bose professional systems division the highest safety

2
NEW! NEW! NEW! NEW! Voice Alarm Control and Indicating Equipment - VACIE The Entero ® ESC emergency system controller is expandable from 4 to 8 or 12 zones by use of 4 x 4 zone expansion cards. Features include multiple messaging and several emergency panel options. All Entero ® VACIE equipment can operate with 230 Vac and 48 Vdc in case of emergency. The Entero ® ESA 8250 and 8125 power amplifiers are highly efficient and flexible multichannel amplifiers powering 50 V/ 100 V and low impedance loads. Output power can be allocated to all channels; up to 300 Wrms per channel depending on the loads. Installation friendliness The Entero ® ESC emergency system controller can easily be integrated in multi-zone sound systems. With your choice of routing, paging and processing equipment, the customer’s requirements for their venue’s audio solution can still be met, including a variety of user interfaces. The installer can use the front panel interface or Entero ® ESC Installer Software, an intuitive PC application that enables simple system configuration. A dedicated VA routing architecture - independent of the regular system routing - avoids unwanted VA configuration changes while using the main system. What is EN54? EN54 is a European standard that received the official status of a so-called ‘harmonised standard’. The EN54-16 covers all the electronics in a voice alarm system and the EN54-24 covers the loudspeakers used in a voice alarm system. Voice alarm electronics and loudspeakers became part of the Construction Products Directive (CPD). L1 ® Model II system Our most advanced system features our 24-speaker articulated line array providing our best tonal balance, coverage and highest output. It includes a digital port for our highest level of ToneMatch ® performance. For audiences of approximately 500 people. L1 ® Model 1S system A powerful combination of performance and portability that includes our 12-speaker articulated line array providing smooth tonal balance, coverage and high output. It includes a digital port for our highest level of ToneMatch ® performance. For audiences of approximately 300 people. L1 ® Compact System Our smallest, lightest and easiest-to-set-up L1 ® system featuring a 6-speaker curved articulated line array providing smooth tonal balance and coverage, weighing just 13 kg. It features two channels of ToneMatch ® system processing, and integrated bass. For audiences of approximately 100 people. Bass modules The L1 ® Model II and the new L1 ® Model 1S allow for flexible configuration with your choice of bass modules: B1 for greater portability; B2 for greater bass output. Additional product information, including technical data and detailed specifications, can be found at | www.pro.bose.com | All information subject to change without notice. ©2013 Bose Corporation. e Bose trademark(s) mentioned in this material is/are registered or applied for registration in at least some European countries. Customer focus Acoustic design Listen before you buy Project management Products and accessories Installation services After sales services | | | | | | Bose ® Professional Systems Division Bose ® Sound Solutions Product List Bose ® Professional Systems Division The Bose ® Entero ® Voice Alarm ensures the highest safety standards and meets EN54 Unique Bose ® design tools and system controls Only Bose offers Modeler ® Sound System Software and the Auditioner ® playback system III. These next-generation tools for predicting performance offer users an unprecedented ability to predict and design better sound systems. Modeler ® Sound System Software Modeler ® Sound System Software gives designers the ability to predict and design better sound systems. They can model any space, place the speakers and get critical acoustical data in real time – even as they make changes and adjustments. Modeler ® software also lets owners and developers see how the system will perform within the sight lines and visual design of the facility. Auditioner ® Playback System III This innovation allows listeners to hear how a proposed system will sound – before it’s installed or even before the facility is built. This technology is so advanced, that a listener can hear the system from any seat or any location in the facility. And it’s available only from Bose. Bose ® L1 ® portable line array systems L1 ® portable line array loudspeakers are a new class of powered loudspeakers that combine PA and monitors into a single, portable solution. All L1 ® systems use Bose ® technology to provide exceptional tone quality, wide uniform coverage and easy setup. Bose is committed to research, both in our acoustic laboratories, as well as in the field. So researching psychoacoustics or user- friendliness is as important to our brand as talking to company owners or facility managers about what they demand from a sound system. It is their feedback combined with our research that allows us to create patented technologies that directly benefit our customers. We create solutions that are easy to set up and use when installed into hotels, bars, retail space and other public and commercial facilities; from an initial design to a complete installation, we deliver an easy-to-use solution that matches with the décor of a facility. And while most buildings require a straightforward approach from our engineers, other buildings present a more delicate challenge. Engineered sound systems demand an exceptional expertise and specialised products. Bose is dedicated to developing products and technologies that help acoustic designers and consultants create more accurate, more reliable and more efficient solutions for their customers. Our Modeler ® Sound System Software is a predictive analysis tool that we use to create a model of the facility, while our advanced Auditioner ® System Technology permits us to listen to that same model. Together these two products allow our customers to listen to the blueprint of any facility, even before it is built. Bose ® Professional Systems Division also provides product and technical information, marketing and demonstration materials, design resources and other support to a network of authorised ProPartners. We help these carefully selected professionals to execute projects from start to finish, and when their work is done, Bose continues to provide a high level of after sales service. To manage an evacuation without causing congestion, the system can send an alarm message to places where people must evacuate immediately, while simultaneously sending an alert stand-by message to other areas. Entero ® Voice Alarm system takes the worry out of evacuation. Tailor-made Bose ® can provide complete solutions with system electronics and speakers, tailor-made to your specific needs. It can be used with your choice of audio control systems and user interfaces. Future proof The new Bose ® Entero ® Voice Alarm is future proof, flexible and expandable, e.g. by using 4x4 zone expansion cards. The system is engineered and tested for demanding business environments and is backed by a transferable 5-year limited warranty. One system reduces costs Bose ® Entero ® Voice Alarm allows voice messages and background music to be combined in one system, reducing the amount of equipment, installation and service costs. The new Bose ® Entero ® Voice Alarm system continuously monitors all related loudspeaker lines, amplifiers and wiring, and checks the links to the fire detection system. In an emergency, the system overrides the current audio source, automatically issuing intelligible evacuation messages at an optimum volume. This (or a variant of this) product meets EN54-24, EN54-16 and/or EN54-4 standards. 100981_Brochure_PLB_210x297_master_v05_final.indd 1 1/7/13 5:29 PM

