Name of Work :- Construction of ALPA - SHAKSHARTA KANYA NIVASHI SCHOOL, HOSTEL AND TEACHERS QTRS, MULTI PURPOSE HALL, CHOKODAR/PEON QTRS. At Ambaji, Dist. Banaskantha.

Schedule “B”

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

1 4463.00 Cu.M.

Excavation for foundation up to 1.5 M. depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 Meter. lead in (C) Hard murrum

Cu.M.

2 1002.00 Cu.M.

Excavation for foundation depth from 1.5 M to 3.0 incl. sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 m. lead in (c) Hard murrum

Cu.M.

3 103.00 Cu.M.

Excavation for foundation depth from 3 M to 5.0 incl. sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 m. lead in (c) Hard murrum

Cu.M.

4 52.00 Cu.M.

Excavation for foundation depth from 5 M to 6.0 incl. sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 m. lead in (C) Hard murrum

Cu.M.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

5 1324.70 Cu.M.

Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand broken stone aggregates 40 mm. nominal size) and curing complete including cost of from work in : (a) Foundation and plinth

Cu.M.

6 3319.90 Cu.M.

Brick work using common burnt clay building brick having crushing strength not less than 35 kg /sq Cm in cement mortar 1:6 ( 1 -cement ,6 -fine sand) in Foundation and Plinth ( B ) conventional

Cu.M.

7 2302.00 Cu.M.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. In depth consolidating each deposited layer by ramming and watering.

Cu.M.

8 2093.00 Cu.M.

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. Thickness including watering ramming and consolidating etc. complete.

Cu.M.

9 1257.00 Cu.M.

Filling in plinth with Sand under floor in layers not exceeding 20 cm incl. consolidating each deposited layer by ramming and watering etc. Complete

Cu.M.

10 3096.00 Sq.Mt.

Carrying out plinth treatment to New construction / existing structure by spraying chemical solution for termite control treatment including labour and material

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

consistent with I.S.I. Specification.

11 5.00 Cu.M.

Providing and laying controlled cement concrete M-200 and curing complete including the cost form work and reinforcement for reinforced concrete work in. (A) Foundations, Footings, Base of columns and the like and Mass concrete.

Cu.M.

12 140.10 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) Plinth Beam / Coping

Cu.M.

13 4.40 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) Columns Ground Floor

Cu.M.

14 1079.80 Cu.M.

Brick work using common burnt clay building brick having crushing strength not less than 35 kg /sq Cm in cement mortar 1:6 ( 1- cement, 6 - fine sand) in super structure ( B ) conventional for Ground floor.

Cu.M.

15 607.00 Cu.M.

Brick work using common burnt clay building brick having crushing strength not less than 35 kg /sq Cm in cement mortar 1:6 ( 1- cement, 6 - fine sand) in super structure ( A ) Modular for Ground floor

Cu.M.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

16 28.00 Cu.M.

Brick work using common burnt clay building brick having crushing strength not less than 35 kg /sq Cm in cement mortar 1:6 ( 1 -cement ,6 -fine sand)in foundation and plinth ( B ) conventional for First floor.

Cu.M.

17 78.60 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) Sill Band.

Cu.M.

18 4.00 Cu.M.

Providing and laying controlled cement concrete M-200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in. (E) Beams upto floor two level.

Cu.M.

19 78.90 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (F) Lintels.

Cu.M.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

20 67.50 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (iii) Slab For Ground floor.

Cu.M.

21 86.00 Cu.M.

Providing and laying controlled cement concrete M -200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (C) Wall Caps on top of walls .

Cu.M.

22 12.00 Cu.M.

Providing and casting in situ ordinary cement concrete M.150 for kerb/kerb block including formwork curing and finishing complete.

Cu.M.

23 38655.00 Kg.

Providing TMT Bars (thermo Mechanically Treated Bars) reinforcement confirmed to IS-1786 FE 415 of approved brand like Sail, Tisco, THermex or equivalent for R.C.C. work including bending, binding and placing in position complete for All Floor

Kg.

24 402.00 Sq.Mt.

Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 kg/Sq.cm in cement mortar 1:3 (1-Cement : 3-coarse sand )with 2 Nos. of 6 mm Mild steel rounded bars after every three course embedded in cement mortar

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

in super structure (B) Conventional for Ground floor

25 8870.40 Sq.Mt.

Providing 15 mm thick cement plaster in two coat on brick / concrete wall for interior plastering finished even and smooth ( ii ) Cement mortar 1:3 ( 1 - cement, 3 - sand ) and finishing Malaplaster Ground Floor

Sq.Mt.

26 496.00 Sq.Mt.

Providing 10 mm thick cement plaster in single coat on brick / concrete wall for interior plastering finished even and smooth ( ii ) Cement mortar 1:3 ( 1 - cement, 3 - sand ) and finishing smooth with floating coat of neat cement slurry Ground Floor.

Sq.Mt.

27 120.00 Sq.Mt.

Providing 10 mm thick cement plaster in single coat on brick / concrete wall for interior plastering finished even and smooth ( ii ) Cement mortar 1:3 ( 1 - cement, 3 - sand ) and finishing smooth Ground Floor

Sq.Mt.

28 243.00 Sq.Mt.

Providing 15 mm thick cement plaster in two coat on brick / concrete wall for interior plastering finished even and smooth ( ii )Cement mortar 1:3 ( 1-cement , 3 - sand ) and finishing Malaplaster for First Floor.

Sq.Mt.

29 2868.00 Sq.Mt.

Pointing on brick work with cement mortar 1:4 (1 cement : 4 coarse sand) (A) Flush pointing

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

30 2593.00 Sq.Mt.

Providing 20 mm thick sand face cement plaster on walls upto height 10 metres above ground level consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 Cement : 3 Sand ) and 8 mm thick finishing coat of C. M. 1:1 ( 1 – cement :1 - sand ) etc complete.

Sq.Mt.

31 330.00 Kg.

Providing and fixing mild steel door with 40 x 40 x 6 mm angle for frame and for shutter frame 30 x 30 x 3 angle. For windows frame of angle 35 x 35 x 5 & for shutter windows 25 x 25 x 3 mm size angle and 18 gauge sheet for panels & 10 mm dia bars at 10 cm c/c for grill and 40 x 6 mm flats on edge of shutter, & 20 x 6 mm binding patti, including one coat of primer and two coats of oil painting etc. comp. as per detail / as directed by Engineer in Charge

Kg.

32 157.00 Sq.Mt.

