For FORCESHUTDOWN, C None CONDITIONA Interval Type 0~31 0 to 31 None - Interval Type 1~10000 10~100000 Step: 10ms ms - Interval Type 0~1023 0~1023 None - Interval Type 0~384 0~384 kbit/s - Interval Type 0~1023 0~1023 None - Interval Type 1~8 1~8 None 1 IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 0~5000 0~5, step: 0.001 dB - Interval Type 1~1000 10~10000, step: 10 ms -

Interval Type 0~65535 0~65535 ms Interval Type 0~5000 0~5, step: 0.001 dB - Interval Type 0~5000 0~5, step: 0.001 dB -

Interval Type 0~49 -24.5~0 dB Interval Type 1~31 1 to 31 None - Interval Type 1~5000 1~5000 bit 336 Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Enumeration Ty D1, D2, D3, D4, D5, D6 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 None D1 Interval Type 0~1023 0~1023 None 16 Interval Type 0~1023 0~1023 None 16 Bit Field Type RATE_8KBPS, RATE_1 8, 16, 32, 64, 128, 144, 2 None - Interval Type 0~5000 0~5, step: 0.001 dB -

-(SET FRC) 30000(ADD CELLFRC)

-(SET FRC) 41(ADD CELLFRC)

Interval Type 0~15000 0~15, step:0.001 None -

Interval Type 0~15000 0~15, step:0.001 None - Interval Type 0~1023 0~1023 None 2 Interval Type 0~1023 0~1023 None 2 Enumeration Ty EDCH_10MS, EDCH_2 EDCH_10MS,EDCH_2M None - Interval Type 0~100 0~100 per cent 20 Interval Type -350~150 -35~15,step:0.1 dB 10 Enumeration Ty TRUE, FALSE FALSE,TRUE None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty FALSE(Forbidden), TRU FALSE,TRUE None - Enumeration Ty DATE, WEEK, DATE DATE, WEEK, DATEW None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty OFF, ON OFF, ON None OFF Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty JAN(January), FEB(Feb JAN, FEB, MAR, APR, None - IP Address Typ - 0.0.0.0~255.255.255.255 None -

Bit Field Type UEA0~0 UEA1 For each switch of this p None - Compound Typ HOUR, MIN 00:00~23:59 min - Compound Typ HOUR, MIN 00:00~23:59 min - Compound Typ HOUR, MIN 00:00~23:59 min -

Enumeration Ty M3UA_SGP(M3UA SPG) M3UA_SGP, M3UA_IPS None-

Interval Type 1~1000 1 to 1000 None 1 Interval Type 1~60 1 to 60 s 1 Interval Type 1~1000 1 to 1000 None 1 Interval Type 1~4294967295 1 to 4294967295 None 204800 Interval Type 1~900 1 to 900 s 1 Interval Type 10~900 10 to 900 s 60 Interval Type 1~8 1~8 None 1 Interval Type 5000~30000 5000~30000 ms - Interval Type 5000~30000 5000~30000 ms - Compound Typ HOUR, MIN, SEC HOUR, MIN, SEC None - Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 51 byte D1024 Enumeration Ty D8, D16, D32, D64, D 8, 16, 32, 64, 128, 256, byte - Interval Type 0~1000 0~100, step: 10 ms 50 Interval Type 0~1000 0~100, step: 0.1 per cent 160 Interval Type 0~1000 0~100, step: 0.1 per cent 80 Enumeration Ty SUN(Sunday), MON(Mon SUN, MON, TUE, WED, None - Enumeration Ty FIRST(First), SECOND( FIRST, SECOND, THIR None - String Type - 1~9 character None - String Type - 1~9 character None - Enumeration Ty VOLTAGE(Voltage), C VOLTAGE,CURRENT None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - Enumeration Ty VOLTAGE(Voltage), C VOLTAGE,CURRENT None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - Enumeration Ty VOLTAGE(Voltage), C VOLTAGE,CURRENT None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - String Type - 1~9 character None - Enumeration Ty VOLTAGE(Voltage), C VOLTAGE,CURRENT None - String Type - 1~9 character None - String Type - 1~9 character None - Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Interval Type 1~32 1~32 None -


Interval Type -350~150 -35~15, step: 0.1 dB Enumeration Ty REQUIRE, NOT_REQU REQUIRE,NOT_REQUI None REQUIRE Interval Type 0~30 0~3,step:0.1 dB 0 Interval Type 0~100 0%~100% per cent - Interval Type 0~100 0~100 per cent - Interval Type 1~255 1~255 None - Enumeration Ty ENABLE, DISABLE ENABLE, DISABLE None -


10(ADD CELLMBMSFACH) -(SET MSCHFACH,SET MBMSFACH)

1(ADD ATMLOGICPORT,ADD UNILNK,ADD IMAGRP,ADD FRALNK) -(ADD PORTFLOWCTRLPARA,SET ETHPORT,SET OPT) 0(ADD IPLOGICPORT,ADD PPPLNK,ADD MPGRP)

Enumeration Ty None, 16bit, 32bit None(No CRC check), 16b None

16bit

Enumeration Ty STEPSIZE_0.5DB, STE 0.5, 1, 1.5, 2 dB -

Enumeration Ty None, STTD None, STTD None

None

Enumeration Ty None, STTD None, STTD None

None

Interval Type -350~150 -35~15, step:0.1 dB - Interval Type -350~150 -35~15, step:0.1 dB - Interval Type 0~24 0~6, step: 0.25 dB - IP Address Typ - 0.0.0.0~255.255.255.255 None -

String Type - 0 to 128 characters None

-

String Type - 0 to 128 characters None -

Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None -

Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None Enumeration Ty D4, D6, D8, D12, D16, 4, 6, 8, 12, 16, 24, 32 None D32 Enumeration Ty OFF(OFF), ON(ON) OFF, ON None ON

D3(ADD CELLINTERRATHOCOV) -(SET INTERRATHOCOV)

Enumeration Ty OFF, ON OFF, ON None Interval Type 0~299 0~299 None - String Type - 1~128 characters None - String Type - 0 to 100 characters None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty NO, YES NO, YES None NO Interval Type 1~10 1~10 ms 2 Interval Type 128~1024 128 to 1024 byte 256


Enumeration Ty FRAATM, FRAIMA FRAATM, FRAIMA None - Enumeration Ty D32, D64, D128, D256 D32,D64,D128,D256 None D128 Interval Type 0~33 0~33 None - Interval Type 1~33 1~33 None - Bit Field Type PDCP, AMRC, TFOTR PDCP,AMRC,TFOTRFO None - Bit Field Type WBAMR, HSUPA, RA WBAMR,HSUPA,RANSH None - Bit Field Type SRNSRWCUPDATE, L SRNSRWCUPDATE,LOS None - Bit Field Type DYNAMIC_POWER_ES DYNAMIC_POWER_EST None -

ON(ADD ATMLOGICPORT,ADD UNILNK,ADD MPGRP,ADD IPLOGICPORT,ADD IMAGRP,ADD PPPLNK,ADD FRALNK) -(SET ETHPORT,SET OPT)


0

Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa kbit/s 0 Interval Type 0~320000 0~320000 kbit/s 0 Interval Type 0~3000000 0~3000000 kbit/s 0 Interval Type 0~4000000 0~4000000 kbit/s 0


0



0

Interval Type 0~149000 AOUa/AEUa: 0~64000; UOIa kbit/s 0 Interval Type 0~320000 0~320000 kbit/s 0 Interval Type 0~3000000 0~3000000 kbit/s 0 Interval Type 0~4000000 0~4000000 kbit/s 0 Interval Type 1~15 1~15 None - Interval Type 0~15 0~15 None 15 IP Address Typ - 0.0.0.0~255.255.255.255 None -

Enumeration Ty DEG(DEG), SEC(SEC) DEG, SEC None DEG Enumeration Ty DEG(DEG), SEC(SEC) 0~1 None - Interval Type 0~100 0~100 per cent 70 Interval Type 0~100 0~100 per cent 70


Enumeration Ty NBAMR_BITRATE_4.7 4.75, 5.15, 5.90, 6.70, 7.4 kbit/s Enumeration Ty OFF(OFF), ON(ON) OFF, ON None OFF Interval Type 1~60 1 to 60 min 10 Interval Type 0~119 0~119 None - Enumeration Ty ATM, IP ATM, IP None -




String Type - 1~31 characters None - Interval Type 1~512 1~512 None - Interval Type 0~5000 0~5000 kbit/s - Enumeration Ty Mode0, Mode1 Mode0,Mode1 None Mode0 Enumeration Ty D2, D10, D20, D50, D1 2, 10, 20, 50, 100, 200, 5 ms D50 Interval Type 1000~600000 1000~600000 ms 5000

Enumeration Ty UNI, IMA, FRAATM, UNI, IMA, FRAATM, N None - Interval Type 0~300 0~300 s 5


0

Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 per cent 70 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100

Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 per cent 15 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 50 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 70 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~31 0 to 31 None - Bit Field Type DL_DCCH_SWITCH, DL_DCCH_SWITCH, I None - Enumeration Ty OFF, ON OFF,ON None - Interval Type 0~83 0 to 83 None - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms -

Interval Type 0~3 0~3 None 2 Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Enumeration Ty SINGLEHOST(SingleHo SingleHost, PrimHost, Se None SingleHost

Bit Field Type HO_ALGO_HCS_SPEE HO_ALGO_HCS_SPEED None - Interval Type -24~0 -24~0 dB -16 Interval Type -115~-25 -115~-25 dB -92 Interval Type 1~10000 1~10000 ms - Interval Type 0~3 0 to 3 None - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~1, step:0.01 per cent 30 Enumeration Ty FALSE(Forbidden), TRU FALSE,TRUE None - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~1, step: 0.01 None -



Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~1, step:0.01 per cent 70 Interval Type 0~3264000 0 to 3264000 kbit/s - Interval Type 0~5 0~5 None 0

Interval Type 1~5000 1~5000 bit 336 Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Interval Type 1~5000 1~5000 bit - Enumeration Ty D1, D2, D3, D4, D5, D6 1, 2, 3, 4, 5, 6, 7, 8 None D1 Interval Type 14~27 14 to 27 None - Enumeration Ty E_F_DPCH_OFF, E_F E_F_DPCH_OFF,E_F_D None E_F_DPCH_OFF Enumeration Ty MIMO, 64QAM MIMO,64QAM None - Bit Field Type 64QAM, MIMO, E_FA 64QAM,MIMO,E_FACH None - Interval Type -500~0 -50~0, step:0.1 dB 0 Interval Type 0~1024 0~1024 s - Enumeration Ty FALSE, TRUE FALSE, TRUE None - Enumeration Ty FALSE, TRUE FALSE, TRUE None - Enumeration Ty FALSE, TRUE FALSE, TRUE None - Enumeration Ty FALSE, TRUE FALSE, TRUE None - Interval Type 1~15 1~15 None 5


Interval Type 1~15 1~15 None 1 Enumeration Ty Minus3.0DB(-3.0dB), M -3~19, step:0.5 dB 2.5dB


None

Interval Type 0~5 0 to 5 None - Interval Type 1~15 1~15 None 4 Enumeration Ty D10, D20, D50, D100, 10, 20, 50, 100, 200, 500, ms - Enumeration Ty D10, D20, D50, D100, 10, 20, 50, 100, 200, 500, ms - Enumeration Ty D2, D10, D20, D50, D1 2,10, 20, 50, 100, 200, 50 ms - Enumeration Ty D2, D10, D20, D50, D1 2,10, 20, 50, 100, 200, 50 ms - Interval Type 0~100 0~1, step: 0.01 None - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s - Enumeration Ty MBR, GBR MBR, GBR None MBR Enumeration Ty Limited, Permit, Base For each switch of this p None - Interval Type 0~100 0~1, step: 0.01 None - Enumeration Ty RATE_UP_AND_DOW RATE_UP_AND_DOWN None - Interval Type 0~100 0~1, step:0.01 per cent 100 Interval Type 0~100 0~1, step:0.01 per cent 100 Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~1, step:0.01 per cent 100 Interval Type 1~32 1~32 None - Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None -

Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~3264000 0 to 3264000 kbit/s -


Interval Type 0~100 0~1, step:0.01 per cent 70 Interval Type 0~5 0~5 None 0 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 70 Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100

Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - String Type - 1~9 character per cent - String Type - 1~9 character per cent - Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Interval Type 0~167 0 to 167 None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 15 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 50 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 per cent 70 Interval Type 32~65535 32 to 65535 None - Interval Type 0~255 0 to 255 None -

Interval Type 0~15 0~7.5,Step:0.5 dB



0(ADD CELLINTRAFREQHO) -(SET INTRAFREQHO)






Interval Type 0~29 0~14.5,Step:0.5 dB/ dBm

Interval Type 0~29 0~14.5,Step:0.5 dB Interval Type 0~29 0~14.5,Step:0.5 dB 6






Interval Type 0~29 0~14.5,Step:0.5 dB/ dBm

4(ADD CELLINTERRATHOCOV,ADD CELLINTERFREQHOCOV) -(SET INTERRATHOCOV,SET INTERFREQHOCOV)

Interval Type 0~15 0~7.5,Step:0.5 dB 0


Interval Type 0~29 0~14.5,Step:0.5 dB/ dBm Interval Type 0~29 0~14.5,Step:0.5 dB/ dBm 0 Interval Type 180~1260 180~1260 s - Interval Type 60~600 60~600 s - Interval Type 44~1024 44~1024 byte 64 Interval Type 1~30,100~32767 1~30,100~32767 None - Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None - Enumeration Ty ALLOWED, NOT_AL ALLOWED, NOT_ALL None ALLOWED



Interval Type 0~20 0~40, step:2 dB 2

Interval Type 0~20,255 {0~40},{255}, step:2 dB -



Interval Type -16~10,127 {-32~20},{127}, step:2 dB 127 Interval Type -16~10,127 {-32~20},{127}, step:2 dB 127 Enumeration Ty D10, D20, D40, D80, D 10, 20, 40, 80, 160, 320, s D320

Interval Type 100~30000 ms - Interval Type 0~120 0~120 s - Interval Type 5000~30000 5000~30000 ms -

UNI: 10000~30000NNI: 100~30000

Interval Type 0~83 0 to 31(AEUa),0 to 83(A None

-



-

Enumeration Ty V1.0, V1.1 V1.0, V1.1 None V1.1 Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty DCH(UL_DCH,DL_DCH DCH, HSDPA, HSPA None - Interval Type 1~1000 1~1000 kbit/s 32 String Type - 15-bit decimal numerals None - String Type - 15-bit decimal numerals None - String Type - 15-bit decimal numerals None - Enumeration Ty D32, D64 32, 64 kbit/s - Interval Type 0~999 0~999 None - Interval Type 0~999 0~999 None - Interval Type 1~2000 1~2000 kbit/s 512

Enumeration Ty D1, D4, D8, D16, D32, 1,4,8,16,32,64,128,256 None - Enumeration Ty D0, D1, D2, D4, D8, D1 0,1,2,4,8,16,32,64,128,25 None - Enumeration Ty D0, D1, D2, D4, D8, D1 0,1,2,4,8,16,32,64,128,25 None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty LOGIC(Logic inhibit), LOGIC(Logic inhibit), P None - Interval Type 1200~2000 1200~2000 ms 1500 Bit Field Type UIA1 For each switch of this p None - Interval Type 1~1000 1~1000 kbit/s 32 Interval Type 1~2000 1~2000 kbit/s 512 Bit Field Type CSAMR_INTERFREQ, CSAMR_INTERFREQ,C None - Interval Type -24~0 -24~0 dB -16


-14(ADD CELLINTERFREQHOCOV) -(SET INTERFREQHOCOV)

Interval Type -115~-25 -115~-25 dBm


Interval Type -115~-25 -115~-25 dBm Interval Type 0~100 0~100 None 60

Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None D3 Enumeration Ty INTER_FREQ_COV(Covera INTER_FREQ_COV,IN None INTER_FREQ_


D3(ADD CELLINTERFREQHONCOV,ADD CELLINTERFREQHOCOV) -(SET INTERFREQHONCOV,SET INTERFREQHOCOV)

Interval Type -115~-25 -115~-25 dBm Enumeration Ty NOT_REQUIRE, INTE NOT_REQUIRE,INTER None INTER_FREQ_ Enumeration Ty CPICH_EC/NO(CPICH CPICH_EC/NO,CPICH_ None BOTH

Interval Type 0~512 0~512 s Interval Type 0~512 0~512 s 3 Enumeration Ty OFF, ON OFF,ON None -


60(ADD CELLINTERFREQHONCOV,ADD CELLINTERFREQHOCOV) -(SET INTERFREQHONCOV,SET INTERFREQHOCOV)

Interval Type -24~0 -24~0 dB -



Interval Type -115~-25 -115~-25 dBm Enumeration Ty INTERFREQ(inter-frequ INTERFREQ,INTERRA None SIMINTERFRE


Enumeration Ty PERIODICAL_REPORTING PERIODICAL_REPORT None

PERIODICAL_REPORTING(ADD CELLINTERFREQHOCOV) -(SET INTERFREQHOCOV)

Enumeration Ty PERIODICAL_REPORTING PERIODICAL_REPORT None PERIODICAL_ Interval Type 4~19,255 {1~4.75},{255}, step:0.25 None 255 Interval Type 0~100 0~100 None 45 Enumeration Ty NO, YES NO,YES None - Enumeration Ty NO, YES NO,YES None - Bit Field Type CSAMR_INTERRAT CSAMR_INTERRAT None -


-14(ADD CELLINTERRATHOCOV) -(SET INTERRATHOCOV)


Interval Type -115~-25 -115~-25 dBm Interval Type 0~100 0~100 None 60



Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None

D3(ADD CELLINTERRATHONCOV,ADD CELLINTERRATHOCOV) -(SET INTERRATHONCOV,SET INTERRATHOCOV)

Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None D3

Interval Type 1~16 1~16 None Enumeration Ty NO, YES NO, YES None -


Interval Type 0~63 lower than -110, -110~-48( dBm 21 Enumeration Ty DRD, MEAS_BASED DRD, MEAS_BASED None -

Interval Type 0~512 0~512 s

60(ADD CELLINTERRATHONCOV,ADD CELLINTERRATHOCOV) -(SET INTERRATHONCOV,SET INTERRATHOCOV)

Interval Type 0~512 0~512 s 3 Enumeration Ty OFF, ON OFF,ON None -

Interval Type 0~63 lower than -110, -110~-48( dBm


Enumeration Ty NON_PERIODIC_REPORT NON_PERIODIC_REPORT,2 ms


Enumeration Ty NON_PERIODIC_REPORT NON_PERIODIC_REPORT,2 ms D1000 Interval Type 0~63 0~63 None 3 Interval Type 0~63 0~63 None 3 Interval Type 0~63 0~63 None - Interval Type 0~63 0~63 None -

Interval Type 0~15 0~7.5,Step:0.5 dBm


Enumeration Ty PERIODICAL_REPORTING PERIODICAL_REPORT None

PERIODICAL_REPORTING(ADD CELLINTERRATHOCOV) -(SET INTERRATHOCOV)

Enumeration Ty PERIODICAL_REPORTING PERIODICAL_REPORT None PERIODICAL_ Interval Type 4~19,255 {1~4.75},{255}, step:0.25 None 255 Interval Type 0~100 0~100 None 45 Interval Type 1~10 1 to 10 s 1

Enumeration Ty D0, D1, D2, D3, D4, D5 0,1,2,3,4,5,6,7,8,9,11,13, None D3

Interval Type 1~86400 1~86400 s-

Enumeration Ty REQUIRE, NOT_REQU REQUIRE,NOT_REQUI None REQUIRE

Enumeration Ty CPICH_EC/NO(CPICH CPICH_EC/NO, CPICH_ None Enumeration Ty OFF, ON OFF,ON None - Interval Type 0~29 0~14.5, step: 0.5 dB -

CPICH_EC/NO(ADD CELLINTRAFREQHO) -(SET INTRAFREQHO)

Interval Type 0~29 0~14.5,Step:0.5 dB Interval Type 0~29 0~14.5, step: 0.5 dB -


Interval Type 0~29 0~14.5,Step:0.5 dB Interval Type 15000~120000 15000~120000 ms - IP Address Typ - 0.0.0.0~255.255.255.255 None -



-

IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Enumeration Ty No_HC, UDP/IP_HC No_HC(Disable head com None UDP/IP_HC Enumeration Ty No_HC, UDP/IP_HC No_HC(Disable head com None UDP/IP_HC Interval Type 1~5 1 to 5 None -


-

Enumeration Ty NO, YES NO(Not binding), YES(Bi None - Interval Type 0~119 0 to 119 None - Interval Type 14~27 14 to 27 None - Interval Type 0~5 0 to 5 None - Enumeration Ty SUPPORT(Support), N SUPPORT, NOT_SUPPO None - Enumeration Ty PRIMARY, SECOND PRIMARY, SECOND None -

Enumeration Ty PRIMARY, SECOND PRIMARY, SECOND None

-

Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty BARRED, NOT_BARR BARRED, NOT_BARRE None NOT_BARRED Enumeration Ty NO, YES NO,YES None NO Enumeration Ty NO, YES NO, YES None -

Enumeration Ty FALSE, TRUE FALSE, TRUE None FALSE

Enumeration Ty NO, YES NO,YES None YES Enumeration Ty NO(NOT QOSPATH), Y NO,YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty IUB, IUR, IUCS, IUPS IUB, IUR, IUCS, IUPS None -

Enumeration Ty IUB, IUR, IUCS, IUPS IUB,IUR,IUCS,IUPS None-

Interval Type 1~3600 1~3600 s - Interval Type 0~10 0~10 None 1 Interval Type 0~10 0~10 None 1 Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Enumeration Ty OFF, ON OFF, ON None OFF Enumeration Ty TRUE, FALSE TRUE, FALSE None - Enumeration Ty OFF, ON OFF, ON None OFF Enumeration Ty OFF, ON OFF, ON None OFF Interval Type 0~16777215 0~16777215 None - Enumeration Ty NULL, 1byte, 16byte, 6 NULL, 1 byte, 16 byte, 64 None - String Type - None None - Enumeration Ty NULL, 1byte, 16byte, 6 NULL, 1 byte, 16 byte, 64 None - String Type - None None - Enumeration Ty NULL, 1byte, 16byte, 6 NULL,1byte,16byte,64byt None - String Type - None None - Enumeration Ty NULL, 1byte, 16byte, 6 NULL, 1 byte, 16 byte, 64 None - String Type - None None -

Enumeration Ty NULL, 16byte, 64byte NULL, 16 byte, 64 byte None -

String Type - 1~15 characters None -

Enumeration Ty NULL, 16byte, 64byte NULL, 16 byte, 64 byte None -

String Type - None None - Enumeration Ty NOT-INDICATE-END, NOT-INDICATE-END, None -

Interval Type 100~1200,1000~3000 ms - Enumeration Ty NO, YES YES,NO None - Enumeration Ty D1, D2, D3, D4, D5, D6 D1,D2,D3,D4,D5,D6,D7, None - Enumeration Ty OFF, ON OFF, ON None -

UNI: 1000~3000NNI: 100~1200

Interval Type 1~65533,65535 {1~65533}, {65535} None

-

Interval Type -90000000~90000000 -90000000 to 90000000 None - String Type - -90:00:00.000~90:00:00.0 None - Interval Type 1~100 100~10000 step:100 ms 2 Interval Type 0~100 0~100 None 4 Interval Type 0~10000 0~10000 ms 25 Interval Type 0~15 0~15 None 3 Interval Type 0~15 0~15 None 8 Enumeration Ty UNI, IMA, FRAATM, UNI, IMA, FRAATM, N None -


Enumeration Ty UserNumber, Power Power, UserNumber None


Interval Type 0~100 0~100 per cent Interval Type 0~100 0~100 per cent - Interval Type 0~100 0~100 per cent -

Enumeration Ty ON, OFF ON, OFF None

Enumeration Ty ON, OFF ON, OFF None Interval Type 0~100 0~100 per cent -

-(SET DRD) UserNumber(ADD CELLDRD)





Bit Field Type NODEB_CREDIT_LDR NODEB_CREDIT_LDR_ None - Enumeration Ty FALSE(FALSE), TRUE FALSE, TRUE None FALSE Interval Type 0~100 0~1, step:0.01 per cent 13 Enumeration Ty IUBLDR(Iub load reshuf IUBLDR,CODELDR,UU None - Enumeration Ty IUBLDR(Iub load reshuf IUBLDR,CODELDR,UU None -


Enumeration Ty IUBLDR(Iub load reshuf IUBLDR,CODELDR,UU None - Enumeration Ty IUBLDR(Iub load reshuf IUBLDR,CODELDR,UU None -

Interval Type 1~63 1~63 None - Interval Type 0~63 0~63 None - Interval Type 0~63 0~63 None - Interval Type 0~63 0~63 None -


-

Interval Type 0~7 0 to 7 None 0 Enumeration Ty ON, OFF ON,OFF None - Interval Type 0~31 0 to 31 None - Enumeration Ty UCP, RUCP, UUP, ATM UCP,RUCP,UUP,ATM,IP None -

Enumeration Ty UCP, RUCP, UUP, ATM UCP,RUCP,UUP,ATM,IP None - Enumeration Ty ATM, IP ATM,IP None - Interval Type 0~83 0 to 83 None - Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,256 None - Enumeration Ty D0, D8, D16, D32, D64 0, 8, 16, 32, 64, 128, 144, kbit/s - String Type - 0~9Characters None -

Enumeration Ty B8ZS(B8ZS), HDB3(H B8ZS, HDB3, AMI, AMI None -


-

Enumeration Ty M3UA_MASTER_MOD None M3UA_MASTE

Enumeration Ty B0000, B0001, B0010, B0000, B0001, B0010, B0 NoneB1111

Enumeration Ty E1_DOUBLE_FRAME( E1_DOUBLE_FRAME, None -

Enumeration Ty SAALLNK, AAL2PATH SAALLNK, AAL2PATH, None

-

M3UA_MASTER_MOD, M3UA_SLAVE_MOD(For definitions of the two modes, refer to RFC4666.)

IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - None None -


-

IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 1024~65535 1024~65535 None - Enumeration Ty LFB(Load from BAM and LFB,CL None - Enumeration Ty NO, YES NO, YES None - Interval Type 0~119 0~119 None - Interval Type 14~27 14~27 None - Interval Type -180000000~180000000 -180000000 to 180000000 None - String Type - -180:00:00.000~180:00:0 None -

Enumeration Ty NO_LOOP(No loop), R NO_LOOP, REMOTE_L None

-

Interval Type 0~100 0~100 None 1 Interval Type 0~3 0 to 3 None -


-

Interval Type 0~447 None - Interval Type 14~27 14~27 None - Enumeration Ty Hub, Leaf Hub, Leaf None -

Enumeration Ty ALL(Select all links), ALL, SINGLE None

-

Interval Type 14~27 14 to 27 None - Interval Type 0~5 0 to 5 None - Interval Type 0~167 0 to 167 None - Interval Type 32~65535 32 to 65535 None - Interval Type 0~255 0 to 255 None - Interval Type 1024~65535 1024~65535 None - Interval Type 0~2 0~2 None - Enumeration Ty D1, D4, D5, D8, D10, D 1,4,5,8,10,16,20 None - Enumeration Ty D1, D2, D4, D8, D16, 1,2,4,8,16,32,64,128,25 None - Interval Type 4~1504 4~1504 byte - Interval Type 4~1504 4~1504 byte -


-

Enumeration Ty SAAL(SAAL Link Type SAAL, SCTP NoneSAAL


AEUa (0~191) 0~127 is Leaf logical port,128~191 is Hub logical port.AOUa (0~383) 0~255 is Leaf logical port,256~383 is Hub logical port.UOIa (0~447) 0~383 is Leaf logical port,384~447 is Hub logical port.