Upload: others

Post on 13-Apr-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Bose Professional Systems Division the highest safety

NEW!

NEW!

NEW!

NEW!

Voice Alarm Control and Indicating Equipment - VACIEThe Entero® ESC emergency system controller is expandable from 4 to 8 or 12 zones by use of 4 x 4 zone expansion cards. Features include multiple messaging and several emergency panel options. All Entero® VACIE equipment can operate with 230 Vac and 48 Vdc in case of emergency.

The Entero® ESA 8250 and 8125 power amplifiers are highly efficient and flexible multichannel amplifiers powering 50 V/ 100 V and low impedance loads. Output power can be allocated to all channels; up to300 Wrms per channel depending on the loads.

Installation friendlinessThe Entero® ESC emergency system controller can easily be integrated in multi-zone sound systems. With your choice of routing, paging and processing equipment, the customer’s requirements for their venue’s audio solution can still be met, including a variety of user interfaces.

The installer can use the front panel interface or Entero® ESC Installer Software, an intuitive PC application that enables simple system configuration. A dedicated VA routing architecture - independent of the regular system routing - avoids unwanted VA configuration changes while using the main system.

What is EN54?EN54 is a European standard that received the official status of a so-called ‘harmonised standard’. The EN54-16 covers all the electronics in a voicealarm system and the EN54-24 covers the loudspeakers used in a voice alarm system. Voice alarm electronics and loudspeakers became part of theConstruction Products Directive (CPD).

L1® Model II system Our most advanced system features our 24-speaker articulated line array providing our best tonal balance, coverage and highest output. It includes a digital port for our highest level of ToneMatch® performance. For audiences of approximately 500 people.

L1® Model 1S system A powerful combination of performance and portability that includes our 12-speaker articulated line array providing smooth tonal balance, coverage and high output. It includes a digital port for our highest level of ToneMatch® performance. For audiences of approximately 300 people.

L1® Compact System Our smallest, lightest and easiest-to-set-up L1® system featuring a 6-speaker curved articulated line array providing smooth tonal balance and coverage, weighing just 13 kg. It features two channels of ToneMatch® system processing, and integrated bass. For audiences of approximately 100 people.

Bass modules The L1® Model II and the new L1® Model 1S allow for flexible configuration with your choice of bass modules: B1 for greater portability; B2 for greater bass output.

Additional product information, including technical data and detailed specifications, can be found at

| www.pro.bose.com |

All information subject to change without notice.©2013 Bose Corporation.� e Bose trademark(s) mentioned in this material is/are registeredor applied for registration in at least some European countries.

Customer focus

Acoustic design

Listen before you buy

Project management

Products and accessories

Installation services

After sales services| | | | ||

Bose® Professional Systems Division

Bose® Sound SolutionsProduct List

Bose® Professional Systems DivisionThe Bose® Entero® Voice Alarm ensures the highest safety standards and meets EN54

Unique Bose® design tools and system controls Only Bose offers Modeler® Sound System Software and the Auditioner® playback system III. These next-generation tools for predicting performance offer users an unprecedented ability to predict and design better sound systems.

