bill of quantities (civil works) - package 4 · bill of quantities (civil works) - package 4 page 1...

BILL OF QUANTITIES (Civil works) - PACKAGE 4

of 11

Name of Work: Construction of 4 storied, 2 units residential buildings at Phuentsholing (Category-III)

in figure in words A) CLEARING & EARTH WORKS

A1

Clearing jungle including uprooting of vegetation & trees of girth < 300mm & disposal within 50m of the site sqm. 516.59

A2

Felling trees including cutting of trunks and branches, removal of roots, stacking of serviceable materials and disposal of rubbish within 50m lead Girth < 1200mm

each 10.00

A3

Earth work in excavation over areas, depth >300mm, width >1.5m, area >10 Sq.m on plan, including disposal of excavated earth at appropriate disposal site with proper levelling as required as per the instruction: All kinds of soil inclusive of ordinary rocks, boulders etc. (No extra payment will be made for disposal of earth works irrespective of lead, so the contractors are asked to visit the site before quoting the rate) cum. 1291.47

A4

Excavation in foundation trenches or drains not exceeding 1.5m in width or area 10 sq.m on plan, including dressing & ramming; disposal of surplus soil and levelling as required as instructed by the engineer in-charge; All kinds of soil inclusive of oridinary rocks, boulders cum. 528.07

A5

Filling of trenches, sides of foundations etc. in layers <200mm using selected excavated earth, ramming etc. within lead 50 m & lift 1.5m cum. 176.02

A6

Providing & laying dry earth bedding, including consolidating each deposited layer by watering, ramming and dressing

cum. 31.80

A7

Hand excavation and refilling in layers < 200mm, of trenches for pipes & sockets, cables, including dressing of sides/ ramming of bottom, depth upto 1.5m, disposal of surplus material within lead of 50m: All kinds of soil - Pipes, cables etc. 80mm < dia < 300mm

mtr. 33.82B) STONE WORKS

Amount(Nu) Rate(Nu) Ref# Item Description Unit Quantity


of 11


in figure in words Amount(Nu) Rate(Nu) Ref# Item Description Unit Quantity

B1

Providing & laying Random Rubble Masonry with hard stone in cement mortar 1:4 for all height

cum. 79.87

B2Providing and laying Hand packed stone filling or soling with selected hard stones. cum. 67.64

C) CONCRETE WORKS

C1

Providing and laying in position plain cement concrete excluding the cost of centering and shuttering

C1.11:2:4 (1 cement : 2 sand : 4 graded crushed rock 40 mm nominal size) cum. 29.05


C1.31:4:8 (1 cement : 3 sand : 6 graded crushed rock 20-40 mm nominal size) cum. 8.15

C2

Providing & laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 sand : 3 graded crushed rock 20 mm nominal size) excluding the cost of centering, shuttering and reinforcement;

C2.1All work upto plinth cum. 66.62

C2.2Columns , pillars, posts, fillets and struts etc. cum. 56.08

C2.3Beams, lintels, bands, plain window sills, staircases etc. cum. 86.39

C2.4Suspended floor, roofs having slope upto 15o, landings, balconies, shelves etc. cum. 86.63

C3

Providing & fixing Thermo‐Mechanically Treated reinforcement bar (Yield Strength 500 MPa) for R.C.C work including cutting, bending, binding and placing in position complete Kg 47,069.64

D) FORM WORKS

D1

Providing & fixing centering and shuttering (formwork), including strutting, propping etc. and removal of formwork.

D1.1Foundation and plinth sqm. 143.22

D1.2Columns, pillars, post, struts etc. sqm. 487.71

D1.3 Beams, lintels, bands, plain window sills, staircases etc. sqm. 873.58


of 11



D1.4Suspended floor, roof, landing, shelves and their supports, balconies sqm. 698.73

D1.5 Staircase (except spiral staircase) sqm. 81.06E) FLOORING WORKS

E1

Providing & laying 40mm thick marble chips flooring top layer 6mm thick with white, black or black and white marble chips of nominal size 1.5- 3mm in proportion 1:2 (cement: chips), on 34mm thick concrete base in cement concrete 1:2:4, 12.5mm aggregate ( cement and marble powder mix shall be of the ratio 3 part of cement to 1 part of marble powder) in white cement sqm. 545.61

E2

Providing & fixing white/ coloured glazed tiles in flooring, treads of steps and landings laid on bed of 12mm thick cement mortar 1:3 finished with flush pointing in white cement (BRANDS- Approved brand of BSB) -300X200mm sqm. 65.84

E3

Providing & fixing Terrazzo or Marble chips skirting < 300mm height top layer 6mm thick with white or black, black and white marble chips size 4mm in proportion 1:2, laid on 12.5mm thick cement plaster 1:3 base in white cement sqm. 85.23

E4

Providing & fixing glass strips in concrete flooring as specified in drawing complete. mtr. 1380.67

E5

Providing & laying Granite flooring for work top for kitchens, shelfs etc. as specified in the drawing complete sqm. 25.58

F) WALL WORKS

F1

Providing & laying Concrete Brick Masonry (250mm) in cement mortar 1:4 for all heights complete cum. 193.40

F2

Providing & laying Concrete Half-brick Masonry (125 mm) in cement mortar 1:4 for all heights complete sqm. 597.09

F3

Providing and fixing vitrified wall tiles as specified in the drawing complete (BRANDS- Approved brand of BSB) -300X200mm sqm. 324.65

G) DOORS & WINDOWS


of 11



G1

Providing and Fixing of Pre-fabricated Door Frame and Shutter of Steel Hollow Section, Steel Plates, 35mm Champ wood including a coat of wood primer and two coats of synthetic enamel paint, repair of walls and all its accessories and fittings as specified in the drawings complete (Sizes as per the Architectural drawing) )

G1.1

Door Type D (Rate is inclusive of Anodised Aluminium fittings; 2-150mm tower bolt, 2-150mm handle, 6-75mm hinges & mortice lock) -Panelled Door set 8.00