Bit Field Type MAP_HSUPA_TTI_2M MAP_HSUPA_TTI_2MS None - Enumeration Ty B1, B2, B3, B4, B5, B6, B1,B2, B3,B4, B5,B6, B7 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None -

Interval Type -50~33 -50~33 dBm Enumeration Ty TRUE(Configure the ma TRUE,FALSE None FALSE

24(ADD CELLSELRESEL) -(ADD NRNCCELL)

Interval Type 1~100000 1~100000 m -

Interval Type 3~328080 3~328080 m - Interval Type 0~254 0~254 None 10 Interval Type 0~3 {0~3} None 1 Interval Type 0~3 {0~3} None 1

Interval Type 0~256000000 0~256000000 bit/s-

Interval Type 1~1000 64~64000 step:64 kbit/s -


Interval Type 0~255 0~255 None - Interval Type 4~8 4~8 None 4

Interval Type 1~6 1~6 None Enumeration Ty D0, D1, D2, D3, D4, D5 0, 1,..., 15 None D15 Interval Type 0~49 -24.5~0, step: 0.5 dB - Interval Type 1~4 1~4 None - Interval Type 0~15 0~15 None - Interval Type 0~48 0~48 None 48 Interval Type -350~150 -35~15, step: 0.1 dB 10 Interval Type 24~1031 24~1031 byte 270 Interval Type 4~16 4~16 None - Interval Type 0~100 0~100 None 64 Interval Type 0~100 0~100 None 20



Interval Type 1~1500 1 to 1500 byte 256 Interval Type 1~1500 1 to 1500 byte - Interval Type 1~6 1~6 None 1 Interval Type 0~10 0~10 None 0 Interval Type 0~254 0~254 None 5 Interval Type -100~500 -10~50, step: 0.1 dBm 346

Interval Type 25~50,250~500 None -

Interval Type 1~60 1~60 s - Interval Type 1~1500 1 to 1500 byte 64

Interval Type 1~1500 1 to 1500 byte - Interval Type 0~100 0~1, step:0.01 per cent 75 Interval Type 1~24 1 to 24 h 12

Interval Type 0~500 0~50, step: 0.1 dBm430

Interval Type -50~33 -50~33 dBm 24 Interval Type -50~33 -50~33 dBm 24

UNI: 25~50NNI: 250~500

Interval Type -50~33 -50~33 dBm 24 Interval Type -50~33 -50~33 dBm 24 Interval Type 1~3 1~3 None 1 Enumeration Ty FALSE(Do not end), T FALSE,TRUE None FALSE Enumeration Ty FALSE(Do not end), T FALSE,TRUE None FALSE Interval Type 0~15 0~15 None 0 Interval Type 0~15 0~15 None 0 Interval Type 0~31 0 to 31 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 14~27 14 to 27 None - Interval Type 0~5 0 to 5 None - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~100 0~100 per cent 100 Enumeration Ty COMMON, MCCH COMMON, MCCH None COMMON Interval Type 1~15 1~15 None 1 Interval Type 1~10 1~10 min - Enumeration Ty OFF(OFF), ON(ON) OFF, ON None - String Type - 000~999 None - String Type - 000~999 None - Enumeration Ty FALSE, TRUE FALSE,TRUE None TRUE Interval Type 0~8 0~8 None 1 Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s -


-

Interval Type 0~16777215 0~16777215 None - Enumeration Ty OFF(OFF), ON(ON) OFF, ON None - Interval Type 0~3264000 0 to 3264000 kbit/s -

Enumeration Ty PTM, PTP, ENHANCE PTM, PTP, ENHANCED None

PTM(ADD SAMBMSPARA,ADD CELLMBMSPARA) -(SET RNCMBMSPARA)

Interval Type 3~10000 3 to 10000 byte -

String Type - 000~999 None

-

String Type - 000~999 None - Interval Type 4,8 4(Use two bytes to presen None - Interval Type 30~70754 30 to 70754 None -



Enumeration Ty CPICH_EC/NO(CPICH CPICH_EC/NO,CPICH_ None



Enumeration Ty LocalMep, RemoteMep None - Enumeration Ty LONG, SHORT LONG(Long sequence num None LONG Interval Type 0~255 0~255 None - Interval Type -10~5 -10~5 dB -7 Enumeration Ty FALSE(Not Use), TRUE FALSE, TRUE None FALSE Interval Type 1~1000 64~64000 step:64 kbit/s - Enumeration Ty D0, D1, D2, D3, D4, D5 0, 1,..., 15 None D14 Enumeration Ty SF4, SF8, SF16, SF32, SF4, SF8, SF16, SF32, S None SF8 Interval Type 0~49 -24.5~0, step: 0.5 dB -

AUTO(ADD CELLINTERRATHOCOV) -(SET INTERRATHOCOV)

LocalMep,RemoteMep

Interval Type 1~60 1~60 min

-


-


-

Interval Type 1~60 1~60 min-




Interval Type 1~60 1~60 min -




-

Interval Type 1~32 1 to 32 None 1

Interval Type -100~500 -10~50, step: 0.1 dBm 313 Interval Type 10~1000 10 to 1000 ms 30 Interval Type 10~1000 10 to 1000 ms 30 Enumeration Ty SF4, SF8, SF16, SF32, SF4, SF8, SF16, SF32, S None SF4 Interval Type 1~32 1~32 None 8

String Type - 00~99,000~999 None

-

String Type - 00~99,000~999 None -

Bit Field Type COMM_MOCN_NRI_GL None - Enumeration Ty NO, YES NO,YES None - Enumeration Ty MODE1(1:1 Backup), M MODE1, MODE2, MODE None - Enumeration Ty MANUAL, AUTO MANUAL, AUTO None - Enumeration Ty PRIMARY, STANDBY, PRIMARY,STANDBY,I None -

Enumeration Ty SERVER, CLIENT SERVER, CLIENT None - Enumeration Ty OFF, ON OFF,ON None -

COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH, COMM_MIB_MULTI_PLMN_LIST_ALLOWED_SWITCH, SPARE_1_SWITCH, SPARE_2_SWITCH, SPARE_3_SWITCH, SPARE_4_SWITCH,

SPARE_5_SWITCH, SPARE_6_SWITCH

Interval Type 5000~30000 5000~30000 ms - Interval Type 5000~30000 5000~30000 ms - Interval Type 40~60000 40~60000 ms 1000 Interval Type 1~65535 1~65535 s - IP Address Typ - 0.0.0.0~255.255.255.255 None -


-

Enumeration Ty MPS_EMERGENCY, M MPS_NORMAL, MPS_E None MPS_NEUTRAL Enumeration Ty MLPPP, MCPPP MLPPP(MLPPP group),M None MCPPP Interval Type 0,2,4,8,10 0,2,4,8,10 None - Enumeration Ty D12, D16, D20, D24, D 12, 16, 20, 24, 28, 32, 64 s -

Enumeration Ty OFF, ON OFF,ON None - Enumeration Ty OFF, ON For each switch of this p None -

Bit Field Type TRAFFIC_AMR, TRAF 1, 2, 4, 8 None - Enumeration Ty OFF(OFF), ON(ON) OFF, ON None - Enumeration Ty OFF(OFF), ON(ON) OFF, ON None - Any Type - 1~100 characters None - Enumeration Ty OFF(Message is invalid) OFF,ON None OFF Enumeration Ty CLEAR(Cleared), LOP(Loc CLEAR,LOP,FS,MS,EXE None -



Interval Type 0~100 0~1, step: 0.01 per cent

Interval Type 0~100 0~1, step: 0.01 per cent Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256 kbit/s - Enumeration Ty True, False TRUE, FALSE None -


80(ADD CELLMBMSFACH) -(SET MBMSFACH)

50(ADD CELLMBMSFACH) -(SET MBMSFACH)


Enumeration Ty MET(MET), IMP(IMP) MET, IMP None MET Enumeration Ty MET(MET), IMP(IMP) 0~1 None -

Interval Type 256~1500 256 to 1500 byte

Interval Type 1~1500 1 to 1500 ls

-(SET ETHPORT) 1500(ADD SCTPLNK)

1000(ADD PPPLNK) -(ADD MPGRP)

Interval Type 1~16 1~16 None - Interval Type 10~2000 10~2000 None 100 Interval Type 0~7 0~7 None - Interval Type 0~7 0~7 None - Interval Type 0~7 0~7 None - Interval Type 1~8 1~8 None -

Enumeration Ty D1, D2, D4, D10, D20, D1, D2, D4, D10, D20, D None-

Enumeration Ty D1, D2, D4, D10, D20, D1, D2, D4, D10, D20, D None - Enumeration Ty D1, D2, D4, D10, D20, D1, D2, D4, D10, D20, D None - Enumeration Ty D1, D2, D3, D4 D1,D2,D3,D4 None -


-

Interval Type 0~50 0~50 frame 0

Interval Type 0~50 0~50 frame 0 Interval Type 1~200 1~200 None - Interval Type 1024~65535 1024~65535 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 1~200 1~200 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - String Type - 1 to 30 characters None - String Type - 1 to 30 characters None -

Bit Field Type CRD_ADCTRL, HSDP CRD_ADCTRL,HSDPA None - Enumeration Ty ALGORITHM_OFF, A ALGORITHM_OFF,ALG None -

Bit Field Type INTRA_FREQUENCY_L INTRA_FREQUENCY_L None -

Enumeration Ty NBM_LDC_ALL_UE(Select None NBM_LDC_MA Enumeration Ty ALGORITHM_REQUIR ALGORITHM_REQUIR None ALGORITHM_D Enumeration Ty ALGORITHM_OFF, A ALGORITHM_OFF,ALG None - Bit Field Type PRIORITY1, PRIORITY PRIORITY1, PRIORITY2 None - Enumeration Ty ALGORITHM_OFF(WPS ALGORITHM_OFF, AL None - Interval Type 1~200 1~200 None - Enumeration Ty ATMTRANS_IP, IPTR ATMTRANS_IP, IPTRA None - Interval Type 0~7 0~7 None -


-


NBM_LDC_ALL_UE,NBM_LDC_MATCH_UE_ONLY, NBM_LDC_MATCH_UE_FIRST


-

Enumeration Ty NC0, NC1, NC2, RESE NC0,NC1,NC2,RESET None NC0

Interval Type 2~10 2~10 None Enumeration Ty OFF, ON OFF, ON None - Interval Type 1~16 1~16 None 8 Enumeration Ty NO(NO_DIRECT_CONN NO, YES None DIRECT_CONN


-

IP Address Typ - 0.0.0.0 to 255.255.255.25 None -

Interval Type 1~16 1~16 None Enumeration Ty INT, INTB, NAT, NAT International Network Co None - Interval Type 1~256 1~256 None 5 Enumeration Ty MODE1, MODE2 MODE1,MODE2 None MODE2 Interval Type 0~60 0~60 s -

4(ADD SAMBMSPARA,ADD CELLMBMSPARA) -(SET RNCMBMSPARA)

15(ADD CELLHCSHO) -(SET HCSHO)

Interval Type 0 0 None - Interval Type 0~3840 0~3840 None 3840 Interval Type 0~3840 0~3840 None 3840




-

Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~3 0 to 3 None -

Bit Field Type IUB_LDR, NODEB_CR IUB_LDR, NODEB_CRE None - String Type - 1 to 64 characters None -


-

Enumeration Ty R99, R4, R5, R6, R7 R99, R4, R5, R6, R7 None R7 Interval Type 1~60 1 to 60 min 30 Enumeration Ty PERIOD, EVENT PERIOD,EVENT None PERIOD Interval Type 0~1,12~15,22~23 0 to 1,12 to 15,22 to 23 None - Interval Type 0~2 0 to 2 None - Enumeration Ty BASE_BOARD, CH_ST BASE_BOARD,CH_STM None - Enumeration Ty NORMAL(Normal), PICO NORMAL, PICO_TYPE1, None NORMAL Interval Type 1~288 5~1440, step:5 min - Compound Typ hour, min, sec 00:00:00~23:59:59 s - Enumeration Ty IUB, IUR, IUCS, IU IUB, IUR, IUCS, IUP None - Enumeration Ty PICO_TYPE1, PICO_T PICO_TYPE1, PICO_TY None - Enumeration Ty CONFIGURED, NOT_ CONFIGURED, NOT_C None NOT_CONFIGU Interval Type 0~100 0~1, step:0.01 per cent 0 Interval Type 1~256 1~256 None 50


-


Enumeration Ty FALSE, TRUE FALSE,TRUE None

FALSE

Interval Type 1~5 1~5 None Interval Type 0~1023 0~1023 None -


-

Any Type - ATM address None -

3(ADD SAMBMSPARA,ADD CELLMBMSPARA) -(SET RNCMBMSPARA)

Any Type - None None

-

Interval Type 1~16 1~16 None Interval Type 0~1023 0~1023 None - Interval Type 1~16 1~16 None -

Interval Type 0~100 0%~100% per cent


0(ADD IPLOGICPORT,ADD MPGRP,ADD PPPLNK) -(SET ETHPORT)

Interval Type 0~63 0 to 63 None - Enumeration Ty OFF, ON OFF,ON None - Interval Type -20~20 -20~20 dB 4 Interval Type -20~20 -20~20 dB -4 Interval Type -20~20 -20~20 dB 4 Interval Type -20~20 -20~20 dB -4 Interval Type -10~10 -20~20,step:2 dB 2 Interval Type -10~10 -20~20, step:2 dB -2

Interval Type 100~86400000 100~86400000 ms

-

Enumeration Ty PRIM(Primary Operator PRIM,SEC,OUTER,CO None - Enumeration Ty TRCH_DCH, TRCH_H TRCH_DCH, TRCH_HS None -

Enumeration Ty MAP_MODE_LUCENT MAP_MODE_LUCENT, None - Bit Field Type R5_PosData_SWITCH, R5_PosData_SWITCH, L None - Enumeration Ty SDH, SONET SDH, SONET None - Interval Type 0~179 0~179 degree - Enumeration Ty One_touch(For all the s One_touch (for all the su None Step_by_Step Enumeration Ty INACTIVE, ACTIVE INACTIVE, ACTIVE None ACTIVE Enumeration Ty UE_BASED, UE_ASSI UE_BASED, UE_ASSIS None - Enumeration Ty FORBIDDEN, NOT_F FORBIDDEN,NOT_FOR None NOT_FORBIDD Enumeration Ty PEER, LOCAL PEER, LOCAL None LOCAL Enumeration Ty NO(ATM_ADDRESS_D NO,YES None YES Enumeration Ty ENABLED, DISABLED ENABLED, DISABLED None DISABLED Interval Type 1~4294967295 1 to 4294967295 None -


-


-

Enumeration Ty QOS, BE, AF11, AF12 QOS, BE, AF11, AF12, None - Enumeration Ty NP, DSP NP,DSP None - Interval Type -350~150 -35~15, setp: 0.1 dB -20

Interval Type -100~500 -10~50, step: 0.1 dBm330

Interval Type 0~100 0~10, step:0.1 dB 2


Bit Field Type PC_AMR_MODE_INDU PC_AMR_MODE_INDUC None - Interval Type 1~10 1~10 s 5

Enumeration Ty 10, 20, 50, 100, 200, 50 10,20,50,100,200,500,100 ms 1000

Interval Type 64~1024 64 to 1025 byte 128


IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - None None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - None None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None -

Enumeration Ty INVALID(Invalid), VAL Valid, Invalid NoneInvalid

IP Address Typ - 0.0.0.0~255.255.255.255 None 255.255.255.255 Interval Type 0~65535 0~65535 None - Interval Type 1024~65535 1024~65535 None - Interval Type 0~4095 0~4095 None - Enumeration Ty IUB, IUPS, OTHER IUB, IUPS, OTHER None -

Interval Type 0~65535 0~65535 s 30

Interval Type 0~65535 0~65535 s 30

Interval Type 0~65535 0~65535 s -

Interval Type 0~65535 0~65535 s -

Interval Type 0~300 0~300 s 30 Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms D4000 Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms D4000

Interval Type 0~1000 0~1000 None 1 Interval Type 0~1000 0~1000 None 1 Interval Type 1~60 1~60 s 5

Interval Type 1~64 500~32000,Step:500 ms




Enumeration Ty D1, D2, D4, D8, D16, 1, 2, 4, 8, 16, 32, 64, IN None





D16(ADD CELLINTRAFREQHO) -(SET INTRAFREQHO)




Enumeration Ty D0.9, D0.8, D0.7, D0.6, 0.9, 0.8, 0.7, 0.6, 0.5, 0.4, None -

Enumeration Ty Disable, Enable Disable(Not support Proto None

Enable

Bit Field Type BE, AF11, AF12, AF13, BE,AF11,AF12,AF13,AF None - Enumeration Ty BE, AF11, AF12, AF13, BE AF11 AF12 AF13 AF None -



Interval Type 0~255 0~255 None Interval Type 1~255 1~255 None - Interval Type 0~255 0~255 None 10 Enumeration Ty V18, V36, V72, V144 18, 36, 72, 144 None V36 Interval Type -10~5 -10~5 dB -7 Interval Type 14~27 14 to 27 None - Interval Type 5~64 5 to 64 None 10 Interval Type 64~1024 64 to 1024 byte 128 Interval Type 10~1500 10 to 1500 byte 128 Interval Type 20~1024 20 to 1024 byte 56 Interval Type 95~512 95 to 512 byte 128

-(ADD FACH,ADD PICH,ADD PCH,ADD SCCPCHTFC,ADD SCCPCHBASIC) 3(ADD PCCPCH) 6(ADD AICH) 4(ADD PRACHBASIC,ADD PRACHTFC,ADD PRACHASC,ADD PRACHSLOTFORMAT,ADD PRACHACTOASCMAP,ADD RACH) 2(ADD PCPICH) 0(ADD PSCH) 1(ADD SSCH)


-


-

Interval Type 1~100 100~10000 ms 10 Interval Type 0~1000 0~1000 per mill 30 Interval Type 1~100 100 to 10000 ms 1 Interval Type 0~7 FG2a board: 0 to 7, GOUa None - Interval Type 0,2,4,6,8 0,2,4,6,8 None - Interval Type 0~7 0 to 7 None - Interval Type 0~7 0 to 7 None - Interval Type 0~7 0 to 7 None - Interval Type 0~7 For the FG2a board, the va None - Interval Type 1~32 1 to 32 None - String Type - 0 to 250 characters None - String Type - 1 to 250 characters None -

Interval Type 1~80 10~800 ms -

Interval Type 50~10000 ms - Interval Type 21~65535 21~65535 None - Enumeration Ty IP, ATM IP, ATM None - Enumeration Ty ETHER, TRUNK ETHER,TRUNK None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Interval Type -5~10 -5~10 dB - Interval Type 1~8 1~8 dB 2 IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 0~3 0~3 None -

Interval Type 0~167 UOIa(0~3), POUa(0~167) None

-

Enumeration Ty Disable, Enable Disable(Not support PPP None

Enable

Interval Type 0~5 0 to 5 None - Interval Type 0~255 0~255 None 4

UNI: 500~10000NNI: 90~500

Enumeration Ty NON_PERIODIC_REPORT NON_PERIODIC_REPORT,2 ms Enumeration Ty NON_PERIODIC_REPORT NON_PERIODIC_REPORT,2 ms D500 Interval Type 1~64 1~64 None 20 Bit Field Type SIGNATURE0, SIGNA SIGNATURE0, SIGNATU None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty HIGH, LOW HIGH, LOW None -


0


0

Enumeration Ty HIGH(High priority), HIGH, NORMAL, LOW None HIGH Enumeration Ty ARP, TrafficClass ARP,TrafficClass None - Interval Type 0~7 0~7 None 1 Interval Type 0~7 0~7 None 1 Interval Type 0~7 0~7 None 1 Interval Type 0~7 0~7 None 1 Interval Type 0~7 0~7 None 1 Interval Type 2~30 2~30 min -

D500(ADD CELLINTERFREQHOCOV) -(SET INTERFREQHOCOV)

Bit Field Type INVOKE_TRACE_SWI This parameter is set to 0 None -

Enumeration Ty ITUT, ANSI, TTC ITUT, ANSI, TTC None ITUT Interval Type 0~60 0~60 s - Interval Type 0~60 0~60 s - Interval Type 0~60 0~60 s - Interval Type 0~60 0~60 s -

Interval Type 0~60 0~60 s -

Enumeration Ty ALL(Select all ports), ALL,SINGLE None - Enumeration Ty CORRM_SRNSR_PSBE CORRM_SRNSR_PSBE_ None CORRM_SRNSR Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 per cent 100 Interval Type -350~150 -35~15, step: 0.1 dB -50 Interval Type 0~100 0~100 per cent 70 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 70


-

Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100

Interval Type 0~100 0~100% per cent Interval Type 0~14400 0~14400 s - Interval Type 0~14400 0~14400 s - Interval Type 0~64800 0~64800 s - Interval Type 0~14400 0~14400 s -


Interval Type 0~14400 0~14400 s - Enumeration Ty OFF, ON OFF, ON None - Interval Type 60~900 60~900 s - Interval Type 0~100 0~100 per cent 100 Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Interval Type 0~100 0~100 None 30 Interval Type 0~100 0~100 None 100 Enumeration Ty SUPP_NONE, SUPP_I SUPP_NONE,SUPP_IU None - Interval Type 1~10 1~10 None - Interval Type 0~100 0~100 None - Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None - Interval Type 0~65534 0~65534 None - Enumeration Ty FALSE, TRUE FALSE,TRUE None - Enumeration Ty ON, OFF ON,OFF None OFF Interval Type 0~100 0~100 per cent 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 100

Bit Field Type PS_BE_EXTRA_LOW_ PS_BE_EXTRA_LOW_R None - Interval Type 0~3264000 0 to 3264000 kbit/s - Enumeration Ty BOOL(Digital Port), V BOOL,VALUE None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Enumeration Ty ON, OFF ON, OFF None - Enumeration Ty ON, OFF ON, OFF None - Enumeration Ty ON, OFF ON, OFF None - Enumeration Ty FE, GE FE, GE None -



Interval Type 0~60 0~60 s - Enumeration Ty ALGORITHM1, ALGO ALGORITHM1, ALGOR None - Interval Type 0~63 0 to 63 None - Interval Type 0~63 0 to 63 None - Interval Type 0~63 0 to 63 None - Interval Type 0~63 0 to 63 None - Interval Type 0~63 0 to 63 None -

Enumeration Ty CS1, CS2 CS1, CS2 None CS2


20

Interval Type 0~40,255 {0~40},{255} dB 255 Interval Type 0~40,255 {0~40},{255} dB 255 Interval Type 0~40,255 {0~40},{255} dB 255 Interval Type 0~40,255 {0~40},{255} dB 255 Interval Type -50~50 -50~50 dB 0

Interval Type -24~0 -24~0 dB Enumeration Ty TRUE(Configure the min TRUE,FALSE None FALSE Interval Type -58~-13 -115~-25,Step:2 dBm -50

Interval Type -58~-13 -115~-25, step:2 dBm

Enumeration Ty TRUE, FALSE TRUE,FALSE None

FALSE

Enumeration Ty TRUE(Configure the mini TRUE,FALSE None FALSE Enumeration Ty CPICH_ECNO(CPICH E CPICH_ECNO, CPICH_ None CPICH_ECNO Enumeration Ty OFF, ON OFF, ON None - Interval Type 5~20 5~20 None -

-18(ADD CELLSELRESEL) -(ADD NRNCCELL)

-58(ADD CELLSELRESEL) -(ADD NRNCCELL)


-

Interval Type 1~65535 1~65535 s -


-

Bit Field Type SUBCHANEL0, SUBC SUBCHANEL0, SUBCHA None - Interval Type 10000~240000 10000~240000 ms - Enumeration Ty NO, YES NO,YES None - Enumeration Ty NO_CAPABILITY(Cell NO_CAPABILITY,GSM, None - Interval Type 0~240000 0~240000 ms -

Interval Type 1~256 1~256 None Interval Type 1~65535 1~65535 ms 5000 Interval Type 1~99 0.01~0.99, step:0.01 per cent 68 Interval Type 1~65535 1~65535 ms 3000

String Type - 0 to 250 characters None-

Enumeration Ty LASTRBP(last rollbackp LASTRBP,APPOINTRBP None - Interval Type 300~10000 300~10000 ms - Interval Type 300~10000 300~10000 ms - Interval Type 300~10000 300~10000 ms - Interval Type 0~100 0~100 per cent 96 Interval Type 1~360 10~3600, step: 10 s - Interval Type 100~200 1~2, step:0.01 per cent 130

Interval Type 20~99 20~99 per cent 30 Enumeration Ty YES, NO YES, NO None -

Enumeration Ty Band1, Band2, Band3, Band1, Band2, Band3, B None

230(ADD PCH,ADD FACH) 1(ADD RACH)

-(ADD CELLREDIRECTION,SET REDIRECTION,SET DRD) DependOnNCell(ADD CELLDRD)


-


-

Enumeration Ty OFF, ONLY_TO_INT OFF,ONLY_TO_INTER None

-


-


-

Enumeration Ty TRUE, FALSE TRUE, FALSE None

-

Interval Type 0~31 0 to 31 None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty OFF, ON OFF, ON None - Enumeration Ty OFF, ON OFF,ON None - Enumeration Ty REHOSTRIGHNOW(Reho RehostRighNow, RehostD None - Interval Type 2000~60000 2000~60000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~20000 1~20000 ms - Interval Type 1~20000 1~20000 ms -

Interval Type 1~20000 1~20000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~60000 1~60000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~20000 1~20000 ms - Interval Type 2000~60000 2000~60000 ms -

Interval Type -29~29 -14.5~14.5,Step:0.5 dB -

String Type - 1 to 250 characters None

-

String Type - 1~31 characters None-

Interval Type 0~65535 0~65535 None - Interval Type 1~4096 1~4096 s -

Enumeration Ty NON_PERIODIC_REPOR NON_PERIODIC_REPORT, 2 ms

Enumeration Ty NON_PERIODIC_REPOR NON_PERIODIC_REPORT, 2 ms



Enumeration Ty NON_PERIODIC_REPOR NON_PERIODIC_REPORT, 2 ms Enumeration Ty GSM, GPRS, EDGE GSM, GPRS, EDGE None - Bit Field Type RESERVED_SWITCH_0 RESERVED_SWITCH_0_ None - Bit Field Type RESERVED_SWITCH_1 RESERVED_SWITCH_1_ None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~255 0~255 None - Interval Type 0~255 0~255 None - Interval Type 2000~60000 2000~60000 ms -

Interval Type 2~5 2 to 5 s

3

Interval Type 0~10 0~10 None 1 Bit Field Type SRB_OVER_HSDPA, S None None - Enumeration Ty AM, UM, TM AM, UM, TM None -

Interval Type 0~4992 0~4992 bit-

Interval Type -350~150 -35~15, step:0.1 dB - Interval Type -350~150 -35~15, step:0.1 dB - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 0~4095 0~4095 None - Interval Type 0~4095 0~4095 None -



-


-

IP Address Typ - 0.0.0.0~255.255.255.255 None - Enumeration Ty R99, R4, R5, R6, R7 R99, R4, R5, R6, R7 None -

Interval Type 20~99 20~99 per cent 20 Enumeration Ty ORIGCONVCALLEST, ORIGCONVCALLEST, None - Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None - Interval Type 0~15 0~15 s - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms -

Interval Type 1~10000 1~10000 ms - Interval Type 1~5000 1~5000 ms - Interval Type 1~3000 1~3000 ms - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Enumeration Ty NO, YES NO, YES None - Interval Type 0~119 0~119 None - Interval Type 0~119 0~119 None -

Enumeration Ty SHARE, EXCLUSIVE SHARE, EXCLUSIVE None

-

Enumeration Ty SHARE, EXCLUSIVE SHARE, EXCLUSIVE None - Enumeration Ty SHARE(Share), EXCLUS SHARE, EXCLUSIVE None SHARE Enumeration Ty COMMISSIONING(Commi COMMISSIONING,UPG None -

Interval Type 1200~20000 ms -

Enumeration Ty ALL_NODES, BY_CNI ALL_NODES,BY_CNID None - Enumeration Ty OFF, ON OFF, ON None OFF Interval Type 0~5 0~5 None - Enumeration Ty ALL_RNC, SINGLE_R ALL_RNC,SINGLE_RNC None - Bit Field Type RsvdBit1_BIT1, RsvdBi This parameter is set to 0 None - Bit Field Type RsvdBit1_BIT1, RsvdBi Each bit can be set ON o None - Bit Field Type RsvdBit1_BIT1, RsvdBi Each bit can be set ON o None - Enumeration Ty OFF, ON ON,OFF None -

UNI: 5000~20000NNI: 1200~20000

Bit Field Type RsvdBit1, RsvdBit2, Rs RsvdBit1, RsvdBit2, Rsvd None

-

Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0 to 4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0~4294967295 None 0 Interval Type 0~4294967295 0~4294967295 None 0 Enumeration Ty OFF, ON ON,OFF None -

Interval Type 0~4294967295 0~4294967295 None Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty OFF, ON ON,OFF None -

0(ADD NODEBALGOPARA,ADD CELLALGOSWITCH) -(SET CACALGOSWITCH)

Interval Type 0~4294967295 0~4294967295 None Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty OFF, ON ON,OFF None - Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty OFF, ON ON,OFF None - Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty OFF, ON ON,OFF None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0 to 4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0 to 4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Interval Type 0~4294967295 0 to 4294967295 None - Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty NON-REVERTIVE, RE NON-REVERTIVE, REV None -

Interval Type 0~4294967295 0~4294967295 None4294967295

Interval Type 1~5 1~5 None - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Enumeration Ty OFF, ON OFF,ON None - IP Address Typ - 0.0.0.0 to 255.255.255.25 None - IP Address Typ - 0.0.0.0 to 255.255.255.25 None - Interval Type 1~65535 1~65535 s - Interval Type 1~65535 1~65535 s - Enumeration Ty D250, D500, D1000, D2 250, 500, 1000, 2000, 40 ms - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 256, 5 byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms -

