br enclosures ilinq catalogue
TRANSCRIPT
-
7/30/2019 Br Enclosures Ilinq Catalogue
1/64
2011 iLINQ CATALOGUE
-
7/30/2019 Br Enclosures Ilinq Catalogue
2/64
Commerical & Domestic Metering EnclosuresHager B&R is a joint venture between B&R and Hager, representing B&Rs domestic and
commercial range of enclosures. These include domestic metering enclosures & connection
equipment (meter boxes), commercial metering enclosures and switchboards up to 630 Amps.
Data Racks and Cabinets
B&R Data Systems is a leading Australian manufacturer of high quality products and solutions
for the Australian ICT, Telecommunications and Data Centre markets. B&R Data Systems
specialise in server and network racks, power management, cooling, cable management and
security solutions.
Hazardous Area Equipment
B&R Ex Systems is a new division of B&R Enclosures specialising in the supply of electricalequipment for hazardous areas. B&R Ex Systems offer a comprehensive range of enclosures,
lighting, controls and glanding, as well as custom control touts.
Industrial Enclosures & Switchboards
B&R Enclosures manufactures a range of electrical enclosures for a variety of applications in
industrial, mining, switchboards and process control. Since operations began in 1955, B&R
Enclosures has been a leading manufacturer of electrical enclosures to the Australian market.
B&R engages in a policy of continuous development and improvement of its products. Therefore the Company reserves the right to alter, add and/or delete speciciations of any product or equipment without notice and without incurring liability.
B&R Enclosures is Australias leading manufacturer of electrical enclosures, with a comprehensive range of products designed
for industrial conditions, and the severe environments so common in Australia.
A brand built on quality
Company Overview
-
7/30/2019 Br Enclosures Ilinq Catalogue
3/64
Introduction
Overview...................................................................................................................2
Single Door Enclosure Overview ..............................................................................4
Double Door Enclosure Overview ............................................................................5
Enclosure Selection Guide .......................................................................................6
Size Selection Charts
1800 high, 400 deep .................................................................................................7
1800 high, 600 deep .................................................................................................8
1800 high, 800 deep .................................................................................................92000 high, 400 deep ...............................................................................................10
2000 high, 600 deep ...............................................................................................11
2000 high, 800 deep ...............................................................................................12
2200 high, 400 deep ...............................................................................................13
2200 high, 600 deep ...............................................................................................14
2200 high, 800 deep ...............................................................................................15
Product Information
General Accessories...............................................................................................16
Single Door Enclosure ............................................................................................18
Double Door Enclosure ..........................................................................................20
Frame .....................................................................................................................22
Single Door .............................................................................................................24
Double Door ...........................................................................................................26
Cladding .................................................................................................................28
Top Cover ...............................................................................................................30
Gland Plate & Frame ..............................................................................................32
Adjustable Gland Plate System ..............................................................................34
Mounting Pan .........................................................................................................36
Swing Frame ..........................................................................................................38
Swing Frame Trim ..................................................................................................40
19" Rack Rails ........................................................................................................42
Internal Rail System ...............................................................................................44
Hinged Escutcheon ................................................................................................46
Plinth Kit .................................................................................................................48
Plinth Cladding .......................................................................................................50
Plinth Mounting Base..............................................................................................52
Plan Holder .............................................................................................................54
Laptop Lectern........................................................................................................56
Light Kits .................................................................................................................58
Technical GuideIP Ratings Chart .....................................................................................................60
Contents
-
7/30/2019 Br Enclosures Ilinq Catalogue
4/64
2 Introduction
Overview
B&R manufacture a range of products
to suit various environments and
locations. Some enclosures are suited
to highly specic applications whilst
others have been designed for a wide
variety of uses. We call these multiple
application enclosure systems.
These multiple application systems
are available with a wide range
of accessories to better allow the
enclosures to be congured to suit the
application. The benet of a multiple
application enclosure is that you are
able to order your highly specic
requirement to arrive quickly and cost-
effectively, by conguring a standard
enclosure with a range of accessories.
iLINQ is our newest multiple application
enclosure system and is suitable for a
range of applications including:
Industrial automation
Control system & plant construction
Electronic packaging
Information technology Networking infrastructure
Telecommunications
iLINQ is a bayable enclosure
system that can be congured to
suit a wide variety of applications. It
features a unique symmetrical rail
prole that allows components to be
interchangeable whether on top, bottom,
front or back. As part of the design
process B&R has worked with a widevariety of industry experts to ensure
iLINQ suits industry specications and
applications.
The enclosures are available in
single or double door congurations
and can be quickly and easily bayed
together. A standard enclosure comes
preassembled with frame, door, xed
rear panel, top (with eye bolts), gland
plate system and mounting pan. Ifrequired as a stand alone enclosure,
side panels or doors can be purchased
separately. Once bayed together or
tted with side panels, enclosures are
rated to IP55, ensuring limited ingress
of dust and complete protection from
low pressure jets of water. An extensive
range of cladding components and
accessories are available, and all
components that make up an enclosure
can be purchased individually, so that a
solution can be congured to meet your
exact requirements.
-
7/30/2019 Br Enclosures Ilinq Catalogue
5/64
iLINQ is an Australian designed and
manufactured, high quality, modular,
bayable enclosure system, that is
extremely versatile and easy to install.
B&R developed the iLINQ range
in response to demand from our
customers for a user friendly bayable
enclosure system which was both easy
to use and cost-effective.
Some of the key features of iLINQ are:
Easy to order
Easy to assemble
Easy to install
Flexible design
Panel cutouts and paint any
powdercoat colour (special order)
Easy to order The symmetrical
design of the enclosure system allows
the same part to t many locations.
The easy to use catalogue clearly
lists all parts and accessories for each
enclosure size. All B&R staff have had
extensive assembly training and areavailable to help congure your iLINQ
bayable enclosure system.
Easy to assemble iLINQ enclosures
are delivered preassembled with
front door, rear panel, gland plate
system, mounting pan and at top. All
components can also be purchased
separately for applications which
require a special conguration.
Cladding can be taken off and rotated
very quickly. A door can be changed
from right to left hand hinging in less
than 5 minutes. For ease of installation,
there are only 5 metric hex drive keys
required 2, 3, 4, 5, 6. All xings are
hex drive button head set screws andtaptites.
M6 and M8 front access cage nuts and
M5 taptites are used throughout the
enclosures, at 25mm increments.
Easy to install The plinth system
allows levelling from inside the
enclosure frame. One person can bay
iLINQ enclosures together using hand
tools or a battery drill.
Why buy iLINQ?The ultimate enclosure solution for multiple applications.
