brochures-ip 56 - 66 series.pdf

The driving force behind today's industry.

SERIESindustrial switchgear

56&&66

tech

nica

l data

clipsal.com

INTERNATIONAL

Products of Gerard Industries Pty LtdABN 27 007 873 529

Head Office12 Park Terrace, BowdenSouth Australia, 5007Telephone: +61 8 8269 0511Facsimile: +61 8 8340 1724Internet: clipsal.comE-Mail: [email protected]

International EnquiresHead Office Export DepartmentTelephone: +61 8 8269 0587Facsimile: +61 8346 1678

International RepresentativesAfricaEast AfricaClipsal East Africa (Pty) LtdTelephone: +254 11 220908Facsimile: +254 11 226417E-Mail: [email protected]

South AfricaClipsal South Africa (Pty) LtdTelephone: +27 11 314 5200Facsimile: +27 11 314 5295E-Mail: [email protected]

ZimbabweClipsal Zimbabwe (Pvt) LtdTelephone: +263 73 2483Facsimile: +263 73 2517

ArgentinaControles Tecnova S.A.Telephone: +54 114 207 9534Facsimile: +54 114 206 0228E-Mail: [email protected]

ChinaClipsal (China) LtdTelephone: +86 755 246 1122Facsimile: 86 755 246 1778E-Mail: [email protected]

GeorgiaClipsal ContactTelephone: +995 32 65 5599Fax: +995 32 65 6699E-Mail: [email protected]

GreeceClipsal Hellas S.A.Telephone: +30 1 993 9165Facsimile: +30 1 993 9730E-Mail: [email protected]

Hong KongClipsal Asia LtdTelephone: +852 2487 0261Facsimile: +852 2480 5865E-Mail: [email protected]

IndiaClipsal Industries India PVT LtdTelephone: +91 11 647 3251Facsimile: +91 11 621 3179

IndonesiaPt Clipsal Graha NusantaraTelephone: +62 21 630 6430Facsimile: +62 21 630 7729E-Mail: [email protected]

MalaysiaClipsal Malaysia Sdn BhdTelephone: +60 3 551 91111Facsimile: +60 3 551 94378E-Mail: [email protected]

Middle East U.A.EClipsal Middle EastTelephone: +971 6 557 0777Facsimile: +971 6 557 0333E-Mail: [email protected]

New ZealandAucklandClipsal Industries (NZ) LtdTelephone: +64 9 576 3403Facsimile: +64 9 576 1015E-Mail: [email protected]

ChristchurchClipsal Industries (NZ) LtdTelephone: +64 3 379 5368Fax: +64 3 379 9430

WellingtonClipsal Industries (NZ) LtdTelephone: +64 4 237 0550Facsimile: +64 4 237 6161

PakistanClipsal Pakistan (PVT) LtdTelephone: +92 21 506 7278Facsimile: +92 21 506 3369E-Mail: [email protected]

PhilippinesClipsal Philippines, Inc.Telephone: +63 2 723 9562Facsimile: +63 2 721 4389E-Mail: [email protected]

SingaporeClipsal Singapore Pte LtdTelephone: +65 415 3288Facsimile: +65 415 3289E-Mail: [email protected]

Sri LankaClipsal Sri Lanka (Private) LtdTelephone: +94 74 792 124Facsimile: +94 74 792 126E-Mail: [email protected]

TaiwanClipsal (Taiwan) Co LtdTelephone: +886 2 255 83456Facsimile: +886 2 255 83000E-Mail: [email protected]

ThailandClipsal Thailand LtdTelephone: +662 952 5338Facsimile: +662 952 5337E-Mail: [email protected]

United KingdomClipsal Ltd (UK)Telephone: +44 1494 521111Facsimile: +44 1494 523333E-Mail: [email protected]

United States of AmericaClipsal USA IncorporatedTelephone: +1 858 674 2555Facsimile: +1 858 451 9777E-Mail: [email protected]

VietnamHo Chi Minh CityClipsal - VTECTelephone: +848 856 3002Facsimile: +848 856 3006E-Mail: [email protected]

Hanoi CityClipsal - VTECTelephone: +84 4 971 3423Facsimile: +84 4 821 9054E-Mail: [email protected]

Gerard Industries Pty Ltd reserves the right to changespecifications, modify designs and discontinue itemswithout incurring obligation and whilst every effort ismade to ensure that descriptions, specifications andother information in this catalogue are correct, nowarranty is given in respect thereof and the companyshall not be liable for any error therein.

O/N 0901 Dec 01/02

©Copyright Gerard Industries Pty LtdPrinted by Custom Press Pty Ltd (08) 8346 7999

You can find this brochure and manyothers online in PDF format at:clipsal.comFollow the links off the home page oraccess the following page directly:clipsal.com/wat_lib_pdf.cfm

clipsal.com

industrial switchgear

SERIES

C O N T E N T Spage

66 Series Industrial Switchgear

66CV Switched Socket Outlets

66P Series Straight Plugs

Internal Socket and Pin Housings

66P Series Pin Configurations

Technical Information

Lloyd’s Register Approvals for 56 Series

Department of Industrial Relations Approvals for56 Series

Plug Configurations

Socket Configurations

Technical Drawings

International Protection Ratings

Technical Terms

Technical Tables

Useful Formulae

Abbreviations

Common Conversion Factors

Numerical Index

C O N T E N T S

2

8

10

12

14

15

17

18

19

21

22

23

25

27

28

29

31

32

33

34

37

38

39

40

56 Series Industrial Switchgear

Introduction

Ready Reference Guide

Chemical Comparisons

Combination Switched Socket Outlets

Surface Socket Outlets

International Surface Socket Outlets

Socket Configuration Line Drawing Chart

Appliance Inlets

Surface Switches

Changeover and Reversing Switches

Push-button Control Stations

Key Operated Switches

Timer Switches

New Timer Switches

Sunset Switches Premium

Sunset Switches Economy

Mounting Feet

Condensation Drain

Padlocking Clips

Angle and Straight Plugs

International Angle and Straight Plugs

Plug Configuration Line Drawing Chart

Extension Sockets andAppliance Connectors

Pendant Conversion Kits

Pendant Outlets and High Pressure Gaskets

Special Combinations and Modules

Transformers

Wall Lights

Mounting Enclosures

Anti-Corrosion Enclosure Screws

Bridges and Dividers

Mounting Enclosure Lids

Pre-Drilled Mounting Enclosure Lids

Switchgear Cover Assemblies

Adaptable Enclosures

Junction Boxes

Two Aperture Enclosure IP66

page

56 66&&

46

47

48

49

50

95

96

97

98

99

INTERNATIONAL

Computer Surface Modules

Flush Surrounds

56 Series Distribution Boards

Armoured Cable Junction Box

Motor Starters

M56 Series Cast Metal Switches

41

42

43

44

45

THE DRIVING FORCE BEH

56industrial switchgear

&66 SERIESDesigned to satisfy customer needs,

precisely engineered and carefully

manufactured, Clipsal Industrial Switchgear is

as versatile as your requirements.

Industrial switchgear, being one of the most im-

portant components of industry, has to be tough,

safe, able to take hard knocks and give reliable

performance under many adverse conditions.

The Clipsal 56 and 66 Series satisfies these

challenges with the use of durable engineering

plastics.

The 56 Series has been tested for protection

against ingress of water and dust to International

Protection Rating IP56, and in many instances

exceeds this level of protection.

It is testimony to the excellence in both manu-

facture and performance of 56 and 66 Series

Industrial Switchgear.

QualityEndorsedCompany

ISO 9002LIC 413

StandardsAustralia

HIND TODAY’S INDUSTRY


SERIES56 56 Series Colour Range

For over a decade the Clipsal 56

Series has enjoyed a reputation for

excellent performance in harsh industrial

environments.

All products in the 56 Series are

available in light grey UV stabilised rigid

polycarbonate. The light grey series has

excellent strength compared to other

compatible plastic products.

There is, however, no economical

plastic material available that provides

maximum impact strength as well as a

high degree of chemical resistance.

Clipsal has chosen not to compro-

mise on either count and instead offers

two high performance chemical resistant

ranges for environmentally aggressive

locations.

The UV and chemical resistant

orange and white version is suitable for

indoor and outdoor applications, such as

chemical plants, timber and paper

processing plants and laboratories.

The new chemical resistant grey

range of sockets, switched socket

outlets and covers has been specifically

designed for indoor food environments

where aggressive alkalis cleaners are

Dust-resistant,Hoseproof and UV Resistant

Because its tough enclosure casing

is dust-resistant, hoseproof and UV

resistant, the 56 Series is suitable for

heavy industrial environments.

The aesthetic appearance of the 56

Series makes it the ideal choice

for installation in commercial facilities

such as television studios, shopping

centres and warehouses. What’s more,

56 Series products are just as accept-

able alongside a public or domestic

swimming pool.

Safety in Operation

For safety’s sake all of

the switches in the range

have been equipped with

facilities for double pad-

locking. When plugs are

removed, the socket flap

automatically locks into

place, preventing dust or

water from entering.

used, such as dairies, abattoirs and

food processing plants.

For further technical details refer pg 10.

PVC Solvent BondingCompatibility

All Clipsal 56 Series Enclosures are

manufactured from robust UV stabilised

PVC and can be solvent bonded to

standard electrical PVC conduit

accessories.

Transparent Plastic Materials

The introduction of transparent

materials to the 56 Series enables the

inspection and checking of the compo-

nents pin/socket configuration and

wiring at a glance, while still providing

protection against the elements.

Designed to Mix and Match

What suits one industry might not be

the perfect match for another. That’s why

the 56 Series was specifically designed

to mix and match. There is an extensive

choice of modules available, including

switches, sockets, photo electrical cells

and residual current devices.

Clipsal mounting enclosures range

in size from 1 to 16 gang. This allows

assemblies to be customised - from a

simple switch station to a large electrical

control panel.

Accessories can be ordered Less

Enclosure (back box) by simply

specifying LE after the Catalogue

Number.

4

56 Series Modules - designed to mix and match.

Clear indication of switchposition.

Modular system with 1 to 16gang arrangements tosatisfy your every need.

Visible gasket - yourguarantee of sealing.

Raised lettering for longlife of markings.

Optional neon indicator.

Captive stainless steelcombination head fixingsfor corrosion resistanceand effortless installation.

Padlock on/off facility.

Available in high impact Greyor Chemically ResistantOrange/White and Greyfinishes.

Mechanical interlock optionalto ensure power disconnec-tion before insertion orremoval of the plug.

Transparent flap clearlyshows pin configuration.

Flap automatically closesto ensure IP rating ismaintained.

5

Clear Pin SurroundProviding quick and sure location of plug insocket and protection of pins.

Wide Lock RingCan be tightened and unscrewed with ease,even with a gloved hand. Provides positivesealing with an in built sponge-typegasket.

Sturdy Terminal HousingFor durability and years of reliable service.

Stainless Steel Combination HeadScrews

For corrosion resistance and easy installation.

Transparent Polycarbonate BodyAllows instant inspection of connections.

2

1

Features

Cable gland extremely flexible with positive gripto ensure dependable sealing.

Available in straight and angled versions. Angledversions enable a neat cable run straight downrather than directly out of the back of plug top.

Transparent body allows instant visual checkingof connections.

Wide lock ring can be tightened and unscrewedwith ease, even with a gloved hand. Providespositive sealing with inbuilt moulded rubbergasket.

Clear pin surround provides quick and surelocation of plug in socket and protection of pins.

Internal cable clamp grips two ways to preventcable twisting.

Captive stainless steel combination head screwsoffer corrosion resistance and easy installation.

Sturdy terminal housing for durability and yearsof reliable service.

IP66 Rating (in accordance with AS1939)prevents water and dust ingress.

1 2 3 4 5 6 7 8

9

8

7

6

5

2

56 Series Plugs - for strength and easy installation.

33

4

6

Clipsal design, engineering andprecision brings you the revolutionary66 Series of Combination SwitchedSocket Outlets and Plugs for 50 and 63amp., 4, 5 or 7 pin heavy-duty appli-ances, such as welders, pumps, andmobile conveyors.

Until recently 50 and 63 amp. socketoutlets and plugs were constructed withmetal clad housings, which, in manysituations, encounter drawbacks withtheir heavyweight, time consuminginstallation and susceptibility to corro-sion.

66 Series Switched Socket Outletsand Plugs solve these problems andoffer many other benefits.

Major features of the 66CV SwitchedSocket Outlets are their robust PVCback box and polyester cover thatprovide excellent chemical and highimpact resistance as well as UV stability,in a neat, compact unit that’s quickerand easier to install. 66P Plugs aremanufactured from fully moulded,transparent polycarbonate or resistantorange polyester to offer the samedegree of strength and resistance tochemicals and UV rays.

For convenience and safety, boththe switched socket outlets and plugscan be easily used with gloved hands.

An internal interlock is fitted to theoutlet to prevent insertion or withdrawalof the plug (provided the plug is fittedwith an interlock facility) while the switchis in the ‘on’ position.

66CV Series Combination SwitchedSocket Outlets also incorporate apadlock facility in the ‘off’ position foradded safety and security.


SERIES66

IP66 protection in accordancewith AS 1939 for the Combina-tion Switched Socket Outlet andalso when engaged with a plug.

Separate back box with rearwiring facility for easy installationof large diameter cables.

1 x M40 entry (top) and 2 x M32entries (bottom) to assist cabletermination.

Large switch knob and socketoutlet flap for easy operationeven with gloved hand.

Socket outlet flap includes aheavy spring assembly toensure IP66 integrity.

Configurations of sockets andkeyways in accordance with AS3123-1987.

Stainless steel, combinationhead, captive cover screws forcorrosion resistance and easyinstallation.

Switch rated for motor duty,AC23 in accordance with AS3947.3.

Standard colour - Grey. Resis-tant Orange optional. Doubleinsulated for operatorsafety.

Interior assembly is completelyremovable to assist with cableentry and termination of thelarge conductors required forthe unit.

Features

•

•

•

•

•

•

•

•

•

•

Make light work of installationswith 66 Series Combination Switched

Socket Outlets.

7

3

4

5

22

1

3 8

9

6Clear Pin SurroundProviding quick and sure location of plug insocket and protection of pins.

Wide Lock RingCan be tightened and unscrewed with ease,even with a gloved hand. Provides positivesealing with an inbuilt sponge-typegasket.

Sturdy Terminal HousingFor durability and years of reliable service.

Stainless Steel Combination Head ScrewsFor corrosion resistance and easy installation.

Transparent Polycarbonate BodyAllows instant inspection of connections.

Internal Cable ClampFast fixing and gripstwo ways, preventingcable from twisting.

IP66 Rating (in accordance with AS1939)When engaged in the 66CV switched socket outletwith the hydrant ring fully engaged, an InternationalProtection Rating of IP66 is achieved.

Cable GlandExtremely flexible with positive grip to ensure dependablesealing.

Gland Nut with 50mm threaded cable entryFor alternative facility termination.Note - IP Ratings only apply to cable terminations asper wiring instructions.

7

Features

1 2 3 4 5 6 8 9

66P Series pulls the plug on heavy metal.

8

Combination Switched Socket Outlets 12

Versions from 250V 10A to 500V 50A.All internal phase connections between switches and sockets are factorywired.Sockets include a dustproof and hoseproof flap with snap latch.

Surface Socket Outlets 14

Sockets include a clear dustproof and hoseproof flap with snap latch.Tough polyester terminal housings.

Appliance Inlets 15

Screwed lock ring secures extension sockets and appliance connectorsand ensures IP rating.Impact resistant and UV stabilised housings.Downward facing, angled pin housing available on 500V units.

Surface Switches 16

Versions from 250V 10A to 500V 63A.Positive rotary switch action.Provision for 2 padlocks.

Key Operated Switches 20

Versions from 250V 20A to 500V 50A.Available in 3 versions - Standard Security, Medium Security and HighSecurity.Locking in ‘off’ and ‘on’ positions.

Timer Switches 22

Available in digital and mechanical versions.Digital and mechanical versions available with 150 hour battery backup.

Sunset Switches 24

Automatically turns lights on when natural light falls below a predeterminedlevel.Suitable for surface or flush mounting.

The following Reference Guide has been included to help you quickly findthe most commonly used 56 and 66 Series Industrial Switchgear.

For fast product selectionREADY REFERENCE GUIDE

56 SERIES

••

•

•••

•

••

•••

••

•

••

•

•

Versions from 250V 10A to 500V 50A.

9

Angle and Straight Plugs 26

Screw ring secures plug to socket outlet and ensures IP rating.Transparent centre body for instant visual checking of connections.Cable clamp grips 2 ways to prevent cable twisting.

Extension Sockets and Appliance Connectors 28

Impact resistant, UV stabilised mouldings3 phase versions include a cap that maintains IP rating when accessoryis not in use.

Combination Switched Sockets with RCD 30

RCD constantly monitors and compares flow in Active and Neutral circuits.Enable quick disconnection of power in case of emergency.Provide stand alone protection or multiple protection of socket outlet.Neon indicates that RCD is protecting outlet.Internal phase connections between switches and sockets are factorywired.

Mounting Enclosures 34

1, 2, 3, 4, 6, 8, 9 and 16 gang enclosures available.Moulded in UV stabilised rigid PVC.Includes ample conduit and cable entries.Plenty of wiring room for ease of installation.

Adaptable Enclosures 36

Supplied complete with gear tray.Transparent deep lids, sealing screws and gasket supplied as standard.8 mounting points on gear tray.Impact resistant and UV stabilised base, gear tray and lid.

Combination Switched Socket Outlets 42

Versions from 500V 50A to 500V 63A.Large switch knob and socket flap for easy operation, even with glovedhands.Interlock prevents insertion or withdrawal of plug when switch is in the ONposition.

Straight Plugs 42

Screwed Hydrant ring secures plug to socket outlet and ensures IP rating.Transparent centre body for instant visual checking of connections.Cable clamp grips 2 ways to prevent cable twisting.

66 SERIES

•••

••

•••

•

••••

••••

••

•

•••

10

CHEMICAL RESISTANCEIt is well documented that Clipsal's

standard grey products are ideal formost applications. For those environ-ments where harsh chemicals are usedthat require special chemical resistantproperties, Clipsal offers as an option oftwo product ranges:1) Chemical Resistant Orange (RO)/ Chemical Resistant White (RW) and2) Chemical Resistant Grey (CG)

TEMPERATURE RESISTANCEThe temperature range of the 56

Series products are limited by twoaspects;1) the material used in mouldings and2) the operating temperature of theelectrical components.

The material type limits the use ofthe standard product to -25oC to +75oC.

For temperatures outside of theselimits, and for information on the heatgenerated by the electrical compo-nents, please contact your Clipsal rep.

These two ranges have beendeveloped by leading plastic materialmanufacturers and offer greaterresistance to chemical attack thancommon plastic materials with minimalreduction in impact strength.

To make selection of the correctproduct easy, we provide the followinginformation and table as a guide.

Chemical Resistant Orange (RO)/Chemical Resistant White (RW) offersresistance to a wide range of chemicaltypes. It is ideal for corrosive and

industrial chemicals, animal fats, oils,solvents and lubricants.

This material has excellent UVresistance for use outside.

Chemical Resistant Grey (CG) isideal in food processing and medicalareas exposed to strong cleaning Alkalis(Sodium Hydroxide or Caustic Soda)are used. It should be noted that thematerial used in this product is notrecommended for outside use due tolow UV resistance.

PLASTIC COMPARISON CHART

Applications Standard Resistant ResistantGrey Orange Dark Grey

Outdoor use - mechanical properties A A DOutdoor use - colour properties B B DIndoor use A A ASaltwater environments A A DThermal properties A A BLightweight A A AHigh rigidity B B CImpact resistant A B C

This table should be used as a guide only. Any end user should test to evaluate the suitability of any product in a specific application.A - EXCELLENT B - GOOD C - FAIR D - POOR

56C532(CG) 56C532(RO)56C310(RW)

11

CHEMICAL COMPARISONS

This table should be used as a guide only. Any end user should test to evaluate the suitability of any chemical with any plastic.

A - EXCELLENT Recommended; no adverse effects after extended exposure.B - GOOD Acceptable, minimal loss of mechanical properties after long periods of exposure.C - FAIR Marginal acceptability; loss of mechanical properties after long periods of exposure.D - POOR Not recommended for use.

Product Type (colour) All Mounting Grey Resistant Orange (RO) Dark GreyEnclosures Transparent Resistant White (RW) (CG) Covers(ie Back Box) Covers and Plugs Covers and Plugs Limited Range

Acids

Weak SolutionsHydrochloric 10% A A A ANitric 10% A A A BConcentrateSulphuric 100% A D D D

Alkalis

Weak SolutionsSodium Hydroxide 10% (Caustic Soda) A D B AConcentratePotassium Hydroxide 100% A-B D D A

Automotive

Petroleum A D A DLubricating Oils D A CHydraulic Oil D A C

Solvents

Aliphatic Hydrocarbons (Alkanes)Methane B A APropane A A AAlcoholsEthylene Glycol A A AGlycerol (Glycerin) A C B AMethyl Alcohol (Methanol) A D B DEthyl Alcohol (Ethanol) A A A DAminesAniline D D DAromatic HydrocarbonsMethyl Benzene D D B DXylene D D B DEthersDimethyl Ethyl A A AKetonesAcetone A D C DAcetophenone D D C DEthyl Methyl Ketone D D C D

Miscellaneous

Detergent A A A DInorganic SaltsMagnesium Sulphate A A AOxidising AgentsWeak SolutionSodium Hypochlorite 5% A A A AStrong SolutionHydrogen Peroxide 30% A A A AWaterAmbient A A A AHot >60oC C A B CSteam D D D D

12

COMBINATION SWITCHEDSOCKET OUTLETSThe Clipsal range of three phase

combinations includes two module unitsand one-piece cover models.

All internal phase connectionsbetween switches and sockets arefactory wired.

The 4 and 5 pin, 10 and 20A one-piece cover models have integral wiringbetween the switch and socket outlet.Installation time is reduced by not havingto check factory wire terminations.There is also no likelihood of wires fallingout during installation.

Combination sockets feature a cleardustproof and hoseproof flap with asnap catch latch. Both the supersedednon IP56 plain plugs and the currentIP66 retention ring plugs can beaccommodated. 250V, 110V and extralow voltage two module combinationsare also available.

Earth and neutral connectorsaccommodating3 x 6mm2 cables aresupplied with 500Vmodels.

Catalogue No. of I the Ui/Ue. I

Number swit. poles (A) (V)

56C210 1 10 25056C215/32 1 15 3256C3/110 1 10 11056C310RP 1 10 25056C310 1 10 25056C310HD 1 10 25056C310L 1 10 25056C315 1 15 25056C315HD 1 15 25056C320 1 20 25056C332 1 32 25056C310D 2 10 25056C315D 2 15 25056C410 3 10 50056C416K 3 16 500

56C420 3 20 50056C432 3 32 50056C440 3 40 50056C450 3 50 50056C510 3 10 50056C520 3 20 50056C532 3 32 50056C540 3 40 50056C550 3 50 50056C610 3 10 500

20 cont56C710 3 10 500

20 cont56C720 3 20 500

20 cont

56CV420 56C532 56C310

Catalogue No. of I the Ui/Ue. I


56CV310 1 10 25056CV310HD 1 10 25056CV315 1 15 25056CV315HD 1 15 25056CV410 3 10 50056CV416K 3 16 500

56CV420 3 20 50056CV432 3 32 50056CV440 3 40 50056CV450 3 50 50056CV510 3 10 50056CV520 3 20 50056CV532 3 32 50056CV540 3 40 50056CV550 3 50 50056CV610 3 10 500

20 cont56CV710 3 10 500

20 cont56CV720 3 20 500

20 cont

•

•

•

•

•

•

•

With Neon - add N to CatalogueNumber - e.g. 56C410 becomes56C410N.Less Enclosure - add LE to Cata-logue Number e.g. 56C410 becomes56C410LE.Versions with key operated switchesavailable to special order.Internal interlock facility available onthree phase, one piece covercombinations - add I to CatalogueNumber e.g. 56CV410 becomes56CVI410.Resistant Orange - add RO toCatalogue Number e.g. 56CV410becomes 56CV410RO.Resistant White - add RW toCatalogue Number e.g. 56C410becomes 56C410RW.Two piece versions available inChemical Grey. Chemical Grey -add CG to Catalogue Number e.g.56C410 becomes 56C410CG.

