books mechanical engineering

C A T A L O G U E

MECHANICALENGINEERING

LAXMI PUBLICATIONS PVT LTD


Complimentary Copies

New Authors

Prices

Complimentary copies of the books in this catalogue are available on formal request to the teachers who wish to consider them for possible course adoption.

To request a complimentary copy, write to our head office only. Please include your position, the course title and approximate enrollment, text currently in use. Complimentary copies will not be sent without this information. It is also necessary to send the syllabus of your university for the course you are requesting a specimen copy.

We are always delighted to hear from new authors. Please write to:

Laxmi Publications (P) Ltd.

113, Golden House, Daryaganj,

New Delhi-110002,

with details of your proposal, which will receive careful consideration.

All Prices are subject to change without notice. Prices are established in India and in Indian Rupees.

CAT-0451-000 MECHANICAL CATALOG

Laxmi Publications is a privately held publishing company headquartered in New Delhi, India. Since its inception in 1974, it has grown tremendously as one of the leading educational publishers in India. It has following subsidiaries and imprints through which it caters to different niches of educational and professional books market.

1. Laxmi Publications Pvt. Ltd: Engineering, Management, Computer Science & IT, College Mathematics, Secondary and Senior Secondary CBSE Schools.

2. Firewall Media: Computer Books and various disciplines of Science and Technology for the educational and professional market.

3. University Science Press: Higher Education Books.

4. Golden Bells: Books for competitive examinations like IIT JEE, CBSE PMT & others and pre-primary, primary and middle school books.

5. Infinity Science Press, LLC (USA): Engineering, Mathematics, Physics, Business Books

1

MECHANICAL ENGINEERING ��

ISBN: 978-81-318-0595-4

EDITION: Seventh, 2009

SIZE: 71

49

1

2

′′×

′′

PAGES: 1732

PRICE: Rs. 750.00

Introduction to SI Units and Conversion Factors1. Kinetic Theory of Gases and Basic Concepts ofThermodynamics; 2. Properties of Pure Substances; 3. First Lawof Thermodynamics; 4. Second Law of Thermodynamics andEntropy; 5. Availability and Irreversibility; 6. ThermodynamicRelations; 7. Ideal and Real Gases; 8. Gases and Vapour Mixtures;9. Psychrometrics; 10. Fuels and Combustion; 11. SteamGenerators; 12. Boiler Mountings and Accessories; 13. Draught;14. Performance of Steam Generators; 15. Basic Steam Power Cycles; 16. Reciprocating SteamEngine; 17. Compound Steam Engines; 18. Steam Nozzles; 19. Steam Turbines; 20. SteamCondensers; 21. Gas Power Cycles; 22. Variable Specific Heats; 23. Internal Combustion Engines;24. Air Compressors; 25. Gas Turbines and Jet Propulsion; 26. Refrigeration; 27. Air Conditioning;28. Heat Transfer; 29. Non-Conventional Power Generation.

1. Thermal Engineering R.K. Rajput

ISBN: 978-81-318-0521-3

EDITION: First, 2009

SIZE: 71

49

1

2

′′×

′′

PAGES: 444

PRICE: Rs. 275.00

1. Reliability and its Management. 2. Reliability Mathematics. 3. Failure Statistics, Reliability andHazard Rates. 4. Markov Chains. 5. Reliability Prediction and Analysis. 6. Reliability Design.7. Reliability Testing. 8. Reliability Computation and Expert Systems. 9. Software Reliability.10. Terotechnology: An Overview. 11. Maintenance Management. 12. Maintainability andAvailability. 13. Condition Based Maintenance. 14. Management of Spare Parts. 15. Life CycleCosting. 16. Safety and Human Factors in Maintainability.

2. Reliability, Maintenance and Safety Engineering Dr. A.K. Gupta

ISBN: 978-81-318-0539-8


SIZE: 71

49

1

2

′′×

′′

PAGES: 298

PRICE: Rs. 170.00

ISBN: 978-81-318-0583-1


SIZE: 71

49

1

2

′′×

′′

PAGES: 994

PRICE: Rs. 395.00

3. Applied Thermodynamics R.K. Rajput

0. Introduction to Thermodynamics—Definitions and Formulae. 1. Properties of Steam andSteam Generators; 2. Basic Steam Power Cycles; 3. Reciprocating Steam Engine;4. Compound Steam Engines; 5. Steam Nozzles; 6. Steam Turbines; 7. Steam Condensers;8. Gas Power Cycles; 9. Internal Combustion Engines; 10. Air Compressors; 11. Gas Turbinesand Jet Propulsion.

SECTION A1. Introduction to Statics; 2. Introduction to Vector Algebra; 3. Two and Three DimensionalForce Systems; 4. Concept of Equilibrium of Rigid Body; 5. Friction; 6. Distributed Forces(Centroid, Centre of Gravity and Centre of Mass); 7. Moment of Inertia of Plane Figures(Second Moment of Area); 8. Mass Moments of Inertia (Second Moment of Mass); 9. VirtualWork.

SECTION B1. Kinematics of Particles (Rectilinear Plane Motion); 2. Plane Curvilinear Motion of Particles;3. Plane Kinematics of Rigid Bodies; 4. Combined Motion of Translation and Rotation (GeneralPlane, Motion); 5. Kinetics of Particles; 6. Work and Energy; 7. Principles of Linear Impulseand Momentum; 8. Plane Kinetics of Rigid Bodies.

SECTION C1. Simple Stress; 2. Simple Strain; 3. Statically Indeterminate System and Thermal Stress.

4. Theory and Applications of Mechanical Sciences (Part-1) Dilip Kumar Adhwarjee

Bestseller

1,10,000COPIES SOLD

2

ISBN: 978-81-318-0515-2


SIZE: 71

49

1

2

′′×

′′

PAGES: 244

PRICE: Rs. 140.00

��MECHANICAL ENGINEERING

SECTION A1. Introduction; 2. Zeroth Law of Thermodynamics and Temperature; 3. Heat and Work; 4. FirstLaw of Thermodynamics (Control Mass/Closed System); 5. First Law of Thermodynamics(Control Volume/Open System); 6. Second Law of Thermodynamics; 7. Carnot Cycle; 8. ClausiusInequality, Entropy and Irreversibility; 9. Properties of Gases (Real and Ideal); 10. Air StandardCycles; 11. Properties of Pure Substances; 12. Vapour Compression Refrigeration Cycle.

SECTION B1. Properties of Fluids; 2. Fluid Statics; 3. Measurement of Pressure; 4. Fluid Kinematics;5. Dynamics of Ideal Fluids.