Modeler® Sound System Software Modeler® Sound System Software gives designers the ability to predict and design better sound systems. They can model any space, place the speakers and get critical acoustical data in real time – even as they make changes and adjustments. Modeler® software also lets owners and developers see how the system will perform within the sight lines and visual design of the facility.

Auditioner® Playback System III This innovation allows listeners to hear how a proposed system will sound – before it’s installed or even before the facility is built. This technology is so advanced, that a listener can hear the system from any seat or any location in the facility. And it’s available only from Bose.

Bose® L1® portable line array systems L1® portable line array loudspeakers are a new class of powered loudspeakers that combine PA and monitors into a single, portable solution. All L1® systems use Bose® technology to provide exceptional tone quality, wide uniform coverage and easy setup.

Bose is committed to research, both in our acoustic laboratories, as well as in the field. So researching psychoacoustics or user-

friendliness is as important to our brand as talking to company owners or facility managers about what they demand from a sound

system. It is their feedback combined with our research that allows us to create patented technologies that directly benefit our

customers. We create solutions that are easy to set up and use when installed into hotels, bars, retail space and other public and

commercial facilities; from an initial design to a complete installation, we deliver an easy-to-use solution that matches with the

décor of a facility. And while most buildings require a straightforward approach from our engineers, other buildings present a

more delicate challenge.

Engineered sound systems demand an exceptional expertise and specialised products. Bose is dedicated to developing products

and technologies that help acoustic designers and consultants create more accurate, more reliable and more efficient solutions

for their customers. Our Modeler® Sound System Software is a predictive analysis tool that we use to create a model of the facility,

while our advanced Auditioner® System Technology permits us to listen to that same model. Together these two products allow

our customers to listen to the blueprint of any facility, even before it is built.

Bose® Professional Systems Division also provides product and technical information, marketing and demonstration materials,

design resources and other support to a network of authorised ProPartners. We help these carefully selected professionals to

execute projects from start to finish, and when their work is done, Bose continues to provide a high level of after sales service.

To manage an evacuation without causing congestion, the system can send an alarm message to places where people must evacuate immediately, while simultaneously sending an alert stand-by message to other areas. Entero® Voice Alarm system takes the worry out of evacuation.

Tailor-madeBose® can provide complete solutions with system electronics and speakers, tailor-made to your specific needs. It can be used with your choice of audio control systems and user interfaces.

Future proofThe new Bose® Entero® Voice Alarm is future proof, flexible and expandable, e.g. by using 4x4 zone expansion cards. The system is engineered and tested for demanding business environments and is backed by a transferable 5-year limited warranty.

One system reduces costsBose® Entero® Voice Alarm allows voice messages and background music to be combined in one system, reducing the amount of equipment, installation and service costs.

The new Bose® Entero® Voice Alarm system continuously monitors all related loudspeaker lines, amplifiers and wiring, and checks the links to the fire detection system. In an emergency, the system overrides the current audio source, automatically issuing intelligible evacuation messages at an optimum volume.

This (or a variant of this) product meets EN54-24, EN54-16 and/or EN54-4 standards.

100981_Brochure_PLB_210x297_master_v05_final.indd 1 1/7/13 5:29 PM

Page 2: Bose Professional Systems Division the highest safety

Progressive directivity array with six RoomMatch® array module loudspeakers

and two RMS215 subwoofers.

Bose® Panaray® & LT loudspeakers

75 Hz to 16 kHz(±3 dB)

90 Hz to 16 kHz(±3 dB)

150 Hz to 17 kHz(±3 dB)

50 Hz to 140 Hz(±3 dB)

55 Hz to 16 kHz(±3 dB)

155 Hz to 12 kHz(-3dB)

75 Hz to 13 kHz(-3dB)

40 Hz to 300 Hz(±3 dB)

70 Hz to 16 kHz(±3 dB)

70 Hz to 16 kHz(±3 dB)

34,0 x 14,4 x 30,4 cm 59,2 x 20,8 x 20,2 cm 60,3 x 14,6 x 17,9 cm 78,7 x 35,6 x 39,4 cm 33,4 x 52,0 x 32,7 cm 98,6 x 10,7 x 13,0 cm 98,6 x 10,4 x 14,0 cm 67,8 x 25,9 x 46 cm

31,8 x 52,2 x 26,6 cm (front);

10,4 x 24 x 26,6 cm (rear)

31,8 x 36,1 x 21,1 cm (front);

14,1 x 13,5 x 21,1 cm (rear)

302Aloudspeaker

402® IIloudspeaker

502® Aloudspeaker

502® B bassloudspeaker

802® IIIloudspeaker

MA12loudspeaker

MA12 EXloudspeaker

MB4 bassloudspeaker

620M multi-position

floor array

310M multi-position

floor array

Use for voiceand music

reproduction.Indoor & outdoor.