56C520(CG) 56C520(RO)

Options available

13

TWO PIECE

Ie (A) Utilisation Category M Number of Size in mm2 IP O/A * Dims. Matching Plug Matching Plug Socket

AC21A AC22A AC23A Rating Sockets Min. Max/cont. Rating (H) x (W) x (D) Straight Angle Config.

10 8 8 M80 2 Parallel Flat 1.5 6 66 204x101x80 56P210 D15 10 8 M80 2 Polarised 1.5 6 66 204x101x80 56P215/32 E10 8 8 M80 2 Round & Flat Earth 1.5 6 66 204x101x80 56P3/110 J10 8 8 M80 3 Round 1.5 6 66 204x101x80 56P310RP G10 8 8 M80 3 Flat 1.5 6 66 204x101x80 56P310 A10 10 10 M260 3 Flat 1.5 6 66 204x101x104 56P310 A10 8 8 M80 2 Flat & Round Earth 1.5 6 66 204x101x80 56P310L C15 10 8 M80 3 Flat 1.5 6 66 204x101x80 56P315 B15 15 15 M260 3 Flat 1.5 6 66 204x101x104 56P315 B20 20 20 M260 3 Round 2.5 6 66 204x101x104 56P320 56PA320 H32 32 20 M260 3 Round 6 16 66 204x101x104 56P332 56PA332 I10 10 10 M220 3 Flat 1.5 16 66 204x101x104 56P310 A15 15 15 M220 3 Flat 1.5 6 66 204x101x104 56P315 B10 10 10 M100 4 Round 1.5 6 66 204x101x104 56P410 56PA410 K16 16 16 M100 4 Round 1.5 6 66 204x101x104 56P416K 56PA416K M

(unique key configuration)

20 20 20 M100 4 Round 2.5 6 66 204x101x104 56P420 56PA420 L32 32 20 M100 4 Round 4 16 66 204x101x104 56P432 56PA432 N40 32 20 M100 4 Round 10 16 66 204x101x104 56P440 56PA440 O50 50 25 M200 4 Round 10 16 66 204x101x104 56P450 56PA450 P10 10 10 M100 5 Round 1.5 6 66 204x101x104 56P510 56PA510 Q20 20 20 M100 5 Round 2.5 6 66 204x101x104 56P520 56PA520 R32 32 20 M100 5 Round 4 16 66 204x101x104 56P532 56PA532 S40 32 20 M100 5 Round 10 16 66 204x101x104 56P540 56PA540 T50 50 25 M200 5 Round 10 16 66 204x101x104 56P550 56PA550 U10 10 10 M100 4 Round Power 1.5 6/2.5 66 204x101x104 56P610 56PA610 V

2 Round Control10 10 10 M100 5 Round Power 1.5 6/2.5 66 204x101x104 56P710 56PA710 W

2 Round Control20 20 20 M100 5 Round Power 2.5 6/2.5 66 204x101x104 56P720 56PA720 X

2 Round Control

Note: AC utilisation categories to AS3947.3I the- Conventional Enclosed Thermal CurrentUi - Insulation VoltageU

e - Operational Voltage

Refer to page 45 for explanation ofsocket configurations.* Refer rear of Catalogue for further details.

ONE PIECE

Ie (A) Utilisation Category M Number of Size in mm2 IP O/A * Dims. Matching Plug Matching Plug Socket

AC21A AC22A AC23A Rating Sockets Min. Max/cont. Rating (H) x (W) x (D) Straight Angle Config.

10 8 8 M80 3 Flat 1.5 6 66 204x101x80 56P310 A10 10 10 M260 3 Flat 1.5 6 66 204x101x104 56P310 A15 10 8 M80 3 Flat 1.5 6 66 204x101x80 56P315 B15 15 15 M260 3 Flat 1.5 6 66 204x101x104 56P315 B10 10 10 M110 4 Round 1.5 10 66 204x101x104 56P410 56PA410 K16 16 16 M100 4 Round 1.5 6 66 204x101x104 56P416K 56PA416K M

(unique key configuration)

20 20 20 M110 4 Round 2.5 10 66 204x101x104 56P420 56PA420 L32 32 20 M100 4 Round 4 16 66 204x101x104 56P432 56PA432 N40 40 20 M100 4 Round 6 16 66 204x101x104 56P440 56PA440 O50 50 25 M200 4 Round 10 16 66 204x101x104 56P450 56PA450 P10 10 10 M110 5 Round 1.5 10 66 204x101x104 56P510 56PA510 Q20 20 20 M110 5 Round 2.5 10 66 204x101x104 56P520 56PA520 R32 32 20 M100 5 Round 4 16 66 204x101x104 56P532 56PA532 S40 40 20 M100 5 Round 6 16 66 204x101x104 56P540 56PA540 T50 50 25 M200 5 Round 10 16 66 204x101x104 56P550 56PA550 U10 10 10 M100 4 Round Power 1.5 6/2.5 66 204x101x104 56P610 56PA610 V

2 Round Control10 10 10 M100 5 Round Power 1.5 6/2.5 66 204x101x104 56P710 56PA710 W

2 Round Control20 20 20 M100 5 Round Power 2.5 6/2.5 66 204x101x104 56P720 56PA720 X

2 Round Control

Cond. Term.

Cond. Term.

14

SURFACE SOCKET OUTLETSClipsal Surface Socket Outlets

range in size from 250V 10A to 500V50A.

All sockets feature hoseproof anddust resistant flaps with automatic snapcatch latches. The transparent flapenables instant visual inspection ofsocket condition and pin configuration.

The full range of sockets accommo-date both the superseded IP56 plainplugs and the current IP66 retention ringplugs in order to rationalise the numberof variations required.

Earth and neutral connectorsaccommodating 3 x 6mm2 cable aresupplied with all 500V models.

Terminal housings are moulded intough polyester to minimise damage.

Options available • Less Enclosure - add LE to

Catalogue Number e.g. 56SO410becomes 56SO410LE.

• Resistant Orange - add RO toCatalogue Number e.g. 56SO410becomes 56SO410RO.

• Resistant White - add RW toCatalogue Number e.g. 56SO310becomes 56SO310RW.

Note: 56 Series 250V and extra lowvoltage sockets effectively accommo-date Clipsal 439 Series Plug Tops. TheIP56 Rating is ensured when the 437PRCoupling Ring is used in conjunction withthe Clipsal 439 Plug Top. Alternatively,the Clipsal 56P or 56PA Plugs will alsoensure the IP66 integrity.

250V & Extra LowVoltage Sockets

500V 3 Phase Sockets

Catalogue Ithe Ui Number of Cond. Term in mm2 IP O/A * Dims. Material Plug Matching Plug SocketNumber (A) (V) Sockets Min. Max/cont. Rating (H) x (W) x (D) Straight Angled Config.

56SO210 10 250 2 Parallel Flat 1.5 16 66 107x101x80 56P210 D56SO215/32 15 32 2 Pin Polarised 1.5 6 66 107x101x80 56P215/32 E56SO3/110 10 110 2 Round & Flat Earth 1.5 6 66 107x101x80 56P3/110 J56SO310RP 10 250 3 Round 1.5 6 66 107x101x80 56P310RP G56SO310 10 250 3 Flat 1.5 6 66 107x101x80 56P310 A56SO315 15 250 3 Flat 1.5 6 66 107x101x80 56P315 B56SO310A 10 250 3 Flat auto-switched D/P 1.5 10 66 107x101x80 56P310 A56SO315A 15 250 3 Flat auto-switched D/P 1.5 10 66 107x101x80 56P315 B56SO310L 10 250 2 Flat & Round Earth 1.5 6 66 107x101x80 56P310L C56SO320 20 250 3 Round 2.5 6 66 107x101x104 56P320 56PA320 H56SO320F 20 250 3 Flat Pins 2.5 6 66 107x101x80 56P320F - F56SO332 32 250 3 Round 6 16 66 107x101x104 56P332 56PA332 I56SO410 10 500 4 Round 1.5 6 66 107x101x104 56P410 56PA410 K56SO416K 16 500 4 Round 1.5 6 66 107x101x104 56P416K 56PA416K M

(unique key configuration)56SO420 20 500 4 Round 2.5 6 66 107x101x104 56P420 56PA420 L56SO432 32 500 4 Round 4 16 66 107x101x104 56P432 56PA432 N56SO440 40 500 4 Round 6 16 66 107x101x104 56P440 56PA440 O56SO450 50 500 4 Round 10 16** 66 107x101x104 56P450 56PA450 P56SO510 10 500 5 Round 1.5 6 66 107x101x104 56P510 56PA510 Q56SO520 20 500 5 Round 2.5 6 66 107x101x104 56P520 56PA520 R56SO532 32 500 5 Round 4 16 66 107x101x104 56P532 56PA532 S56SO540 40 500 5 Round 6 16 66 107x101x104 56P540 56PA540 T56SO550 50 500 5 Round 10 16** 66 107x101x104 56P550 56PA550 U56SO610 10 500 4 Round Power 1.5 6/2.5 66 107x101x104 56P610 56PA610 V

2 Round Control56SO710 10 500 5 Round Power 1.5 6/2.5 66 107x101x104 56P710 56PA710 W

2 Round Control56SO720 20 500 5 Round Power 2.5 6/2.5 66 107x101x104 56P720 56PA720 X

2 Round Control

** - L1, L2, L3 Cable Size Max. 25 mm2

Ithe - Conventional Enclosed Thermal CurrentUi - Insulation Voltage* Refer rear of Catalogue for further details.

56SO42056SO310

Refer to page 45 for explanation ofsocket configuration.

15

Spare PartsInternal Socket Housings

A full range of replacement internalsocket housings is available for 3 phase56SO models. They eliminate the needto replace an entire unit if only theinternal socket housing is damaged.Socket terminal housings are moulded indurable polyester.

Catalogue Ithe Ui Number of Cond. Term size in mm2Socket

Number (A) (V) Sockets Min. Max/cont. Config.

56SO320G 20 250 3 Round 2.5 6 H56SO332G 32 250 3 Round 6 16 I56SO410G 10 500 4 Round 1.5 6 K56SO416G 16 500 4 Round 1.5 6 M

(unique key config.)

56SO420G 20 500 4 Round 2.5 6 L56SO432G 32 500 4 Round 6 16 N56SO440G 40 500 4 Round 10 16 O56SO450G 50 500 4 Round 10 16 P56SO510G 10 500 5 Round 1.5 6 Q56SO520G 20 500 5 Round 2.5 6 R56SO532G 32 500 5 Round 6 16 S56SO540G 40 500 5 Round 10 16 T56SO550G 50 500 5 Round 10 16 U56SO610G 10 500 4 Round Power 1.5 6/2.5 V

2 Round Control56SO710G 10 500 5 Round Power 1.5 6/2.5 W

2 Round Control56SO720G 20 500 5 Round Power 2.5 6/2.5 X

2 Round Control

56SOXXXG Series

Ithe - Conventional Enclosed Thermal CurrentU

i- Insulation Voltage

Refer to page 43 for explanation ofsocket configurations.

INTERNATIONAL SURFACE SOCKET OUTLETSClipsal offers 3 series of industrialsockets to suit IEC309, BS EN 60309 &BS4343 Standards. Covering Interna-tional Protection Ratings IP44 & IP67 aswell as a unique Clipsal IP66 version,each range features a wide variety ofstandard products suited to variousindustries and applications. All othervariations are available on request. Forfurther details refer to the BS EN 60309- Clock Diagram or contact your nearestClipsal representative.

Each range boasts a• Plug Retaining Stop in Flap to Secure

the Connection.• Colour Coded Flap for Easy Voltage

Identification.Yellow 110/130V 50/60HzBlue 220/250V 50/60HzRed 380/415V 50/60Hz

Options• Less enclosure

Just add LE to Catalogue Numbere.g. 56SO316/4LE

• Colour.Just add the appropriate colour codeto the Catalogue Number e.g.56SO316/4,GY Grey = GY

56 Series - IEC309

CatalogueDescription

Socket

Number Configuration

56SO316/4 16A 4h 110/130V IP66 Round Pin Socket Outlet H

56SO332/4 32A 4h 110/130V IP66 Round Pin Socket Outlet I

56SO316/6 16A 6h 220/250V IP66 Round Pin Socket Outlet J

56SO332/6 32A 6h 220/250V IP66 Round Pin Socket Outlet M

56SO416/6 16A 6h 380/415V IP66 Round Pin Socket Outlet O

56SO432/6 32A 6h 380/415V IP66 Round Pin Socket Outlet O

56SO516/6 16A 6h 380/415V IP66 Round Pin Socket Outlet P

56SO532/6 32A 6h 380/415V IP66 Round Pin Socket Outlet P

Rated at IP66 this range offers atranslucent lid with an automaticlatching feature. This product isespecially suited for hose downsituations, like those encountered in thefood processing industries. The auto

closing lid guarantees the integrity of thesealing system after an operatorwithdraws the plug. This is especiallyuseful in harsh environments such asquarries and cement works.

56 Series to IEC309 - Rated IP66

16

56 Series to IEC309Rated IP44

Designed to IEC309 and BS4343 thisrange features an opaque lid with snap

down action. Great for ManufacturingEnvironments the range is able towithstand minor splashing and impacts.


Socket


56SO316/6/67 16A 6h 220/250V IP67 Round Pin Socket Outlet J

56SO332/6/67 32A 4h 220/250V IP67 Round Pin Socket Outlet K

56SO416/6/67 16A 6h 380/415V IP67 Round Pin Socket Outlet O

56SO432/3/67 32A 6h 380/415V IP67 Round Pin Socket Outlet N


56SO516/6/67 16A 6h 380/415V IP67 Round Pin Socket Outlet P


56 Series to IEC309Rated IP67

Designed to IEC309 and BS4343 thisrange features a lid with snap downaction and requires a 90O twist toactivate sealing mechanism. Completelydust proof and able to stand up toimmersion, this range is ideal for MarineEnvironments.

BS EN 60309 -CLOCK DIAGRAM

Earth contact position (h)For all the products except extra lowvoltage i.e. all colour codes exceptwhite and violet the position given is thatof the earth pin when the socket outlet/connector is viewed from the front withthe keyway at the bottom.

Important Note: When viewing aplug from the front, the position of theearth pin is reversed i.e. 4h (4 o'clock)appears as 8h (8 o'clock)

KeySupply from an isolatingtransformer

~ a.c.

d.c........


Socket


56SO316/6/44 16A 6h 220/250V IP44 Round Pin Socket Outlet J

56SO332/6/44 32A 4h 220/250V IP44 Round Pin Socket Outlet K





56 Series - IP44

56 Series - IP67

17

56SO313 56SO316RP

Clipsal's 56 Series Socket Outlets arealso available in various InternationalSocket Configurations. All feature Clipsal'sunique IP66 and auto latching mechanismwhen the plug is withdrawn. The clear lidfacilitates easy identification of the socketeliminating the need to open.

Options• Less enclosure.

Just add LE to Catalogue Numbere.g. 56SO316/4LE

• Colour.Just add the appropriate colour codeto the Catalogue Numbere.g. 56SO316/4, GY Grey = GY


Socket


56SO310/16 Italian 10 or 16amp with earth 250V Socket Outlet F

56SO310F16 French & Belgian IEC 60884.1 250V10 or 16amp Socket Outlet with Earth Pin G

56SO210/16 German "SHUKO" CEE 7/4 250V10 or 16amp Socket Outlet. E

56SO313 British BS1363 & MS589 250V13amp Shuttered Socket Outlet B

56SO315RP British BS546 250V15amp Round Pin Socket Outlet C

56SO316RP South African/Indian 230V/250V D16amp Round Pin Socket Outlet

56SO310C Chinese 240V 10amp Socket Outlet A

56SO310/16

56SO210/16

56SO310F16

56SO315RP56SO310C

International SocketConfiguration

SOCKET CONFIGURATIONLINE DRAWING

2 & 3 Pin

10A 240V

A

13A 250V

B

15A 250V

C

16A 250V

D

16A 250V

E

16A 250V

F

16A 250V

G

16A 110V

H

32A 110V

I

18

Options available • All appliance inlets are available

Less Enclosure - add LE toCatalogue Number e.g. 56AI420becomes 56AI420LE.

• 56AI310 and 56AI315 versionsavailable in Chemical ResistantOrange e.g. 56AI310 becomes56AI310RO.

APPLIANCE INLETS56 Series 3 Phase Appliance Inlets

feature a downward facing, angled pinhousing which enables extension socketplugs to be neatly connected withoutbulky right angle entry.

A screwed lock ring is standard onall models to secure extension socketsand appliance connectors, and ensureIP integrity.

All mouldings are impact resistantand UV stabilised.

Note: The IP rating is only achievedon 500V appliance inlets if the screw-oncap (56PC Series) provided is fittedwhen not in use.

All 56AI Series Appliance Inlets arecompatible with 56CSC ExtensionSockets and there is no need for specialreverse pin plugs.

Catalogue Ithe Ui Number Conductor Terminal IP Matching Socket O/A* Dims.Number (A) (V) of Pins size in mm2 Rating Extension Configuration (H) x (W) x (D)

Min. Max. Socket Socket

56AI310 10 250 3 Flat 1.5 6 66 56CSC310 A 107x101x3856AI315 15 250 3 Flat 2.5 6 66 56CSC315 B 107x101x3856AI320 20 250 3 Round 2.5 6 56 56CSC320 H 204x101x12656AI332 32 250 3 Round 6 16 56 56CSC332 I 204x101x12656AI410 10 500 4 Round 1.5 6 56 56CSC410 K 204x101x12656AI420 20 500 4 Round 2.5 6 56 56CSC420 L 204x101x12656AI432 32 500 4 Round 6 16 56 56CSC432 N 204x101x12656AI440 40 500 4 Round 10 16 56 56CSC440 O 204x101x12656AI450 50 500 4 Round 10 16 56 56CSC450 P 204x101x12656AI510 10 500 5 Round 1.5 6 56 56CSC510 Q 204x101x12656AI520 20 500 5 Round 2.5 6 56 56CSC520 R 204x101x12656AI532 32 500 5 Round 6 16 56 56CSC532 S 204x101x12656AI540 40 500 5 Round 10 16 56 56CSC540 T 204x101x12656AI550 50 500 5 Round 10 16 56 56CSC550 U 204x101x126

56AI310 56AI520

Uthe- Conventional Enclosed Thermal Current

Ui - Rated Insulation Voltage

Refer to page 43 for explanation of pinconfigurations.

* Refer rear of Catalogue for further details.

SOCKET CONFIGURATIONLINE DRAWING

2 & 3 Pin

16A 220/250V

J

32A 220/250V

K

16A 240V

L

SOCKET CONFIGURATION2 & 3 PinLine drawing

32A 240V

M

4 Pin

32A 380/415V

N

16/32A 380/415V

O

5 PinLine drawing

16/32A 380/415V

P

19

56 Series Surface Switches areavailable from 250V, 10A to 500V 63A. Theyincorporate a positive, rotary switch action.‘ON’ and ‘OFF’ positions are clearly markedand there is provision for two padlocks. Holediameter is 8mm.

If locking is required in the ‘ON’ position,simply drill a hole where necessary.

To provide easier wiring of our 56 SeriesThree Pole 63A Switch, a deeper two gangenclosure and centrally mounted option (Cat.No. 56SW363/2), allows additional room forwiring associated with this application.

Earth and neutral connectors accom-modating 3 x 6mm2 cables are supplied withall products above 20A.Options available

With Neon - add N to Catalogue No.e.g. 56SW320 becomes 56SW320N.Less Enclosure - add LE toCatalogue Number e.g. 56SW320becomes 56SW320LE.Resistant Orange - add RO toCatalogue Number e.g. 56SW320becomes 56SW320RO.Resistant White - add RW to Cata-logue Number e.g. 56SW320becomes 56SW320RW.Chemical Grey - add CG to Cata-logue Number e.g. 56SW320becomes 56SW320CG.

SURFACE SWITCHES

56SW120N

56SW320RO

Ithe - Conventional Enclosed Thermal Current

U I - Insulation VoltageUe - Operational Voltage

Catalogue No. of Ithe Ui / Ue Ie (A) Utilisation Category M Conductor Terminal IP O/A* Dims.Number Switched (A) (V) Rating size in mm2 Rating (H) x (W) X (D)

Poles AC21A AC22A AC23A Min. Max./cont.

56SW110 1 10 250 10 8 8 M80 1.5 6 66 107x101x8056SW110HD 1 10 250 10 10 10 M260 6 25 66 107x101x10456SW110/2~ 1 10 250 10 8 8 M80 1.5 6 66 107x101x8056SW115 1 15 250 15 8 8 M80 1.5 6 66 107x101x8056SW115HD 1 15 250 15 15 15 M260 6 25 66 107x101x10456SW115/2~ 1 15 250 15 8 8 M80 1.5 6 66 107x101x8056SW110/I~ 1 10 250 10 8 8 M80 1.5 6 66 107x101x8056SW120 1 20 250 20 20 20 M260 2.5 25 66 107x101x10456SW132 1 32 250 32 32 20 M260 4 25 66 107x101x10456SW150 1 50 250 50 50 25 M250 10 25 66 107x101x10456SW163 1 63 250 63 63 25 M250 16 25 66 107x101x10456SW220 2 20 500 20 20 20 M220 2.5 25 66 107x101x10456SW232 2 32 500 32 32 20 M220 4 25 66 107x101x10456SW250 2 50 500 50 50 25 M220 10 25 66 107x101x10456SW263 2 63 500 63 63 25 M220 16 25 66 107x101x10456SW310 3 10 500 10 10 10 M100 1.5 25 66 107x101x10456SW320 3 20 500 20 20 20 M100 2.5 25 66 107x101x10456SW332 3 32 500 32 32 20 M100 4 25 66 107x101x10456SW350 3 50 500 50 50 25 M200 10 25 66 107x101x10456SW363 3 63 500 63 63 25 M200 16 25 66 107x101x10456SW363/2 3 63 500 63 63 25 M200 16 25 66 204x101x10456SW320C 16 25/2.5 66 107x101x10456SW332C 16 25/2.5 66 107x101x10456SW350C 16 25/2.5 66 107x101x10456SW420 4 20 440 20 20 20 - 2.5 6 66 107x101x104

Ie -Operational CurrentNote: AC utilisation categories to AS3947.3.* Refer rear of Catalogue for further details.

~ 56SW110/2 and 56SW115/2 -2 Way switch mechanisms~ 56SW110/I -Intermediate switch mechanism

•

•

•

•

•

AS 56SW320 + 2A CHANGEOVER AUX. LATE MAKE EARLY BREAK



For Fluorescent Loads use 56SW110HD OR 56SW115HD instead of 56SW110 or 56SW115.

20

Safety Surface Switches

Clipsal's new safety range of iso-lating switches ensures isolators arehighly visible by using a brightly colouredred switch knob and yellow plate.

The high visibility naturally reducesan individual's response time in the eventof an emergency.

Simply add RY to Catalogue Number.e.g. 56SW120 becomes 56SW120RY.

Available in the followingCatalogue Numbers:56SW12056SW13256SW32056SW33256SW35056SW363

Refer to previous page for technicalinformation.

56SW120N

250V Single and Twin2 Way Switches withsliding switch dollies

Options availableLess enclosure - add LE toCatalogue Number e.g. 56SSW10becomes 56SSW10LE.Resistant Orange - add RO toCatalogue Number e.g. 56SSW10becomes 56SSW10RO.

