USER MANUAL©2016 BÖHM Inc. All rights reserved.

Thank you for selecting the BÖHM SoundBar. It features top of the line sound and dynamic bass. Quality sound and beautiful design are combined to suit the daily listeners. Please read the user manual prior to using the BÖHM SoundBar.

Special Features•••••••••

Novel appearance with perfect surface finishingSlim and stylish, the compact SoundBar was designed to fit almost anywhereCompatible with the latest MP3 / PC / Mobile Phone / LCD / LED TVSoundBar’s multi audio source input makes it the ideal choice for home theaterStereo Audio System with high fidelitySupports Bluetooth 4.0Built-in advanced full range top quality speakers3 Play Modes: Music / Movie / Night (Sound effect varies for for each mode)Supports BT / AUX / Optical / TV / Remote Control

Product Specifications•

•••

Power Supply: AC 110V - 240V / 50Hz, DC 13.6VPower Consumption: 60WDriver Unit: (2.5” x 4) + (1.5” x 2)Frequency Respond: 20Hz - 20kHz

••••

Impendence: 4ΩSNR: ≥95dBStereo Unbalance: ≤2dBDistortion Factor : THD ≤1%

Reset

VOL+

BASS+

TREB+BT

OPTAUX2

TREB-

AUX1

NIGHTMOVIEMUSIC

VOL-

BASS-

Inside the BoxPlease remove all items from the package. The following items are included. The BÖHM Soundbar, a remote control, a 3.5mm to 3.5mm audio cable, screws & stands, a optical cable, the wall bracket, and the user manual.

1 BÖHM Soundbar

2 Remote Control

4 Screws & Stands

3 3.5mm to 3.5mm Audio Cable

5 Optical Cable

7 User Manual

6 Wall Bracket

Remote ControlPower

Mute

Bass Up

Reset

Bass Down

Treble UpTreble Down

Bluetooth

Optical

Night

Movie

AUX

Music

VolumeUp / Down

Product Overview

Reset

VOL+

BASS+

TREB+BT

OPTAUX2

TREB-

2

4

5

6

10

8

1

3

5

6

7

9

11

12

AUX1

NIGHTMOVIEMUSIC

VOL-

BASS-

LED Indicator Light

POWER AUX2 AUX1 BTOPTICAL

1 2 3 4 5 6

AUX: Compatible with TV, MP3, Mobile Phone, and Computers, etc.ON / OFF: Turn on / off to boot or shut down unitOptical: Compatible with TVDC IN: Please use the supplied power adapter

•

•

••

Back Panel Interface Connection

OPTICALAUX1AUX2 DC IN

ON / OFF

123456

PowerAUX2AUX1OpticalBluetoothRemote Control Receiver

R

L

AUX1

Note: When the audio source is connected to any interface, please switch to the corresponding connection interface with remote control. Under the standby status, it can remember the last input channel when booting on or off the unit.

BACK OF SOUNDBAR

TV MONITOR

MP3 PLAYER

3.5mm to 3.5mmAUDIO CABLE

Connecting to the Soundbar

OPTICAL

For Optical (SPDIF) Connection:Connect the TV’s optical output socket to the soundbar’s OPTICAL in socket with the included Optical Cable.

If there is no sound when using an optical cable:

*†

Other devices may include Blu-Ray players, set-top boxes, and etc.Settings menu selections may vary depending on your device. Select the menu setting that best resembles the ones mentioned.

1234

Enter your TV’s* settings menu.Select the Audio or Sound Settings option.†

Select the Audio Out or Digital Out setting.†

Change setting to PCM.

input AC 110V-240V/50Hz, output DC 13.6V

Optical DC In

On

Off

Aux1Aux2

OPTICALAUX1AUX2 DC IN

AUX 2 Connection AUX1RCA STEREOAUDIO CABLE

AUX1 Connection

OPTICAL CABLE

OpticalConnection

For AUX1 Connection:Connect the TV’s Stereo RCA (L/R) Audio output socket to the soundbar’s AUX1 sockets with a RCA Stereo Audio Cable.