G1.2

Door Type D1 (Rate is inclusive of Anodised Aluminium fittings; 2-150mm tower bolt, 2-150mm handle, 6-75mm hinges & mortice lock) -Flush Door set 16.00

G1.3


G2

Providing and Fixing of Pre-fabricated window Frame and shutter of steels, 4mm plain/frosted glass including aluminium paints, MS safety bars, repair of walls with all accessories/fittings complete (Sizes as per the Architectural drawing) )

G2.1

Window Type W2 (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 8.00

G2.2

Window Type W3 (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 28.00

G2.3

Window Type RW (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 4.00


of 11



G2.4

Window Type KW (Rate is inclusive of Aluminium fittings; 2-100mm tower bolt, 1-125mm handle, 3-75mm hinges & 1-100mm hook & eye) set 8.00

G2.5

Window Type V (Rate is inclusive of Aluminium fittings; 1-100mm tower bolt, 1-125mm handle, 2-75mm hinges & 1-100mm hook & eye) set 16.00

H) DOORS & WINDOWS ACCRSSORIES AND CLAMPS

H1

Providing & fixing M.S hold fast 400mm long, fixing to frame with 10mm bolts & nuts, plugs, concrete blocks 300x100x150mm with 1:3:6, 20mm concrete each 616.00

H2

Providing & fixing M.S. fan clamps of 16 mm dia. In R.C. slabs, including painting with red lead paint each 24.00

I) WOOD WORKS

I1

Providing & fixing undressed Wood Work for eave including the cost of nails and screws complete - Mixed Conifer cum. 2.03

I2Providing & fixing 20X20mm opening mesh for eave lining as per the drawing complete sqm. 154.46

I3

Providing & fixing Eaves board (225x25mm) with moulding fitted and fixed with necessary screws- Mixed Conifer mtr. 77.23

I4

Providing & fixing 100x12mm, with 25mm dia. wooden curtain rod and brackets including M.S flats 25x3x100mm and plugs etc. complete mtr. 252.92

I5

Providing and fixing anodised aluminium kicking plate, 4mm thick with necessary aluminium screws etc complete sqm. 14.40

J) ROOFING & STEEL WORKS


of 11



J1

Providing, fabricating to required profile and shape, transporting, erecting and fixing in position structural steel work in trusses, purlins and all steel structural items like plates, straps, flats, bolts, nuts & washer including its testing, allowance for all types of wastage's, straightening, cutting, bending of section wherever specified, welding, full strength butt welding or as specified, drilling holes, bolting, provision of necessary tools, testing etc. The rate shall also include application of primers & paints as per drawings and specifications complete; Tie Beam, Principle Rafter, Struts and Purlins - 60.03mm OD, 3.6mm thick mtr. 987.18

J2

Providing & fixing Corrugated Galvanised Iron(CGI) sheeting including bolts, hooks & nuts 8mm dia. With bitumen and GI limpet washer filled with white lead for connection as per the drawing - 24G sq.m 334.50

J3

Providing & fixing ridges or hips in plain GI including bolts, hooks and nuts 8mm dia. GI limpet and bitumen washers for connection - 24G. mtr. 47.44

J4

Providing & fixing 200mm PVC gutter, including brackets, bolts, nuts, washers & rain water pipes connections, excluding the cost of pipes. mtr. 77.23

J5

Providing and fixing on wall face single socketed rigid PVC ( Working Pressure 4kgf per sq.cm) rain water pipes including jointing with seal ring leaving 10mm gap for thermal expansion, complete - 110mm dia. mtr. 31.12

K) CORNICES


of 11



K1

Bhutan type Traditional Cornices in R.C.C 1:1.5:3, 20 mm aggregate including cost of formwork including finishing with 6mm thick plaster on the exposed surface with cement mortar 1:3, excluding reinforcement & decorative painting cost as per standard design (Measurement to be taken along the cornice and wall junction)

K1.1Multi-Storied building including the cost of lhanglag. mtr. 20.73

K1.2

Multi-Storied building bhos.. at all all floor levels (excluding the cost of phana) mtr. 26.29

K1.3 Phana mtr. 26.29

K1.4Lintel Cornice (Only Cornice Portion at external face) mtr. 252.92

L) RAILINGS WORKS

L1

Providing & Fixing of Staircase Railing in Mild Steel for hand rail, vertical post etc for all MS items and including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete (Measurement to be taken along end to end vertical railing post)

mtr. 20.85

L2

Providing & Fixing of Balcony Railing in Mild Steel including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete (Measurement to be taken along end to end vertical railing post)

mtr. 73.20

L3

Providing & Fixing of Landing Railing in Mild Steel including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete Set 8.00

M) FINISHINGS WORKS

M1

Providing & laying 6mm cement plaster (in ceilings) in CM 1:4 or otherwise specified in drawing. sqm. 611.45


of 11



M2

Providing & laying 12mm plaster on internal brick wall surface in cement mortar 1:4 and making grooves at the wall/ceiling and wal/wall junction including mixing water - proofing materials in propotion recommended by the manufacturers complete.

sqm. 2013.41

M3

Providing & laying 15mm cement plaster on the external wall surface in cement mortar 1:4 including finishing with floating coat of neat cement for plinth complete. sqm. 815.76

M4

Providing & laying 30mm plain cement mortar band in C.M 1:4 -Raised band sqm. 22.69

M5

Providing and applying water/weather proof paint including base coat or otherwise as specified in the drawing complete (Sample & colour to be approved by Architect) sqm. 815.76

M6

Providing and applying finishing coats Acrylic washable distemper, two coats on new work, including a coat of primer or as per the drawing complete (Sample & colour to be approved by Architect) sqm. 2624.86

M7

Providing and applying two coats of red corrugal, ready mixed on GI sheets including one coat of synthetic red oxide primer base complete. sqm. 334.50

M8

Providing & applying two coats of synthetic enamel paint for steel and wood work for eave board, battens, pelmets etc. including one coat of pink primer complete.. sqm. 283.38

M9

Providing, preparing & applying Sumdang washable Traditional Bhutanese Paintings (Ding) on all cornices. sqm. 268.27