•

•

56SSW10

Catalogue Description Number of Ithe Ui/Ue M Conductor Terminal IP O/A* Dims.

Number Switches (A) (V) Rating size in mm2 Rating (H) x (W) x (D)per Module Min. Max.

56SSW10 Single sliding switch 1 10 250 M80 1.5 6 56 107x101x6856SSW15 Single sliding switch 1 15 250 M80 1.5 6 56 107x101x6856SSW10/I Intermediate sliding switch 1 10 250 M100 1.5 6 56 107x101x6856SSW2/10 Double sliding switch 2 10 250 M80 1.5 6 56 107x101x6856SSW2/15 Double sliding switch 2 15 250 M80 1.5 6 56 107x101x68

56 Series Single and Twin SlidingSwitches are available in 10 and 15Aratings. A single intermediate switch isalso available.


U I - Insulated VoltageUe - Operational Voltage

Note: AC utilisation categories to AS3947.3.* Refer rear of Catalogue for further details.

21

Options availableResistant Orange -

add RO to CatalogueNumber eg. 56SWH325becomes 56SWH325RO

Auxiliary contact -add C for 1 N/C 10Acontact to CatalogueNumber e.g. 56SWH325becomes 56SWH325C.Add CO for 1 N/C and1 N/O 10A contact toCatalogue Number e.g.56SWH325 becomes56SWH325CO.

•

•


UI - Insulation VoltageIe

- Operational Current

Note: AC utilisation categories to AS3947.3.Refer to rear of catalogue for further details.

56SWH325

Note:Switch can be fixedonto a mounting plateas a special.

Clipsal Heavy-Duty SurfaceSwitches come with integral 3 or 4 poleconfigurations, from 25 to 80A ratings.The switch actuator comes standard insafety red/yellow and has 3 padlockingfacilities. Hole diameter is 8mm.

The switch is mounted separate tocover in a DIN mounting drop-in cradlewhich allows quick removal andinstallation.

The extra deep enclosure allowsample wiring space for easy installationand the switch is suited to motor rating.

Heavy-Duty SurfaceSwitches

CHANGEOVER ANDREVERSING SWITCHESDesigned to give full motor control in

a unit that is rated IP66. Clipsal’sChangeover and Reversing Switchesare housed within single modules aspart of the overall modular concept ofthe range.

Earth and neutral connectorsaccommodating 3 x 6mm2 cables are

provided with all models.

Option availableResistant Orange - add RO toCatalogue Number e.g.56SW220CO becomes56SW220CORO.

Clipsal 7 Series Cam Type SwitchMechanisms are used and thereforespecial configurations are available.Contact your Clipsal representative formore information.

•

Catalogue No. of Ithe Ui / UeIe (A) Utilisation Category AC15 Conductor Terminal IP O/A* Dims.

Number Switched (A) (V) AC21A AC22A AC23A 240V/415V size in mm2 Rating (H) x (W) x (D)Poles 690V 690V Min. Max.

56SW220CO 2 20 660 20 - 15 8/6 1.5 2 x 4 66 107x101x116Changeover Switch56SW420CO 4 20 660 20 - 15 8/6 1.5 2 x 4 66 107x101x116Changeover Switch56SW320R 3 20 660 20 - 15 8/6 1.5 2 x 4 66 107x101x116Reversing Switch

Note: AC utilisation categories to AS3947.3.Ithe - Conventional Enclosed Thermal CurrentU I - Insulation Voltage

Ue - Operational VoltageIe - Operational Current* Refer rear of Catalogue for further details.

Note - Additional auxiliary contacts areavailable. Contact your Clipsalrepresentative for details.

Catalogue Number of Ithe Ui Ie (A) Utilisation Category Conductor Terminal IP O/A* Dims.

Number Switched (A) (V) size in mm2 Rating (H) x (W) x (D)Poles AC21A AC22A AC23A Min. Max./cont.

56SWH325 3 25 690 25 25 25 1.5 16 56 204x101x17256SWH340 3 40 690 40 40 25 1.5 16 56 204x101x17256SWH363 3 63 690 63 63 63 1.5 35 56 204x101x17256SWH380 3 80 690 80 80 63 1.5 35 56 204x101x17256SWH425 4 25 690 25 25 25 1.5 25 56 204x101x17256SWH440 4 40 690 40 40 25 1.5 25 56 204x101x17256SWH463 4 63 690 63 63 40 1.5 25 56 204x101x172

56SW220C0

22

Options availableLess Enclosure - add LE toCatalogue Number e.g. 56PBbecomes 56PBLE.

PUSH-BUTTON CONTROLSTATIONSThis rugged range consists of five

different combinations of stop startcontrol stations.

The stations are ideal in wet, dusty ordirty conditions for controlling motorstarters on pumps, saws, compressors,lathes, processors and processing lines.56PB - Start control station.56PBS - Stop control station.56PBS1 - Emergency stop station. Thisstation has a mushroom head with twistreset and red push-button.56PBS2 - Stop station. This station hasa mushroom head with twist reset andred push-button (labelled stop only).56/2PB - Combination stop/start controlstation with momentary operation push-buttons. The red stop button has anextended head and the green start buttona flush head.56/2PBS1 - Combination stop/startcontrol station with same stop button asthe 56PBS1.

56PBS

56/2PB

56PBS1

56PB

56PBS2

56/2PBS1

Catalogue Ithe Ui / Ue Ie(A) Utilisation Category Button Conductor Terminal IP O/A* Dims.Number (A) (V) AC15 DC13 Colour size in mm2 Rating (H) x (W) x (D)

240V 24V Min. Max.

56PB 10 250 6 8 Green 1 4 66 107x101x8056PBS 10 250 6 8 Red 1 4 66 107x101x8656PBS1 10 250 6 8 Red 1 4 66 107x101x8856PBS2 10 250 6 8 Red 1 4 66 107x101x8856/2PB 10 250 6 8 Red/Green 1 4 66 107x101x8656/2PBS1 10 250 6 8 Red/Green 1 4 66 107x101x88

Ue - Operational VoltageIe - Operational Current* Refer rear of Catalogue for further details.

Note: AC utilisation categories to AS3947.5.Ithe - Conventional Enclosed Thermal

CurrentU I - Insulated Voltage

•Resistant Orange - addRO to Catalogue Number e.g.56PBS1 becomes 56PBS1RO.Resistant White - addRW to Catalogue Number e.g.56PBS1 becomes 56PBS1RW.

•

•

23

KEY OPERATED SWITCHES only for peace of mind in high securityapplications. Locks are selected fromthe top of the range EFFCO-KABAQUATTRO lock barrels. These locksare available from over 300 locksmithsthroughout Australia. Locks are lockablein the ‘off’ position only and the key itselfis rotated in order to operate the keymechanism. The switch cover hassmooth edges to resist forced actuation.

Options availableCommon keys for a number ofswitches are available to specialorder.Resistant Orange - add RO toCatalogue Numbere.g. 56K1SW120 becomes56K1SW120RO.

•

•

56 Series Key Operated Switchesare designed for all key switch applica-tions with the choice of three versions.

Earth and neutral connectorsaccommodating 3 x 6mm2 are suppliedwith all models.Standard Security - for generalapplications. From single phase 20A tothree phase 50A. These switches aresupplied with individual keys.Medium Security - for mediumsecurity applications. These switchesare fitted with high quality Lowe andFletcher locks. The key itself is rotatedin order to operate the switch mecha-nism. These switches are supplied withindividual keys. The switch cover hassmooth edges to resist forced actuation.High Security - available in kit form

56K2SW320

56KISW115HS

561KSW310MS

24

Catalogue No. of I the Ui / Ue Ie (A) Utilisation Category M Cond. Term. size in mm2 IP O/A* Dims.

Number switched poles (A) (V) AC21A AC22A AC23A Rating Min. Max. Rating (H) x (W) x (D)

STANDARD SECURITY SWITCHES

For locking in only the ‘off’ position

56K1SW115 1 15 250 15 10 8 M80 1.5 6 66 107x101x8556K1SW120 1 20 250 20 20 20 M250 2.5 25 66 107x101x10456K1SW132 1 32 250 32 32 25 M250 4 25 66 107x101x10456K1SW150 1 50 250 50 50 25 M250 10 25 66 107x101x10456K1SW220 2 20 500 20 20 20 M220 2.5 25 66 107x101x10456K1SW232 2 32 500 32 32 25 M220 4 25 66 107x101x10456K1SW250 2 50 500 50 50 25 M220 10 25 66 107x101x10456K1SW310 3 10 500 10 10 10 M200 1.5 25 66 107x101x10456K1SW320 3 20 500 20 20 20 M200 2.5 25 66 107x101x10456K1SW332 3 32 500 32 32 25 M200 4 25 66 107x101x10456K1SW350 3 50 500 50 50 25 M200 10 25 66 107x101x104

For locking in both ‘on’ & ‘off’ positions

56K2SW115 1 15 250 15 10 8 M80 1.5 6 66 107x101x8556K2SW120 1 20 250 20 20 20 M250 2.5 25 66 107x101x10456K2SW132 1 32 250 32 32 25 M250 4 25 66 107x101x10456K2SW150 1 50 250 50 50 25 M250 10 25 66 107x101x10456K2SW220 2 20 500 20 20 20 M220 2.5 25 66 107x101x10456K2SW232 2 32 500 32 32 25 M220 4 25 66 107x101x10456K2SW250 2 50 500 50 50 25 M220 10 25 66 107x101x10456K2SW310 3 10 500 10 10 10 M200 1.5 25 66 107x101x10456K2SW320 3 20 500 20 20 20 M200 2.5 25 66 107x101x10456K2SW332 3 32 500 32 32 25 M200 4 25 66 107x101x10456K2SW350 3 50 500 50 50 25 M200 10 25 66 107x101x104

MEDIUM SECURITY SWITCHES

For locking in only the 'off' position

56K1SW115MS 1 15 250 15 10 8 M80 1.5 6 66 107x101x8556K1SW132MS 1 32 250 32 32 20 M250 4 25 66 107x101x10456K1SW310MS 1 10 500 10 10 10 M200 1.5 25 66 107x101x104

For Locking in the 'on' & 'off' Positions

56K2SW115MS 1 15 250 15 10 8 M80 1.5 6 66 107x101x8556K2SW132MS 1 32 250 32 32 20 M250 4 25 66 107x101x10456K2SW310MS 1 10 500 10 10 10 M200 1.5 25 66 107x101x104

HIGH SECURITY SWITCHES

For Locking in the 'off' Position

56K1SW115HS 1 15 250 15 10 8 M80 1.5 6 66 107x101x8556K1SW132HS 1 32 250 32 32 20 M250 4 25 66 107x101x10456K1SW310HS 1 10 500 10 10 10 M200 1.5 25 66 107x101x104

Note: AC utilisation categories toAS3947.3* Refer rear of Catalogue for further details.

Ithe - Conventional Enclosed ThermalCurrentUi - Insulation VoltageUe - Operational VoltageIe - Operational Current

25

TIMER SWITCHES56TC Timer Switches

56 Series TC Synchronised Timersallow time control in IP56 environments.They are available in 24 hour and 7 dayconfigurations with minimum switchingtimes as indicated.

All timers are supplied with slidingtabs for easy setting and are fitted withmanual override switches.

Earth and neutral connectorsaccommodating 3 x 6mm2 cables aresupplied.

Two quartz models are availablewith a 150 hour battery backup.

Note: The 56TC Timer range is notsuitable for fluorescent loads.

Options availableAdd ‘LE’ to Catalogue Numbersfor models Less Enclosure. LEmodels are suitable for mountingin 56ES1 shallow type enclosures.

•

**Nicad rechargeable battery requires 70 hours for full charge.* Refer rear of Catalogue for further details.

Note: AC utilisation categories to AS3947.3.Ithe - Conventional Enclosed Thermal

CurrentU

I- Insulated Voltage

NEW TIMER SWITCHESOther features are as follows:Holiday Programming

Before going away, a simple holidayprogram can be set for a period of up to99 days.

This program will have priority overthe normal program and can eitheroperate as set or continually without apreset limit. Program start can beimmediate or delayed by up to 6 days.

7 Day Fully Programmable42 Memory Locations

This facility enables up to 21 on/offswitching commands to be given at anytime during a 7 day period.i.e. Memory No. 1 (ON) Mon,

8.00a.m.Memory No. 2 (OFF) Mon,8.25a.m.Memory No. 3 (ON) Mon, Tue,Wed, 9.00p.m.Memory No. 4 (OFF) Mon, Tue,Wed, 9.40p.m.

56TCDB Digital TimerSwitches

When a timer with pin point precisionis required in an IP66 environment, the56TCDB Digital Timer is the answer.

The digital timer features highlyaccurate timing and multi-functioncontrol with fully programmable push-button facilities.


The 56TCDB also incorporates a150 hour battery running reserve thatretains information in the event of a lossof mains power.

Note: The 56TCDB Timer is notsuitable to switch fluorescent loads.The Timer has a stored charge andtherefore should not be connected toportable equipment.

56TCDB

Settings can continue through to amaximum of 42 locations.Daylight Saving Switch

Enables summer/winter timechanges at the press of a button.150 Hour Battery RunningReserve

Retains program and setting duringpower blackout.Inbuilt Bypass Switch

This function disengages timingwhen not required. The Inbuilt BypassSwitch can be set at permanently 'on' orpermanently 'off' or 'on' untilprogrammed 'off' or 'off' until pro-grammed 'on'.

Note: 56TCB and 56TCB7 Timershave a stored charge andtherefore should not beconnected to portable equipment.

56TCB7

Ue - Operational Voltage

Ie - Operational Current

Switching change over contact

26

A single gang module, the unit isdouble pole 250V 16A a.c. and is suppliedas standard with a power on neon.

The 16A mechanism has pressureplate type terminals. The 56SWT216is ideally suited to run pumping or filteringoperations or for use with hot waterservice boosters. Also suitable forfluorescent loads.

** Nicad rechargeable battery takes 70hours to fully charge.

* Refer rear of Catalogue for furtherdetails.


U I - Insulated VoltageUe - Operational VoltageIe - Operational Current

Catalogue Switching Ithe Ui / Ue Ie (A) Utilisation Category M Battery Running Minimum Conductor Term. IP O/A* Dims.

Number (A) (V) Rating Reserve Switch Time size in mm2 Rating (H) x (W) x (D)

AC21A AC22A AC23A (Hrs) Min. Max.

56TCDB 1 C/O 10A 250 10 10 8 100 **150 hours 1min 2.5 6 66 107x101x100

56SWT216 Two HourProcess Timer

Clipsal’s 56 Series Two HourProcess Timer is a surface mountingmodel that features a mechanical timeroperated by a rotary switch.

The timer is fully variable with therange of zero to two hours in ten minuteincrements which can be reset oroverridden at any stage.

Catalogue Switching Ithe Ui / Ue Ie (A) Utilisation Category M Switching Conductor Term. IP O/A* Dims.Number (A) (V) Rating Time size in mm2 Rating (H) x (W) X (D)

AC21A AC22A AC23A Min. Max.

56SWT216 2 Pole 16 250 16 10 10 120 10 mins. 2.5 4 56 107x101x100Minimum120 mins.Maximum

Note: AC utilisation categories to AS 3947.3.

* Refer to rear of catalogue for further details.Ithe - Conventional Enclosed Thermal CurrentU I - Insulated VoltageUe - Operational VoltageIe - Operational Current

•


Option availableLess enclosure - add LE to

Catalogue Number e.g. 56SWT216becomes 56SWT216LE.

56SWT216

27

Sunset switches automaticallyswitch lights on when the ambient lightlevel falls below a predetermined level.

The 56SSR is surface mounting butcan be adapted to flush mounting byusing 56FA Surrounds and Brackets.

The 56SSR allows control of a 10Aload current in a two wire configuration,therefore, eliminating the need forseparate neutral at the switch. The56SSR also incorporates a fullyconfigurable timer with a remote-disableoption.

When correctly connected to asuitable supply and load, the 56SSR willturn the load on when the ambient lightlevel is below approximately 10 lux.Similarly, the load will be turned off whenthe light level exceeds approximately 30lux. Delays of approximately 8 secondson turn-off and 30 seconds on turn-on

56SSR

are incorporated into the circuit to rejectthe effects of short term changes in thelight levels, which may otherwise turnthe load on or off.

The 56SSR is also equipped with atimer circuit which, if enabled, will turnthe light off after a preset time delay. Thetime delay can be from 15 minutes to 15hours - 45 minutes set in 15 minuteincrements.

The timer can be disabled byapplying neutral potential to the terminalT1 in which case the status of the loadis controlled only by the ambient lightlevel. This feature provides a remotetimer override function if required.

Since the 56SSR Sunset Switch is atwo wire product which does not requireany power while the load is turned on,there is one specific aspect of itsoperation well worth noting. When poweris applied to the sunset switch for thefirst time, it will require up to 3.5 minutesto warm up. This behaviour is caused bythe time delay required to charge anenergy storage element within the unit.

Ithe - Conventional Enclosed Thermal CurrentUI - Insulated VoltageUe - Operational VoltageIe - Operational Current

* Refer rear of Catalogue for further details.Note: Utilisation categories to AS3947.3

Note: Max. off state leakage current -8.2 mA 240V a.c. Time accuracy - +/-15%.

SUNSET SWITCHES PREMIUM

Utilisation CategoryCatalogue Ithe Ui / Ue

Ic (A) M Temp. Time Conductor Term. IP O/A* Dims. Operating

Number (A) (V) Rating Range Adjust size in mm2 Rating (H) x (W) x (D) Voltage

AC21 AC22 AC23 Min. Max.

56SSR 10A 250 10 10 8 M80 0o to 15 Min. to 1.0 2x4.0 66 101 190-(Min. +40oC 945 Min. 107 265V

40mA) 66 50Hz a.c.

28

CONDENSATION DRAINCatalogue Number 56D

Where condensation build up is aproblem we offer the 56D.

The 56D is made from chemicallyresistant nylon and comes completewith a lock nut.

Note: Installation of the 56D willderate the product to IP54.

MOUNTING FEET AND POLEMOUNTING BRACKETS

Catalogue Number 56MFMounting feet and stainless steel

mounting screws (1¼" x 10 gauge) areprovided to space 56 Series accesso-ries off walls used in food industries.

The 56MF is designed to be used in

conjunction with food industry 280MCMounting Channels and 280 Series25mm Conduit Clips.

Catalogue No. 56PMKA heavy-duty stainless steel pole

mounting kit made of 316 Gradestainless steel. Comes complete with4¾" and 1¼" size stainless steelmounting screws.

56MF

PADLOCKING CLIPCatalogue Number 56LK

Padlocking Clip to enable the flap tobe locked closed.

Suits 1/4" Padlock Shank.

56LK

��

SUNSET SWITCHES ECONOMYA switch that turns lights on at dusk

and off at dawn by itself, how basic isthat? For consistent lighting without liftinga finger, choose the Clipsal Photo ElectricSwitch. A 'smart' switch that operatesaccording to the level of sunlight, makingit a simple to use, reliable and economicalway to save time and energy.

• No capacitor or time programming

necessary.

• IP66 Rated for extreme environments.

• Factory set dusk to dawn saves set

up time.

• 10A Fluorescent and resistive loads.

• 3 - wire device eliminates the need for

capacitor on small inductive loads.

56PEDD3

56PEDD3

Nominal Supply Voltage 220-240 Vac 50 HzRated Load 10AMin. Load 0mACompatible Loads Incandescent and FluorescentSupply Current 15mAPower Consumption 1WOperating Temperature 0OC - 45OCTurn ON Light Level Approx 10 LuxTurn OFF Light Level Approx 50 Lux

SPECIFICATIONS

29

Catalogue Suits gland Description

Number nut thread

56T20 23mm Suitable for 10-20 amp. 500V plugs. Fits 20mm flexible hose.56T25 37mm Suitable for 32-50 amp. 500V plugs. Fits 25mm flexible hose.56T32 37mm Suitable for 32-50 amp. 500V plugs. Fits 32mm flexible hose.

ANGLE & STRAIGHT PLUGSClipsal has a comprehensive range

of straight and angle plugs.All are fitted with a screwed ring for

securing to socket outlets and to ensureIP66 rating.

Design innovations include a trans-parent centre body section for instantvisual checking of connections and aninternal cable clamp which grips twoways to prevent cable twisting.

Angled versions ensure a neat cablerun when connected to socket outlet.

Options availableWhen plugs are not in use IP66rating is maintained by fitting a56PC Plug Cap.Resistant Orange - add RO toCatalogue Number e.g. 56P410becomes 56P410RO.

* Note: Refer 56T Series for terminatorsto connect hose to non standard threadsize.

NSW Coalfield Certificate of ExaminationUi - Insulation VoltageIth - Conventional Free Air Thermal Current

*Refer to rear of catalogue for further details.

Refer to page 45 for explanation ofpin configurations.

Catalogue Catalogue Ith Ui Number Conductor Term. Cable Nominal IP Pin Gland NutNumber Number (A) (V) of size in mm2 Diameter Rating Config. Thread*Straight Angle Pins

Min. Max/cont. Min. Max. Straight Angled

56P210 - 10 250 2 Parallel Flat 1.0 2.5 7 12.5 66 D 20mm56P215/32 - 15 32 2 Polarised 1.5 2.5 7 12.5 66 E 20mm56P3/110 - 10 110 2 Round & Flat Earth 1.0 2.5 7 12.5 66 J 20mm56P310RP - 10 250 3 Round 1.0 4 7 12.5 66 G 20mm56P310 - 10 250 3 Flat 1.0 2.5 7 12.5 66 A 20mm56P310L - 10 250 2 Flat & Round Earth 1.0 2.5 7 12.5 66 C 20mm56P320F - 20 250 3 Flat 2.5 2.5 7 12.5 66 F 20mm56P315 - 15 250 3 Flat 1.5 2.5 7 12.5 66 B 20mm56P320 56PA320 20 250 3 Round 2.5 4 6 15.7 66 H 25mm 23mm- 56PA332 32 250 3 Round 2.5 16 9.5 28 66 I 37mm56P410 56PA410 10 500 4 Round 2.5 4 6 15.7 66 K 25mm 23mm56P416K 56PA416K 16 500 4 Round 2.5 4 6 15.7 66 M 23mm 23mm

(unique key configuration)56P420 56PA420 20 500 4 Round 2.5 4 6 15.7 66 L 25mm 23mm56P432 56PA432 32 500 4 Round 2.5 16 9 28 66 N 37mm 37mm56P440 56PA440 40 500 4 Round 2.5 16 9 28 66 O 37mm 37mm56P450 56PA450 50 500 4 Round 2.5 25 9 28 66 P 37mm 37mm56P510 56PA510 10 500 5 Round 2.5 4 6 15.7 66 Q 25mm 23mm56P520 56PA520 20 500 5 Round 2.5 4 6 15.7 66 R 25mm 23mm56P532 56PA532 32 500 5 Round 2.5 16 9 28 66 S 37mm 37mm56P540 56PA540 40 500 5 Round 2.5 16 9 28 66 T 37mm 37mm56P550 56PA550 50 500 5 Round 2.5 25 9 28 66 U 37mm 37mm56P610 56PA610 10 500 6 Round 2.5 4/2.5 6 15.7 66 V 23mm 23mm56P710 56PA710 10 500 7 Round 2.5 4/2.5 6 15.7 66 W 23mm 23mm56P720 56PA720 20 500 7 Round 2.5 4/2.5 6 15.7 66 X 23mm 23mm

•

•

56P Series Plugs

30

Plug CapsWhen not in use, Clipsal 56P and

56PA Series Plugs can be additionallyprotected by utilising our 56PC SeriesPlug Caps.

When in position, they protect thepins from damage, dirt, grease andwater ingress.

The caps are simple to fit and fullyenclose the plug face.

Socket CapsLikewise, to plug caps, Clipsal single

phase CSC Extension Sockets/Appliance Connectors can be addition-ally protected by utilising our 56SC2Socket Cap.