5. Theory and Applications of Mechanical Sciences (Part-2) Dilip Kumar Adhwarjee

ISBN: 978-81-318-0511-4


SIZE: 71

49

1

2′′ × ′′

PAGES: 208

PRICE: Rs. 120.00

1. Introduction to Operation Research; 2. Linear Programming (L.P.); 3. Simplex Method;4. Transportation Model; 5. Assignment Model; 6. Advanced Topics in Linear Programming;7. Dual Simplex Method and Sensitivity Analysis; 8. Project Management (PERT and CPM);9. Decision Analysis; 10. Game Theory; 11. Queuing Theory; 12. Simulation; 13. Markov Chains.

6. Theory and Applications of Operations Research Dilip Kumar Adhwarjee

ISBN: 978-81-318-0351-6


SIZE: 71

49

1

2

′′×

′′

PAGES: 241

PRICE: Rs. 150.00

ISBN: 978-81-318-0357-8


SIZE: 71

49

1

2

′′×

′′

PAGES: 479

PRICE: Rs. 275.00

7. A Textbook of Engineering Material and Metallurgy Er. Amandeep Singh Wadhwa, Er. Harvinder Singh Dhaliwal

SECTION A1. Atomic Structure and Chemical Bonding; 2. Crystal Structure; 3. Solidification/Crystallization;4. Deformation of Metals; 5. Imperfections/Defects in Crystal.

SECTION B1. Engineering Materials; 2. Ferrous and Non-ferrous Materials; 3. Properties of EngineeringMaterials; 4. Testing of Materials; 5. Equilibrium Phase Diagrams; 6. Iron Carbon System.

SECTION C1. Heat Treatment Processes for Steels; 2. Thermochemical Treatment of Steels; 3. SurfaceHardening; 4. Possible Defects, Causes and Remedies in Heat Treatment; 5. Hardenability;6. Quenchants; 7. Effect of Alloying Element on Steels.

1. Introduction to Mechatronics; 2. Sensors and Transducers; 3. Hydraulic System; 4. ElectricalActuation Systems; 5. System Models; 6. Elements of Machine Tools; 7. Signal Conditioning;8. Microprocessor and Microcontrollers; Question Bank.

8. Mechatronics Ganesh S. Hegde

3

ISBN: 978-81-318-0305-9


SIZE: 71

49

1

2′′ × ′′

PAGES: 147

PRICE: Rs. 75.00


1. Introduction; 2. Inventory; 3. Forecasting; 4. Purchase Organization; 5. Stores Management;6. Problems and Solutions.Time and Motion Study7. Industrial Engineering; 8. Time and Motion Study Practicals.

9. Materials Management Dr. A.K. Singh

ISBN: 81-318-0077-6

EDITION: 2007

SIZE: 71

49

1

2′′ × ′′

PAGES: 367

PRICE: Rs. 295.00

10. Robot Modeling and Kinematics Rachid Manseur

1. Introduction; 2. Object Location; 3. Robot Modeling; 4. Forward Kinematics; 5. InverseKinematics; 6. Kinematics of 4-Joint Robot Arms; 7. Kinematics of Five-Joint Robots;8. Kinematics of Six-Joint Robot Arms; 9. The Jacobian and Velocity Kinematics; 10. RobotSingularities and Redundant Arms; Appendix A: About the CD-ROM; Appendix B: VRMLand 3D Visualization; Appendix C: Mathematics Review; Appendix D: TrigonometricEquations.

ISBN: 81-7008-802-X

EDITION: 2006

SIZE: 71

49

1

2

′′×

′′

PAGES: 271

PRICE: Rs. 195.00

1. AutoCAD Basics; 2. Organizing a Work Session in AutoCAD; 3. Techniques for Workingin AutoCAD; 4. Creating Two-Dimensional Drawings in AutoCAD; 5. Three-DimensionalProjections in AutoCAD; 6. Solid Modeling in AutoCAD; 7. Generating Views for Solid Models.

11. Autocad 2005 for Engineers Ionel Simion

ISBN: 978-81-318-0613-5

EDITION: Second, 2006

SIZE: 71

49

1

2′′ × ′′

PAGES: 1152

PRICE: Rs. 450.00

1. Concepts and Mechanism of Heat Flow; 2. Conduction Basic Equations; 3. Steady StateConduction without Heat Generation; 4. Steady State Conduction with Heat Generation;5. Heat Transfer From Extended Surfaces; 6. Transient Heat Conduction; 7. Principles of Con-vection; 8. External Flow; 9. Internal Flow; 10. Natural Convection; 11. Condensation andBoiling 12. Thermal Radiation: Properties and Processes; 13. Radiation Exchange betweenSurfaces; 14. Heat Exchangers; 15. Mass Transfer; 16. Experiments in Engg. Heat Transfer.

12. Engineering Heat and Mass Transfer Mahesh M. Rathore

4


ISBN: 81-318-0000-8

EDITION: Fourth, 2007

SIZE: 71

49

1

2

′′×

′′

PAGES: 1092

PRICE: Rs. 450.00

1. Simple Stresses and Strains; 2. Elastic Constants; 3. Principal Stresses and Strains; 4. StrainEnergy and Impact Loading; 5. Centre of Gravity and Moment of Inertia; 6. Shear Force andBending Moment; 7. Bending Stresses in Beams; 8. Shear Stresses in Beams; 9. Direct andBending Stresses; 10. Dams and Retaining Walls; 11. Analysis of Perfect Frames; 12. Deflectionof Beams; 13. Deflection of Cantilevers; 14. Conjugate Beam Method, Propped Cantilevers andBeams; 15. Fixed and Continuous Beams; 16. Torsion of Shafts and Springs; 17. Thin Cylindersand Spheres; 18. Thick Cylinders and Spheres; 19. Columns and Struts; 20. Riveted Joints;21. Welded Joints; 22. Rotating Disces and Cylinders; 23. Bending of Curved Bars; 24. Theoriesof Failure; 25. Objective Type Questions.

13. A Textbook of Strength of Materials Dr. R.K. Bansal

ISBN: 81-318-0058-X

EDITION: Third, 2007

SIZE: 71

49

1

2

′′×

′′

PAGES: 940

PRICE: Rs. 375.00

Introduction to SI Units and Conversion Factors1. Introduction—Outline of Some Descriptive Systems; 2. Basic Concepts of Thermodynamics;3. Properties of Pure Substances; 4. First Law of Thermodynamics; 5. Second Law ofThermodynamics and Entropy; 6. Availability and Irreversibility; 7. Thermodynamics Relations;8. Ideal and Real Gases; 9. Gases and Vapour Mixtures ; 10. Psychrometrics; 11. ChemicalThermodynamics; 12. Vapour Power Cycles; 13. Gas Power Cycles; 14. Refrigeration Cycles;15. Heat Transfer; 16. Compressible Flow.

