A U T O M A T I C M A C H I N E S

i-pile Feeder for spreader

i-pile is an automatic feeder of containers piles for destackers.

It is a valid solution for those plants that work with a large amount of containers to be processed; in fact, it considerably redu-ces the need for the operator to control the plant or the machine as well as the feeding of the piles.

The operator loads the empty container pi-les onto the belt which serves as a deposit.As the destacker finishes the containers, the piles move forward to feed it.

An electronic control supported by a de-dicated software allows the connection of i-pile to almost any destacker currently on the market.

The belt-deposit size can be customised according to customers’ needs.

A U T O M A T I C M A C H I N E S

Techmek S.r.l. via Spineda, 16 - 31040 Volpago del Montello (TV) ITALY Tel. +39.0423.24439 Fax +39.0423.615032 info@techmek.it - www.techmek.it

Administrative Center - Via Anassilide, 148 31044 Montebelluna (TV) ITALY

Feeder for spreader

i-pileThe feeder can be customised for:• Pileheight.• Numberofpiles.• Loadheightfromtheground.• Destackertypeandbrand.

technical specifications

- standard loading capacity:

up to 6 piles of containers

- speed:

1 pile every 15 seconds

- max. container size:

up to a 500 x 700 mm

- standard machine overall size:

828 x 4,418 x 1,314 mm

- power / - installed power:

400V - 50hZ, 3phase + neutral / 0,4 kW

- pneumatic system:

6 bar

- pile loading mode:

manual standard

automatic optional

- control:

PLCwithoperatingpanel