56PC 56PCI 56PC2

Catalogue Phase Suits Overall Dimensions

Number

56PC 3 10A - 20A 69.5mm TPI whitworth 45mm deep

56PCI 3 32A - 50A 69.5mm TPI whitworth 45mm deep56PC2 1 10A - 20A 59.2mm TPI whitworth 65mm deep56SC2 1 10A - 15A 59.2mm TPI whitworth 65mm deep

Internal Pin HousingsA full range of replacement pin

housings is available for the three phasestraight and angle plugs.

They eliminate the expense ofreplacing an entire unit if only the pinhousing is damaged. Pin housings aremoulded in durable polyester.

Catalogue Ith Ui No. of Conductor Term. size in mm2

Number (A) (V) Round Pins Min. Max./Control

56P410G 10 500 4 2.5 456P420G 20 500 4 2.5 456P510G 10 500 5 2.5 456P520G 20 500 5 2.5 456PA410G 10 500 4 2.5 456PA416KG 16 500 4 2.5 456PA420G 20 500 4 2.5 456PA432G 32 500 4 2.5 1656PA440G 40 500 4 2.5 2556PA450G 50 500 4 2.5 456PA510G 10 500 5 2.5 456PA520G 20 500 5 2.5 1656PA532G 32 500 5 2.5 1656PA540G 40 500 5 2.5 1656PA550G 50 500 5 2.5 2556PA610G 10 500 6 2.5 4/2.556PA710G 10 500 7 2.5 4/2.556PA720G 20 500 7 2.5 4/2.5

Ui - Insulation VoltageIth - Conventional Free Air Current

56PAXXXG Series

31

INTERNATIONAL ANGLEAND STRAIGHT PLUGS

To compliment its range ofInternational Socket Configurations,Clipsal has a range of straight andangled plugs available to suit.

Options availableGrey - GYElectric Orange - EOResistant Orange - RO

Just add the appropriate colour codeto the catalogue number e.g.56P313,GY


Plug


56P313 BS1363 & MS589 IP66 250V 13A Flat Pin Plug Top A

56P315RP BS546 IP66 250V 15A Round Pin Plug Top B

56P316RP SABS164 IP66 250V 16A Round Pin Plug Top C

56P310F16 Multi purpose IEC60884.1 250V 10 & 16A plug

to suit German,French or Italian sockets. D

56 Series - Straight Plugs


Plug


56PA313 BS1363 & MS589 IP66 250V 13A Flat Pin Plug Top A

56PA315RP BS546 IP66 250V 15A Round Pin Plug Top B

56PA316RP SABS164 IP66 250V 16A Round Pin Plug Top C

56PA310F16 Multi purpose IEC60884.1 250V 10 & 16A plug

to suit German, French or Italian. D

56 Series - Angled Plugs

PLUG CONFIGURATIONLINE DRAWING

2 & 3 Pin

13A 250V

A

15A 250V

B

16A 250V

C

16A 250V

D

32

EXTENSION SOCKETS &APPLIANCE CONNECTORSClipsal’s Three Phase Extension

Socket/Appliance Connector is animportant design breakthrough.

Now there is a common unit for bothcord extension socket and applianceconnector applications.

All connectors have impact resist-ant, UV stabilised mouldings.

The IP66 rating can be achievedwhen extension socket/connectors areused in conjunction with compatibleaccessories such as 56P Plugs, 56PAPlugs and 56AI Appliance Inlets.

IP66 rated units feature a hose proofcap which maintains the Interna-

56CSC41056CSC532

tional Protection rating when theaccessory is not being used.

Note: Cap not provided as standard withsingle phase extension sockets.Refer 56T Series for terminators toconnect hose to non standard gland nutthread.

Options available56SC2 Socket Cap to suit singlephase extension sockets.56CSC310 and 56CSC315available in Resistant Orange -add RO to Catalogue Number e.g.56CSC310 becomes56CSC310RO.

•

•

Catalogue Ith UI No. of Conductor Term. Cable Nominal IP Matching Matching Socket GlandNumber (A) (V) Sockets size in mm2 Diameter in mm Rating Plug Plug Config. Nut

Min. Max. Min. Max. Straight Angle Thread

56CSC310 10 250 3 Flat 1.0 6 6 12.5 66 56P310 56PA310 A 20mm56CSC315 15 250 3 Flat 1.0 6 6 12.5 66 56P315 56PA315 B 20mm56CSC320 20 250 3 Round 1.0 6 6 15.7 66 56P320 56PA320 H 23mm56CSC332 32 250 3 Round 2.5 16 9 28 66 56PA332 I 37mm56CSC410 10 500 4 Round 1.0 6 6 15.7 66 56P410 56PA410 K 23mm56CSC420 20 500 4 Round 1.0 6 6 15.7 66 56P420 56PA420 L 23mm56CSC432 32 500 4 Round 2.5 16 9 28 66 56P432 56PA432 N 37mm56CSC440 40 500 4 Round 2.5 16 9 28 66 56P440 56PA440 O 37mm56CSC450 50 500 4 Round 2.5 16 9 28 66 56P450 56PA450 P 37mm56CSC510 10 500 5 Round 1.0 6 6 15.7 66 56P510 56PA510 Q 23mm56CSC520 20 500 5 Round 1.0 6 6 15.7 66 56P520 56PA520 R 23mm56CSC532 32 500 5 Round 2.5 16 9 28 66 56P532 56PA532 S 37mm56CSC540 40 500 5 Round 2.5 16 9 28 66 56P540 56PA540 T 37mm56CSC550 50 500 5 Round 2.5 16 9 28 66 56P550 56PA550 U 37mm

Ui - Insulation VoltageIth - Conventional Free Air Current

Refer to page 45 for explanation of socketconfigurations.

PENDANTCONVERSION KITSClipsal 56POK and 56POKI Pendant

Outlet Kits enable the three phase56CSC Series Industrial Connectors tobe easily converted to pendant outlets.

There are two models available forconnectors 10A - 20A and 32A - 50A,both of which are manufactured fromquality stainless steel to last andwithstand loads of up to 50kg.

The 56SPOK allows easy conver-sion of the 56C and 56CV Series topendant outlets.

Catalogue Number Suits

56POK 10A - 20A56POKI 32A - 50A56SPOK Switched pendant outlet kit

56SPOK

56POK 56POKI

*Refer to rear of catalogue for furtherdetails.

33

PENDANT OUTLETSClipsal 56PO Three Phase Pendant

Outlets are a hanging version of our56CSC Connectors.

All have impact resistant UV stabil-ised mouldings.

56PO532

Catalogue Ith Ui No. of Conductor Term. Cable Nominal IP Matching Matching Socket GlandNumber (A) (V) Sockets size in mm2 Diameter in mm Rating Plug Plug Config. Nut

Min. Max. Min. Max. Straight Angle Thread

56PO410 10 500 4 Round 1.0 6 6 15.7 66 56P410 56PA410 K 23mm56PO420 20 500 4 Round 1.0 6 6 15.7 66 56P420 56PA420 L 23mm56PO432 32 500 4 Round 2.5 16 9 28 66 56P432 56PA432 N 37mm56PO440 40 500 4 Round 2.5 16 9 28 66 56P440 56PA440 O 37mm56PO450 50 500 4 Round 2.5 16 9 28 66 56P450 56PA450 P 37mm56PO510 10 500 5 Round 1.0 6 6 15.7 66 56P510 56PA510 Q 37mm56PO520 20 500 5 Round 1.0 6 6 15.7 66 56P520 56PA520 R 37mm56PO532 32 500 5 Round 2.5 16 9 28 66 56P532 56PA532 S 37mm56PO540 40 500 5 Round 2.5 16 9 28 66 56P540 56PA540 T 37mm56PO550 50 500 5 Round 2.5 16 9 28 66 56P550 56PA550 U 37mm

Ui - Insulation VoltageIth - Conventional Free Air Thermal Current

Extensive field research hasresulted in the development of Clipsal'sexclusive High Pressure Gasket range.

Ideally suited to 56 Series productsthese gaskets are designed to with-

56HPG1

56 SERIES HIGHPRESSURE GASKETS

stand harsh situations like extremecleaning environments. For instance,they are excellent in industrial foodpreparation areas that are regurlarlyexposed to strong cleaning chemicals,

high water temperatures and equallyhigh water pressure. The gasket is UVstabilised and chemical resistant.Therefore it can be used on all chemicalresistant ranges.

Catalogue Number Suits

56HPG1 1 Gang High Pressure Gasket56HPG2/1 2 Gang High Pressure Gasket, suits 56CV Series56HPG2/2 2 Gang High Pressure Gasket, suits 56C Series

56HPG2/2

56HPG2/1

34

Catalogue No. of I the Ui/Ue. Ie


56SC310RC 1 10 25056SC315RC 1 15 25056SC410RC 3 10 50056SC420RC 3 20 50056SC432RC 3 32 50056SC440RC 3 40 50056SC510RC 3 10 50056SC520RC 3 20 50056SC532RC 3 32 50056SC540RC 3 40 500

Combination SwitchedSockets with RCDProtection

Despite Australia having one of thesafest electrical systems in the world,accidents can still occur.

A faulty or poorly maintainedappliance, a frayed cord, wet hands orcarelessness with power tools are allsituations that can lead to tragedy.

To help avoid electrocution inindustrial environments, Clipsal has arange of combination switched socketswith inbuilt RCD protection. The RCDworks by constantly monitoring andcomparing the current flow in both theActive and Neutral circuits of anelectrical installation.

Toroid Mechanism

SPECIAL COMBINATIONS ANDMODULES

During normal operation, theseActive and Neutral currents are inbalance.

However, should any current flow toearth, an imbalance is created in thesecircuits.

If this imbalance is sufficient (30mA),the RCD will cut the electrical supply inless than 40 milliseconds, perhaps themost important fraction of a second insomeone’s life.

Apart from the protection fromelectrocution that an RCD offers, it willalso cut off power to expensive electri-cal equipment in the event of anelectrical fault to earth. This protectsappliances against costly damage andthe installation against fire resulting fromfaults of this nature.

Clipsal Combination SwitchedSockets with RCD protection enablequick disconnection of power in thecase of an emergency and providemotor rated isolation. A neon is standardon all models to indicate that the RCD isprotecting the outlet. If the neon is not

Ui

- Insulated VoltageUe - Operational VoltageIe - Operational CurrentIthe - Conventional Enclosed Thermal

Current

Note: AC utilisation categories to AS3947.3


illuminated, the RCD has tripped and nopower is available from the socket.

The internal phase connectionsbetween switches and sockets arefactory wired.

The 56RC provides stand aloneprotection or multiple protection ofsocket outlets in a modular IP56 Seriesenclosure.Warning: The RCD used in Clipsal 56Series modules only protects againstshocks from current passing throughthe body to earth, the cause of themajority of electrocutions. Completeprotection under all circumstances is notpossible from this or any other device.

Option availableResistant Orange - add RO toCatalogue Number e.g.56C410RC becomes56C410RCRO.

•

Live appliance Earthed metal object

Earth

A

N

E

56SC510RC

35

SWITCHED RCD PROTECTED OUTLETS

e (A) Utilisation Category M Number of Cond. Term. size in mm2 IP O/A * Dims. Matching Plug Matching Plug Socket

AC21A AC22A AC23A Rating Sockets Min. Max/Cont. Rating (H) x (W) x (D) Straight Angle Config.

10 8 8 M100 3 Flat 2.5 6 56 300x101x100 56P310 - A15 8 8 M100 3 Flat 2.5 6 56 300x101x100 56P315 - B10 10 10 M100 4 Round 1.5 16 56 204x198x135 56P410 56PA410 K20 20 20 M100 4 Round 1.5 16 56 204x198x135 56P420 56PA420 L32 32 20 M100 4 Round 4 16 56 204x198x135 56P432 56PA432 N40 32 20 M100 4 Round 10 16 56 204x198x135 56P440 56PA440 O10 10 10 M100 5 Round 1.5 6 56 204x198x135 56P510 56PA510 Q20 20 20 M100 5 Round 1.5 16 56 204x198x135 56P520 56PA520 R32 32 20 M100 5 Round 4 16 56 204x198x135 56P532 56PA532 S40 40 20 M100 5 Round 10 16 56 204x198x135 56P540 56PA540 T

Catalogue No. of Ie Ue No. of Tripping Catalogue Catalogue Overall SocketNumber Phases (A) (V) Sockets Sensitivity Number Number Dimensions Config.

Matching Plug Angled Plug (H) x (W) x (D)

56C310EL2P 1 10 250 2 (3 flat pins) 30mA 56P310 - 243x294x105 A56C315ELP 1 15 250 1 (3 flat pins) 30mA 56P315 - 243x195x105 G56C420ELP 3 20 415 1 (4 round pins) 30mA 56P420 56P420 243x195x105 L56SO4ELP15 1 10 250 4 (auto, 3 flat pins) 30mA 56P310 - 243x294x105 A

SINGLE PHASE RESIDUAL CURRENT DEVICE

Catalogue Number I the Ui / Ue Voltage Parameters Prospective Short Conductor Terminal IP O/A * Dims.Number of Switch (A) (V) Circuit Current size in mm2 Rating (H) x (W) x (D)

Poles Min (V) Max. (V) 33kA for 40mS Min. Max/Cont.

56RC 2 20 250 190 260 Unit must be protected 1.5 6 66 107x101x100by 20A max. MCB.

Refer to page 45 for explanation of pinconfigurations.NSW Coalfield Certificate of Examination.

Note: Combinations with various pinconfigurations, current ratings and 100mAsensitivity are available to special order.

RCD PROTECTED OUTLETS

Catalogue No. of I the Ui / Ue Number of Conductor Term. IP O/A * Dims. Matching Matching Socket

Number switch (A) (V) Sockets size in mm2 Rating (H) x (W) x (D) Plug Plug Config.

poles Min. Max. Straight Angle

56C310RC 2 10 250 3 Flat 2.5 6 56 204x101x100 56P310 - A56C315RC 2 15 250 3 Flat 2.5 6 56 204x101x100 56P315 - B56C410RC 3 10 500 4 Round 1.5 16 56 300x101x135 56P410 56PA410 K56C420RC 3 20 500 4 Round 1.5 16 56 300x101x135 56P420 56PA420 L56C432RC 3 32 500 4 Round 4 16 56 300x101x135 56P432 56PA432 N56C440RC 3 40 500 4 Round 10 16 56 300x101x135 56P440 56PA440 O56C510RC 4 10 500 5 Round 1.5 16 56 300x101x135 56P510 56PA510 Q56C520RC 4 20 500 5 Round 1.5 16 56 300x101x135 56P520 56PA520 R56C532RC 4 32 500 5 Round 4 16 56 300x101x135 56P532 56PA532 S56C540RC 4 40 500 5 Round 10 16 56 300x101x135 56P540 56PA540 T

Portable CombinationSwitched Socketswith RCD

Ruggedly constructed, theseportable units feature an easy to carryhandle, a hanging facility for builders’poles and 3 metres of heavy-dutyflexible cord.

56SO4ELP15 56C310EL2P 56C420/ELP

Plug onend of

flex

56P310

56P315

56P420

56P315

Contact your Clipsal office for availability.

36

Combination SwitchedSockets and 24 Hour Timer

Clipsal combinations with a timer havebeen specially developed for swimmingpool applications. Both manual andautomatic switching are provided. Whenmanual switching is desired, the time clockis overridden, allowing the unit to beoperated as required.

The 24 hour timer has been expresslydesigned for Australian conditions.

All units are supplied with a Clipsal 439PVC Plug and Clipsal 437PR WeatherproofRing for each socket outlet.

Options available56CTC and 56CTC15 areavailable less enclosure e.g.56CTC becomes 56CTCLE.

56CTC2S0 56CTC

Catalogue Ithe Ui / Ue Utilisation Category Ie (A) Transformer M No. of Cond. Term. size in mm2 TimerNumber (A) (V) AC21A AC22A AC23A Rating Sockets Min. Max. Type

56CTCT150 10 250 10 8 8 32V 150W M80 Single 3 flat pins 1.5 8 56TC56CTCT150/12 10 250 10 8 8 12V 150W M80 Single 3 flat pins 1.5 8 56TC56CTCT150/24 10 250 10 8 8 24V 150W M80 Single 3 flat pins 1.5 8 56TC

•

Catalogue Ithe Ui / Ue No. of M Conductor Term. Timer Ie (A) Utilisation Category Minimum IP O/A* Dims.

Number (A) (V) Sockets Rating size in mm2 Type Time Switch Rating (H) x (W) x (D)

Min. Max. AC21A AC22A AC23A Duration

56CTC 10 250 1 (3 flat pins) 80 1.5 6 56TC 10 8 8 15 mins. 56 300x101x10056CTC15 15 250 1 (3 flat pins) 80 1.5 6 56TC 15 8 8 15 mins. 56 300x101x100*56CTC2SO 10 250 2 (3 flat pins) 80 1.5 6 56TC 15 8 8 15 mins. 56 204x198x100*56CTC2SO15 15 250 2 (3 flat pins) 80 1.5 6 56TC 15 8 8 15 mins. 56 204x198x100

Ui - Insulation VoltageUe - Operational VoltageIthe - Conventional Enclosed Thermal CurrentIe - Operational Current

Approvals No. S/1/56CTC Series.Please ensure the appropriate 56 SeriesPlug is used for weatherproof integrity.

*Circuit protection device (HRC Fuse orMCB) to be 16 amp. maximum.* Refer rear of Catalogue for further details.

Combination SwitchedSocket Timer andTransformer

The Clipsal combination with timerand transformer was also developed forpool applications. It has inbuilt segrega-tion of 250V and low voltage services.

The 24 hour timer has 96 individualsettings at 15 minute increments.

Both manual and automatic switch-ing are provided and all relevant internalwiring is supplied and connected. Referto 56T150 for transformer details.

56CTC150

Ue

- Operational VoltageUi - Insulated VoltageIe - Operational CurrentIthe - Conventional Enclosed Thermal Current

Note: AC utilisation categories to AS3947.3* Refer rear of Catalogue for further details.

37

TRANSFORMERSClipsal transformers are ideal for

swimming pool lighting applications.The 56T150 Series is manufactured

to AS3126 and features self resettingshort circuit protection against thermaloverload.Note: We recommend that thetransformer be installed in a positionwhich provides protection against directsunlight on exceptionally hot days. Thiswill ensure no nuisance activation of theshort circuit protection device. Thermallyoperated, the device is incorporated inthe primary side of the transformer, andwill cut out to protect the unit from over-heating.

56T150 56T150/2

Catalogue Rated Voltage Number Conductor Term. size in mm2 O/A* Dims.

Number Input Output Tranformers Min. Max. (H) x (W) x (D)

56T150 250V 32V (150VA) 1 1.5 10 300x101x9656T150/2 250V 32V (150VA) 2 1.5 10 300x198x9656T150/12 250V 12V (150VA) 1 1.5 10 300x101x9656T150/12/2 250V 12V (150VA) 2 1.5 10 300x198x9656T150/24 250V 24V (150VA) 1 1.5 10 300x101x9656T150/24/2 250V 24V (150VA) 2 1.5 10 300x198x96

WALL LIGHTSNeat and discreet, Clipsal wall lights

are the simple way to brighten up allsorts of situations - indoors and out.

They can be either surface mountedor flush mounted, making them ideal forgarden areas, paths, walkways,subways, etc. - and indoor situationsincluding stairwells and cellars.

Both versions suit single endedfluorescent lamps (Philips PL5 up toPL7), complete with opal polycarbonatediffuser, and come complete with thefollowing accessories.

56FWL 56WL

56FWL Flush MountedWall Light

56E2 Enclosure.Lens.Lamp assembly (as for 56WL).Flush-mounting bracket with foamgasket and sealing screws.

•••

56WL Surface MountedWall Light

56E2 Enclosure.Lens gasket and sealing screws.Lamp assembly (comprising lampholder ballast, terminal block andbracket). Lamps purchasedseparately.

•••

Catalogue Type IP Rating O/A* Dims.

Number Mounting (H) x (W) x (D)

56WL Surface 66 204x101x9156FWL Flush 43 254x157x84

Note: IP66 rating is ensured whensurface mounting, but when flushmounting, IP66 will depend on (1) type/texture of the wall surface and (2) carewhen mounting to seal all areas wherewater may enter unit.



Minimum Time O/A Size IPSwitch Duration (H) x (W) x (D) Rating

15min. 300x198x98 5615min. 300x198x98 5615min. 300x198x98 56

38

56E2/4EL denotes an E2 enclosurecomplete with 56EL4N Cover and DINraill to suit 4EL RCDs.

MOUNTING ENCLOSURES(BACK BOXES)

56E Series

Catalogue No. of O/A* Dims. Mounting No. of Cut Out

Number Gangs (L) x (W) x (D) Points Conduit Entries (mm) Provision (mm)

56E1 1 101x101x63 8 2x25, 1x32 1x25/3256ES1 1 101x101x38 4 1x25, 1x20 1x20/2556E2 2 198x101x63 8 2x25, 1x32 1x25, 1x3256ED2 2 198x101x100 8 2x40 1x25, 1x3256ES2 2 198x101x38 4 1x25, 2x20 2x20/2556E2/4EL 2 198x101x105 8 2x25, 1x32 1x25, 1x3256E3 3 294x101x63 16 2x25, 1x32 2x25, 1x3256E4 4 198x198x63 16 2x25, 2x32 2x25, 1x32, 1x4056E4VH 4 391x101x63 16 2x25, 1x32 2x25, 1x32, 1x4056E6 6 294x198x63 24 2x25, 2x32 2x25, 2x32, 2x4056E8 8 391x198x63 28 2x25, 2x32 4x25, 2x32, 2x40

56E8SB 1 pillar removed 8 391x198x63 28 2x25, 2x32 4x25, 2x32, 2x4056E9 9 294x294x63 28 3x25, 3x32 4x32, 2x32, 2x40

56E9SB 2 pillar removed 9 294x294x63 28 3x25, 3x32 4x32, 2x32, 2x4056E16 16 391x391x63 48 2x25, 2x32 6x25, 6x32, 4x40

BRIDGES AND DIVIDERS56 Series Bridges (56B) provide a

continuous flat surface for socket andswitch modules in multigang enclosures,thereby ensuring sealing.

Dividers (56DV) are available tosegregate services in enclosures.

All Clipsal Mounting Back Boxes aremoulded in UV stabilised rigid PVC tofacilitate glueing of fittings for conduitentry.

Ample conduit and cable entries areprovided and there is plenty of wiringroom for easy installation.

All screwed conduit entries areprovided with plugs. The multigangenclosures feature moulded bridgesbetween modules to ensure switchesand sockets sit flush on a continuoussurface. Moulded dividers are alsoavailable for multigang boxes to seg-regate services and are standard with 4,6, 8, 9 and 16 gang enclosures.

Each enclosure has a number ofmounting points and 220/10 SealingPlugs are provided to double insulatemounting screw heads and ensure theIP rating.

Moulded gaskets are supplied withswitch and socket modules.

Mounting AccessoriesStainless steel pole mountingbracket kit to suit 56E2, 56E3 and56E4VH Modules. Catalogue No.56PMK.Stainless steel mounting feet suitall enclosures. Catalogue Number56MF.

•

•

Options AvailableResistant Orange - add RO toCatalogue Number e.g. 56E2becomes 56E2RO.Resistant White - add RW toCatalogue Number e.g. 56E2becomes 56E2RW.Chemical Grey - add CG toCatalogue Number e.g. 56E2becomes 56E2CG.

•

56B

56DV


ANTI-CORROSIONENCLOSURE SCREWS

Catalogue No. 56MSThese stainless steel screws are

32mm long M3.5 x 0.8 / 6NC to suit 56ESeries Enclosures.