Use for voice and music reproduction in fixed installations and for

portable use. Indoor & outdoor.

Use for speech and light music reproduction.

Indoor only.

Use with 502® Afor additional

bass extension.Indoor only.

Use for full range music and voice reproduction in

fixed installations and for portable use.

Indoor & outdoor.

Use for voice and music reproduction in indoor

acoustically demanding spaces.

Use for voice and full range music

from 75Hz-13kHz in acoustically

demanding spaces. Indoor & outdoor.

Use for additional bass extension in permanent

installations or portable systems.

Indoor only.

Use for installed stage applications for choirs, bands,

live music events.

Use for installed stage applications for choirs, bands,

live music events.

LT 9400loudspeaker

LT 6400loudspeaker

LT 9403loudspeaker

LT 6403loudspeaker

LT 9702 WRloudspeaker

LT 9402 WRloudspeaker

LT 4402 WRloudspeaker

LT 3202 WRloudspeaker

MB24 WR Bassloudspeaker

MB12 WR Bassloudspeaker

102 dB-SPL @ 1 m108 dB-SPL @ 1 m

(Peak)

111 dB-SPL @ 1 m115 dB-SPL @ 1 m

(Peak)

112 dB-SPL @ 1 m118 dB-SPL @ 1 m

(Peak)

116 dB-SPL @ 1 m122 dB-SPL @ 1 m

(Peak)

114 dB-SPL @ 1 m116 dB-SPL @ 1 m

(Peak)113 dB-SPL @ 1 m 109 dB-SPL @ 1 m 110 dB-SPL @ 1 m

113 dB-SPL @ 1 m119 dB-SPL @ 1 m

(Peak)

111 dB-SPL @ 1 m117 dB-SPL @ 1 m

(Peak)

178° H x 93° V 120° H x 60° V 120° H x 70°V Omni-directional 120° H x 100° V 145° H x 20° V 160° H x 20° V Omni-directionalat all frequenties

below 200 Hz

Individual mix: 40° H x 120° VDeep stage:

120° H x 40° VShallow stage: 120° H x 40° V

Individual mix: 60° H x 120° VDeep stage:

120° H x 60° VShallow stage: 120° H x 60° V

200 W @ 100 V or100 W @ 6 Ω

120 W @ 8 Ω 150 W @ 8 Ω 450 W @ 8 Ω 240 W @ 8 Ω 300 W @ 8 Ω

Full range speech & music:

150 W @ 8 ΩSpeech-only: 300 W @ 8 Ω

200 W @ 8 Ω 200 W @ 8 Ω 100 W @ 8 Ω

70 V : 25 Ω at 200 W tap setting

100 V : 50 Ω at 200 W tap setting

8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω

Cost-effective solution for voice only

applications and as delay-fill in larger

installations. Indoor only.

Cost-effective solution for voice only

applications and as delay-fill in larger

installations. Indoor only.

Use for high SPL,full range response

and directivity control without

the need for additional bass augmentation.

Use for high SPL,full range response

and directivitycontrol without

the need foradditional bass augmentation.

Use for shorter throw distances.Indoor & outdoor.

Use for medium throw distances. Indoor & outdoor.

Use for medium throw distances. Indoor & outdoor.

Use for longthrow distances

with narrowcoverage.

Indoor & outdoor.

Use withPanaray® or LTloudspeakers.It also can be

used in multiplebass array

configurations.

Use withPanaray® or LTloudspeakers.It also can be

used in multiplebass array

configurations.