14. A Textbook of Engineering Thermodynamics R.K. Rajput

ISBN: 978-81-318-0251-9


SIZE: 71

49

1

2

′′×

′′

PAGES: 327

PRICE: Rs. 150.00

1. Introduction to Materials Handling; 2. Material Handling Equipments; 3. Principles of MaterialsHandling Equipments; 4. Selection of Material Handling Equipment; 5. Materials Handling andRole of Management; 6. Economics of Material Handling; 7. Cranes Used for Material Handling;8. Conveyors; 9. Lifts and Elevators; 10. Industrial Trucks; 11. Pallets and Containers; 12. AerialCableways and Tramways; 13. Sorting Systems; 14. Storage Systems; 15. MiscellaneousEquipments; 16. Maintenance of Material Handling Equipments; 17. Robots in Material Handling;18. Manual Handling; 19. Safety in Handling; 20. Design of MH Equipments.

15. Aspects of Materials Handling Dr. K. C. Arora, Vikas V. Shinde

ISBN: 81-318-0066-0


SIZE: 71

49

1

2

′′×

′′

PAGES: 1027

PRICE: Rs. 350.00

1. Basic Concepts of Thermodynamics; 2. Introduction to Internal Combustion Engines; 3. AirStandard Cycles; 4. Fuel-Air and Actual Cycles; 5. Combustion in S. I. Engines; 6. Combustionin C. I. Engines; 7. Air Capacity of Four Strock Engines; 8. Two Stroke Engines; 9. ChemicalThermodynamics and Fuels (Conventional and Alternative); 10. Fuel/Air Mixture Requirements;11. Carburetion and Carburettors; 12. Fuel Injection Systems for C.I. Engines; 13. IgnitionSystems (S.I. Engines); 14. Engine Friction and Lubrication; 15. Engine Cooling;16. Supercharging of I.C. Engines; 17. Testing and Performance of I.C. Engines; 18. Air Pollutionfrom I. C. Engines and Its Control; 19. Miscellenous Engines; 20. Air Compressors; 21. GasTurbines and Jet Propulsion.

16. A Textbook of Internal Combustion Engines R. K. Rajput

5


1. Concept of Manufacturing; 2. Casting Processes; 3. Metal Forming Processes; 4. PowderMetallurgy; 5. Processing of Plastics; 6. Ceramic and Composite Materials—Their Structure,Properties and Processing; 7. Welding and Allied Processes; 8. Metal Cutting; 9. MachineTools and Machining Processes; 10. Thread Manufacturing; 11. Gear Manufacturing;12. Unconventional Machining Processes; 13. Machine Tools Testing; 14. Numerical Control ofMachine Tools and CAD/CAM; 15. Automatic Machines; 16. Jigs and Fixtures; 17. Metrology;18. Economics of Machining and Manufacturing;

RECENT TRENDS IN MANUFACTURING19. Need for Integration of Design and Manufacturing; 20. Elements of Integrations; 21. Productand Process Design for Integration; 22. Computer Aided Process Planning; 23. GroupTechnology

ADDITIONAL TOPICS24. Inspection and Quality Control; 25. Maintenance Management, Work Study and MIS.

ISBN: 978-81-318-0244-1


SIZE: 71

49

1

2′′ × ′′

PAGES: 947

PRICE: Rs. 350.00

17. A Textbook of Manufacturing Technology (Manufacturing Processes) R. K. Rajput

ISBN: 978-81-318-0592-3


SIZE: 71

49

1

2′′ × ′′

PAGES: 348

PRICE: Rs. 200.00

1. Automation; 2. Basic Laws and Principles; 3. Basic Pneumatic and Hydraulic System;4. Pumps and Compressors; 5. Fluid Accessories; 6. Cylinders and Motors; 7. Control Valves;8. Circuits; 9. Pneumatic Logic Circuits; 10. Fluidics; 11. Electrical and Electronic Controls;12. Transfer Devices and Feeders; 13. Robotics; 14. Robotic Sensors; 15. Robot End Effectors;16. Robot Programming; 17. Application of Robots.

18. Industrial Automation and Robotics A. K. Gupta, S. K. Arora

ISBN: 978-81-318-0295-3


SIZE: 71

49

1

2′′ × ′′

PAGES: 796

PRICE: Rs. 350.00

ISBN: 81-318-0100-4


SIZE: 71

49

1

2′′ × ′′

PAGES: 241

PRICE: Rs. 95.00

1. Fundamentals of Vibrations; 2. Free Vibrations of Single Degree of Freedom System;3. Damped Free Vibrations (Single Degree of Freedom Systems); 4. Harmonically ExcitedVibrations; 5. Rotor Unbalance; 6. Two Degree of Freedom Systems; 7. Co-ordinate Coupling;8. Multidegree of Freedom Systems; 9. Vibrations of Continuous System; 10. TransientVibrations; 11. Non-Linear Vibrations; 12. Lagrange’s Equations.

19. Theory and Applications of Mechanical Vibrations Dilip Kumar Adhwarjee

1. System of Forces; 2. Trusses; 3. Centroids and Moments of Inertia; 4. Friction;5. Transmission of Power; 6. Lifting Machines; 7. Kinematics; 8. Shear Force and BendingMoment Diagrams; 9. Kinetics of a Particle-Rectilinear Motion; 10. Kinetics of a Particle-Curvilinear Motion; 11. Centre of Gravity and Mass Moment of Inertia; 12. Kinetics of RigidBodies; 13. Work-Energy Method; 14. Impulse-Momentum Method; 15. Collision of ElasticBodies.

20. Engineering Mechanics Dr. I.S. Gujral

6


ISBN: 978-81-318-0518-3


SIZE: 71

49

1

2′′ × ′′

PAGES: 242

PRICE: Rs. 140.00

1. Introduction to Robotics; 2. Structure of Robotic System; 3. Robot Motion Analysis; 4. RobotArm Statics and Dynamics; 5. Robot Control System; 6. Trajectory Planning; 7. Robot Sensorsand Vision; 8. Robot Programming.

21. A Textbook on Industrial Robotics Ganesh S. Hegde

ISBN: 81-7008-991-3


SIZE: 71

49

1

2′′ × ′′

PAGES: 960

PRICE: Rs. 350.00

1. Introduction; 2. Power Unit-Automobile Engineers; 3. Fuel Supply System; 4. Engine Frictionand Lubrication Systems; 5. Cooling Systems; 6. Chassis and Suspension; 7. TransmissionSystem; 8. Steering and Front Axle; 9. Braking System; 10. Automotive Electrical System;11. Maintenance and Troubleshooting of Automobile; 12. Miscellany.