56MS

56E2/4EL

39

MOUNTING ENCLOSURE LIDS(COVERS)Mounting enclosure lids are moulded

in UV stabilised polycarbonate.All are 28mm high and supplied

complete with sealing gasket.Option available

Resistant Orange - add RO to Cat.No. e.g. 56L1 becomes 56L1RO.56L1 available in ChemicalResistant Grey - add CG to Cat.No. e.g. 56L1 becomes 56CL1CG.Resistant White - add RW to Cat.No. e.g. 56L1 becomes 56L1RW.

56L1

56L2

56L3

56L4

Catalogue Number of Dimensions (mm)

Number Gangs A B C D E

56L1 1 95 95 28 84 8456L2 2 192 95 28 84 18156L3 3 288 95 28 84 27756L4 4 192 192 28 181 181

56RC4N

SWITCHGEAR COVERASSEMBLIESThe 56 Series Two Gang Cover

Assemblies are moulded in hi-impactpolycarbonate and feature a speciallydesigned mounting bracket which willaccommodate the full range of Clipsalcircuit breakers, RCDs and combinationMCB/RCDs.

Covers suit all 56 Series Enclosures(minimum standard depth 63mm) andare supplied with neon indicators whichcan be wired from either the line or loadside of the switch.

The unique protective membraneversions offer the same level of safetyeven when the flap is opened. A specialmembrane, incorporated into the unitscovers MCBs, RCDs and accessoriesto provide a barrier against dust andwater, including wet hands when theflap is opened to reset switches.

PRE-DRILLED MOUNTINGENCLOSURE LIDSOne gang, 28mm high lids are also

available pre-drilled to accept 22 or30.5mm diameter IP56 rated push-buttons or indicating lights. Dimensionsare identical to the 56L1.

•

•

•

56L3, 56L1

Option availableResistant Orange - add RO toCatalogue Number e.g. 56CB1Nbecomes 56CB1NRO.Resistant White - add RW toCatalogue Number e.g. 56RC4Nbecomes 56RC4NRW.Chemical Grey - add CG toCatalogue Number e.g. 56CB1Nbecomes 56CB1NCG.Protective membrane - add M tocatalogue number e.g. 56CB1Nbecomes 56CB1NM.56RC4N is NOT available withprotective membrane.

•

•

•

•

•

56L1 Series

*Less Neon*Refer to rear of catalogue for further details.

Catalogue Hole No. of FNumber Diameter Holes

56L1/22 22.2mm 1 -56L1/22/2 22.2mm 2 2056L1/30 30.5mm 1 -56L1/30/2 30.5mm 2 20

Catalogue Neon Module No. of Module

Number Voltage Type Poles Width

56CB1N 250 MCB 1 156CB2N 440 MCB 2 256CB3N 440 MCB 3 356EL2N 250 4EL RCD 2 2½*56EL2 4EL RCD 2 2½56EL4N 440 4EL RCD 4 456RC4N 440 MCB+RCDs 4 4

40

ADAPTABLE ENCLOSURESClipsal Adaptable Enclosures are

supplied complete with gear tray tomount control equipment, contactors,relays, time switches, transformers, etc.

Transparent deep lids (covers),sealing screws and gasket are stan-dard.

Gear trays have eight mountingpoints for optimum securing. Impactresistant and UV stabilised, the backboxand gear tray are moulded in PVC andthe lid in polycarbonate.

Option availableResistant Orange for56DB2 only - add RO toCatalogue Number e.g.56DB2 becomes 56DB2RO.Other resistant versionsavailable to special order.LID ONLY - Add L tocatalogue number.e.g. 56DB2 becomes56DB2L

•

Catalogue Number of O/A* Dims. Number of IP Cut Outs

Number Gangs (H) x (W) x (D) Mounting Points Rating (mm)

56DB2 2 198x101x140 8 IP66 1x25, 1x3256DB3 3 294x101x140 12 IP66 2x25, 1x3256DB4 4 198x198x140 16 IP66 2x25, 1x32, 1x40

56XDB4 4 198x198x180 16 IP66 2x25, 1x32, 1x4056DB6 6 294x198x140 24 IP66 2x25, 2x32, 2x40

56XDB6 6 294x198x180 24 IP66 2x25, 2x32, 2x4056DB9 9 294x294x180 28 IP66 4x25, 2x32, 2x40


56DB3 56DB6

JUNCTION BOXES56 Series Junction Boxes are

designed for industrial environments.They are supplied complete with Earthand Neutral connectors for up to 3 x6mm2 cables and sealing gasket.

25mm and 32mm screwed conduitentries and sealing plugs are provided,as are cable entry cut outs in the back.

Options availableResistant Orange for 56JB1 and56JB2 only - Add RO toCatalogue Number e.g. 56JB1becomes 56JB1RO.Other resistant versions available tospecial order.

•

•

Catalogue No. of O/A* Dims. IP Cut Outs

Number Gangs (H) x (W) x (D) Rating (mm)

56JB1 1 107x101x90 IP66 1x25/3256JB2 2 204x101x90 IP66 1x25, 1x3256JB3 3 300x101x90 IP66 2x25, 1x3256JB4 4 204x198x90 IP66 2x25, 1x32, 1x40


TWO APERTUREENCLOSURE IP66Apertures suit Clipsal’s popular 30

Series Mechanisms.

Options available

Other resistant versions available tospecial order.

Catalogue O/A* Dims.Number (H) x (W) x (D)

56/32 107x101x75


56/32

•

•

•

41

Option availableResistant Orange - add RO toCatalogue Number e.g. 56FA1becomes 56FA1RO.Resistant White - add RW toCatalogue Number e.g. 56FA1becomes 56FA1RW.

FLUSH SURROUNDSSurface mounted 56 Series Sock-

ets, Switches and Combinations can betransformed into flush mountingequivalents using the 56FA Surroundsand Brackets. The surrounds can beused on various types of walls to ensurea neat installation.

With a mounting enclosure(back box) in poured concrete.With a bracket on brick, brickveneer or panel walls.The brackets provide the installer

with a practical method of flush mounting56 Series Accessories. Comprehensiveinstallation instructions are supplied withall units.

56FA1, 56FA2, 56FA3 and 56FA4Flush Surrounds contain a mouldedflange, foam gasket and stainless steelmounting screws.

56FA1B, 56FA2B, 56FA3B and56FA4B Flush Surrounds contain acorrosion resistant steel mounting metalbracket.

•

• Catalogue No. of Dimensions

Number Gangs A B C D E

56FA1 1 157 157 13 9756FA1B 1 141 141 8256FA2 2 157 254 13 97 19456FA2B 2 141 242 82 17956FA3 3 157 350 13 97 28156FA3B 3 141 338 82 27556FA4 4 254 254 13 184 18456FA4B 4 242 242 179 179

•

•

Metal BracketsCorrosion Resistant Steel

Dimensional Detail(mm)Moulded SurroundsUV Stabilised PVC

56FA1 56FA2 56FA1B 56FA2B

COMPUTER SURFACEMODULES

56/01X 56/01/1

Catalogue Description IP O/A* Dims.

Number Rating (W) x (H) x (D)

56/01/1 Suits DB25 66 107x101x73Connector

56/01X Blank Unit 66 107x101x73


•

Connection of computer and othercommunication equipment in factoryenvironments is now possible with theClipsal 56/01/1 and 56/01X.

Both units are single gang 56 SeriesModules.

The 56/01/1 enables the fitting ofone DB25 Connector.

The 56/01X is a blank plate whichwill enable any specific customerrequested configuration socket to befitted by the installer.Options available

Less enclosure - add LE toCatalogue Number e.g. 56/01/1becomes 56/01/1LE.

42

Available in a fully modular designthat lets you mix and match from 2 to 16gangs. With an IP66 Rating they come inHigh Impact Grey (GY) and ChemicalResistant Orange (RO). You can makeyour own switchboard by fixing moduledevices together.

Features• 4 and13 modules wide to suit DIN

Rail RCDs, MCBs, MCB/RCDs andaccesories.

• Deep cover for ample wiring roomabove and below the DIN rail.

• Solid damage resistant cover.• Cover latches open for easy

maintenance.• Space above MCBs to accept

locking off and padlockingaccessories.

• IPA identification drill outs.• Time saving drop in cradle for easier

cable installation on 56SB4.563/10 Earth and neutralterminator accommodating3 x 6mm2 cables.

Options Available:• Special 56E8 and 56E9 mounting

enclosures (Backboxes) availablewith removable pillar to suit 56SB13add SB to cat no. e.g. 56E8becomes 56E8SB.

• Less enclosure - add LE to cataloguenumber e.g. 56SB13 becomes56SB13LE.

• Resistant Orange for 56SB4 - add ROto catalogue number e.g. 56SB4becomes 56SB4RO.

56SB13Features a lockable cover

for padlocking up to 7mmdiameter clasp. Full size heavy-duty neutral earth bar to accept 2x 35sq.mm, 5 x 16sq.mmunprotected / 2 x 35sq.mm, 8 x16sq.mm protected and 2 x35sq.mm, 12 x 16sq.mm earth.Neutral/Earth bar raised abovethe base for easy termination.

Catalogue Number Description

56SB4 Consumer switchboard 4 Modules Full DIN withNeutral Bar and Earth Connector (IP66)

56SB13 Consumer switchboard 13 Modules FullDIN with Neutral and Earth Bars. IP66

56SBLK Field fittable Key Lock Kit.

56 SERIESDISTRIBUTION BOARD

56SB13

43

56SB4Features a lockable cover for pad-

locking up to 7mm diameter clasp. Fullsize heavy-duty neutral bar to accept 1 x35sq.mm, 4 x 16sq.mm and 1 x35sq.mm. Neutral bar raised above thebase for easy termination.

56SB4

ARMOURED CABLEJUNCTION BOXAvailable in High Impact Grey (GY)

and Chemical Resistant Orange (RO),this 56 Series Junction Box is ideal forinstallation where cables tee-off toluminaires.

Steel wire armoured cables areinternally earthed using a specialmounting plate to ensure an IP66 rating.The plate is fitted with 70mm wide DINrail for DIN style terminals. Space fromthe DIN rail to the lid is 58mm.

Each enclosure comes with loose 3x 563G2 Active Terminals, 1 x 563N10Neutral Terminal and 1 x 563E10 EarthTerminal (suitable for 3 x 6sq.mm). Thebox also comes with 3 x 20mmscrewed conduit entries complete withblanking plugs.

Catalogue No. of O/A* Dims. Cut Outs

Number Gangs (H) x (W) x (D) (mm)

56JB1SWA 1 107 x 101 x 90 1 x 25/32

56JB1SWA

56 SERIESDISTRIBUTION BOARD

44

Catalogue Motor Starter c/w Reset

Number Rating Isolator Only

56YD9 7.5 56YD9SW 56YD9R56YD12 11 56YD12SW 56YD12R56YD16 15 56YD16SW 56YD16R56YD20 18 56YD20SW 56YD20R56YD26 22 56YD26SW 56YD26R56YD33 30 56YD33SW 56YD33R

56YD RANGE

MOTOR STARTERSThe rugged reliability and modular

construction of Clipsal 56 SeriesIndustrial Switchgear, when combinedwith the cutting edge technology of theClipsal 6 Series range of Contactors andOverload Relays, will give you the mostexciting breakthrough in motor controltechnology.

56 Series Motor Starters offerunequalled levels of design flexibilitytogether with superior on-the-jobperformance.

FeaturesModular flexibility. Starters can becoupled with almost any numberof 56 Series Modules in oneenclosure.Ease of wiring.UV stabilised for proven outdoorperformance.Chemical Resistant Orange (RO)enclosures are available for environ-mentally aggressive locations.Hoseproof and dustproof to IP66.

•

••

•

•

Heavy-duty impact resistantenclosure.Customised units can be orderedto meet individual customerrequirements.

•

••••

Models availableDirect-On-Line (DOL) StartersReversing (ROL) StartersEnclosed Star-Delta Starters

Refer to separate catalogue on 56Series Motor Starters for furtherdetails.

Two Contactor Motor One Contactor with

Version Rating Fwd/Off/Rev Switch

56ROL9 4 56ROL9SW56ROL12 5.5 56ROL12SW56ROL16 7.5 56ROL16SW56ROL22 11 56ROL22SW56ROL32 15 56ROL32SW56ROL38 18.5 56ROL38SW

56 ROL RANGE

Catalogue Motor C/W Reset

Number Rating Isolator Only

56DOL9 4 56DOL9SW 56DOL9R56DOL12 5.5 56DOL12SW 56DOL12R56DOL16 7.5 56DOL16SW 56DOL16R56DOL22 11 56DOL22SW 56DOL22R56DOL32 15 56DOL32SW 56DOL32R56DOL38 18.5 56DOL38SW 56DOL38R

56 DOL RANGE

45

M56 SERIES

M56E1

Mounting Enclosures(Back box)

Fully interchangeable with the 56Series. Application - can be used withplastic range to provide Earthingcontinuity when using metal conduit orsteel wire armoured cables.

M56E1 = 2 x 25 Dia. and 1 x 32 Dia.conduit entries available.

M56E1U = no entries for drilling bycustomer.

Other entries are available asspecials.

Lids OnlyM56L1 Lids are available complete

with sealing gasket.

Catalogue Number of Ithe Ui/Ue

Number Switched Poles (A) (V)

M56SW110HD 1 10 250M56SW120 1 20 250M56SW132 1 32 250M56SW150 1 50 250M56SW163 1 63 250M56SW220 2 20 500M56SW232 2 32 500M56SW250 2 50 500M56SW263 2 63 500M56SW310 3 10 500M56SW320 3 20 500M56SW332 3 32 500M56SW350A 3 50 500M56SW350B 3 50 500M56SW363A 3 63 500M56SW363B 3 63 500M56SW420 4 20 500M56SW432 4 32 500

M56JB1 M56PBS1 M56SW320

Cast Metal SwitchesCrafted in cast aluminium and

interchangeable with the 56 Series, theM56 Series is the solution for industrythat requires switches that will withstandhigh temperatures, aggressive environ-ments and offer increased impactresistance.

The simply styled modules have anIP66 rating. Dirt and other foreignobjects cannot enter reccesses andcrevices, making this series ideal forenvironments such as food processingplants.

The switch has a rotary action thatis easy to operate, even if wearinggloves. The 'ON' and 'OFF' switchpositions are clearly marked as are thecurrent ratings.

Less Enclosure (LE) versions arealso available, which are fully compatiblewith the 56 Series Enclosures.

Note: Refer to separate M56 Seriescatalogue for further details.

Junction BoxesDesigned for the heavy industrial

environments the M56JB1 has 2 x 25Dia. and 1 x 32 Dia. entries and comescomplete with Earth and Neutralconnectors for up to 3 x 6mm sq. mm.cables and sealing gasket.

Surface Switches

Ui - Insulated VoltageUe - Operational VoltageIthe - Conventional Enclosed Thermal

Current

Catalogue EntryNumber Size

M56CP20 20mmM56CP25 25mmM56CP32 32mmM56CP40 40mm

Metal Conduit Plugs

Catalogue Ithe Ui / Ue

Number (A) (V)

M56PBS1 10 240

Push-buttonsThis rugged range rated at IP66

consists initially of one configurationonly. This station has a mushroom headwith twist reset and red push-button.

46

66CV SWITCHED SOCKETOUTLETSMajor features of the 66CV Series

are its robust PVC back box andpolyester cover that provide excellentchemical and high impact resistance aswell as UV stability, in a neat, compactunit that's quick and easy to install.

An internal interlock is fitted to theoutlet to prevent insertion or withdrawalof the plug (provided the plug is fittedwith an interlock facility) while the switchis in the 'ON' position.

66CV Series Combination SwitchedSocket Outlets also incorporate apadlock facility in the 'OFF' position for

Cat. No. Ith Ui No. of Cable Terminal Size Cable Nominal Diameter IP Entry SizeStraight (A) (V) Pins (mm2) (in mm) Rating (mm)

Min Max / Cont. Min. Max.

66P450 50 500 4 6 25 25.5 40 66 5066P550 50 500 5 6 25 25.5 40 66 5066P750 50 500 7 6 25/10 25.5 40 66 5066P463 63 500 4 6 25 25.5 40 66 5066P563 63 500 5 6 25 25.5 40 66 5066P763 63 500 7 6 25/10 25.5 40 66 50

Ue - Operational Voltage

added safety and security.Hole diameter 7.8mm.

66CV563

Options availableNeon Kit (66N415) for field fit. Red,415V, flying leads for customerconnection to indicate either ‘poweron’ or ‘switch off’. Requires a 12mmdiameter hole.Keylock Kit (66KEY) for field fit.Uses a locking system compatiblewith the 56 Series.Normally locks in the ‘OFF’ positionbut can be converted to lock in the‘ON’ position. Department of Labourapproval is recommended beforemaking this modification.Resistant Orange - add RO toCatalogue Number e.g. 66CV450becomes 66CV450RO.

Note: AC utilisation categories toAS3947.3

Catalogue No. of I the Ui Ie (A) Utilisation M No. Conductor Term. IP O/A * MatchingNumber switch (A) (V) at Ue=415V Rating o f size in mm2 Rating Dimensions Plug

poles AC21A AC22A AC23A Sockets Min. Max/Cont (H) x (W) x (D) Straight

66CV450 3 50 500 50 50 40 - 4 10 25 66 320x160x215 66P45066CV550 4 50 500 50 50 40 - 5 10 25 66 320x160x215 66P55066CV750 4 50 500 50 50 40 - 7 10 25/2.5 66 320x160x215 66P75066CV463 3 63 500 63 63 50 - 4 16 35* 66 320x160x215 66P46366CV563 4 63 500 63 63 50 - 5 16 35* 66 320x160x215 66P56366CV763 4 63 500 63 63 50 - 7 16 25/2.5 66 320x160x215 66P763

Ithe - Conventional Enclosed Thermal CurrentUi - Insulated VoltageIe - Operational Current

* Refer rear of Catalogue for further details.Some restrictions may apply if usingconduit for 35mm2 conductors.

66P SERIESSTRAIGHT PLUGSThe 66P Series is constructed of

fully moulded, transparent polycarbon-ate. This makes for easy installation andinstant visual checking of connections.All models are also insulated foroperator safety.

Designed for heavy industrial areas,all 66P models are impact resistant,insulated and contain corrosion proofmetal components and UV stabilisedmouldings.

For convenience and safety the plugcan be used with gloved hands and hasa mechanical interlock facility to preventwithdrawal of the socket outlet while thepower is still on.

Ithe

- Conventional Free Air Current

Options availableSpare cable clamp Cat. No. 66PCC.Resistant Orange - add RO toCatalogue Number. e.g. 66P450becomes 66P450RO.

•

66P563

•

•

•

47

INTERNAL SOCKET AND PINHOUSINGSAs with the 56 Series, the 66 Series

offers a full range of replacement socketand pin housings.

They eliminate the expense ofreplacing an entire unit if only thehousing is damaged.

Catalogue Ith Ui No. of Conductor Term. size in mm2

Number (A) (V) Round Pins Min. Max./Cont.

66SO450G 50 500 4 10 2566SO463G 63 500 4 16 2566SO550G 50 500 5 10 2566SO563G 63 500 5 16 2566SO750G 50 500 7 10 25/2.566SO763G 63 500 7 16 25/2.566P450G 50 500 4 6 2566P463G 63 500 4 6 2566P550G 50 500 5 6 2566P563G 63 500 5 6 2566P750G 50 500 7 6 25/1066P763G 63 500 7 6 25/10

Pin Configurations (AS3123 - 1994)

L2L3

L1NE

L2L3

L1NE

L2L3

L1E

L2L3

L1E

66P450 66P550 66P463 66P563

48

56CV332

With Interlock56CVI32056CVI332

500V Three PhasePlugs

Angle56PA41056PA42056PA43256PA44056PA45056PA51056PA52056PA53256PA54056PA55056PA61056PA71056PA720

Straight56P41056P42056P43256P44056P45056P45056P51056P52056P53256P54056P55056P61056P71056P720

250V a.c. and LowVoltage Plugs56P21056P215/3256P3/11056P31056P310L563P10RP56P31356P32056P320F56P33256PA32056PA332

Appliance Inlets56AI31056AI31556AI41056AI42056AI43256AI44056AI45056AI51056AI52056AI532

56SW340C56SW350C56SW363C

250V Two-waySwitches (Single andTwin with SlidingSwitch Dollies)56SSW1056SSW1556SSW2/1056SSW2/15

500V Three PhaseCombinationSwitched Sockets56C41056C42056C43256C44056C45056C51056C52056C53256C54056C55056C61056C71056C72056CV41056CV42056CV43256CV44056CV45056CV51056CV52056CV53256CV54056CV55056CV61056CV71056CV720

250V and Low VoltageSwitched Sockets(Single and DoublePole Combination)

2 Module56C21056C215/3256C3/11056C31056C310D56C310L56C310RP56C31356C31556C315D56C32056C332

With Standard OnePiece Cover56CV31056CV31556CV320

56AI54056AI550

500V Three PhaseAppliance Connectors56CSC41056CSC42056CSC43256CSC44056CSC45056CSC51056CSC52056CSC53256CSC54056CSC550

Department ofIndustrialRelationsCoal Mines RegulationAct 1982

Rotary Switches (Single,Double and Triple Pole)56SW12056SW13256SW15056SW22056SW25056SW32056SW33256SW350

500V Three PhaseSockets56SO53256SO55056SO54056SO61056SO71056SO720

500V Three Phase AnglePlugs56PA41056PA51056PA52056PA53256PA54056PA55056PA61056PA71056PA720

LLOYD’S REGISTEROF SHIPPINGAPPROVALS FOR56 SERIESSWITCHGEAR

500V Three PhaseSockets56SO41056SO42056SO43256SO44056SO45056SO51056SO52056SO53256SO54056SO55056SO61056SO71056SO720

250V and Extra LowVoltage Sockets56SO21056SO215/3256SO3/11056SO31056SO310L56SO310RP56SO31356SO31556SO32056SO320F56SO332

Rotary Switches(Single, Double andTriple Pole)56SW11056SW110/256SW11556SW115/256SW12056SW13256SW14056SW15056SW16356SW22056SW23256SW24056SW25056SW26356SW31056SW32056SW33256SW34056SW34056SW35056SW36356SW310C56SW320C56SW332C

56 Series accessories complywith the relevant parts of thefollowing standards:AS3123 - Approval and testspecifications - plugs, socketoutlets and couplers forgeneral industrial application.AS3133 - Approval and testspecifications - air breakswitches.