64,0 x 61,2 x 57,4 cm 64,0 x 61,2 x 57,4 cm 87,3 x 61,2 x 57,4 cm 87,3 x 61,2 x 57,4 cm 87,9 x 57,1 x 45,2 cm 87,9 x 57,2 x 68,7 cm 86,4 x 47,1 x 69,3 cm 107,3 x 57,3 x 99,6 cm 71,3 x 50,8 x 64,6 cm 37,4 x 50,8 x 64,6 cm

190 Hz to 16 kHz(±3 dB)

190 Hz to 16 kHz(±3 dB)

50 Hz to 16 kHz(±3 dB)

50 Hz to 16 kHz(±3 dB)

220 Hz to 16 kHz(±3 dB)

180 Hz to 16 kHz(±3 dB)

180 Hz to 16 kHz(±3 dB)

220 Hz to 16 kHz(±3 dB)

40 Hz to 280 Hz(±3 dB)

40 Hz to 280 Hz(±3 dB)

124 dB-SPL @ 1 m130 dB-SPL @ 1 m

(Peak)

125 dB-SPL @ 1 m131 dB-SPL @ 1 m

(Peak)

122 dB-SPL @ 1 m128 dB-SPL @ 1 m

(Peak)

123 dB-SPL @ 1 m129 dB-SPL @ 1 m

(Peak)

126 dB-SPL @ 1 m132 dB-SPL @ 1 m

(Peak)

127 dB-SPL @ 1 m133 dB-SPL @ 1 m

(Peak)

129 dB-SPL @ 1 m135 dB-SPL @ 1 m

(Peak)

134 dB-SPL @ 1m140 dB-SPL @ 1m

(Peak)

123 dB-SPL @ 1 m129 dB-SPL @ 1 m

(Peak)

117 dB-SPL @ 1 m123 dB-SPL @ 1 m

(Peak)

93° H x 52° V 65° H x 52° V 93° H x 49° V 65° H x 52° V 92° H x 61° V 95° H x 39° V 44° H x 38° V 36° H x 22° V Omni-directional Omni-directional

100 W @ 8 Ω 100 W @ 8 Ω 500 W @ 8 Ω 500 W @ 8 Ω 140 W @ 8 Ω 140 W @ 8 Ω 140 W @ 8 Ω 280 W @ 16 Ω800 W @ 4 Ω

(parallel) 400 W @ 8 Ω

8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 8 Ω 16 Ω 4 Ω (parallel)8 Ω (discrete)

8 Ω

Description

Dimensions(H x W x D)

Frequencyrange

Maximumacoustic output

Beam Width

Long-termPower Handling

Impedance

RoomMatch® array module loudspeakers PowerMatch®

Power (Watt) Quad Bridge mode (2 ch)

Power (Watt) Current Share mode (4 ch)

Power (Watt) MonoMode (8ch)

Vertical coverage W x H x D

Description

Power (Watt) Bridgemode (4 ch)

10°455 x 993 x 598 mm

5°428 x 993 x 598 mm

20°509 x 993 x 598 mm

40°610 x 993 x 598 mm

60°700 x 993 x 598 mm

300 W at 8 Ω, 500 W at 4 Ω, 500 W at 2 Ω

RM12060 127 dB RM9060 128 dB RM7060 129 dB RM5560 130 dB

RM5540 132 dB

RM5520 133 dB

RM5510 133 dB

RM7040 131 dB

RM7020 132 dB

RM7010 132 dB

RM7005 132 dB

RM9040 130 dB

RM9020 130 dB

RM9010 131 dB

RM9005 131 dB

RM12040 128 dB

RM12020 129 dB

RM12010 129 dB

RM12005 130 dB

2000 W at 4 Ω, 2000 W at 100 V,1600 W at 70 V

1000 W at 2 Ω

High efficiency configurable power amplifier.4 kW of output power can be allocated

between 2 to 8 channels.PM8500N includes network control

and monitoring via ethernet

1000 W at 8 Ω, 1000 W at 4 Ω, 1000 W at 100 V, 800 W at 70 V

PM8500 / PM8500Npower amplifier

FreeSpace® loudspeakers Configurable Professional power amplifier

RMS215

Omnidirectional

127 dB (Array) / 133 dB (Ground stack)

452 x 943 x 553

Beam Width (H x V)

SPL

Dimensions

Horizontal coverage

RM5505 133 dB

FreeSpace® 4400 business music system Signal processing, amplification and business music system features are all combined in one component that fits easily on a shelf. There’s no need to purchase, configure and install multiple electronic units – providing faster, smoother installation with fewer interruptions and less downtime. The FreeSpace® 4400 system delivers music and pages where they’re needed – in up to four separate areas – inside and outside.

FreeSpace® DXA 2120 digital mixer / amplifier The FreeSpace® DXA 2120 Digital mixer / amplifier gives users the functionality they want from their business music systems. Once the unit is customised for its environment, business owners and staff have an easily accessible tool that they can operate with confidence. Users can easily host small events with up to four microphones or music sources. They can also deliver to music to one or two separate zones while providing paging to all areas.