22. A Textbook of Automobile Engineering R.K. Rajput

ISBN: 978-81-318-0294-6


SIZE: 71

49

1

2′′ × ′′

PAGES: 501

PRICE: Rs. 225.00

1. Properties of Fluids; 2. Pressure and its Measurement; 3. Hydrostatic Forces on SubmergedSurfaces; 4. Buoyancy and Floatation; 5. Fluid Kinematics; 6. Dimensional Analysis; 7. FluidDynamics; 8. Fluid Flow Measurements; 9. Flow Through Pipes; 10. Viscous Flow; 11. Flow PastImmersed Bodies; 12. Compressible Flow.

23. A Textbook of Fluid Mechanics Dr. R.K. Bansal

1. Equilibrium, Stress, Strain and Deformation of Solids; 2. Bending of Beams and Torsion;3. Fluid Concepts, Kinematics and Dynamics; 4. Incompressible Fluid Flow; 5. Hydraulic Turbinesand Pumps.

ISBN: 81-318-0095-4


SIZE: 71

49

1

2

′′×

′′

PAGES: 810

PRICE: Rs. 325.00

24. Solid and Fluid Mechanics Dr. R. K. Bansal

7

�� MECHANICAL ENGINEERING

ISBN: 978-81-318-0620-3


SIZE: 71

49

1

2

′′×

′′

PAGES: 96

PRICE: Rs. 75.00

(For Visveswaraiah Technological University, Karnataka)

1. Thermal Conductivity of Metal Rod (Copper); 2. Composite Wall Apparatus; 3. Heat TransferThrough Pin Fin Apparatus; 4. Free or Natural Convection; 5. Forced Convection; 6. EmissivityMeasurement; 7. Stefan Boltzmann Apparatus; 8. Parallel Flow and Counter Flow HeatExchanger; 9. Boiling and Condensation; 10. Vapour Compression Refrigeration Test Rig;11. Air Conditioning Test Rig; 12. Transient Heat Conduction.

25. Heat Transfer Laboratory Manual Abdul Matheen

ISBN: 81-7008-943-3


SIZE: 71

49

1

2′′ × ′′

PAGES: 274

PRICE: Rs. 125.00

1. Metal Casting Processes; 2. Fabrication Processes; 3. Bulk Deformation Processes; 4. SheetMetal Forming Process; 5. Forming and Shaping of Plastics.

26. Manufacturing Technology - I C. Elanchezhian, B. Vijaya Ramnath

ISBN: 81-7008-922-0


SIZE: 71

49

1

2

′′×

′′

PAGES: 467

PRICE: Rs. 225.00

1. Theory of Metal Cutting; 2. Centre Lathe and Special Purpose Lathe; 3. Reciprocating Machine;4. Milling Machine; 5. Hole Making Processes, Drilling, Boring, Reaming, Topping; 6. AbrasiveProcess (Grinding); 7. Sawing Machine; 8. Broaching Machine; 9. CNC Machine Tools and PartProgramming.

27. Manufacturing Technology - II Dr. R. Kesavan, B. Vijaya Ramnath

ISBN: 81-318-0072-5


SIZE: 71

49

1

2′′ × ′′

PAGES: 570

PRICE: Rs. 295.00

1. Cad/Cam Interface; 2. Fundamentals of CNC Machines; 3. Constructional Features of CNCMachines; 4. Part Programming For CNC Machines; 5. Production Planning And Control.

28. Computer Aided Manufacturing C. Elanchezhian, T. Sunder Selwyn, G. Shanmuga Sundar

8

MECHANICAL ENGINEERING ��

ISBN: 81-7008-961-1


SIZE: 71

49

1

2

′′×

′′

PAGES: 333

PRICE: Rs. 150.00

(For Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal )

1. Materials of Construction; 2. Foundry Practice; 3. Measurement and Measuring Tools;4. Welding Practice; 5. Machine Tools; 6. Basics Concepts and Important Definitions used inThermodynamics; 7. Properties of Steam; 8. Boilers; 9. Steam Engine; 10. Internal CombustionEngines.

29. Basic Mechanical Engineering Mohan Sen

ISBN: 81-7008-418-0


SIZE: 71

49

1

2

′′×

′′

PAGES: 1131

PRICE: Rs. 475.00

ISBN: 81-7008-957-3


SIZE: 71

49

1

2

′′×

′′

PAGES: 290

PRICE: Rs. 125.00

1. Crystal Structure; 2. Iron Carbon Equilibrium Diagram; 3. Heat Treatment; 4. Ferrous andNon-Ferrous Metals; 5. Mechanical Properties and Testing; 6. Non Metallic Materials;7. Hardenability and Testing; 8. Isothermal Transformation and Critical Cooling Transformation.

30. A Textbook of Engineering Materials and Metallurgy Dr. J.T. Winowlin Jappes, A. Alavudeen, N. Venkatashwaran

1. Introduction; 2. Motion of Inertia; 3. Velocity of Points in Mechanism; 4. Acceleration inMechanism; 5. Mechanism with Lower Pairs ; 6. Friction; 7. Belts, Ropes and Chain Drives;8. Brakes and Dynamometers; 9. Gears; 10. Gear Trains; 11. Inertia Forces in ReciprocatingParts; 12. Turning Moment Diagrams; 13. Balancing of Rotating Masses; 14. Balancing ofReciprocating Masses; 15. Governors; 16. Vibrations (Longitudinal and Transverse); 17. TorsionalVibrations; 18. Cams; 19. Computer-Aided Analysis of Mechanisms; 20. Synthesis of Mechanism;21. Gyroscopic Effects and Gyroscope.

31. A Textbook of Theory of Machines Dr. R.K. Bansal, Dr. J.S. Brar

ISBN: 81-7008-251-X


SIZE: 71

49

1

2

′′×

′′

PAGES: 664

PRICE: Rs. 295.00

Part A: Thermodynamics1. Basic Concepts of Thermodynamics; 2. First Law of Thermodynamics; 3. Second Law ofThermodynamics and Entropy; 4. Ideal and Real Gases; 5. Properties of Steam; 6. Gas PowerCycles; 7. Internal Combustion Engines

Part B: Strength of Materials8. Simple Stresses and Strains; 9. Principal Stresses and Strains; 10. Bending Stresses;11. Torsion of Circular Shafts.