N) PLUMBING WORKS

N1

Providing & fixing CPVC. pipes including CPVC fittings & clamps & repair walls complete

N1.1 15mm dia. mtr. 142.52

N1.2 25mm dia. mtr. 125.75


of 11



N1.3 32mm mtr. 22.98

N2

Providing & fixing P.V.C soil waste and vent pipes, single or double socketed, including PVC fittings, pipe clips all complete;

N2.1 75mm dia mtr. 111.59

N2.2 110mm dia mtr. 61.85

N3

Providing & laying H.D.P.E Pipes including H.D.P.E fittings pressure class 6 kg/sq.cm (excluding trenching, refilling & thrust block) -110mm -(BRAND- Rabten & Druk pipes) mtr. 33.82

N4

Providing & fixing PVC Nahani Trap - 110mm inlet & 75mm outlet otherwise as per the drawing complete. each 24.00

N5

Providing & fixing European-type vitreous china w.c pedestal including seat and lid with c.p brass hinges, 15 lit low level plastic cistern, fittings, brackets, repair walls -white, with plastic seat & lid complete set 8.00

N6

Providing & fixing Indian-type vitreous china w.c squatting pan, including 100 mm H.C.I P or S trap, 10 lit low level plastic cistern & fittings, repair walls -500mm, white including white vitreous china foot rests (250x130x30mm) for Indian WC. set 8.00

N7

Providing & fixing of viterous china wash basin including the cost of pedestals, brass chain & rubber plug, waste, basin trap and all connection and fittings complete-Flat back wash basin 550x400mm with single 15mm c.p. brass pillar tap or otherwise as specified in the drawing -(BRAND- approved brand of BSB) set 16.00

N8

Providing & fixing Stainless Steel kitchen sink including sink trap and all connection & fittings complete - Stainless steel, 940 x 460 x 160 mm, single bowl & drain-board or otherwise as specified in the drawing complete set 8.00


of 11



N9

Providing & fixing wall shower mixer with with over head shower arm including all its fittings complete-(BRAND- approved brand of BSB) each 16.00

N10

Providing & fixing bibcock 15mm, standard vertical. cp knob or otherwise specified in the drawing complete. each 16.00

N11

Providing & fixing toilet paper holder of Recessed ceramic, roll‐type, 150 x 150 mm or as per the drawing complete. each 16.00

N12

Providing & fixing CP towel rail 600X20mm with CP brass brackets fixed to wooden cleats complete or otherwise specified in the drawing complete. each 16.00

N13

Providing & fixing brass stop cock, standard, knob as specified in the drawing.

N13.1 15mm dia. each 48.00

N13.2 25mm dia. each 8.00

N14Providing & fixing brass full way valve with wheel -32mm each 8.00

N15

Providing & fixing of bevelled edge mirror(superior quality glass) including 4mm A.C sheet base fixed to wooden cleats (sizes- 600X450mm) or as specified in the drawing. each 16.00

N16

Providing & fixing plastic tank including all accessories complete -3000 litre capacity each 2.00

N17

Constructing second class brick masonry open surface drain in cement mortar 1:4 including earth work in excavation 100 mm thick concrete bed 1:5:10, 40mm aggregate and 25mm thick cement concrete 1:2:4,12 mm aggregate for filling haunches including 12mm cement plastering 1:4 with a floating coat of neat cement and disposal of surplus earth etc. complete -250X300mm mtr. 84.06


of 11



N18

Providing & laying Plinth Protection of Anti skid Concrete tiles 600X600mm at 1degree slope maintained towards drain laid over 75 thick PCC 1:3:6,20mm aggregate on a base of 150mm thick stone soling. The stone soling shall be laid over a prepared bed of selected earth rammed in layers <200mm including consolidation each deposited layer with water complete or other wise specified in the drawing sq.m 147.10

N19

Providing & fixing MCPB compartment of bricks, steel works including fittings & paints etc. below stairs. set 1.00

Total Quoted Amount: Nu:

Rebate if Any

Total Amount (1 Block) Nu:

Total Amount (4 Blocks) Nu:


Page 1 of 11

Name of Work : Construction of 4 storied,2 units residential buildings at Phuentsholing (Category-IV)

in figure in words Amount(Nu) A) CLEARING & EARTH WORKS

A1

Clearing jungle including uprooting of vegetation & trees of girth < 300mm & disposal within 50m of the site sqm. 417.64

A2

Felling trees including cutting of trunks and branches, removal of roots, stacking of serviceable materials and disposal of rubbish within 50m lead Girth < 1200mm

each 20.00

A3

Earth work in excavation over areas, depth >300mm, width >1.5m, area >10 Sq.m on plan, including disposal of excavated earth at appropriate disposal site with proper levelling as required as per the instruction: All kinds of soil inclusive of ordinary rocks, boulders etc. (No extra payment will be made for disposal of earth works irrespective of lead, so the contractors are asked to visit the site before quoting the rate) cum. 1044.09

A4

Excavation in foundation trenches or drains not exceeding 1.5m in width or area 10 sq.m on plan, including dressing & ramming; disposal of surplus soil and levelling as required as instructed by the engineer in-charge; All kinds of soil inclusive of oridinary rocks, boulders cum. 286.12

A5

Filling of trenches, sides of foundations etc. in layers <200mm using selected excavated earth, ramming etc. within lead 50 m & lift 1.5m cum. 95.37

A6

Providing & laying dry earth bedding, including consolidating each deposited layer by watering, ramming and dressing

cum. 30.64

A7

Hand excavation and refilling in layers < 200mm, of trenches for pipes & sockets, cables, including dressing of sides/ ramming of bottom, depth upto 1.5m, disposal of surplus material within lead of 50m: All kinds of soil - Pipes, cables etc. 80mm < dia < 300mm

mtr. 18.00B) STONE WORKS

Rate(Nu) Ref# Item Description Unit Quantity


Page 2 of 11



B1

Providing & laying Random Rubble Masonry with hard stone in cement mortar 1:4 for all height

cum. 71.65

B2Providing and laying Hand packed stone filling or soling with selected hard stones. cum. 36.32

