brochure · 2020. 2. 20. · unistrut ® is proud to ... • wind and snow loads should be...
TRANSCRIPT
-
A PART OF
BILLBOARD CATWALKS
BROCHURE
http://www.unistrut.us/http://www.atkore.com/
-
Installation is as easy as 1-2-3
Unistrut® is proud to introduce our quick installation grating catwalks to
service the outdoor advertising market. Our catwalks are a pre-welded
assembly with a modular design eliminating most of the field assembly,
creating HUGE labor savings. They are available in a range of sizes and
exceed OSHA standards for safety.*
-
Experience a Better Solution
Easy-to-InstallPre-welded assembly and lightweight material create a quick and easy installation
Please Note: This product is not rated for use as fall protection.* Based on OSHA 1910.28
Unistrut’s new catwalks are built with a unique modular design, eliminating most of the field assembly, creating HUGE labor savings.
DurableEngineered with a strength to weight ratio allowing it to withstand substantial loads, and with a galvanized G-90 finish to withstand the elements.
SafeAnti-skid surface with 4” kickplates for a safe working platform. Open surface design to prevent the build-up of dirt, debris, ice and snow.
Modular DesignModular design can be configured to fit different types and sizes of billboards. Many mounting kit options available for various support beams.
Quality AssuranceExceeds OSHA outdoor industry requirements* and extensively load tested to ensure performance.
We proudly manufacture our Catwalks in America.
Cost-EffectivePre-welded design eliminates extensive assembly labor
-
UNISTRUT®. BUILD SOMETHING GREAT.4
PRODUCT OVERVIEW
Specifications:
• Individual grating planks are 12” wide, 3” tall, 18 ga. thick• Assembly as shown above is pre-welded, requiring no assembly in the field• 4” Kick Plates are required by OSHA for safety• Kick Plates are 14 ga. thick, welded to the grating plank and with a return flange for strength• End Plates are available pre-welded to the assembly, or individually and can be bolted to the platform• Contact Unistrut for information about attaching lights and other accessories
Material & Finish Specifications:
• Pre-Galvanized (PG): ASTM A653 Grade 33, G90• Electro-Galvanized (EG): ASTM B633, Type III SC1
Load Capacity:
• Maximum Allowable Design Load: See below table• Supports must be capable of supporting the design load plus the weight of the platform• Wind and snow loads should be accounted for when calculating platform and support loads
Length Options*(12', 20', 24')
4" KickPlate
Width Options(2', 3', 4')
* These lengths are for a single platform assembly. Longer lengths can be accomplished by splicing platforms together.
Span Between Supports6 ft. or less 8 ft. 10 ft. 12 ft. 14 ft. 16 ft.
Max. Concentrated Load (lbs.) 750 630 500 420 360 310
Max. Uniform Load (lbs.) 1,500 1.260 1,000 840 720 630Max. Allowable Design Loads include a Safety Factor of 4.0
-
800.468.9510 • WWW.UNISTRUT.US
UNISTRUT®
5
Attachment to C-Channel Supports Attachment to 90˚ Supports
Attachment to Other Structures
Platform Platform
Platform
G643
Beam Support
G643
Beam Support
G643
Beam Support
INSTALLATION OPTIONS
http://www.unistrut.us/
-
UNISTRUT®. BUILD SOMETHING GREAT.6
INSTALLATION REQUIREMENTS
6" Min. / 18" Max.
Platform SegmentSupport
End of Platform Segment
Splice Support
Requirements
Typical supports for a single platform
See page 4 for load capacities based
on span
16' Max.