B&R Enclosures iLINQ Catalogue 2011 3
-
7/30/2019 Br Enclosures Ilinq Catalogue
6/64
1800mm high
Top Cover Flat
Fixed Cladding*
Mounting Pan
Gland Plate System
Frame
Door
Model LQE180404 LQE180604 LQE180804 LQE180406 LQE180606 LQE180806 LQE180408 LQE180608 LQE180808
Height (mm) 1800 1800 1800 1800 1800 1800 1800 1800 1800
Width (mm) 400 600 800 400 600 800 400 600 800
Depth (mm) 400 400 400 600 600 600 800 800 800
Model LQE200404 LQE200604 LQE200804 LQE200406 LQE200606 LQE200806 LQE200408 LQE200608 LQE200808
Height (mm) 2000 2000 2000 2000 2000 2000 2000 2000 2000
Width (mm) 400 600 800 400 600 800 400 600 800
Depth (mm) 400 400 400 600 600 600 800 800 800
Model LQE220404 LQE220604 LQE220804 LQE220406 LQE220606 LQE220806 LQE220408 LQE220608 LQE220808
Height (mm) 2200 2200 2200 2200 2200 2200 2200 2200 2200
Width (mm) 400 600 800 400 600 800 400 600 800
Depth (mm) 400 400 400 600 600 600 800 800 800
iLINQ Single Door Enclosure
2000mm high
2200mm high
*All side cladding sold separately
Eye Bolts
4 Introduction
Single Door Enclosure Overview
-
7/30/2019 Br Enclosures Ilinq Catalogue
7/64
Top Cover FlatEye Bolts
Frame
Door second
closing
Mounting Pan
Door rst closing
1800mm high
Model LQE180804/DD LQE181004/DD LQE181204/DD LQE180806/DD LQE181006/DD LQE181206/DD LQE180808/DD LQE181008/DD LQE181208/DD
Height (mm) 1800 1800 1800 1800 1800 1800 1800 1800 1800
Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200
Depth (mm) 400 400 400 600 600 600 800 800 800
Model LQE200804/DD LQE201004/DD LQE201204/DD LQE200806/DD LQE201006/DD LQE201206/DD LQE200808/DD LQE201008/DD LQE201208/DD
Height (mm) 2000 2000 2000 2000 2000 2000 2000 2000 2000
Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200
Depth (mm) 400 400 400 600 600 600 800 800 800
Model LQE220804/DD LQE221004/DD LQE221204/DD LQE220806/DD LQE221006/DD LQE221206/DD LQE220808/DD LQE221008/DD LQE221208/DD
Height (mm) 2200 2200 2200 2200 2200 2200 2200 2200 2200
Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200
Depth (mm) 400 400 400 600 600 600 800 800 800
iLINQ Double Door Enclosure
2000mm high
2200mm high
*All side cladding sold separately
Fixed Cladding*
Gland Plate System
B&R Enclosures iLINQ Catalogue 2011 5
Double Door Enclosure Overview
-
7/30/2019 Br Enclosures Ilinq Catalogue
8/64
nc osure eatures
Galvanised ro formed prole
Stainless steel hinge pins
Symmetrical frame
Patented 100mm & 200mm plinth system
Front M6 & M8 nu s in rame
Materials
Frame galvanised steel
c ness .
Cladding zinc coated steel
hickness .6mm
as e po yur e ane oame n p ace
ur ace n s pow ercoa e
ro ec o n ra n g
iLINQ enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether on top,
bottom, front or back.
The enclosures are available in single or double door congurations and can be quickly and easily bayed together. Once bayed
together or tted with cladding, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low
pressure jets of water.
The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other colours and solutions are available upon request.
Inclusions
Frame
Rear xed panel (screw on type)
Flat top with eye bolts
Solid door (1000mm & 1200mm wide cabinets are tted with double doors)
Quarter turn lock with a 7mm square insert
3mm thick galvanised mounting pan
Fixed gland plate 1.6mm thick galvanised steel plate(2 per set on double door enclosures)
Step 1 Select enclosure model size from Size Selection Chart (pages 7 15). The charts are categorised by height
and depth (one page displays one height and depth with widths available) and is incremented from smallest to
largest height.
Step 2 Select cladding & mounting components from the range listed in the size selection column under the
selected enclosure.
Step 3 Select accessories from the range listed in the selected enclosure column in the size selection chart.
Step 4 If additional information is required see dimensions section (from page 16 59) or contact your local B&Rsales ofce.
Step 5 Contact local sales ofce to place order and/or arrange for any special requirements such as punching or
specic powdercoat colours.
How to order
Enclosure Selection Guide
6 Introduction
-
7/30/2019 Br Enclosures Ilinq Catalogue
9/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
# Items required with component
1800 High, 400 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE180404 LQE180604 LQE180804 LQE180804/DD LQE181004/DD LQE181204/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP1804 2829
Cladding CF xed LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF1804 2829
Door solid LQD1804 LQD1804 LQD1804 LQD1804 LQD1804 LQD1804 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 5051
Plinth cladding 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF36U LQSF36U LQSF36U 3839
# Rail horizontal (2) # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS36U08 LQSS36U08 4041
Trims centre (2) LQSC36U08 LQSC36U08 4041
# Set of 2 Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon hinged
1800 high enclosure equals 17 x 100mm internal escutcheon modules
Escutcheon LQHE1706 LQHE1708 LQHE1708 4647
# Rail vertical # LQRV17 # LQRV17 # LQRV17 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
Size Selection Chart
B&R Enclosures iLINQ Catalogue 2011 7
-
7/30/2019 Br Enclosures Ilinq Catalogue
10/64
1800 High, 600 Deep
Single Door Double Door (DD)Page
Enclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE180406 LQE180606 LQE180806 LQE180806/DD LQE181006/DD LQE181206/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP1806 LQCP1806 LQCP1806 LQCP1806 LQCP1806 LQCP1806 2829
Cladding CF xed LQCF1806 LQCF1806 LQCF1806 LQCF1806 LQCF1806 LQCF1806 2829
Door LQD1806 LQD1806 LQD1806 LQD1806 LQD1806 LQD1806 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 5051
Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF36U LQSF36U LQSF36U 3839
# Rail - horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS36U08 LQSS36U08 4041
Trim centre LQSC36U08 LQSC36U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon - hinged
1800 high enclosures equals 17 x 100mm internal escutcheon modules
Escutcheon LQHE1706 LQHE1708 LQHE1708 4647
# Rail vertical # LQRV17 # LQRV17 # LQRV17 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LDRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
8 Size Selection Chart
Enclosure Selection Guide
-
7/30/2019 Br Enclosures Ilinq Catalogue
11/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
1800 High, 800 Deep
Single Door Double Door (DD)Page
Enclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE180408 LQE180608 LQE180808 LQE180808/DD LQE181008/DD LQE181208/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP1808 LQCP1808 LQCP1808 LQCP1808 LQCP1808 LQCP1808 2829
Cladding CF xed LQCF1808 LQCF1808 LQCF1808 LQCF1808 LQCF1808 LQCF1808 2829
Door LQD1808 LQD1808 LQD1808 LQD1808 LQD1808 LQD1808 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 5051
Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF36U LQSF36U LQSF36U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS36U08 LQSS36U08 4041
Trim centre LQSC36U08 LQSC36U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon hinged
1800 high enclosures equals 17 x 100mm internal escutcheon modules
Escutcheon LQHE1706 LQHE1708 LQHE1708 4647
# Rail vertical # LQRV17 # LQRV17 # LQRV17 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
B&R Enclosures iLINQ Catalogue 2011 9
Size Selection Chart
-
7/30/2019 Br Enclosures Ilinq Catalogue
12/64
2000 High, 400 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE200404 LQE200604 LQE200804 LQE200804/DD LQE201004/DD LQE201204/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP - hinged LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP2004 2829
Cladding CF - xed LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF2004 2829
Door LQD2004 LQD2004 LQD2004 LQD2004 LQD2004 LQD2004 2427
Plinth kit -100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit - 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding - 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 5051
Plinth cladding - 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF40U LQSF40U LQSF40U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS40U08 LQSS40U08 4041
Trim centre LQSC40U08 LQSC40U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon hinged
2000 high enclosures equals 19 x 100mm internal escutcheon modules
Escutcheon LQHE1906 LQHE1908 LQHE1908 4647
# Rail vertical # LQRV19 # LQRV19 # LQRV19 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 - - # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
Size Selection Chart
10 Size Selection Chart
-
7/30/2019 Br Enclosures Ilinq Catalogue