0(ADD NODEBALGOPARA,ADD CELLALGOSWITCH) -(SET CACALGOSWITCH)




Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256, 512, byte - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Interval Type 0~100 0~100 per cent 12 Interval Type 0~100 0~100 per cent 25 Interval Type 1000~60000 1000~60000 ms 1000 Interval Type 1000~60000 1000~60000 ms 3000 Interval Type 1000~60000 1000~60000 ms 1000 Interval Type 0~4294967295 0~4294967295 None -

Interval Type 0~1000 0~1000 kbit/s 5 Interval Type 1~100 100~10000 ms 5 Interval Type 10~2810 530~148930 kbit/s - Interval Type 1~3000000 1~3000000 kbit/s - Interval Type 0~4000000 0~4000000 kbit/s -


-

Interval Type 768~1280 768~1280 chip -

Interval Type 768~1280 768~1280 chip - Interval Type 0~699 0 to 699 None -


-

Enumeration Ty UNI, NNI UNI, NNI None - Interval Type 35000~120000 35000~120000 ms -


-

Enumeration Ty TRUE(True), FALSE(Fal TRUE, FALSE None FALSE Interval Type 0~149 0~38144,step:256 chip 50 Enumeration Ty ByRack, ByNodeBId, By ByRack,ByNodeBId,ByCe None -

Interval Type 30~70754 30 to 70754 None - Interval Type 0~15 0~15 None -

Enumeration Ty ON, OFF ON, OFF None

-


-

Interval Type 1~31 1 to 31 None - Enumeration Ty DISABLE, ENABLE DISABLE, ENABLE None - Enumeration Ty HIGH, LOW HIGH, LOW None - Interval Type 0~63 0~63 None - Enumeration Ty SINGLE(Single NodeB) SINGLE, ALL None ALL Enumeration Ty MBMS_REL(MBMS serv MBMS_REL, USER_REL None MBMS service

IP Address Typ - 0.0.0.0~255.255.255.255 None - String Type - 0 to 63 character None -

Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 256 kbit/s

-

Enumeration Ty ON, OFF ON, OFF None Interval Type 0~4294967295 0~4294967295 None - Enumeration Ty SUPPORT_CS, SUPPO SUPPORT_CS, SUPPOR None -

Enumeration Ty STREAMING, BACK STREAMING, BACKG None

-

Enumeration Ty NO, YES NO, YES None -


Interval Type 0~255 0~255 None - Enumeration Ty DEDICATED(Dedicate Dedicated, RANSharing None - Interval Type -53~45 -105~91, step:2 dB 0 Enumeration Ty HO_TO_GSM_SHOUL HO_TO_GSM_SHOULD None - Interval Type 0~63 0~63 None - Interval Type 0~120 0~120 s -


-24(ADD CELLINTRAFREQHO) -(SET SMLC,SET INTRAFREQHO)

Bit Field Type CS_SHO_SWITCH, H CS_SHO_SWITCH, HS None -

Enumeration Ty FALSE(Do not send), FALSE,TRUE None

TRUE

Enumeration Ty FALSE(Do not send), FALSE,TRUE None

FALSE

Bit Field Type SIB2, SIB4, SIB12, SIB SIB2, SIB4, SIB12, SIB1 None - Enumeration Ty FACH, DCH_3.4K_SI FACH, DCH_3.4K_SIG None -


-

Interval Type 0~15 0~15 None - Enumeration Ty FALSE, TRUE FALSE, TRUE None TRUE Interval Type 0~15 0~15 None -



Enumeration Ty NBAMR_BITRATE_4.7 4.75, 5.15, 5.90, 6.70, 7.4 kbit/s Enumeration Ty D3.4, D13.6, D27.2 D3.4, D13.6, D27.2 kbit/s - Enumeration Ty D3.4, D13.6, D27.2 D3.4, D13.6, D27.2 kbit/s - IP Address Typ - None None - Interval Type 0~100 0~100 per cent 15 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 15 Interval Type -16~10 -32~20, step:2 dB 0 Enumeration Ty D0, D1, D2, D3, D4, D5 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, None - Interval Type 0~3 0~3 None 0 Interval Type 0~3 0~3 None 1 Interval Type 0~3 0~3 None 2 Interval Type 0~3 0~3 None 3 Enumeration Ty D1, D2, D3, D4 D1, D2, D3, D4 None - Enumeration Ty B0000, B0001, B0010, B0000, B0001, B0010, B0 None B0000 Enumeration Ty DATE(Input with date) DATE, WEEK, DATEW None - Bit Field Type CELLID_CENTER, CE A-GPS, OTDOA, CELLI None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty JAN(January), FEB(Feb JAN, FEB, MAR, APR, None - Interval Type 14,16,18,20,22,24,26 14,16,18,20,22,24,26 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 0~5,8~27 0 to 5, 8 to 27 None - Interval Type 14~27 14 to 27 None -


Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 29,31 29,31 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None -


-

Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14~27 None - Interval Type 14~27 14 to 27 None - Interval Type 14~27 14~27 None -

Interval Type 0,2,4,8,10 0, 2, 4, 8, 10 None

-

Interval Type 14~27 14~27 None - Interval Type 0,2,4,8,10 0,2,4,8,10 None -

Interval Type 0,2,4,8,10 {0},{2},{4},{8},{10} None

-

Interval Type 0,2,4,8,10 0,2,4,8,10 None -

Interval Type 0,2,4,6,8,10 0~10, step: 2 None-


Enumeration Ty TRUE, FALSE TRUE,FALSE None - Enumeration Ty OFF, ON OFF, ON None -

Interval Type 1~16777215 None - Enumeration Ty BIT14, BIT16, BIT24 BIT14, BIT16, BIT24 None - String Type - 1~11 characters None - Enumeration Ty ON(ON), OFF(OFF) ON,OFF None OFF

Enumeration Ty WNF, DNF WNF, DNF NoneWNF

BIT14: 1~16383BIT16: 1~65535BIT24: 1~16777215

Enumeration Ty 10M, 100M 10M, 100M None - Interval Type 0~10,255 {0~1},{255}, step:0.1 None 255


-





Interval Type 0~100 0~1, step:0.01 per cent 45 Interval Type 40~100 40~100 per cent - Enumeration Ty DCH(UL_DCH,DL_DCH DCH, HSDPA, HSPA None - Enumeration Ty FALSE, TRUE FALSE, TRUE None - Interval Type 0~100 0~100 per cent 15 Interval Type 1~1000 1~1000 kbit/s 32 Interval Type 1~2000 1~2000 kbit/s 512 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 15 Interval Type 0~31 0 to 31 None -


-


IP Address Typ - 0.0.0.0~255.255.255.255 None -


-

Enumeration Ty BITS1-2MHZ, BITS2-2 BITS1-2MHZ, BITS2-2M None - Enumeration Ty TS1(Time_slot_1), TS2( TS1, TS2, TS3, TS4, TS5 None - Interval Type 45~90 45~90 min 60 Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None -

Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None -


-

Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0~5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0~5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0~5 None - Interval Type 0~5 0~5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None - Interval Type 0~5 0 to 5 None -

Interval Type 0~5 0~5 None - Interval Type 0~5 0~5 None -


-

Interval Type 0~5 0~5 None - Interval Type 0~5 0 to 5 None -



String Type - None None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty RT(Real time service), RT,NRT,ALL None - Interval Type 0~400 0~400 ms - Interval Type 1~255 1~255 s - Interval Type 1~100 1~100 s - Interval Type 1~255 1~255 s -

Bit Field Type SRNSR_DSCR_IUR_R SRNSR_DSCR_IUR_RE None - Interval Type 1~65535 1~65535 s - Interval Type 0~1048575 0~1048575 None - Enumeration Ty RSS, RBS RSS, RBS None - Interval Type -350~150 -35~15, step: 0.1 dB -50 Interval Type 20~99 20 to 99 per cent - Interval Type 30~100 30 to 100 per cent -

Enumeration Ty SPEECH, UNKNOWN SPEECH, UNKNOWN None -

Interval Type 20~99 20 to 99 per cent -

Interval Type 30~100 30 to 100 per cent - Interval Type -53~45 -105~91, step:2 dB 0 Interval Type -16~10,127 {-32~20},{127},step:2 dB 127 Interval Type 0~3 0~3 None - Interval Type 0~3 0 to 3 None -

Interval Type 0~3 0 to 3 None - Interval Type 0~3 0~3 None - Interval Type 0~3 0~3 None -


Compound Typ HOUR, MIN, SEC HOUR(hour),MIN(minute None - Enumeration Ty UBR, CBR, RTVBR, N UBR, CBR, RTVBR, NR None - Interval Type 1~512 1~512 None - Enumeration Ty INACTIVE, ACTIVE INACTIVE, ACTIVE None ACTIVE Compound Typ HOUR, MIN 00:00~23:59 min - Compound Typ HOUR, MIN 00:00~23:59 min - Compound Typ HOUR, MIN 00:00~23:59 min - Interval Type 1000~300000 1000~300000 ms - Interval Type 1~300 1~300 s 20 Interval Type 3~67 3~67 None 67 Enumeration Ty OFF, ON OFF, ON None OFF Enumeration Ty MANULSTP(Manual stop MANULSTP, AUTOSTP None - Enumeration Ty D0, D8, D16, D32, D64 D0, D8, D16, D32, D64, kbit/s - Interval Type 1~1000 1~1000 kbit/s 32 Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s - Interval Type 1~2000 1~2000 kbit/s 512 Enumeration Ty D0, D8, D16, D32, D64 D0, D8, D16, D32, D64, kbit/s -

Enumeration Ty TRUE, FALSE TRUE, FALSE None

Enumeration Ty STTD_Supported, STTD STTD_Supported, STTD_ None

FALSE(ADD CELLMBMSSCCPCH,ADD PICH,ADD AICH,ADD SCCPCHBASIC) -(SET MBMSSCCPCH)

STTD_not_Supported


-

Interval Type 16~1023 16~1023 byte 127 Interval Type 1~126,128~191 1 to 126,128 to 191 None - Enumeration Ty TRUE, FALSE TRUE, FALSE None FALSE Enumeration Ty FALSE, TRUE FALSE, TRUE None FALSE Enumeration Ty FALSE, TRUE FALSE,TRUE None FALSE

Enumeration Ty FALSE, TRUE FALSE, TRUE None FALSE Enumeration Ty NO, YES NO, YES None NO Enumeration Ty CR527_SUPPORT, CR CR527_SUPPORT, CR5 None - Enumeration Ty FALSE, TRUE FALSE,TRUE None FALSE Enumeration Ty FALSE, TRUE FALSE, TRUE None FALSE Enumeration Ty FALSE, TRUE FALSE,TRUE None FALSE Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - Enumeration Ty SUN(Sunday), MON(Mon SUN, MON, TUE, WED, None -

Enumeration Ty Close, Open Close,Open None-

Enumeration Ty OFF, ON OFF,ON None -

Enumeration Ty NO, YES NO, YES None YES Interval Type 1~254 1~254 None 10 Enumeration Ty OFF, ON OFF ON None OFF Interval Type 0~429496729 0~429496729 None 0 Enumeration Ty OFF, ON OFF ON None OFF Enumeration Ty OFF, ON OFF ON None OFF Enumeration Ty OFF, ON OFF ON None OFF Enumeration Ty OFF, ON OFF ON None OFF Enumeration Ty OFF, ON OFF ON None OFF Interval Type 0~429496729 0~429496729 None 0 Interval Type 0~429496729 0~429496729 None 0 Interval Type 0~429496729 0~429496729 None 0 Enumeration Ty FIRST(First), SECOND( FIRST, SECOND, THIR None - Interval Type 1~500 1~500 None - String Type - 1~250 character None - String Type - 1~250 character None - Interval Type 1~500 1~500 None - Interval Type 1~255 1~255 min - String Type - 1~250 character None - String Type - 1~250 character None - Interval Type 1~500 1~500 None - String Type - 1~250 character None - Interval Type 1~500 1~500 None - Interval Type 30000~60000 30000~60000 ms - Interval Type 800~1500 800~1500 ms - Interval Type 800~1500 800~1500 ms - Interval Type 2000~3000 2000~3000 ms - Interval Type 800~1500 800~1500 ms - Interval Type 800~1200 800~1200 ms - Interval Type 180000~360000 180000~360000 ms - Interval Type 180000~360000 180000~360000 ms - Interval Type 1400~2000 1400~2000 ms - Enumeration Ty D100, D200, D400, D60 D100, D200, D400, D600 ms - Enumeration Ty D100, D200, D400, D60 D100, D200, D400, D600 ms - Enumeration Ty D100, D200, D400, D10 D100, D200, D400, D100 ms - Enumeration Ty INFINITY, D5, D10, D3 INFINITY, D5, D10, D30 min - Enumeration Ty D5, D10, D15, D20, D30 D5, D10, D15, D20, D30, s - Enumeration Ty D40, D80, D160, D320 D40, D80, D160, D320 ms - Interval Type 1~8 1~8 s -


Interval Type 0~15 1~15 s - Enumeration Ty D0, D2, D4, D6, D8, D1 D0, D2, D4, D6, D8, D12 s - Enumeration Ty D0, D10, D30, D60, D1 D0, D10, D30, D60, D180 s - Enumeration Ty D0, D10, D20, D30, D4 D0, D10, D20, D30, D40 s - Interval Type 0~255 0~1530 step:6 min 10

Enumeration Ty D0, D100, D200, D300, D0,D100, D200,D300,D4 ms - Interval Type 800~1200 800~1200 ms - Interval Type 800~1200 800~1200 ms - Interval Type 800~1200 800~1200 ms - Interval Type 800~1200 800~1200 ms - Interval Type 1~1000 0.1%~100%, step: 0.1% per cent -



Interval Type 0~63 lower than -110,-110~-48(1 dBm


Interval Type 0~63 lower than -110,-110~-48(1 dBm Interval Type 1~12 1~12 None - Enumeration Ty D0, D1, D2, D3, D4 0, 1, 2, 3, 4 None -


-


Interval Type 0~512 0~512 None Interval Type 0~512 0~512 None 2

Enumeration Ty D1, D2, D3, D4, D5, D6 1, 2, 3, 4, 5, 6, 7, 8, 9, 1 None -


1(ADD PCHDYNTFS,ADD FACHDYNTFS) 2(ADD RACHDYNTFS)


Enumeration Ty D1, D2, D3, D4, D5, D6 1, 2, 3, 4, 5, 6, 7, 8, 9, 1 None - Interval Type 1~254 1~254 None 170

Enumeration Ty CHIP0, CHIP256, CHIP CHIP0, CHIP256, CHIP5 chip-

Interval Type 0~65535 0~65535 None - Interval Type 1~15 1~15 None 10 Enumeration Ty NOT_USED, D30, D60, NOT_USED, 30, 60, 120, s D60 Enumeration Ty NOT_USED, D10, D20, NOT_USED, 10, 20, 30, 40 s D20 Enumeration Ty NotUsed, D10, D20, D3 NotUsed, 10, 20, 30, 40, 5 s NotUsed Enumeration Ty NotUsed, D30, D60, D1 NotUsed, 30, 60, 120, 180 s NotUsed



Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - String Type - 1~9 character degree Celsius - String Type - 1~9 character degree Celsius -

Enumeration Ty D3, D6, D9, D12, D15, 3,6,9,12,15,18,21,INFIN dB

D3

Enumeration Ty D2, D3, D4, D6, D8, D 2,3,4,6,8,10,12,INFINITY dB

D2






Interval Type 1~6000 10~60000, step:10 ms

-

Interval Type 1~6000 10~60000, step:10 ms-


-


Interval Type 1~6000 10~60000, step:10 ms -



-



Interval Type 0~511 0~511 s Enumeration Ty EXISTS, NOT_EXISTS EXISTS, NOT_EXISTS None -

Enumeration Ty D1, D2, D3 1,2,3 None-

Enumeration Ty ACTIVE(Active BAM) ACTIVE,STANDBY None - Interval Type 1~512 1~512 None - Interval Type 0~56 0~28, step: 0.5 dB -



Interval Type 0~56 0~28, step: 0.5 dB - Interval Type 1~15 1~15 None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Enumeration Ty High, Medium, Low High, Medium, Low None - Interval Type 200~10000 200 to 10000 ms 2000

Interval Type 1~3 1 to 3 s2

Interval Type 1~3600 1~3600 s - Interval Type 1~64 1~64 ms 10 Interval Type 1~1024 1 to 1024 None 4 Interval Type 0~1000 0~1000 ms 0 Interval Type 0~1000 0~1000 ms - Interval Type 0~500000 0~500000 ms 5000

Enumeration Ty D0, D10, D20, D40, D6 0,10,20,40,60,80,100,120 ms


Enumeration Ty D0, D10, D20, D40, D6 0,10,20,40,60,80,100,120 ms Interval Type 0~64000,65535 0~64000,65535 ms 0 Interval Type 0~64000,65535 0~64000,65535 ms - Interval Type 0~64000,65535 0~64000,65535 ms 0


Interval Type 0~64000 0~64000 ms


Interval Type 0~64000 0~64000 ms 0

Interval Type 0~64000 0~64000 ms 0 Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 10 ms D240 Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 10 ms D2560

Interval Type 1~100 1~100 None 2 Interval Type 1~100 1~100 None 14 Interval Type 9~163 9~163 None - Interval Type 0~163 0~163 None - Interval Type 0~163 0~163 None - Interval Type 0~163 0~163 None - Interval Type 8000~12000 8000~12000 ms - Interval Type 30000~90000 30000~90000 ms - Enumeration Ty ATM_TRANS, IP_TRA ATM_TRANS, IP_TRAN None - Enumeration Ty ATM_TRANS, IP_TRA ATM_TRANS, IP_TRAN None - Enumeration Ty ATM_TRANS(ATM circui ATM_TRANS, IP_TRAN None ATM_TRANS Interval Type -120~-1,1~120 -120 to -1, 1 to 120 min -



-(SET MBMSFACH,ADD FACH) 10(ADD CELLMBMSFACH,ADD PCH)

-(SET MBMSFACH,ADD FACH) 35(ADD CELLMBMSFACH,ADD PCH)


Enumeration Ty NORMAL, FORMAT NORMAL,FORMAT None -

Enumeration Ty D0, D10, D20, D30, D40 0,10,20,30,40,50,60 s

D0

Enumeration Ty CONVERSATIONAL, CONVERSATIONAL, S None -

Enumeration Ty INTERACTIVE, BAC INTERACTIVE, BACK None

-

Enumeration Ty AMR, VP, PSR99, PSH AMR,VP,PSR99,PSHSPA None - Enumeration Ty AMR, VP, PSR99, PSH AMR,VP,PSR99,PSHSPA None -

Enumeration Ty M3UA_OVERRIDE_M None M3UA_LOADS Interval Type 0~10 0~10 None 1 Interval Type 0~65535 0~65535 ms 10 Enumeration Ty IP, HYBRID_IP IP, HYBRID_IP None -

Enumeration Ty ATM, IP, ATM_IP, HY ATM,IP,ATM_IP,HYBRI None

-

M3UA_OVERRIDE_MOD, M3UA_LOADSHARE_MOD (For details of these two modes, refer to RFC4666.)

Interval Type 1~32 1~32 None Enumeration Ty TRCH_HSDSCH, TRC TRCH_HSDSCH, TRCH None - Enumeration Ty TRCH_DCH, TRCH_E TRCH_DCH, TRCH_ED None - Enumeration Ty TRCH_DCH, TRCH_H TRCH_DCH, TRCH_HS None -


-(ADD FACHDYNTFS,ADD FACHLOCH,ADD FACH) 1(ADD RACHDYNTFS,ADD RACH) 3(ADD PCH,ADD PCHDYNTFS) 0(ADD BCH)


Interval Type 0~31 0~31 s 1 Interval Type 0~31,255 {0~6.2},{255}, step:0.2 s 255 Interval Type 0~31,255 {0~31},{255} s 255


-


D320(ADD CELLINTRAFREQHO) -(SET SMLC,SET INTRAFREQHO)


D640(ADD CELLINTRAFREQHO) -(SET SMLC,SET INTRAFREQHO)

Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms

D640(ADD CELLINTERFREQHONCOV) -(SET INTERFREQHONCOV)

Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms D640


D640(ADD CELLINTERRATHONCOV) -(SET INTERRATHONCOV)

Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms D640 Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms - Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms -


-


-


-

Interval Type 0~255 0~25.5, step: 0.1 s 50 Interval Type 0~4095 0~4095 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - IP Address Typ - 0.0.0.0~255.255.255.255 None - Interval Type 0~7 0~7 None - Enumeration Ty TS1(Time_slot_1), TS2( TS1, TS2, TS3, TS4, TS5 None - Enumeration Ty ON, OFF ON, OFF None -

Bit Field Type TS1, TS2, TS3, TS4, TS TS1,TS2,TS3,TS4,TS5,T None

-

Interval Type 0~65535 0 to 65535 None - String Type - 1~50 characters None -

Interval Type 0~511 0~511 s String Type - 15-bit numerical (0 to 9) s None - Interval Type 1~120 1 to 120 s 30 Enumeration Ty OFF, ON OFF, ON None - Interval Type 1~4294967295 1 to 4294967295 ms - Interval Type 1~128 1 to 128 s 64 Interval Type 10~2810 530~148930 kbit/s - Interval Type 1~3000000 1~3000000 kbit/s - Interval Type 0~4000000 0~4000000 kbit/s -

Enumeration Ty TRUE, FALSE TRUE, FALSE None-

Interval Type 200~10000 200 to 10000 ms 500 Interval Type 10~60 10 to 60 ms 30



-

Enumeration Ty NBAP_CCP, NBAP_NC NBAP_CCP, NBAP_NCP None -


-


-

Enumeration Ty TRUE, FALSE TRUE, FALSE None-

Interval Type 2000~60000 2000~60000 ms - Interval Type 24~1031 24~1031 byte 150 Enumeration Ty MUXCLOSE, NORTPC MUXCLOSE, NORTPCO None MUXCLOSE Enumeration Ty MUXCLOSE, NORTPC MUXCLOSE, NORTPCO None MUXCLOSE Interval Type 1~10 1~10 s 2 Bit Field Type REFERENCE_TIME_F REFERENCE_TIME_FO None - Bit Field Type REFERENCE_TIME_F REFERENCE_TIME_FO None - Interval Type 1~10000 1~10000 ms - Interval Type 1~10000 1~10000 ms - Enumeration Ty LOGIC(Logic uninhibit) LOGIC(Logic uninhibit), None - Interval Type 300~1000 300 to 1000 ms 1000 String Type - 0~9Characters None - Interval Type 0~100 0~1, step: 0.01 None -





Enumeration Ty D0, D10, D20, D40, D6 0, 10, 20, 40, 60, 80, 100 ms Interval Type 0~100 0~1, step: 0.01 None -


Enumeration Ty D8, D16 8, 16 kbit/s Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s -






-(SET FRCCHLTYPEPARA) D8(ADD CELLFRC)

Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,144,256,3 kbit/s -













Interval Type 0~100 0~1, step:0.01 None 83 Bit Field Type SF/2, HIGHER_LAYE SF/2, HIGHER_LAYER None SF/2


3


3

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s - Enumeration Ty NORMAL, SILENT NORMAL, SILENT None -

Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s Enumeration Ty D0, D8, D16, D32, D64 0, 8, 16, 32, 64, 128, 144, kbit/s -

Enumeration Ty SF4(SF4), SF8(SF8), S SF4,SF8,SF16,SF32,SF6 None SF16 Interval Type 0~100 0~1, step:0.01 per cent 0 Enumeration Ty SCHEDULED, NON-S SCHEDULED, NON-SC None - Interval Type 0~100 0~1, step: 0.01 None - Interval Type 0~400000 0~400000 bit/s 200000 Interval Type 0~100 0~1, step:0.01 per cent 20 Interval Type 1~10 1~10 None 1


D64(ADD CELLDCCC) -(SET DCCC)


1

Enumeration Ty SF4(SF4), SF8(SF8), S SF4, SF8, SF16, SF32, S None

SF8



no action



no action


1

inter-freq load handover(ADD CELLLDR) BE traff rate reduction(ADD NODEBLDR)


Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None Enumeration Ty NoAct(no action), Inte NoAct,InterFreqLDHO, None no action


no action


no action

Interval Type 0~100 0~1, step:0.01 per cent 55 Enumeration Ty D16, D32, D48, D64, D 16, 32, 48, 64, 96, 128, 2 None D64


Enumeration Ty D0, D1, D2, D3, D4, D5 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, None Enumeration Ty AUTO_CALC, HAND_ 0, 1 None -

Enumeration Ty D16, D32, D64, D128, 16, 32, 64, 128, 144, 256, kbit/s -


-

Interval Type 0~100 0~1, step: 0.01 None -


Interval Type 0~100 0~1, step:0.01 None 75 Interval Type 0~100 0~1, step:0.01 None 60




Interval Type 0~100 0~1, step:0.01 per cent 85 Interval Type 0~10 0~10 None 0

Interval Type 1~6000 10~60000, step:10 None-



1


1

Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None -

Interval Type 0~512 0~512 s Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty NO, YES NO, YES None - Enumeration Ty 2_Rates, 3_Rates 2_Rates, 3_Rates None - Enumeration Ty 2_Rates, 3_Rates 2_Rates, 3_Rates None -

Enumeration Ty D8, D16, D32, D64, D1 8,16,32,64,128,256 None Interval Type 0~100 0~1, step: 0.01 None - Enumeration Ty SCHEDULED, NON-S SCHEDULED, NON-SC None - Interval Type 0~100 0~1, step: 0.01 None - Enumeration Ty D8, D16, D32, D64, D1 8, 16, 32, 64, 128, 144, 2 kbit/s - Enumeration Ty SCHEDULED, NON-S SCHEDULED, NON-SC None - Interval Type 0~82 0~82 dB -


D64(ADD CELLCMCF) -(SET CMCF)

Interval Type 0~82 0~82 dB -

Interval Type 0~82 0~82 dB - Interval Type 0~82 0~82 dB - Interval Type 1~200 1~200 None 80 Interval Type 1~2 1~2 dB -







Interval Type 0~990 0~990 m -

Interval Type 0~3248 0~3248 m -

Interval Type 0~1800000 0~1800000 m -

Interval Type 0~5905440 0~5905440 m -

Interval Type 0~1800000 0~1800000 m -

Interval Type 0~5905440 0~5905440 m -

Interval Type 0~167 0 to 31(AEUa), 0 to 125( None

-

Interval Type 2~20 2~20 None - Interval Type 0~1999 0~1999 None - Interval Type 0~119 0~119 None - Interval Type 128~447 AEUa(128~191),AOUa(25 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None - Interval Type 0~65535 0~65535 None -


-

Enumeration Ty D1, D2, D3, D4, D5, D6 D1, D2, D3, D4, D5, D6, None -


-12(ADD CELLINTERRATHOCOV,ADD CELLINTERFREQHOCOV) -(SET INTERRATHOCOV,SET INTERFREQHOCOV)




-92(ADD CELLINTERFREQHOCOV) -(SET INTERRATHOCOV,SET INTERFREQHOCOV) -97(ADD CELLINTERRATHOCOV)



Enumeration Ty CPICH_EC/NO(CPICH CPICH_EC/NO,CPICH_ None


CPICH_RSCP(ADD CELLQOSHO) -(SET QOSHO)


Interval Type -115~-25 -115~-25 dBm Enumeration Ty Disable, Enable Disable, Enable None - Enumeration Ty NOTUSED, USED NOTUSED, USED None - Enumeration Ty Disable, Enable Disable, Enable None - Enumeration Ty Disable, Enable Disable, Enable None Disable

Enumeration Ty USED, NOT_USED USED, NOT_USED None

NOT_USED

Enumeration Ty Disable, Enable Disable, Enable None - Enumeration Ty ALL_USER(All User), ALL_USER,HALF,THIR None ALL_USER Interval Type 5~20 5~20 per cent - Interval Type 50~100 50~100 per cent -


Enumeration Ty GOLD, SILVER, COPP GOLD, SILVER, COPPE None

-

Enumeration Ty Disable, Enable Disable, Enable None - Enumeration Ty CELL/S, KBIT/S CELL/S, KBIT/S None - Interval Type 32~65535 32~65535 None - Enumeration Ty CC, LOOPBACK CC, LOOPBACK None -

Enumeration Ty DISABLE, ENABLE DISABLE, ENABLE None

DISABLE


-

Interval Type 0~7 0 to 7 None - Interval Type 0~100 0~100 per cent 70 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 100 Enumeration Ty CBR, RT_VBR, NRT_VB CBR,RT_VBR,NRT_VBR, None - Interval Type 0~100 0~100 None 0 Interval Type 0~100 0~100 per cent 70 Enumeration Ty DCH(UL_DCH,DL_DCH DCH, HSDPA, HSPA None - Enumeration Ty EDCH_TTI_10ms, EDC EDCH_TTI_10ms, EDCH None - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - String Type - 1~9 character V - String Type - 1~9 character V - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None - String Type - 1~9 character V - String Type - 1~9 character V -


Interval Type 0~255 0~255 None - Enumeration Ty TRUE, FALSE FALSE,TRUE None FALSE

Enumeration Ty TRUE, FALSE TRUE, FALSE NoneFALSE

Enumeration Ty NO, YES NO, YES None - Interval Type 0~100 0~100 None - Interval Type 0~65534 0~65534 None - Interval Type 0~100 0~100 None -

Interval Type 0~65534 0~65534 None - Interval Type 20~64000 20~64000 ms - Enumeration Ty CLOSE(Close), OPEN(O CLOSE,OPEN None -

Interval Type 0~20 0~2,Step:0.1 None


Interval Type 0~20 0~2,Step:0.1 None


Enumeration Ty M3UA_ASP, M3UA_IP None M3UA_ASP Enumeration Ty Active(Format active ar Active,Standby None Active Enumeration Ty E1_UNBA(E1 Unbalance) E1_UNBA, E1_BA, T1, E None - Interval Type 30~60000 30 to 60000 s - Interval Type 1~5 1~5 None - Interval Type 0~65535 0~65535 s - Enumeration Ty GMT-1200(GMT-12:00) GMT-1200(GMT-12:00), None -

0(ADD CELLINTERRATHOCOV,ADD CELLINTERFREQHOCOV) -(SET INTERRATHOCOV,SET INTERFREQHOCOV)

M3UA_ASP, M3UA_IPSP (For details of ASP and IPSP, refer to RFC4666.)