C) CONCRETE WORKS

C1

Providing and laying in position plain cement concrete excluding the cost of centering and shuttering



C1.31:4:8 (1 cement : 4 sand : 8 graded crushed rock 20-40 mm nominal size) cum. 5.36

C2

Providing & laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 sand : 3 graded crushed rock 20 mm nominal size) excluding the cost of centering, shuttering and reinforcement;

C2.1All work upto plinth lvl cum. 43.46

C2.2 Columns , pillars, posts, fillets and struts etc. cum. 42.66

C2.3

Beams, lintels, bands, plain window sills, staircasesstaircases, spiral staircases upto floor five level cum. 66.52

C2.4Suspended floor, roofs having slope upto 15o, landings, balconies, shelves etc. cum. 52.92

C3

Providing & fixing Thermo‐Mechanically Treated reinforcement bar (Yield Strength 500 MPa) for R.C.C work including cutting, bending, binding and placing in position complete Kg 32,906.87

D) FORM WORKS

D1

Providing & fixing centering and shuttering (formwork), including strutting, propping etc. and removal of formwork.

D1.1Foundation and plinth. sqm. 121.80

D1.2Columns, pillars, post, struts etc. sqm. 413.31


Page 3 of 11



D1.3 Lintels, beams, girders, bresummers, cantilevers etc. sqm. 610.34

D1.4Suspended floor, roof, landing, shelves and their supports, balconies sqm. 441.36

D1.5 Staircase (except spiral staircase) sqm. 36.27E) FLOORING WORKS

E1

Providing & laying 40mm thick marble chips flooring top layer 6mm thick with white, black or black and white marble chips of nominal size 1.5- 3mm in proportion 1:2 (cement: chips), on 34mm thick concrete base in cement concrete 1:2:4, 12.5mm aggregate ( cement and marble powder mix shall be of the ratio 3 part of cement to 1 part of marble powder) in white cement sqm. 429.54

E2

Providing & fixing white/ coloured glazed tiles in flooring, treads of steps and landings laid on bed of 12mm thick cement mortar 1:3 finished with flush pointing in white cement (BRANDS- Approved brand of BSB) -300X200mm sqm. 26.35

E3

Providing & fixing Terrazzo or Marble chips skirting < 300mm height top layer 6mm thick with white or black, black and white marble chips size 4mm in proportion 1:2, laid on 12.5mm thick cement plaster 1:3 base in white cement sqm. 77.68

E4

Providing & fixing glass strips in concrete flooring as specified in drawing complete. mtr. 974.82

E5

Providing & laying Granite flooring for work top for kitchens, shelfs etc. as specified in the drawing complete sqm. 17.01

F) WALL WORKS

F1

Providing & laying Concrete Brick Masonry (250mm) in cement mortar 1:4 for all heights complete cum. 154.63

F2

Providing & laying Concrete Half-brick Masonry (125 mm) in cement mortar 1:4 for all heights complete sqm. 383.36


Page 4 of 11



F3

Providing and fixing vitrified wall tiles as specified in the drawing complete (BRANDS- Approved brand of BSB) -300X200mm sqm. 87.00

G) DOORS & WINDOWS

G1

Providing and Fixing of Pre-fabricated Door Frame and Shutter of Steel Hollow Section, Steel Plates, 35mm Champ wood including a coat of wood primer and two coats of synthetic enamel paint, repair of walls and all its accessories and fittings as specified in the drawings complete (Sizes as per the Architectural drawing) )

G1.1

Door Type D (Rate is inclusive of Anodised Aluminium fittings; 2-150mm tower bolt, 2-150mm handle, 6-75mm hinges & mortice lock) -Panelled Door set 8.00

G1.2


G1.3


G2

Providing and Fixing of Pre-fabricated window Frame and shutter of steels, 4mm plain/frosted glass including aluminium paints, MS safety bars, repair of walls with all accessories/fittings complete (Sizes as per the Architectural drawing) )

G2.1

Window Type W2 (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 16

G2.2

Window Type W3 (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 18


Page 5 of 11



G2.3

Window Type RW (Rate is inclusive of Aluminium fittings; 4-100mm tower bolt, 2-125mm handle, 6-75mm hinges & 2-100mm hook & eye) set 6

G2.4

Window Type KW (Rate is inclusive of Aluminium fittings; 2-100mm tower bolt, 1-125mm handle, 3-75mm hinges & 1-100mm hook & eye) set 8

G2.5

Window Type V (Rate is inclusive of Aluminium fittings; 1-100mm tower bolt, 1-125mm handle, 2-75mm hinges & 1-100mm hook & eye) set 8

H) DOORS & WINDOWS ACCRSSORIES AND CLAMPS

H1

Providing & fixing M.S hold fast 400mm long, fixing to frame with 10mm bolts & nuts, plugs, concrete blocks 300x100x150mm with 1:3:6, 20mm concrete each 500.00

H2

Providing & fixing M.S. fan clamps of 16 mm dia. In R.C. slabs, including painting with red lead paint each 24.00

I) WOOD WORKS

I1

Providing & fixing undressed Wood Work for eave including the cost of nails and screws complete - Mixed Conifer cum. 1.97

I2Providing & fixing 20X20mm opening mesh lining as per the drawing complete sqm. 112.10

I3

Providing & fixing Eaves board (225x25mm) with moulding fitted and fixed with necessary screws- Mixed Conifer mtr. 64.00

I4

Providing & fixing 100x12mm, with 25mm dia. wooden curtain rod and brackets including M.S flats 25x3x100mm and plugs etc. complete mtr. 200.84

I5

Providing and fixing anodised aluminium kicking plate, 4mm thick with necessary aluminium screws etc complete sqm. 8.64