13/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2000 High, 600 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE200406 LQE200606 LQE200806 LQE200806/DD LQE201006/DD LQE201206/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP2006 LQCP2006 LQCP2006 LQCP2006 LQCP2006 LQCP2006 2829
Cladding CF xed LQCF2006 LQCF2006 LQCF2006 LQCF2006 LQCF2006 LQCF2006 2829
Door LQD2006 LQD2006 LQD2006 LQD2006 LQD2006 LQD2006 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4647
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4647
Side Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 4849
Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 4849
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF40U LQSF40U LQSF40U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS40U08 LQSS40U08 4041
Trim centre LQSC40U08 LQSC40U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon - hinged
2000 high enclosures equals 19 x 100mm internal escutcheon modules
Escutcheon LQHE1906 LQHE1908 LQHE1908 4647
# Rail vertical # LQRV19 # LQRV19 # LQRV19 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
Size Selection Chart
B&R Enclosures iLINQ Catalogue 2011 11
-
7/30/2019 Br Enclosures Ilinq Catalogue
14/64
2000 High, 800 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE200408 LQE200608 LQE200808 LQE200808/DD LQE201008/DD LQE201208/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP2008 LQCP2008 LQCP2008 LQCP2008 LQCP2008 LQCP2008 2829
Cladding CF xed LQCF2008 LQCF2008 LQCF2008 LQCF2008 LQCF2008 LQCF2008 2829
Door LQD2008 LQD2008 LQD2008 LQD2008 LQD2008 LQD2008 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 5051
Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF40U LQSF40U LQSF40U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS40U08 LQSS40U08 4041
Trim centre LQSC40U08 LQSC40U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon - hinged
2000 high enclosures equals 19 x 100mm internal escutcheon modules
Escutcheon LQHE1906 LQHE1908 LQHE1908 4647
# Rail vertical # LQRV19 # LQRV19 # LQRV19 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
Size Selection Chart
12 Size Selection Chart
-
7/30/2019 Br Enclosures Ilinq Catalogue
15/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2200 High, 400 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE220404 LQE220604 LQE220804 LQE220804/DD LQE221004/DD LQE221204/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP2204 LQCP2204 LQCP2204 LQCP2204 LQCP2204 LQCP2204 2829
Cladding CF xed LQCF2204 LQCF2204 LQCF2204 LQCF2204 LQCF2204 LQCF2204 2829
Door LQD2204 LQD2204 LQD2204 LQD2204 LQD2204 LQD2204 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 5051
Plinth cladding 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF45U LQSF45U LQSF45U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS45U08 LQSS45U08 4041
Trim centre LQSC45U08 LQSC45U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon hinged
2200 high enclosures equals 21 x 100mm internal escutcheon modules
Escutcheon LQHE2106 LQHE2108 LQHE2108 4647
# Rail vertical # LQRV21 # LQRV21 # LQRV21 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
Size Selection Chart
B&R Enclosures iLINQ Catalogue 2011 13
-
7/30/2019 Br Enclosures Ilinq Catalogue
16/64
2200 High, 600 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE220406 LQE220606 LQE220806 LQE220806/DD LQE221006/DD LQE221206/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP2206 LQCP2206 LQCP2206 LQCP2206 LQCP2206 LQCP2206 2829
Cladding CF xed LQCF2206 LQCF2206 LQCF2206 LQCF2206 LQCF2206 LQCF2206 2829
Door LQD2206 LQD2206 LQD2206 LQD2206 LQD2206 LQD2206 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 LQPC0106 5051
Plinth cladding 200 mm LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 LQPC0206 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U 3839
# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim side LQSS45U08 LQSS45U08 4041
Trim centre LQSC45U08 LQSC45U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon hinged
2200 high enclosures equals 21 x 100mm internal escutcheon modules
Escutcheon LQHE2106 LQHE2108 LQHE2108 4647
# Rail vertical # LQRV21 # LQRV21 # LQRV21 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
14 Size Selection Chart
Size Selection Chart
-
7/30/2019 Br Enclosures Ilinq Catalogue
17/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2200 High, 800 Deep
Single Door Double Door (DD)
PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD
Enclosure LQE220408 LQE220608 LQE220808 LQE220808/DD LQE221008/DD LQE221208/DD 1821
Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.
Cladding & Mounting Components
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Side
Cladding CP hinged LQCP2208 LQCP2208 LQCP2208 LQCP2208 LQCP2208 LQCP2208 2829
Cladding CF xed LQCF2208 LQCF2208 LQCF2208 LQCF2208 LQCF2208 LQCF2208 2829
Door LQD2208 LQD2208 LQD2208 LQD2208 LQD2208 LQD2208 2427
Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849
Plinth kit 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849
Side Plinth cladding 100 mm LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 LQPC0108 5051
Plinth cladding 200 mm LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 LQPC0208 5051
Side cladding and plinth components not included in enclosure (LQE) assembly
Accessories
Description 400 600 800 800 DD 1000 DD 1200 DD Page
Swing Frames
Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U 3839
# Rail - horizontal # LQRF06 # LQRF08 # LQRF08 3839
Trim - side LQSS45U08 LQSS45U08 4041
Trim - centre LQSC45U08 LQSC45U08 4041
# Horizontal rails required with each swing frame sold. Swing frame trims optional
Escutcheon - hinged
2200 high enclosures equals 21 x 100mm internal escutcheon modules
Escutcheon LQHE2106 LQHE2108 LQHE2108 4647
# Rail vertical # LQRV21 # LQRV21 # LQRV21 4647
Rail horizontal LQRH06 LQRH08 LQRH08 4647
# Vertical rails required with each escutcheon
Horizontal rails optional
Plan Holder
35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
80 mm deep LQPH04/80 LQPH06/80 LQPH06/80 LQPH04/80 LQPH05/80 LQPH06/80 5455
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
* 1 required when tting plan holder
Laptop Lectern
Laptop lectern LQLL LQLL LQLL 5657
# Door rail # LQRD06 # LQRD08 # LQRD06 4445
# 2 required when tting laptop lecterns
Light Kits
Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859
LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859
Door Rail
Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445
# Items required with component
B&R Enclosures iLINQ Catalogue 2011 15
Size Selection Chart
-
7/30/2019 Br Enclosures Ilinq Catalogue
18/64
Baying Accessories
Catalogue No Description
LQBK Baying kit (8 external / 10 internal)
LQMF1801 Mounting pan inll 1800 high
LQMF2001 Mounting pan inll 2000 high
LQMF2201 Mounting pan inll 2200 high
Locks
Catalogue No Description
LQLA7S Lock assembly 7mm square
LQLS/92268 Swing handle, keylockable (92268)
SKZ Key - ZA27 3 way (7 mm , 8 mm , 3 mm )
SK8 Key - Metal (8 mm )
LQLI8S Lock insert 8mm square
LQLI8T Lock insert 8mm triangle
LQLI3D Lock insert 3mm double bit
Square Lock InsertSKZ key
Swing Handle Lock
Baying kit and mounting pan
inll panel
7mm Square Turnbuckle
Lock Assembly
16 Product Information
General Accessories
-
7/30/2019 Br Enclosures Ilinq Catalogue
19/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
General Accessories
Catalogue No Description
LQDS Door Stay (white)
Fixings
Catalogue No Description Pack Qty
LQCG06 Cage nuts M6 (front access) 20
LQCG08 Cage nuts M8 (front access) 20
IPCG06 Cage nuts M6 (rear access) 20
IPCG08 Cage nuts M8 (rear access) 20
LQB0612 Button head hex drive set screws (M6 x 12) 20
LQB0812 Button head hex drive set screws (M8 x 12) 20
LQB0512 Button head hex drive set screws (M5 x 12) 20
LQB0616 Button head hex drive set screws (M6 x 16) 20
LQB0620 Button head hex drive set screws (M6 x 20) 20
LQB0625 Button head hex drive set screws (M6 x 25) 20
LQB0825 Button head hex drive set screws (M8 x 25) 20
IPWS06 Star washers M6 20
IPWS08 Star washers M8 20
IPWF06 Flat washers M6 20
IPWF08 Flat washers M8 20
Front access cage nut Rear access cage nut
Star washers Flat washers
Button head hex drive set screw
For more information visit www.brenclosures.com.au/lqa.htm B&R Enclosures iLINQ Catalogue 2011 17
-
7/30/2019 Br Enclosures Ilinq Catalogue
20/64
Inclusions
Frame
Rear xed panel (screw on type)
Flat top with four eye bolts
Solid door
Quarter turn lock with a 7mm square insert
Mounting pan 3mm thick galvanised Fixed gland plate 1.6mm thick galvanised steel
iLINQ single door enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether on
top, bottom, front or back.
The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must
be the same. Once bayed together or tted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and
complete protection from low pressure jets of water.