49

PLUGCONFIGURATIONS

2 & 3 Pin

10A 250V

A

15A 250V

B

10A 250V

C

10A 250V

D

15A 32VPolarisedE

20A 250V

F

10A 250V

G

20A 250V

H

32A 250V

I

10A 110V

J

4 Pin

10A 500V

K

20A 500V

L

15A 500V(unique)M

32A 500V

N

40A 500V

O

50A 500V

P

5 Pin

10A 500V

Q

20A 500V

R

32A 500V

S

40A 500V

T

50A 500V

U

6 Pin

10A 500V

V

7 Pin

10A 500V

W

20A 500V

X

15A 500V(unique)M

32A 500V

N

40A 500V

O

50A 500V

P

5 Pin

10A 500V

Q

20A 500V

R

32A 500V

S

40A 500V

T

50A 500V

U

6 Pin

10A 500V

V

7 Pin7 Pin7 Pin7 Pin7 Pin10A 500V

W

20A 500V

X

SOCKETCONFIGURATIONS

2 & 3 Pin

10A 250V

A

15A 250V

B

10A 250V

C

10A 250V

D

15A 32VPolarisedE

20A 250V

F

10A 250V

G

20A 250V

H

32A 250V

I

10A 110V

J

4 Pin

10A 500V

K

20A 500V

L

50

101

REAR MECHANISMS

FRONT COMPLETEFRONT MOUNTING ENCLOSURE

FRONT MOUNTING ENCLOSURE SIDE COMPLETE FRONT COMPLETE

56C210

N A

ENTRIES

CUT-OUTS

CONDUIT2 x M25

ENTRYCONDUIT1 x M25

CUT-OUT

CUT-OUT

1 x M32

1 x M25

L

C1L 1L

REAR MECHANISMS REAR MECHANISMS

SIDE COMPLETE

56C310

L

AN

E

2 x M20CONDUITENTRIES

1 x M25CONDUITENTRY

2 x M20/25

56C310L

56C310RP

56C315

56C3/110

56C215/32

204

101

198

30 SERIES MECHSWITCH IS

50

56C315HD56C310HD

AA

74

140

50

50

40

18

38

80

18

C

40

50

140

75

5555

165

63

30

31

104

43

198 204

E L

REAR MECHANISMS

A A

IS PRESSURE PLATE TYPECONDUCTOR TERMINATION

ARE NOT IDENTIFIEDSWITCH TERMINALS

BACKWIREDSWITCH IS

N N

E

N

56C310D56C315D

L

AA

C1

REAR MECHANISMS

L

C

L 1

10

17

TECHNICAL DRAWINGS

52

REAR MECHANISMS REAR MECHANISMS REAR MECHANISMS IS PRESSURE PLATE TYPECONDUCTOR TERMINATION


BACKWIREDSWITCH IS

101

FRONT MOUNTING ENCLOSURE SIDE COMPLETE FRONT COMPLETE

ENTRIESCONDUIT2 x M25

ENTRYCONDUIT1 x M32

CUT-OUT

CUT-OUT

1 x M32

1 x M25

50

56C332

AA

40

50

140

75

5555

165

63

31

104

198 204

56C53256C54056C440

56C432

E

L2

E

L3 L1

L2

E

L3 L1

N

N A

L3 L3

L2L2

L1L1

22

21

30

REAR MECHANISMS

104

SIDE COMPLETE

L3 L1

E

L2

56C450

30

21

22

63

REAR MECHANISMS

L3

L2

L1

FRONT COMPLETE

101

56C550

CONDUITENTRIES

2 x M25

ENTRY

198

CONDUIT1 x M32

L2

L1

L3

204

FRONT MOUNTING ENCLOSURE

40

165140

5555

75

CUT-OUT

50

1 x M25

1 x M32CUT-OUT

50

21

L3

E

L1

L2

IS PLAIN SCREW TYPECONDUCTOR TERMINATION


BACKWIREDSWITCH IS

N

E

L2

L3

E

L1

L2

L3

E

L1

53


CUT-OUTS

SIDE COMPLETE


1 x M25CONDUITENTRY

2 x M20/25

56CV310

204

101

198

30 SERIES MECHSWITCH IS

74

140

50

50

40

18

38

80

18

C1

10

10

1L

C

N E A

C

REAR MECHANISMS

56CV315

30


A

56CV310HD56CV315HD

165 140

REAR MECHANISMS

A E

N

L

A

40

50

5555

50

CUT-OUT

CUT-OUT

1 x M25

1 x M32

75CONDUIT

SWITCH ISBACKWIRED

SWITCH TERMINALSARE NOT IDENTIFIED

CONDUCTOR TERMINATIONIS PRESSURE PLATE TYPE

SIDE COMPLETE

43

104

31


ENTRY101

FRONT COMPLETE

198 204

63 1 x M25

55

104

SIDE COMPLETE

L3 L1

E

L2

30

22

63

L3

L2

L1

FRONT COMPLETE

CONDUITENTRIES

2 x M25

ENTRY

198

CONDUIT1 x M32

L2

L1

L3

204


40

165 140

5555

75

CUT-OUT

50

1 x M25

1 x M32CUT-OUT

50

21

L3

E

L1

L2



BACKWIREDSWITCH IS

N

REAR MECHANISMS

56CV450

REAR MECHANISMS

56CV550

198

1 x M25

1 x M32

CUT-OUT

CUT-OUT



BACKWIREDSWITCH IS

L1

L2

L3

L1

L2

L3


40

50

140165

5555

75

50

REAR MECHANISMS

56CV440

L2

L3

E

L1

REAR MECHANISMS

56CV540

L3 L1L3 L1

EE

N

L2L2

SIDE COMPLETE

56CV432

30

21

104

31

22

63

56CV532

CONDUITENTRIES

2 x M25

FRONT COMPLETE

198

1 x M32CONDUITENTRY

204

101

21

56

56RC


CUT-OUT


1 x M25/32

REAR MECHANISMS

1 x M25CONDUITENTRY

101

107101

SIDE COMPLETE

E

NA

35

74

5555

40

50

70 45

100

63

30

43

SIDE COMPLETEFRONT MOUNTING ENCLOSURE

56C315RC56C310RC

140165

REAR MECHANISMS

1 x M32

1 x M25

CUT-OUT

CUT-OUT

40

50

5555

75

50

30

198

100

63

2 x M25

ENTRIESCONDUIT

1 x M25CONDUITENTRY

101

FRONT COMPLETE

204

35

A N

CONDUCTORS

LINE

BUTTON

TEST

A

N

A

H

N

E

POWERAVAILABLEL.E.D.

CONDUCTORS

LOAD

CONDUCTORS

LINE

TEST

BUTTON

A

N

POWER

L.E.D.AVAILABLE

H

CONDUCTORS

LOAD

A

N

AA N

LINE

LOAD

AA N

E

N

L

A

59

E

REAR MECHANISMS

N

L

A


235260 70 45

40

50

CUT-OUT1 x M25

1 x M32CUT-OUT

55

50

75

CUT-OUT1 x M25

SIDE COMPLETE FRONT COMPLETE

300

30

100

2 x M25CONDUIT

ENTRIES

30

63

ENTRY

CONDUITCONDUIT

294

101

1 x M25

56SC310RC

43

56SC315RC

A N

BUTTON

CONDUCTORS

LINE

TEST

A

N

35

CONDUCTORSE

N

A

LOAD

AVAILABLEPOWER

H

L.E.D.

31

NAA

LINE

62

56SO215/32


56SO210

CUT-OUTS

L


SIDE COMPLETE

56SO310

L

AN

E


1 x M20/25

56SO310L

56SO310RP

56SO315

56SO3/110

50

40 18

REAR MECHANISMS

L

17

1 x M25CONDUITENTRY

10174

45

75

38

18

107101


45

40

CUT-OUTS1 x M20/25

50

18

38

1874

101

75

ENTRY

1 x M25CONDUIT

FRONT COMPLETE

101

107

56SO310A

REAR MECHANISMS

N E A

7

CONDUITENTRIES

2 x M20

56SO315A

SOCKET OUTLET BACKWIREDCONDUCTOR TERMINATIONIS PLAIN SCREW TYPE

CONDUCTOR TERMINATIONSOCKET OUTLET BACKWIRED

IS PLAIN SCREW TYPE

56SO320F

64

AA



BACKWIREDSWITCH IS

C

L 1

56SW110


56SW110/2

CUT-OUTS


SIDE COMPLETE


1 x M20/25

50

40 18

REAR MECHANISMS

1 x M25CONDUITENTRY

10174

45

80

38

18

107101

40

5555

74


56SW110HD

4570

REAR MECHANISMS

56SW220

1 x M25/32CUT-OUT

50

56SW320

101

REAR MECHANISMS

SIDE COMPLETE

104 ENTRIESCONDUIT2 x M25

63

ENTRYCONDUIT1 x M25

REAR MECHANISMS

FRONT COMPLETE

101

107

30

C

L

1

3

4

12 2

56SW115 56SW115/256SW110/I

31

10

SWITCH IS

1 C

2

1

C2

1

4

3

30 SERIES MECH

L3 L3

L2L2

L1L1

56SW12056SW115HD

L1L1

L2L2

56SW310

65

AA



BACKWIREDSWITCH IS

40

5555

74


56SW132

4570

REAR MECHANISMS

56SW232

1 x M25/32CUT-OUT

50

56SW332

101

REAR MECHANISMS

SIDE COMPLETE


63

ENTRYCONDUIT1 x M32

REAR MECHANISMS

FRONT COMPLETE

101

107

22

31

22


70 45

40

5555

74

50

CUT-OUT1 x M25/32

101

SIDE COMPLETE

104

ENTRIES

2 x M25CONDUIT

63

CONDUITENTRY

1 x M32

107

FRONT COMPLETE

101

56SW250

A A

56SW150

REAR MECHANISMS

56SW35056SW363


CONDUCTOR TERMINATIONIS PLAIN SCREW TYPE

SWITCH ISBACKWIRED


21

30

L2 L2

L1L1

56SW26356SW163L3 L3

L2L2

L1L1

30

L3 L3

L2L2

L1L1

L2

L1L1

L2

66

L3

L2

L1

L2

L1

L3



BACKWIREDSWITCH IS


ENTRIESCONDUIT1x M40

ENTRYCONDUIT1 x M40

101

198

REAR MECHANISMS

165 140

5555

75

CUT-OUT

CUT-OUT

50

1 x M25

1 x M32

50

100

45

14245

57


204

56SW363/2

63

SIDE COMPLETE

MICROSWITCH IS CONFIGUREDAS LATE MAKE/EARLY BREAK REAR MECHANISMS

56SW320C


4570

40

50

30

21

1 x M25/32CUT-OUT

74

55

13

30


FRONT COMPLETE


MICRO

BACKWIREDSWITCH IS

104


101

ENTRY

1 x M25CONDUIT

101

107

67

22


70 45

40

55

74

50

CUT-OUT1 x M25/32

101

SIDE COMPLETE

104

ENTRIES

2 x M25CONDUIT

63

CONDUITENTRY

1 x M32

107

FRONT COMPLETE

101

56SW332C56SW350C



SWITCH ISBACKWIRED

REAR MECHANISMS

21

30

MICROSWITCH IS CONFIGUREDAS LATE MAKE/EARLY BREAK

MICRO


4570

40

50

74

55

CUT-OUT1 x M25/32

30

30

SIDE COMPLETE

104

63

101

FRONT COMPLETE

CONDUIT

CONDUIT

ENTRIES

2 x M25

1 x M25

ENTRY

101 107

56SW420

REAR MECHANISMS

L1 L2 L3

T2T1 T3 N

N

14

13

NN

T3L3

T2L2

T1L1

SWITCH IS SIDEWIREDCONDUCTOR TERMINATIONIS PRESSURE PLATE TYPE

68

56SWH32556SWH340

56SWH46356SWH440 56SWH380

56SWH36356SWH425

72.5

43

dia.12

69

42

dia.12dia.12

42.5

51

69

204

101

FRONT COMPLETE

198

ENTRYCONDUIT1 x M32

CONDUITENTRIES

2 x M25

172

22

30

1 x M25

1 x M32CUT-OUT

50

CUT-OUT

50

5555

75

140

40

165

FRONT MOUNTING ENCLOSURE SIDE COMPLETE

63

66

61.5

66

53

86

L1

L2

L3

N

T1

T2

T3

N

SWITCHES ARE SIDEWIRED


L1

L2

L3 L3

L2

L1 L1

L3

L2

L1

L2

L3

70

21


56K2SW12056K1SW120

40

70 45

5555

74

56K2SW220

REAR MECHANISMS

50

1 x M25/32CUT-OUT

56K1SW22056K1SW32056K1SW310

REAR MECHANISMS

SIDE COMPLETE

30

104

30

63

CONDUIT2 x M25

ENTRIES

1 x M25

ENTRYCONDUIT

101

REAR MECHANISMS

FRONT COMPLETE

101

107

56K2SW32056K2SW310

56K1SW25056K1SW232


56K1SW15056K1SW132

REAR MECHANISMS

4570

40

74

5555

50

CUT-OUT1 x M25/32

56K2SW33256K2SW350

56K1SW35056K1SW332

REAR MECHANISMS

SIDE COMPLETE

104

REAR MECHANISMS

FRONT COMPLETE

ENTRY

21

30

101

ENTRIES

2 x M25CONDUIT

63

22 CONDUIT1 x M32

101

107

56K2SW25056K2SW232

56K2SW15056K2SW132

SWITCH ISBACKWIRED



L1 L1 L1

L2

L3

L1

L2

L3

L1

L2

L1

L2

IS PLAIN SCREW TYPE


BACKWIRED

CONDUCTOR TERMINATION

SWITCH ISL1L1 L1

L2

L1

L2

L3

L2

L1

L3

L2

L1

1. MS AND HS USE KEY TO SWITCH MECH.

2. MS AND HS HAVE NO SHARP EDGES ON ROTARY SWITCH KNOB

3. HS PROVIDED IN KIT FORM

NOTE:

56K1SW132HS56K2SW132MS56K1SW132MS

56K1SW332HS56K2SW332MS56K1SW332MS

71


56K2SW11556K1SW115

REAR MECHANISMS

CONDUIT2 x M20

ENTRIES

1 x M25

ENTRYCONDUIT

101

FRONT COMPLETE

101

107

2. MS AND HS HAVE NO SHARP EDGES ON ROTARY SWITCH KNOB

3. HS PROVIDED IN KIT FORM

1. MS AND HS USE KEY TO SWITCH MECH.

L1 L1

SIDE COMPLETE

45

40

50

CUT-OUTS1 x M20/25

18

18

38

74

85

L 1C

17

56K1SW115MS56K2SW115MS56K1SW115HS

NOTE:

SWITCH IS 30 SERIES MECH

38

SIDE COMPLETE

IS PLAIN SCREW TYPECONDUCTOR TERMINATIONSWITCH IS BACKWIRED


56SSR

REAR MECHANISMS

NE

UT

RA

L

LO

OP

LO

AD

LIN

E

18

7101

REMOTE TERMINAL TIMER FUNCTION IF NUETRAL POTENTIAL IS APPLIED TO

LOAD

IS OVERRIDDEN

REMOTE

LINE

LOOP

65

ENTRYCONDUIT1 x M25

FRONT COMPLETE

101

10445

40

50

1 x M20/25CUT-OUTS

74

MOUNTING FOOT56MF

18

16

6.4mm dia.

12

72

REAR MECHANISMS

56PB


45

40

1 x M20/25CUT-OUTS

50

74

SIDE COMPLETE

18

80

38

18


101

ENTRYCONDUIT1 x M25

FRONT COMPLETE

101

107

SIDE COMPLETE

18

86

18

38

18

88

18

38


101

1 x M25CONDUITENTRY

FRONT COMPLETE

101

107


101

1 x M25CONDUITENTRY

101

107


101

1 x M25CONDUITENTRY

FRONT COMPLETE

101

107

56/2PB 56PBS1 56/2PB

56PBS1

56PB

56/2PBS1

56PBS

56PB

31

42

2

1 3

4

3

42

1

SIDE COMPLETEREAR MECHANISMS FRONT COMPLETE

56/2PBS1

56PBS56PBS1

56/2PB

56PBS2

56PBS

7

7

7

2

43

1

PUSH

LOADLINE

NC-NORMALLY CLOSED CONTACTS

NO-NORMALLY OPEN CONTACTS

56PB56PBS56PBS156PBS256/2PB56/2PBS1

(NO MARKINGS,COLOUR GREEN,NON LATCHING)

(STOP,COLOUR RED,NON LATCHING)

(EMERGENCYSTOP,MARKED ON SWITCH AND PLATE,COLOUR RED MUSHROOM, LATCHING)

(STOP,COLOUR RED MUSHROOM, LATCHING)

(STOP/START,COLOUR RED/GREEN,NON LATCHING)

(STOP,COLOUR RED MUSHROOM,LATCHING)(START,COLOUR GREEN,NON LATCHING)

56PBS2

56PBS2

56/2PBS1

SWITCH IS SIDEWIREDCONDUCTOR TERMINATIONIS PRESSURE PLATE TYPE

73

17


45

40

1 x M20/25CUT-OUTS

50

74

56SSW10

SIDE COMPLETE

18

65

38

18


101

ENTRYCONDUIT1 x M25

REAR MECHANISMS

FRONT COMPLETE

101

107


101

1 x M25CONDUITENTRY

FRONT COMPLETE

101

107

38

SIDE COMPLETE

18

14

18

65

C

2L

1

REAR MECHANISMS

56SSW2/10

56SSW10/I

56SSW10

56SSW2/10

56SSW1056SSW1556SSW10/I

56SSW2/15

56SSW15 56SSW2/15

56SSW1556SSW2/1056SSW2/15

50

SIDE COMPLETE

38


40

45

CUT-OUTS1 x M20/25

50

18

1874

101

101

75


56/01/1

ENTRYCONDUIT1 x M25

56/01X


1 x M25CONDUITENTRY

FRONT COMPLETE

FRONT COMPLETE

101

107

65

101

107

REAR MECHANISMS

56SSW10/I

1

2 4

3

2

1

C

C

1

2

2

1

C

2

C

1

L2

C

1

L

4

1

3

2

5

CONDUIT

56/32

ENTRY


101

1 x M25

FRONT COMPLETE

101

107

SWITCH IS 30 MECH

74

63


56TC

4570

REAR MECHANISMS

1 x M25/32

40

50

CUT-OUT

55

74

30

30

FRONT COMPLETE

99


101

ENTRYCONDUIT1 x M25

101

10737

56TCB56TC756TCB7

M

COMMONNA12 12WAYWAY

LOOP

124

2322 21 20 19 18

1716

1514

1312

1110

987654

32

12

6

99

6

12

1218 6

6

1218

612

18

612 18 6

1218

612

186

12

18Mo

TuW

e

Th Fr

Sa

Su

56TCB56TC56TC7

56TCB7

FRONT DETAILFRONT DETAIL

AUTOMATIC CONTINUALLY CONTINUALLYTIMED SWITCH ’ON’ ’OFF’MODE

I

O O

I I

O

MANUAL SWITCH

POSITIONIN THE ’OFF’ CIRCUIT SHOWN

30


70

40

45

5555

74

50

CUT-OUT1 x M25/32

104

SIDE COMPLETE

63 1 x M25CONDUITENTRY


101

FRONT COMPLETE

101

107120

110

10090

80

70

60

50

40

3020

MINUTES

ON

OFF

REAR MECHANISMS

56SWT216

23

6 3

14

A

N

LOAD SUPPLY

OFF

OF

F

OFF

OFF

L 2 1 C N A MARKING ARROW

MANUAL SWITCH

(N/C) (N/O)

SWITCH IS SIDEWIREDCONDUCTOR TERMINALIS PLAIN SCREW TYPE

IS PRESSURE PLATE TYPECONDUCTOR TERMINALSWITCH IS SIDEWIRED

N

A

3 1

46

75

REAR MECHANISMS

56TCDB

CUT-OUT1 x M25/32


40

50

70 45

74

55

99

SIDE COMPLETE

30

37

63

30

107

ENTRIES

2 x M25CONDUIT

FRONT COMPLETE

101

ENTRY

1 x M25CONDUIT

101

CIRCUIT SHOWN IN THE ’OFF’ POSITION

WAYLOOP

WAY22 N11 A

M

COMMON

(N/O)(N/C)

L 2 1 C N A

3

13:20CH1

h

Pro

g

m

1. KEEP KEYPRESSED

DURING THE SUMMER TIME PERIOD,ALSO PRESS THE +/-1h KEY ONCE

2. SET HOURS

3. SET MINUTES

4. SET DAY OF THE WEEKi.e. 1 = MONDAY........ 7 = SUNDAY

RELEASE KEY

SETTING TIME

SWITCH IS SIDEWIREDCONDUCTOR TERMINATION IS PLAIN SCREW TYPE

1. PRESS ’PROG’ KEY AS OFTEN

AS NECESSARY UNTIL DISPLAY

SHOWS ;3

CH1

21 4 675- - : - -

PRESS ONCE TO SHOW ON

2. SELECT SWITCHING FUNCTION

PRESS TWICE TO SHOW OFF CH1

i.e. 4312 65 7ON

PRESS ’h’ REPEATEDLY

SWITCHING TIME

3. SET HOURS FOR THE

4. SET MINUTES FOR THE

SWITCHING TIME

PRESS ’m’ REPEATEDLY

i.e.

09:007

CH1

1ON

6532PM

4

- - : - -

9:00 PM

DO NOT PUSH ANY KEYS.

5. FOR OPERATING DAY OR DAYS;

- ALL DAYS OF THE WEEK,

- ANY ONE OR GROUP OF DAYS,

PRESS TO SELECT KEY AND HOLD DOWN.

PUSH ’DAY’ KEY TO DELETE NON REQUIRED DAYS

CH1

9:00 PM

i.e. 2PM 09:00

TUES.