Providing & fixing 35 mm. Thick prelaminated flush door with frame made from ISLC 100 & 25 x 6 mm flat. The flush door solid core construction with frame of first class hard-wood with cross band and face veneer of plywood face panels and decorative batten, border patti of Teakwood. including welding hinges with frame and providing aluminum anodized fixtures and fastening, etc complete as directed.

Sq.Mt.

33 156.00 Sq.Mt.

Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP shutter with depressed panel

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

SHUTTER having extra reinforcement on sides and edges and in GEL coat finish. The core of shutter is to be filled up with injected fiber extinguishing grade polyurethane foam done in situ along with embedded wooden pieces for stiffening and also for taking hinges and fixtures. The whole FRP frame and shutter is to be water proof, weatherproof, termite proof and resistance to mild acid / Alkali resistance including S.S. hinges with necessary screws and aluminum fixtures and fastening.

34 264.00 Sq.Mt.

Providing & fixing 35 mm. Thick shutters for doors windows and clearstory windows including Indian teak wood frames 10 cm. x 7 cm. and 12mm dia bright bars @ 10 cm C/C and 25 x 6 mm flats, including anodized aluminum fixtures & fastenings and including primer coat of approved quality and two coats of oil paint etc. complete. (1) Fully glazed

Sq.Mt.

35 91.00 Sq.Mt.

Providing & fixing ventilators with teak wood frame 10 cm. X 7 cm. Size and S.S. mosquito net and 12mm dia bright bars @ 10 cm C/C and 25 x 6 mm flats, fixing with 60 x 20 mm wooden beading to teakwood including the cost of oil painting to wood work etc. complete.

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

36 7876.00 Sq.Mt.

Distempering (three coats) with oil bound distemper of approved brand & manufacturer & of required shade on wall surfaces to give an even shade, over & including a primary coat with alkali resistance primer of approved brand after thoroughly brushing the surface free from mortar dropping & other foreign matter & also including preparing the surface even & smooth.

Sq.Mt.

37 5341.00 Sq.Mt.

Wall painting with weather proof acrylic emulsion APEX type paint of approved brand & manufacture and of required shade on exterior wall surface to give an even shade over and including a primary coat with alkali resistance primer of approved brand after thoroughly brushing surface to remove all dirt and remains of loose powdered materials etc comp. for all height.

Sq.Mt.

38 4496.00 Sq.Mt.

Providing and laying hand dressed polished blue Kota stone slab flooring over 20 mm. (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand ) or L.M. 1:1.5 and laid over and jointed with grey cement slurry including rubbing and semi mirror polishing with emery stone No. 600 complete. (A) 25 mm. Thick

Sq.Mt.

39 344.00 Sq.Mt.

Providing and laying hand dressed polished blue Kota stone slab 25 mm. thick in risers of steps. Dado and

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

pillars laid on 10 mm. thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and semi mirror polishing with emery stone No. 600 complete. (A) 25 mm. Thick

40 394.00 Sq.Mt.

Providing and laying ceramic tiles 30 cm x 30 cm, 6 mm. thick of Somani, Kajaria, Bell or equivalent brand in flooring treads of steps and landings laid on a bed of 12 mm. thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed with white cement slurry.

Sq.Mt.

41 1282.00 Sq.Mt.

Providing and laying ceramic tiles 30 cm x 30 cm, 6 mm. thick of Somani, Kajaria, Bell or equivalent brand in in skirting risers of steps and dado on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed with white cement slurry.

Sq.Mt.

42 922.00 Quintal

Steel work welded in built-up section, frame including cutting hoisting fixing in position and applying a priming coat of red lead paint : (A) In beams and joists channels, angle, tees, flats, square or round pipes connecting cleats as in main and cross beams hip and jacks rafters purlins connected to common rafter as per detailed drawing including two coats of oil paint. {All sections shall be of TATA or equivalent brand and

Quintal

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

size shall be approved structure Design}

43 6470.00 Sq.Mt.

Providing & fixing Galvanized pre-coated meta colour roof sheet of SHREE pre-coated made or equivalent approved quality with necessary J-bolt washers & necessary slope as per detailed drawing.

Sq.Mt.

44 547.00 Rmt.

Providing ridges or hips 600 mm. Over all in plain pre coated meta colour sheet fixed with G.I. 'J' or 'L' hooks, bolts and nuts 8 mm. Dia. G.I.Limpet and bitumen washer complete. (1) 0.80 mm. Thick sheet

Rmt.

45 1001.00 Rmt.

Providing and fixing 150 mm. Wide 450 mm. Overall semicircular plain pre coated meta colour sheet class 3 gutter with iron brackets 40 mm x 3 mm. Size bolts nuts washers etc. including making necessary connections with rain water pipes-(I) 0.80 mm. Thick

Rmt.

46 1001.00 Rmt.

Providing and fixing M.S. Sheet architect strip 20cm deep & 6 mm thick including welding, grinding, painting etc. complete as directed by Engineer In Charge

Rmt.

47 5845.00 Kg.

Providing and fixing M.S. grills / Covers of required pattern to cement concrete walls prepared with M.S. flats, angles, Square / round bars, square pipes, at required spacings with necessary hold fasts and

Kg.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

hinges as per detailed drawing and fixing concrete walls etc. complete including painting two coat & applying primer coat. (A) Plain / Ornamental Grill

48 2748.00 Rmt.

Providing throating or plaster drip and moulding to R.C.C. Chhajja.

Rmt.

49 62.10 Sq.Mt.

Providing up to floor two level precast cement concrete jali or grill 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm normal size) reinforced with 1.6 mm. diameter mild steel wire including roughening, cleaning and fixing finishing in cement mortar 1:3 and curing complete.(e) 100 mm. thick

Sq.Mt.

50 165.00 Sq.Mt.

Providing & fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm. Braced with flat iron diagonals 20 x 5 mm. Size with top and bottom rails of T-Iron 40 x 40 x 6 mm. With 38 mm. Dia steel pulleys, complete with bolts, nuts, locking arrangements, stoppers, handles including applying a priming coat of Red lead paint

Sq.Mt.

51 233.00 Sq.Mt.

Providing Cup boards for storage of files made of 21 gauge M.S. Sheet shall be supported by M.S. Angle as shown including one coat of Primer and two coat of

Sq.Mt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

synthetic enamel paint to the M.S. plate etc comp as per drawing and specifications

52 214.00 Sq.Mt.

Providing and laying of 30 mm thick mirror double Polished Kota stone slab flooring for selves of cup boards including fixing with necessary grooves with all labour material etc complete

Sq.Mt.