The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other options and solutions are available upon request.
nc osure eatures
Galvanised roll formed prole
Stainless s ee nge p ns
Symmetrical frame
a en e p n sys em (optional)
Front access M6 & M8 cage nuts in rame
Materials
Frame galvanised steel
c ness . mm
Cladding zinc coated steel
Thickness 1.6mm
Gasket po yure ane foamed n p ace
Surface nish pow ercoa e
ro ec o n ra n g
brenclosures.com.au/lqse.htm
18 Product Information
Single Door Enclosure
-
7/30/2019 Br Enclosures Ilinq Catalogue
21/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2000mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE200404 2004 399 408
LQE200604 2004 599 408
LQE200804 2004 799 408
LQE200406 2004 399 608
LQE200606 2004 599 608
LQE200806 2004 799 608
LQE200408 2004 399 808LQE200608 2004 599 808
LQE200808 2004 799 808
1800mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE180404 1804 399 408
LQE180604 1804 599 408
LQE180804 1804 799 408
LQE180406 1804 399 608
LQE180606 1804 599 608
LQE180806 1804 799 608
LQE180408 1804 399 808LQE180608 1804 599 808
LQE180808 1804 799 808
2200mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE220404 2204 399 408
LQE220604 2204 599 408
LQE220804 2204 799 408
LQE220406 2204 399 608
LQE220606 2204 599 608
LQE220806 2204 799 608
LQE220408 2204 399 808LQE220608 2204 599 808
LQE220808 2204 799 808
Front View
H1
"
"
W1
H2
Side View
D1
92
B&R Enclosures iLINQ Catalogue 2011 19For more information visit www.brenclosures.com.au/lqse.htm
Single Door Enclosure
Additional Dimensions
Front Opening
Height, H2 = (H1 94)Width, W2 = (W1 90)
Side Opening
Height, H2 = (H1 94)
Depth, D2 = (D1 99)
Top Opening
Width, W2 = (W1 90)
Depth, D2 = (D1 99)
Bottom Fixings
Width, W3 = (W1 131)
Depth, D3 = (D1 140)
Top Opening
W1
W2
W3
D1
D2
D3
27
Detail
D1
D2
D3
W1
W2
W3
-
7/30/2019 Br Enclosures Ilinq Catalogue
22/64
Inclusions
Frame
Rear xed panel (screw on type)
Flat top with four eye bolts
2 Solid doors
1st closing door has 2 locking points2nd closing door has 4 locking points
Quarter turn lock with a 7mm square insert
Mounting Pan 3mm thick galvanised Fixed gland plates 2 x 1.6mm thick galvanised steel
iLINQ double door enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether
on top, bottom, front or back.
The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must
be the same. Once bayed together or tted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and
complete protection from low pressure jets of water.
The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other colours and solutions are available upon request.
nc osure eatures
a van se ro orme pro e
Stainless steel hinge pins
ymme r c a rame
Patented plinth system (optional)
ron nu s n rame
a er a s
Frame galvanised steel
Thickness 1.5mm
a ng z n c coa e s ee
Thickness 1.6mm
Gasket polyurethane foamed in place
Surface nish powdercoated RAL7035 Protection rating IP55
brenclosures.com.au/lqdde.htm
Double Door Enclosure
20 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
23/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2000mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE200804/DD 2004 799 408
LQE201004/DD 2004 999 408
LQE201204/DD 2004 1199 408
LQE200806/DD 2004 799 608
LQE201006/DD 2004 999 608
LQE201206/DD 2004 1199 608
LQE200808/DD 2004 799 808
LQE201008/DD 2004 999 808
LQE201208/DD 2004 1199 808
1800mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE180804/DD 1804 799 408
LQE181004/DD 1804 999 408
LQE181204/DD 1804 1199 408
LQE180806/DD 1804 799 608
LQE181006/DD 1804 999 608
LQE181206/DD 1804 1199 608
LQE180808/DD 1804 799 808
LQE181008/DD 1804 999 808
LQE181208/DD 1804 1199 808
2200mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQE220804/DD 2204 799 408
LQE221004/DD 2204 999 408
LQE221204/DD 2204 1199 408
LQE220806/DD 2204 799 608
LQE221006/DD 2204 999 608
LQE221206/DD 2204 1199 608
LQE220808/DD 2204 799 808
LQE221008/DD 2204 999 808
LQE221208/DD 2204 1199 808
Front View
H1
"
"
W1
Additional Dimensions
Front Opening
Height, H2 = (H1 94)Width, W2 = (W1 90)
Side Opening
Height, H2 = (H1 94)
Depth, D2 = (D1 99)
Top Opening
Width, W2 = (W1 90)
Depth, D2 = (D1 99)
Bottom Fixings
Width, W3 = (W1 131)
Depth, D3 = (D1 140)
Top Opening
W1
W2
W3
D1
D2
D3
27
B&R Enclosures iLINQ Catalogue 2011 21For more information visit www.brenclosures.com.au/lqdde.htm
Double Door Enclosure
Detail
D1
D2
D3
W1
W2
W3
H2
Side View
D1
92
-
7/30/2019 Br Enclosures Ilinq Catalogue
24/64
rame eatures
a van se ro orme pro e
High frequency welded
ymme r c a rame
Ideal for custom suites
s a n ess s ee nge p ns
Front access M6 & M8 cage nuts
Materials
a van se s ee
hickness .5mm
Inclusions Symmetrical frame
16 cladding mounts
Stainless steel hinge pins
iLINQ frames are ideal when the enclosures are to be bayed together into a customised suite and are available preassembled.
Doors, side panels, tops, gland plates, plinths and other accessories can be added to the frame so that it is congured to the
specic requirements of the application.
brenclosures.com.au/lqf.htm
Frame
22 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
25/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
2200mm High
Catalogue No
Height Width Depth
H1 W1 D1
LQF220404 2199 399 399
LQF220604 2199 599 399
LQF220804 2199 799 399
LQF221004 2199 999 399
LQF221204 2199 1199 399
LQF220606 2199 599 599
LQF220806 2199 799 599
LQF221006 2199 999 599
LQF221206 2199 1199 599
LQF220808 2199 799 799
LQF221008 2199 999 799
LQF221208 2199 1199 799
1800mm HighHeight Width Depth
Catalogue No H1 W1 D1
LQF180404 1799 399 399
LQF180604 1799 599 399
LQF180804 1799 799 399
LQF181004 1799 999 399
LQF181204 1799 1199 399
LQF180606 1799 599 599
LQF180806 1799 799 599
LQF181006 1799 999 599
LQF181206 1799 1199 599
LQF180808 1799 799 799
LQF181008 1799 999 799
LQF181208 1799 1199 799
2000mm HighHeight Width Depth
Catalogue No H1 W1 D1
LQF200404 1999 399 399
LQF200604 1999 599 399
LQF200804 1999 799 399
LQF201004 1999 999 399
LQF201204 1999 1199 399
LQF200606 1999 599 599
LQF200806 1999 799 599
LQF201006 1999 999 599
LQF201206 1999 1199 599
LQF200808 1999 799 799
LQF201008 1999 999 799
LQF201208 1999 1199 799
Side View
D1
H2
B&R Enclosures iLINQ Catalogue 2011 23For more information visit www.brenclosures.com.au/lqf.htm
Frame
Additional Dimensions
Front Opening
Height, H2 = (H1 94)Width, W2 = (W1 90)
Side Opening
Height, H2 = (H1 94)
Depth, D2 = (D1 94)
Top Opening
Width, W2 = (W1 90)
Depth, D2 = (D1 90)
Bottom Fixings
Width, W3 = (W1 131)
Depth, D3 = (D1 131)
Top Opening
W1
W2
W3
D1
D2
D3
27
Detail
D1
D2
D3
W1
W2
W3
Front View
W1
H1
-
7/30/2019 Br Enclosures Ilinq Catalogue
26/64
ng e oor eatures
uppor oa s o g
4 hinge and locking points
u a e or enc osures o mm w e
Quick & easy installation
Materials
Body zinc coated steel
c ness .6mm
Gasket polyurethane foamed in place
Surface nish powdercoated RAL7035
Inclusions
Symmetrical door
19 x 19mm door stiffener rails
4 hinge and locking points
7mm square quarter turn lock
Earth strap kit
iLINQ doors can be tted on any vertical surface of the frame, front, rear or either side in right or left hand congurations.They
are available in a variety of styles to suit the application including:
Doors tted with windows (indicated by /W on the part number)
Vented doors (indicated by /V on the part number)
All iLINQ doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter
turn locking system with a 7mm square insert. Standard single doors can be tted in minutes to all four sides of the frame in
every combination of left or right hand hinge. Single doors are suitable for enclosures up to 800mm wide.