32. Comprehensive Mechanical Engineering R.K. Rajput

9


ISBN: 978-81-318-0255-7


SIZE: 71

49

1

2′′ × ′′

PAGES: 1083

PRICE: Rs. 450.00

Introduction to SI Units and Conversion Factors; 1. Introduction; 2. Power Plant Cycles; 3. SteamPower Plant; 4. Diesel Engine Power Plant; 5. Gas Turbine Power Plants; 6. Hydro-electricPower Plant; 7. Nuclear Power Plant; 8. Combined Operation ofDifferent Power Plants; 9. Economics of Power Generation; 10. Non-Conventional Power Generation and Direct Energy Conversion;11. Plant Instrumentation; 12. Major Electrical Equipment in PowerPlants; 13. Pollution and Its Control.

33. A Textbook of Power Plant Engineering R.K. Rajput

Bestseller

15,000COPIES SOLD

ISBN: 978-81-318-0228-1


SIZE: 71

49

1

2

′′×

′′

PAGES: 410

PRICE: Rs. 125.00

(For MGU, Kerala)Module -1

1. Basic Concept of Thermodynamics; 2. First Law of Thermodynamics ; 3. Gas Power Cycles;Module-2

4. Internal Combustion Engines; 5. Refrigeration and Air Conditioning;Module-3

6. Power Transmission;Module-4

7. Power Plants, Non-Conventional Energy Sources, Hydraulic and Steam Turbines;Module-5

8. Machine Tools; 9. Manufacturing Processes.

34. Basic Mechanical Engineering R.K. Rajput

ISBN: 81-7008-311-7

EDITION: Ninth, 2005

SIZE: 71

49

1

2

′′×

′′

PAGES: 1093

PRICE: Rs. 450.00

1. Properties of Fluids; 2. Pressure and Its Measurement; 3. Hydrostatic Forces on Surfaces;4. Buoyancy and Floatation; 5. Kinematics of Flow and Ideal Flow; 6. Dynamics of Fluid Flow;7. Orifices and Mouthpieces; 8. Notches and Weirs; 9. ViscousFlow; 10. Turbulent Flow; 11. Flow Through Pipes; 12. Dimensionaland Model Analysis; 13. Boundary Layer Flow; 14. Forces onSubmerged Bodies; 15. Compressible Flow; 16. Flow in OpenChannels; 17. Impact of Jets and Jet Propulsion; 18. HydraulicMachines—Turbines; 19. Centrifugal Pumps ; 20. ReciprocatingPumps; 21. Fluid System.

35. A Textbook of Fluid Mechanics and Hydraulic Machines Dr. R.K. Bansal

ISBN: 81-318-0078-4


SIZE: 71

49

1

2

′′×

′′

PAGES: 573

PRICE: Rs. 250.00

(For Anna University, Tamilnadu)1. Basics of Statics of Particles; 2. Equilibirum of Rigid Bodies; 3. Friction; 4. Properties ofSurfaces and Solids; 5. Dynamics of Particles.

36. Engineering Mechanics Dr. R. K. Bansal

Bestseller

4,70,000COPIES SOLD

10

ISBN: 978-81-318-0309-7


SIZE: 71

49

1

2

′′×

′′

PAGES: 520

PRICE: Rs. 170.00

ISBN: 978-81-318-0574-9

EDITION: Fifth, 2009

SIZE: 71

49

1

2

′′×

′′

PAGES: 725

PRICE: Rs. 325.00


ISBN: 978-81-318-0409-4

EDITION: Fifth, 2008

SIZE: 71

49

1

2

′′×

′′

PAGES: 781

PRICE: Rs. 325.00

Part I : Statics1. Fundamentals of Engineering Mechanics; 2. Coplanar, Collinear and Concurrent Forces;3. Coplanar Parallel Forces; 4. Conditions of Equilibrium; 5. Support Reactions; 6. Analy-sis of Perfect Frames; 7. Centre of Gravity and Moment of Inertia; 8. Friction; 9. LiftingMachines; 10. Virtual Work; 11. Belts, Ropes and Chain Drives

Part II : Dynamics12. Kinematics of Linear Motion; 13. Kinematics of CurvilinearMotion, Circular Motion, Rotation and Translation; 14. Projectiles;15. Kinematics of Rigid Bodies and Laws of Motion; 16. SimpleHarmonic Motion and Mechanical Vibrations; 17. Collision of ElasticBodies; 18. Work, Power and Energy; 19. Forces in Space; 20. Beams(Shear Forces and Bending Moment)

37. A Textbook of Engineering Mechanics Dr. R.K. Bansal

Bestseller

20,000COPIES SOLD

(U.P. Technical University, Lucknow)1. Fundamentals of Engineering Mechanics; 2. Coplanar, Collinear and Concurrent Forces;3. Coplanar Parallel Forces and Varignon’s Theorem; 4. Conditions of Equilibrium and FreeBody Diagram; 5. Support Reactions 6. Truss (or Frames); 7. Centre of Gravity andMoment of Inertia; 8. Friction; 9. Beams (Shear Force and Bending Moment); 10. Kinematicsof Rigid Bodies; 11. Kinetics of Rigid Bodies 12. Simple Stresses and Strains; 13. ElasticConstants; 14. Strain Energy and Impact Loading; 15. Pure Bending of Beams; 16. Torsion ofShafts.

38. A Textbook of Engineering Mechanics Dr. R.K. Bansal

(Mahatma Gandhi University, Kerala)1. Forces in Plane, Equilibrium Conditions and Support Reactions; 2. Centre of Gravity, Momentof Inertia and Friction; 3. Truss and Simple Stress Strain; 4. Kinematics of Particles; 5. Kineticsof Particles.

39. Engineering Mechanics Dr. R.K. Bansal

ISBN: 81-318-0122-5

EDITION: 2004

SIZE: 71

49

1

2′′ × ′′

PAGES: 881

PRICE: Rs. 395.00

40. Engineering Mechanics and Strength of Materials Dr. R. K. Bansal

Part I - Engineering Mechanics

1. Fundamentals of Engineering Mechanics; 2. Coplanar, Collinear and Concurrent Forces;3. Coplanar and Parallel Forces; 4. Conditions of Equilibrium; 5. Support Reactions;6. Analysis of Perfect Frames; 7. Centre of Gravity and Moment of Inertia; 8. Friction;9. Lifting Machines; 10. Virtual Work; 11. Linear Motion, Circular motion and Projectiles;12. Laws of Motion and Simple Harmonic Motion; 13. Work, Power and Energy.

