U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

MERIDIANT r a n s m i t t e r s

R e v o l u t i o n i s e t h e w a y y o u w o r k

Features

• Zero frame delay• HDSDI, SDI, component, composite video input• Extremely high quality 4:2:2 video • 5.1 - 5.9GHz licence and licence exempt band• Secure encrypted transmission in unicast mode• Removable antennas • Lightweight design• Switch between Anton Bauer and V-Lok plates

Specifications

Latency: <1 millisecondVideo Input: SDI, HD-SDI, component, composite Format: SDI, PAL, NTSC. HD-SDI up to 1080i 60Audio Output: 2 channels embedded or balanced analogue line levelTransmission Method: Pixel Prioritisation ProtocolTime Code: Embedded time code transported over link RF Power Output: Up to 100mWModulation: OFDMBandwidth: 20MHzFrequency: 5.1 - 5.9GHzSecurity: 256 bit encryption AES Firmware: Upgradable via USBAntennas: 4 x RP-TNC and 1 x RP-SMA (return data)Control: Configuration via LCD touch screen Power: 6.5 - 18V DC 9 Watts on 4 pin Hirose or battery plateMounting: Anton Bauer or V-Lok plates / no platesSize: Approx. 155mm x 145mm x 38mmTemperature Range: -5° to 50° C Made in: United Kingdom

The Meridian wireless microwave broadcast system is designed for high quality, uncompressed zero delay HD and SD live transmission, where extremely low latency is essential.

Meridian transmitters have been specifically designed to be lightweight, compact and are available with either an Anton Bauer, V-lok battery mount, or without battery plates for mounting to a DV, Red or film camera.

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

MERIDIANB r o a d c a s t R e c e i v e r

R e v o l u t i o n i s e t h e w a y y o u w o r k

Meridian broadcast receivers use an array of 5 receive antennas to enhance performance and reliability. With a range of accessories developed for performance and flexibility, this receiver can be tailored to meet a variety of production requirements. The Meridian receiver is ideal for multi camera production, sporting arenas, stage and studio productions, and live-to-air broadcasts.

Standard Features• Zero frame latency (<1 millisecond)• 5.1-5.9GHz licence, and licence exempt band• Extremely high quality 4:2:2 video transmission• Embedded time code transport• Manual or automatic channel select• Switch between multiple cameras• Secure encrypted transmission in unicast mode• Simultaneous HD down-converter/scaler• Signal strength meter on each antenna

Specifications Latency: <1 millisecond / 1 frame when GenlockedVideo Output: SDI, HDSDI, component SD/HD, compositeFormat: SDI, PAL, NTSC. HDSDI up to 1080iAudio Output: Embedded and 2 channels balanced analogue line level Down-converter: Any HD format simultaneously converted to PAL or NTSCTime Code: Embedded time code transported over linkTransmission Method: Pixel Prioritisation ProtocolModulation: OFDMBandwidth: 20MHzFrequency: 5.1-5.9GHzAntennas: 7 antenna array. 5 receive, 1 spectrum analyser, 1 return dataSecurity: 256 bit encryption AES in unicastFirmware: Upgradable via USB portRange: Up to 200 metres line of sightChannel Select: Automatic or manualControl: Configuration via LCD touch padPower: 6.5 -18V DC, 4 pin XLR, 9 wattsAntenna Ports: N-typeTemperature Range: -5° to 50° CMounting: Light stand spigot or 1 unit rack mountMade in: United Kingdom

Options• Daisy-chain multiple receivers to increase range and coverage• Lens Iris control• Tally light relay – preview/programme• Built-in spectrum analyser• Genlock

MERIDIANP o r t a b l e R e c e i v e r

R e v o l u t i o n i s e t h e w a y y o u w o r k

Features

• Zero frame latency (<1 millisecond)• 5.1-5.9GHz licence, and licence exempt band • Extremely high quality 4:2:2 video transmission• Embedded time code transport • Manual or automatic channel select • Switch between multiple cameras • Simultaneous HD downconverter/scaler • Lightweight design• Headphone monitoring

Specifications

Latency: <1 millisecondVideo output: SDI, HDSDI, component SD/HD, composite Format: SDI, PAL, NTSC, HDSDI up to 1080i Audio output: Embedded and 2 channels balanced line analogue level (simultaneous output) 2 headphone monitor outputsDownconvertor: HD format converted to PAL or NTSCTime Code: Embedded time code transported over linkTransmission method: Pixel Prioritisation ProtocolModulation: OFDMBandwidth: 20MHzFrequency: 5.1GHz - 5.9GHzRange: Up to 60 metres with on-board antennas Up to 150 metres with hi-gain antennasAntennas: 5 x RP-SMA connectors Channel select: Automatic or manualFirmware: Upgradable via USB portControl: Configuration via LCD touch screen Power: 6.5 - 18V DC 9 Watts on 4 pin HiroseSize: Approx. 145mm x 155mm x 38mmTemperature Range: -5° to 50° C Made in: United Kingdom

Meridian portable receivers are designed to be lightweight, compact and are available with either an Anton Bauer, V-Lok battery mount or without battery plates. The antenna configuration of the portable receivers allows the operator to utilise a range of different antennas to optimise performance in a variery of environments.