Recommended Value Impact Parameter RelationshipService Interrupted After ModificationNone AAL2 Path None N (No impact on the UE in idle mNone RNC This paramter must N (No impact on the UE in idle m0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for U0 Cell The ASCs are confi N (Impact on random access for UNone Physical chann None Not involved

Enable

None Not involved50 RNC None N (No impact on the UE in idle m100 RNC When [PARA]DsacAutoS N (No impact on the UE in idle mAC0:BARRED,AC1:BARR RNC When [PARA]DsacAutoS N (No impact on the UE in idle m

RNC When [PARA]DsacAutoS N (No impact on the UE in idle m

2 RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involvedNone RNC None YNone RNC None N (No impact on the UE in idle mACTIVE Cell Valid when [PARA]C N (no impact on the UE in idle mNODELIVERY RNC None N (no impact on the UE in idle mUE_BASED RNC None N (no impact on the UE in idle m

None RNC None Not involved

PPP Link(ADD PPPLNK) MLPPP Link, PPP Link(ADD MPLNK)

10(SET DSACAUTOALGO) 30(SET ACALGO)

None RNC Not involved-6 Cell None N (Impact on acquisition indicator1 Physical chann None Not involved

None

None Not involvedNone RNC None N (No impact on the UE in idle mNone Transmission r When [PARA]BWMODE[ N (No impact on the UE in idle mAutomatic Cell None N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None Not involved

antenna longitude, and AGPS antenna altitude should be set.1. When the value of [PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD GPS[/MML] is set to NODEB, the cell ID, GPS data report period, DGPS data report period, AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set.1. When the value of [PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD GPS[/MML] is set to NRNC_RNC, the RNC ID, GPS data report period, DGPS data report period, AGPS antenna latitude, AGPS antenna longitude, and AGPS antenna altitude should be set.1. When the value of [PARA]AGPSRECEIVERTYPE[/PARA] in [MML]ADD

RNC(SET BOXRPT,SET ALMLVL) SRB(SET ALMPORT)

4

This parameter is v N (No impact on the UE in idle m

1

None N (No impact on the UE in idle m

4


1

None N (No impact on the UE in idle mNone RAB This parameter is re N (No impact on the UE in idle mNO RNC None N (no impact on the UE in idle m5 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m200 RNC None N (No impact on the UE in idle m3000 RNC Valid when [PARA]A N (no impact on the UE in idle mNone AAL2 Path When the value of [ N (No impact on the UE in idle mNone IP path None Not involvedNone Adjacent Node When the value of [ Not involved

Cell(ADD CELLINTERFREQHOCOV) RNC(SET INTERFREQHOCOV)

Cell(ADD CELLINTERFREQHONCOV) RNC(SET INTERFREQHONCOV)

Cell(ADD CELLINTERRATHOCOV) RNC(SET INTERRATHOCOV)

Cell(ADD CELLINTERRATHONCOV) RNC(SET INTERRATHONCOV)

None

The adjacent node i Not involvedNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mFALSE RNC None N (No impact on the UE in idle mNone SCTP None Not involvedNone RAB None. N (No impact on the UE in idle mPrimary RNC When the value of N (No impact on the UE in idle mALL RNC None Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

Adjacent Node(ADD ADJMAP,ADD ADJNODE) AAL2 Path(ADD AAL2PATH) Services carried on the network element with the specific ATM address.(ADD AAL2RT) IP Path(ADD IPPATHBIND,ADD IPPATH)

None RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

None RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m3 Ethernet Port When the value of [ Y3 Ethernet Port When the value of [ Not involvedNone NodeB None Not involvedNone RNC When the value of N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mALLOWED RNC ATT needs to be se N (For the UE in idle mode, indic

None

When the value of Y

None

None Y

None

None Y

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP)



NO_V

None Not involvedENABLE Ethernet port When the value of [ Y7 Physical chann [PARA]Availablesigna N (Impact on random access for U0 Physical chann [PARA]Availablesigna N (Impact on random access for U15 Physical chann None N (Impact on random access for UNone RNC None N (No impact on the UE in idle mNone SRB None Not involvedNone subrack When the value of YNone subrack When the value of Y61 Cell None N (No impact on the UE in idle mNone RNC None Not involvedNone Ethernet port When the value of [ Not involvedNone Ethernet port When the value of [ Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

Cell

None YCONVERSATIONAL:7; STRNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m-30 Cell None N (No impact on the UE in idle m-20 Transport chan None N (Impact on cell system message None RNC None Not involved


None(ADD NRNCCELL,ADD QUICKCELLSETUP,ADD CELLSETUP) GSM900_DCS1800_BAND_USED(ADD GSMCELL)

None RNC None. N (No impact on the UE in idle mD384 RNC None N (No impact on the UE in idle m5 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle mRateDegrade RNC N (no impact on the UE in idle mNone RNC N (no impact on the UE in idle mNone RNC N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle m

D1024 RNC N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle m


[PARA]BeDlAct1[/PARA] is set to None;[PARA]BeDlAct2[/ARA] is not set to None;PARA] must not be equal with [PARA]BeDlAct1[/P

The following relationship must be satisfied:[PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2CpcTvmThd[/PARA].

The following relationship must be satisfied:[PARA]D2F2PTvmThd[/PARA] < [PARA]BeEFach2DTvmThd[/PARA].

D1024 RNC N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle mD1024 RNC None N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle m


D1024 RNC N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle mD1024 RNC None N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle m

D1024 RNC N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle m65535 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle mD1000 RNC None N (no impact on the UE in idle m

The following relationship must be satisfied:[PARA]BeH2FTvmThd[/PARA] < [PARA]BeEFach2HTvmThd[/PARA].

The following relationship must be satisfied:[PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2CpcTvmThd[/PARA].

The following relationship must be satisfied:[PARA]D2F2PTvmThd[/PARA] < [PARA]F2DTvmThd[/PARA].

The following relationship must be satisfied:[PARA]BeH2FTvmThd[/PARA] < [PARA]BeF2HTvmThd[/PARA].

D64 RNC N (no impact on the UE in idle mD5000 RNC None N (no impact on the UE in idle mD1440 RNC None N (No impact on the UE in idle m20 RNC Valid when [PARA]BE N (no impact on the UE in idle m

10

This parameter is a N (No impact on the UE in idle mYES RNC None N (no impact on the UE in idle mNone RAB At least one of this N (No impact on the UE in idle mNone RAB At least one of this N (No impact on the UE in idle mNone RNC N (no impact on the UE in idle mNone RNC N (no impact on the UE in idle mNone RNC N (no impact on the UE in idle mSINGLE RNC Valid when [PARA]BE N (no impact on the UE in idle mYES RNC Valid only when [PA N (no impact on the UE in idle mYES RNC Valid only when [PA N (no impact on the UE in idle mNO RNC Valid when [PARA]BE N (no impact on the UE in idle m3000 RNC Valid when [PARA]BE N (no impact on the UE in idle m3 Current BFD c When the value of [ Not involved32 Cell This parameter must N (No impact on the UE in idle m512 Cell This parameter must N (No impact on the UE in idle m

100 Cell N (No impact on the UE in idle m120 Cell None N (No impact on the UE in idle m

06&00&00 Cell N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m

hd[/PARA] < [PARA]BeEFach2HTvmThd[/PARA];

Cell(ADD CELLDCCC) RNC(SET DCCC)

[PARA]BeUlAct1[/PARA] is set to None;[PARA]BeUlAct2[/ARA] is not set to None.PARA] must not be equal with [PARA]BeUlAct1[/P

The value of this parameter must satisfy the following relationshiprelationship:[PARA][BgnAbnormalThd]>=[BgnUpdateThd][/PARA] .

The value of this parameter must satisfy the following relationshiprelationship:[PARA]BgnEndTime[/PARA] >[PARA]MBgnStartTime[/PARA]

01&00&00 Cell N (No impact on the UE in idle mON Cell None N (No impact on the UE in idle m

5 Cell N (No impact on the UE in idle mNone RAB This parameter is req N (No impact on the UE in idle m

FALSE Cell None N (No impact on the UE in idle m

D2 RNC None N (No impact on the UE in idle mD250 RNC None N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle m-92 Cell This paramter is val N (No impact on the UE in idle m

-115

None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone Board None Not involvedNone Board None Not involvedNone Ethernet port None Not involvedNone RNC None Not involvedNone RNC None N (No impact on the UE in idle m

The value of this parameter must satisfy the following relationshiprelationship:[PARA]BgnEndTime[/PARA] >[PARA]MBgnStartTime[/PARA]

The value of this parameter must satisfy the following relationshiprelationship:[PARA][BgnAbnormalThd]>=[BgnUpdateThd][/PARA] .

Cell(ADD CELLINTRAFREQHO) RNC(SET INTRAFREQHO)

REQUIRED

None N (No impact on the UE in idle mREQUIRED Cell None N (No impact on the UE in idle mNone E1/T1 link None Not involvedNone Cell None YNone E1T1 Link None Not involvedNone RNC When the value of [ N (No impact on the UE in idle mNone board None YNone E1T1 link None Not involvedNone board None Not involvedNone RNC When the value of [ Not involvedNone Corresponding o None Not involvedNone LGC port None Transmission Resource ManagemeOFF LGC port When the value of Not involved

0

None Not involved

Cell(ADD CELLINTERRATHOCOV,ADD CELLINTERRATHONCOV) RNC(SET INTERRATHOCOV,SET INTERRATHONCOV)

PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) UNILNK(ADD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)

0 LGC port N (No impact on the UE in idle m0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]BWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]BWDHORSVBW N (No impact on the UE in idle m

0

None Not involved0 LGC port N (No impact on the UE in idle m0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]BWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]BWDHORSVBW N (No impact on the UE in idle m

CLRBW[/PARA] = 0.If

PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) Fractional link(ADD FRALNK) UNILNK(ADD UNILNK) MLPPP Group, PPP Link(ADD MPGRP)

CLRBW[/PARA] = 0.If

0

None Not involved0 LGC port N (No impact on the UE in idle m0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]BWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]BWDHORSVBW N (No impact on the UE in idle m120 LGC port When the value of [ N (No impact on the UE in idle mNone Transmission r When [PARA]GRPT[/PA N (No impact on the UE in idle m25 LGC port When the value of [ N (No impact on the UE in idle m

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(ADD UNILNK) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP)

CLRBW[/PARA] = 0.If

ON RNC None N (No impact on the UE in idle m

RNC None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle mNONE RNC None N (No impact on the UE in idle mNone AAL2 Path When the value of [ YNULL IP Path None Y

None

N (No impact on the UE in idle mNone LGC port None Transmission Resource Manageme

SYS_LEVEL:ONNODEB_LEVEL:ONCELL_LEVEL:ON

IPoA PVC(ADD IPOAPVC) SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH)

When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to FRAATM, the CARRYFRAATMLNK is required. When the value of [PARA]CARRYT[/PARA] is set to FRAATM, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to FRAATM, this parameter is valid.

None


None NodeB None Not involved

None


None

YNone SAAL When the value of [ Not involvedNone LGC port None Not involvedNone LGC port None Transmission Resource Manageme


When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to IMA, the CARRYIMAGRPN is required. When the value of [PARA]CARRYT[/PARA] is set to IMA, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to IMA, this parameter is valid.

IPoA PVC(ADD IPOAPVC) AAL2 Path(ADD AAL2PATH) SAAL(ADD SAALLNK)

When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to NCORT, the CARRYNCOPTN is required. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to NCOPT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] is set to NCOPT, this parameter is valid.

AAL2 Path(ADD AAL2PATH) SAAL(ADD SAALLNK)

ARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or

None

Y

None


AAL2 Path(ADD AAL2PATH) SAAL(ADD SAALLNK) IPoA PVC(ADD IPOAPVC)

number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required.2. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, the bearing UNI link number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required.3. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to FRAATM, the bearing FRAATM link number, bearing VPI, bearing VCI, TX traffic record index, RX traffic record index, and peer type are required.4. When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is


When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, the CARRYUNILNKN is required. When the value of [PARA]CARRYT[/PARA] is set to UNI, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, this parameter is valid.

None

When the value of [ Y

None


None

N (No impact on the UE in idle mNone Subsystem None N (No impact on the UE in idle mNone Subsystem None N (No impact on the UE in idle m4500 LGC port None N (No impact on the UE in idle mNone Cell None Not involvedNone Cell Before configuring t N (No impact on the UE in idle mNone Cell None Not involvedOFF RNC None N (For the UE in idle mode, if th32 Cell This parameter must N (No impact on the UE in idle m

SAAL(ADD SAALLNK) IPoA PVC(ADD IPOAPVC)

SAAL(ADD SAALLNK) IPoA PVC(ADD IPOAPVC)


When the value of [PARA]CARRYT[/PARA] is set to ATMLGCPORT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to ATM logic port, this parameter is valid.

512 Cell This parameter must N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

100 RNC None N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

0 RNC None N (No impact on the UE in idle m1000 Ethernet port None Not involvedAUTO PVC When the value of [ Not involved

SAAL None N (No impact on the UE in idle m1024 SAALLNK/AAL2 None Not involved15 RNC None N (No impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle m

TX_DIVERSITY_ON_TO_ Cell None N (No impact on the UE in idle m

None RNC None N (No impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle m

Hybird IP, the parameter is EF.When the interface type is is EF; transimssion type is Hybird IP, the parameter is

UNI: 1000NNI: 200

None Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell Valid when [PARA]C N (no impact on the UE in idle m

None Cell Valid when [PARA]C N (no impact on the UE in idle mNone Cell None N (No impact on the UE in idle mMIXED_ENVIRONMENT Cell Valid when [PARA]C N (no impact on the UE in idle mTU Cell None N (No impact on the UE in idle m

None Cell Valid when [PARA]C N (no impact on the UE in idle m

None Cell Valid when [PARA]C N (no impact on the UE in idle m15 RNC None N (No impact on the UE in idle mSINGLE_HOST Cell None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m

None

The value of this p Not involvedNone Cell None N (No impact on the UE in idle m10 RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mACTIVE Cell Valid when [PARA]C N (no impact on the UE in idle mUE_ASSISTED RNC None N (no impact on the UE in idle mSF8 Cell The value of this p N (No impact on the UE in idle mNone Cell None N (no impact on the UE in idle m

None Cell


QUICKCELLSETUP,ADD CELLMBMSSA,ADD CELLEFACH,ADD CELLCBSSAC,ADD CELLRLACTTIME,ADD SMLCCELL,ADD CELLAMRC,ADD CELLDCCC,ADD CELLAMRCWB,ADD CELLSETUP) RNC(ADD CELLMBDRINTERRAT,ADD CELLMBDRINTERFREQ,ADD NRNCCELL,ADD CELLHCSHO,ADD INTRAFREQNCELL,ADD INTERFREQNCELL,ADD CELLINTER

90 Cell N (No impact on the UE in idle m9 RNC None N (no impact on the UE in idle m180 RNC None N (no impact on the UE in idle mNOT_RESERVED Cell None N (No impact on the UE in idle mNOT_RESERVED Cell None N (No impact on the UE in idle mAFFECT Cell None N (No impact on the UE in idle mAFFECT Cell None N (No impact on the UE in idle m45 RNC None N (No impact on the UE in idle m

30 Cell N (No impact on the UE in idle m

None Cell

None Y

The value of this parameter must satisfy the following relationship: [PARA]CellOverrunThd[/PARA] >= [PARA]CellUnderrunThd[/PARA].

The value of this parameter must satisfy the following relationship: [PARA]CellOverrunThd[/PARA] >= [PARA]CellUnderrunThd[/PARA].

CFG_DL_BLIND_DETECTIRNC None N (no impact on the UE in idle m2 RNC None N (no impact on the UE in idle m5 RNC None N (no impact on the UE in idle mCONVOLUTIONAL Transport chan None Not involved5 IP Path When the value of [ N (no impact on services when theNone RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone Ethernet port None Not involvedNO SCTP None YNO SCTP None YCRC32 SCTP None YNone Ethernet port None Not involved

TEN_MSEC RNC None N (No impact on the UE in idle m







TEN_MSEC

None N (no impact on the UE in idle m

TEN_MSEC


TEN_MSEC


TEN_MSEC

None N (no impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m

Cell(ADD CELLQUALITYMEAS) RNC(SET QUALITYMEAS)




0

None Y0 Cell None N (No impact on the UE in idle m

0 Cell None N(For the UE in idle mode, the larg

None LGC port When the value of [ N (No impact on the UE in idle mNone RNC None YFALSE Cell None YUL_DL_BOTH NodeB None. N (No impact on the UE in idle m

None N (No impact on the UE in idle mCMCF_DL_HLS_SWITCH:RNC None N (no impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m

Cell(ADD CELLSETUP) RNC(ADD NRNCCELL)

WALKING_SPEED_AND_HOT_SPOT_CELL

Cell(ADD CELLCMCF) RNC(SET CMCF)

CMP_IU_IMS_PROC_AS_ RNC None N (no impact on the UE in idle m

None

This parameter cann Not involved

RNC(RST IU,RST IURESOURCE,ADD CNNODE,ADD CNDOMAIN) RAB(ADD TYPRABBASIC,ADD CELLRLPWR)

None RNC

None Not involvedNormal RNC None N (No impact on the UE in idle mNone Adjacent Node None Not involvedNone RNC None Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None Not involved

None

This paramter is v N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None Not involved

None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involved255 RNC None Not involvedNone RNC None Not involvedNone RNC None N (No impact on the UE in idle mON Cell None N (No impact on the UE in idle m3 Cell This paramter is val N (No impact on the UE in idle m

13

N (No impact on the UE in idle m

Cell(ADD QUICKCELLSETUP,ADD GSMCELL,ADD NRNCCELL) (ADD CELLSETUP)

IU,ADD CZ,ADD CNOPERAT

should be set. When the value of [PARA]RSCMNGM

RNC(SET DRD) Cell(ADD CELLDRD)

[PARA]CodeBalancingDrdSwitch[/PARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML]

SF8


OFF

If this parameter N (No impact on the UE in idle mFALSE Cell This paramter is v N (No impact on the UE in idle mENGLISH RNC None N (For the UE in idle mode, if th

None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle m

20

This parameter is a N (No impact on the UE in idle m


[PARA]CodeBalancingDrdSwitch[/PARA] parameter is set to ON. If this parameter is set through both the [MML]ADD CELLDRD[/MML]


COEXIST_MEAS_THD_CHOICE_INTERFREQ

Cell(ADD CELLHOCOMM) RNC(SET HOCOMM)


NON-SUPPORTING_UE_ RNC When [PARA]MOCNSup N (No impact on the UE in idle m2 SAAL When the value of [P N (No impact on the UE in idle m30 SAAL When the value of [P N (No impact on the UE in idle m10 SAAL When the value of [P N (No impact on the UE in idle mIP:15; ATM:20 RNC The relationship betwe N (No impact on the UE in idle mIP:15; ATM:20 RNC The relationship betwe N (No impact on the UE in idle mIP:15; ATM:20 RNC The relationship betwe N (No impact on the UE in idle mIP:15; ATM:25 RNC The relationship betwe N (No impact on the UE in idle m25 RNC N (No impact on the UE in idle m25 RNC N (No impact on the UE in idle mIP:25; ATM:30 RNC The relationship betwe N (No impact on the UE in idle mIP:25; ATM:30 RNC The relationship betwe N (No impact on the UE in idle mIP:25; ATM:30 RNC The relationship betwe N (No impact on the UE in idle mIP:25; ATM:50 RNC The relationship betwe N (No impact on the UE in idle m50 RNC N (No impact on the UE in idle m50 RNC N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle mOnly_To_Inter_Frequency RNC None. N (No impact on the UE in idle mNOT_ALLOWED Cell This paramter is val N (No impact on the UE in idle mNO RNC None Not involved

2.The relationship between the 2.The relationship between the


2 Cell None N(impact on Cell Selection and Re

2 Cell This parameter is v N(impact on Cell Selection and Re

0 Cell

This parameter is va N (No impact on the UE in idle m

0 Cell

This parameter is va N (No impact on the UE in idle m127 Cell None N(impact on Cell Selection and Re127 Cell None N(impact on Cell Selection and ReD1280 Cell This paramter is val N (No impact on the UE in idle m-20 Physical chann None N (Impact on random access for UNone UE CONTEXTTYPE needs Not involvedNO Ethernet port None Not involvedD16 RNC None N (No impact on the UE in idle mD16 RNC None N (No impact on the UE in idle m32 Cell This parameter must N (No impact on the UE in idle m512 Cell This parameter must N (No impact on the UE in idle m

N (no impact on the UE in idle m

WBAMR_BITRATE_23.85K

Cell(ADD CELLAMRCWB) RNC(SET AMRCWB)

[PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMode[/PARA] >= [PARA]CopperMaxMode[/PARA]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >= [PARA]SilverMaxMo

N (no impact on the UE in idle m5 Ethernet port None Not involvedNone RNC CountCThreshold nee N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

CP1_not_Supported

This paramter is val YNone RNC This parameter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m8 Cell This parameter is re N (No impact on the UE in idle mUNAVAILABLE SCTP None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

RNC When the value of [ N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mNone RNC None Not involved

80

N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle m900 RNC CsInfoUpdTmr needs N (No impact on the UE in idle m

NBAMR_BITRATE_12.20K

Cell(ADD CELLAMRC) RNC(SET AMRC)

de[/PARA] >= [PARA]SilverMaxMode[/PARA] >= [PARA]CopperMaxMode[/PARA]. The following relationship must be satisfied: [PARA]GoldMaxMode[/PARA] >=


Iur, transmission type is ATM, the parameter is RT_VBR; transimssion is LQAF43.When the interface type is


This parameter is valid when [PARA]NcovHoOn2GldInd[/PARA] in [MML]SET INTERRATHONCOV[/MML] is set to ON. This parameter is valid when [PARA]NcovHoOn2GldInd[/PARA] is set to ON.

SUPP_NONE RNC None N (No impact on the UE in idle mNone RNC CSNRILength needs t N (No impact on the UE in idle mTRUE RNC When [PARA]DsacAutoS N (No impact on the UE in idle mOFF Cell None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mCS_AMRC_SWITCH:OFF, RNC None N (no impact on the UE in idle m

DCH RNC None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle mEDCH_TTI_10ms RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle m

None None Not involved

None Not involved5 RNC None N (No impact on the UE in idle m50 RNC None N (No impact on the UE in idle mNone Transmission r None Not involvedON RNC None Not involvedNone RNC None Not involvedNone RNC This classified zone is N (no impact on the UE in idle m

Iur, transmission type is ATM, the parameter is RT_VBR; transimssion is LQAF43.When the interface type is

Physical channel

BIT4(ADD SCCPCHBASIC) BIT2(ADD PRACHBASIC)

Physical channel

D64 RNC N (no impact on the UE in idle mD1000 RNC None N (no impact on the UE in idle mD5000 RNC None N (no impact on the UE in idle m30 RNC None N (no impact on the UE in idle m

30 RNC None N (No impact on the UE in idle mRATE_UP_AND_DOWN_ RNC None N (no impact on the UE in idle m30 RNC None N (no impact on the UE in idle m

The following relationship must be satisfied:[PARA]D2F2PTvmThd[/PARA] < [PARA]F2DTvmThd[/PARA];[PARA]D2F2PTvmThd[/PARA] < [PARA]BeEFach2DTvmThd[/PARA].

100 RNC None N (no impact on the UE in idle m16 RAB None. N (No impact on the UE in idle m2 RAB None. N (No impact on the UE in idle mNone RNC None Not involved255 RNC When [PARA]MOCNSup N (No impact on the UE in idle m-22 RNC None N (No impact on the UE in idle m-13 Cell None N (No impact on the UE in idle m25(AEUa),200(AOUa) IMA group N (No impact on the UE in idle m0 RNC This paramter must N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle m7 RNC This parameter is v N (No impact on the UE in idle m

None

N(impact on Cell Selection and Re

None

The [PARA]DENO[/P Not involvedNone Ethernet port None Not involvedNone RNC None Not involved

+ 3*2 + [PARA]DLYGB[/PA

Cell(ADD CELLSELRESEL) RNC(ADD NRNCCELL)

This parameter is required when the [PARA]QrxlevminExtSup[/PARA] parameter is set to TRUE but not required when the [PARA]QrxlevminExtSup[/PARA] parameter is set to FALSE. This paramter is valid only when [PARA]QrxlevminExtSup[/PARA] is set to TRUE.

M3UA(ADD M3DE) RNC(ADD M3LKS,ADD M3RT)

None

None Not involved1 Cell None N (No impact on the UE in idle m

None RAB None. N (No impact on the UE in idle mMAY RNC None N (No impact on the UE in idle m50 RNC This paramter is va N (No impact on the UE in idle m

64

None N (no impact on the UE in idle m10 RNC This paramter is va N (No impact on the UE in idle m

RNC None N (No impact on the UE in idle m

D128 RNC None N (No impact on the UE in idle m

Ethernet port(PING MAC) RNC(TRC MAC)


D6(SET LDM) D3(SET SATLDM)

D8

If this parameter N (No impact on the UE in idle mD64 RNC This parameter can N (No impact on the UE in idle mD64 RNC None. N (No impact on the UE in idle m

64


64


5 RNC None N (No impact on the UE in idle m

0 Cell None N (No impact on the UE in idle m

90 Cell N (No impact on the UE in idle mSF/2 NodeB None. N (No impact on the UE in idle m

RNC(SET FRCCHLTYPEPARA) Cell(ADD CELLFRC)



The value of this parameter must satisfy the following relationship:[PARA]DlOlcTrigThd[/PARA](See [MML]ADD CELLLDM[/MML]) >= [PARA]DlCellTotalThd[/PARA];[PARA]DlCellTotalThd[/PARA] >= [PARA]DlHOThd[/PARA] .

None Cell N (No impact on the UE in idle m



The value of this parameter must satisfy the following relationship:[PARA]DLOVSFSF[/PARA]>=[PARA]DLCODENO[/PARA]. .

The value of this parameter must satisfy the following relationship:[PARA]DlHOThd[/PARA] > [PARA]DlConvAMRThd[/PARA];[PARA]DlConvAMRThd[/PARA] > [PARA]DlOtherThd[/PARA] .

The value of this parameter must satisfy the following relationship:[PARA]DlHOThd[/PARA] > [PARA]DlConvNonAMRThd[/PARA];[PARA]DlConvNonAMRThd[/PARA] > [PARA]DlOtherThd[/PARA] .

3


3


D64 RNC N (no impact on the UE in idle m

Cell(ADD CELLLDR) NodeB(ADD NODEBLDR)


When the value of DlMidRateCalc is HAND_APPOINT,the following relationship must be satisfied:[PARA]DlDcccRateThd[/PARA] <= [PARA]DlMidRateThd[/PARA].

D64

N (no impact on the UE in idle mD64 RNC N (No impact on the UE in idle m

SF32 Cell N (No impact on the UE in idle m


This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. To configure this parameter, you must take into consideration the actual full-coverage rate of a certain cell. Otherwise, the QoS would be affected.

users ([PARA]UserPriority[/PARA] is set to

The value of this parameter must satisfy the following relationship:[PARA]DlHoCeCodeResvSf[/PARA] >= [PARA]DlLdrCreditSfResThd[/PARA];[PARA]DlHoCeCodeResvSf[/PARA] >= [PARA]CellLdrSfResThd[/PARA] .