53 132.00 Sq.Mt.

Constructing Sandwich Platform of 20 mm thick Polished Black Granite at top and 30 mm thick Kota stone slab flooring fitting at bottom with cementing Materials / adhesives including making necessary grooves in walls with Vertical Kotastone 30 mm x 2 No sandwich thick every 60 cm centre to centre including all labour material of approved quality incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry including rubbing and polishing etc. complete.

Sq.Mt.

54 180.00 Rmt.

Providing and tying G.I. Wire 4 mm dia wire in fixed angle post for drying cloths.

Rmt.

55 475.00 Rmt.

Providing and fixing concealed to wall, ceiling and floor 80 Schedule Syntex / Astral or equivalent brand of the following nominal bore tube fittings and clamps including making goods the wall ceiling and floor (A) 15 mm

Rmt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

56 600.00 Rmt.

Providing and fixing concealed to wall, ceiling and floor 80 Schedule Syntex / Astral or equivalent brand of the following nominal bore tube fittings and clamps including making goods the wall ceiling and floor (B) 25 mm

Rmt.

57 270.00 Rmt.

Providing and fixing to wall, ceiling and floor 80 Schedule Syntex / Astral or equivalent of the following nominal bore tube fittings and clamps including making goods the wall ceiling and floor (C) 40 mm

Rmt.

58 80.00 Rmt.

Providing and fixing to wall, ceiling and floor 80 Schedule Syntex / Astral or equivalent of the following nominal bore tube fittings and clamps including making goods the wall ceiling and floor (D) 50 mm

Rmt.

59 21.00 Nos.

Providing and fixing Handle valve of approved brand (A) 15 mm Dia

Nos.

60 18.00 Nos.

Providing and fixing Handle valve of approved brand (B) 25 mm Dia

Nos.

61 16.00 Nos.

Providing and fixing Handle valve of approved brand (C) 40 mm Dia

Nos.

62 7.00 Nos.

Providing and fixing Butterfly valve of IS approved brand (D) 50 mm Dia

Nos.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

63 330.00 Rmt.

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene pipes for soil waste and ventilating pipes of the following outside dia. low density, complete with necessary fittings ,wall clamps etc including making good the wall ceiling and floor. {Finolex, Supreme, Prince or equivalent brand} (A) 110 mm

Rmt.

64 400.00 Rmt.

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene pipes for soil waste and ventilating pipes of the following outside dia. low density, complete with necessary fittings ,wall clamps etc including making good the wall ceiling and floor. {Finolex, Supreme, Prince or equivalent brand} (A) 150 mm

Rmt.

65 60.00 Nos.

Providing and fixing PVC Nahni trap of the following nominal diameter of self cleaning design with C.I / pvc screwed down or hinged grating and SS jali including cost of cutting and making goods the walls and floor 100 mm inlet and 50 mm outlet.

Nos.

66 99.00 Nos.

Providing and fixing Screw down Quarter turn bib taps of following size (A) Brass chromium plated screw down Bib tap (I) 15 mm dia {Plumber, Mark, Esco equivalent brand}

Nos.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

67 56.00 Nos.

Providing and fixing Push Type bib taps of following size (A) Brass chromium plated screw down Bib tap (I) 15 mm dia {Plumber, Mark, Esco equivalent brand}

Nos.

68 8.00 Nos.

Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with screw, shanks and back nuts (A) 15 mm dia {Jaquar< Plumber, Mark Long pipe}

Nos.

69 6.00 Nos.

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or M.S brackets painted white including cutting cutting holes and making goods the same including. C.P. brass waste and waste pipes and bottaltrap (A) Vitreous china. (II) Flat back washbasin 550 mm x 400 mm size (I) in colour {Hindustan, Cera, Parryware or equivalent }

Nos.

70 43.00 Nos.

Provision and fixing water closet squatting Orissa type W.C. pan size 580mm integral footrest and 100 mm P or S trap and connection etc. comp. (A) Vitreous china long pattern white or color {Hindustan, Cera, Parryware or equivalent }

Nos.

71 20000.00 Liter

Providing and fixing P.V.C. water tank Syntex or equivalent with necessary G.I. Fitting over flow pipe, boll valve, clamp, nipple etc. including placing on

Liter

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

terrace as directed.

72 46.00 Nos.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C sheet or plywood sheet or PVC framing and fixed to wooden plugs with C.P brass screw and washers.

Nos.

73 11.00 Nos.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with cobras screws ( B ) 600 mm X 20mm size

Nos.

74 40.00 Nos.

Providing and fixing Alluminum wall page with set of five pag and fixing on 12 mm thick plywood with painting and and fixing with screws.

Nos.

75 17.00 Nos.

Providing and fixing urinal of approved quality including connection with trap and with integral longitudinal flush pipe (A) Squatting plate pattern white earthen ware 550 mm. X 300 mm. {Cera, Hindustan, Khodiyar, Parrywar or equivalent brand}

Nos.

76 43.00 Nos.

Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and water tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard weight(I) Square mouth traps (C) 150 mm. X 100 mm size p or R type

Nos.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

77 24.00 Nos.

Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls & bed concrete etc. complete.(I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line.

Nos.

78 70.00 Rmt.

Drilling 250/300 mm dia pilot bore at above village site in all strata by mud flush direct rotary rig / reverse rotary rig

Rmt.

79 70.00 Rmt.

Remaining 250 / 300 mm dia bore hole to following bore hole including assembling jointing, lowering of housing casing strainer pipes and other assembly items with gravel packing and clay ball packing etc. complete.

Rmt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

80 50.00 Rmt.

Drilling 300 mm dia bore hole in overburden strata by D.T.H. rig upto required depth including lowering & fixing of 250 mm dia ERW / PVC pipes and further drilling of 200mm dia bore hole in soft / hard rock by D.T.H. drilling method upto total depth of 0 to 350 mtrs. or as per actual requirement

Rmt.

81 6.00 Cu.M.

Supply of clay balls having size of 15mm to 25 mm made from sticky clay on site

Cu.M.

82 70.00 Rmt.

Supply of ERW blank pipe of approved quality at site of work confirming to IS 1239-1964 200mm internal dia for housing 5 mm thick

Rmt.

83 50.00 Rmt.

Supply of 200mm dia slotted pipe for strainer size 2 1/2 " x 21/2" x 1/8" 5 mm thick

Rmt.

84 109.00 Rmt.

Jointing ERW pipes blank or slotted by solding including cost of jointing with materials and champlas sets.

Rmt.