A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit
can be purchased seperately. Two M6 earth studs are included.
See page 26 for information on double doors.
brenclosures.com.au/lqsd.htm
Single Door
24 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
27/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Single Door
Catalogue No
External
Single Door
Door Rail
Fixing Points
Internal
Stiffener Rail Window SizeHeight Width Height Width Height Width Height Width
Solid Door Window Door Vented Door H1 W1 H2 W2 H3 W3 H4 W4
LQD1804 1758 358 1669 269 1650 250
LQD1806 LQD1806/W LQD1806/V 1758 558 1669 469 1650 450 1620 420
LQD1808 LQD1808/W LQD1808/V 1758 758 1669 669 1650 650 1620 620
LQD2004 1958 358 1869 269 1850 250
LQD2006 LQD2006/W LQD2006/V 1958 558 1869 469 1850 450 1820 420
LQD2008 LQD2008/W LQD2008/V 1958 758 1869 669 1850 650 1820 620
LQD2204 2158 358 2069 269 2050 250
LQD2206 LQD2206/W LQD2206/V 2158 558 2069 469 2050 450 2020 420
LQD2208 LQD2208/W LQD2208/V 2158 758 2069 669 2050 650 2020 620
W1
W2
W3
W4
H2
H3
H4
Internal View
60
49
55
55
Side View
H1
17
27
B&R Enclosures iLINQ Catalogue 2011 25For more information visit www.brenclosures.com.au/lqsd.htm
Front View
W1
H1
"
"
Single Door
-
7/30/2019 Br Enclosures Ilinq Catalogue
28/64
iLINQ double doors can be tted to any vertical surface of the frame, front, rear or either side. They are available in a variety of
styles to suit the application including:
Doors tted with windows (indicated by /W on the part number)
Vented doors (indicated by /V on the part number)
All iLINQ doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter
turn locking system with a 7 mm square insert. Standard double doors can be tted in minutes to all four sides of the frame in
every combination of left and right hand hinge. Double doors are available as an option for 600mm wide enclosures.
A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit
can be purchased seperately. Two M6 earth studs on each door are included.
See page 24 for information on single doors.
Inclusions
Symmetrical door with mullion rst closing
Symmetrical door with lock second closing
19 x 19mm door stiffener rail
4 hinge and 2 locking points on rst closing door
4 hinge and locking points on second closing door
7mm square quarter turn lock
Earth strap kit
ou e oor eatures
uppor oa s o g
4 hinge and locking points
u a e or enc osures mm an w er
Quick & easy installation
Materials
Body Zinc coated steel
c ness .6mm
Gasket polyurethane foamed in place
Surface nish powdercoated RAL7035
brenclosures.com.au/lqdd.htm
Double Door
26 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
29/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Double Door
Catalogue No
ExternalDouble Doors
Stiffener RailFixing Points
InternalStiffener Rail Window Size
Height Width Height Width Height Width Height Width
Solid Door Window Door Vented Door H1 W1 H2 W2 H3 W3 H4 W4
LQDD1808 1758 758 1669 269 1650 250
LQDD1810 LQDD1810/W LQDD1810/V 1758 958 1669 369 1650 350 1620 320
LQDD1812 LQDD1812/W LQDD1812/V 1758 1158 1669 469 1650 450 1620 420
LQDD2008 1958 758 1869 269 1850 250
LQDD2010 LQDD2010/W LQDD2010/V 1958 958 1869 369 1850 350 1820 320
LQDD2012 LQDD2012/W LQDD2012/V 1958 1158 1869 469 1850 450 1820 420
LQDD2208 2158 758 2069 269 2050 250
LQDD2210 LQDD2210/W LQDD2210/V 2158 958 2069 369 2050 350 2020 320
LQDD2212 LQDD2212/W LQDD2212/V 2158 1158 2069 469 2050 450 2020 420
Front View
H1
"
"
W1
W1
W3
W2
W4
W3
W2
W4
Side View
H1
17
27
B&R Enclosures iLINQ Catalogue 2011 27For more information visit www.brenclosures.com.au/lqdd.htm
Internal View
65
65
55
55
H3
H4
H2
Double Door
-
7/30/2019 Br Enclosures Ilinq Catalogue
30/64
a ng eatures
o ver ca rame sur ace
Option of xed hinged cladding
uppor s oa s o o g
a er a s
Body zinc coated steel
Thickness 1.6mm
as e po yur e ane oame n p ace
ur ace n s pow ercoa e
iLINQ cladding panels can be tted on any vertical surface of the frame, front, rear or either side. They are available in two
congurations:
Fixed Screw xed to 8 hinge/cladding points assembled on the frame.
Hinged Screw xed to one side and hinged on the other.
iLINQ panels will support loads of up to 100kg.
Two M6 earth studs are included.
Inclusions (Fixed)
Symmetrical xed panel
Eight M6 x 12 button head hex drive set screws
Earth strap kit
Inclusions (Hinged)
Symmetrical hinged panel
Four M6 x 12 button head hex drive set screws
4 hinges
Earth strap kit
brenclosures.com.au/lqc.htm
Cladding
28 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
31/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Cladding
Catalogue No
External
Height Width
Fixed Panel Hinged Panel H1 W1
LQCF1804 LQCP1804 1758 357LQCF1806 LQCP1806 1758 557
LQCF1808 LQCP1808 1758 757
LQCF1810 LQCP1810 1758 957
LQCF1812 LQCP1812 1758 1157
LQCF2004 LQCP2004 1958 357
LQCF2006 LQCP2006 1958 557
LQCF2008 LQCP2008 1958 757
LQCF2010 LQCP2010 1958 957
LQCF2012 LQCP2012 1958 1157
LQCF2204 LQCP2204 2158 357
LQCF2206 LQCP2206 2158 557
LQCF2208 LQCP2208 2158 757
LQCF2210 LQCP2210 2158 957
LQCF2212 LQCP2212 2158 1157
Fixed
Side ViewFront View Side View
H1
W1
Hinged
Front View
H1
W1
15
15
B&R Enclosures iLINQ Catalogue 2011 29For more information visit www.brenclosures.com.au/lqc.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
32/64
op over eatures
a ven e op ons ava a e
4 M12 Eyebolts (at top)
Materials
inc coated steel
c ness . mm
Gasket polyurethane foamed in place
Surface nish powdercoated RAL7035
iLINQ top covers are available in two variations at or vented.
Flat top covers are used for sealing the top of the enclosure and come with four M12 eyebolts for lifting (SWL 1360kg). They
come complete with all xings required for installation and two M6 earth studs.
Vented top covers are typically used when the enclosure is positioned in a controlled environment and additional cooling air ow
is required. They come complete with all xings required for installation and two M6 earth studs (vented option does not come
with M12 eyebolts). A gland plate system can also be used on the top of the frame, if required.
Refer to page 32 for information on gland plate systems.