ControlSpace® SP-24 sound processor Optimizing 2x4 installed and portable sound systems made easy. The processor can be configured through a simplified front panel menu or by a comprehensive, straightforward and intuitive PC software editor application. Easy selection of preprogrammed scenes, gain and delay parameters, or quick access to Bose loudspeaker presets. The software editor enables access to all signal processing settings and routing, both live and offline.

FreeSpace® IZA 100 V andlow impedance integrated zone amplifiers Premium sound made simple and flexible to expand. Simple set up, easy daily operation, providing speaker EQ for FreeSpace® DS 16/40 loudspeakers and Bose® Dynamic EQ. Bose® Opti-voice® automatically provides a smooth transition between music and page signals. Simple operation by optional level or level & source control panels.

FreeSpace® ZA 100 V and low impedance zone amplifiers Ideal power amp expansion for many applications. Will use front end signal processing from Bose products like FreeSpace® IZA integrated zone amplifiers, FreeSpace® 4400 BMS, ControlSpace® ESP-88 or AMS-8.

ControlSpace® ESP-88 engineered sound processorControlSpace® systems deliver a powerful, flexible, sophisticated DSP solution for nearly any installation – large or small, simple or complex. Just as important, a ControlSpace® system offers simple, elegant controls that customers can access and operate with confidence. At the heart of the ESP-88 is a single, powerful DSP processor. Its innovative design delivers greater flexibility, higher reliability and lower latency than many other processors in its class.

ControlSpace® AMS-8 audio management systemThe Bose® ControlSpace® AMS-8 audio management systems is an integrated 8 x 8 digital sound processor that allows easy and flexible management of multi-room audio, message and paging distribution into mono or stereo zones.

ControlSpace® AMS-8 wall controllerand ControlSpace® AMS-8 paging panelThe ControlSpace® AMS-8 wall controller has an LCD-display with backlight and 2 x 12 characters. The display shows selected source and volume step. Source names and volume can be changed with installer software. The ControlSpace® AMS-8 paging panel has 16 buttons, programmable for one or more zones. A ‘select all’ button, ‘de-select all’ button, talk button, flush mount option, and 4 message buttons (to be used with message storage card).

Long-termpower handling

Equalisation

Maximumacousticoutput

Dimensions(H x W x D)

Description

Frequencyrange

Mounting

Installation

FreeSpace® 3System (Flush)

FreeSpace® 3System

(Surface)

DS 100SEloudspeaker

DS 100Floudspeaker

DS 40SE loudspeaker

DS 40F loudspeaker

DS 40F loudspeaker

(8 Ohm)

DS 16S &DS 16SE

loudspeaker

DS 16Floudspeaker

203 loudspeaker

360P Series IIloudspeaker

Flange + grille: Ø 15,7 cm

Cut-out hole: Ø 12,7 cm

Depth: 12,3 cmFlange + grille:

Ø 39,1 cm Cut-out hole:

Ø 36,3 cm Depth: 20,3 cm

Satellite:7,7 x 7,7 x 10,2 cm

Bass:35,6 x 22,2 x 34,5

cm

17,8 x 38,1 x 21,6 cm

Flange + grille:Ø 29,9 cm

Cut-out hole:Ø 26,9 cm

Depth: 19,3 cm

15,9 x 32,6 x 17,5 cm

Flange + grille:Ø 29,9 cm

Cut-out hole:Ø 26,7 cm

Depth: 16,3 cm

Flange + grille:Ø 29,9 cm

Cut-out hole:Ø 26,7 cm

Depth: 16,3 cm

12,4 x 25 x 11,7 cm

Flange + grille:Ø 23,9 cm

Cut-out hole:Ø 20,4 cm

Depth: 15,8 cm

18,4 x 32,6 x 21,4 cmØ 36,8 cm;

height 37,8 cm

200 W @ 70 / 100 Vor 100 W @ 6 Ω

200 W @ 70 / 100 Vor 100 W @ 6 Ω

100 W @ 70 / 100 Vor 8 Ω

100 W @ 70 / 100 Vor 8 Ω

40 W @ 70 / 100 Vor 8 Ω

40 W @ 70 / 100 Vor 8 Ω

40 W @ 8 Ω16 W @ 70 / 100 V

or 8 Ω16 W @ 70/100 V

or 8 Ω75 W @ 70 / 100 V

or 100 W @ 6 Ω80 W @ 70 / 100 V

Use with 40-HzHP-filter

Use with 40-HzHP-filter

Recommended lsp EQ available or use

55-Hz HP-filter

Recommended lsp EQ available or use

55-Hz HP-filter

Recommended lsp EQ available or use

70 Hz HP-filter

Recommended lsp EQ available or use

70 Hz HP-filter

Recommended lsp EQ available or use

70 Hz HP-filter

Recommended lsp EQ available or use

80-Hz HP-filter

Recommended lsp EQ available or use

80-Hz HP-filter

Use with 50-HzHP-filter

Use with 60-HzHP-filter

100 dB-SPL @ 1 m106 dB-SPL @ 1 m

(Peak)