Part II - Strength of Materials

14. Simple Stresses and Strains; 15. Elastic Constants; 16. Principal Stresses and Strains;17. Strain Energy and Impact Loading; 18. Shear Force and Bending Moment; 19. Deflectionof Beams; 20. Deflection of Cantilevers; 21. Torsion of Shafts and Springs; 22. Thin Cyllindersand Sheres; 23. Columns and Struts; 24. Riveted Joints.

11


ISBN: 81-7008-833-X


SIZE: 71

49

1

2

′′×

′′

PAGES: 748

PRICE: Rs. 350.00

1. Introduction; 2. Stress Analysis; 3. Selection of Materials; 4. Design for Varying Loads;5. Fits, Allowances and Tolerances ; 6. Cotter and Knuckle Joints; 7. Levers; 8. Riveted Joints;9. (a) Threaded Fasteners, (b) Translation or Power Screws; 10. Welded Joints; 11. Springs—Helical and Leaf; 12. Shafting; 13. Couplings; 14. Belt, Rope and Chain Drives; 15. Brakesand Clutches; 16. Rotating Disc and Flywheel; 17. Pressure Vessels and Pipes; 18. Lubricationand Bearings; 19. Gearing; 20. Design of Internal Combustion Engine Components;21. Appendices.

41. A Textbook of Machine Design Dr. Rajendra Karwa

ISBN: 81-318-0129-2


SIZE: 71

49

1

2′′ × ′′

PAGES: 526

PRICE: Rs. 250.00

1. Basic Concepts of Thermodynamics; 2. First Law of Thermodynamics; 3. Second Law ofThermodynamics and Entropy; 4. Availability and Irreversibility; 5. Ideal and Real Gases;6. Gas Power Cycles; 7. Properties of Steam; 8. Basic Steam Power Cycles; 9. InternalCombustion Engines.

42. Thermal Science and Engineering R.K. Rajput

ISBN: 81-7008-190-4


SIZE: 71

49

1

2

′′×

′′

PAGES: 106

PRICE: Rs. 45.00

1. Introduction; 2. Fundamental Principles of Flow; 3. Flow Through Pipes; 4. Flow Measure-ments; 5. Velocity Measurements; 6. Hydraulic Machines; 7. Miscellaneous.

43. Fluid Mechanics and Hydraulic Machines (A Lab Manual) T.S. Desmukh

ISBN: 978-81-318-0472-8


SIZE: 71

49

1

2′′ × ′′

PAGES: 140

PRICE: Rs. 90.00

44. Industrial Engineering N.J. Manek

1. Industrial Engineering and Scientific Management; 2. Production, Productivity and theStandard of Living; 3. Work Study and Human Factors; 4. Working Environment and Safety;5. Plant Layout and Materials Handling; 6. Work Simplification; 7. Movement of Workersin the Plant; 8. Movements at the Work Place; 9. Work Measurement; 10. Time StudyTechniques; 11. Incentives; 12. Statistical Quality Control.

12


ISBN: 81-7008-236-6


SIZE: 71

49

1

2

′′×

′′

PAGES: 717

PRICE: Rs. 195.00

1. Basic Concepts of Thermodynamics; 2. First Law of Thermodynamics; 3. Second Law ofThermodynamics; 4. Ideal and Real Gases; 5. Gas Power Cycles; 6. Refrigeration Cycles;7. Properties of Pure Substances; 8. Basic Steam Power Cycles; 9. Steam Generators; 10. BoilerMountings and Accessories; 11. Draught; 12. Performance of Steam Generators; 13. Solder-ing, Brazing and Welding; 14. Machining Processes and Machine Tools; 15. SimpleStresses and Strains; 16. Principal Stresses.

45. Basic Mechanical Engineering R.K. Rajput

ISBN: 81-7008-192-0

EDITION: Sixth, 2001

SIZE: 71

49

1

2

′′×

′′

PAGES: 847

PRICE: Rs. 395.00

(Objective Type) (With Multiple Choice Questions and Answers)(Including Brief Theory)1. Fluid Mechanics and Hydraulic Machines; 2. Engineering Mechanics; 3. Thermodynamics;4. Internal Combustion Engines and Nuclear Power Plants; 5. Steam Boilers, Engines, Nozzlesand Turbines; 6. Compressors, Gas Turbines and Jet Engines; 7. Heat Transfer, Refrigerationand Air Conditioning; 8. Strength of Materials; 9. Theory of Machines; 10. Machine Design;11. Engineering Materials; 12. Production Engineering; 13. Industrial Engineering and ProductionManagement; 14. General Engineering; 15. Typical Objective Type Test Papers.

46. Mechanical Engineering Dr. R.K. Bansal

ISBN: 81-7008-580-2


SIZE: 71

49

1

2

′′×

′′

PAGES: 403

PRICE: Rs. 175.00

1. Thermodynamics; 2. Internal Combustion Engines and Nuclear Power; 3. Steam Boilers,Engines, Nozzles and Turbines; 4. Compressors, Gas Turbines and Jet Propulsion; 5. HeatTransfer; 6. Fluid Mechanics and Hydraulic Machine; 7. Theory of Machines; 8. MachineDesign; 9. Strength of Materials; 10. Metallurgy and Engineering Material; 11. ProductionTechnology; 12. Industrial Engineering.

47. Comprehensive Handbook of Mechanical Engineering Dr. J. Srinivas

13


ISBN: 81-7008-581-0


SIZE: 71

49

1

2

′′×

′′

PAGES: 1399

PRICE: Rs. 440.00

48. Comprehensive Production and Operations Management Dr. K.C. Arora

1. Introduction to Production & Operations Management; 2. System; 3. Product Engineering;4. Process Planning; 5. Capacity Planning; 6. Location of Facilities; 7. Facilities Planning/Layout; 8. Work System Design; 9. Work Study; 10. Materials Handling; 11. Ergonomics (HumanFactor Engineering); 12. Forecasting; 13. Production Manufacturing Systems; 14. ProductionPlanning and Control; 15. Project Planning by Network; 16. Evaluating Investment Alternatives;17. Maintenance; 18. Service Industries (Systems); 19. Just in Time; 20. Make or BuyDecision; 21. Materials Management; 22. Purchase Management; 23. Inventory Control; 24.Probability; 25. Inventory Models with Probabilistic Demand; 26. Stores Management; 27.Waste Management; 28. Assembly Line Balancing (1954); 29. Line of Balance Techniques forProduction Control; 30. Spare Parts; 31. Production Scheduling; 32. Sequencing; 33. Break-Even Analysis/Chart; 34. Costing; 35. Linear Programming; 36. Materials Requirement &Manufacturing Resource Planning; 37. Queueing/Waiting Line Theory; 38. Maintainability; 39.Learning Curves; 40. Selection of Vendors; 41. Standardization; 42. Supply Chain Management& ERP; 43. Agile and Virtual Manufacturing for Mass Customerization; 44. Mechanatronics; 45.Simulation; 46. Logistics; 47. Synchronous Production and Theory of Constraints; 48. ValueAdded/Directed Management; 49. Strategic Management; 50. Total Cost Management; 51.Assignment Problem; 52. Introduction to ISO 9000 and Total Quality Management; 53. ManagingInformation for Production System; Examination Papers.