Inclusions (Flat Top Cover)
Symmetrical at top
4 x M12 eyebolts
Sealing washers
4 x internal tube nut xings
(Double door enclosures have 6 xing points)
Earth strap kit All xings
Inclusions (Vented Top Cover)
Symmetrical vented top
4 x M8 x 50 hexagonal spacers
8 x M8 x 25 button head hex drive set screws
8 x M8 star washers
Earth strap kit
All xings
brenclosures.com.au/lqtc.htm
Top Cover
30 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
33/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Top Cover
Catalogue No
External Fixing Position
Width Depth Width Depth
Flat Vented W1 D1 W2 D2
LQTF0404 LQTV0404 399 399 292 292
LQTF0604 LQTV0604 599 399 492 292
LQTF0804 LQTV0804 799 399 692 292
LQTF1004 LQTV1004 999 399 892 292
LQTF1204 LQTV1204 1199 399 1092 292
LQTF0606 LQTV0606 599 599 492 492
LQTF0806 LQTV0806 799 599 692 492
LQTF1006 LQTV1006 999 599 892 492
LQTF1206 LQTV1206 1199 599 1092 492
LQTF0808 LQTV0808 799 799 692 692
LQTF1008 LQTV1008 999 799 892 692
LQTF1208 LQTV1208 1199 799 1092 692
Side View
Flat
Top View
D1
D2
24
W1
W2
Side View
Vented
D1
D
2
Top View
50
W1
W2
B&R Enclosures iLINQ Catalogue 2011 31For more information visit www.brenclosures.com.au/lqtc.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
34/64
Gland System Features
Fitted internally or externally into top or
bottom of frame
arge g an ng
Easy when tting removing
va a e con gure or spec a
applications
Materials
rame a umn um ex rus on
Gasket closed cell neoprene
a e op ons
1.6mm galvanised steel
3mm brassmm a u m n um
Inclusions (Gland Kit) Symmetrical extruded aluminium frame
Symmetrical 1.6 mm galvanised steel gland plates
1000mm & 1200mm wide 2 xed gland plates and centre mullion.
All xings
Inclusions (Gland Plates)
Symmetrical gland plate in selected material
All xings
NOTE: Gland frame puchased separately
Inclusions (Gland Frame)
Symmetrical extruded aluminium frame
All xings
NOTE: Gland plates puchased separately
The iLINQ gland plate kit consists of an extruded aluminium frame tted with a xed 1.6 mm galvanised steel gland plate. To
build a customised gland plate system the frame and optional gland plate material can be purchased separately and congured
to suit the application.
brenclosures.com.au/lqgpf.htm
Gland Plate and Frame
32 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
35/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Gland Plate & Frame
Gland Plate Kit Gland FrameGland Plate1.6 mm steel
Gland Plate6mm Aluminium
Gland Plate3 mm Brass
Opening Size Plate Size
Width Depth Width Depth
W1 D1 W2 D2
LQGK0404 LQGF0404 LQGP0404 LQGP0404/A6 LQGP0404/B3 243 243 270 270
LQGK0604 LQGF0604 LQGP0604 LQGP0604/A6 LQGP0604/B3 443 243 470 270
LQGK0804 LQGF0804 LQGP0804 LQGP0804/A6 LQGP0804/B3 643 243 670 270
LQGK1004 LQGF1004 LQGP1004 LQGP1004/A6 LQGP1004/B3 843 243 870 270
LQGK1204 LQGF1204 LQGP1204 LQGP1204/A6 LQGP1204/B3 1043 243 1070 270
LQGK0606 LQGF0606 LQGP0606 LQGP0606/A6 LQGP0606/B3 443 443 470 470
LQGK0806 LQGF0806 LQGP0806 LQGP0806/A6 LQGP0806/B3 643 443 670 470
LQGK1006 LQGF1006 LQGP1006 LQGP1006/A6 LQGP1006/B3 843 443 870 470
LQGK1206 LQGF1206 LQGP1206 LQGP1206/A6 LQGP1206/B3 1043 443 1070 470
LQGK0808 LQGF0808 LQGP0808 LQGP0808/A6 LQGP0808/B3 643 643 670 670
LQGK1008 LQGF1008 LQGP1008 LQGP1008/A6 LQGP1008/B3 843 643 870 670
LQGK1208 LQGF1208 LQGP1208 LQGP1208/A6 LQGP1208/B3 1043 643 1070 670
Gland Frame
Top View
D1
Side View
26
W1
Gland Plate
Top View
D2
W2
B&R Enclosures iLINQ Catalogue 2011 33For more information visit www.brenclosures.com.au/lqgpf.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
36/64
usta e an ateeatures
e n erna y ex erna y n o op
o om o rame
Large glanding area
asy w en ng remov ng
Available as a kit
Materials
rame a umn um ex rus on
Plate 1.6mm galvanised steel
Gasket closed cell neoprene or
oame n p ace poyure ane
Inclusions
Extruded aluminium frame
1.6mm steel gland plates (see page 35 for quantities)
All xings
iLINQ adjustable gland plate systems are optional in enclosures 600mm (depth or width) and above. Gland plates can be tted
either internally or externally into the bottom or top of new or existing enclosures. The adjustable gland plate kit is supplied with
an extruded aluminium frame and one set of 3 plates (2 xed, 1 sliding) of 1.6mm galvanised steel for 600mm and 800mm wide
frames and 2 sets for 1000mm and 1200mm wide frames.
The sliding plate can be adjusted to form an opening or removed to punch holes as required. The plates are secured by serrated
clamp nuts for effective earthing.
brenclosures.com.au/lqagp.htm
Adjustable Gland Plate System
34 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
37/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Adjustable Gland Plate System
Gland Plate Kit Number of plates
Opening Size Overall Plate Size
Individual
PlateWidth Depth Width Depth Depth
W2 D2 W1 D1 D3
LQGK0606/GA 3 443 443 470 470 166
LQGK0806/GA 3 643 443 670 470 166
LQGK1006/GA 6 843 443 870 470 166
LQGK1206/GA 6 1043 443 1070 470 166
LQGK0608/GA 3 443 643 470 670 266
LQGK0808/GA 3 643 643 670 670 266
LQGK1008/GA 6 843 643 870 670 266
LQGK1208/GA 6 1043 643 1070 670 266
Accessories Description
LQGN Clamp nut for xing gland plates to frame
Top View
W1
W2
D1
D2
B&R Enclosures iLINQ Catalogue 2011 35For more information visit www.brenclosures.com.au/lqagp.htm
Gland Frame
Individual Plate
W1
D3
Side Plate
16
14
-
7/30/2019 Br Enclosures Ilinq Catalogue
38/64
Metal mounting pans are manufactured from 3mm galvanised steel and are stiffened to support loads of up to 500kg. They are
depth adjustable in 25mm increments and can be installed using slides that locate the pan into the correct position for mounting
to the frame. Mounting pans can be mounted off any prole using the same mounting pan bracket and xings. In bayed
enclosure systems a mounting pan inll panel is available to ll the space between the mounting pans. The mounting pan inll
brackets can be mounted on either horizontal or vertical frame prole rails.
brenclosures.com.au/lqmp.htm
Mounting Pan
ount ng an eatures ene o suppor oa o o g
Depth adjustable
n pane ava a e or aye enc osures
a er a s
Body galvanised steel
hickness 3mm
rac e s z nc a oy
Inclusions (Mounting Pan)
Summetrical 3mm galvanised steel mounting pan
4 mounting brackets
All xings
Inclusions(InfllPanel)
Summetrical 3mm galvanised steel mounting pan
2 mounting brackets
All xings
36 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
39/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Mounting Pan
Catalogue No.
Size Fixings
Height Width Height Width
H1 W1 H2 W2
LQMP1804 1675 275 1649 249
LQMP1806 1675 475 1649 449
LQMP1808 1675 675 1649 649
LQMP1810 1675 875 1649 849LQMP1812 1675 1075 1649 1049
LQMP2004 1875 275 1849 249
LQMP2006 1875 475 1849 449
LQMP2008 1875 675 1849 649
LQMP2010 1875 875 1849 849
LQMP2012 1875 1075 1849 1049
LQMP2204 2075 275 2049 249
LQMP2206 2075 475 2049 449
LQMP2208 2075 675 2049 649
LQMP2210 2075 875 2049 849
LQMP2212 2075 1075 2049 1049
MountingPanInfllPanel(for bayed systems)
Catalogue No.
