bs en iso 9692-4
DESCRIPTION
BS EN ISO 9692-4TRANSCRIPT
-
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
BRITISH STANDARD BS EN ISO 9692-4:2003
Welding and allied processes Recommendations for joint preparation
Part 4: Clad steels
The European Standard EN ISO 9692-4:2003 has the status of a British Standard
ICS 25.160.40
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
BS EN ISO 9692-4:2003
This British Standard was published under the authority of the Standards Policy and Strategy Committee on 19 August 2003
BSI 19 August 2003
ISBN 0 580 42474 X
National forewordThis British Standard is the official English language version of EN ISO 9692-4:2003. It is identical with ISO 9692-4:2003.
The UK participation in its preparation was entrusted to Technical Committee WEE/1, Definitions and symbols for welding, which has the responsibility to:
A list of organizations represented on this committee can be obtained on request to its secretary.
Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled International Standards Correspondence Index, or by using the Search facility of the BSI Electronic Catalogue or of British Standards Online.
This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.
Compliance with a British Standard does not of itself confer immunity from legal obligations.
aid enquirers to understand the text;
present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
monitor related international and European developments and promulgate them in the UK.
Summary of pages
This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 13 and a back cover.
The BSI copyright notice displayed in this document indicates when the document was last issued.
Amendments issued since publication
Amd. No. Date Comments
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM
EN ISO 9692-4
August 2003
ICS 25.160.40
English version
Welding and allied processes - Recommendations for jointpreparation - Part 4: Clad steels (ISO 9692-4:2003)
Soudage et techniques connexes - Recommandations pourla prparation de joints - Partie 4: Aciers plaqus (ISO
9692-4:2003)Schweien und verwandte Prozesse - Empfehlungen zurSchweinahtvorbereitung - Teil 4: Plattierte Sthle (ISO
9692-4:2003)
This European Standard was approved by CEN on 20 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATIONC O M I T E U R O P E N D E N O R M A LI S A T I O NEUR OP IS C HES KOM ITEE FR NOR M UNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
2003 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.
Ref. No. EN ISO 9692-4:2003 E
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
EN ISO 9692-4:2003 (E)
2
Contents
Foreword......................................................................................................................................................................31 Scope ..............................................................................................................................................................42 Normative references ....................................................................................................................................43 Materials..........................................................................................................................................................44 Types of joint preparation.............................................................................................................................4Table 1 Joint preparation for clad steels welded from both sides....................................................................5Table 2 Joint preparation for clad steels welded from both sides with cladding removal.............................7Table 3 Joint preparation for clad steels welded from one side .......................................................................9Table 4 Joint preparation for clad steels incorporating a backing, insert or cover strip...............................11Bibliography ..............................................................................................................................................................13
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
EN ISO 9692-4:2003 (E)
3
Foreword
This document (EN ISO 9692-4:2003) has been prepared by Technical Committee CEN/TC 121, "Welding", thesecretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby February 2004.
EN ISO 9692 Welding and allied processes Recommendations for joint preparation consists of the followingParts:
Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beamwelding of steels.
Part 2: Submerged arc welding of steels.
Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.
Part 4: Clad steels
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
EN ISO 9692-4:2003 (E)
4
1 Scope
This Part of this European Standard gives recommendations for types of joint preparation for clad steels.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the test and the publications are listed hereafter. Fordated references, subsequent amendments to or revision of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 1011-5, Welding Recommendations for welding of metallic materials Part 5: Welding of clad steels
3 Materials
Joint preparations recommended in this part of EN ISO 9692 are suitable for all types of weldable clad steels.
4 Types of joint preparationThe recommended types of joint preparation and dimensions are specified in Tables 1 to 4.Details concerning welding recommendations for clad steels are given in EN 1011-5.
Figures showing the completed joint are given in Table 4 for clarity.In certain cases, where the welding process may produce a brittle phase e.g. clad steels with cladding of titanium,zirconium and their alloys, a deviation from the weld preparations shown may be necessary.