85 20.00 Cu.M.

Supply of gravel having size 4mm to 6 mm as directed on site

Cu.M.

86 1.00 LS

Providing and fixing E.R.W. bail plug reducer steel bent plates, welding rod, supporting clamps etc as per requirement 0.60 mt. long and 200mm dia.

LS

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

87 2.00 No.

Supplying submersible pump set for bore of 150 mm. dia. or, more having 3 phase motor capacity not more than 15 H.P. and discharge capacity having (d) ( 8 stage) 800 L.P.M. at the head 60 mtrs suitable for 80 mm dia. delivery pipe Cat II

No.

88 1.00 No.

Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made from 16 G. CIRCA sheet duly painted with epoxy power painted inside and outside with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete unit), Toggle switch to by pass Single phase preventer cum WIG, indicating lamps for R- Y- B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each with two way selector switch incoming wires duly socket Crimped, Panel to be erected on angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay, thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler Hammer make only. Panel to be erected on angle iron frame ground on wall. (d) S/D up to 15 HP (L & T, Lubi, BCH make only)

No.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

89 1.00 No.

Lowering of submersible motor pump set complete with required. Nos. and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with water. (c)Above 90 mtr. and Upto 120 mtrs.

No.

90 250.00 Rmt.

Providing and erecting ISI marked PVC insulated PVC Shethed Flat flexible Submersible copper cable approved make of following Size.(d) 3 Core x 4 Sq. mm.

Rmt.

91 3.00 No.

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating material, water proofing material, & making the joint complete. (A) Upto 10Sq. Mm.

No.

92 105.00 Rmt.

Supplying ISI Marked (Embossed) following size of Heavy duty "C" Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (D) 80 mm dia. (Jindal, Asian, Tata make or equivalent make only)

Rmt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

93 35.00 No.

Supplying and erecting with leak proof materials, M.S. Heavy duty ISI marked coupling having threads of 8 TPI/11 TPI suitable for 'C' class pipe to take load of pump and pipe assembly of following size andTPI (G) 80mm (3")dia pipe 8 TPI

No.

94 35.00 No.

Add cost of leak proof complete welding surrounding pipe and coupling for use as column pipe for following size (A) 80mm,

No.

95 35.00 No.

Cutting the heavy duty pipe and threading one end of pipe with 8 TPI / 11 TPI as per requirement and including to and fro charges.(B) 80mm (3") dia pipe.(D) 80mm (3") dia pipe

No.

96 1.00 No.

Heavy duty clamp made from 4" x 1.5" iron strip suitable for column pipe 1.5" to 2" length. (D) 80mm (3") dia pipe

No.

97 1.00 No.

Supplying & erecting G.l. bend for pipe connections suitable for .(F) 80 mm(3")

No.

98 1.00 No.

Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked suitable for following size (C) 80 mm dia.

No.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

99 1.00 L.S.

Charges for development of bore by giving air with compressor for requirement as per site situation {600 CFM / 150 PSI upto the any depth, minimum 6 hours

L.S.

100 440.00 RMT

Providing and laying in ground 100mm dia P.V.C. rain water pipe with necessary fittings, connection as per detailed drawing as directed by Engineer in charge

RMT

101 200.00 RMT

Providing and laying in ground 150mm dia P.V.C. rain water pipe with necessary fittings, connection as per detailed drawing as directed by Engineer in charge

RMT

102 56.00 No

Providing and Construction of Junction chambers of size 0.35 x 0.35 x 0.60 mt. including connecting of rainwater pipe as per detailed drawing and as directed by Engineer in charge

No

103 2.00 No

Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. as directed including connection rainwater pipes as per detailed as directed by Engineer in charge including cost of labour and material.

No

104 2.00 No

Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for water logging with excavation in any strata upto four meter depth, filling the pit with brick bats in 0.60 mt. depth with 25-40mm kapachi, 0.30 mt. depth and 2.0 mt. depth with coarse sand in layers

No

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

including making P.V.C. line for water inlet etc. as directed with 250mm dia bore 35 mt. depth and 150mm dia P.V.C. pipe of 10 Kg. f/Cm2 casing with gravel packing or as directed.

105 80.00 Sq.Mt.

Painting lines, dashes, arrows, letters, etc. on roads, air fields and like in two coats with road marking paint Brushing including cleaning the surface of all dirt, dust and other foreign matter.(I) Over 10 c.m. in width

Sq.Mt.

106 625.00 Sq.Mt.

Lawn Grass:- Filling the area upto the depth of 23 cm. with good quality of field fertile soil, breaking the clods leveling the area, free from stone, grass roots etc. and farm yard manure at the rate of 5 cu.mt. per 100 sq. mt. mixing the same with layer of soil, leveling rolling, pre-planting, watering etc and planting the lawn grass of approved variety at 10 x 10 cm. distance etc complete as per detail specification and maintenance for 3 months

Sq.Mt.

107 50.00 No.

Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia square mesh of 2” x 2” and M.S. Flat of 25mm x 5 mm vertical support and three rings of 20 x 3 mm flat, fixing on site in CC 1:4:8, and including oil painting two coats with red lead priming coat and planting of tree and growing them as directed.

No.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

108 157.00 Cu.M.

Supplying and stacking of graded stone aggregate of following size (for W. B. M. ) (1 ) Machine crushed stone aggregate 45 mm to 63 mm size

Cu.M.

109 39.30 Cu.M.

Supplying and stacking of Soft murrum / Binding materials with av. Lead of 5.00 KM.

Cu.M.

110 157.00 Cu.M.

Spreading the stone aggregate for road and W . B . M . including filling the interstices to required camber and gradient (excluding spreading of Blinding ) (I) 45 to 63 mm size metals

Cu.M.

111 40.00 Cu.M.

Spreading of Soft murrum / Binding materials filling the gaps in metal and leveling to chamber and gradient as directed (I) Murrum

Cu.M.

112 1125.00 Sq.Mt.

Rolling and consolidating water bound macadam including watering not exceeding 150 mm thickness (Main layer including filing in depressions which occur during the process.(B) with power roller exceeding 8 tone not exceeding 12 tone

Sq.Mt.

113 135.00 Cu.M.

Providing and casting in situ ordinary cement concrete M.200 for wearing coat laid as directed including tamping vibrating finishing curing and filling in joints with bitumen complete.

Cu.M.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

114 8.00 Ha

Clearing grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, sapling, and trees of girth upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material as per clause 201 (II) By Mechanical means

Ha

115 2880.00 Cu.M.