ISBN: 978-81-318-0602-9


SIZE: 71

49

1

2

′′×

′′

PAGES: 617

PRICE: 225.00

(For MDU, GJU and KU, Haryana)Unit I

1. Properties of Steam; 2. Boilers; 3. Steam Turbines; 4. Steam Condenser

Unit II5. Internal Combustion Engines; 6. Gas Power Cycle; 7. Gas Turbines; 8. Hydraulic Turbines,Pumps and Hydraulic Devices

Unit III9. Simple Lifting Machines; 10. Transmission of Power; 11. Clutches, Brakes and Dynamometers

Unit IV12. Simple Stresses and Strains; 13. Principal Stresses and Strains; 14. Bending Moments andShearing Forces.

49. Elements of Mechanical Engineering R.K. Rajput

ISBN: 978-81-318-0614-2


SIZE: 71

49

1

2

′′×

′′

PAGES: 293

PRICE: Rs. 150.00

1. Introduction; 2. Properties of Metals; 3. Ferrous Metals and Alloys; 4. Non-ferrous Metalsand Alloys; 5. Carpentry Shop; 6. Bench Work and Fitting Shop; 7. Welding Shop; 8. SheetMetal Shop; Additional Objective Type Questions (with Answers).

50. Workshop Practice R.K. Rajput

14


ISBN: 81-7008-400-8


SIZE: 71

49

1

2

′′×

′′

PAGES: 376

PRICE: Rs. 145.00

ISBN: 978-81-318-0222-9


SIZE: 71

49

1

2

′′×

′′

PAGES: 600

PRICE: Rs. 150.00

51. Elements of Mechanical Engineering R.K. Rajput

(For Punjab Technical University, Jalandhar )

Part A—Thermal Science

1. Basic Concepts of Thermodynamics; 2. First Law of Thermodynamics; 3. Second Law ofThermodynamics and Entropy; 4. Availability and Irreversibility.

Part B—Applied Mechanics

5. Gas Power Cycles; 6. Internal Combustion Engines; 7. Mechanics and Simple Mechines;8. Mechanics of Solids; Additional Typical Worked Examples; PTU Question Papers—WithSolutions.

(For Punjab Technical University, Jalandhar )

Introduction; 1. Carpentry and Pattern Making Shop; 2. Foundry Shop; 3. Forging Practice;4. Machine Shop; 5. Welding Shop; 6. Electrical and Electronic Shop; 7. Sheet Metal Shop;8. Bench Work and Fitting Shop; Additional Objective Type Questions.

52. Comprehensive Manufacturing Practice R.K. Rajput

ISBN: 81-7008-544-6


SIZE: 71

49

1

2

′′×

′′

PAGES: 200

PRICE: Rs. 80.00

(For Visveswaraiah Technological University, Karnataka)

1. Concept of Project Management; 2. Project Planning and Estimation; 3. Organising andStaffing The Project Team; 4. Project Scheduling; 5. Tools and Techniques of Project Management;6. Co-ordination and Control; 7. Performance Measures in Project Management; 8. Case Studieson Project Management.

53. Comprehensive Project Management Abdul Matheen

ISBN: 978-81-318-0504-6


SIZE: 71

49

1

2

′′×

′′

PAGES: 518

PRICE: Rs. 250.00

1. Introduction; 2. Plant and Shop Layout; 3. Industrial Safety; 4. Fundamentals of Metalsand Alloys; 5. Properties of Engineering Materials; 6. Testing and Inspection of Metals;7. Ferrous Metals and Alloys; 8. Non-ferrous Metals and Alloys; 9. Heat Treatment of Metaland Alloys; 10. Bench Work and Fitting; 11. Smithy and Forging; 12. Sheet Metal Work;13. Wood and Wood Working (Carpentary); 14. Pattern Making; 15. Foundry Tools andEquipments; 16. Moulding and Core Making; 17. Special Casting Methods; 18. Casting Defects,Cleaning and Inspection; 19. Welding : A Fabrication Process; 20. Gas Welding; 21. ArcWelding; 22. Resistance Welding; 23. Solid State Welding; 24. Thermo Chemical Welding;25. Radiant Energy Welding; 26. Braging, Braze Welding and Soldering; 27. Welding Defects;28. Mechanical Working of Metals; 29. Machine Tools (Introduction); 30. Plastics.

54. Workshop Technology (Manufacturing Processes) S.K. Garg

15

ISBN: 81-7008-433-4

EDITION: 2003

SIZE: 71

49

1

2

′′×

′′

PAGES: 403

PRICE: Rs. 125.00

ISBN: 81-7008-641-8

EDITION: 2005

SIZE: 71

49

1

2

′′×

′′

PAGES: 426

PRICE: Rs. 145.00


ISBN: 81-7008-955-7


SIZE: 71

49

1

2

′′×

′′

PAGES: 678

PRICE: Rs. 250.00

(For U.P. Technical University, Lucknow)

Part A: Thermodynamics1. Basic Concepts of Thermodynamics; 2. First Law of Thermodynamics; 3. Second Lawof Thermodynamics and Entropy; 4. Ideal and Real Gases; 5. Properties of Steam; 6. GasPower Cycles; 7. Internal Combustion Engines.

Part B: Mechanics and Strength of Materials

8. Basic Concepts of Mechanics and Force Systems; 9. Friction; 10. Bending Moments andShearing Forces; 11. Analysis of Trusses; 12. Simple Stresses and Strains; 13. Principle Stressesand Strains; 14. Bending Stresses; 15. Torsion of Circular Shafts.

55. Mechanical Engineering R.K. Rajput

ISBN: 978-81-318-0448-3


SIZE: 71

49

1

2

′′×

′′

PAGES: 598

PRICE: Rs. 200.00

(For Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal)Unit I: Materials

1. Engineering Materials and their Testing.Unit II: Fluids

2. Basic Concepts of Fluid and Fluid Machines.Unit III: Measurement

3. Measurement of Temperature, Pressure, Flow etc.; 4. Measuring Tools; 5. Machine Tools.Unit IV: Thermodynamics

6. First Law of Thermodynamics; 7. Second Law of Thermodynamics; 8. Boilers; 9. Steamand its Properties; 10. Refrigeration Cycles.