85 Cell N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m10 RNC This paramter is va N (No impact on the UE in idle m200000 Cell None N (No impact on the UE in idle m20 Cell None N (No impact on the UE in idle m1 Cell None N (No impact on the UE in idle m


1


The value of this parameter must satisfy the following relationship:[PARA]DlCellTotalThd[/PARA] >= [PARA]DlHOThd[/PARA] ;[PARA]DlHOThd[/PARA] > [PARA]DlConvAMRThd[/PARA];[PARA]DlHOThd[/PARA] > [PARA]DlConvNonAMRThd[/PARA] .


SF8

The value of this p N (No impact on the UE in idle mno action Cell None N (No impact on the UE in idle m

no action





CodeAdj(ADD CELLLDR) BE traff rate reduction(ADD NODEBLDR)


no action

None N (No impact on the UE in idle mno action Cell None N (No impact on the UE in idle m

1






The value of this parameter must satisfy the following relationship: [PARA]DlLdrTrigThd[/PARA] >= [PARA]DlLdrRelThd[/PARA];[PARA]DlOlcRelThd[/PARA] >= [PARA]DlLdrRelThd[/PARA].

inter-freq load handover(ADD CELLLDR) no action(ADD NODEBLDR)


no action


None N (No impact on the UE in idle m70 Cell N (No impact on the UE in idle m1000 Cell None N (No impact on the UE in idle mD64 NodeB None. N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m

D1

None N (no impact on the UE in idle mHAND_APPOINT RNC This parameter is v N (no impact on the UE in idle m




[PARA]DlOlcTrigThd[/PARA] > [PARA]DlLdrTrigTh



3000 RNC

N (no impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle m


This parameter is valid when the [PARA]DlMidRateCalc[/PARA] in [MML]SET DCCC[/MML] is set to HAND_APPOINT, and the following relationship must be satisfied:[PARA]DlDcccRateThd[/PARA] <= [PARA]DlMidRateThd[/PARA].

The following relationship must be satisfied: [PARA]UlModeChangeTimerLen[/PARA] <= [PARA]DlModeChangeTimerLen[/PARA].





The value of this parameter must satisfy the following relationship: [PARA]DlOlcTrigThd[/PARA] >= [PARA]DlOlcRelThd[/PARA];[PARA]DlOlcRelThd[/PARA] >= [PARA]DlLdrRelThd[/PARA].



The value of this parameter must satisfy the following relationship: [PARA]DlOlcTrigThd[/PARA] >= [PARA]DlOlcRelThd[/PARA];[PARA]DlOlcTrigThd[/PARA] > [PARA]DlLdrTrigThd[/PARA];[PARA]DlOlcTrigThd[/PARA] >= [PARA]DlCellTotalThd[/PARA].

The value of this parameter must satisfy the following relationship:[PARA]DlConvAMRThd[/PARA] > [PARA]DlOtherThd[/PARA];[PARA]DlConvNonAMRThd[/PARA] > [PARA]DlOtherThd[/PARA];[PARA]DlOtherThd[/PARA] >= [PARA]DlLdrTrigThd[/PARA](See [MML]ADD CELLLDM[/MML]).

None Cell N (No impact on the UE in idle m

1


1

None N (No impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle m

20

None N (No impact on the UE in idle mNO RNC Valid when [PARA]VP N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mOFF RNC None N (No impact on the UE in idle m3_Rates RNC None N (no impact on the UE in idle m3_Rates RNC None N (no impact on the UE in idle m

5

None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m

The value of this parameter must satisfy the following relationship:[PARA]DLOVSFSF[/PARA]>=[PARA]DLCODENO[/PARA]. .



Cell(ADD CELLQOSHO) RNC(SET QOSHO)


FALSE RNC None N (No impact on the UE in idle m

D64

None N (No impact on the UE in idle m10 RNC This paramter is val N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle mD64 RNC None. N (No impact on the UE in idle m

50 RNC


50 RNC


120 RNC



The following relationship must be satisfied: [PARA]DlThdE1[/PARA] <= [PARA]DlThdE2[/PARA] < [PARA]DlThdF2[/PARA] <= [PARA]DlThdF1[/PARA].



120 RNC

N (no impact on the UE in idle m80 Cell None N (No impact on the UE in idle m

64

None N (no impact on the UE in idle mNone IMA group N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone SRB None Not involvedNone RNC When the value of [P YNone RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC When the value of [PA Y

None

This paramter is val Y

None

This paramter is val YSINGLE_TPC RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone Ethernet port None Not involved



RA] + 3*2;[PARA]DELAY[/



None Ethernet port None Not involved

None

Not involvedBOTH PVC When the value of [ Not involved

RNC(ADD MTP3RT,ADD NRNC,ADD CNNODE,ADD MTP3LKS,ADD N7DPC) M3UA(ADD M3DE) Adjacent Node(ADD ADJNODE)

The [PARA]DPX[/PARA] field in [MML]ADD N7DPC[/MML] The parameter [PARA]DPX[/PARA] in [MML]ADD N7DPC[/MML] When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUR, IUCS, or NNI_AAL2SWITCH, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUPS and [PARA]SGSNFLG[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, this parameter is valid.

DRA_AQM_SWITCH:OFF,RNC N (no impact on the UE in idle m

-18 Cell None N (No impact on the UE in idle m

5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m

2

If this parameter N (No impact on the UE in idle mNO RNC Valid when [PARA]BE N (no impact on the UE in idle mIP:60; ATM:45 RNC The relationship betwe N (No impact on the UE in idle mIP:60; ATM:45 RNC The relationship betwe N (No impact on the UE in idle mIP:60; ATM:45 RNC The relationship betwe N (No impact on the UE in idle mIP:60; ATM:80 RNC The relationship betwe N (No impact on the UE in idle m80 RNC N (No impact on the UE in idle m80 RNC N (No impact on the UE in idle mDR_RRC_DRD_SWITCH:ORNC None N (no impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle m6 RNC DRXCycleLenCoef n N (For the UE in idle mode, affect

DRA_BE_RATE_DOWN_BF_HO_SWITCH,DRA_THROU_DCCC_SWITCH,DRA_BE_EDCH_TTI_RECFG_SWITCH and DRA_HSUPA_DCCC_SWITCH are valid when DRA_DCCC_SWITCH is set to ON;For BE service,DRA_HSDPA_STATE_TRANS_SWITCH and DRA_HSUPA_STATE_TRANS_SWITCH are valid when DRA_PS_BE_STATE_TRANS_SWITCH is set to ON;For RT service,DRA_HSDPA_STATE_TRANS_SWITCH and DRA_HSUPA_STATE_TRANS_SWITCH are valid when DRA_PS_NON_BE_STATE_TRANS_SWITCH is set to ON;



6 RNC None N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle m

None

None Not involvedON RNC None N (No impact on the UE in idle m

None Not involvedNone Ethernet port None Not involvedNone RNC None YNone E1/T1 None N (No impact on the UE in idle m

None

None Not involvedNone RNC Not involvedNone IP Route None Not involvedNone IP Route None Not involvedNone E1/T1 None N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mFull Ethernet port When the value of [ N (No impact on the UE in idle m

PPP Link(ADD PPPLNK) MLPPP Link(ADD MPLNK)

0(PING IP) None(SET PHBMAP,SET DSCPMAP) 62(ADD SCTPLNK)

Ethernet port(PING IP) RNC(SET DSCPMAP) SCTP(ADD SCTPLNK) Board(SET PHBMAP)

IP Route(ADD IPRT) RNC(ADD IPRTBIND)

not be the same as any IP address that

20 RNC This paramter is val N (No impact on the UE in idle m180 RNC This paramter is val N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle mCONDITIONALSHUTDO Cell This paramter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m30 RNC None N (no impact on the UE in idle m4 RNC None N (no impact on the UE in idle m8 RNC None N (no impact on the UE in idle m2 RNC None N (no impact on the UE in idle m1 Cell None N (No impact on the UE in idle mNone IP Path When the value of [ N (no impact on services when the500 RNC None N (no impact on the UE in idle m100 RNC None N (no impact on the UE in idle m

30000

If this parameter N (No impact on the UE in idle m3000 RNC None N (no impact on the UE in idle m5000 RNC None N (no impact on the UE in idle m

41

If this parameter N (No impact on the UE in idle mNone RNC When the value of [ Y336 RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mD1 RAB This parameter is r N (No impact on the UE in idle m16 RAB None. N (No impact on the UE in idle m16 RAB None. N (No impact on the UE in idle m

RNC None N (no impact on the UE in idle mNone RAB This parameter is r N (No impact on the UE in idle m

RNC(SET FRC) Cell(ADD CELLFRC)

RNC(SET FRC) Cell(ADD CELLFRC)

selectedRATE_256KBPS: selectedRATE_384KBPS: not

None RAB N (No impact on the UE in idle m

None RAB N (No impact on the UE in idle m2 RAB None. N (No impact on the UE in idle m2 RAB None. N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m20 RNC None N (No impact on the UE in idle m10 Cell None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mFALSE RNC None N (No impact on the UE in idle mNone RNC When the value of [P YON RNC None N (No impact on the UE in idle mOFF RNC None Not involvedOFF RNC None N (no impact on the UE in idle mOCT RNC When the value of [ YNone RNC None N (No impact on the UE in idle m

This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS.This parameter is must larger than [PARA]EdchTargetLittleRetransNum[/PARA].

This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS.This parameter is must less than [PARA]EdchTargetLargeRetransNum[/PARA].

UEA0-1; UEA1-1 RNC None N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle m

None RNC Negotiation with the p Not involved

1 Ethernet port None Not involved1 Ethernet port None Not involved1 Ethernet port None Not involved204800 Ethernet port None Not involved1 Ethernet port None Not involved60 Ethernet port None Not involved1 Cell None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m7000 RNC None N (No impact on the UE in idle m03&00&00 RNC When the value of [P YD1024 RAB The value of this par N (No impact on the UE in idle mNone RAB The value of this par N (No impact on the UE in idle m50 RAB This parameter is r N (No impact on the UE in idle m160 RAB This parameter is r N (No impact on the UE in idle m80 RAB This parameter is r N (No impact on the UE in idle mSUN RNC When the value of [ YLAST RNC When the value of [ YNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedD16000 RNC None N (no impact on the UE in idle mD5000 RNC None N (no impact on the UE in idle mNone Transport chan None Not involved

None Cell This parameter is Not involved

None Not involvedREQUIRE Cell This parameter is r N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None. N (No impact on the UE in idle m4 RNC None N (no impact on the UE in idle mIt must be consistent with th Ethernet port When the value of [ N (No impact on the UE in idle m


10(ADD CELLMBMSFACH) None(SET MBMSFACH) -30(SET MSCHFACH)

Cell(ADD CELLMBMSFACH) RNC(SET MSCHFACH,SET MBMSFACH)

1(ADD ATMLOGICPORT,ADD UNILNK,SET OPT,ADD IMAGRP,ADD FRALNK) None(ADD PORTFLOWCTRLPARA,SET ETHPORT) 0(ADD IPLOGICPORT,ADD PPPLNK,ADD MPGRP)

Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) Corresponding optical port(SET OPT) Ethernet port(SET ETHPORT) MLPPP Group, PPP Link(ADD PPPLNK,ADD MPGRP) UNILNK(ADD UNILNK) LGC port(ADD IPLOGICPORT,ADD ATMLOGICPORT) RNC(ADD PORTFLOWCTRLPARA)

When the value of [PARA]FLOWCTRLSWITCH[/PARA] in [MML]SET OPT[/MML] is set to ON, the flow control parameter index should be set. When the value of [PARA]FLOWCTRLSWITCH[/PARA] is set to ON in [MML]SET ETHPORT[/MML], the FCINDEX should be set. 1.When the value of [PARA]FLOWCTRLSWITCH[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set.2.The type of the flow control parameter index must be IP.

16bit

None YSTEPSIZE_1DB RNC None N (No impact on the UE in idle m

None


None

This paramter is val Y-30 RNC None N (No impact on the UE in idle m-200 RNC None N (No impact on the UE in idle m12 RNC None. N (No impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle m

RNC

None Not involvedNone RNC None Not involved




CFGMML-RNCX-YYYYMMDDHHMMSS.txt(EXP CFGMML) None(BKP DB)

D3

None N (No impact on the UE in idle mD32 NodeB This parameter is re N (No impact on the UE in idle mON Cell None N (No impact on the UE in idle m


ON

N (No impact on the UE in idle mNone RNC none Not involvedNone This parameter None Not involvedNone RNC None Not involvedOFF RNC None N (no impact on the UE in idle mNO IP Path [PARA]FPMUXSWITCH[ N (no impact on the UE in connec2 IP Path When the value of [ N (no impact on the UE in connec256 MLPPP Group None N (No impact on the UE in idle m


None Fractional link N (No impact on the UE in idle mD128 IMA group None N (No impact on the UE in idle mNone Adjacent Node The factor table in N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involved

Fractional link(ADD FRALNK) Corresponding optical port(SET OPT) PPP Link(ADD PPPLNK) IMA group(ADD IMAGRP) LGC port(ADD ATMLOGICPORT,ADD IPLOGICPORT) MLPPP Group, PPP Link(ADD MPGRP) UNILNK(ADD UNILNK) Ethernet port(SET ETHPORT)

When the value of [PARA]FRALNKT[/PARA] in [MML]ADD FRALNK[/MML] is set to ON, this parameter is valid and the flow control parameter index can be set. When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to UOIa and the value of [PARA]LGCAPPTYPE[/PARA] is set to ATM, the flow control switch should be set. When the value of [PARA]FLOWCTRLSWITCH[/PARA] in [MML]ADD IMAGRP[/MML] is set to ON, this parameter is valid and the flow control parameter index should be set.

parameter index are required.

0

Not involved0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]FWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]FWDHORSVBW N (No impact on the UE in idle m

0

None Not involved

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK) LGC port(ADD IPLOGICPORT)

following rules:[PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] < [PARA]FWDCONGCLRBW[/PARA] < [PARA]MINBW[/PARA] or [PARA]FWDHORSVBW[/PARA] = [PARA]FWDCONGBW[/PARA] = [PARA]FWDCONGCLRBW[/PARA] = 0.If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]FWDHORSVBW[/PARA],[PARA]FWDCONGBW[/PARA],[PARA]FWDCONGCLRBW[/PARA] must obey the following rules:[PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] <

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK)

0 LGC port N (No impact on the UE in idle m0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]FWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]FWDHORSVBW N (No impact on the UE in idle m

0

Not involved0 LGC port None Transmission Resource Manageme0 AAL2 Path None N (No impact on the UE in idle m0 IP Path [PARA]FWDHORSVBW N (no impact on the UE in connec0 Transmission r [PARA]FWDHORSVBW N (No impact on the UE in idle mNone Physical chann Either [PARA]GainFa Not involved15 Physical chann Either [PARA]GainFa Not involvedNone Ethernet port [MMLWhen the value Not involved

CLRBW[/PARA] = 0.If

PPP Link(ADD PPPLNK) MLPPP Group, PPP Link(ADD MPGRP) Fractional link(ADD FRALNK) IMA group(ADD IMAGRP) UNILNK(ADD UNILNK) LGC port(ADD IPLOGICPORT)

following rules:[PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] < [PARA]FWDCONGCLRBW[/PARA] < [PARA]MINBW[/PARA] or [PARA]FWDHORSVBW[/PARA] = [PARA]FWDCONGBW[/PARA] = [PARA]FWDCONGCLRBW[/PARA] = 0.If [PARA]BWADJ[/PARA] is set to be OFF,[PARA]FWDHORSVBW[/PARA],[PARA]FWDCONGBW[/PARA],[PARA]FWDCONGCLRBW[/PARA] must obey the following rules:[PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] <

DEG RNC Not involvedNone Cell None N (no impact on the UE in idle m70 RNC None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle m


N (no impact on the UE in idle mOFF Cell None N (No impact on the UE in idle m10 Cell None N (No impact on the UE in idle mNone Transmission r None Not involvedNone Transmission r None Not involved

When the value of [PARA]GCDF[/PARA] in [MML]ADD GPS[/MML] is selected as DEG, LATITUDE and LONGTITUDE should be set;When the value of [PARA]GCDF[/PARA] in [MML]ADD GPS[/MML] is selected as SEC, LATITUDESEC and LONGITUDESEC should be set.







None Cell This paramter is val N (No impact on the UE in idle m

None Cell None N (No impact on the UE in idle m512 RNC None N (no impact on the UE in idle m1000 RNC None. N (No impact on the UE in idle mMode0 RNC None N (No impact on the UE in idle mD50 RAB This parameter is r N (No impact on the UE in idle m5000 SCTP None N (No impact on the UE in idle m

None RNC None Not involved5 Cell None N (No impact on the UE in idle m

0

N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

Cell(ADD GSMCELL,ADD CELLHCS) RNC(ADD NRNCCELL)

This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to TRUE.

transimssion type is dual stack or Hybird IP, the

is UBR; transimssion type is Hybird IP, the parameter

Hybird IP, the parameter is AF33.When the interface type is is AF43; transimssion type is Hybird IP, the parameter

100 RNC None N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m15 RNC None N (No impact on the UE in idle m







RNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

None RNC When the value of Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC When the value of [ Not involved5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m

transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter





2 Cell None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mSingleHost NodeB None N (No impact on the UE in idle m

HO_ALGO_HCS_SPEED_ERNC None N (no impact on the UE in idle m-16 RNC None N (No impact on the UE in idle m-92 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mNone RNC When the value of [ Not involved100 RNC This paramter is va N (No impact on the UE in idle m30 Cell None N (No impact on the UE in idle mTRUE RNC None N (No impact on the UE in idle m50 RNC This paramter is va N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle m



100 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle m70 Cell None N (No impact on the UE in idle mNone RNC None Not involved0 Cell This paramter is val N (No impact on the UE in idle m

336 RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mNone RAB This parameter is as N (No impact on the UE in idle mD1 RAB This parameter is r N (No impact on the UE in idle mNone RNC None Not involvedE_F_DPCH_OFF Cell None N (No impact on the UE in idle mMIMO RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC This parameter is li N (No impact on the UE in idle mNone RNC This parameter is li N (No impact on the UE in idle mNone RNC 1.This parameter is N (No impact on the UE in idle mNone RNC 1.This parameter is N (No impact on the UE in idle m5 Cell This paramter is val N (No impact on the UE in idle m


This paramter is valid only when [PARA]AllocCodeMode[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]HsPdschMaxCodeNum[/PARA] >= [PARA]HsPdschMinCodeNum[/PARA].

1 Cell N (No impact on the UE in idle m2.5dB Cell None N (No impact on the UE in idle m

None

This paramter is val YNone RNC None Not involved4 Cell None N (No impact on the UE in idle mD100 RNC None N (No impact on the UE in idle mD50 RNC None N (No impact on the UE in idle mD100 RNC None N (No impact on the UE in idle mD50 RNC None N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle mD5760 RNC None N (no impact on the UE in idle mMBR NodeB None N (No impact on the UE in idle mBasedOnUECap RNC None N (No impact on the UE in idle m50 RNC This paramter is va N (No impact on the UE in idle mRATE_UP_AND_DOWN_ORNC This parameter is N (no impact on the UE in idle m100 Cell None N (No impact on the UE in idle m100 Cell None N (No impact on the UE in idle mD256 RNC This parameter can N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle m100 Cell None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m

This paramter is valid only when [PARA]AllocCodeMode[/PARA] is set to Automatic and the value of this parameter must satisfy the following relationship: [PARA]HsPdschMaxCodeNum[/PARA] >= [PARA]HsPdschMinCodeNum[/PARA].


100 RNC This paramter is va N (No impact on the UE in idle mNone RNC None Not involved


70 Cell N (No impact on the UE in idle m0 Cell This paramter is val N (No impact on the UE in idle m




RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

RNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m


The value of this parameter must satisfy the following relationship: [PARA]HsupAuRetrnsLdTrigThd[/PARA] >= [PARA]HsupAuRetrnsLdRelThd[/PARA].

The value of this parameter must satisfy the following relationship: [PARA]HsupAuRetrnsLdTrigThd[/PARA] >= [PARA]HsupAuRetrnsLdRelThd[/PARA].

transimssion type is dual stack or Hybird IP, the

is UBR; transimssion type is Hybird IP, the parameter


transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter transimssion type is dual stack or Hybird IP, the is UBR; transimssion type is Hybird IP, the parameter

None SRB None Not involvedNone SRB None Not involvedNone SRB None Not involved30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mNone RNC When the value of [ Not involved







RNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

70 RNC None N (No impact on the UE in idle mNone RNC When the value of [ Not involvedNone RNC None Not involved





0


0


8





8


8


8


4


6

None N (No impact on the UE in idle m6 RNC None N (No impact on the UE in idle m






4


Cell(ADD CELLINTERRATHOCOV,ADD CELLINTERFREQHOCOV) RNC(SET INTERRATHOCOV,SET INTERFREQHOCOV)

4



0



0


0

This parameter is v N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m720 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m64 IP Path When the value of [ N (no impact on services when theNone RNC None Not involvedNone Cell None N (No impact on the UE in idle mALLOWED Cell This paramter is val N (No impact on the UE in idle m



2 Cell None N(impact on Cell Selection and Re

2 Cell This parameter is v N(impact on Cell Selection and Re

0 Cell This parameter is va N(For the UE in idle mode, the larg

0 Cell This parameter is va N(For the UE in idle mode, the larg

127 Cell None N(impact on Cell Selection and Re127 Cell None N(impact on Cell Selection and ReD320 Cell This paramter is val N (No impact on the UE in idle m

SAAL None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m20000 RNC None N (No impact on the UE in idle m

UNI: 15000NNI: 500

None

None Not involvedNone IMA group None N (No impact on the UE in idle m

None

Not involvedIMA protocol Version 1.1 IMA group None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mDCH RNC None. N (No impact on the UE in idle m32 Cell This parameter must N (No impact on the UE in idle mNone RNC None Not involvedNone RNC The parameter must Not involvedNone RNC The parameter must Not involvedD32 RNC This parameter is re N (No impact on the UE in idle mNone RNC This parameter mus Not involvedNone RNC This parameter mus Not involved512 Cell This parameter must N (No impact on the UE in idle m

IMA group(ADD IMALNK,ADD IMAGRP) Fractional link(ADD FRALNK) RNC(RMV IMAGRP)

IMA group(RMV IMALNK,ADD IMALNK) IMA link(STR IMATST)

For AEUa, the sum of UNI/IMA/FRA can not exceed 32,for AOUa, the sum of UNI/IMA/FRA on an optical port can not exceed 63(E1)/84(T1)When the value of [PARA]PFMT[/PARA] in [MML]RST PFMM[/MML] is set to IMALNK, the value of IMALNKN can be set.

None RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone SRB None Not involvedNone RNC When the value of [ Y1500 SAAL When the value of [P N (No impact on the UE in idle mUIA1-1 RNC None N (No impact on the UE in idle m32 Cell This parameter mus N (No impact on the UE in idle m512 Cell This parameter mus N (No impact on the UE in idle mCSAMR_INTERFREQ:OFF,RNC None N (No impact on the UE in idle m-16 Cell None N (No impact on the UE in idle m

-14

The value of this pa N (No impact on the UE in idle m


-95



-12



-92

The value of this pa N (No impact on the UE in idle m60 RNC None N (No impact on the UE in idle m

None N (No impact on the UE in idle mD3 RNC None N (No impact on the UE in idle mINTER_FREQ_COV Cell None N (No impact on the UE in idle m


D4~D6, the recommended value is D5;for middle speed(50km/h):Range is D3~D4, the recommended value is D4;for high speed(120km/h):Range is D2~D4, the recommended value is D2;universal value:Range is D3~D6, the recommended value is D3.(SET INTERFREQHOCOV,ADD CELLINTERFREQHOCOV) D3(SET INTERFREQHONCOV,ADD

Cell(ADD CELLINTERFREQHONCOV,ADD CELLINTERFREQHOCOV) RNC(SET INTERFREQHONCOV,SET INTERFREQHOCOV)

-14

This parameter is N (No impact on the UE in idle m


-95



-12



-92

This parameter is N (No impact on the UE in idle mINTER_FREQ_AND_INTE Cell None N (No impact on the UE in idle mBOTH RNC None N (No impact on the UE in idle m

60

None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle mOFF Sub System None N (No impact on the UE in idle m


Cell(ADD CELLINTERFREQHONCOV,ADD CELLINTERFREQHOCOV) RNC(SET INTERFREQHONCOV,SET INTERFREQHOCOV)

-16 RNC None N (No impact on the UE in idle m

-14



-95



-12



-92

The value of this pa N (No impact on the UE in idle mSIMINTERFREQRAT Cell None N (No impact on the UE in idle m



PERIODICAL_REPORTING


PERIODICAL_REPORTIN RNC None N (No impact on the UE in idle m255 Cell None N(impact on Cell Selection and Re45 RNC None N (No impact on the UE in idle mNO RNC None N (No impact on the UE in idle mNO RNC None N (No impact on the UE in idle mCSAMR_INTERRAT:OFF RNC This parameter is v N (No impact on the UE in idle m

-14



-100



-12


-97

The value of this pa N (No impact on the UE in idle m60 RNC This parameter is v N (No impact on the UE in idle m



D3


Cell(ADD CELLINTERRATHONCOV,ADD CELLINTERRATHOCOV) RNC(SET INTERRATHONCOV,SET INTERRATHOCOV)

D3 Cell None N (No impact on the UE in idle m

16

None N (No impact on the UE in idle mYES RNC This parameter is Va N (no impact on the UE in idle m


21 RNC None N (No impact on the UE in idle mDRD RNC This parameter is Va N (no impact on the UE in idle m

-15



-110



-13


-107




60


Cell(ADD CELLINTERRATHONCOV,ADD CELLINTERRATHOCOV) RNC(SET INTERRATHONCOV,SET INTERRATHOCOV)

3 Cell None N (No impact on the UE in idle mOFF Sub System None N (No impact on the UE in idle m

21



D1000



D1000 Cell This parameter is v N (No impact on the UE in idle m3 Cell None N (No impact on the UE in idle m3 Cell None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m

0



0


-15




-110



-13


-107





PERIODICAL_REPORTING


PERIODICAL_REPORTIN Cell None N (No impact on the UE in idle m255 Cell None N(impact on Cell Selection and Re45 RNC This parameter is v N (No impact on the UE in idle m1 RNC None Y

-24



-115



D3 Cell None N (No impact on the UE in idle m

1800 RNC N (No impact on the UE in idle m

REQUIRE Cell None N (No impact on the UE in idle m

CPICH_EC/NO

None N (No impact on the UE in idle mOFF Sub System None N (No impact on the UE in idle m12 RNC This parameter is Va N (no impact on the UE in idle m

icMeas[/PARA];When [PARA]ChoiceRprtUnitForDlBasicMeas[/


6



The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSNVP[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSNVP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

6



The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSVP[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSVP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

6

N (No impact on the UE in idle m18 RNC This parameter is Va N (no impact on the UE in idle m


The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1APS[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BPS[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

12



The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSNVP[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSNVP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

12



The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1ACSVP[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BCSVP[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

12

N (No impact on the UE in idle m60000 RNC None N (No impact on the UE in idle mNone IPOA When the value of [ N (No impact on the UE in idle m


The value of this parameter must satisfy the following relationship: ([PARA]IntraRelThdFor1APS[/PARA] - [PARA]Hystfor1A[/PARA] / 2) < ([PARA]IntraRelThdFor1BPS[/PARA] + [PARA]Hystfor1B[/PARA] / 2).

None

Not involvedNone RNC None Not involvedNone Ethernet port None Not involvedNone IP Path The [PARA]IPADDR[/ Not involvedUDP/IP_HC PPP Link None Not involvedUDP/IP_HC MLPPP Group, None N (No impact on the UE in idle mNone Ethernet port None Not involved

None

None Not involvedNone RNC When the value of N (No impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mNone NodeB The parameter should N (No impact on the UE in idle mNone Ethernet port When the value of [ Not involved

Ethernet port(ADD ETHIP) RNC(ADD IPOAPVC,ADD DEVIP) Global(ACT VCLCC)

In [MML]ADD IPOAPVC[/MML] The local [IP address] and the [Peer IP address] must be in the same network segment. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to IPOAPVC, the IP address should be set.