Earth work in cutting In all sorts of soil and soft murrum Including conveying and spreading the stuff, embankment as and where directed within 200 m. from the end of the cutting with all required lead and lift.

Cu.M.

116 4320.00 Cu.M.

Earth work in cutting In all sorts of soil and soft murrum Including conveying and spreading the stuff, embankment as and where directed within 200 m. from the end of the cutting with all required lead and lift. (ii) Soft rock not required blasting

Cu.M.

117 6800.00 Cu.M.

Earth work for embankment including breaking clods, dressing, with all, lead and lift (excluding watering and consolidation) (c) From borrow area within all lead and lift.

Cu.M.

118 536.00 Pt.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked

Pt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

FR PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. (B) Single mounting base-frame & extured/ Metallic front plates. Cat II

119 334.00 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked FR PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch and hum free EME 5/6 step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling (B)Single mounting, base-frame & Textured / Metallic front plates. Cat II

Pt.

120 35.00 Pt.

Point wiring for Individual Plug with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked FR PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch & 6A 5pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling with following type of

Pt.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

accessories. (B)Single mounting, base-frame & Textured / Metallic front plates. Cat II

121 178.00 Pt.

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling with following type accessories (B)Single mounting, base-frame & Textured / Metallic front plates. Cat II

Pt.

122A 34.00 Ea.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection.(B)Single mounting, base-frame & Textured / Metallic front plates. Cat II (4) Two Pin/ RJ-11 Telephone Socket with Top

Ea.

122B 67.00 Ea.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection.(B)Single mounting, base-frame & Textured / Metallic front plates. Cat II (10) 16 Amp. SP one way switch

Ea.

122C 67.00 Ea.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

necessary connection.(B)Single mounting, base-frame & Textured / Metallic front plates. Cat II (11) 6/16Amp. Universal socket

122D 9.00 Ea.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection.(B)Single mounting, base-frame & Textured / Metallic front plates. Cat II (16) 32 Amps. DP switch with Indicator

Ea.

123A 3615.00 Mtr.

Providing and erecting 1.5 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps for erecting concealed in wall/slab along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. (a) 20 mm

Mtr.

123B 850.00 Mtr.

Providing and erecting 1.5 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps for erecting concealed in wall/slab along with continuous fish wire to draw mains, laid in approved

Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. (b) 25 mm

124A 25.00 Mtr.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 20 mm

Mtr.

124B 10.00 Mtr.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.(3) 25 mm

Mtr.

125A 2290.00 Mtr.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in existing pipe erected with 1.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size (b) 2 wire 1.5 sq. mm

Mtr.

125B 1361.00 Mtr.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in existing pipe erected with 1.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size (c) 2 wire 2.5 sq. mm

Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

126A 280.00 Mtr.

Mains with 1.1 KV grade FR PVC insulated ISI marked stranded Copper conductor wire in existing pipe erected with 2.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size (a).2 wire 4 sq. mm

Mtr.

126B 670.00 Mtr.

Mains with 1.1 KV grade FR PVC insulated ISI marked stranded Copper conductor wire in existing pipe erected with 2.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size (b). 2 wire 6 sq. mm

Mtr.

127 50.00 Mtr.

Mains with ISI marked, 1.5KV grade electrolyte stranded, annealed copper conductor with 1050C heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (h) One wire 25.00 sq. mm

Mtr.

128 1800.00 Mtr.

Supplying & erecting Delton or approved make Telephone Cable electrolytic grade annealed copper conductor insulated with PE insulation twisted in to pairs with colour combination bunched together in

Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

concentric layers so as to minimizes cross-talk & wrapped with FR PVC tape & sheathed with FR PVC or HFFR outer Jacket suitable for indoor telephone wiring & confirming to C-DOT S/WS - 113 / IEC 60189-2, UL-1581 SECTION 1080 VW-1 erected in existing pipe. of following size of conductors & nos. of pairs. With necessary connections. (C) Conductor Size 0.6 mm (a) Unarmoured (18) Two Pairs

129 264.00 Ea.

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick laminated sheet in wooden / PVC/ Metal Box. erected on wall/ ceiling. (8) Bakelite lamp holder

Ea.

130 245.00 Ea.

Bakelite adopter for Holder to be erected. Ea.

131 7.00 Ea

Call bell/buzzer, 250 volts, complete erected on existing polished wooden block or 3 mm. thick laminated sheet.

Ea

132 7.00 Ea

Call bell gong type suitable for 230 volts, 50 Cys. AC supply comp. Erected on existing polished wooden block or 3mm. thick laminated sheet.

Ea

133 8.00 Ea

Decorative call bell Ting-tong box type 250 volts complete erected on existing polished wooden block or in M.S. box with 3mm. thick laminated sheet

Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

134 115.00 Ea

Approved make C.F.L. lamp Retrofit 9/11 Watt Cat II Ea

135 103.00 Ea

Providing and erecting wide spread mirror optic recessed mounting fl. fitting with HFHC Electronic Ballast with THD less than 10 complete with holder with lead wire and connection Cat II(c) Suitable for 2 x14W T5 tubes

Ea

136 245.00 Ea

Supplying and erecting approved make. tube fitting with One no T-5 tube 24/ 28 W with HFHC Electronic ballast with THD less than 10 & built in adoptors, PVC housing & mirror optic reflector, suitable to work on 120V - 300V, A.C. supply with connector Cat II

Ea

137 20.00 Ea

Providing & erecting approved make Outdoor Streetlight Fitting of side entry with T-5 type tube rod with mirror optic reflector, acrylic cover & HFHC Electronic ballast having 0.95 P.F. & THD less than 30 with accessories mounted in powder coated CRCA / Aluminum housing with lead wires & connections of following nos. of tubes with watt capacity. (F) 4 Nos. x 24 Watt T-5 Tubes Cat II

Ea

138 4.00 Ea

Providing & erecting approved make CFL out doors type Post top lantern fittings with gear box die cast from Al. alloy with VPIT Ballast, CFL lamp holder &

Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

Clear acrylic diffuser with one no. 11/13 W compact flourcent lamp. Cat II

139 32.00 Ea

Providing and erecting approved make decorative surface mounting Down Lighter fittings with anodized Aluminium reflector suitable for compact flourcent lamp with copper ballast holder and necessary lead wire. (d)With Two Lamp 15/18/25 W C.F.L. Cat II

Ea

140 9.00 Ea

Supplying KITKAT pattern porcelain cutout with base of following current capacity erected on existing block board. 200Amp 440Volts

Ea

141 7.00 Ea.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V. having Normal current rating up to 200A.with variables Thermal & magnetic release suitable to work on A.C. Supply 50 cys. with all internal connections & complete erected in 16 G.M.S. housing on angle frame. Cat III (ICS=100% of ICU)

Ea.