Support Both Sides
Platform SegmentNo Splices between Supports
6" Min. / 18" Max 6" Min. / 18" Max
SupportBoth sidesSplice
Platform SegmentBoth sides
End Support
Requirements
Span
-
800.468.9510 • WWW.UNISTRUT.US
UNISTRUT®
7
SPLICING & ASSEMBLY (IF NEEDED)
Platform SegmentPlatform SegmentP/N: See Page 6Configuration B Shown
#12 Self Tapping Screw (Typ.)P/N: GHTS012075Install after HHCS050119 Cap Screws
Hex NutP/N: HHXN050
Splice PlateP/N: G752-X Cap Screw
P/N: HHCS050119
Hex Nut (Typ.)P/N: HHXN050
Cap Screw (Typ.)P/N: HHCS050119
See Below
End Kick Plate P/N: G655-XBolt-On
End Kick PlatePre-Welded to Platform SegmentNo Assembly Necessary
Platform SegmentP/N: See Page 6Configuration C Shown
6" Min. / 18" Max 6" Min. / 18" Max Lock WasherP/N: HLKW050
Lock WasherP/N: HLKW050
http://www.unistrut.us/
-
UNISTRUT®. BUILD SOMETHING GREAT.8
ORDERING
Platform Part Number
XXX X PGG
Length
12: 12ft.20: 20ft.24: 24ft.
Width
2: 2ft.3: 3ft.4: 4ft. Configuration
See belowA, B or C
Material / Finish
PG: Pre-Galvanized
Example:
G224C PG for a 2' wide, 24' long platform with Splice Plates at both ends
Length Options*(12', 20', 24')
4" KickPlate
Width Options(2', 3', 4')
CONFIGURATION BCONFIGURATION C
Configuration AKick Plates at both ends
Configuration BKick Plate at one end
Splice Plate at the other end
Configuration CSplice Plates at both ends
-
800.468.9510 • WWW.UNISTRUT.US
UNISTRUT®ORDERING
9
ACCESSORIES
G752-X Splice Plate Kit3/16" thickness
G655-X End Kick Plate Kit14 ga. thickness
G643 Beam Attachment Kit SPLICING HARDWARE
Cap Screw
HHCS050119 EG (1/2" x 1-3/16")
Hex Nut
HHXN050 EG (1/2")
X = Width of Platform in Feet (2’, 3’, or 4’) X = Width of Platform in Feet (2’, 3’, or 4’)
2 1
A
B
A
B
12
-
HEX HEAD CAP SCREW - 3/8" x 1-
1/4"DO NOT SCALE DRAWING
HHCS BoltSHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
ASIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRICTOLERANCING PER:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED.
2 1
A
B
A
B
12
-
HEXAGON NUT
DO NOT SCALE DRAWING
HHXN NutSHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 2:1 WEIGHT:
REVDWG. NO.
ASIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRICTOLERANCING PER:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED.
Lock Washer
HLKW050 EG (1/2")
Kit Includes:Splice PlateCap ScrewsHex NutsLock Washers
Kit Includes:End Kick PlateCap ScrewsHex NutsLock WashersSelf-Tapping Screws
This Bolt and Hex Nut sold separately
http://www.unistrut.us/
-
UNISTRUT®. BUILD SOMETHING GREAT.
SPLICING PARTS LIST
10
Splicing Longer Length Platforms
Size Desired Platform Segment Splice Plate KitWidth Length P/N Qty. P/N Qty.
X=2', 3' or 4'
36'GX12BGX24B
1G752-X 1
140' GX20B 2 G752-X 1
48' GX24B 2 G752-X 1
60'GX20CGX20B
1G752-X 2
2
64'GX24CGX20B
1G752-X 2
2
72'GX24CGX24B
1G752-X 2
2
80'GX20CGX20B
2G752-X 3
2
96'GX24CGX24B
2G752-X 3
2
100'GX20CGX20B
3G752-X 4
2
Option 1: Using Platform Segments with Pre-Welded End Kick Plates
Option 2: Using Platform Segments with Open Ends for Splicing
Size Desired Platform Segment Splice Plate Kit End Plate KitWidth Length P/N Qty. P/N Qty. P/N Qty.
