blackrock splitter box to egi cable...splitter box to egi cable user’s manual lb-0816 draft 1.00...

Splitter Box to EGI Cable

User’s Manual Electrophysiology, Simplified.

LB-0816 Draft 1.00 ©2016 Blackrock Microsystems®, LLC

Blackrock


PN-9666

CAUTION--Investigational device. Limited by

Federal (or United States) law to

investigational use.

Blackrock Microsystems, LLC

630 Komas Drive • Suite 200

Salt Lake City • UT 84108

T: +1 (801) 582-5533

www.blackrockmicro.com

[email protected]

2

Electrophysiology, Simplified.


User’s Manual


1 Introduction Splitter Box to EGI Cable provides an interface between Blackrock Splitter Boxes and EGI Cable.

2 Warnings

• Do not connect QSE connector of Bank B and QSE connector of Bank C to the same Splitter Box.

• Incorrect battery replacement could damage your devices.

• Always replace old battery with new battery after 10 hours of use.

• Always follow the instructions and cautions on your battery.

• Only use AA 1.5V battery.

IEC60101-0102 Danger of Electrostatic Discharge (ESD)

• In order to reduce the likelihood of ESD, use antistatic or electrostatic discharge (ESD) safe gloves when connecting the Cable.

3 Battery replacement instructions

• DO NOT connect the Splitter Box to EGI Cable to any devices during battery replacement process

• Remove the screw and the top cover of the battery holder.

• Replace 8 AA 1.5V batteries.

• Insert the batteries to the polarity labeled on the battery holder.

• Double check the battery polarity.

• Place the top cover and the screw back on the battery holder.

Battery Holder

3



User’s Manual


4 Hardware

• QSE connector of Bank B powers Splitter Box #1

• QSE connector of Bank C powers Splitter Box #2

• DO NOT connect QSE connector of Bank B and QSE connector of Bank C to the same Splitter Box.

Female DB37 Connectors AA Battery Holder QSE Connectors

*Splitter Box and Battery are not included

Removable Flex wrap

4



User’s Manual


Female DB37 Connectors (front view)

01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39

02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

QSE Connectors (front view)

5



User’s Manual


Customer's Cable Pinout

Channel-01 Pin #01 Pin #01 Pin #01
































R1 Pin #33 NC NC

R1 Pin #34 NC NC

Vdd (input) Pin #35 NC NC


GROUND Pin #37 NC NC


Vss (input) Pin #39 NC NC


Blackrock Cable PinoutBlackrock Splitter Box

Bank A Channel 01-32QSE Bank A

Female DB37

Bank A

Male DB37

Channel 01-32

6



User’s Manual



































R2 Pin #33 Pin #17 Pin #17

R2 Pin #34 NC NC

Vdd (input) Pin #35 (+6.5 V ouput) NC NC


GROUND Pin #37 (GROUND) Pin #19 Pin #19

GROUND Pin #38 (GROUND) NC NC

Vss (input) Pin #39 (-6.5 V ouput) NC NC


Blackrock Splitter Box

Bank B Channel 33-64

Blackrock Cable Pinout

QSE Bank BFemale DB37

Bank B

Male DB37

Channel 33-64, Ground, and Reference

R1 = Reference #1

NC = Not Connected

R2 = Reference #2

NC = Not Connected

7



User’s Manual



































R3 Pin #33 NC NC

R3 Pin #34 NC NC

Vdd (input) Pin #35 (+6.5 V ouput) NC NC




Vss (input) Pin #39 (-6.5 V ouput) NC NC


Male DB37

Channel 65-96


Bank C Channel 65-96


QSE Bank CFemale DB37

Bank C

R3 = Reference #3

NC = Not Connected

8



User’s Manual



































R4 Pin #33 NC NC

R4 Pin #34 NC NC








Bank D Channel 97-128


QSE Bank DFemale DB37

Bank D

Male DB37

Channel 97-128

R4 = Reference #4

NC = Not Connected

9



User’s Manual


5 Warranty Blackrock Microsystems, LLC warrants that its products are free from defects in materials and manufacturing for a period of one year from the date of shipment. Blackrock will, at its option, repair or replace any product that does not comply with this warranty. This warranty is voided by:

1. Any modification or attempted modification to the product done by anyone other than an authorized Blackrock employee

2. Any abuse, negligent handling or misapplication of the product.

This constitutes the sole warranty made by Blackrock, There are no other warranties, expressed or implied, which extend beyond those described herein or to anyone other than the original purchaser, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall Blackrock Microsystems, be liable for any incidental or consequential damages, or for the infringement of any patent rights or third party rights due to the use of its products.

5.1 Return Merchandise Authorization (RMA)

In the unlikely event that your cable needs to be returned to Blackrock for repair or maintenance, do not send any equipment back without a Return Merchandise Authorization Number. An RMA number will be issued to you by a Blackrock representative. If you need to obtain an RMA number, you may contact a product support representative at (801) 582-5533 or toll free at (866) 806-3692.

Once an RMA number has been issued, it is important to safely pack the returned item for shipping back to Blackrock. It is preferred that you save the original boxes and packing materials that your system arrived in for return shipment. Please address the package as follows:

Blackrock Microsystems, LLC ATTN: RMA# 630 Komas Drive, Suite 200 Salt Lake City, UT 84108 USA Tel: +1 (801) 582-5533

blackrock splitter box to egi cable...splitter box to egi cable user’s manual lb-0816 draft 1.00...

Documents