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

MERIDIANF u l l T e l e m e t r y S y s t e m

R e v o l u t i o n i s e t h e w a y y o u w o r k

The latest addition to the Meridian range offers a full telemetry solution using the manufacturer’s original Remote Control Panel (RCP). This bi-directional system enables the RCP to display F-stop and Pedestal level and provides the operator with a very low latency Camera Control solution.

When used in conjunction with Meridian’s zero delay video transmission system, the RCP operator will encounter no perceptible difference between hard-wired and wireless cameras.The Meridian camera control system operates in standalone mode or can be integrated into a multi-camera OB or studio production environment.

HIGHLIGHTS

• Complete wireless camera control solution• Uses camera manufacturer’s original RCP• Bi-directional data shows full feedback display information including F-stop and Pedestal level• Low-latency and long range • High-speed transceivers operate bi-directionally• Robust frequency-hopping/DTS

SPECIFICATIONS

Range: Up to 1 mile

Latency: <30 milliseconds

Frequency: 900 MHz US 2.4 GHz worldwide

Power: Up to 1 watt (adjustable)

Battery Mount: No Plate, V-lok or Anton Bauer

Operating Temperature: -20°C to +45°C (-4°F to +113 °F)

Power Requirements: 120/240 V AC or 12 V DC

Weight: Approx. 2 lb 5 oz (1.05 kg)

Remote: 8-pin

(not included)

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

ZENITH

R e v o l u t i o n i s e t h e w a y y o u w o r k

Features

• 80 milliseconds latency• 5.1 - 5.9GHz license-exempt band (approx. 20 x 10MHz channels available)• Range from camera back transmitter up to 1km • Range (pointo-to-point) up to 5km• 1 - 30Mb encoding bitrate• Configure and monitor statistics via web page using a laptop, iPad©, iPhone©, or other popular portable device • Secure encrypted transmission• LED signal strength meter on transmitter and receiver

Specifications

Latency: 80 millisecondsCompression: H.264Format: SDI, HD-SDI, Composite up to 1080p 60Audio Output: 2 channels embedded or balanced analogue line levelRF Power Output: Up to 500mW adjustableModulation: OFDMBandwidth: 5 - 40MHzFrequency: 5.1 - 5.9GHz Security: 256 bit encryption AES Firmware: Upgradable via Web pageAntenna Port: N-TypeRange: Up to 1km (camera back transmitter) Up to 5km (point-to-point)Temperature Range: -5º to 50º CMade In: United Kingdom

E&OE: Details subject to change. Photos for illustration purposes only.

The Zenith wireless system is designed for wireless ENG and HD live productions where range and signal reliability are essential. The unique network capability of the system allows for an almost infinite shooting area by deployinginexpensive receiver nodes wired with Category-5 cabling.

The bandwith is adjustable (between 5-40MHz) and one of the strengths of the Zenith system is its ability to navigate around interference when operating in “wide-bandwith mode” making the link robust and extremely stable.

Zenith is fully configurable via a Web interface and statistics can be monitored on portable devices (such as an iPhone©) allowing the operator the flexibility to configure the system for optimal HD wireless transmission within any environment.

Zenith provides a scalable modular solution allowing trade offs between budget and performance.

The Cobalt wireless microwave system is a unique solution providing live-to-air microwave links for any camera without ghosting, break-up or interference at a fraction of the cost of traditional digital microwave systems.

With an existing worldwide broadcast user base, the Cobalt consistently provides a cost effectivealternative to COFDM systems.

So far as reliability is concerned, the Cobalt’s unique bi-directional transmission system ensures that each packet of data is acknowledged by the receiver. Thus any lost data can be requested and resent resulting in an extremely robust link.

Robust SD Transmission

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

R e v o l u t i o n i s e t h e w a y y o u w o r k

C O B A LT

Specifications

Video: MPEG-2 standard definition Composite / SDI NTSC / PAL auto select

Latency: 465ms

Audio: 2 channels

Data Rate: Dynamically selects between 4/8/14 Mb/s

Frequency: 5GHz Wi-Fi channels

Transmission Method: OFDM

Transmission Power: 50mW

Range: Outdoors: Up to 1600ft/500m line of sight

Security: AES 128 bit encryption

Channel Select: Automatic. Up to 11 usable channels (4 recommended)