Size
Height
H1
LQMF1801 1675
LQMF2001 1875
LQMF2201 2075
Mounting Pan Inll Panel
Front View
124
H1
Front View
W1
W2
H1
H2
B&R Enclosures iLINQ Catalogue 201 37For more information visit www.brenclosures.com.au/lqmp.htm
Side View
27
25
Side View
-
7/30/2019 Br Enclosures Ilinq Catalogue
40/64
w ng rame eatures
u a e or moun ng equ pmen
Allows to equipment
u a e or oa s o o g w en
installed internally
Suitable for loads of o 80kg when
ns a e ex erna y
a er a s
Frame 76 38mmRHS
Thickness 2.5 mm
iLINQ swing frames are used to install 19" rack mounted equipment which allows access to both the front and rear without
having to remove or open cladding on the side or back of the enclosure. The swing frames are very robust, constructed from
76 x 38 x 2.5 mm RHS and are suitable for loads of up to 100kg when installed internally or 80kg when installed externally.
A horizontal swing frame rail set is required to mount the swing frame which are available in widths to suit the enclosure
(purchased seperately).
There are two mounting positions internal 135and external 180. The internal position is suitable for heavy equipment(100kg) and can be swung up to 135. The external position is rated to carry slightly lower weights (80kg), but swings out to a
full 180. This gives unrestricted access to the inside of the enclosure.
For 800mm and wider enclosures, a swing frame trim (refer to page 40) is available to suit installation of the swing frame in
either the centre, left or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations
and two symmetrical panels for centre installation. The trim panels are constructed from 1.6mm zinc coated steel powdercoated
mist blue (white) gloss and are attached to the swing frame using the xings supplied.
Inclusions (19" Swing Frame)
Swing frame 2 x slotted turnbuckle locks
RU indicator tape
All xings
NOTE: Horizontal swing frame rails purchased separately
brenclosures.com.au/lqsf.htm
Swing Frames
38 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
41/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Horizontal Swing Frame Rails
Catalogue No.
Width Fixing WidthTo Fit FrameWidth (mm)W1 W2
LQRF06 551 538 600
LQRF08 751 738 800
19" Swing Frame
Catalogue No.
HeightTo Fit FrameHeight (mm)H1 RU
LQSF36U 1694 1800 36
LQSF40U 1894 2000 40
LQSF45U 2094 2200 45
19" Swing Frame 135
Front View
497
H1
Side View
113
76
19" Swing Frame 180497
Front View
H1
Side View
113
76
22
Horizontal Swing Frame Rails
Front View
W1
20
Top View
105
W1
W2
B&R Enclosures iLINQ Catalogue 2011 39For more information visit www.brenclosures.com.au/lqsf.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
42/64
w ng rame r ms
eatures Symmetrical pane s
Side mount or centre mount
Materials
nc coa e s ee
Thickness 1.6
Surface nish powdercoated
For enclosures 800mm and wider, a swing frame trim is available to suit the installation of a swing frame in either the centre, left
or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations and two symmetrical
panels for centre installation. The trims are constructed from 1.6mm zinc coated steel powdercoated mist blue (white) gloss.
Trims are securely xed to the swing frame and help direct airow through the 19" rack mounted equipment. The trims also
assist to make the equipment mounted to the rear of the swing frame secure.
Inclusions (Centre Mount)
Symmetrical swing frame trims (2)
All xings
Inclusions (Side Mount)
Symmetrical swing frame trim
All xings
Note: Image shows centre mount trim
brenclosures.com.au/lqsft.htm
Swing Frame Trims
40 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
43/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Swing Frame Trim - Side
Catalogue No.
HeightTo Fit Swing
Frame RUH1
LQSS36U08 1694 36
LQSS40U08 1894 40
LQSS45U08 2094 45
Front View Top View
Swing Frame Trims Centre (2)
Swing Frame Trims - Centre (2)
Catalogue No.
HeightTo Fit Swing
Frame RUH1
LQSC36U08 1694 36
LQSC40U08 1894 40
LQSC45U08 2094 45
Front View
Swing Frame Trim Side
Top View
H1
H1
207
99
99
207
B&R Enclosures iLINQ Catalogue 2011 41For more information visit www.brenclosures.com.au/lqsft.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
44/64
19" ac a eatures
Rails are EIA-10-D compliant
Easy identifable RU positioning
Supplied as a pair
Square holes punched a RU
ncremen s
a er a s
Zinc coated steel
Thickness 2.0mm
19" rack rails are supplied as a pair (one left and one right) with all xings included and are made from 2mm zinc coated steel
powdercoated mist blue (white) gloss. The rails are EIA-10-D compliant with square holes punched at RU increments suitable
for standard rear access cage nuts.
Matrix rails are required to mount the 19 rack rails and are purchased seperately.
Inclusions
Left and right rails (2)
RU indicator tape
All xings
NOTE: Matrix rails purchased separately
19" Rack Rails
brenclosures.com.au/lqrr.htm
42 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
45/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
19" Rack Rails 600mm wide
H1
19" Rack Rails 800mm wide
H1
19" Rack Rails 600mm wide
Catalogue No.
HeightTo Fit FrameHeight (mm)
To Suit EnclosureWidth (mm)
#Min. No ofmatrix railsH1 RU
LQRR38U 1700 1800 600 38 3
LQRR42U 1900 2000 600 42 3
LQRR47U 2100 2200 600 47 3
# For matrix rails refer to pages 44 45.
19" Rack Rails 800mm wide
Catalogue No.
HeightTo Fit FrameHeight (mm)
To Suit EnclosureWidth (mm)
#Min. No ofmatrix railsH1 RU
LQRR38U/800 1700 1800 800 38 3
LQRR42U/800 1900 2000 800 42 3
LQRR47U/800 2100 2200 800 47 3
# For matrix rails refer to pages 44 45.
B&R Enclosures iLINQ Catalogue 2011 43For more information visit www.brenclosures.com.au/lqrr.htm
Front View Front View
-
7/30/2019 Br Enclosures Ilinq Catalogue
46/64
nterna a eatures
a r x a su a e or eav er
complex congurations, mountable in
direction
Prole Rails suitable for mounting
g er componen s
oor a s n o e s en ng rame
on he internal side of the door
Materials
Matrix Rail galvanised steel
Dimensions 19 1.6mm
Prole Rail zinc coated steel
mens ons . mm
25x18x1.6mm
oor a z n c coa e s ee Dimensions 9 18 1.6mm
Surface nish prole & door rail
powdercoated
A matrix rail is typically used for heavier or complex congurations. It can be mounted to the frame prole, to other rails and any
combination of frame and rails in any direction height, width or depth. Accessories and equipment can be tted to the matrix
rails by using front access cage nuts (M6 or M8) or M5 taptites at 25mm increments. Matrix rail is supplied in 21 sizes in 100mm
increments to suit standard iLINQ frame dimensions.
Prole rails are typically used to hold lighter items in the enclosure and it is suitable for front access cage nuts (M6 or M8) or
M5 taptites. The prole rail is self aligning and ts between the frame prole of the enclosure and is secured by M5 taptites. Theprole rails are available in both 25mm and 50mm sizes to suit all enclosure depths only.
A door rail is used for supporting any door mounted equipment and are secured to the door stiffener rail with M5 taptites. Door
rails are supplied in all door widths. Prole rails and door rails are powdercoated mist blue (white) gloss.
brenclosures.com.au/lqirs.htm
Inclusions (Matrix Rail)
Symmetrical matrix rail
Die cast ends (2)
All xings
Inclusions(ProfleRail)
Symmetrical prole rail
All xings
Inclusions (Door Rail)
Symmetrical door rail
All xings
NOTE: Front access cage nuts for all rails purchased separately (refer to page 17)
Internal Rail System (IRS)
44 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
47/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Matrix Rail
Catalogue No.