J) ROOFING & STEEL WORKS


Page 6 of 11



J1

Providing, fabricating to required profile and shape, transporting, erecting and fixing in position structural steel work in trusses, purlins and all steel structural items like plates, straps, flats, bolts, nuts & washer including its testing, allowance for all types of wastage's, straightening, cutting, bending of section wherever specified, welding, full strength butt welding or as specified, drilling holes, bolting, provision of necessary tools, testing etc. The rate shall also include application of primers & paints as per drawings and specifications complete; Tie Beam, Principle Rafter, Struts and Purlins - 60.03mm OD, 3.6mm thick mtr. 897.00

J2

Providing & fixing Corrugated Galvanised Iron(CGI) sheeting including bolts, hooks & nuts 8mm dia. With bitumen and GI limpet washer filled with white lead for connection as per the drawing - 24G sq.m 252.76

J3

Providing & fixing ridges or hips in plain GI including bolts, hooks and nuts 8mm dia. GI limpet and bitumen washers for connection - 24G. mtr. 42.00

J4

Providing & fixing 200mm PVC gutter, including brackets, bolts, nuts, washers & rain water pipes connections, excluding the cost of pipes. mtr. 64.00

J5

Providing and fixing on wall face single socketed rigid PVC ( Working Pressure 4kgf per sq.cm) rain water pipes including jointing with seal ring leaving 10mm gap for thermal expansion, complete - 110mm dia. mtr. 31.00

K) CORNICES


Page 7 of 11



K1

Bhutan type Traditional Cornices in R.C.C 1:1.5:3, 20 mm aggregate including cost of formwork including finishing with 6mm thick plaster on the exposed surface with cement mortar 1:3, excluding reinforcement & decorative painting cost as per standard design (Measurement to be taken along the cornice and wall junction)

K1.1Multi-Storied building including the cost of lhanglag. mtr. 24.50

K1.2

Multi-Storied building bhos.. at all all floor levels (excluding the cost of phana) mtr. 29.00

K1.3 Phana mtr. 29.00

K1.4Lintel Cornice (Only Cornice Portion at external face) mtr. 150.44

L) RAILINGS WORKS

L1

Providing & Fixing of Staircase Railing in Mild Steel for hand rail, vertical post etc for all MS items and including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete (Measurement to be taken along end to end vertical railing post)

mtr. 17.00

L2

Providing & Fixing of Balcony Railing in Mild Steel including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete (Measurement to be taken along end to end vertical railing post)

mtr. 36.00

L3

Providing & Fixing of Landing Railing in Mild Steel including welding, cutting, hoisting and applying black exterior weather resistant paints as indicated in the drawing complete set 8.00

M) FINISHINGS WORKS

M1

Providing & laying 6mm cement plaster (in ceilings) in CM 1:4 or otherwise specified in drawing. sqm. 429.54


Page 8 of 11



M2

Providing & laying 12mm plaster on internal brick wall surface in cement mortar 1:4 and making grooves at the wall/ceiling and wal/wall junction including mixing water - proofing materials in propotion recommended by the manufacturers complete.

sqm. 1296.20

M3

Providing & laying 15mm cement plaster on the external wall surface in cement mortar 1:4 including finishing with floating coat of neat cement for plinth complete sqm. 618.53

M4

Providing & laying 30mm plain cement mortar band in C.M 1:4 -Raised band sqm. 31.34

M5

Providing and applying water/weather proof paint including base coat or otherwise as specified in the drawing complete (Sample & colour to be approved by Architect) sqm. 618.53

M6

Providing and applying finishing coats Acrylic washable distemper, two coats on new work, including a coat of primer or as per the drawing complete (Sample & colour to be approved by Architect) sqm. 1725.74

M7

Providing and applying two coats of red corrugal, ready mixed on GI sheets including one coat of synthetic red oxide primer base complete. sqm. 252.76

M8

Providing & applying two coats of synthetic enamel paint for steel and wood work for eave board, battens, pelmets etc. including one coat of pink primer complete.. sqm. 231.32

M9

Providing, preparing & applying Sumdang washable Traditional Bhutanese Paintings (Ding) on all cornices complete sqm. 179.33

N) PLUMBING WORKS

N1

Providing & fixing CPVC pipes including CPVC fittings & clamps & repair walls complete

N1.1 15mm dia. mtr. 94.71


Page 9 of 11



N1.2 25mm dia. mtr. 58.59

N1.3 32mm mtr. 18.34

N2

Providing & fixing P.V.C soil waste and vent pipes, single or double socketed, including PVC fittings, pipe clips all complete;

N2.1 75mm dia mtr. 49.67

N2.2 110mm dia mtr. 32.55

N3

Providing & laying H.D.P.E Pipes including H.D.P.E fittings pressure class 6 kg/sq.cm (excluding trenching, refilling & thrust block) -110mm -(BRAND- Rabten & Druk pipes) mtr. 18.00

N4

Providing & fixing PVC Nahani Trap - 110mm inlet & 75mm outlet otherwise as per the drawing complete. each 16.00

N5

Providing & fixing Indian-type vitreous china w.c squatting pan, including 100 mm H.C.I P or S trap, 10 lit low level plastic cistern & fittings, repair walls -500mm, white including foot rests (250x130x30mm) for Indian Wc. complete. set 8.00

N6

Providing & fixing of viterous china wash basin including the cost of pedestals, brass chain & rubber plug, waste, basin trap and all connection and fittings complete-Flat back wash basin 550x400mm with single 15mm c.p. brass pillar tap or otherwise as specified in the drawing -(BRAND- approved brand of BSB) set 8.00

N7

Providing & fixing Stainless Steel kitchen sink including sink trap and all connection & fittings complete - Stainless steel, 940 x 460 x 160 mm, single bowl & drain-board or otherwise as specified in the drawing complete set 8.00


Page 10 of 11



N8

Providing & fixing wall shower with over head shower arm including all its fittings complete-15mm(BRAND- approved brand of BSB) each 8.00

N9

Providing & fixing bibcock 15mm, standard vertical. cp knob or otherwise specified in the drawing complete. each 8.00

N10

Providing & fixing toilet paper holder of Recessed ceramic, roll‐type, 150 x 150 mm or as per the drawing complete. each 8.00

N11

Providing & fixing CP towel rail 600X20mm with CP brass brackets fixed to wooden cleats complete or otherwise specified in the drawing complete. each 8.00

N12

Providing & fixing brass stop cock, standard, knob as specified in the drawing.

