Book Trolleymore efficient to return the book

讓圖書館工作人員更有效率的進行書本歸架。

圖書館人員在將書本歸位時，不但同一條道

路來回走很多次，而且每次都要推著一整車

的近百本書穿梭在書架之間狹小的空間中。

我們的概念是以單元體書箱堆疊形成書車為

主，平時就放置於圖書館走道上或櫃台，讓

讀者或圖書館人員將歸還的書本放入，而圖

書館人員只需要將滿載的書箱拆下，三個為

一組堆疊成另外一台書車，立即推走，或在

根據索書號歸類後，將書箱中鄰近的書類堆

疊成同一車，也可以只需要抱著一個書箱穿

梭在狹小的走道空間。

Let library staffs organize books more efficiently. Library staffs return books to the right place of bookshelf ,and walk the back and forth,each time they shuttle a trolley full of books in the tight space between bookcases, even directly take the books off the trolley and hold them in the arm, so the existing book trolley can not be a good tool.

Our concept is based on a moduler stacked together to become the main trolly, usually place in the library hallway or counter, the reader or library staffs can return the books there into it and then the library staffs just need to remove the box.

Three book boxes stacked up into another book trolley then can be pushed away immediately. After books classified, stack up the book boxes that close to it. you can hold a book box shuttling in the narrow aisle space too.

Design Concept

Turn the handle on the shaft that h a n d l e c a n b e linking with beside other book trolley.

The structure of t enon on book trolley can buckle up and down.

Special design for moving and parkingin back of trolley.

When reader can not find the shelves they can place the book on it to let library staff return.

The book trolley can be picked one up or be fabriced into another book trolley.

It can be picked upjust one and walk in narrow aisle.

1. 2. 3.

Product's Capability And Use Steps Concept Sketch

Concept 3D Image