Ethernet port(ADD ETHTRKIP) RNC(RMV ETHTRKIP)

None

When the value of [ Not involvedNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNOT_BARRED Cell None N (No impact on the UE in idle mNO Ethernet port None Not involvedNone Transmission r None Not involved

FALSE NodeB None. N (No impact on the UE in idle m

Ethernet port(ADD ETHTRKIP) RNC(RMV ETHTRKIP)

YES RNC None Not involvedNone IP path When the value of [ Not involvedNone Adjacent Node When the value of Not involvedNone IP Path None Not involved


1 RNC None N (No impact on the UE in idle m1 NodeB None N (No impact on the UE in idle m1 NodeB None N (No impact on the UE in idle m300 RNC None N (No impact on the UE in idle m300 RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mTRUE RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mNone RAB None Not involved16 byte Corresponding o None YSBS 155 Corresponding o When the value of [P Y16 byte Corresponding o None YSBS 155 Corresponding o When the value of [P Y16 byte Corresponding o None YSBS 155 Corresponding o When the value of [P Y16 byte Corresponding o None YSBS 155 Corresponding o When the value of [P Y

None Optical Port None Not involved



None Optical Port None Not involvedNone Port None Not involved

SAAL None N (No impact on the UE in idle mNone Ethernet port When the value of Not involvedD1 RNC None N (No impact on the UE in idle mON RNC None N (No impact on the UE in idle m

UNI: 2000NNI: 100

None

The value of this p Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m2 LGC port When the value of [ N (No impact on the UE in idle m4 LGC port When the value of [ N (No impact on the UE in idle m25 LGC port When the value of [ N (No impact on the UE in idle m3 LGC port When the value of [ N (No impact on the UE in idle m8 LGC port When the value of [ N (No impact on the UE in idle mNone RNC None Not involved


RNC(ADD LASNAMAP,ADD CZ,ADD NRNCCELL,ADD SAC,ADD QUICKCELLSETUP,ADD CELLSETUP,ADD RAC,ADD LAC) Cell(ADD GSMCELL)

UserNumber


35


100

N (No impact on the UE in idle m10 RNC This parameter is v N (No impact on the UE in idle m10 RNC This parameter is va N (No impact on the UE in idle m

OFF

If this parameter N (No impact on the UE in idle m

OFF

If this parameter N (No impact on the UE in idle m30 RNC This parameter is va N (No impact on the UE in idle m


None. If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command.


and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that


and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that



RNC None N (No impact on the UE in idle mFALSE Cell None N (No impact on the UE in idle m13 Cell None N (No impact on the UE in idle mIUBLDR RNC [PARA]LdrFirstPri[/ N (No impact on the UE in idle mUULDR RNC [PARA]LdrFirstPri[/ N (No impact on the UE in idle m


CREDITLDR RNC [PARA]LdrFirstPri[/ N (No impact on the UE in idle mCODELDR RNC [PARA]LdrFirstPri[/ N (No impact on the UE in idle m

NODEB_CREDIT_LDR_SWITCH:disabled.LCG_CREDIT_LDR_SWITCH:disabled.LC_CREDIT_LDR_SWITCH:disabled.

When [PARA]ChoiceRprtUnitForUlBasicMeas[/

None RNC Not involvedNone Adjacent Node The load EQ table i N (No impact on the UE in idle mNone Adjacent Node The load EQ table i N (No impact on the UE in idle mNone Adjacent Node The load EQ table i N (No impact on the UE in idle m

None

Not involved0 Ethernet port None Not involvedON RNC None Not involvedNone RNC When the value of Not involvedNone RNC When the value of [ N (No impact on the UE in idle m

1.The parameter is used in command [MML]ADD ADJMAP [/MML] as loadeq table index for gold,silver,and bronze users.2.When TRANST of ADJNODE is dual stack or hybird IP,loadeq can be added.

RNC(ADD M3LE) M3UA(ADD M3DE)

This is a parameter in [MML]ADD OPC[/MML]. The [PARA]LENO[/PARA] field in [MML]ADD M3LE[/MML]

None Board None Not involvedNone Board None Not involvedNone RNC When the value of [ Not involvedD8 RNC This paramter is val N (No impact on the UE in idle mD64 RNC The low activity ra N (no impact on the UE in idle mNone SRB None Not involved

None E1T1 link When the value of Not involved

None


M3UA_MASTER_MOD RNC None Not involved

B1111 RNC None Not involved

E1_CRC4_MULTI_FRAMEE1T1 link When the value of Not involved

None

None Not involved

E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) E1T1 Link(STR E1T1TST) E1T1 link(SET E1T1) Optical Port(SET COPTLNK)

[PARA]LNKN[/PARA] is 0 to 31. When the value of [PARA]BT[/PARA] in [MML]LOP E1T1[/MML] is set to AOUa or POUa, the value range of [PARA]LNKN[/PARA] is 0 to 167. When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] is set to AEUa or PEUa, the link number is required and the value range is from 0 to 31.When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] is set to AOUa or POUa, the link number is required and the value range is from 0 to 167. When the value of [PARA]LS[/PARA] in [MML]SET E1T1[/MML] is set to SINGLE,the value of [PARA]LNKN[/PARA] should be set.

Communication Link(ACT VCLCC) VCL(LOP VCL)

None RNC The parameter must no Not involvedNone MLPPP Group, None N (No impact on the UE in idle mNone Ethernet port None Not involved

None NodeB

None YNone SCTP None YNone SCTP None YNone SCTP When the value of [ YNone RNC None Not involvedNone SCTP This parameter de YNone SCTP When the value of [ YNone SCTP When the value of [ YNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

None

None Y1 LGC port When the value of [ N (No impact on the UE in idle mNone RNC When the value of [ Not involved

None

When the value of [ Not involved

E1/T1 link(SET E1T1LOP) Loopback optical port(SET OPTLOP)

LGC port(ADD IPLOGICPORT) IMA group(RMV IPLOGICPORT) IP Path(ADD IPPATH)

None LGC port None Transmission Resource ManagemeNone IP Path When the value of [ YNone LGC port None Transmission Resource Manageme

ALL

None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC When the value of [ Not involvedNone RNC When the value of [ Not involvedNone RNC None Not involved2905 The SCTP links None Y1 RNC None N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC This parameter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

None

None Not involved

SAAL NodeB When [PARA]CARRYLN Not involved


E1T1 link(SET E1T1) Optical Port(SET COPTLNK)

Ethernet port(PING MAC,ACT ETHCC,ADD ETHMEP,ADD ETHMA) RNC(TRC MAC)

MAP_HSUPA_TTI_2MS_SRNC None N (no impact on the UE in idle mNone UE MASK needs to be s Not involvedNone RNC None Not involvedNone PPP Link None Not involvedNone MLPPP Group, None N (No impact on the UE in idle mNone Ethernet port None Not involvedNone RNC None N (No impact on the UE in idle mNone Ethernet port None Not involved

This paramter is va N(impact on Cell Selection and ReFALSE RNC None N (No impact on the UE in idle m

24(ADD CELLSELRESEL) None(ADD NRNCCELL)



None Cell Valid when [PARA]C N (no impact on the UE in idle mWhen the application type i SCTP The value to be se N (No impact on the UE in idle m1 RNC None N (No impact on the UE in idle m1 RNC None N (No impact on the UE in idle m

None RAB None. N (No impact on the UE in idle m

None LGC port N (No impact on the UE in idle m

1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set.2.[PARA]MINBW[/PARA] must be less than [PARA]MAXBW[/PARA].


100 RNC N (No impact on the UE in idle m4 SAAL None N (No impact on the UE in idle m

3

None N (No impact on the UE in idle mD15 Transport chan None Not involved49 RNC None N (no impact on the UE in idle m3 RNC The value of this N (No impact on the UE in idle mNone RAB This parameter is r N (No impact on the UE in idle m48 Cell None N (No impact on the UE in idle m10 Transport chan None N (No impact on the UE in idle m270 IP Path When the value of [ N (no impact on the UE in connec16 RNC None N (no impact on the UE in idle m64 Cell None N (No impact on the UE in idle m20 Cell None N (No impact on the UE in idle m

The value of this parameter must satisfy the following relationship:[PARA]MaxCAPSLowLoad[/PARA] > [PARA]MaxCAPSMidLoad[/PARA] > [PARA]SharingOutCAPSMidLoad[/PARA].




256 PPP Link [PARA]MAXMFLEN[/P YNone MLPPP Group, When the value of [ N (No impact on the UE in idle m1 NodeB None. N (No impact on the UE in idle m0 SAAL When the value of [P N (No impact on the UE in idle mWhen the application type i SCTP The value to be se N (No impact on the UE in idle m346 Cell None N (No impact on the UE in idle m

SAAL None N (No impact on the UE in idle m

5 RNC N (No impact on the UE in idle m64 PPP Link [PARA]MAXMFLEN[/P Y

None MPGRP, PPPL N (No impact on the UE in idle m75 Cell None N (No impact on the UE in idle m12 RNC None Not involved


24 Cell None N (No impact on the UE in idle m24 Cell None N (No impact on the UE in idle m

UNI: 25NNI: 500

The value of this parameter must be set to meet the following conditions: 100 x [PARA]MaxQueueTimeLen[/PARA] > [PARA]PollTimerLen[/PARA].

1.When the value of [PARA]PPPMUX[/PARA] in [MML]ADD MPGRP[/MML] is set to ENABLE, this parameter should be set.2.[PARA]MAXMFLEN[/PARA] must not be less than [PARA]MAXSFLEN[/PARA]*2+8.

24 Cell None N (No impact on the UE in idle m24 Cell None N (No impact on the UE in idle m1 Cell None N (No impact on the UE in idle mFALSE Cell None N (No impact on the UE in idle mFALSE Cell None N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle mNone RNC None Not involvedNone Ethernet port When the value of [ Not involvedNone RNC Only valid to the slo Not involvedNone RNC None Not involved100 RNC This paramter is va N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mCOMMON Cell None Not involved1 Cell None N (No impact on the UE in idle m2 RNC This parameter is us N (No impact on the UE in idle mOFF RNC This parameter is v N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involvedTRUE Cell None N (No impact on the UE in idle m1 Cell None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mD16 RNC None N (No impact on the UE in idle m

None

None N (No impact on the UE in idle mNone RNC None Not involvedON RNC None N (No impact on the UE in idle mNone RNC None Not involved

PTM


Cell(ADD CELLMBMSSA) RNC(ADD SAMBMSPARA,ADD MBMSSA)

Cell(ADD CELLMBMSPARA) RNC(SET RNCMBMSPARA,ADD SAMBMSPARA)

1000 SAALLNK/AAL2 When the value of [ Not involved

None

None Not involvedNone RNC None N (No impact on the UE in idle mNone MLPPP Group When the value of [ N (No impact on the UE in idle mNone SAALLNK/AAL2 When the value of [ Not involved



AUTO




None Ethernet port When the value of [ Not involvedLONG MLPPP Group, None N (No impact on the UE in idle mNone Cell None Not involved-7 Cell None N (No impact on the UE in idle mFALSE Cell This paramter is v N (No impact on the UE in idle mNone LGC port When the value of [ N (No impact on the UE in idle mD14 Transport chan None Not involvedSF8 NodeB None. N (No impact on the UE in idle m21 RNC None N (no impact on the UE in idle m

RNC(ADD IMSISNAMAP,ADD LASNAMAP,ADD CNOPERATOR) Cell(ADD GSMCELL)


None

Valid when [PARA]Ch N (no impact on the UE in idle m

None


None


None RNC N (No impact on the UE in idle m

None RNC This paramter is val N (No impact on the UE in idle m






None

Valid when [PARA]Ch N (no impact on the UE in idle m1 IMA group None N (No impact on the UE in idle m




[PARA]OlcPeriodTimerLen[/PARA]/2 . This paramter is valid only when

[PARA]OlcPeriodTimerLen[/PARA]/2 . This paramter is valid only when


313 Cell N (No impact on the UE in idle m30 Ethernet port When the value of [ Not involved30 Ethernet port When the value of [ Not involvedSF4 NodeB None. N (No impact on the UE in idle m8 Transport chan None Y

None

None Not involvedNone RNC None N (No impact on the UE in idle m

The value of this parameter must satisfy the following relationship:[PARA]MinPCPICHPower[/PARA] <= [PARA]MaxPCPICHPower[/PARA].

RNC(ADD IMSISNAMAP,ADD LASNAMAP,ADD CNOPERATOR) Cell(ADD GSMCELL)

COMM_MOCN_NRI_GLOBRNC When [PARA]MOCNSup N (No impact on the UE in idle mNO RNC None N (No impact on the UE in idle mNone Port None YAUTO RNC None N (No impact on the UE in idle mNone Ethernet port When the value of [ Not involved

None SCTP None YOFF RNC None Not involved

10000 RNC None N (No impact on the UE in idle m10000 RNC None N (No impact on the UE in idle m1000 RAB This parameter is r N (No impact on the UE in idle m60 RNC None N (no impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle m

None

None N (No impact on the UE in idle mMPS_NEUTRAL SAAL When the value of [P Not involvedMCPPP MLPPP Group, None N (No impact on the UE in idle mNone Board None Not involvedD12 RNC None N (no impact on the UE in idle m

OFF Cell None N (No impact on the UE in idle mOFF RNC None N (no impact on the UE in idle m

RNC None N (no impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mNone Cell When the value of [P N (The UE in idle mode may receivOFF Cell None N (The UE in idle mode may receivNone MSP protect gr None Not involved

MLPPP Group, MLPPP Link(ADD MPGRP) RNC(ADD MPLNK,RMV MPGRP)

TRAFFIC_AMR: not selectedTRAFFIC_VP: not selectedTRAFFIC_BE: not selectedTRAFFIC_OTHER: not selected



80

The value of this pa Not involved

50

The value of this pa Not involvedD16 RNC None N (No impact on the UE in idle mFALSE RNC None N (No impact on the UE in idle m


The value of this parameter must satisfy the following relationship:[PARA]MtchMaxPwr[/PARA] > [PARA]MtchRsvPwr[/PARA] .

The value of this parameter must satisfy the following relationship:[PARA]MtchMaxSf[/PARA] > [PARA]MtchRsvSf[/PARA] .

Cell(ADD CELLMBMSFACH) RNC(SET MBMSFACH)

Cell(ADD CELLMBMSFACH) RNC(SET MBMSFACH)

The value of this parameter must satisfy the following relationship:[PARA]MtchMaxPwr[/PARA] > [PARA]MtchRsvPwr[/PARA].


MET RNC Not involvedNone Cell None N (no impact on the UE in idle m

1500

None Y


The value of this parameter must satisfy the following relationship:[PARA]MtchMaxSf[/PARA] > [PARA]MtchRsvSf[/PARA] .

When the value of [PARA]MTRLGY[/PARA] in [MML]ADD GPS[/MML] is selected as MET, the ALTITUDE should be set;When the value of [PARA]MTRLGY[/PARA] in [MML]ADD GPS[/MML] is selected as IMP, the ALTITUDEIMP should be set.

Ethernet port(SET ETHPORT) SCTP(ADD SCTPLNK)

1000(ADD PPPLNK) None(ADD MPGRP)


None Ethernet port When the value of [ Not involved100 SAAL When the value of [P N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m1 RNC None N (No impact on the UE in idle m


D50 RNC None N (No impact on the UE in idle mD1 RNC None N (No impact on the UE in idle mD1 RNC None N (No impact on the UE in idle m

None


RNC(ADD OPC,ADD N7DPC,ADD M3RT,ADD M3LNK,ADD M3LKS,ADD M3LE,ADD MTP3LKS,ADD MTP3RT) Adjacent Node(ADD ADJNODE) MTP3(ADD MTP3LNK) M3UA(ADD M3DE)

0 Transport chan Y

0 Transport chan Y20 RNC None N (No impact on the UE in idle m58080 The SCTP links None YNone RNC When the value of N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle m20 RNC None N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mNone RNC When the value of N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle m

The value of this parameter must be set to meet the following conditions:[PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA].

The value of this parameter must be set to meet the following conditions:[PARA]NB01max[/PARA] >= [PARA]NB01min[/PARA].

None Cell None N (No impact on the UE in idle mNone Cell If the Downlink CAC a N (No impact on the UE in idle m

None Cell PUC should not be ad N (No impact on the UE in idle m

NBM_LDC_MATCH_UE_ Cell None N (No impact on the UE in idle mALGORITHM_DEPEND_OCell None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle mPRIORITY2&PRIORITY3&RNC None N (No impact on the UE in idle mALGORITHM_OFF RNC None N (No impact on the UE in idle m60 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m

None Cell

None N (No impact on the UE in idle m20 Cell This paramter is val N (No impact on the UE in idle m

None RNC

None Not involvedNC0 Cell None N (No impact on the UE in idle m

4

None N (No impact on the UE in idle mON RNC None N (No impact on the UE in idle m8 Cell This paramter is va N(impact on Cell Selection and ReDIRECT_CONNECT RNC None Y

None

For AEUa/AOUa/UOIa_A Not involvedNone RNC None Not involved

15

N (No impact on the UE in idle mNone RNC This parameter depend Not involved5 Cell None N (No impact on the UE in idle mMODE2 RNC NMO needs to be se N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m


IP Route(ADD IPRT) RNC(ADD IPRTBIND)

Cell(ADD CELLHCSHO) RNC(SET HCSHO)

The value of the parameter must satisfy the function below: [PARA]NFastSpdEst[/PARA]*[PARA]TSlowSpdEst[/PARA] >= [PARA]NSlowSpdEst[/PARA]*[PARA]TFastSpdEst[/PARA].

None NodeB None Not involved3840 NodeB None N (No impact on the UE in idle m3840 NodeB None N (No impact on the UE in idle m



None

Not involvedNone NodeB None Not involvedNone Cell None N (No impact on the UE in idle mNone NodeB None Not involved

Adjacent Node(ADD ADJNODE) RNC(STR NODEBDETECT,ADD NODEBESN,ADD NODEBIP)

When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, this parameter is valid. When the value of [PARA]SelectType[/PARA] in [MML]STR NODEBDETECT[/MML] is set to SINGLE, this parameter is valid.

None NodeB None N (No impact on the UE in idle mNone NodeB None Not involved

None

The value of this p Not involvedR7 NodeB None N (No impact on the UE in idle m30 NodeB None Not involvedPERIOD NodeB None Not involvedNone NodeB None Not involvedNone NodeB None Not involvedNone NodeB None Not involvedNORMAL NodeB None N (No impact on the UE in idle mNone NodeB None N (No impact on the UE in idle mNone NodeB None N (No impact on the UE in idle mNone Adjacent Node None Not involvedPICO_TYPE1 NodeB None. N (No impact on the UE in idle mNOT_CONFIGURED Cell None N(impact on Cell Selection and Re0 Cell None N (No impact on the UE in idle m50 Cell None N (No impact on the UE in idle m

NodeB(ADD NODEBOLC,ADD IPDL,ADD NODEBALGOPARA,ADD NODEBLDR,ADD NODEB) (ADD CCP,ADD NCP,ADD LOCELL,ADD NBNODESYNCMONPARA) Cell(ADD QUICKCELLSETUP,ADD CELLSETUP)

None Cell

N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle m

FALSE Cell


3

None N (No impact on the UE in idle mNone RNC None Not involved

None RNC

None Not involvedNone RNC None Y

This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE. This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE; Also the value of this parameter must be different to the others.


None

Not involved

3

N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m2 RNC When [PARA]DsacAutoS N (No impact on the UE in idle m

None Not involved

Services carried on the network element with the specific ATM address.(ADD AAL2RT) NodeB(ADD NODEB)

1. If the original ATM address of the NodeB is configured with the route through [MML]ADD AAL2RT[/MML], the parameter cannot be modified.2. If the original ATM address of the NodeB is configured with the route in the AAL2RT table, the parameter cannot be modified.



0(ADD IPLOGICPORT,ADD MPGRP,ADD PPPLNK) None(SET ETHPORT)

OMCH(ADD PPPLNK) Ethernet port(SET ETHPORT) MLPPP Group, PPP Link(ADD MPGRP) LGC port(ADD IPLOGICPORT)

None Port Queue [PARA]OAMFLOWDSCP N (No impact on the UE in idle mNone Port Queue None N (No impact on the UE in idle m4 Cell None N (No impact on the UE in idle m-4 Cell None N (No impact on the UE in idle m4 Cell None N (No impact on the UE in idle m-4 Cell None N (No impact on the UE in idle m2 Cell None N (No impact on the UE in idle m-2 Cell None N (No impact on the UE in idle m

3000 RNC

N (No impact on the UE in idle mNone RNC None Not involvedNone RAB None. N (No impact on the UE in idle m

nitForDlBasicMeas[/PARA] are set to MIN,the value of this parameter must satisfy the following relationship:[PARA]OlcPeriodTimerLen[/PARA] > 2 x 60 x 1000 x [PARA]MinForUlBasicMeas[/PARA];[PARA]OlcPeriodTimerLen[/PARA] > 2 x 60 x 1000 x [PARA]MinForDlBasicMeas[/PARA];When [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA] and [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] are set to TEN_MSEC,the value of this parameter must satisfy the following relationship:[PARA]OlcPeriodTimerLen[/PARA] > 2 x [PARA]TenMsecForUlBasicMeas[/PARA];[PARA]OlcPeriodTi

None Optical Port None Not involvedR5_PosData_SWITCH RNC None N (no impact on the UE in idle mNone Corresponding o When the value of [ Not involvedNone Cell Valid when [PARA]C N (no impact on the UE in idle mStep_by_Step RNC None N (No impact on the UE in idle mACTIVE Cell Valid when [PARA]C N (no impact on the UE in idle mUE_ASSISTED RNC None N (no impact on the UE in idle mNOT_FORBIDDEN RNC This parameter is N (No impact on the UE in idle mLOCAL AAL2 Path None N (No impact on the UE in idle mYES Services carrie None N (no impact on the UE in connecDISABLED IP Path None N (no impact on the UE in connecNone AAL2 Path When the value of N (No impact on the UE in idle m

None

When the value of [ Not involved

None

None Not involvedQOS IP Path When the value of [ Not involvedNone RNC When the value of N (No impact on the UE in idle m-20 Transport chan None N (Impact on page message receiv

330 Cell N (Impact on pilot message receiv


AAL2 Path(ADD AAL2PATH) AAL2PATH(ACT VCLCC)

IP Path(ADD IPPATHBIND,ADD IPPATH) IP path(ACT IPPM)

2. To modify the PCPICH power, the intra-frequency load balance algorithm of

None SAALLNK/AAL2 Not involved

PC_AMR_MODE_INDUCE_RNC None N (no impact on the UE in idle m5 RNC None N (No impact on the UE in idle m

1.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to CBR or RTVBR or NRTVBR and [PARA]UT[/PARA] is selected, this parameter should be set.2.[PARA]PCR[/PARA] must be larger than [PARA]SCR[/PARA].

1000 Ethernet port None Not involved


None Cell None N (No impact on the UE in idle m

None MLPPP Group, None N (No impact on the UE in idle mNone Ethernet port None Not involvedNone SCTP None YNone SCTP None YNone IPOA When the value of N (No impact on the UE in idle mNone RNC None Not involvedNone Global When the value of [ Not involvedNone IP Path [PARA]IPADDR[/PAR Not involved

Invalid Cell None N (No impact on the UE in idle m

255.255.255.255 IP Path ([PARA]IPADDR[/PAR Not involvedNone NodeB None N (No impact on the UE in idle mNone SCTP None YNone NodeB None N (No impact on the UE in idle mNone IPoA PVC Only when [PARA]PEER N (No impact on the UE in idle m



30 Cell None N (No impact on the UE in idle mD4000 RAB None. N (No impact on the UE in idle mD4000 RAB None. N (No impact on the UE in idle m

1 RAB This parameter is r N (No impact on the UE in idle m1 RAB This parameter is r N (No impact on the UE in idle m5 IP Path When the value of [ N (no impact on services when the

1


4


1


4


D16







D16


D64



None Physical chann This parameter is v N (Impact on random access for U

Enable

None YNone IP path When the value of [ Not involvedNone Board 1.The phb of the traf Not involved




None Not involvedNone Cell None Not involved10 Physical chann None Not involvedV36 Physical chann None Not involved-7 Cell None N (Impact on page message receivNone Ethernet port None Not involved10 RNC None Y128 RNC None Y128 Ethernet port None Not involved56 Ethernet port None Not involved128 Ethernet port None Not involved

None(ADD FACH,ADD PRACHACTOASCMAP,ADD PCH,ADD SCCPCHTFC,ADD PCCPCH,ADD SCCPCHBASIC) 6(ADD AICH) 4(ADD PRACHBASIC,ADD PRACHTFC,ADD PRACHASC,ADD PRACHSLOTFORMAT,ADD RACH) 2(ADD PCPICH) 8(ADD PICH) 0(ADD PSCH) 1(ADD SSCH)

Physical channel(ADD SSCH,ADD PSCH,ADD PRACHBASIC,ADD PRACHTFC,ADD FACH,ADD PICH,ADD PRACHASC,ADD PRACHSLOTFORMAT,ADD PCH,ADD SCCPCHTFC,ADD PCPICH,ADD RACH,ADD AICH,ADD PCCPCH,ADD SCCPCHBASIC) Cell(ADD PRACHACTOASCMAP)

None RNC

Not involved

None RNC

Not involved10 LGC port When the value of [ N (No impact on the UE in idle m30 LGC port When the value of [ N (No impact on the UE in idle m1 IP path If the Ip path is c N (No impact on the UE in idle m

None Not involvedNone RNC None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone RNC None YNone Ethernet port When the value of [ Not involvedNone SRB None Not involvedNone RNC None Not involvedNone RNC None Not involved


The value of this parameter must satisfy the following relationship:[PARA]PlmnValTagMax[/PARA] > [PARA]PlmnValTagMin[/PARA].

The value of this parameter must satisfy the following relationship:[PARA]PlmnValTagMax[/PARA] > [PARA]PlmnValTagMin[/PARA].

port(SET OPTLOP) Optical

[MML]STR IPCHK[/MML] is set to SBFD or ARP, the

The value of this parameter must be set to meet the following conditions: 100 x [PARA]MaxQueueTimeLen[/PARA] > [PARA]PollTimerLen[/PARA].

SAAL None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None N (No impact on the UE in idle mNone Ethernet port None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedIn signaling transmission m Physical chann None Not involved2 Physical chann None N (Impact on random access for UNone RNC When the value of [ N (No impact on the UE in idle mNone LGC port None Not involved

None

The parameter [PARA Not involved

Enable

None Not involvedNone RNC When the value of N (No impact on the UE in idle m4 Physical chann None Not involved

UNI: 750NNI: 100

PPP Link(ADD PPPLNK) (RST MPLNK,RST PPPLNK) MLPPP Link(ADD MPLNK) RNC(RMV MPLNK,RMV PPPLNK)


D500

This parameter is v N (No impact on the UE in idle mD500 Cell None N (No impact on the UE in idle m20 Physical chann None N (Impact on random access for USIGNATURE0, SIGNATURPhysical chann None N (Impact on random access for UOFF RNC None N (No impact on the UE in idle mON RNC None N (No impact on the UE in idle mNone IP Route None Not involved

0


0

None N (No impact on the UE in idle mHIGH Cell None Not involvedARP RNC None N (No impact on the UE in idle m1 RNC None. N (No impact on the UE in idle m1 RNC None. N (No impact on the UE in idle m1 RNC None. N (No impact on the UE in idle m1 RNC None. N (No impact on the UE in idle m1 RNC None. N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m


MTP3(ADD MTP3LNK) Priority for the link(ADD M3LNK)

RNC(ADD MTP3RT) The route to the specific M3DE decides the sequence.(ADD M3RT)

None RNC None N (No impact on the UE in idle m

ITUT RNC None Not involved20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m


must be 0 at the same time. 2. For the detection at the same time. 2. For the detection at the same time. 2. For the detection must be 0 at the same time. 2. For the detection

1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.

None Corresponding o When the value of [P Not involvedCORRM_SRNSR_PSBE_R RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m-50 Physical chann None N (Impact on network searching o70 RNC None N (No impact on the UE in idle m



None Cell

None Y30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

60

N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m20 RNC N (No impact on the UE in idle m

When the interface type is Iur, transmission type is is Hybird IP, the parameter is LQAF13.When the interface type is



This parameter is valid when [PARA]NcovHoOn2GldInd[/PARA] in [MML]SET INTERRATHONCOV[/MML] is set to ON. This parameter is valid when [PARA]NcovHoOn2GldInd[/PARA] is set to ON.

must be 0 at the same time. 2. For the detection at the same time.2. For the detection at the same time. 2. For the detection must be 0 at the same time. 2. For the detection

20 RNC N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle m900 RNC PsInfoUpdTmr needs N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m

RNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle mRNC When the value of [ N (No impact on the UE in idle m

30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mSUPP_NONE RNC None N (No impact on the UE in idle mNone RNC PSNRILength needs t N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m200 RNC None N (No impact on the UE in idle mTRUE RNC When [PARA]DsacAutoS N (No impact on the UE in idle mOFF Cell None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m



1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time.