N12.1 15mm dia. each 24.00

N12.2 25mm dia. each 8.00

N13Providing & fixing brass full way valve with wheel -32mm each 8.00

N14

Providing & fixing of bevelled edge mirror(superior quality glass) including 4mm A.C sheet base fixed to wooden cleats (sizes- 600X450mm) or as specified in the drawing. each 8.00

N15

Providing & fixing plastic tank including all accessories complete -3000 litre capacity each 2.00

N16

Constructing second class brick masonry open surface drain in cement mortar 1:4 including earth work in excavation 100 mm thick concrete bed 1:5:10, 40mm aggregate and 25mm thick cement concrete 1:2:4,12 mm aggregate for filling haunches including 12mm cement plastering 1:4 with a floating coat of neat cement and disposal of surplus earth etc. complete -250X300mm mtr. 64.00


Page 11 of 11



N17

Providing & laying Plinth Protection of Anti skid Concrete tiles 600X600mm at 1degree slope maintained towards drain laid over 75 thick PCC 1:3:6,20mm aggregate on a base of 150mm thick stone soling. The stone soling shall be laid over a prepared bed of selected earth rammed in layers <200mm including consolidation each deposited layer with water complete or other wise specified in the drawing sq.m 109.31

N18

Providing & fixing MCPB compartment of bricks, steel works including fittings & paints etc. below stairs. set 1.00

Total Quoted Amount: Nu:

Rebate if Any

Total Amount (1 Block) Nu:

Total Amount (4 Blocks) Nu:

of 3

Name of work : Site Development works for Phuentsholing Housing Project at Amochu site A - Package 4 Sub-Head : C/o Road, Parking, Storm water drain, Footpath related works, septic tank, soak pit & manhole chambers

Sl.no. Item Description Unit Quantity Amount (Nu)In figure In words

A ROAD & PARKING RELATED WORKS.

A1

Earth work in excavation over areas, depth >300mm, width >1.5m, area >10 Sq.m on plan, including disposal of excavated earth within 50m lead and 1.5m lift & disposed soil to be neatly dressed; All kinds of soil

cum 311.22

A2

Preparation of sub grade with proper camber by excavating earth to depth equal to pavement thickness, consolidation with roller, including disposal of excavated earth & rubbish at a appropriate places as as per the instruction of site engineer; All kinds of soil

cum 311.22

A3

Providing and laying Granular sub-base course (GSB) to required degree of compaction with proper formation of cross fall using motor grader for laying and compacted to required density as per material gradation and aggregate quality specified - 150mm thick

cum 196.07

A4

Providing and laying wet mix macadam graded aggregate base course to required degree of compaction with proper formation of cross fall by using well graded crushed aggregates premixed with OMC using suitable mixer, motor grader as per material gradation and a aggregates quality specified- 100mm thick

cum 130.71

A5

Scarifying metalled (water bound) road surface disposal of rubbish up to 50m and consolidation of the aggregate received from scarifying

Sqm 1244.86

A6

Providing and Laying Dense Bituminous Macadam ( DBM) to required degree of compaction based on mixture design ( job mix formula) approved by the supervising engineer including preparation of surface with road broom application of prime coat @ 0.75 kg/sq.m by mechanized method using asphalt plant, paver, steel roller, tyre roller etc. complete, - 50mm thick

sqm 1244.86

Rate

BILL OF QUANTITIES

of 3


Rate

A7

Construction of Lined V Shaped drain with 50mm thick PCC 1:2:4, 150mm thick stone soling, RRM in CM 1:5 on sides, finished with 20mm thick 1:4 cement plaster including excavation, levelling and disposal of surplus earth within 50m or otherwise as specified in the drawing (Size-refer drawing)

mtr 144.00

A8

Providing and laying Hammer dressed stone edging 150 x 250 mm with stones including excavation, refilling and disposal of surplus earth within 30 m lead or otherwise as specified in the drawing.

mtr 149.47

B STORM WATER DRAIN & FOOTPATH

B1

Constructing Random Rubble masonry storm water drain in cement mortar 1:4 including earth work in excavation, 150mm stone soling, 50mm thick PCC 1:3:6, 20- 40mm aggregate, precast slab over the drain including 25mm cement plastering 1:4 with a floating coat of neat cement and disposal of surplus earth etc. - size as specified in the drawing complete

mtr 170.00

B2

Constructing paver blocks footpath including earth work in excavation, 150mm stone soling, 40mm thick sand bedding, concrete edging in 1:3:6 etc, and disposal of surplus earth complete as per the drawing

sqm 219.60

C SEPTIC TANK, SOAK PIT, MANHOLE CHAMBERS & SEWERAGE WORKS

C1

Constructing Septic Tanks, in Brick Masonry in cement mortar 1:4, including fittings, C.I cover with frame, cement base in C.C 1:3:6, soling, RCC slab in 1:1.5:3, finished 20mm cement plaster etc. all complete as per standard design (Size- refer detail drawings)- 320 Users

each 1

C2

Constructing Soak Pit with 250mm dry wall brick wall filled with aggregates, sand casing including dry brick chamber and SW drain pipe X 1800mm long as specified in the drawing complete (Size- refer detail drawings)

each 1

of 3


Rate

C3

Constructing Chambers and Intercetion pits with Brickworks in cement mortar 1:5, R.C.C top slab with 1:1.5:2, 20mm aggregates, foundation concrete 1:2:4, 40mm agrregates and 1:3:6, 40mm aggregates, 12mm plaster in CM 1:3 finished with floating coat of neat cement/SIKA top and making channels in cement concrete 1:2:4, 20mm aggregates, neatly finished including CI cover with , making channels & frame with neat finished all complete (Size- Refer detail drawings);

C3.1 Inspection Chamber (IC) each 11C3.2 Intertception Pit (IP) each 24

C4

Providing & laying H.D.P.E Pipes including H.D.P.E fittings pressure class 6 kg/sq.cm or as specified in the drawing (Brand - Rabten & Druk Pipes)

C4.1 160mm mtr 218.25

C4.2 225mm mtr 80.97

C5

Hand excavation and refilling in layers < 200mm, of trenches for pipes & sockets, cables, including dressing of sides/ ramming of bottom, depth upto 1.5m, disposal of surplus material within lead of 50m: All kinds of soil -Pipes, cables etc. 80mm < dia < 300mm

mtr 299.22

D SITE OFFICE

D

Construction of a Site Office (48 square meter plinth area) consisting of a office ( 6m x 4m), room(4m x 3.5m), kitchen( e 2.5m x 2.5m) and a toilet (1.5m x 2.5m) including all fittings complete etc.