Unit V: Reciprocating Machines11. Steam Engines; 12. Gas Power Cycles; 13. Internal Combustion Engines;Laboratory Experiments.

56. Basic Mechanical Engineering R. K. Rajput

(Swami Vivekanand University)1. Fundamentals and Definitions; 2. Properties of Pure Substances; 3. First Law ofThermodynamics; 4. Second Law of Thermodynamics and Entropy; 5. Availability andIrreversibility; 6. Thermodynamics Relations; 7. Ideal and Real Gases; 8. Gases and VapourMixtures.

57. Comprehensive Engineering Thermodynamics R. K. Rajput

(VTU, Bangalore)1. Sources of Energy; 2. Steam Formation and Boilers; 3. Prime Movers; 4. Refrigerationand Airconditioning; 5. Machine Tools; 6. Soldering, Brazing and Welding; 7. Bearings andLubrication; 8. Transmission of Power; 9. Mechatronics.

58. Comprehensive Elements of Mechanical Engineering R. K. Rajput

113, Golden House, Daryaganj, New Delhi-110002

Phone: 011-43 53 25 00, Fax: 011-43 53 25 28

E-mail: [email protected] Website: www.laxmipublications.com


Domestic Orders

ORDER AND DISTRIBUTION INFORMATION

International Orders

UBS Export Division

• DelhiTel : 011-2327-3601,

2326-6646Fax : 011-2327-6593, 2327-4261E-Mail : [email protected]

Students’ Agencies (I) Pvt. Ltd.

UBS Publishers’ Distributors Pvt. Ltd.

•Tel. : 022-40496161, 2351-3332Fax : 022-40496131E-Mail : [email protected]

• DelhiTel. : 011-2327-3601-4, 2326-6645-47Fax : 011-2327-6593, 2327-4261E-mail : [email protected]

• BangaloreTel. : 080-2225-3903, 2226-3901-2

22255153Fax : 080-2226-3904E-mail : [email protected]

• BhopalTel. : 0755-4203-183, 4203-193Fax : 0755-2555-285E-mail : [email protected]

• ChennaiTel. : 044-2374-6222, 2374-6351-2Fax : 044-2374-6287E-mail : [email protected]

• ErnakulamTel. : 0484-2353-901, 2363-905Fax : 0484-2365-511E-mail : [email protected]

• HyderabadTel. : 040-24754472, 73, 74Fax : 040-2475-4472E-mail : [email protected]

Mumbai

• KolkataTel. : 033-2252-1821, 2252-9473 Fax : 033-2252-3027E-mail : [email protected]

• LucknowTel. : 0522-4025124, 4025134Fax : 0522-4025144E-mail : [email protected]

• MumbaiTel. : 022-6637-6922-6637-6923

66102069, 66102067, 66028017Fax : 022-6637-6921E-mail : [email protected]

• PatnaTel. : 0612-2672-85-6, 2673-97-3

2686-17-0Fax : 0612-2686-16-9E-mail : [email protected]

• PuneTel. : 020-2446-1653Fax : 020-2443-3976E-mail : [email protected]

• MumbaiTel. : 022-2282-6558Fax : 022-2285-1109E-Mail : [email protected]

• PuneTel. : 020-2443-0790Fax : 020-24431938E-Mail : [email protected]

• NagpurTel. : 0712-2566777E-Mail : [email protected]

International Book House Pvt. Ltd.

• DelhiTel. : 011-2324-3815-16Fax : 011-4354-2746E-Mail : [email protected]

• AhmdabadTel. : 079-3007-5040Fax : 079-2646-4882E-Mail : [email protected]

• DelhiTel. : 011-2325-9161,

2328-2098, 2327-1887Fax : 011-2326-2021E-mail : [email protected]

[email protected]

• DelhiTel. : 011-3249-6150,4156-4445Fax : 011-4156-4440E-Mail : [email protected]

[email protected]

• DelhiTel. : 011-2327-6862Fax : 011-4355-1008E-Mail : [email protected]

• MeerutTel. : 0121-2700-304,2700-637Fax : 0121-2704-805E-Mail : [email protected]

Asian Books Private Limited

JBC Publishers' Distributors

Savera Book Distributors

visit us at www.laxmipublications.com


113, Golden House, Daryaganj, New Delhi-110002Phone: 011-43 53 25 00, Fax: 011-43 53 25 28E-mail: [email protected]

BRANCHES

Bangalore 129/1, IIIrd Main Road, IX Cross, Chamrajpet, Bangalore-560018Tel.: 080-2661-1561-62 • Fax: 080-2661-1561E-mail: [email protected]

Chennai 26, Damodaran Street, T. Nagar, Chennai-600017, Tamil NaduTel.: 044-2434-4726 • Fax: 044-2434-4726E-mail: [email protected]

Cochin 43/1394D, St. Benedict’s Road, Ernakulam North, Cochin-682018, KeralaTel.: 0484-2397-004 • Fax: 0484-2397-004E-mail: [email protected]

Guwahati Pan Bazar, Rani Bari, Guwahati-781001Tel.: 0361-2543-669, 2513-881 • Fax: 0361-2639-740E-mail: [email protected]

Hyderabad No. 104, Ist Floor, Madhiray Kaveri Tower, 3-2-19, Azim Jahi Road, Nimboliadda, Hyderabad-500027, A.P.Tel.: 040-2465-2333E-mail: [email protected]

Jalandhar Adda Tanda Chowk, ND-365, Jalandhar City, PunjabTel.: 0181-2221-272 • Fax: 0181-2221-272E-mail: [email protected]

Kolkata R.D.B. Chambers (Formerly Lotus Cinema) 106/A, Ist Floor, S.N. Banerjee Road, Kolkata-700014Tel.: 033-2227-4384 • Fax: 033-2227-3773E-mail: [email protected]

Lucknow 18, Madan Mohan Malviya Marg, Lucknow-226001Tel.: 0522-2209-578 • Fax: 0522-2204-098E-mail: [email protected]

Mumbai 142-C, Victor House, Ground Floor, N.M. Joshi Marg, Lower Parel (W), Mumbai-400013Tel.: 022-2491-5415, 2492-7869 E-mail: [email protected]

Ranchi Radha Govind Street, Tharpagna, Ranchi-834001Tel.: 0651-2214-764E-mail: [email protected]

books mechanical engineering

Documents