Power: 8-38V DC 6 Watts

Control : Full manual override and configuration via RS-232 port

TX Mounting: V-Lok, Anton Bauer, or no plates

RX Mounting: Light stand mount, diversity antenna

U K H e a d O f f i c e : + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 F a x : + 4 4 ( 0 ) 2 0 7 9 0 0 6 3 5 0 w w w . b o x x . t v s a l e s @ b o x x . t vU K H e a d O f f i c e : + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 F a x : + 4 4 ( 0 ) 2 0 7 9 0 0 6 3 5 0 w w w . b o x x . t v s a l e s @ b o x x . t v

C O B A LTOB Receiver Component Diagram

 

Cobalt Outside Broadcast Receiver RC-0B-11C or RC-OB-11SDI

Antenna 01 Antenna 02 ADP106

CMP003

ST-OB-01

Power Supply (110/240V)

PS1201

Sound Mixer Vision Mixer

Monitor

Composite or SDI

SDI w

ith embedded audio

Battery Mount Transmitter

Camera

Transmitter

Antenna 02 (ADP107)

Antenna 01 (ADP107)

CBL115

Battery

Video Cable

Audio Cable

Analogue A

udio 2

Ana

logu

e A

udio

1 12

V

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • F a x : + 4 4 ( 0 ) 2 0 7 9 0 0 6 3 5 0 • w w w . b o x x . t v • s a l e s @ b o x x . t v

TALLIS OPTION GUIDETally Control Only Tally & Iris Control

TL-TM-2CH

TL-RM-01

TL-TM-5CH

Rec

eive

r Opt

ions

Tran

smitt

er O

ptio

nsA

dditi

onal

Acc

esso

ries

Rec

eive

r Opt

ions

Tran

smitt

er O

ptio

nsA

dditi

onal

Acc

esso

ries

1 x CBL103: 4 pin Hirose to Anton 2 pin power tap cable.

Included Accessories

1 x PS1205: 90-264Vac 50/60Hz - 12V DC 5Amp Power Supply

Included Accessories

TL-TAL-R11 x ANT107: 868MHz or 434MHz antenna short right angle antenna1 x CBL109: 12-pin lens control cable1 x CBL103: 4-pin Hirose to Anton 2-pin power tap cable1 x TL-IR-CTRL: Iris Control Box1 x CBL108: 3-pin XLR female to 3-pin XLR male cable

Included Accessories

TL-TAL-T11 x ANT108: 868MHz long right angle antenna1 x PS1205: 100-240v AC to 12V 2.5 amp adapter. 4-pin XLR1 x ADP109: N-type male to RP- SMA female adaptor

Included Accessories

TL-DV-EXT TL-DV-EXT TL-IR-CTRL1 x TL-IR-CTRL: Iris Control Box is included in the price of a TL-TAL-R1, an additional unit would only need to be ordered as a replacement.

Note

U K H e a d O f f i c e + 4 4 ( 0 ) 8 4 5 6 4 3 2 8 7 4 • w w w . b o x x . t v • s a l e s @ b o x x . t v

CERULEAN

R e v o l u t i o n i s e t h e w a y y o u w o r k

Features

• Operates on the 60GHz license-exempt spectrum• Dual-channel operation supports 3D-HDTV or two single channels uncompressed SMPTE 292M• 2.97Gbps aggregate throughput to 500 metres• Error-free operation including all HDSDI pathological patterns• Dielectrically loaded 5º lens antenna for high signal gain and manageable beam width• Optical sight and RSSI bar graph for confirmation of optimal alignment• Optical interface options available

Specifications

Video/Audio: SMPTE 372M and SMPTE 292MVideo/Audio Inputs: Dual HD-SDI, BNC x 2Aggregate Throughput.: 2.97Gbps, HD-SDI x 2 1.48Gbps, HD-SDIBit Error Rate: < 1 x 10-12

Transport Latency: <2ns (30% < than fibre)Transmitter Power: +10dBm (10mW)Antenna Gain: 35dBi / 5º beam widthOperating Range: 20 - 500 metres (clear to moderate rain)Power: 10.5 - 17 VDC, 15W via XLR4 or V-Mount batteryRegulatory Approvals: FCC Part 15.255, MPT (59-66Ghz) unlicensedEnvironmental: 0º to 65º C, IP65 rated enclosureSize: 240mm x 240mm x 120mmWeight: 5kg

Cerulean delivers the quality and reliability of full HD uncompressed fibre links in a cable free, latency free, error free, wireless environment.

The system utilises the licence-exempt 60GHz spectrum and is capable of sending two independent, uncompressed SMPTE 292M (SMPTE372M) production video streams simultaneously without the need for compression or forward error correction and the associated latency. This product is ideal for multiple camera feeds or as a redundant hot standby installation for critical real-time acquisition.

With a range of up to 500m, Cerulean opens up a host of possibilities in HD uncompressed wireless transport for any production.

B A C K H A U L L I N K