Lumpsum 1.00

Total Amount …………….....………………………...Nu.:

Rebate if any..……………………..………………….Nu.:

Total with Rebate …….……………….……….....…..Nu.:

of 5

Sl. No. Description of the items Qty. Unit Amount (Nu.)

In Figure In Words

A.

1

Wiring for light, call bell and 2 pin light socket outlet with 1.5 sq.mm 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe including connections, painting, testing and commissioning etc. as required

i Short point 2 Pointii Medium point 64 Pointiii Long point 42 Point

2

Wiring for ceiling fans with 1.5 sq.mm 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe with fan regulator including connections, painting, testing and commissioning etc. as required

i Medium point 8 Pointii Long point 16 Point

3Wiring for lighting circuit with 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe including connections, painting, testing and commissioning etc. as required

i 2x2.5sq.mm 200 Meter

4

Wiring for 3 pin, 16 Ampere plug point with 4 sq.mm 1.1kV grade, PVC insulated copper conductor cable and bare copper wire of 2.5 mm dia. in recessed HDPE pipe with providing and fixing 3 pin, 16 ampere socket outlet and switch including earthing third pin and connections, painting, testing and commissioning etc. as required


5

Wiring for 3/5 pin, 6 Ampere plug point with 2.5 sq.mm 1.1kV grade, PVC insulated copper conductor cable and bare copper earth continuity wire of 2.5 mm dia. in recessed HDPE pipe with providing and fixing 3/5 pin, 6 ampere socket outlet and switch including earthing the third pin, connections, painting, testing and commissioning etc. as required


6

Wiring for points in excess length above long points with 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe including bare copper wire 2.5 sq.mm for earth continuity along with power point, connections, painting, testing and commissioning etc. as required.

i 2 x 1.5 sq.mm 50 Meterii 2 x 4 sq.mm 60 Meter

7

Wiring for twin light point with 1.5 sq.mm 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe with 2 way 6 ampere switch including connections, painting, testing and commissioning etc. as required


BILL OF QUANTITIES

Name of work :- Construction of Four Storeyed Residential Building having 2 Bed Room Units - (Category IV) at Phuentsholing (ONE BUILDING)

(Sub Head : Internal Electrification, Telephone & Television Works)

POINT WIRING

Rate (Nu.)

of 5


In Figure In Words

Rate (Nu.)

B

1 Supplying of the following light fixtures suitable for the ceiling and wall with all accessories etc. as required but without lamp.

i

Supplying of prewired indoor fluoresent lamp luminiaries housing of CRCA sheet steel rail, end with lamp holders, copper wound ballast, starter, starter holder, terminal block etc. but without lamp, HPF suitable for wall and ceiling directly or pendant

a) Strip Rail 1x36/40 watt 32 Each

ii)Supplying of ceiling fan 240 volt A.C 1400 rpm with all accessories such as down rod, sweep 3 Nos.,canopy 2 Nos., condenser and fan body etc. complete as required

a) 1200mm sweep 24 Each

iii) Supplying of prewired call bell 250 volt A.C with base, terminal block and all accessories complete

a) Musical bell assembly 8 EachSupplying of exhaust fan 230 volt A.C 900 rpm with all accessories such as frame with arm 3 Nos.,sweep 3 Nos., condenser and fan body etc. complete as required with bird guard

2 300mm sweep 8 Each

C

1 Suplying of lamps 230 volts A.C for the above luminariesi) GLS lamp 60 watt (BC) 68 Each

ii) TL lamp 36/40 watt 32 Each

D

1

Installation, testing and commissioning of fluroscent fitting of all surface type complete with all accessories and tube directly on ceiling or wall as required including connection with PVC insulated copper conductor.

i 1.5sq.mm single core cable 1.1kV grade. 32 Each

2

Erection of all indoor/outdoor surface type wall bracket (single or double)/ surface ceiling fittings CFL lamps/ bulk head GLS lamp / all types call bell & all type picture or mirror lighting luminiaries fittings with all accessories, fixing of lamp, testing etc. as required including connection with PVC insulated copper conductor

i 1.5 sq.mm single core cable 1.1 KV grade 76 Each

3Installation, testing and commissioning of all size ceiling fan and regulator including wiring the down rod of standard length upto 300 mm with PVC insulated copper conductor

i 1.5 sq.mm single core cable 1.1 KV grade 24 Each

E

1Supply of SPN distribution board (DIN type,horizontal) with metal door, 230 volt A.C complete with all accessories without MCB/isolator/RCCB out going or incoming etc. as required.

i 12 Ways 8 Each

2

Installation, testing and commissioning of SPN DB (DIN type, horizontal/vertical) with metal door (double/single door) complete with all accessories to accommodate incoming RCCB FP 40/63A sensitivity 30/100/300mA and outgoing SP MCB 6/10/16A on/in prefabricated MS surface /MS cubical control panel board including drilling holes, connections etc. as required

i 12 Ways 8 Each

3Providing of RCCB, two pole, 230 volts A.C, 100mA sensitivity in distribution board complete with all accessories suitable to fix on a din bar etc. as required

i RCCB-2P; 63 A 8 Each

4 Installation, testing and commissioning of two pole RCCB, 100mA sensitivity complete with all accessories, etc.as required.