100 dB-SPL @ 1 m106 dB-SPL @ 1 m

(Peak)

105 dB-SPL @ 1 m111 dB-SPL @ 1 m

(Peak)

105 dB-SPL @ 1 m111 dB-SPL @ 1 m

(Peak)

103 dB-SPL @ 1 m109 dB-SPL @ 1 m

(Peak)

103 dB-SPL @ 1 m109 dB-SPL @ 1 m

(Peak)

103 dB-SPL @ 1 m109 dB-SPL @ 1 m

(Peak)

96 dB-SPL @ 1 m102 dB-SPL @ 1 m

(Peak)

96 dB-SPL @ 1 m102 dB-SPL @ 1 m

(Peak)

104 dB-SPL @ 1 m110 dB-SPL @ 1 m

(Peak)

101 dB-SPL @ 1 m106 dB-SPL @ 1 m

(Peak)

For background/foreground

music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

For background music, paging.

For background music, paging.

For background/foreground

music, paging.

For background/foreground

music, paging.

50 Hz to 16 kHz(±3 dB)

50 Hz to 16 kHz(±3 dB)

65 Hz to 16 kHz(±3 dB)

65 Hz to 16 kHz(±3 dB)

80 Hz to 16 kHz(±3 dB)

80 Hz to 16 kHz(±3 dB)

80 Hz to 16 kHz(±3 dB)

90 Hz to 16 kHz(±3 dB)

90 Hz to 16 kHz(±3 dB)

60 Hz to 16 kHz(±3 dB)

70 Hz to 15 kHz(±3 dB)

Flush Ceiling, Pendant

Surface SurfaceFlush Ceiling,

PendantSurface

Flush Ceiling,Pendant

Flush Ceiling,Pendant

Surface Flush Ceiling,

PendantSurface Inground

Indoor Indoor Indoor / Outdoor Indoor Indoor / Outdoor Indoor Indoor Indoor / Outdoor Indoor Indoor Outdoor / Indoor

Bose® System Electronics give users the control they need without the risk of altering critical system settings. Plus, many system functions can be programmed to run automatically, eliminating the need for extensive training.

ControlSpace® CC-64 control centreand CC-16 zone controller These two controllers provide the easy operation that is key to customer satisfaction. They are the result of significant research in industrial design, ergonomics and usability. They incorporate large, easy-to-read LCDs, simple buttons or knobs, and styling that fits almost any decor. Even highly complex installations can be operated with the touch of a button, so users can feel at ease and in full control.

give users the control they need without the risk of altering critical system settings. Plus, many system functions can be programmed to run automatically, eliminating the need for extensive training.

*Maximum load, only in combination with TraPack (TraPack 1 for 8100,

TraPack 3 for 4250, TraPack 5 for 4500).

TraPack

Entero® ESA 8125 Entero® ESA 8250 power amplifier power amplifier

Bridged 16 Ohm

Bridged 8 Ohm

8 Ohm

4 Ohm

50 Volt

Bridged 100 Volt)

Description

Description

100 Volt with TraPack

4 x 250 Wrms / 4 x 250 Wmusic 4 x 500 Wrms / 4 x 500 Wmusic

8 x 125 Wrms / 8 x 125 Wmusic 8 x 250 Wrms / 8 x 250 Wmusic

4 x 250 Wrms / 4 x 350 Wmusic 4 x 500 Wrms / 4 x 700 Wmusic

8 x 125 Wrms / 8 x 175 Wmusic 8 x 250 Wrms / 8 x 350 Wmusic

8 x 125 Wrms / 8 x 175 Wmusic 8 x 250 Wrms / 8 x 350 Wmusic

4 x 250 Wrms / 4 x 350 Wmusic 4 x 250 Wrms / 4 x 700 Wmusic

High efficiency flexible power amplifier. Output power can be allocated to all channels; up to 300 Wrms per channel depending

on the loads. Can be used in Entero® Voice Alarm system

8 x 125 Wrms / 8 x 125 Wmusic 8 x 250 Wrms / 8 x 250 Wmusic

TraPack housing to fit any mix of up to eight 100 Volt transformers of 125/250 Watt

120°

Maximum acoustic output(HF no EQ)

90°

Maximum acoustic output(HF no EQ)

70°

Maximum acoustic output(HF no EQ)

55°

Maximum acoustic output(HF no EQ)

RMS215

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW! NEW!