ON

SAME WAY, STARTING WITH 1

COMMAND IS ENDED IN THE

EVERY ADDITIONAL SWITCHING

SETTING PROGRAM TIMES

FOR FURTHER DETAILSREFER OPERATING INSTRUCTIONS

DaySel

Res

+/-1h

Day

13:20

+/-1h

CH1

Pro

g 3

mh

Sel

Res

76


140 1 x M20/25

1 x M20/25

CUT-OUT

CUT-OUT

40

50

75

50

18

38


1 x M25CONDUITENTRY

198

FRONT COMPLETE

101

204

56AI42056AI410

18

138

REAR MECHANISMS

TERMINALS AREACTUALLY ANGLED,SHOWN HERE FLATFOR PICTORIAL REPRESENTATION

56AI52056AI510

REAR MECHANISMS

L3L1

L2

E

L3

E

L2

L1 N


56AI31556AI310

45

40

REAR MECHANISMS

50

CUT-OUTS1 x M20/25

18

18

38

74

101

76

2 x M20

ENTRIESCONDUIT

CONDUIT1 x M25

ENTRY

FRONT COMPLETE

101

1075

A N

E

APPLIANCE INLET IS BACKWIREDCONDUCTOR TERMINATION IS PLAIN SCREW TYPE

73


77

45

192

95

56CB1N56CB2N56CB3N56EL2N56EL4N56EL2

56AI532

56AI55056AI540

SHOWN HERE FLATACTUALLY ANGLED,

REPRESENTATIONFOR PICTORIAL

TERMINALS ARE

56AI450

56AI43256AI440

REAR MECHANISMS

L1

E

L3

L2

REAR MECHANISMS

L3L1 N

E

L2

63


140165

CUT-OUT

CUT-OUT

1 x M32

1 x M25

40

50

50

30

75

5555 22

198


FRONT COMPLETE

204

ENTRYCONDUIT1 x M32

101


DIN RAIL BRACKETPROVIDED WITH KIT

80

157

254

56FWL


198

63

80


165 140

50

50

5555

75

CUT-OUT

CUT-OUT1 x M25

1 x M32

1 x M25CONDUIT ENTRY

CONDUIT ENTRY1 x M25


50

140165

56WL

CUT-OUT1 x M32

CUT-OUT1 x M25

5555

50

75

FRONT COMPLETESIDE COMPLETE

22CONDUIT

91

1 x M25CONDUITENTRY

ENTRY

198 204

63 1 x M25

MOUNTING PLATE FOR 56FLW

110

90

240

140

8.4

22

101

204

MOUNTING PLATE GASKETLENS

22

22

215190

83

E

REAR MECHANISMS

N

L

A


235260 70 45

40

50

CUT-OUT1 x M25

1 x M32CUT-OUT

55

50

75

CUT-OUT1 x M25


300

30

100

2 x M25CONDUIT

ENTRIES

30

63

ENTRY

CONDUITCONDUIT

294

101

1 x M25

56CTC

43

37

36

56CTC15

LOOP2 WAY1 WAYCOMMON

NA

E

REAR MECHANISMS

N

N

E

A

ASWITCHES ARE 30 SERIES MECH

L

A

N E

N

E

MOTORTIMER

1OFF

2

COMMON

MOTOR

OVERRIDEMANUAL

A

AUTOMATICT 1

C

56CTC SERIES WIRING IDENTIFICATION

C

1ON/OFF

C

1

2L C

2L

1

TIMECONTACTS

POWERINPUT

SOCKET OUTLET

2

1

C L2

1

LC

CABLEINCOMING

TERMINALS

84


56CTC2S01556CTC2S0

CUT-OUT1 x M25

165 140

CUT-OUT1 x M40

FRONT COMPLETE REAR MECHANISMS

E L

N A

E

N

L

A

37

22

172

50

22

CUT-OUT

CUT-OUT1 x M25

50

1 x M32

42

152

18

100

SIDE COMPLETE

43

CONDUIT

ENTRIES

2 x M25

63

ENTRIES

CONDUITCONDUIT2 x M20

198

198204

1

C

2L

1

C

2L

REFER TO 56CTC , 56CTC15 WIRING DIAGRAM

85


260 235 70

FRONT COMPLETE

SIDE COMPLETE

20

100

REAR MECHANISMS

ENTRIES

CONDUIT2 x M25

300

20

63

CONDUITCONDUIT

ENTRIES

2 x M25

294

N

E

A

L

2 x M25CUT-OUTS

2 x M40CUT-OUTS

2 x M32CUT-OUTS

22

172

42

152

56CTCT15056CTCT150/1256CTCT150/24

LOW VOLTAGE TERMINALS

EXTRA LOW VOLTAGE TERMINALS

REFER TO 56CTC , 56CTC15 WIRING DIAGRAM

198

1

2L

C C

1

2L

86


56T15056T150/12


40

45260 235 70

50

30

96

1 x M25CUT-OUT

CUT-OUT1 x M32

55

75

1 x M25CUT-OUT

50

30

63

CONDUIT

ENTRIES

2 x M25

300 294

101ENTRY

CONDUITCONDUIT1 x M25

56T150/24

TERMINALSLOW VOLTAGE

TERMINALSEXTRA LOW VOLTAGE

TRANSFORMER

87

FRONT COMPLETE

ENTRIES

CONDUIT2 x M25

300 294


2 x M25CONDUITCONDUIT

ENTRIES

152

42

CUT-OUTS

CUT-OUTS

2 x M40

2 x M32

SIDE COMPLETE

96

22

260 235 70

22

CUT-OUTS2 x M25

172

22

63

56T150/256T150/12/256T150/24/2

TERMINALS1 x LOW VOLTAGE

TERMINALS2 x EXTRA LOW VOLTAGE

198

TRANSFORMER

88


CUT-OUTS

SIDE COMPLETE


1 x M20/25

50

40

18

1 x M25CONDUITENTRY74

45

38

18


70 45

CUT-OUT1 x M25/32

40

50

5555

74

SIDE COMPLETE

30

63

22

CONDUITENTRIES

2 x M25

CONDUITENTRY

1 x M32

63


40

165 140

5555

75

50

30

50

CUT-OUT

1 x M25CUT-OUT

1 x M32

22


1 x M32CONDUITENTRY

ENTRYCONDUIT1x M40


140165

50

1 x M25CUT-OUT

1 x M32CUT-OUT

5555

50

75

45

45

1001x M40CONDUITENTRY

101107

107 101

204 198

198204

FRONT

FRONT

FRONT

FRONT

ONE 56B BRIDGE PROVIDED


101

101

101

101

56E1

56ES1

56E2

56ED2

89

18

18


140

40

50

2 x M20/25CUT-OUTS

50

74

SIDE COMPLETE

38

2 x M20

ENTRIESCONDUIT

ENTRYCONDUIT1 x M25

SIDE COMPLETE

105

30

CONDUIT2 x M25

ENTRIES

22

63

ENTRIES

1 x M32CONDUIT

FRONT COMPLETE

101


40

165 140

5555

75

50

50

CUT-OUT

1 x M25CUT-OUT

1 x M32

204198

1 x M32


40

70260 235 45

50

SIDE COMPLETE

30

CUT-OUT1 x M25

CUT-OUT

55

75

22

CUT-OUT1 x M25

50

63

CONDUITENTRIES

2 x M25

ENTRYCONDUIT1 x M32

198204

294300


FRONT

TWO 56B BRIDGES PROVIDED

FRONT

101

101

10156ES2

56E2/4EL

56E3

COMPLETE WITH DIN RAILTO SUIT 4EL RCD’S

90


CUT-OUT1 x M25

165 140

CUT-OUT1 x M40

22

172

5022

CUT-OUT

CUT-OUT1 x M25

50

1 x M32

42

152

22

SIDE COMPLETE

63

198204

2 x M32

ENTRIESCONDUIT


56E4

397


CUT-OUT

CUT-OUT

1 x M25CUT-OUT

1 x M32

50

7555

1 x M40

50

SIDE COMPLETE

30

391

1 x M32

ENTRYCONDUIT

63

30


1 x M25CUT-OUT

40

28165333358 97

56E4VH

FRONT

TWO 56B BRIDGES AND TWO 56DV DIVIDERS PROVIDED

ONE 56DV DIVIDER PROVIDEDTWO 56B BRIDGES AND

FRONT

101

198

91

AB

AB

AB

AB

C C

22

D

18

E

F

F

22

FRONT

18

DE

FRONT

CC

G H I G

IHGH

I H G H

GHIG

G G

H

I

GG

H

I

H H

II

G G IGH

G G

HGI

CatalogueNumber Gangs

No. A B C DDimensions(mm)

E FConduit Entries

G H ICut Out Provisions

Dividers56 DV

Bridges56B

PointsMounting

56E656E856E956E16 16

89

6

392

392294

294

398

398300

300

392

198294

198

63

6363

63

2 x M25

2 x M253 x M25

2 x M25

2 x M32

2 x M323 x M32

2 x M32

25

2525

25

32

3232

32

12

66

4

8

46

3

48

2828

2440

4040

40

56E6 56E9

56E1656E8

93


103

270

110

38

38

63

30

215

40

75

320

2 x M32/40CUT-OUTS

2 x M32CONDUIT ENTRIES

CONDUIT 1 x M40

ENTRIES

66CV45066CV46366CV55066CV56366CV75066CV763

160

FRONT COMPLETE

ION

0OFF

94

66P450

116 74

260

30

67

66CV. (CONT)

L3

T3

CONDUCTOR TERMINATIONSWITCH IS SIDE WIRED

SWITCH IS MOUNTED

IS PRESSURE PLATE TYPE

MECHANISM

SWITCH IS MOUNTED

SWITCH IS SIDE WIREDCONDUCTOR TERMINATIONIS PRESSURE PLATE TYPE

66CV46366CV450

ON BACK PLATE

L1

L2

L3

L1

E

L3

E

L2

66CV56366CV550

L1

L3

L2

ON BACK PLATE

n

L2

L1

L3

E

MECHANISM

NL1

E

L2

L3

PE

PE

T1 T2

L1 L2

T3

L3

PE

PE

T2T1

L2L1

SWITCH IS SIDE WIREDCONDUCTOR TERMINATIONIS PRESSURE PLATE TYPE

66CV76366CV750

n

L1

L2

L3

ON BACK PLATESWITCH IS MOUNTED

n

L1

L2

L3

C1

MECHANISM

L1

E

C2

N

E

L2

L3TERMINALS ARE

FOR PICTORIAL REPRESENTATION

ACTUALLY ANGLED,SHOWN HERE FLAT

n

L2

L1

L3

N

N

PE T1

PE L1

T2 T3

L2 L3

N

N

66P46366P55066P56366P75066P763

95

INTERNATIONAL PROTECTION RATINGS

No test applied

No test applied

No specific protection.

Protected against solid objects larger than 50mm

(eg. accidental contact with hand).

Inherent degree of protection.

Protected against solid objects larger than 12mm (eg. contact with finger).

Protected against solid objects larger than 2.5mm

(eg. tools and wires).

Protected against solid objects larger than 1mm (eg. fine tools and wires).

Protected against dust. Prevent entry in sufficient quantity to interfere with satisfactory operation.

Completely protected against dust.

TEST PROTECTION

X

0

1

2

3

4

5

6

Defined byIEC 529DIN 40050CEI 70-1

To Australian Standards AS 1939 - 1991 'Classification of degrees of Protection' Provided

by enclosures for electrical equipment.

Protection against contact of external solids

No test applied No specific protection.

Resistant to impacts of weight up to 150g falling

from 15cm.


from 20cm.


from 40cm.

Resistant to impacts of weight up to 1.5kg falling

from 40cm.

Resistant to impacts of weight up to 5kg falling

from 40cm.

TEST PROTECTION

X

1

3

5

7

9

Defined byUTE 20010

Mechanical protection against impact

No test applied

No test applied

No specific protection.

Inherent degree of protection.

Protected against drops of water falling vertically.

Protected against drops of water falling at up to 15°

from the vertical.

Protected against spraying water at up to 60° from

the vertical.

Protected against splashing water from all

directions.

Protected against jets of water from all directions.

Protected against jets of water of similar force to

heavy seas.

Protected against the effects of immersion.

Protected against the effects of submersion.

TEST PROTECTION

X

0

1

2

3

4

5

6

7

8

Defined byIEC 529

Protection against the penetration of liquids

96

The following technicalterms are brief descriptionsindicating the tests involved toattain ratings. For furtherinformation refer to the stan-dards indicated.

M-Rating (Refer AS 3133)Clipsal switches and switched

socket outlets are marked with anM-Rating. This indicates that theseproducts have been tested and foundsuitable for switching locked rotorcurrent.

In part, this test involves 50operations, make and break of thenominated locked rotor current at 0.5power factor lagging. The switch will notfail to interrupt the current or fail in anyway electrically or mechanically.

AC-21 (refer AS 3947)Switching of resistive loads,

including moderate overloadsIn part this involves 5 make and

break operations, at 11/2 times ratedcurrent and 1.1 times rated voltage at0.95 cos.

Additional mechanical no load andelectrical endurance tests at ratedcurrent and voltage at 0.95 cos areconducted.

AC-22 (refer AS 3947)Switching of mixed resistive and

inductive loads, including moderateoverloads.

In part this involves 5 make andbreak operations at 3 times ratedcurrent and 1.1 times rated voltage at0.65 cos.

Additional mechanical no load andelectrical endurance tests at ratedcurrent and voltage at 0.65 cos.

TECHNICAL TERMS

AC-23 (refer AS 3947)Switching of motor loads or highly

inductive loads.In part this involves 5 make and

break operations at:10 times rated current make.1.1 times rated voltage make.0.35 cos.8 times rated current break.1.1 times rated voltage break.0.35 cos.Additional mechanical at no load and

electrical endurance tests at ratedcurrent and voltage at 0.35 cos areconducted.

AC-15 (refer AS 3947)Control of electromagnetic loads

(>72VA).

97

Cable size No. and diameter Overall diameter- nominal area of wires for of AS 3000 of conductor standard conductor table E7

mm2 No./mm m m

0.5 1/0.80 2.51 1/1.13 2.91.5 1/1.38 3.2

7/0.50 3.32.5 1/1.78 3.6

7/0.67 3.84 7/0.85 4.86 7/1.04 5.3

10 7/1.35 6.316 7/1.70 7.325 19/1.35 9.435 19/1.53 10.450 19/1.78 12.070 19/2.14 13.895 37/1.78 16

120 37/2.03 17.7150 37/2.25 19.7185 37/2.52 22240 61/2.25 25.1300 61/2.52 27.9400 61/2.85 31.4500 61/3.20 34.9630 127/2.52 38.9

Measure Symbol Unit

Length S mArea A m2

Volume V m3

Weight m kgDensity P kg/m3

Time t sFrequency F H zRotary Speed n s-1

Linear Speed v ms-1

Acceleration a ms-2

Power F N (Newton)Pressure P Pa (Pascal)Torque M NmWork W J (Joule)Power P W (Watt)Reactive Voltampere VarVoltampere V.ACurrent I A (Ampere)Operational Current Ith AConventional Enclosed Ithe AThermal CurrentVoltage U V (Volts)Insulated Voltage Ui VOperational Voltage Ue VResistance R (Ohm)Impedance ZReactance XReluctance S A/WbCapacitance C F (Farad)Quantity of Electricity Q C (Coulomb)Magnetic Field Strength H A/mMagnetic Flux Ø Wb (Weber)Inductance L H (Henry)Magnetic Flux Density B T (Tesca)Temperature t OC (Centigrade)Illuminance E l x (Lux)Luminance L cd/m2

Luminous Flux Ø lm (Lumen)Luminous Intensity I cd (Candela)

Dimensions, standard copper and aluminium conductors1 core 0.6/1kV PVC insulated cable to AS 3147, 75oCNote: For exact dimensions refer to manufacturers’ details.

TECHNICAL TABLES

kW = Line Amps x Line Volts x 1.732 x P.F. 1000

kVA = Line Amps x Line Volts x 1.7321000

kW = kV.A x P.F.

Abbreviations for Multiples and Sub Multiples

T tera 1012

G giga 109

M mega 106

k kilo 103

d deci 10-1

c centi 10-2

m milli 10-3

u micro 10-6

n nano 10-9

p pico 10-12

ABBREVIATIONS

USEFUL 3-PHASE FORMULAE

Electric Motors

Power Output = Power Input x Efficiency

kW Output = kW Input x Efficiency

kW Output = 1.732 x Line Volts x Line Amps x P.F. x Efficiency 1000

kV.A Input = 1.732 x Line Volts x Line Amps1000

Line Amperes = 1000 x kW OutputLine Volts x 1.732 x P.F. x Efficiency

Line Amperes = 1000 x kV.A InputLine Volts x 1.732

The Power Factor is usually taken as 0.8 (as an all-round figure)but this varies with the speed and size of the motor.The efficiency varies from 85% in small motors to 90% and overfor large motors.

98

Quality Non-SI Unit Metric Conversion Factors Metric (SI) to(Approximate) Non-SI Non-SI UnitsTo Metric (SI) Units

Length Inch (in) Millimetre (mm) or 1 in = 25.4mm 1 cm = 0.39 inCentimetre (cm)

Foot (ft) Centimetre (cm) or 1 ft = 30.5 cm 1 m = 3.28 ftMetre (m)

Yard (yd) Metre (m) 1 yd = 0.914 m 1 m = 1.09 ydMile Kilometre (km) 1 mile = 1.61 km 1 km = 0.62 mile

Area Square Inch (in2) Square Millimetre (mm2) 1 in2 = 645 mm2 1 mm2 = 0.002 in2

Square Inch (in2) Square Centimetre (cm2) 1 in2 = 6.45 cm2 1cm2 = 0.155 in2

Square Foot (ft2) Square Centimetre (cm2) 1 ft2 = 929 cm2 1 m2 = 10.76 ft2

or Square Metre (m2)Square Yard (yd2) Square Metre (m2) 1 yd2 = 0.836m2 1 m2 = 1.20 yd2

Acre Hectare (ha) 1 acre = 0.405 ha 1 ha = 2.47 acresSquare Mile Square Kilometre (km2) 1 Square Mile = 2.59 km2 1 km2 = 0.387 sq. mile

Volume Cubic Inch (in3) Cubic Centimetre (cm3) 1 in3 = 16.4 cm3 1 cm3 = 0.06 in3

Cubic Inch (ft3) Cubic Decimetre (dm3) or 1 ft3 = 28.3 dm3 1 m3+ = 35.3 ft3

Cubic Yard (yd3) Cubic Metre (m3) 1 yd3 = 0.765m3 1 m3 = 1.31 yd3

Volume Fluid Once UK (fl. oz UK) Millilitre (ml) 1 fl. oz (UK) = 28.4 ml 1 ml = 0.035 fl. oz (UK)(Fluids) Pint UK (pt UK) Millilitre (ml) or Litre (l) 1 pint UK = 568 ml 1 l = 1.76 pint (UK)

Gallon UK (gal UK) Litre (l) or Cubic Metre (m3) 1 gal UK = 4.55 l 1 m3 = 220 gallons (UK)Fluid Once US (Fl. oz US) Millilitre (ml) 1 fl. oz (US) = 29.6 ml 1 ml = 0.034 fl. oz (US)Pint US (gal US) Litre (l) or Millilitre 1 pint (US) = 473 ml 1 l = 2.11 pint (US)Gallon US (gal US) Litre 1 gallon (US) = 3.79 l 1 l = 0.264 gallon (US)

Mass Ounce (oz) Gram (g) 1 oz = 28.3 g 1 g = 0.035 ozPound (lb) Gram (g) or kilogram (kg) 1 lb = 454 g 1 kg = 2.20 lbTon Tonne (t) 1 ton = 1.02 tonne 1 tonne = 0.984 tontael Gram (g) 1 tael= 37.8 g 1 g = 0.026 taelCatty Kilogram (kg) 1 catty = 0.605 kg 1 kg = 1.65 cattoesPicul Kilogram (kg) 1 picul = 60.50 kg 1 kg = 0.017 picul

Force Pound Force (lbf) Newton (N) 1 lbf = 4.45 N 1 N = 0.225 lbfKilogram Force (kgf) Newton (N) 1 kgf = 9.81 N 1 N = 0.102 kgf

Pressure Pound Force per square kilopascal (kPa) 1 psi = 6.86 kPa 1 kPa = 0.145 psiinch (psi)Kilogram force per kilopascal (kpa) 1 kgf/cm2 = 98 kPa 1 kPa = 0.01 kgf/cm2

square centimetre (kgf/cm2)Inch of water (in H2O) Pascal (Pa) 1 in H2O = 249 Pa 1 Pa = 0.004 in H2OBar kilopascal (kPa) 1 Bar = 100 kPa 1 kPA = 0.01 bar

Velocity Mile per hour (mph) Kilometre per hour (km/h) 1 mile = 1.61 km/h 1 km/h = 0.62 mph

Temperature Fahrenheit temp. (F) Celsius temp. (C) oC = 5 (oF - 32) oF = (9 x oC) + 32 9 5

Density Pound per cubic inch Gram per cubic 1 lb/in3 = 27.7 t/m3 1 t/m3 = 0.036 lb/in3

(lb/in3) centimetre (g/cm3)= tonne per cubic metre (t/m3)

Pound per cubic foot Kilogram per cubic metre 1 lb/ft3 = 16.02 kg/m3 1 kg/m3 = 0.06 lb/ft3

(lb/ft3+) (kg/m3)Ton per cubic yard Tonne per cubic metre (t/m3) 1 ton/yd = 1.33 t/m3 1 t/m3 = 0.752 ton/yd3

(ton/yd3)

Energy British thermal unit (Btu) Kilojoule (kJ) 1 Btu = 1.06 kJ 1 kJ = 0.948 BtuTherm Megajoule (MJ) 1 Therm =106 MJ 1 MJ = 9.48 x 10-3 thermCalorie (dietician) Kilojoule (kJ) 1 Cal (dietician) = 4 kJ 1 kJ = 0.23 Cal (dietician)

Power Horsepower (hp) Kilowatt (kW) 1 hp = 0.746 kW 1 kW = 1.34 hp

Fuel Mile per gallon (mpg) Litres per 100 m (n) x mpg = 2821/100 km (n) x 1/100 km = 282Consumption n n

COMMON CONVERSION FACTORS

99

Catalogue Product IllustrationNumber Description

NUMERICAL INDEX

56/01/1 ............................................................................... 41 ...................................................... 7356/01X ................................................................................ 41 ...................................................... 7356/2PB ................................................................................ 22 ...................................................... 7256/2PBS1 ........................................................................ 22 ...................................................... 7256/32 .................................................................................... 40 ...................................................... 7356AI310 ............................................................................. 18 ...................................................... 7656AI315 ............................................................................. 18 ...................................................... 7656AI410 ............................................................................. 18 ...................................................... 7656AI420 ............................................................................. 18 ...................................................... 7656AI432 ............................................................................. 18 ...................................................... 7756AI440 ............................................................................. 18 ...................................................... 7756AI450 ............................................................................. 18 ...................................................... 7756AI510 ............................................................................. 18 ...................................................... 7656AI520 ............................................................................. 18 ...................................................... 7656AI532 ............................................................................. 18 ...................................................... 7756AI540 ............................................................................. 18 ...................................................... 7756AI550 ............................................................................. 18 ...................................................... 7756B ......................................................................................... 38 .............................................................

56C210 .............................................................................. 12 ...................................................... 5056C215/32 ..................................................................... 12 ...................................................... 5056C3/110 ......................................................................... 12 ...................................................... 5056C310L .......................................................................... 12 ...................................................... 5056C310RP ..................................................................... 12 ...................................................... 5056C310HD ..................................................................... 12 ...................................................... 5056C310 .............................................................................. 12 ...................................................... 5056C310RC ..................................................................... 34 ...................................................... 5656C310D ......................................................................... 12 ...................................................... 5056C310EL2P ............................................................... 35 .............................................................

56C315 .............................................................................. 12 ...................................................... 5056C315RC ..................................................................... 34 ...................................................... 5656C315D ......................................................................... 12 ...................................................... 5056C315ELP .................................................................. 31 .............................................................

56C315HD ..................................................................... 12 ...................................................... 5056C320 .............................................................................. 12 ...................................................... 5156C332 .............................................................................. 12 ...................................................... 5256C410 .............................................................................. 12 ...................................................... 5156C410RC ..................................................................... 34 ...................................................... 5756C416K .......................................................................... 12 ...................................................... 5156C420 .............................................................................. 12 ...................................................... 5156C420RC ..................................................................... 34 ...................................................... 5756C420ELP .................................................................. 31 .............................................................

56C432 .............................................................................. 12 ...................................................... 5256C432RC ..................................................................... 34 ...................................................... 5656C440 .............................................................................. 12 ...................................................... 5256C440RC ..................................................................... 34 ...................................................... 5456C450 .............................................................................. 12 ...................................................... 5256C510 .............................................................................. 12 ...................................................... 5156C510RC ..................................................................... 34 ...................................................... 5656C520 .............................................................................. 12 ...................................................... 5156C520RC ..................................................................... 34 ...................................................... 5656C532 .............................................................................. 12 ...................................................... 5256C532RC ..................................................................... 34 ...................................................... 5656C540 .............................................................................. 12 ...................................................... 5256C540RC ..................................................................... 34 ...................................................... 5656C550 .............................................................................. 12 ...................................................... 5256C610 .............................................................................. 12 ...................................................... 5156C710 .............................................................................. 12 ...................................................... 5156C720 .............................................................................. 12 ...................................................... 5156CB1N ............................................................................ 39 ...................................................... 7756CB2N ............................................................................ 39 ...................................................... 7756CB3N ............................................................................ 39 ...................................................... 7756CSC310 ..................................................................... 32 .............................................................

56CSC315 ..................................................................... 32 .............................................................

56CSC410 ..................................................................... 32 .............................................................

56CSC420 ..................................................................... 32 .............................................................

56CSC432 ..................................................................... 32 .............................................................


56CSC440 ..................................................................... 32 .............................................................

56CSC450 ..................................................................... 32 .............................................................

56CSC510 ..................................................................... 32 .............................................................

56CSC520 ..................................................................... 32 .............................................................

56CSC532 ..................................................................... 32 .............................................................

56CSC540 ..................................................................... 32 .............................................................

56CSC550 ..................................................................... 32 .............................................................

56CTC ................................................................................ 36 ...................................................... 8356CTC2SO ................................................................... 36 ...................................................... 8456CTC2SO15 ............................................................ 36 ...................................................... 8456CTC15 ......................................................................... 36 ...................................................... 8356CTCT150 ................................................................. 36 ...................................................... 8556CTCT150/12 ........................................................ 36 ...................................................... 8556CTCT150/24 ........................................................ 36 ...................................................... 8556CV310 .......................................................................... 12 ...................................................... 5356CV310HD ................................................................. 12 ...................................................... 5356CV315 .......................................................................... 12 ...................................................... 5356CV315HD ................................................................. 12 ...................................................... 5356CV410 .......................................................................... 12 ...................................................... 5456CV416K ...................................................................... 12 ...................................................... 5456CV420 .......................................................................... 12 ...................................................... 54256CV432 ...................................................................... 12 ...................................................... 5556CV440 .......................................................................... 12 ...................................................... 5556CV450 .......................................................................... 12 ...................................................... 5556CV510 .......................................................................... 12 ...................................................... 5456CV520 .......................................................................... 12 ...................................................... 5456CV532 .......................................................................... 12 ...................................................... 5556CV540 .......................................................................... 12 ...................................................... 5556CV550 .......................................................................... 12 ...................................................... 5556CV610 .......................................................................... 12 ...................................................... 5356CV710 .......................................................................... 12 ...................................................... 5356CV720 .......................................................................... 12 ...................................................... 5356DB2 ................................................................................. 40 ...................................................... 9256D ........................................................................................ 28 .............................................................