*Please connect the audio cables before switching on the unit.

Once unit is plugged in and switched to Bluetooth status, soundbar will automatically activate Bluetooth. The blue LED light on soundbar will flash rapidly to specify that the unit has already entered bluetooth matching status. Open your player then follow the program prompts to search for the sound bar. A pop up dialogue window will appear for you to input password (the matching password of this unit is 0000.) After syncing with the device, the blue indicator light will start to flash gradually with or without “DI” prompts. At that moment, you can play the music.

Please make sure to use a Bluetooth enabled device before you attempt to connect to sound bar via Bluetooth. Turn on your Bluetooth function to match your device with the sound bar.

Search for Bluetooth Device

Instructions to Sync Bluetooth

ADAPTER

BACK OF SOUNDBAR

MAIN SOCKET

input AC 110V-240V/50Hz, output DC 13.6V

Optical DC In

On

Off

Aux1Aux2

Ensure all audio connections of the unit are connected before connecting to the mains power socket.Unplug the power cord from the outlet when the unit is not in use for an extended period of time.

Important•

•

Ensure that the power supply is at a voltage of 100V-240V This unit is designed to use an adapter.Connecting the unit to any other power source may cause damage to the unit. Unwind the adapter to its full length prior to connecting to the main socket. Make sure the plug is fully inserted into the socket.Lastly, connect the adapter to the soundbar’s power socket.

•••

•

For Main Supply Connection

For AUX2 Connection:Connect the audio device’s headphone socket to the soundbar’s AUX2 socket with the 3.5mm to 3.5mm Audio Cable.

This function is based on the conditions that this unit is the last Bluetooth device connected. After booting on Bluetooth, it will automatically connect with the device within 6 to 8 seconds without inputting password.

Autosync Bluetooth

Caution: Only qualified staff should install unit to avoid personal injury and damage to the unit.

Sound Bar Installation

Make sure all essentials cables are connected to the sound bar.

Note: Please install the unit under the Television. Leave at least 10cm (4 inches) space between bracket and the TV.

Sound Bar PlacementIn order to ensure the best sound effect, it is very important to place the unit correctly. Place the unit at the height of normal listening or at least above the knee.

1

Install the attached screw to the back of this unit.2

Fix the attached bracket on the wall. Drill screw hole and plug the rubber into the hole.

3

Fix the bracket on the wall with screw until it is secure.4

Put the slim home theater sound bar on to the installed bracket steadily. Slide the knob in the key hole and fix it to the right place.

5

This electronic unit contains a lot of recyclable material. Please send it to a local recycling center when disposing of an old unit. Please follow the local related regulations on the proper steps to dispose packing material, batteries and old equipment.

Ensure that air can circulate freely through the ventilation holes on sound bar. Allow at least 5cm ~ 10cm clearance around the unit.Never expose sound bar to direct sunlight, naked flames or heat.Do not attempt to disassemble the sound bar.Keep sound bar away from any liquid, and moisture.

•

•••

WARNING

To avoid risk of fire or electric shock

Notice for Recycling

Audio cable is not properly connected or it is not on the appropriate channel.

Please connect the audio cable, andselect the appropriate channel withremote control.

The switch on the bottom of unit is not in “ON” status.

Ensure the adapter is properly connected. Press the power button on the remote control or the “ON / OFF” button to boot on.

The remote control is not facing the receiving window or it is far away from the unit. The batteries in the remote control may have been exhausted.

Turn remote control towards receiving window (valid distance is approximately 25 feet). Please replac old batteries with the same specification as previous.

Reason Solution

Troubleshooting

For additional support please contact: info@bohmaudio.com

No Sound

Doesn’t Work

Remote Control Is Not Sensitive

Trouble