X=2', 3' or 4'
36'GX12CGX24C
1G752-X 1 G655-X 2
1
40' GX20C 2 G752-X 1 G655-X 2
48' GX24C 2 G752-X 1 G655-X 2
60' GX20C 3 G752-X 2 G655-X 2
64'GX24CGX20C
1G752-X 2 G655-X 2
2
72' GX24C 3 G752-X 2 G655-X 2
80' GX20C 4 G752-X 3 G655-X 2
96' GX24C 4 G752-X 3 G655-X 2
100' GX20C 5 G752-X 4 G655-X 2
Note:There are many ways to splice together a longer length platform. The above two options represent the most common and economical.
-
800.468.9510 • WWW.UNISTRUT.US
UNISTRUT®WARRANTY
11
LIMITED WARRANTY
Unistrut® warrants for a period of one year from the date of shipment or completion of installed work, as
applicable, that the products or services will be free from defects in workmanship and materials at the time
of delivery to the carrier. No warranty is given for products or components that have been (i) manufactured
by companies other than Unistrut; (ii) subject to misuse, improper installation, corrosion, or negligence;
(iii) disassembled, modified or repaired by unauthorized persons; (iv) used in any manner contrary to
Unistrut's instructions or recommendations; or (v) subject to (1) corrosion beyond normal weathering; (2)
corrosion caused by disruption of any product coating after production; (3) corrosion occurring at points in
the product that have been drilled, cut or welded; or (4) corrosion occurring in unusual or highly corrosive
soil, environmental or industrial conditions (in case of corrosion under this subsection (v)(4), Unistrut's limited
obligation is to ensure that the product complies with its published specifications).
UNISTRUT DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY
WARRANTY THAT THE PRODUCTS WILL CONFORM TO ANY SAMPLES, ANY WARRANTY THAT THE
PRODUCTS WILL NOT DISCOLOR OR THE TEXTURE OR FINISH WILL NOT CORRODE OR DETERIORATE,
AND ANY WARRANTY REGARDING ANY ANCILLARY SERVICES RENDERED.
REMEDY AND LIMITATION OR LIABILITY
If the products do not comply with the warranties set forth in these Terms, Buyer must provide prompt
written notice to Unistrut of the non-conformance in reasonably sufficient detail (and such other detail as
Unistrut requests) and must comply with Unistrut's instructions and policies regarding the nonconforming
product. Buyer must provide such notice within the warranty period. Unistrut's liability will terminate upon
expiration of the warranty period. Unistrut's sole liability for non-conforming products will be to repair or
replace the non-conforming product or return the purchase price paid therefore, at Unistrut's sole option.
Buyer will bear all disassembly, shipment and reinstallation costs of repaired or replaced products. IN NO
EVENT WILL UNISTRUT BE LIABLE IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE FOR INCIDENTAL,
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, REGARDLESS OF WHETHER UNISTRUT WAS INFORMED
OF THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT WILL UNISTRUT'S LIABILITY EXCEED AN
AMOUNT EQUAL TO THE SALES PRICE OF THE PRODUCTS.
http://www.unistrut.us/
-
HEADER
4
®
©2017 Atkore International, Inc. All rights reserved. US-L-5013-1701
16100 South Lathrop Ave
Harvey, IL 60426
TOLL-FREE / 800-468-9510
FAX / 800-468-9510
www.unistrut.us
http://www.unistrut.us/http://www.steelcomponentsinc.net/http://www.alliedeg.ushttp://www.easternwire.com/http://www.unistrutconstruction.comhttp://www.power-strut.comhttp://www.heritageplastics.comhttp://www.kaf-tech.comhttp://www.flexhead.comhttp://www.ampipe.comhttp://www.razorribbon.comhttp://www.afcweb.comhttp://www.sprinkflex.comhttp://www.columbiambf.cahttp://www.unistrut.comhttp://www.copecabletray.comhttp://www.ridgelinepipe.com/http://www.afcweb.com/product-category/acs-uni-fab/http://www.atc-mechanical.com/mechanical-tubing/tectron/http://www.konkorefittings.com