WidthTo suit
Frame SizeW1
LQRM01 119
LQRM02 219
LQRM03 319 400
LQRM04 419 LQRM05 519 600
LQRM06 619
LQRM07 719 800
LQRM08 819
LQRM09 919 1000
LQRM10 1019
LQRM11 1119 1200
LQRM12 1219
LQRM13 1319
LQRM14 1419
LQRM15 1519
LQRM16 1619
LQRM17 1719 1800
LQRM18 1819
LQRM19 1919 2000
LQRM20 2019
LQRM21 2119 2200
Door Rail
Catalogue No.
Width FixingTo suit
Door WidthW1 W2
LQRD04 288 268 400
LQRD05 388 368 500
LQRD06 488 468 600
LQRD08 688 668 800
25mmProfleRail
Catalogue No.
Width FixingsTo suit
Frame SizeW1 W2
LQRP04/25 358 338 400
LQRP06/25 558 538 600
LQRP08/25 758 738 800
50mmProfleRail
Catalogue No.
Width FixingsTo suit
Frame SizeW1 W2
LQRP04/50 358 338 400
LQRP06/50 558 538 600
LQRP08/50 758 738 800
Front View
Matrix RailW1
75
25
Side View
22
Side View
18
Side View
25 mm Prole Rail
Front View
W1
W2
25
50 mm Prole Rail
W1
W2
Front View
50
18
Door Rail
Front View
W1
W2
25
Side View
18
Matrix Rail Detail
75
25
25
11
5.5
13
4.5
8
B&R Enclosures iLINQ Catalogue 2011 45For more information visit www.brenclosures.com.au/lqirs.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
48/64
nge scutc eon
eatures Suitable for oa s of o g
Slotted cam locks (2)
ecesse an e
a er a s
Zinc coated steel
Thickness 1.6mm
ur ace n s pow ercoa e
The iLINQ hinged escutcheon is manufactured from 1.6mm zinc coated steel and is suitable for loads of up to 25kg. The
escutcheon is powdercoated mist blue (white) gloss. It is supplied with all xings necessary for installation onto the escutcheon
rail. Vertical hinged escutcheon rails are required when tting escutcheons.
To comply with IEC60529 IP2X specications, horizontal rails can be used. All escutcheon rails are powdercoated mist blue
(white) gloss.
brenclosures.com.au/lqhe.htm
Hinged Escutcheon
Inclusions (Matrix Rail)
Symmetrical Escutcheon
2 x turn slotted locks
All xings
NOTE: Vertical and horizontal escutcheon rails purchased separately
46 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
49/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Hinged Escutcheon
Catalogue No.
Escutcheon Locking
Height Width Height Suits
H1 W1 H2 Height Width
LQHE1706 1700 500 1646 1800 600
LQHE1708 1700 700 1646 1800 800
LQHE1906 1900 500 1846 2000 600
LQHE1908 1900 700 1846 2000 800
LQHE2106 2100 500 2046 2200 600
LQHE2108 2100 700 2046 2200 800
Vertical Rail (2)
Catalogue No.
Height
H1 Suits Height
LQRV17 1758 1800
LQRV19 1958 2000
LQRV21 2158 2200
Escutcheon Vertical Rail (2) Horizontal Rail (2) Optional
Horizontal Rail (2)
Catalogue No.
Width
Suits WidthW1
LQRH06 505 600
LQRH08 705 800
Note: Horizontal rails required for IP2X applications.
W1 18
H1
W1
H1
"
"
H2
B&R Enclosures iLINQ Catalogue 2011 47For more information visit www.brenclosures.com.au/lqhe.htm
Front View Side View
Top View
Bottom View
-
7/30/2019 Br Enclosures Ilinq Catalogue
50/64
nt t eatures
ecas p eces
Multiple xing points
eve ng ee
Easy access o he bottom of the
enclosure
Frontcladding
Option of solid vented
Access for pipe lifting
Option of 100mm 200mm high
Materials
Plinth feet ZA27 diecastn c a ng z nc coa e s ee
Thickness 1.2mm
Surface nish powdercoated
iLINQ plinths are designed to raise the enclosure off the oor to allow access to cabling. The plinth kit includes 4 diecast corner
feet (200mm high plinths use 8 corner feet) and 2 covers for the front and rear, 4 levelling feet and all xings. For vented plinth
applications use sufx /V when ordering.
Plinth cladding features 40mm pipe lifting access holes and plugs and are held in place with two M5 button head hex drive set
screws.
Plinth feet and covers are powdercoated textured matt black.
brenclosures.com.au/lqpk.htm
Plinth Kit
Inclusions
4 diecast corner feet on 100mm high plinths
8 diecast corner feet on 200mm high plinths
Levelling feet (4)
4 Plinth foot corner covers (8 required on 200mm high)
Front & rear cladding
All xings
48 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
51/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
100mm Plinth KitsCatalogue No Plinth Kits 100mm high Fixing Dimensions
Solid Vented H1 W1 W2 W3
LQP0104 LQP0104/V 100 396 372 199
LQP0106 LQP0106/V 100 596 572 399
LQP0108 LQP0108/V 100 796 772 599
LQP0110 LQP0110/V 100 996 972 799
LQP0112 LQP0112/V 100 1196 1172 999
200mm Plinth KitsCatalogue No Plinth Kits 200mm high Fixing Dimensions
Solid Vented H1 W1 W2 W3
LQP0204 LQP0204/V 200 396 372 199
LQP0206 LQP0206/V 200 596 572 399
LQP0208 LQP0208/V 200 796 772 599
LQP0210 LQP0210/V 200 996 972 799
LQP0212 LQP0212/V 200 1196 1172 999
Solid Plinth Kit
Vented Plinth Kit
Side View
H1
W1
Front View
H1
W1
Top View
W1
W3
Top View
W1
W2
W3
B&R Enclosures iLINQ Catalogue 2011 49For more information visit www.brenclosures.com.au/lqpk.htm
-
7/30/2019 Br Enclosures Ilinq Catalogue
52/64
nt a ng eatures
asy o e o om o e
enclosure
Access for pipe lifting
Option of solid or vented
Option of 100mm 200mm high
Materials
Zinc coated steel
c ness . mm
ur ace n s pow ercoa e
Plinth cladding is available in 100mm and 200mm high options with 40mm pipe lifting access holes and plugs. Cladding is
manufactured from 1.2mm zinc coated steel and is powdercoated textured matt black.
Available in solid or vented options, the plinth cladding is held in place with two M5 button head hex drive set screws.
brenclosures.com.au/lqpc.htm
Plinth Cladding
Inclusions
Plinth cladding (1)
All xings
50 Product Information
-
7/30/2019 Br Enclosures Ilinq Catalogue
53/64
Introduction
SizeSelectionCharts
ProductInformation
TechnicalGuide
Plinth Cladding - 100mm highCladding 100 mm high
Catalogue No Height Width
Solid Vented H1 W1
LQPC0104 LQPC0104/V 111 277
LQPC0106 LQPC0106/V 111 477
LQPC0108 LQPC0108/V 111 677
LQPC0110 LQPC0110/V 111 877
LQPC0112 LQPC0112/V 111 1077
Plinth AccessoriesProduct Code Description
LQPF Die-cast corner foot kit (4)
LQPS02 Plinth stacking kit for 200 mm high plinths
Plinth Cladding - 200mm highCladding 200mm high
Catalogue No Height Width
Solid Vented H1 W1
LQPC0204 LQPC0204/V 211 277
LQPC0206 LQPC0206/V 211 477
LQPC0208 LQPC0208/V 211 677
LQPC0210 LQPC0210/V 211 877
LQPC0212 LQPC0212/V 211 1077
Solid Plinth Cladding
Vented Plinth Cladding
LQPF
Front View
H1
W1
Front View
H1
W1
B&R Enclosures iLINQ Catalogue 2011 51For more information visit www.brenclosures.com.au/lqpc.htm
LQPS02
-
7/30/2019 Br Enclosures Ilinq Catalogue
54/64
nt ount ng ase
eatures Suitable for ns a a on a p pe ro ers
Access for pipe lifting
eavy u y
ron
Materials
Galvanised steel
c ness mm