When the interface type is Iur, transmission type is is Hybird IP, the parameter is LQAF33.When the interface type is When the interface type is Iur, transmission type is is Hybird IP, the parameter is LQAF33.When the interface type is When the interface type is Iur, transmission type is is Hybird IP, the parameter is LQAF33.When the interface type is


PS_BE_EXTRA_LOW_RATRNC PS_RAB_DOWNSIZING N (no impact on the UE in idle mNone RNC None Not involvedNone SRB None Not involvedNone RNC When the value of [ N (No impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle mON RNC None N (No impact on the UE in idle mOFF RNC None N (No impact on the UE in idle mON RNC None N (No impact on the UE in idle mNone Ethernet port When the value of [ N (No impact on the UE in idle m



10 RNC None N (No impact on the UE in idle mALGORITHM1 RNC None N (No impact on the UE in idle mNone Port Queue From [PARA]Q0MIND N (No impact on the UE in idle mNone Port Queue From [PARA]Q0MIND N (No impact on the UE in idle mNone Port Queue From [PARA]Q0MIND N (No impact on the UE in idle mNone Port Queue From [PARA]Q0MIND N (No impact on the UE in idle mNone Port Queue From [PARA]Q0MIND N (No impact on the UE in idle m

icMeas[/PARA];When [PARA]ChoiceRprtUnitForDlBasicMeas[/

CS2 Adjacent Node When the value of N (No impact on the UE in idle m

20

N (No impact on the UE in idle m255 Cell None N(impact on Cell Selection and Re255 Cell None N(impact on Cell Selection and Re255 Cell None N(impact on Cell Selection and Re255 Cell None N(impact on Cell Selection and Re0 Cell None N(For the UE in idle mode, the lar

This paramter is val N(impact on Cell Selection and ReFALSE RNC None N (For the UE in idle mode, the p-50 Cell None N(For the UE in idle mode, the larg

This paramter is val N(impact on Cell Selection and Re

FALSE

This paramter is val N(impact on Cell Selection and ReFALSE RNC None N (For the UE in idle mode, the pCPICH_ECNO Cell None N(impact on Cell Selection and ReOFF RNC None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m


This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to USED. This paramter is valid only when [PARA]UseOfHcs[/PARA] is set to TRUE.

-18(ADD CELLSELRESEL) None(ADD NRNCCELL)


-58(ADD CELLSELRESEL) None(ADD NRNCCELL)



None

None. N (No impact on the UE in idle m5 RNC None N (no impact on the UE in idle m

None

This paramter is val Not involvedSELECT ALL Physical chann None N (Impact on random access for U30000 RNC None N (No impact on the UE in idle mNO RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m120000 RNC None N (No impact on the UE in idle m

RAB(ADD TYPRABOLPC) (ADD TYPRABBASIC,ADD TYPRABHSPA,ADD TYPRABRLC,ADD TYPRABDCCCMC) RNC(ADD TYPRABQUALITYMEAS)

RNC(ADD NRNCCELL,ADD QUICKCELLSETUP,ADD CELLSETUP,ADD RAC) Cell(ADD GSMCELL)

None Not involved5000 Cell None N (No impact on the UE in idle m68 Cell None N (No impact on the UE in idle m3000 Cell None N (No impact on the UE in idle m


None RNC None Not involved5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m96 LGC port When the value of [ N (No impact on the UE in idle m6 RNC The value of this p N (No impact on the UE in idle m130 Cell None N (No impact on the UE in idle m

30 LGC port N (No impact on the UE in idle mNone Board None Not involved


230(ADD PCH,ADD FACH) 1(ADD RACH)

Transport channel

1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set.2.[PARA]RECOVERTHD[/PARA] must be larger than [PARA]RPTTHD[/PARA].

DependOnNCell(ADD CELLDRD,SET DRD) None(ADD CELLREDIRECTION,SET REDIRECTION)

RNC(SET REDIRECTION,SET DRD) Cell(ADD CELLREDIRECTION,ADD CELLDRD)

[MML]SET DRD[/MML] command. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. 1. This parameter is valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUENCY or ONLY_TO_INTER_


0


None


AMR:100; Other:0(SET REDIRECTION) AMR:100;Other:0(ADD CELLREDIRECTION)

RNC(SET REDIRECTION) Cell(ADD CELLREDIRECTION)

valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the [MML]SET


valid when [PARA]RedirSwitch[/PARA] is set to ONLY_TO_INTER_FREQUENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the [MML]SET


None



[9237-9387]Special frequencies: noneBandIndNotUsed:[0-16383] If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. The value range of this parameter depends on the setting of the [PARA]ReDirBandInd[/PARA] parameter, as shown below:Band1Common frequencies: [10562-10838]Special frequencies: noneBand2Common frequencies:

None


None

N (No impact on the UE in idle mNone board YNone board None YNone board None YON RNC None N (No impact on the UE in idle mREHOSTRIGHNOW RNC None N (No impact on the UE in idle m3000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m10000 RNC None N (No impact on the UE in idle m15000 RNC None N (No impact on the UE in idle m


[0-16383] If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. This parameter is required only when the [PARA]ReDirUARFCNUplinkInd[/PARA] parameter is set to TRUE. The value range of this parameter depends on the setting of the [PARA]ReDirBandInd[/PARA] parameter, as shown below:Band1:Common frequencies: [9612-9888]Special frequencies:


set through the [MML]SET DRD[/MML] command. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. 1. This parameter is valid when [PARA]RedirBandInd[/PARA] is not set to BandIndNotUsed. CLK[/MML] is set to AOUa/POUa, the value range of

20000 RNC None N (No impact on the UE in idle m3000 RNC None N (No impact on the UE in idle m45000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m10000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m


None

None Not involved



D4000


D4000


IP Route(ADD IPRT) SAALLNK/AAL3PATH/IPOAPVC/VPCLCX using this ATM traffic record index(ADD ATMTRF)



D1000

None N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle mRESERVED_SWITCH_0_BIRNC None N (no impact on the UE in idle mRESERVED_SWITCH_1_BIRNC None N (no impact on the UE in idle m0 RNC None N (no impact on the UE in idle m4294967295 RNC None N (no impact on the UE in idle m0 RNC None N (no impact on the UE in idle m255 RNC None N (no impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m

3

None Not involved1 RAB This parameter is r N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle m


None Cell The value of this pa N (No impact on the UE in idle mNone Cell The value of this pa N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involved



Transport channel

None

None Not involved

None

None Not involvedNone Subsystem None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

20 LGC port N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m200 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m4 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m

RNC(ADD GSMNCELL,ADD INTERFREQNCELL,ADD INTRAFREQNCELL,ADD CELLINTRAFREQHO) Cell(ADD SMLCCELL)

RNC(ADD GPS) (RST RNC)

1.When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set.2.[PARA]RECOVERTHD[/PARA] must be larger than [PARA]RPTTHD[/PARA].

5000 RNC None N (No impact on the UE in idle m350 RNC None N (No impact on the UE in idle m1000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mNone AAL2 Path When the value of YNone AAL2 Path When the value of [ YNone IP Path When the value of [ Y

None

When [PARA]ISFIRST Not involvedNone LGC port None Transmission Resource ManagemeSHARE NodeB None N (No impact on the UE in idle mNone RNC None Not involved


None RNC None Not involvedOFF RNC When the value of [PA Y2 RNC None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

LGC port(ADD IPLOGICPORT) Transmission resource group(ADD RSCGRP)

UNI: 15000NNI: 1500

None

None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

Cell(ADD CELLALGOSWITCH) NodeB(ADD NODEBALGOPARA) RNC(SET CACALGOSWITCH)

0(ADD NODEBALGOPARA,ADD CELLALGOSWITCH) None(SET CACALGOSWITCH)


None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle mNone Port None Y

4294967295 RNC None Y

1 RNC When [PARA]RTCPSwi N (No impact on the UE in idle m180 RNC None N (no impact on the UE in idle m180 RNC None N (no impact on the UE in idle mOFF RNC When [PARA]TnlBear N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involved180 RNC None N (no impact on the UE in idle m180 RNC None N (no impact on the UE in idle mD16000 RNC This parameter i N (no impact on the UE in idle mD64 RNC N (no impact on the UE in idle mD5000 RNC This parameter i N (no impact on the UE in idle m

0(ADD NODEBALGOPARA,ADD CELLALGOSWITCH) None(SET CACALGOSWITCH)


Thd[/PARA] < [PARA]RtEFach2DHTvmThd[/PARA];




D1024 RNC N (no impact on the UE in idle mD0 RNC None N (no impact on the UE in idle m12 SCTP None N (No impact on the UE in idle m25 SCTP None N (No impact on the UE in idle m1000 SCTP The value to be set N (No impact on the UE in idle m3000 SCTP The value to be set N (No impact on the UE in idle m1000 SCTP The value to be set N (No impact on the UE in idle mNone Services carrie None Not involved

The following relationship must be satisfied:[PARA]RtDH2FTvmThd[/PARA] < [PARA]RtEFach2CpcTvmThd[/PARA].

The following relationship must be satisfied:[PARA]RtDH2FTvmThd[/PARA] < [PARA]RtEFach2DHTvmThd[/PARA].

The following relationship must be satisfied:[PARA]RtDH2FTvmThd[/PARA] < [PARA]RtF2CpcTvmThd[/PARA].

The following relationship must be satisfied:[PARA]RtDH2FTvmThd[/PARA] < [PARA]RtF2DHTvmThd[/PARA].

5 LGC port When the value of [ N (No impact on the UE in idle m5 LGC port When the value of [ N (No impact on the UE in idle mNone LGC port None Transmission Resource ManagemeNone IP Path None N (No impact on the UE in idle mNone Transmission r When [PARA]GRPT[/P N (No impact on the UE in idle m

None

Y


876 RNC N (No impact on the UE in idle mNone SAAL When the value of N (No impact on the UE in idle m

SAAL(ADD SAALLNK) AAL2 Path(ADD AAL2PATH) RNC(ADD VPCLCX) IPoA PVC(ADD IPOAPVC)

ATMLGCPORT, this parameter is valid. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. 1.When the value of [PARA]CARRYT[/PARA] in [MML]ADD IPOAPVC[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required.2.When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML]

The value of the parameter must satisfy the function below: [PARA]RxTxtoTrig6F[/PARA] - [PARA]RxTxtoTrig6G[/PARA] >= 256.

The value of the parameter must satisfy the function below: [PARA]RxTxtoTrig6F[/PARA] - [PARA]RxTxtoTrig6G[/PARA] >= 256.

None

Not involvedNone SAAL None Not involvedNone MTP3B None N (No impact on the UE in idle m

None RNC

Not involvedFALSE NodeB None N (No impact on the UE in idle m50 Physical chann None Not involvedNone Cell None N (No impact on the UE in idle m

SAAL(ADD NCP,ADD CCP,ACT VCLCC,ADD SAALLNK) MTP3(ADD MTP3LNK) Adjacent Node(ADD ADJNODE)

[PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH, this parameter is valid. When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the SAAL link number should be set. When [PARA]CARRYLNKT[/PARA] is SAAL or SAAL-SCTP, this parameter is valid.

The value of this parameter is dependent on the value of [PARA]SAC[/PARA] in [MML]ADD SAC[/MML];This service area is not configured as a classified zone.

None SAALLNK/AAL2 Not involvedNone Physical chann None Not involved

None

Not involved

None

Not involvedNone RNC When the value of [ YDISABLE Port None Not involvedNone Port None Not involvedNone NodeB None N (no impact on the UE in idle mALL RNC None Not involvedMBMS service Cell None N (No impact on the UE in idle m

1.When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to RTVBR or NRTVBR and [PARA]UT[/PARA] is selected, this parameter should be set.2.[PARA]SCR[/PARA] must be smaller than [PARA]PCR[/PARA].

E1T1 link(SET E1T1) Corresponding optical port(SET OPT)

E1T1[/MML] is set to AEUa or AOUa, the value of [PARA]SCRAMBLESW[/PARA] can be set. When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to UOIa and the logic

SCTP(ADD NCP,ADD CCP,ADD SCTPLNK) RNC(ADD M3LNK)

The parameter [PARA]SCTPLNKN[/PARA] in [MML]ADD SCTPLNK[/MML] When [PARA]CARRYLNKT[/PARA] is SCTP or SAAL-SCTP, this parameter is valid.

None RNC None Not involvedNone PPP Link None Not involved

None

None Not involved

OFF

If this parameter N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m

None

None Not involvedNone Adjacent Node When the value of [ Not involved

Cell(ADD CELLMBMSFACH,ADD CELLMBMSSCCPCH) RNC(SET MTCH,SET MBMSFACH,SET MBMSSCCPCH)


Cell(ADD CELLMBMSFACH,ADD CELLMBMSSCCPCH) RNC(SET MTCH,SET MBMSFACH,SET MBMSSCCPCH)

10 RNC N (No impact on the UE in idle mDEDICATED NodeB None N (No impact on the UE in idle m0 Cell This parameter is re N (No impact on the UE in idle mHO_TO_GSM_SHOULD_NRAB This parameter is N (No impact on the UE in idle m3 RNC None N (No impact on the UE in idle m60 RNC None N (No impact on the UE in idle m



-24(SET INTRAFREQHO,ADD CELLINTRAFREQHO) -20(SET SMLC)

Cell(ADD CELLINTRAFREQHO) RNC(SET SMLC,SET INTRAFREQHO)


TRUE Cell

None N(For the UE in idle mode, the val

FALSE Cell

None N(For the UE in idle mode, the valNone Cell None N (No impact on the UE in idle mNone RNC This parameter cann N (No impact on the UE in idle m

None

Not involvedNone RNC None Not involvedTRUE Transport chan None Not involvedNone MTP3 None Not involved


RNC(ADD M3LNK,ADD M3LKS,ADD M3RT,ADD MTP3RT,ADD MTP3LKS) MTP3(ADD MTP3LNK)

The parameter [PARA]SIGLKSX[/PARA] in [MML]ADD MTP3LKS[/MML] The [PARA]SIGLKSX[/PARA] field in [MML]ADD M3LKS[/MML] The parameter [PARA]SIGLKSX[/PARA] in [MML]ADD M3LKS[/MML]




N (no impact on the UE in idle mD3.4 RNC None N (No impact on the UE in idle mD3.4 RNC None N (No impact on the UE in idle mNone Ethernet port None Not involved15 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m15 RNC None N (No impact on the UE in idle m0 Cell This parameter is re N (No impact on the UE in idle mNone Physical chann None Not involved0 Physical chann None N (No impact on the UE in idle m1 Physical chann None N (No impact on the UE in idle m2 Physical chann None N (No impact on the UE in idle m3 Physical chann None N (No impact on the UE in idle mNone Physical chann None N (No impact on the UE in idle mB0000 RNC None YWEEK RNC When the value of [P YAll RNC None N (no impact on the UE in idle mNone SRB None Not involvedMay RNC When the value of [P YNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC Not involvedNone RNC None Not involved





0, 2, 4, 8 to 27.When the value of

None RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC Only valid to the slo Not involvedNone Ethernet port None Not involvedNone Ethernet port For FG2a board, if the Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involved

None

None Not involvedNone RNC None YNone Ethernet port None Not involvedNone RNC None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone RNC None Not involvedNone RNC Only valid to the slo Not involvedNone Ethernet port Only valid to the slo Not involvedNone NodeB None Not involvedNone LGC port None Not involvedNone IMA group None Not involvedNone RNC none Not involved


None

Not involvedNone Board None Not involvedNone MTP3 None Not involved

ST,SET MSPCMD,SWP BRD,ADD M3LNK) SCTP(ADD SCTPLNK) (ADD PPPLNK,RST PPPLNK,RST MPLNK,STR IMATST,CLR BRD) VCL(LOP VCL) E1/T1 link(SET E1T1LOP) Cell(LOP E1T1) Ethernet port(ADD ETHIP,SET ETHPORT,ACT ETHPORT,ADD IPRT,PING IP) Subrack(ADD ETHREDPORT,ACT MSP,ADD

[PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to GCUa/GCGa, the value range of [PARA]SN[/PARA] is 12 to 13. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to DPUb, the value range of [PARA]SN[/PARA] is 8 to 19. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to SPUa, the value range of [PARA]SN[/PARA] is 0 to 5 and 8 to 11. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to PEUa,AEUa,FG2a,GOUa,AOUa,POUa,UOIa, the value range of [PARA]SN[/PARA] is 14 to 27.

None

None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m


None RNC SNAC needs to be s Not involved

None RNC None Not involvedOFF RNC None N (No impact on the UE in idle m

None RNC When the value of [P YNone RNC This parameter depend YNone RNC When the value of [PA YOFF Cell This parameter is N (No impact on the UE in idle m

WNF RNC None Y

Subsystem(ADD CBSADDR) Sub System(SET NCELLDETECTSWITCH) RNC(ADD IURCOMMSCCP) (ADD NODEB)

100M Ethernet port When the value of [ N (No impact on the UE in idle m255 Cell None N(impact on Cell Selection and Re

None

None. N (No impact on the UE in idle m

None RNC This parameter, [PA N (No impact on the UE in idle m




RNC(ADD SPG) Cell(ADD QUICKCELLSETUP,ADD CELLSETUP)

The value of this parameter must satisfy the following relationship:[PARA]SpucHeavy[/PARA] >= [PARA]SpucLight[/PARA];100 >= [PARA]SpucHeavy[/PARA] + [PARA]SpucHyst[/PARA].

The value of this parameter must satisfy the following relationship:[PARA]SpucLight[/PARA] >= [PARA]SpucHyst[/PARA];100 >= [PARA]SpucHeavy[/PARA] + [PARA]SpucHyst[/PARA].

45 Cell N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle mDCH RNC None. N (No impact on the UE in idle mFALSE RNC None. N (No impact on the UE in idle m15 RNC None N (No impact on the UE in idle m32 Cell This parameter must N (No impact on the UE in idle m512 Cell This parameter must N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m15 RNC None N (No impact on the UE in idle mNone E1/T1 None N (No impact on the UE in idle m

None

None Not involvedNone RNC When the value of [ N (No impact on the UE in idle m

None RNC Not involved

The value of this parameter must satisfy the following relationship:[PARA]SpucHeavy[/PARA] >= [PARA]SpucLight[/PARA];[PARA]SpucLight[/PARA] >= [PARA]SpucHyst[/PARA].

Hybird IP, the parameter is EF.When the interface type is stack, the parameter is EF; transimssion type is Hybird

RNC(ADD CLKSRC) ethprot(RMV CLKSRC)

The parameter must not be the same as any IP address that has been configured in the RNC. The parameter must not be the same as the internal IP address of the BAM.

None

None Not involvedNone RNC When 2MBPS exists on Not involvedNone E1/T1 None N (No impact on the UE in idle m60 SAAL When the value of [P N (No impact on the UE in idle mNone RNC When the value of [ N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involved

None RNC None Not involvedNone RNC None Not involved


None

Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone Ethernet port None Not involvedNone Ethernet port None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone RNC None Not involvedNone Ethernet port None Not involvedNone NodeB None Not involvedNone LGC port None Not involvedNone IMA group None Not involvedNone LGC port None Transmission Resource ManagemeNone RNC none Not involved0 SRB None Not involvedNone SRB None Not involvedNone MBSC None Not involved

OPTST,ADD RNCCBCPUID,ADD VLANID,ADD MPLNK,SET ETHPORT,SET OPT,ACT VCLCC,ADD DEVIP,INH BRD,ADD IMAGRP,ADD FRALNK,SET MSP,SET E1T1,SET QUEUEMAP,ADD BRD,ADD SUBRACK,SWP ETHPORT,TRC IPADDR,ULD RSTINFO,SET OPTLOP,STR E1T1TST,SET E1T1LOP,STR CPUUSAGETST,ULD

valid.When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to SAALLNK, the value of [PARA]SRN[/PARA] should be set.When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RBS, the value of [PARA]SRN[/PARA] should be set.When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the subrack number should be set. When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, and the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of

None Board None Not involvedNone MTP3 None Not involved

None

None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle mNone RNC None Not involved



None RNC None N (No impact on the UE in idle mYES RNC Valid when [PARA]BE N (no impact on the UE in idle mNRT RNC None N (No impact on the UE in idle m400 RNC None N (No impact on the UE in idle m60 RNC None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m30 RNC None N (No impact on the UE in idle m

Subsystem(ADD CBSADDR) Sub System(SET NCELLDETECTSWITCH) RNC(ADD IURCOMMSCCP)

SRNSR_DSCR_IUR_RESRRNC None N (no impact on the UE in idle m60 RNC None N (No impact on the UE in idle mNone UE SRNTI needs to be s Not involvedNone board None Y-50 Physical chann None N (Impact on network searching o60 board [PARA]SSCPUAVEUS Not involved70 board [PARA]SSCPUMAXUS Not involved

None RAB None. N (No impact on the UE in idle m

75 DSP Not involved

80 DSP Not involved0 Cell This parameter is re N (No impact on the UE in idle m127 Cell None N(impact on Cell Selection and ReNone RNC None Not involvedNone RNC None Not involved

1.When the value of [PARA]BT[/PARA] in [MML]SET CPUTHD[/MML] is set to DPUb, the value of [PARA]SSDSPAVEUSAGEALMTHD[/PARA] should be set.2.[PARA]SSDSPAVEUSAGEALMTHD[/PARA] must be smaller than [PARA]SSDSPMAXUSAGEALMTHD[/PARA].

1.When the value of [PARA]BT[/PARA] in [MML]SET CPUTHD[/MML] is set to DPUb, the value of [PARA]SSDSPAVEUSAGEALMTHD[/PARA] should be set.2.[PARA]SSDSPMAXUSAGEALMTHD[/PARA] must be bigger than [PARA]SSDSPAVEUSAGEALMTHD[/PARA].

None RNC None Not involvedNone NodeB None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m


03&00&00 RNC When the value of [P YIt is recommended that the SAALLNK/AAL2 Not involved500 RNC Restriction: [PARA N (no impact on the UE in idle mACTIVE Cell None N (no impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle mNone Cell This paramter is val N (No impact on the UE in idle m20000 RNC None N (No impact on the UE in idle m20 SCCP None N (No impact on the UE in idle m67 SAAL None N (No impact on the UE in idle mOFF RNC When the value of [ YNone RNC None Not involvedD16 RNC None N (No impact on the UE in idle m32 Cell This parameter mus N (No impact on the UE in idle mD384 RNC None N (No impact on the UE in idle m512 Cell This parameter mus N (No impact on the UE in idle mD16 RNC None N (No impact on the UE in idle m

FALSE


STTD_not_Supported


the rate unit should be set; when the value of [PARA]UT[/PARA]

Physical channel


None

None. N (No impact on the UE in idle m127 IP Path When the value of [ N (no impact on the UE in connecNone RNC None Not involvedFALSE Cell None Not involvedFALSE NodeB None. N (No impact on the UE in idle mFALSE RNC None N (No impact on the UE in idle m

FALSE NodeB None. N (No impact on the UE in idle mNO RNC None N (No impact on the UE in idle mNone RNC When [PARA]CNProtc N (No impact on the UE in idle mFALSE Cell None N (No impact on the UE in idle mFALSE NodeB None. N (No impact on the UE in idle mFALSE Cell None N (No impact on the UE in idle mNone SRB None Not involvedSUN RNC When the value of [ Y


OFF RNC When [PARA]CNDomai N (No impact on the UE in idle m

RAB(ADD TYPRABOLPC) (ADD TYPRABRLC)

YES SCTP None N (No impact on the UE in idle m10 SCTP None N (No impact on the UE in idle mOFF RNC None Not involved0 RNC None Not involvedOFF RNC None Not involvedOFF RNC None Not involvedOFF RNC None Not involvedOFF RNC None Not involvedOFF RNC None Not involved0 RNC None Not involved0 RNC None Not involved0 RNC None Not involvedFIRST RNC When the value of [ Y60 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m60 RNC None N (No impact on the UE in idle m10 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle m180 RNC None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mD2000 RNC None N (No impact on the UE in idle mD2000 RNC None N (No impact on the UE in idle mD2000 RNC None N (No impact on the UE in idle mD30 RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mD40 RNC None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m


3 RNC None N (No impact on the UE in idle mD0 RNC T314 should be set gr N (No impact on the UE in idle mD0 RNC T315 should be set gr N (No impact on the UE in idle mD30 RNC None N (No impact on the UE in idle m10 RNC T3212 needs to be N (Changing the time for the UE in

D600 RNC None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle m10 RNC None N (no impact on the UE in idle m

-12



-92



-12



-92



-12



-92



16



16

None N (No impact on the UE in idle mNone RNC None Not involvedNone RNC None N (No impact on the UE in idle m

None Not involved


Configured to 1 when TFsNumber is 1;Configured to 0 when TFsNumber is 2 or 3(ADD FACHDYNTFS) None(ADD PCHDYNTFS) 1(ADD RACHDYNTFS)

Transport channel

This paramter is val Not involved2 Transport chan This paramter is val Not involved



1(ADD PCHDYNTFS,ADD FACHDYNTFS) 2(ADD RACHDYNTFS)

Transport channel

1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D1, D2, D3, or D4.2.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA]

1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D2, D3, or D4.2.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA]


None RNC N (No impact on the UE in idle m170 MTP3 None N (No impact on the UE in idle m

None Cell None Y

None Cell This paramter is val N (No impact on the UE in idle m10 MTP3 None N (No impact on the UE in idle mD60 Cell This parameter is re N (No impact on the UE in idle mD20 Cell This parameter is re N (No impact on the UE in idle mNotUsed Cell This parameter is v N(impact on Cell Selection and ReNotUsed Cell This parameter is v N(impact on Cell Selection and Re

60


1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D3 or D4.2.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA]

1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D4.2.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA]


None SRB None Not involvedNone SRB None Not involvedNone SRB None Not involved

D3 Cell

This parameter is val N(For the UE in idle mode, the larg

D2 Cell

This parameter is val N(For the UE in idle mode, the larg

480

Valid when [PARA]C N (no impact on the UE in idle m

480




480


RNC


RNC This paramter is va N (No impact on the UE in idle m

RNC

This paramter is va N (No impact on the UE in idle m

100 RNC This paramter is va N (No impact on the UE in idle m

100 RNC This paramter is va N (No impact on the UE in idle m


20(SET LDM) 100(SET SATLDM)

1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]);[PARA]TenMsecForDlBasicMeas[/PARA] < [PARA]LdrPeriodTimerLen[/PARA] x 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]);[PARA]TenMsecForDlBasicMeas[/PARA] < [PARA]OlcPeriodTimerLen[/PARA]/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]). This paramter is valid only when [PARA]ChoiceRprtUnitForDlBasicMeas[/PARA] is set to TEN_MSEC,and it must satisfy the


100(SET LDM) 10(ground circuit)/100(satellite transmission)(SET SATLDM)

RNC


RNC This paramter is va N (No impact on the UE in idle m

480


180

N (No impact on the UE in idle mEXISTS Physical chann This parameter is val Not involved


None RNC None Not involved280 RNC Restriction: [PARA N (no impact on the UE in idle mNone RNC Restriction: [PARA N (no impact on the UE in idle m


merLen[/PARA] * 1000/2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]);[PARA]TenMsecForUlBasicMeas[/PARA] < [PARA]OlcPeriodTimerLen[/PARA] /2 (See [MML]SET LDCPERIOD[/MML] and [MML]SET SATLDCPERIOD[/MML]) . This paramter is valid only when [PARA]ChoiceRprtUnitForUlBasicMeas[/PARA] is set to TEN_MSEC,and it must satisfy the 20(SET LDM)

100(SET SATLDM)




Transport channel

None RNC Restriction: [PARA N (no impact on the UE in idle mNone RNC This parameter, [PAR N (No impact on the UE in idle mMedium RNC None N (No impact on the UE in idle mLow RNC None N (No impact on the UE in idle mLow RNC None N (No impact on the UE in idle mLow RNC None N (No impact on the UE in idle mLow RNC None N (No impact on the UE in idle mLow RNC None N (No impact on the UE in idle mHigh RNC None N (No impact on the UE in idle mHigh RNC None N (No impact on the UE in idle mHigh RNC None N (No impact on the UE in idle mHigh RNC None N (No impact on the UE in idle mHigh RNC None N (No impact on the UE in idle mMedium RNC None N (No impact on the UE in idle mMedium RNC None N (No impact on the UE in idle mMedium RNC None N (No impact on the UE in idle mMedium RNC None N (No impact on the UE in idle mNone RNC This parameter is re N (No impact on the UE in idle m2000 Ethernet port None Not involved


None Cell This paramter is val Not involved10 AAL2 Path None Y4 Ethernet port None Not involved0 Cell None N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m5000 RAB This parameter is r N (No impact on the UE in idle m

D0



D320



D1280

None N (No impact on the UE in idle m0 Cell This parameter is v N (No impact on the UE in idle m0 RNC This parameter is v N (No impact on the UE in idle m0 Cell This parameter is v N (No impact on the UE in idle m


0



0 Cell This parameter is v N (No impact on the UE in idle mD240 RAB None. N (No impact on the UE in idle mD2560 RAB None. N (No impact on the UE in idle m

2 RAB This parameter is r N (No impact on the UE in idle m14 RAB This parameter is r N (No impact on the UE in idle mNone RNC None Not involvedNone Adjacent Node The TRMMAP index i N (No impact on the UE in idle mNone Adjacent Node The TRMMAP index i N (No impact on the UE in idle mNone Adjacent Node The TRMMAP index i N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone MTP3B None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mATM_TRANS NodeB Y60 RNC When the value of [P Y



configured with adjacent nodes

None(ADD FACH) 10(SET MBMSFACH,ADD CELLMBMSFACH,ADD PCH)

Transport channel

None(ADD FACH) 35(SET MBMSFACH,ADD CELLMBMSFACH,ADD PCH)

Transport channel

1 Cell This paramter is val N (No impact on the UE in idle m


D0 Cell

None N(For the UE in idle mode, the largNone RAB None. N (No impact on the UE in idle m

None RNC

N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone Cell None N (No impact on the UE in idle m

M3UA_LOADSHARE_MORNC None Not involved1 Cell None N (No impact on the UE in idle m10 NodeB None N (No impact on the UE in idle mNone IP Path None Not involved

None

Not involved

This parameter, [PARA]UserPriority[/PARA], [PARA]THP[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table. None.