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
EN ISO 9692-4:2003 (E)
5
Table 1 Joint preparation for clad steels welded from both sidesDimensions in millimetres
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
bb
Gapb
RadiusR
Depth of rootface
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
1.1 t1 18 Single
V-butt weld
With broadroot face
5 <
4 < R < 8
b
2 Backgrinding ormachiningfrom the cladside.
1.2 Single
U-butt weld
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
6
Table 1 Joint preparation for clad steels welded from both sides (concluded)
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
b
Gapb
RadiusR
Depth ofroot face
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
1.3 t1 > 18 Double
V-butt weld
With broadroot face
50
5
4
b
2 6 h = 3
1.4 Single
U-butt weldwith V-root
Key1 Parent metal2 Claddingt2 Cladding thickness
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
7
Table 2 Joint preparation for clad steels welded from both sides with cladding removalDimensions in millimetres
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
,
Gapb
RadiusR
Depth of rootface
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
2.1 t1 18 Single
V-butt weld
50
5
3 b 5
4 R 8
c 2 e 4 Back grindingor machiningisrecommended
Adjacent cladsurfacesshould beprotectedagainstgrindingparticles.
2.2 Single
U-butt weld
Wheresubmergedarc welding isused, thecladdingremoval, e,should be atleast 8 mm.
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
8
Table 2 Joint preparation for clad steels welded from both sides with cladding removal (concluded)
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
Gapb
RadiusR
Depth of rootface
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
2.3 t1 > 18 Double
V-butt weld
50 < < 70 3 b 5 c 2 h t
13 1
e 4
Key1 Parent metal2 Claddingt2 Cladding thickness
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
9
Table 3 Joint preparation for clad steels welded from one sideDimensions in millimetres
Ref.No.
Parentmetal
thicknesst1
Jointpreparation
Cross section Angle
b 1, b 2
Gap
b
Depth ofroot face
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
3.1 t1 < 8 Single
V-butt weld 20 b 1 45
20 b 2 45
2 b 4
e 3
3.2 Single
V-butt weldwith V-root
Table 3 Joint preparation for clad steels welded from one side (concluded)
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
10
Ref.No.
Parentmetal
thicknesst1, t2
Jointpreparation
Cross section Angle
b 1, b 2
Gap
b
Depth ofroot face
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
3.3 t1 18
1 t2 4
Pipe weld 30 b 1 40
20 b 2 45
1 b 4
c 2
e Suitable forpipewelding
Key1 Parent metal2 Claddingt2 Cladding thickness
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
11
Table 4 Joint preparation for clad steels incorporating a backing, insert or cover stripDimensions in millimetres
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
aa
Gapb
RadiusR
Depth ofroot face
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
4.1 t1 18 Single
V-butt weld
50 a 70
b 3 c 2 In order tocomplete thejoint, an insertof dimensionsd (b + 10)t2 isplaced into thejointpreparation onthe clad side ofthe joint, aftercladdingremoval.
t3 t2
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
12
Table 4 Joint preparation for clad steels incorporating a backing, insert or cover strip (concluded)Dimensions in millimetres
Ref.No.
Parentmetal
thickness
t1
Jointpreparation
Cross section Angle
aa
Gapb
RadiusR
Depth ofroot face
c
Depth ofpreparation
h
Claddingremoval
e
Remarks
4.2 t1 18 Single
V-butt weld
50 a 70
b 3
R > 10
c 2 The claddingis removedover a widthd, where
d b + 15.
Key1 Parent metal2 Cladding3 Cover strip4 Insertt2 Cladding thickness
Licensed Copy: Tom Magee, Howden Power, 06 March 2004, Uncontrolled Copy, (c) BSI
-
EN ISO 9692-4:2003 (E)
13
Bibliography
List of ISO corresponding standards to European standards given in clause 2
European standardgiven in clause 2
ISO Technical Reportcorresponding
Title of ISO Technical Report
EN 1011-5 ISO TR 17671-5 Welding Recommendation for welding of metallic materials Part 5: Welding of clad steels
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
-
BS EN ISO 9692-4:2003
BSI
389 Chiswick High Road
London
W4 4AL
BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.
Revisions
British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.
It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.
BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: [email protected]. Standards are also available from the BSI website at http://www.bsi-global.com.
In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.
Information on standards
BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: [email protected].
Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: [email protected].
Information regarding online access to British Standards via British Standards Online can be found at http://www.bsi-global.com/bsonline.
Further information about BSI is available on the BSI website at http://www.bsi-global.com.
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.
This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.
Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: [email protected].
Lice
nsed
Cop
y: T
om M
agee
, How
den
Powe
r, 06
Mar
ch 2
004,
Unc
ontro
lled
Copy
, (c) B
SI
Document BookmarksDocument Bookmarks
WMDate: 06 March 2004edtDisclaimer: This is an uncontrolled copy. Ensure use of the most current version of this document by searching British Standards Online at bsonline.techindex.co.ukedtMessage: A single copy of this British Standard is licensed toedtBS: British StandardWMName: Tom Magee