142 8.00 Ea.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415 V, having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 cys. with all internal connections & complete erected in 16 G.M.S. housing

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

on angle frame Cat III (ICS=100% of ICU)

143A 4.00 Ea.

Approved make Earth fault Relay suitable to mount with inter connection to moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S. Housing.. (1) 15 A -100 A , CT Ratio 1/100

Ea.

143B 3.00 Ea.

Approved make Earth fault Relay suitable to mount with inter connection to moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S. Housing.. (2) 125 A -200 A , CT Ratio 1/200

Ea.

144A 0.70 Rn. Mtr

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections with proper size of Copper. Wire or strip with lugs as directed (A) Suitable for 100 Amp. capacity having cross section area not less than 75 Sq.mm

Rn. Mtr

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

144B 3.50 Rn. Mtr

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections with proper size of Copper. Wire or strip with lugs as directed (B) Suitable for 200 Amp. capacity having cross section area not less than 125 Sq.mm

Rn. Mtr

145 8.00 Ea.

Supplying and erecting approved make Analog type moving iron C.T operated Ammeter A C Current suitable slide in scale 0- 400 Amp. with 3 Nos. of Current Transformer erected on panel board with connections.

Ea.

146 8.00 Ea.

Supplying and erecting approved make Analog type voltmeter moving iron with square/ Round Dial, flush/pedestal mounting pattern for A.C. Voltage 0 to 500 Volt range, erected on panel board with all connection, wiring etc.

Ea.

147 16.00 Ea.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with necessary connections.

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

148 8.00 Ea.

Supplying and erecting approved make set of indicator lamps J.S.T. type with neon lamp, lenses cover, Bakelite holder complete erected with necessary connections.

Ea.

149 3.00 Ea.

Providing & erecting 415VMCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat II

Ea.

150 73.00 Ea.

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6 to 32 Amp Capacity Cat II

Ea.

151 190.00 Ea.

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having overload and short circuit tripping elements and breaking capacity 10 KA to be erected in existing M.S. Box. confirming to IS 8828/1996 with ISI Mark Cat II

Ea.

152A 4.00 Ea

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

(D) Single phase 6way SS Double door

152B 18.00 Ea

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (F) Single phase 8 way SS Double door

Ea

152C 6.00 Ea

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (H) Single phase 12 way SS Double door

Ea

153A 6.90 Sq. Mtr.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated cubical panel board having IP 52 protection made from 2mm thick CRC M.S. sheet for outer body & doors, 1.5mm thick CRC M.S. Sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch

Sq. Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

gears, busbars, with suitable size of inter connecting PVC copper wire / copper-aluminum strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminimum strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (B) locally fabricated panel board (i) with 350 mm depth

153B 2.50 Sq. Mtr.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated cubical panel board having IP 52 protection made from 2mm thick CRC M.S. sheet for outer body & doors, 1.5mm thick CRC M.S. Sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, busbars, with suitable size of inter connecting PVC copper wire / copper-aluminum strips, rubber

Sq. Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminimum strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (B) locally fabricated panel board (ii) With 550 mm. Depth

154 7.00 Ea

Supplying & erecting funnel type earthing having earth plate of following size buried in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm. Dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double G.1 / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to ISS with following specification

Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

(D) with 60 x 60x 0.315 cms. Copper earth Plate

155 2.00 Ea

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection.

Ea

156 2.00 Ea.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for (L & T, BCH,T.C., Siemens, make). (a) for 32 A rating

Ea.

157 7.00 Ea

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S.

Ea

158 30.00 Kg.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per

Kg.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

159A 110.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI marked armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe at road crossing or floor of following size of cables (A) 3½ core 35 Sq. mm ( 16 Sq. mm ½ core)

Mtr.

159B 225.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI marked armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe at road crossing or floor of following size of cables (D) 3½ core 95 Sq. mm ( 50 Sq. mm ½ core)

Mtr.

159C 120.00 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI marked armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe at road crossing or floor of following size of cables (E) 3½ core 120 Sq. mm ( 70 Sq. mm ½ core)

Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

160 650.00 Mtr.

Providing and erecting XLPE (IS:7098)(I)-88 ISI marked armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe at road crossing or floor of following size of cables (b) 4 core 6 Sq. mm

Mtr.

161A 510.00 Mtr.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground. (A)Upto 25 Sq. mm. cable.

Mtr.

161B 285.00 Mtr.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground. (B)For 35 Sq. mm to 95 Sq. mm cable.

Mtr.

161C 95.00 Mtr.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground. (C)For 120 Sq. mm to 300 Sq. mm cable

Mtr.

162A 90.00 Mtr.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge.

Mtr.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

(A) 25 mm dia

162B 35.00 Mtr.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (B) 50 mm dia

Mtr.

162C 40.00 Mtr.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (C) 80 mm dia.

Mtr.

163 160.00 Mtr.

Providing & laying. R.C.C. hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material in an approved manner (C) 100 mm dia.

Mtr.

164 30.00 Mtr.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 2 to 4 core 6 Sq. mm

Mtr.

165A 8.00 Ea

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(D) 3½ core 95 Sq. mm

Ea

165B 4.00 Providing and, fixing heavy duty flange type brass Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

Ea cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(E) 3½ core 120 Sq. mm

166A 60.00 Ea

Solderiess crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 2.5/4/6 Sq.mm

Ea

166B 24.00 Ea

Solderiess crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 35 Sq.mm.

Ea

166C 36.00 Ea

Solderiess crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 95 Sq.mm.

Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

166D 12.00 Ea

Solderiess crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (H) 120 Sq.mm.

Ea

167 320.00 Ea

Approved make Power Saving 50 Watt Ceiling Fan with Condenser 230 volt A.C. 50 Cys. 1200 mm sweep complete having 3 blades with aluminium blades with , canopy & 30 cms. down rod erected with 24/ 0.2 flat 3 core flexible wire with earthing.(Havells, Orient, Crompton, Anchor, Bajaj,Usha)

Ea

168 384.00 Mtr.

Supplying and erectin 19/20mm. Nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible wire with ear thing

Mtr.

169 334.00 Ea

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box having depth of 75mm complete erected concealed in Ceiling with necessary finishing.

