blue ridge dark · shades of blue and grey granite are highlighted by occasional white quartz...
TRANSCRIPT
Shades of blue and grey granite are highlighted by occasional white
quartz veins. Perfect for either modern or traditional applications,
Blue Ridge Dark™ is a textured granite that showcases both weathered
and split faces.
BLU E R I D G E DA R K ™
1
1. BLUE RIDGE DARK™ MOSAIC THINSTONE™ 2. BLUE RIDGE DARK™ SQUARE CUT THINSTONE™ 3. OCEAN BLUE TRAVERTINE VEIN CUT
2
3
*Please Note:Our natural stone products vary in color over time. All stone product photos shown may not be representative of our current stone lots. Request a sample for the current color range available.
www.connecticutstone.com
Milford - 203-882-1000
Stamford - 203-967-2937
Blue Ridge Dark™
Classification: Natural Stone Granite
Quarry Location: USA
Fabrication: Guillotine cut rough edge-standard production face
Installation Instructions: Standard masonry veneer procedure
Gross material coverage is exclusive of any waste and assumes a standard ¾" joint width. Expect a minimum 10% – 15% waste factor. If standard joint width is less than ¾", then expect a 20% – 25% waste factor.
ThinStone™ is a special cut of our traditional veneer specifically engineered for interior and exterior applications over brick, concrete or plywood. On average, ThinStone™ is up to 5 times thinner than traditional veneer. Less weight results in lower shipping costs, easier installation and minimal to no footing requirements.
ASTM DATA: Average results for ASTM tests C-170
Density (lbs. / CF)
Water AbsorptionCompressive
Strength Perpendicular
Compressive Strength Parallel
Modulus of Rupture
Bulk Specific Gravity
159.74 0.70% 12,920 PSI 6,920 PSI 2,340 —
Pattern Bed Depth Coverage (Average) Facing Area Sold by
Coping ± 3" to ± 5" ±25 LF per TN 12" x 14" to 18" x 20" TN
Ledge Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 1.5" x 8" to 3" x 20" TN
Mosaic Veneer ± 3.5" to ± 5" ±30 SF per TN 10" x 10" to 18" x 24" TN
Sawn Bed Veneer ± 3" to ± 5" ±30 SF per TN 2" x 8" to 12" x 24" TN
Square Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 6" x 8" to 16" x 18" TN
Strip Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 3" x 8" to 5" x 24" TN
Semi-Square Flagging ± 1.5" to ± 3" ±55 SF per TN 10" x 10" to 18" x 18" TN
Stepping Stones ± 4" to ± 18" — 24" x 24" to 36" x 48" TN
Wallstone ± 2" to ± 14" ±15 CF per TN 6" x 6" to 18" x 18" TN
Pattern Bed Depth Facing Area Sold by Pallet Size
Ledge Cut Veneer .75" to 1.25" 1" x 3" to 4" x 13" SF 100 or 240 SF
Mosaic Veneer .75" to 1.25" 6" x 6" to 12" x 18" SF 100 or 240 SF
Square Cut Veneer .75" to 1.25" 4" x 4" to 12" x 18" SF 100 or 240 SF
Strip Cut Veneer .75" to 1.25" 3" x 6" to 6" x 16" SF 100 or 240 SF
Corners .75" to 1.25" 3" to 12" Returns LF 50 or 100 LF