RNC(ADD ADJMAP,ADD TRMMAP) Adjacent Node(ADD ADJNODE)

TRMMAP[/MML] is set to IUB, IUR or IUCS, this parameter is valid. When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB_IUR_IUCS, this parameter is valid. When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is

None Not involvedNone RAB None. N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle mNone RAB None. N (No impact on the UE in idle m

10


None(ADD FACHDYNTFS,ADD FACHLOCH,ADD FACH) 1(ADD RACHDYNTFS,ADD RACH) 3(ADD PCH,ADD PCHDYNTFS) 0(ADD BCH)

Transport channel


1 Cell None N(impact on Cell Selection and Re255 Cell None N(impact on Cell Selection and Re255 Cell None N(impact on Cell Selection and Re

None

None Not involved

SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index(ADD ATMTRF) Ethernet port(RMV ATMTRF)


D320(SET INTRAFREQHO,ADD CELLINTRAFREQHO) D160(SET SMLC)



D640(SET INTRAFREQHO,ADD CELLINTRAFREQHO) D1280(SET SMLC)


D640



D320



D1280



D0



D640



D640 RNC None N (No impact on the UE in idle mD240 RNC None N (No impact on the UE in idle mD240 RNC None N (No impact on the UE in idle m

None

None Not involved

Ethernet port(ADD ETHTRKLNK) RNC(RMV ETHTRKLNK)

None

None Not involved

None

None Not involved50 Cell None N (No impact on the UE in idle mNone RNC This paramter is val N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone LGC port None Not involvedNone Cell When the value of [ YOFF E1T1 link When the value of Not involved

None

Not involvedNone E1/T1 None N (No impact on the UE in idle mNone RNC None Not involved

Ethernet port(ADD ETHTRKLNK) RNC(RMV ETHTRKLNK)

Ethernet port(ADD ETHTRKLNK,ADD ETHTRKIP,ADD ETHTRK) RNC(RMV ETHTRKIP,RMV ETHTRK)

PPP Link(ADD PPPLNK) E1/T1 port(ADD FRALNK) RNC(ADD MPLNK)

[PARA]BRDTYPE[/PARA] in [MML]ADD PPPLNK[/MML]is set to PEUa, the value of[PARA]TSBITMAP[/PARA] must be set.3.When the value of [PARA]BRDTYPE[/PARA] in [MML]ADD MPLNK[/MML]is set to PEUa, the value

240

N (No impact on the UE in idle mNone UE This parameter is va N (No impact on the UE in idle m30 Ethernet port None Not involvedOFF RNC None N (No impact on the UE in idle mNone RNC When the value of [ Y64 Ethernet port None Not involvedNone LGC port None Transmission Resource ManagemeNone IP Path None N (No impact on the UE in idle mNone Transmission r When [PARA]GRPT[/P N (No impact on the UE in idle m

None Cell None Y

500 Ethernet port None Not involved30 Ethernet port None Not involved



None

N (No impact on the UE in idle mNone control interfac None Y

None Cell

None Y

IPoA PVC(ADD IPOAPVC) AAL2 Path(ADD AAL2PATH) SAAL(ADD SAALLNK) RNC(ADD VPCLCX)

FRAATM, NCOPT, or ATMLGCPORT, this parameter is required.2.When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATMLGCPORT, this parameter is required. When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. When the value of [PARA]CARRYT[/P

None Cell

When [PARA]UARFCNUpli Y

None Cell None Y

5000 RNC None N (No impact on the UE in idle m150 IP Path When the value of N (No impact on the UE in idle mMUXCLOSE IP Path When the value of [ N (No impact on the UE in idle mMUXCLOSE IP Path When the value of [ N (No impact on the UE in idle m2 IP Path When the value of N (No impact on the UE in idle mNone RNC None N (no impact on the UE in idle mNone RNC None N (no impact on the UE in idle m5000 RNC None N (No impact on the UE in idle m5000 RNC None N (No impact on the UE in idle mNone RNC None Not involved1000 E1T1 Link When the value of [ Not involvedNone SRB None Not involved50 RNC This paramter is va N (No impact on the UE in idle m

D320


D320


D320


D320


D240

None N (no impact on the UE in idle m10 RNC This paramter is va N (No impact on the UE in idle m

RNC None N (No impact on the UE in idle m

D8

If this parameter N (No impact on the UE in idle mD64 RNC This parameter can N (No impact on the UE in idle m






D6(SET LDM) D3(SET SATLDM)

RNC(SET FRCCHLTYPEPARA) Cell(ADD CELLFRC)


D640


D1280


D2560


D1280


D240









83 Cell N (No impact on the UE in idle mSF/2 NodeB None. N (No impact on the UE in idle m

3


3


The value of this parameter must satisfy the following relationship:[PARA]UlOlcTrigThd[/PARA](See [MML]ADD CELLLDM[/MML]) >= [PARA]UlCellTotalThd[/PARA];[PARA]UlCellTotalThd[/PARA] > [PARA]UlNonCtrlThdForHo[/PARA] .



D64 RNC N (no impact on the UE in idle mSILENT RAB None. N (No impact on the UE in idle m

D64

This parameter is a N (no impact on the UE in idle mD64 RNC N (No impact on the UE in idle m

SF16 Cell N (No impact on the UE in idle m0 Cell None N (No impact on the UE in idle mSCHEDULED RNC None N (No impact on the UE in idle m10 RNC This paramter is va N (No impact on the UE in idle m200000 Cell None N (No impact on the UE in idle m20 Cell None N (No impact on the UE in idle m1 Cell None N (No impact on the UE in idle m


When the value of UlMidRateCalc is HAND_APPOINT,the following relationship must be satisfied:[PARA]UlDcccRateThd[/PARA] <= [PARA]UlMidRateThd[/PARA].


users ([PARA]UserPriority[/PARA] is set to

The value of this parameter must satisfy the following relationship:[PARA]UlHoCeResvSf[/PARA] >= [PARA]UlLdrCreditSfResThd[/PARA] .

1


SF8

The value of this pa N (No impact on the UE in idle mno action Cell None N (No impact on the UE in idle m

no action






no action


1


inter-freq load handover(ADD CELLLDR) BE traff rate reduction(ADD NODEBLDR)






no action


no action

None N (No impact on the UE in idle m55 Cell N (No impact on the UE in idle mD64 NodeB None. N (No impact on the UE in idle m

The value of this parameter must satisfy the following relationship: [PARA]UlLdrTrigThd[/PARA] >= [PARA]UlLdrRelThd[/PARA];[PARA]UlOlcRelThd[/PARA] >= [PARA]UlLdrRelThd[/PARA].





[PARA]UlOlcTrigThd[/PARA] > [PARA]UlLdrTrigTh

D19

None N (no impact on the UE in idle mHAND_APPOINT RNC The parameter is va N (no impact on the UE in idle m


1000 RNC

N (no impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle m


The parameter is valid when [PARA]UlMidRateCalc[/PARA] in [MML]SET DCCC[/MML] is set to HAND_APPOINT, and the following relationship must be satisfied:[PARA]UlDcccRateThd[/PARA] <= [PARA]UlMidRateThd[/PARA].

The following relationship must be satisfied: [PARA]UlModeChangeTimerLen[/PARA] <= [PARA]DlModeChangeTimerLen[/PARA].



The value of this parameter must satisfy the following relationship:[PARA]UlNonCtrlThdForHo[/PARA] > [PARA]UlNonCtrlThdForAMR[/PARA];[PARA]UlNonCtrlThdForAMR[/PARA] > [PARA]UlNonCtrlThdForOther[/PARA].

The value of this parameter must satisfy the following relationship:[PARA]UlCellTotalThd[/PARA] > [PARA]UlNonCtrlThdForHo[/PARA] ;[PARA]UlNonCtrlThdForHo[/PARA] > [PARA]UlNonCtrlThdForAMR[/PARA];[PARA]UlNonCtrlThdForHo[/PARA] > [PARA]UlNonCtrlThdForNonAMR[/PARA] .

75 Cell N (No impact on the UE in idle m60 Cell N (No impact on the UE in idle m


The value of this parameter must satisfy the following relationship:[PARA]UlNonCtrlThdForHo[/PARA] > [PARA]UlNonCtrlThdForNonAMR[/PARA];[PARA]UlNonCtrlThdForNonAMR[/PARA] > [PARA]UlNonCtrlThdForOther[/PARA].

[PARA]UlNonCtrlThdForNonAMR[/





The value of this parameter must satisfy the following relationship: [PARA]UlOlcTrigThd[/PARA] >= [PARA]UlOlcRelThd[/PARA];[PARA]UlOlcRelThd[/PARA] >= [PARA]UlLdrRelThd[/PARA].


1


1

None N (No impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle m

20

None N (No impact on the UE in idle mNO RNC Valid when [PARA]VP N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle mNO RNC Valid when [PARA]A N (no impact on the UE in idle m3_Rates RNC None N (no impact on the UE in idle m3_Rates RNC None N (no impact on the UE in idle m

D64

None N (No impact on the UE in idle m10 RNC This paramter is val N (No impact on the UE in idle mSCHEDULED RNC None N (No impact on the UE in idle m100 RNC This paramter is va N (No impact on the UE in idle mD256 RNC None. N (No impact on the UE in idle mNON-SCHEDULED RNC None N (No impact on the UE in idle mNone RNC Restriction: [PARA N (no impact on the UE in idle m

[PARA]UlOlcTrigThd[/PARA] >=





None RNC N (no impact on the UE in idle m

None RNC N (no impact on the UE in idle mNone RNC Restriction: [PARA N (no impact on the UE in idle m80 Cell None N (No impact on the UE in idle m1 RNC This parameter can o N (No impact on the UE in idle m

D640


D640


D240


Restrictions: 1) [PARA]UlThd6A2[/PARA] <= [PARA]UlThd6B2[/PARA]; 2) [PARA]UlThd6A2[/PARA] > [PARA]UlThd6B1[/PARA]

Restrictions: 1) [PARA]UlThd6A1[/PARA] <= [PARA]UlThd6B1[/PARA]; 2) [PARA]UlThd6A2[/PARA] > [PARA]UlThd6B1[/PARA]






None Cell N (no impact on the UE in idle m

Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER;[PARA]UncertSemiMajor[/PARA]>=[PARA]UncertSemiMinor[/PARA].

None

None N (No impact on the UE in idle m2 RNC The value of this p N (No impact on the UE in idle mNone Adjacent Node When the value of [ Not involvedNone Transmission r When [PARA]ISFIRST Not involvedNone LGC port None Transmission Resource ManagemeNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involvedNone Cell None Not involved

None

None N (No impact on the UE in idle mNone Cell None Not involved

-12


UNILNK(ADD UNILNK) RNC(RMV UNILNK)

Cell(ADD CELLURA,ADD URA) RNC(ADD NRNCURA)





-92(SET INTERFREQHOCOV,ADD CELLINTERFREQHOCOV) -97(SET INTERRATHOCOV,ADD CELLINTERRATHOCOV)




OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is



OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is

CPICH_RSCP






This parameter is N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mDisable RNC None N (No impact on the UE in idle m

NOT_USED

None N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mALL_USER Cell None N (No impact on the UE in idle m5 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m




None RNC

N (No impact on the UE in idle mNone RNC None N (No impact on the UE in idle mNone SAALLNK/AAL2 None Not involvedNone AAL2 Path When the value of [ YCC PVC When the value of [ Not involved

DISABLE

This parameter dete Y

This parameter, [PARA]TrafficClass[/PARA], [PARA]THP[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table. This parameter is not required when the [PARA]TrafficClass[/PARA] parameter is set to IMS or SRB. None.

SCTP(ADD SCTPLNK) IP Path(ADD IPPATH)

None

Not involvedNone RNC None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle m


RNC When the value of [ N (No impact on the UE in idle m0 RNC None N (No impact on the UE in idle m70 RNC None N (No impact on the UE in idle mDCH RNC None. N (No impact on the UE in idle mEDCH_TTI_10ms RNC None N (No impact on the UE in idle mNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involvedNone SRB None Not involved


None AAL2 Path When the value of [ YFALSE RNC None N (No impact on the UE in idle m

FALSE Cell None N (No impact on the UE in idle m

NO RNC None N (no impact on the UE in idle m5 RNC None N (No impact on the UE in idle m100 RNC None N (No impact on the UE in idle m90 RNC None N (No impact on the UE in idle m

RNC(ADD VLANID) IP Path(ADD IPPATH) SCTP(ADD SCTPLNK) Ethernet port(ADD ETHMA)

When the value of [PARA]VLANFlAG[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLE, this parameter is valid. When the value of [PARA]VLANFlAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set to ENABLE, this parameter is valid.

Iur, transmission type is ATM, the parameter is RT_VBR; transimssion LQEF.When the interface type is

200 RNC None N (No impact on the UE in idle m3000 RNC Valid when [PARA]A N (no impact on the UE in idle mNone SRB None Not involved

0



0



M3UA_ASP RNC None Not involvedActive RNC None Not involvedE1_UNBA E1T1 link When the value of [ Not involved600 Port When the value of [ Not involved3 RNC This parameter define N (No impact on the UE in idle m180 RNC None N (no impact on the UE in idle mNone RNC None Y


UNI: 100NNI: 256

Interruption ScopeInterruption Duration(Min) Caution Access Attribute AAL2 Path Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The deleting operatio Read & Write Equipment Subsystem Less than 10 minutes CPU usage to be increRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The deleting operatio Read & Write Equipment

Not involved Not involved Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

while one NodeB can be configured with five AGPS reference receivers at most. 3.If the AGPS reference receiver is configured in the RNC, the AGPS reference receiver must be integrated on the clock card. 4. If the AGPS reference receiver is added to a NodeB, the ID of the home cell of the AGPS reference receiver must be specified, and this cell must have been configured.5. If the AGPS reference recevier is added to an NRNC, the ID of the home RNC of the AGPS reference receiver must be specified and this NRNC must have been configured.6. If the AGPS reference recevier is added to a NodeB of an NRNC, the IDs of the home RNC and

Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Services carr Not involved This parameter cannotRead & Write Transport Not involved Not involved This adjacent node muRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Service not interrupted This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio The service on Interrupt the service un In order to modify Read & Write Transport Not involved Not involved In order to modify Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved If the transport type Read & Write Equipment Not involved Not involved If the transport type Read & Write Equipment Not involved Not involved The modification o Read & Write Radio

PPP link Interrupt the service un The negotiation will bRead & Write Transport



Not involved Not involved The negotiation will bRead & Write Transport Port If the mode is not consis The modification may aRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment RNC Less than 5 minutes Each 8 kHz clock of t Read & Write Equipment RNC Less than 5 minutes Each 8 kHz clock of t Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved In order to modify Read & Write Transport Not involved Not involved In order to modify Read & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment

Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio





Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio





Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Cell Less than 5 minutes None . Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Service not interrupted This parameter cannotRead & Write Equipment RNC Less than 5 minutes This parameter cannotRead & Write Equipment Not involved Not involved If a link is used, you Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport When the val Not involved The auto adjust bandwRead & Write Transport

Not involved Not involved The following conditi Read & Write Transport

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport

Not involved Not involved The following conditi Read & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport

Handover reserved bandwidth = Congestion threshold Handover reserved bandwidth = Congestion threshold Handover reserved bandwidth = Congestion threshold


Not involved Not involved The following conditi Read & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio AAL2 Path Less than 5 minutes The parameter modificRead & Write Equipment IP Path Less than 5 minutes The parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

AAL2 Path Less than 5 minutes The parameter modificRead & Write Equipment Not involved Not involved This parameter is the Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

AAL2 Path Less than 5 minutes The parameter modificRead & Write Transport


Services carri The services are inter The configuration dataRead & Write Transport

Services carri The services are inter The configuration dataRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved 1. Cell ID is in on Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved After running the [ Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Cell The services are interru The cell should be de Read & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved When the network is inRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Services that The services are interr The checksum calculaRead & Write Transport Services that The services are interr The checksum calculaRead & Write Transport Services that The services are interr The checksum calculaRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport





Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport RNC Less than 10 minutes If the clock board ty Read & Write Equipment Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved The CN indexes of th Read & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved When the Iu-Flex funcRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter is use Read & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter is bas Read & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The settings of Cs Read & Write Equipment Not involved Not involved The settings of CsI Read & Write Equipment

Not involved Not involved Read & Write Equipment Not involved Not involved The settings of CS Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio

equipment.When [PARA]CNProtclVer

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved If the time delay is v Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved When running this comRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter cannot Read & Write Equipment







Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment RNC Less than 10 minutes After this parameter i Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Less than 10 minutes After this parameter i Read & Write Transport


Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Equipment




Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Port If the mode is not consis This parameter must Read & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This address must be Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio RNC Interrupt the service un Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

day. Therefore, you must abide this specification to


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The modification of t Read & Write Transport RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Interrupt the service un The parameter cannot Read & Write Equipment RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Transport

PPP link Interrupt the service un Modify this parameter Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio


Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The IP address of th Read & Write Transport

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport This parameter This parameter cannot In [MML]EXP ELABEL[/MMRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved When this parameter Read & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This FACTORTABLE muRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The following conditi Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport

Not involved Not involved The following conditi Read & Write Transport


Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport

Not involved Not involved The following conditi Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved Read & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport



Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport

Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport

Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved For details of the ti Read & Write Transport Not involved Not involved For details of the ti Read & Write Transport Not involved Not involved When the network is inRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio




Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter value Read & Write Equipment

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved [IMA ID] is used to i Read & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The protocol version Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment RNC Inhibition period of th Only the OM channel cRead & Write Equipment Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved If the Inter RAT Inte Read & Write Radio Not involved Not involved If the Intra RAT Inte Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Port The time between deacti This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter value Read & Write Equipment Services carr Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter must bRead & Write Transport Not involved Not involved When this parameter Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved If the transport type Read & Write Transport Not involved Not involved If the transport type Read & Write Transport Not involved Not involved The IP address of the Read & Write Equipment Not involved Not involved The IP address of the Read & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport Port If the mode is not consis The settings of the lo Read & Write Transport

Not involved Not involved Read & Write Transport

1. This command is used for the AOUa and the POUa.2. This command is used only when Huawei equipment is interconnected with the equipment of other vendors.



Not involved Not involved Read & Write Transport Not involved Not involved The value of this para Read & Write Transport

Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved In order to modify Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio




Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This load EQ table muRead & Write Transport Not involved Not involved This load EQ table muRead & Write Transport Not involved Not involved This load EQ table muRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Service not interrupted This parameter cannotRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved The line code should Read & Write Transport



Not involved Not involved The link selection masRead & Write Transport Not involved Not involved The frame structure s Read & Write Transport


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The local IP address Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Cell The services are interru The cell should be de Read & Write Radio Services that The services are interr The addresses of both Read & Write Transport Services that The services are interr The addresses of both Read & Write Transport Services that The services are interr The SCTP port number Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Services that The services are interr This parameter is bas Read & Write Transport Services that The services are interr This parameter is bas Read & Write Transport Services that The services are interr This parameter is bas Read & Write Transport Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter cannot Read & Write Equipment

Services carri The loopback keeps inte Read & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment


services on this link may be interrupted until the link loopback is cancelled.If the uplink is beared by IMAGRP, the IMAGRP must be reset after the loopmode is

Not involved Not involved This parameter cannotRead & Write Transport IP Path Less than 5 minutes The logic port must exRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved If a link is used, you Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport The SCTP link The services are interr The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport



Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio




Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved For parameter modificRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio PPP link Interrupt the service un This parameter cannotRead & Write Transport Not involved Not involved The value of this pa Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved For parameter modificRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio PPP link Interrupt the service un This parameter cannotRead & Write Transport

Not involved Not involved If the length of the Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved GPS record should be Read & Write Equipment


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter is u Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment



Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport




Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio










Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved In order to modify Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Cell The services are interru The cell should be de Read & Write Radio

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved If the RAN Sharing Read & Write Radio Port If the mode is not consis The value of this para Read & Write Transport Not involved Not involved None Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

Services carri The services are interr Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment

If the SCTP link is set to SERVER and the application type is NBAP, the working mode cannot be changed to CLIENT.For the SCTP link whose application type is M3UA, the working mode can be modified only when the upper-layer application is deleted.

Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The IP address of th Read & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter supporRead & Write Equipment Not involved Not involved 1. Set this parameter Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

1. When the parameter is set to OFF, the MR function is disabled.2. The modification of this parameter has no impact on the equipment.




Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Port If the mode is not consis The modification may Read & Write Transport


Not involved Not involved In order to modify Read & Write Transport Not involved Not involved For parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio




Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio The SCTP link The services are interr The parameter modificRead & Write Transport Not involved Not involved If the transport type Read & Write Transport Not involved Not involved If the transport type Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The IP address of the Read & Write Transport Not involved Not involved The IP address of the Read & Write Transport Not involved Not involved When this parameter Read & Write Equipment Not involved Not involved When this parameter Read & Write Equipment


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Less than 10 minutes After this parameter i Read & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification o Read & Write Radio Not involved Not involved When the value of Read & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved Before modifying the Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved This parameter cannotRead & Write Radio RNC The services are interru After modification, t Read & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When the value of Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The negotiation will bRead & Write Transport

Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The settings of the lo Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Service not interrupted This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter is modRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Services carr Not involved This parameter cannotRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Service not interrupted This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio





Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The local IP address Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Services that The services are interr The addresses of both Read & Write Transport Services that The services are interr The addresses of both Read & Write Transport Services carr Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Services that The services are interr The SCTP port number Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When the network is inRead & Write Transport









PPP link Interrupt the service un Modify this parameter Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Port The time between deacti This parameter cannotRead & Write Transport Port The time between deacti This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This IP path must be Read & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Port The time between deacti This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment


Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The IP address of th Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter can beRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved Modifying this parametRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved Read & Write Radio

choices. SELECT ALL means turning on all the switches; CLEAR ALL means turning off all the switches; GRAYED ALL means keeping the original states of all the switches. If the SYS_INFO_UPDATE_FOR_IU_RST switch is turned off, the BARRED_CELL_FOR_CSDOMAIN_RST switch is invalid.The parameter modification has no impact on the equipment.When the parameter RNCAP_IMSI_HO_SWITCH is set to 1, the SNA_RESTRICTION_SWITCH check box under the Handover algorithm switch parameter in the MML command SET CORRMALGOSWITCH cannot be

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport

Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The settings of Ps Read & Write Equipment Not involved Not involved The settings of PsI Read & Write Equipment Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Read & Write Equipment Not involved Not involved The settings of PS Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport

equipment.When [PARA]CNProtclVer

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The first byte in the Read & Write Transport Not involved Not involved The first byte in the Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The priority of the co Read & Write Transport Not involved Not involved The priority of the co Read & Write Transport

Not involved Not involved When this parameter iRead & Write Transport






Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The value of RafcTmrRead & Write Equipment Not involved Not involved If the RAN Sharing Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The value of RatcTmrRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The retransmit mechanRead & Write Radio Not involved Not involved The retransmit mechanRead & Write Radio Not involved Not involved The retransmit mechanRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment



Not involved Not involved The parameter modificRead & Write Radio RNC Less than 5 minutes When you set the clocRead & Write Equipment RNC Less than 5 minutes This parameter cannotRead & Write Equipment RNC Less than 5 minutes This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of t Read & Write Transport



Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of t Read & Write Transport

Not involved Not involved The negotiation will bRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio


Not involved Not involved The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio AAL2 Path Less than 5 minutes The parameter modificRead & Write Transport AAL2 Path Less than 5 minutes The resource group muRead & Write Transport IP Path Less than 5 minutes The resource group muRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved Modifying this parameRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved After modification, th Read & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Change this parameterRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Port If the mode is not consis The value of this para Read & Write Transport

RNC The services are interr The negotiation with Read & Write Transport Not involved Not involved The modification of Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of Read & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio




Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved Related traffic record Read & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Services carr Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport RNC Not involved The parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved [MML]SET MRSCOPECTRL[Read & Write Radio

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio

Not involved Not involved The scramble switch sRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport RNC Interrupt the service un Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio

day. Therefore, you must abide this specification to

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The negotiation will bRead & Write Transport



Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio





Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The source IP addres Read & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Less than 10 minutes After this parameter i Read & Write Transport RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Port The time between deacti This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio




RNC The services are interru After modification, t Read & Write Transport RNC The services are interru After modification, t Read & Write Transport RNC The services are interru After modification, t Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio

RNC Less than 10 minutes After this parameter i Read & Write Transport

Not involved Not involved This parameter must bRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Before enabling loa Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved One clock source can oRead & Write Equipment Not involved Not involved None Read & Write Equipment


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved One clock source can Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved For parameter modificRead & Write Transport Not involved Service not interrupted This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved None Read & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment


Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio RNC Less than 5 minutes If the interface board Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Equipment



Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Equipment RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved For parameter modificRead & Write Transport RNC Less than 10 minutes After this parameter i Read & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Equipment RNC Interrupt the service un The parameter cannot Read & Write Equipment

Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The modification o Read & Write Radio

ORT; when [PARA]CNProtclVer

Not involved Not involved This parameter is bas Read & Write Transport Not involved Not involved This parameter is bas Read & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport Not involved Not involved Change this parameterRead & Write Transport RNC Interrupt the service un The parameter cannot Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment Not involved Not involved The parameter modificRead & Write Radio RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved T302 broadcast in th Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The time value of T31Read & Write Radio Not involved Not involved The time value of T31Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The modification of Read & Write Radio

Not involved Not involved The parameter modificRead & Write Radio RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio





Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment









Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio AAL2 Path Less than 5 minutes The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This TRMMAP must beRead & Write Transport Not involved Not involved This TRMMAP must beRead & Write Transport Not involved Not involved This TRMMAP must beRead & Write Transport RNC Not involved The parameter modificRead & Write Transport RNC Not involved The parameter modificRead & Write Transport Not involved Not involved Set TnlBearerType accRead & Write Transport Not involved Not involved Set TnlBearerType accRead & Write Transport NodeB The services are interru Before modifying this Read & Write Radio RNC Interrupt the service un The parameter cannot Read & Write Equipment




Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport


Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When this parameter Read & Write Transport Not involved Not involved When this parameter Read & Write Transport Not involved Not involved When this parameter Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Cell Less than 5 minutes The loopback test may Read & Write Transport Not involved Not involved When the BT is AE Read & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Subsystem Less than 10 minutes This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport

Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport ETHPORT/VP/ If the mode is not set ba This parameter cannotRead & Write Transport



Cell The services are interru The cell should be de Read & Write Radio Not involved Not involved The modification of t Read & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Equipment Not involved Not involved The parameter modificRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio Not involved Not involved This parameter cannotRead & Write Radio



Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When this parameter Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When this parameter Read & Write Transport Not involved Not involved When this parameter Read & Write Transport

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When this parameter Read & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved The parameter modificRead & Write Equipment

Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved When this parameter Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport AAL2 Path Less than 5 minutes The configuration dataRead & Write Transport Not involved Not involved This parameter cannotRead & Write Transport

Services that The services are interr This parameter is bas Read & Write Transport

Not involved Not involved If the setting is inco Read & Write Transport Not involved Not involved Modify the relations Read & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved Modifiying this parameRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment Not involved Not involved None Read & Write Equipment

Not involved Not involved This parameter cannotRead & Write Transport AAL2 Path Less than 5 minutes The configuration dataRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio


Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved None Read & Write Equipment



Not involved Not involved For parameter modificRead & Write Transport

Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Equipment Not involved Not involved To convert a link fro Read & Write Transport Not involved Not involved This parameter cannotRead & Write Transport Not involved Not involved The parameter modificRead & Write Radio Not involved Not involved The parameter modificRead & Write Radio RNC Interrupt the service un The parameter cannot Read & Write Equipment

bsc6810 v200r011c00 parameter reference

Documents