Ea

170 334.00 Providing 2.5 mm. thick laminated sheet to cover the Ea

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

Ea fan hook or Fan box.

171 18.00 Ea

Supplying and erecting approved make Industrial Exhaust fan suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free airflow condition, 305mm. dia., air displacement l900 cu.mtr/hour,900 RPM., 82Watt. consumption, single phase Cat II

Ea

172 18.00 Ea

Providing suitable M.S. louver shutter of the Exhaust fan.

Ea

173 18.00 Ea

Providing recess in wall or window frame suitable for erection of Exhaust fan complete with plastering and color washing to match the color of the wall or window complete with expanded metal in order to render the fitting in accessible and the room water-proof.

Ea

174 2.00 Ea

Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cys. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, 3 metres of 3 core round flexible Core and 3 pin plug top Cat II

Ea

175 15.00 Ea.

Galvanised iron pipe post “B” class 88.9 mm O.D 6 mtr. Long duly painted with two coats of alluminium paint complete with metallic base- plate of 300 mm x 300 mm x 4mm thick to be erected as a compound

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

light pole with approx. weight 47 Kg.

176 15.00 Ea.

Providing cement concrete foundation including excavation for the pole with 45 x 45 x 100 cms. Deep in 1:3:6 cement concrete (20 to 25 mm stone metal) with 45 cms x 45 cms (or 45 cms dia) x 45 cms high cement concrete plinth with necessary curing and finishing in approved manner.( for 4 & 6 mtr pole)

Ea.

177 10.00 Ea.

Providing Single arm bracket consisting of “B”Class G.I .pipe of 4.2 cms. outside dia. Complete with suitable G.I. sleeve tubing of required size and length suitable for 76.5mm/80mm/require size of pol top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with check nut complete painted with one coat. of Red oxide and two coats of Aluminluin paint.

Ea.

178 5.00 Ea.

Providing Double arm bracket consisting of" B" Class G.I .pipe of 4.2 cms. outside dia. Complete with suitable G.I. sleeve tubing of required size and length suitable for 76.5mm/80mm/require size of pol top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with check nut complete painted with one coat. of Red oxide and two coats of Aluminluin paint.

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

179 15.00 Ea.

Supplying & erecting Bharatia CH or approved make street light box comprising CNC Processed robust housing made from single sheet multi folded with high grade powder coating ( RAL-7032 Structure finish as Standard) of IP-55 degree of Protection Gasket(PU Gasketing) of following size of Box. (i) 200mm X 200 mm X 150 mm

Ea.

180 5.00 Ea.

Pipe type earthing having 150 cms. Long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire.

Ea.

181 5.00 Ea.

For using salt and charcoal/coke as required for pipe type earthing.

Ea.

182 45.00 Mtr.

“B” class Galvanised iron pipe 38/40 mm dia. meter having smooth finished bore of the pipe on both ends erected on the face of the wall with clamps, nuts and bolts for laying of cable along the pole / wall shaping the pipe as per site requirement to ease cable entry.

Mtr.

183 2.00 Ea.

Supplying & erecting Philips Ahuja make Amplifier having following specification:Power Output :250W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. Frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrys

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections.

184 20.00 Ea.

Supplying and erecting on necessary supports Philips / Ahuja make Weather & Dust resistant sound column with Aluminum case & Alluminium mesh grille with foam layer under grill, rotar- switch for selecting power taps / impedance having frequency response 150-20000 Hz with following specifications (b) With 2 speakers having power handling capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W.

Ea.

185A 8.00 Ea.

Supplying microphones stands with sturdy mechanism, treble free movement & positioning of microphones, free from rust with superior quality of chrome plating with following size.(b) Fixed height 35 cms & extendable upto 53 cms, with round base of dia. 16 cms.

Ea.

185B 8.00 Ea.

Supplying microphones stands with sturdy mechanism, treble free movement & positioning of microphones, free from rust with superior quality of chrome plating with following size.

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

(c)Fixed height 91 cms. & extendable upto 62 cms. with round base of dia. 23 cms.

186 6.00 Ea.

Supplying, Installing & testing Phlips/Ahuja make highly sensitive microphone capable to pick up weak sound from longer distance & wider area suitable for stage shows, group singing with frequency response 50 - 16000 Hz. Having sensitivity of 1.6MV / Pa & impedance 250 ohms (Lo -Z), Supplied with quick detachable holder & 10 mtr. twin core cable & 3 pin XLR connector.

Ea.

187 8.00 Ea.

Supplying, installing and testing Phlips/Ahuja make microphone for All purpose, with frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin core cable & 3 pin XLR connector.

Ea.

188 2.00 Ea.

Supplying & testing wireless microphone system Philips / Unisonix make for 92.5 MHz FM operation With effective range 200 feet with microphone having facility for frequency adjustment & receiver with LED indicator Telescopic antenna with battery cells.

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

189A 400.00 Mtr.

Supplying Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size (d).1.50 Sq.mm 2 core round PVC sheathed

Mtr.

189B 100.00 Mtr.

Supplying Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size (e).1.50 Sq.mm 3 core round PVC sheathed

Mtr.

190 4.00 Ea.

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 ltr. per hour @ an ambient temp of 350C. The outlet temp. of the water should drop by 150C within a hour, if the water is fed @ 320 C. The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostate, relay etc. complete with necessary inlet & outlet connection. {Bluestar/Voltas, & Usha}

Ea.

191 2.00 Ea.

Providing and erecting approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing. suitable

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control)) (B) for 2 ton capacity

192 22.00 Ea.

Providing and erecting TATA BP or equivalent make solar street light system with mountings structure and pole as per MNBS specification PV mould (s) rating 1X74WP comprises a compact fluorescent (CFL) type 4 pin ir 2 pin type with rating of 11Watts having 900 +/-5% lumans lead acid battery PV modules control electronic inter connection wires mounting hardware battery box. The system should be designed to automatically switch on at dark, operate throughout the night and automatically switch off at the under average daily isolation of 5KW/Sq.Mtr on a horizontal surface complete with installation

Ea.

193 67.00 Ea.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection on single board for the Computer operating System. Single mounting, base-frame & Textured / Metallic front plates. Cat II (2) Three No SP Switch and Three No 6A 5 Pin Plug(9) Modem Jack for Computer Open RJ-45(10) One No. 16 Amp. SP one way switch(11) One no. 6/16Amp. Universal socket

Ea.

Item No.

Quantity Estimated out more

or less

Item of Work

Tendered Rate

Unit

Total Amount According to

Estimated Quantity

In Figure Rs. Ps. In words

1 2 3 4 5 6 7

194 50.00 Rmt.

