BOXED TOOL SETFOR TIGHTENING POWER TAKE-OFF

AND/ORPOWER TAKE-OFF / HYDRAULIC PUMP UNIT

This crucial boxed tool set has been developed to ensure correct tightening when fitting the hydraulic pump to the PTO and help bodybuilders comply with manufacturers' recommendations on top range and construction site vehicles equipped with ZF 9S 109, 16S 151/181/221 and Astronic Optidriver gearboxes.

The set consists of:- 1 torque wrench calibrated at 70 Nm with setting modification protection.- 1 torque wrench calibrated at 35 Nm with setting modification protection.- 1 special 16 mm adapter.- 1 bevelled adapter of 16 mm.- 1 bevelled adapter of 17 mm.- 1 storage case lined with preformed foam.

Each wrench is supplied with its own calibration certificate.

NOTE:These two wrenches are different from the point of view of overall dimensions and torque range.Bearing in mind the different assemblies and various torques.

IMPORTANT :It is ESSENTIAL to comply with the assembly recommendations described in the technica news / on the web site Bodybuilder " Power take off ".

The boxed set is distributed by the Renault Trucks Spare Parts Department as part N° 50 00 262 743.