Power(Watt)

Power(Watt)

2 x 8 Ω(discrete connection)

RoomMatch modules allow ‘point and shoot’ and Progressive Directivity Array configurations; the directivity varies across the array’s length to optimize the coverage for a specific listening area. They deliver scalable horizontal and vertical coverage and pattern control, seamless vertical coverage and have a highly efficient utilization of acoustic power; highest tonal balance consistent over the target coverage area;

Including integrated rigging structure for easy installation; for indoor use.

500 W Continuous / 2000 W Peak for Low frequency and 150 W Continuous / 600 W Peak for High Frequency

60 Hz to 16 kHz (+/- 3dB)

4 Ω for Low frequency and 8 Ω for high frequencyImpedance

Impedance

Long term power handling

Long term power handling

Frequency range

Frequency range

General Description

General DescriptionLow Frequency extension

for RoomMatch Arrays; for indoor use

1000 W continuous (500 W/woofer) /4000 W peak

(2000 W/woofer)

40Hz to 280 Hz (-10 dB)

TraPack

This (or a variant of this) product meets EN54-24, EN54-16 and/or EN54-4 standards.

A

D

C

B

E

Mixer / amplifiers & amplifiers

Line Inputs

Mic / Line Input

Aux Input

Paging Input

Direct input(with PTT)

Aux / Line Output

User Interfaces

Powersharing400 W distributed across 4 outputs

2 x 100 W 1 x 90 W n / a 1 x 90 W n / a

n / a 2 x 120 W @ 4 Ω n / a2 x 32 W @ 8 Ω /2 x 50 W @ 4 Ω

n / a2 x 32 W @ 8 Ω /2 x 50 W @ 4 Ω

2 - 2 2 1 1

1 1-4 1 1 - -

- - 1 1 - -

1 1 1 1 - -

1 1 - - - -

1 1 1 1 - -

A / B / C D / E D / E D / E - -

FreeSpace®

4400 BMSFreeSpace® DXA2120

FreeSpace® IZA 190-HZ integrated

zone amplifier

FreeSpace® IZA 250-LZ integrated

zone amplifier

FreeSpace® ZA 190-HZ

zone amplifier

FreeSpace® ZA 250-LZ

zone amplifier

Power @ 100 Volt

Power@ 4 Ohm / 8 Ohm

TraPack 1 TraPack 3 TraPack 5

TraPack

Power (Watt) 8 x 100 W 4 x 300 W 4 x 500 W

Amplifiers

100 Volt

Power(Watt)

Bridged8 Ohm

Bridged4 Ohm

8 Ohm

4 Ohm

2 Ohm

8 x 100 W* 4 x 300 W* 4 x 500 W* n / a n / a n / a n / a

4 x 230 Wrms /4x 360 Wmusic

2 x 560 Wrms /2x 980 Wmusic

2 x 1000 Wrms /2x 1760 Wmusic

2 x 1400 Wrms /2x 2440 Wmusic

1 x 1430 W 1 x 1850 W 1 x 3300 W

4 x 260 Wrms /4 x 500 Wmusic

2 x 560 Wrms /2 x 1220 Wmusic

2 x 1000 Wrms /2 x 2200 Wmusic

n / a 1 x 2050 W 1 x 2600 W n / a

8 x 80 Wrms /8 x 110 Wmusic

4 x 200 Wrms /4 x 330 Wmusic

4 x 400 Wrms /4 x 600 Wmusic

4 x 600 Wrms /4 x 760 Wmusic

2 x 450 W 2 x 560 W 2 x 950 W

8 x 115 Wrms /8 x 180 Wmusic

4 x 280 Wrms /4 x 490 Wmusic

4 x 500 Wrms /4 x 880 Wmusic

4 x 700 Wrms /4 x 1220 Wmusic

2 x 715 W 2 x 925 W 2 x 1700 W

8 x 130 Wrms /8 x 250 Wmusic

4 x 280 Wrms /4 x 610 Wmusic

4 x 500 Wrms /4 x 1100 Wmusic

n / a 2 x 1025 W 2 x 1300 W n / a

Entero® 8100 power amplifier

Entero® 4250 power amplifier

Entero® 4500 power amplifier

Entero® 4700 power amplifier

B1500 power amplifier

B2000 power amplifier

B3500 power amplifier

100981_Brochure_PLB_210x297_master_v05_final.indd 2 1/7/13 5:31 PM