Providing & erecting 14 SWG galvanized mild steel chain with end rings for hanging tube fitting as directed.

Rmt.

TOTAL (A) Tendered Amount Rs. ________________________________

(B) Rebate on above tendered amount {if any} ______ % (in figure}

{ ______________________ in words Rs. ___________________________

(C) Net Tendered Amount {A- B} Rs. _____________________________

In words Rupees ________________________________________________________________________________

Executive Engineer R. & B. Division

Palanpur Signature of Contractor

Deputy Executive Engineer R. & B. Sub Division

Ambaji

Note :-

1 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC / 1090 / 25 S. Dated 18-11-1991 with detail specification and details of works and amount involved at site at the own cost as directed by Engineer in Charge

2 Testing of materials shall be as per statement attached with the specification. The materials shall be tested in GERI. Bill for testing charges shall be paid by the Executive Engineer and 1% {One %} computed after deducting the cost materials to be supplied by the Govt. at the estimate rate shall be recovered from the Contractor's running bills per G.R. {R. & B.} Deptt. No. TNC / 1085 / 4 / S. Dt. 20-12-91

3 In R.C.C. item where there is change of grade mix or change as per actual mix design the difference of cement consumption shall be added / deducted from rate of original item at the rate of star rate mentioned in tender.

4 All works shall be carried out as per Public Works department hand book specification and other specifications of Division or as directed.

5. All the columns in Schedule “B” should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

6. Rates quoted include clearance of site (prior to commencement of work and its close) in all respects and hold good for work under all conditions, site, moisture weather etc.

7. Contractor shall state even "nil" percentage if no deduction is offered. 8. For earthquake resistance provision the works shall be carried out as per the instruction of Engineer in Charge 9. The other conditions of Schedule "B" will remain unchanged. 10. srkir~)ni p(rp#i k|mi>k prc-1203 /3928/n. tir)K 02-01-2004 m&jb eÔrdir oiri kimg)r)mi> viprvimi> aiv[l) (sm[ºTn) Kil) Y[l)ai[

s>b>(Ft (vBign[ 25ni b>Dlmi> (f| ai[f ki[AT prt aipvin) rh[S[.

11. uwi[g an[ KiN (vBig, gi>F)ngrni qriv k|mi>k a[m.a[m.air. 112000/ 2013 / C ti. 1-09-2004 Y) sid) miT) {ai[D)nr) kl[ / aY< } an[ si[fT m&rm

prn) ri[yÃT) m&Iktni liB hv[ rd krvimi> aiv[l C[.

12 Labour cess - One percent of estimated cost put to tender for this work shall be recovered from the contract payment as "Labour Cess" in terms of The Gujarat Govt. Gazzete – extra ordinary – dated 12-12-04 implementation of Buildings and other construction works {Resolution of employment and condition of Services act 1996}

13. ki[ºT^kTr oiri p&ri[ piDvimi> aivti Dimrni Biv tfivt c&kvvi bibt[ srkir~)ni mig< an[ mkin (vBig gi>F)ngrni p(rp#i n>> a[s.T).air.

1020001-m>>34-29-h ti. 2-02-07 m&jb an&srvin&> rh[S[.

14. hi[T m)x ¼liºT an[ p[vrY) Yti Dimrni kimi[ bibt[ srkir~)ni mi. an[ m. (vBig gi>F)ngrni p(rp#i a[s.air.air. / 1586 / aie.b). /

179{6}-s ti. 20/1/07 m&jb an&srvin&> rh[S[.

15. g&jrit srkir~)ni mi. an[ m. (vBigni p(rp#i k|mi.k : airJa[n / 602006/{35} - s Y) diKl Yy[l Srti[.

1. 50 m)m)Y) vF& Dimrkimn) s>y&k_i ÔDie {b).a[s.J, b).b).a[m. (sviy} hi[y t[vi rAtini kimmi> dr 250 m)Tr d)q a[k k|i[s s[kSn pr

Dimrkimn) phi[Lie an&sir b[ Y) cir ki[r s[Àpl eÔrdir[ pi[tini ki[r kT)>g mS)n vD[ s>b>(Ft niyb kiy<pilk ejn[r~)n) hijr)mi>

m[Lv) aipvini rh[S[ an[ ai s[Àpl s)l kr) miºy l[bi[r[Tr) mirft Y)kn[S, D[ºs)T) tYi b)Ty&m)ns kºT[Tni p(rxN kriv) p(rNimi[

m[Lvvini rh[S[. s>ti[P kirk p(rNimi[ aiÄyi s&F) Dimrkimn) c&kvvipi#i rkmni 5 Tki rkm v)Yh[ÃD riKvimi> aivS[ j[ rkm s>ti[Pkirk

p(rNimi[ mÇyi bid j C&T) kriS[. pr>t& s>ti[Pkirk p(rNimi[ n(h m[Lvvini (kAsiai[mi> krirn) aºy Srti[ an&sir kiy<vih) Ye SkS[.

2. $i. 100 liK k[ t[Y) vF& rkmni krir h[qLni kim pr eÔrdir[ f&lTiem kvi[l)fieD a[ºJ(nyr (ny&k_i krvini[ rh[S[ j[ a>g[ kimni

vk<ai[D<r mÇy[ (dn-15 mi> kiy<pilk ejn[r~)n) ÔN h[qL, niyb kiy<pilk ejn[r~)n[ (ny&k_i ejn[rni nim, kvi[l)f)k[Sn, mik<S)T,

sT)<f)k[T, klr fi[T[g\if, (ny&k_i)ni h&km vg[r[ (vgt rj& krvin) rh[S[ tYi kim pr hijr Yyi a>g[ni[ r)pi[T< aipvini[ rh[S[. j[ an&sir

krir h[qLni kim pr ki[vl)fieD ejn[rn) upri[k_i Srt m&jb (ny&k_i) Yiy tYi AYL pr Kr[Kr kimg)r) n s>BiL[ Ryi> s&F)ni

smygiLi t[mj kim cil& rh[ t[ smy drÀyin (ny&k_i kr[l ejn[r kimg)r) s>BiLS[ n*hti[ t[ smygiLi miT[ $i. 15000/- p\(tmis l[K[

(blmi>Y) kpit krvimi> aivS[ j[ ni[ r)f>D[bl rh[S[.

Executive Engineer R. & B. Division

Palanpur

Signature of Contractor Deputy Executive Engineer R. & B. Sub Division

Ambaji