56DB3 ................................................................................. 40 ...................................................... 9256DB4 ................................................................................. 40 ...................................................... 9256XDB4 ............................................................................. 40 ...................................................... 9256DB6 ................................................................................. 40 ...................................................... 9256XDB6 ............................................................................. 40 ...................................................... 9256DB9 ................................................................................. 40 ...................................................... 9256DV ..................................................................................... 38 .............................................................

56EI ....................................................................................... 38 ...................................................... 8856E2 ..................................................................................... 38 ...................................................... 8856E2/4EL ......................................................................... 38 ...................................................... 8956E3 ..................................................................................... 38 ...................................................... 8956E4 ..................................................................................... 38 ...................................................... 9056E4VH ............................................................................. 38 ...................................................... 9056E6 ..................................................................................... 38 ...................................................... 9156E8 ..................................................................................... 38 ...................................................... 9156E8SB ............................................................................. 38 .............................................................

56E9 ..................................................................................... 38 ...................................................... 9156E9SB ............................................................................. 38 .............................................................

56E16 .................................................................................. 38 ...................................................... 9156ED2 ................................................................................. 38 ...................................................... 8856EL2 .................................................................................. 39 ...................................................... 7756EL2N ............................................................................. 39 ...................................................... 7756EL4N ............................................................................. 39 ...................................................... 7756ES1 ................................................................................. 38 ...................................................... 8856ES2 ................................................................................. 38 ...................................................... 8956FA1 .................................................................................. 41 .............................................................

56FA1B .............................................................................. 41 .............................................................

56FA2 .................................................................................. 41 .............................................................

56FA2B .............................................................................. 41 .............................................................

56FA3 .................................................................................. 41 .............................................................

56FA3B .............................................................................. 41 .............................................................

56FA4 .................................................................................. 41 .............................................................

100


56FA4B .............................................................................. 41 .............................................................

56FWL ................................................................................ 37 ...................................................... 8056HPG1 ........................................................................... 33 .............................................................

56HPG2/1 ...................................................................... 33 .............................................................

56HPG2/2 ...................................................................... 33 .............................................................

56JB1 .................................................................................. 40 ...................................................... 9256JB2 .................................................................................. 40 ...................................................... 9256JB3 .................................................................................. 40 ...................................................... 9256JB4 .................................................................................. 40 ...................................................... 9256JB1SWA ..................................................................... 43 .............................................................

56K1SW115 ................................................................. 24 ...................................................... 7156K1SW115HS ........................................................ 24 ...................................................... 7156K1SW115MS ........................................................ 24 ...................................................... 7156K1SW120 ................................................................. 24 ...................................................... 7056K1SW132 ................................................................. 24 ...................................................... 7056K1SW132HS ........................................................ 24 ...................................................... 7056K1SW132MS ........................................................ 24 ...................................................... 7056K1SW150 ................................................................. 24 ...................................................... 7056K1SW220 ................................................................. 24 ...................................................... 7056K1SW232 ................................................................. 24 ...................................................... 7056K1SW250 ................................................................. 21 ...................................................... 7056K1SW310 ................................................................. 24 ...................................................... 7056K1SW310HS ........................................................ 24 ...................................................... 7056K1SW310MS ........................................................ 24 ...................................................... 7056K1SW320 ................................................................. 24 ...................................................... 7056K1SW332 ................................................................. 24 ...................................................... 7056K1SW350 ................................................................. 24 ...................................................... 7056K2SW115 ................................................................. 24 ...................................................... 7156K2SW115MS ........................................................ 24 ...................................................... 7156K2SW120 ................................................................. 24 ...................................................... 7056K2SW132 ................................................................. 24 ...................................................... 7056K2SW132MS ........................................................ 24 ...................................................... 7056K2SW150 ................................................................. 24 ...................................................... 7056K2SW220 ................................................................. 24 ...................................................... 7056K2SW232 ................................................................. 24 ...................................................... 7056K2SW250 ................................................................. 24 ...................................................... 7056K2SW310 ................................................................. 24 ...................................................... 7056K2SW310MS ........................................................ 24 ...................................................... 7056K2SW320 ................................................................. 24 ...................................................... 7056K2SW332 ................................................................. 24 ...................................................... 7056K2SW350 ................................................................. 24 ...................................................... 7056L1 ...................................................................................... 39 .............................................................

56L1/22 ............................................................................. 39 .............................................................

56L1/22/2 ........................................................................ 39 .............................................................

56L1/30 ............................................................................. 39 .............................................................

56L1/30/2 ........................................................................ 39 .............................................................

56L2 ...................................................................................... 39 .............................................................

56L3 ...................................................................................... 39 .............................................................

56L4 ...................................................................................... 39 .............................................................

56LK ..................................................................................... 28 .............................................................

56MF .................................................................................... 28 ...................................................... 7156MS .................................................................................... 38 .............................................................

56P210 .............................................................................. 29 ...................................................... 8156P215/32 ...................................................................... 29 ...................................................... 8156P3/110 ......................................................................... 29 ...................................................... 8156P310L ........................................................................... 29 ...................................................... 8156P310RP ...................................................................... 29 ...................................................... 8156P310F16 ................................................................... 31 .............................................................

56P310 .............................................................................. 29 ...................................................... 8156P313 .............................................................................. 31 .............................................................

56P315RP ...................................................................... 31 .............................................................

56P315 .............................................................................. 29 ...................................................... 8156P316RP ...................................................................... 31 .............................................................

56P320 .............................................................................. 29 ...................................................... 8156P320F .......................................................................... 29 ...................................................... 8156P410 .............................................................................. 29 ...................................................... 81

56P410G ......................................................................... 30 .............................................................

56P416K .......................................................................... 29 ...................................................... 8156P420 .............................................................................. 29 ...................................................... 8156P420G ......................................................................... 30 .............................................................

56P432 .............................................................................. 29 ...................................................... 8156P440 .............................................................................. 29 ...................................................... 8156P450 .............................................................................. 29 ...................................................... 8156P510 .............................................................................. 29 ...................................................... 8156P510G ......................................................................... 30 .............................................................

56P520 .............................................................................. 29 ...................................................... 8156P520G ......................................................................... 30 .............................................................

56P532 .............................................................................. 29 ...................................................... 8156P540 .............................................................................. 29 ...................................................... 8156P550 .............................................................................. 29 ...................................................... 8156P610 .............................................................................. 29 ...................................................... 8156P710 .............................................................................. 29 ...................................................... 8156P720 .............................................................................. 29 ...................................................... 8156PA310F16 ................................................................ 31 .............................................................

56PA313 ........................................................................... 31 .............................................................

56PA315RP .................................................................. 31 .............................................................

56PA316RP .................................................................. 31 .............................................................

56PA320 ........................................................................... 29 ...................................................... 8156PA332 ........................................................................... 29 ...................................................... 8156PA410 ........................................................................... 29 ...................................................... 8156PA410G ...................................................................... 30 .............................................................

56PA416K ....................................................................... 29 ...................................................... 8156PA415KG .................................................................. 30 .............................................................

56PA420 ........................................................................... 29 ...................................................... 8156PA420G ...................................................................... 30 .............................................................

56PA432 ........................................................................... 29 ...................................................... 8156PA432G ...................................................................... 30 .............................................................

56PA440 ........................................................................... 29 ...................................................... 8156PA440G ...................................................................... 30 .............................................................

56PA450 ........................................................................... 29 ...................................................... 8156PA450G ...................................................................... 30 .............................................................

56PA510 ........................................................................... 29 ...................................................... 8156PA510G ...................................................................... 30 .............................................................

56PA520 ........................................................................... 29 ...................................................... 8156PA520G ...................................................................... 30 .............................................................

56PA532 ........................................................................... 29 ...................................................... 8156PA532G ...................................................................... 30 .............................................................

56PA540 ........................................................................... 29 ...................................................... 8156PA540G ...................................................................... 30 .............................................................

56PA550 ........................................................................... 29 ...................................................... 8156PA550G ...................................................................... 30 .............................................................

56PA610 ........................................................................... 29 ...................................................... 8156PA610G ...................................................................... 30 .............................................................

56PA710 ........................................................................... 29 ...................................................... 8156PA710G ...................................................................... 30 .............................................................

56PA720 ........................................................................... 29 ...................................................... 8156PA720G ...................................................................... 30 .............................................................

56PB ..................................................................................... 22 ...................................................... 7256PBS ................................................................................. 22 ...................................................... 7256PBS1 ............................................................................. 22 ...................................................... 7256PBS2 ............................................................................. 22 ...................................................... 7256PC .................................................................................... 30 .............................................................

56PCI .................................................................................. 30 .............................................................

56PC2 ................................................................................. 30 .............................................................

56PMK ......................................................................................................................................................

56PO410 ......................................................................... 33 ...................................................... 8256PO420 ......................................................................... 33 ...................................................... 8256PO432 ......................................................................... 33 ...................................................... 8256PO440 ......................................................................... 33 ...................................................... 8256PO450 ......................................................................... 33 ...................................................... 8256PO510 ......................................................................... 33 ...................................................... 8256PO520 ......................................................................... 33 ...................................................... 82


101



56PO532 ......................................................................... 33 ...................................................... 8256PO540 ......................................................................... 33 ...................................................... 8256PO550 ......................................................................... 33 ...................................................... 8256POK ................................................................................ 32 ...................................................... 8256POKI .............................................................................. 32 ...................................................... 8256RC .................................................................................... 34 ...................................................... 5356RC4N ........................................................................... 39 ...................................................... 7856SB4 ................................................................................. 42 ...................................................... 7856SB13 .............................................................................. 42 ...................................................... 7956SC2 ................................................................................. 30 .............................................................

56SC310RC ................................................................. 34 ...................................................... 5956SC315RC ................................................................. 34 ...................................................... 5956SC410RC ................................................................. 34 ...................................................... 6056SC420RC ................................................................. 34 ...................................................... 6056SC432RC ................................................................. 34 ...................................................... 6156SC440RC ................................................................. 34 ...................................................... 6156SC510RC ................................................................. 34 ...................................................... 6056SC520RC ................................................................. 34 ...................................................... 6056SC532RC ................................................................. 34 ...................................................... 6156SC540RC ................................................................. 34 ...................................................... 6156SO210 ......................................................................... 14 ...................................................... 6256SO210/16 ................................................................. 17 .............................................................

56SO215/32 ................................................................. 14 ...................................................... 6256SO3/110 .................................................................... 14 ...................................................... 6256SO310 ......................................................................... 14 ...................................................... 6256SO310A ..................................................................... 14 ...................................................... 6256SO310C ..................................................................... 17 .............................................................

56SO310F16 .............................................................. 17 .............................................................

56SO310/16 ................................................................. 17 .............................................................

56SO310L ...................................................................... 14 ...................................................... 6256SO313 ......................................................................... 17 .............................................................

56SO315RP ................................................................. 17 .............................................................

56SO315 ......................................................................... 14 ...................................................... 6256SO310RP ................................................................. 14 ...................................................... 6256SO315A ..................................................................... 14 ...................................................... 6256SO316RP ................................................................. 17 .............................................................

56SO316/4 .................................................................... 15 .............................................................

56SO316/6 .................................................................... 15 .............................................................

56SO316/6/44 ........................................................... 16 .............................................................

56SO316/6/67 ........................................................... 16 .............................................................

56SO320 ......................................................................... 14 ...................................................... 6356SO320F ..................................................................... 14 ...................................................... 6256SO320G .................................................................... 18 .............................................................

56SO332 ......................................................................... 14 ...................................................... 6356SO332G .................................................................... 18 .............................................................

56SO332/4 .................................................................... 15 .............................................................

56SO332/6 .................................................................... 15 .............................................................

56SO332/6/44 ........................................................... 16 .............................................................

56SO332/6/67 ........................................................... 16 .............................................................

56SO410 ......................................................................... 14 ...................................................... 6356SO410G .................................................................... 18 .............................................................

56SO416K ..................................................................... 14 ...................................................... 6356SO416KG ................................................................ 18 .............................................................

56SO416/6 .................................................................... 15 .............................................................

56SO416/6/44 ........................................................... 16 .............................................................

56SO416/6/67 ........................................................... 16 .............................................................

56SO420 ......................................................................... 14 ...................................................... 6356SO420G .................................................................... 18 .............................................................

56SO432 ......................................................................... 14 ...................................................... 6356SO432G .................................................................... 18 .............................................................

56SO432/6 .................................................................... 15 .............................................................

56SO432/3/67 ........................................................... 16 .............................................................

56SO432/6/44 ........................................................... 16 .............................................................

56SO432/6/67 ........................................................... 16 .............................................................

56SO440 ......................................................................... 14 ...................................................... 6356SO440G .................................................................... 18 .............................................................

56SO450 ......................................................................... 14 ...................................................... 6356SO450G .................................................................... 18 .............................................................

256SO4ELP15 .......................................................... 35 .............................................................

56SO510 ......................................................................... 14 ...................................................... 6356SO510G .................................................................... 18 .............................................................

56SO516/6 .................................................................... 15 .............................................................

56SO516/6/44 ........................................................... 16 .............................................................

56SO516/6/67 ........................................................... 16 .............................................................

56SO520 ......................................................................... 14 ...................................................... 6356SO520G .................................................................... 18 .............................................................

56SO532 ......................................................................... 14 ...................................................... 6356SO532G .................................................................... 18 .............................................................

56SO532/6 .................................................................... 15 .............................................................

56SO532/6/44 ........................................................... 16 .............................................................

56SO532/6/67 ........................................................... 16 .............................................................

56SO540 ......................................................................... 14 ...................................................... 6356SO540G .................................................................... 18 .............................................................

56SO550 ......................................................................... 14 ...................................................... 6356SO550G .................................................................... 18 .............................................................

56SO610 ......................................................................... 14 ...................................................... 6356SO610G .................................................................... 18 .............................................................

56SO710 ......................................................................... 14 ...................................................... 6356SO710G .................................................................... 18 .............................................................

56SO720 ......................................................................... 14 ...................................................... 6356SO720G .................................................................... 18 .............................................................

56SPOK ........................................................................... 32 ...................................................... 8256SSR ................................................................................ 27 ...................................................... 7156SSW2/10 ................................................................... 20 ...................................................... 7356SSW2/15 ................................................................... 20 ...................................................... 7356SSW10 ........................................................................ 20 ...................................................... 7356SSW10/I ..................................................................... 20 ...................................................... 7356SW110 ......................................................................... 19 ...................................................... 6456SSW15 ........................................................................ 20 ...................................................... 6456SW110HD ............................................................... 19 ...................................................... 6456SW110/I ..................................................................... 19 ...................................................... 6456SW110/2 ................................................................... 19 ...................................................... 6456SW115 ......................................................................... 19 ...................................................... 6456SW115HD ............................................................... 19 ...................................................... 6456SW115/2 ................................................................... 19 ...................................................... 6456SW120 ......................................................................... 19 ...................................................... 6456SW132 ......................................................................... 19 ...................................................... 6556SW150 ......................................................................... 19 ...................................................... 6556SW163 ......................................................................... 19 ...................................................... 6556SW220 ......................................................................... 19 ...................................................... 6456SW220CO ............................................................... 21 ...................................................... 6956SW232 ......................................................................... 19 ...................................................... 6556SW250 ......................................................................... 19 ...................................................... 6556SW263 ......................................................................... 19 ...................................................... 6556SW310 ......................................................................... 19 ...................................................... 6456SW320 ......................................................................... 19 ...................................................... 6456SW320C .................................................................... 19 ...................................................... 6656SW320R .................................................................... 21 ...................................................... 6956SW332 ......................................................................... 19 ...................................................... 6556SW332C .................................................................... 19 ...................................................... 6756SW350 ......................................................................... 19 ...................................................... 6556SW350C .................................................................... 19 ...................................................... 6756SW363 ......................................................................... 19 ...................................................... 6556SW363/2 ................................................................... 19 ...................................................... 6656SW420 ......................................................................... 19 ...................................................... 6756SW420CO ............................................................... 21 ...................................................... 6956SWT216 ..................................................................... 26 ...................................................... 7456SWH325 .................................................................... 21 ...................................................... 6856SWH340 .................................................................... 21 ...................................................... 6856SWH363 .................................................................... 21 ...................................................... 6856SWH380 .................................................................... 21 ...................................................... 6856SWH425 .................................................................... 21 ...................................................... 68

102


56SWH440 .................................................................... 21 ...................................................... 6856SWH463 .................................................................... 21 ...................................................... 6856T20 .................................................................................. 29 .............................................................

56T25 .................................................................................. 29 .............................................................

56T32 .................................................................................. 29 .............................................................

56T150 .............................................................................. 37 ...................................................... 8656T150/2 ......................................................................... 37 ...................................................... 8756T150/12 ...................................................................... 37 ...................................................... 8656T150/12/2 ................................................................. 37 ...................................................... 8756T150/24 ...................................................................... 37 ...................................................... 8656T150/24/2 ................................................................. 37 ...................................................... 8756TC .................................................................................... 25 ...................................................... 7456TC7 ................................................................................. 25 ...................................................... 7456TCB ................................................................................ 25 ...................................................... 7456TCB7 ............................................................................. 25 ...................................................... 7456TCDB ........................................................................... 25 ...................................................... 7456WL .................................................................................... 37 ...................................................... 8066CV450 .......................................................................... 46 ...................................................... 9366CV550 .......................................................................... 46 ...................................................... 9366CV463 .......................................................................... 46 ...................................................... 9366CV563 .......................................................................... 46 ...................................................... 9366CV750 .......................................................................... 46 ...................................................... 9366CV763 .......................................................................... 46 ...................................................... 9366KEY ................................................................................. 46 .............................................................

66N415 .............................................................................. 46 .............................................................

66PCC ................................................................................ 46 .............................................................

66P450 .............................................................................. 46 ...................................................... 9466P450G ......................................................................... 47 .............................................................

66P463 .............................................................................. 46 ...................................................... 9466P463G ......................................................................... 47 .............................................................

66P550 .............................................................................. 46 ...................................................... 9466P550G ......................................................................... 47 .............................................................

66P563 .............................................................................. 46 ...................................................... 9466P563G ......................................................................... 47 .............................................................

66P750 .............................................................................. 46 ...................................................... 9466P750G ......................................................................... 47 .............................................................

66P763 .............................................................................. 46 ...................................................... 9466P763G ......................................................................... 47 .............................................................

66SO450G .................................................................... 47 .............................................................

66SO463G .................................................................... 47 .............................................................

66SO550G .................................................................... 47 .............................................................

66SO563G .................................................................... 47 .............................................................

66SO563G .................................................................... 47 .............................................................

66SO750G .................................................................... 47 .............................................................

66SO763G .................................................................... 47 .............................................................

The driving force behind today's industry.

SERIESindustrial switchgear

56&&66

tech

nica

l data

clipsal.com

INTERNATIONAL

Products of Gerard Industries Pty LtdABN 27 007 873 529

Head Office12 Park Terrace, BowdenSouth Australia, 5007Telephone: +61 8 8269 0511Facsimile: +61 8 8340 1724Internet: clipsal.comE-Mail: [email protected]

International EnquiresHead Office Export DepartmentTelephone: +61 8 8269 0587Facsimile: +61 8346 1678

International RepresentativesAfricaEast AfricaClipsal East Africa (Pty) LtdTelephone: +254 11 220908Facsimile: +254 11 226417E-Mail: [email protected]

South AfricaClipsal South Africa (Pty) LtdTelephone: +27 11 314 5200Facsimile: +27 11 314 5295E-Mail: [email protected]

ZimbabweClipsal Zimbabwe (Pvt) LtdTelephone: +263 73 2483Facsimile: +263 73 2517

ArgentinaControles Tecnova S.A.Telephone: +54 114 207 9534Facsimile: +54 114 206 0228E-Mail: [email protected]

ChinaClipsal (China) LtdTelephone: +86 755 246 1122Facsimile: 86 755 246 1778E-Mail: [email protected]

GeorgiaClipsal ContactTelephone: +995 32 65 5599Fax: +995 32 65 6699E-Mail: [email protected]

GreeceClipsal Hellas S.A.Telephone: +30 1 993 9165Facsimile: +30 1 993 9730E-Mail: [email protected]

Hong KongClipsal Asia LtdTelephone: +852 2487 0261Facsimile: +852 2480 5865E-Mail: [email protected]

IndiaClipsal Industries India PVT LtdTelephone: +91 11 647 3251Facsimile: +91 11 621 3179

IndonesiaPt Clipsal Graha NusantaraTelephone: +62 21 630 6430Facsimile: +62 21 630 7729E-Mail: [email protected]

MalaysiaClipsal Malaysia Sdn BhdTelephone: +60 3 551 91111Facsimile: +60 3 551 94378E-Mail: [email protected]

Middle East U.A.EClipsal Middle EastTelephone: +971 6 557 0777Facsimile: +971 6 557 0333E-Mail: [email protected]

New ZealandAucklandClipsal Industries (NZ) LtdTelephone: +64 9 576 3403Facsimile: +64 9 576 1015E-Mail: [email protected]

ChristchurchClipsal Industries (NZ) LtdTelephone: +64 3 379 5368Fax: +64 3 379 9430

WellingtonClipsal Industries (NZ) LtdTelephone: +64 4 237 0550Facsimile: +64 4 237 6161

PakistanClipsal Pakistan (PVT) LtdTelephone: +92 21 506 7278Facsimile: +92 21 506 3369E-Mail: [email protected]

PhilippinesClipsal Philippines, Inc.Telephone: +63 2 723 9562Facsimile: +63 2 721 4389E-Mail: [email protected]

SingaporeClipsal Singapore Pte LtdTelephone: +65 415 3288Facsimile: +65 415 3289E-Mail: [email protected]

Sri LankaClipsal Sri Lanka (Private) LtdTelephone: +94 74 792 124Facsimile: +94 74 792 126E-Mail: [email protected]

TaiwanClipsal (Taiwan) Co LtdTelephone: +886 2 255 83456Facsimile: +886 2 255 83000E-Mail: [email protected]

ThailandClipsal Thailand LtdTelephone: +662 952 5338Facsimile: +662 952 5337E-Mail: [email protected]

United KingdomClipsal Ltd (UK)Telephone: +44 1494 521111Facsimile: +44 1494 523333E-Mail: [email protected]

United States of AmericaClipsal USA IncorporatedTelephone: +1 858 674 2555Facsimile: +1 858 451 9777E-Mail: [email protected]

VietnamHo Chi Minh CityClipsal - VTECTelephone: +848 856 3002Facsimile: +848 856 3006E-Mail: [email protected]

Hanoi CityClipsal - VTECTelephone: +84 4 971 3423Facsimile: +84 4 821 9054E-Mail: [email protected]

Gerard Industries Pty Ltd reserves the right to changespecifications, modify designs and discontinue itemswithout incurring obligation and whilst every effort ismade to ensure that descriptions, specifications andother information in this catalogue are correct, nowarranty is given in respect thereof and the companyshall not be liable for any error therein.

O/N 0901 Dec 01/02

©Copyright Gerard Industries Pty LtdPrinted by Custom Press Pty Ltd (08) 8346 7999

You can find this brochure and manyothers online in PDF format at:clipsal.comFollow the links off the home page oraccess the following page directly:clipsal.com/wat_lib_pdf.cfm

clipsal.com

brochures-ip 56 - 66 series.pdf

Documents

china ltdtelephone

thailand ltdtelephone

zimbabwe pvt ltdtelephone

singapore pte ltdtelephone

kongclipsal asia ltdtelephone

east u

hellas s

argentinacontroles tecnova