SUPPLYING OF LAMPS

ERECTION AND INSTALLATION of FITTINGS & LAMPS

SUPPLYING OF FITTINGS

SUPPLY & INSTALLATION OF CONTROL GEARS

of 5


In Figure In Words

Rate (Nu.)

i RCCB-2P; 63 A 8 Each

5Providing of Miniature Circuit Breaker [MCB] single pole, 230 volts A.C in distribution board complete with all accessories suitable to fix on a din bar etc. as required

i MCB -SP; 6A 16 Each

ii MCB -SP; 16A 56 Each

6

Installation, testing and commissioning of SPN Miniature Circuit Breaker [MCB] DIN type, complete with all accessories to accommodate in a distribution board including drilligng holes, connections, etc.as required.



7Providing of Miniature Circuit Breaker [MCB] double pole, 230 volts A.C in main control board / distribution board complete with all accessories suitable to fix on a din bar etc. as required

i 63 Ampere 8 Each

8

Installation, testing and commissioning of DP Miniature Circuit Breaker [MCB] DIN type, complete with all accessories to accommodate in a main control board / distribution board including drilling holes, connections, etc.as required.

i 63 Ampere 8 Each

9Supplying of panel moulded case circuit breaker (MCCB) with electronic release, breaking capacity 36KA, 4 pole 415 volt A.C complete with all accessories etc. as required

i 160A, 415V 1 Each

10

Installation, testing and commissioning of four pole moulded case circuit breaker (DIN type) breaking capacity 36/70K/earthleakage module complete with all accessories to accommodate on/in as required

i 160A, 415V 1 Each

11Supplying of Aluminium alloy/wrought aluminium busbar complete with all accessories etc. to accomodate in prefabricated MS cubical panel board as required

i) 4 strips, 600mm bar, 300A 1 Each

12

Installation, testing & commissioning of aluminium alloy/wrought aluminium bus bar complete with all accessories accessories to accomodate in prefabricated MS cubical control panel board includingconnections etc. as required


13

Providing & fixing of prefabricated panel board with minimum 50x50x6mm angle iron frame work with horizontal and vertical intermidiate members of flat iron 40x6mm and 24 SWG sheet cover for mountingof switch gears incoming/ outgoing bus bars including drilling holes, insulator, painting,denting, grouting etc. as required

i) Floor mounted cubical control panel board of welded construction

1 Each

14

Providing and fixing medium volt danger notice plate made of mild steel and painted with vitreous enamelled white paint on both sides, and with inscription in signal red colour on front side as required on prefabricated MS surface/ MS cubical control panel board on surface including drilling holes etc. as required

i) 200x150x2mm 1 Each

F

1 Supplying of four core 1.1kV grade PVC insulated and sheathed aluminium conductor armoured power cables.

i 4 core, 70 sq.mm (BPC to MCPB) 50 Meter

POWER CABLE SUPPLY & COMPRESSION GLAND

of 5


In Figure In Words

Rate (Nu.)

2Wiring for sub-main with 1.1kV grade, PVC insulated copper conductor cable in recessed HDPE pipe 32mm dia including connections, painting, testing and commissioning etc. as required

i 2 core, 16 sq.mm (MCPB to Distribution board) 170 Meter

3

Laying of one number PVC insulated and sheathed power cable copper/aluminium,armoured/un-armoured 1.1KV single core to four core, in HDPE pipe/direct in the ground including excavation, sand cushing, protective covering and refilling the trenches etc., including thimble and sockets, as required

i Above 6 sq.mm to 25 sq.mm 170 Meter

ii Above 70sq.mm to 150sq.mm 50 Meter

4Supplying of heavy duty brass single compression gland for 4 Core 1.1KV grade PVC insulated and sheathed Copper/ Aluminium conductor armoured/ un-armoured power cables

i 35mm dia, 50sq.mm 2 Nos.

5

Installation, Testing and Commissioning of end termination with single/double compresion gland for PVC insulated and sheathed aluminium/ copper conductor cable of 1.1KV grade including connections etc. as required

i 35/38/40mm dia 2 Nos.

6

Supplying of heavy duty brass single compression gland for 2- Core 1.1KV grade PVC insulated andsheathed Copper/ Aluminium conductor armoured/ un-armoured power cables

i 29mm dia, 25sq.mm 8 Nos.

7

Installation, Testing and Commissioning of end termination with single/double compresion gland forPVC insulated and sheathed aluminium/ copper conductor cable of 1.1KV grade including connectionsetc. as required

i 27/29/33mm dia 8 Nos.

G

1Supplying and fixing of telephone sockets outlet on the wall including necessary cutting, connection and testing etc. as required.

i RJ - 11 telephone sockets 8 Each

2Supplying and drawing of telephone wire 0.5 sq.mm PVC insulated copper conductor cable to respective telephone point in existing recessed HDPE pipe

i 2 pairs 200 Meter

3Supplying and fixing of HDPE pipe for telephone point including all accessories such as screws, bends,elbows,tees,corners etc. as required.

i 25mm dia. 190 Meter

4

Supplying & installation of standard Telephone Terminal Cabinet (TTC-8 ways) dust & vermin proof with punch holes to all the four sizes along with connection and assembly complete in all respect.

1 Each

H

1Supplying & fixing of t.v socket outlet on the wall including necessary cutting,connection testing etc. as required as per the drawing.

i TV coaxial socket outlet 16 Each

2Supplying and drawing coaxial cable in existing recessed HDPE pipe including necessary cutting, connection, testing etc. as required

i RG-6 250 Meter

3Supplying and fixing of HDPE pipe for television point including all accessories such as screws, bends,elbows,tees,corners etc. as required.

i 25 mm dia. 240 Meter

TELEPHONE NETWORKS

TELEVISION NETWORKS

of 5


In Figure In Words

Rate (Nu.)

4 Supplying & installation of standard Television Line Splitter (TV-DB 10 ways) with connection and assembly complete. 1 Each

I

1

Supplying and fixing of earthing including all accessories, machinery enclosure, C.I cover plate having lock arrangement, watering pipe with excavation and refilling work including charcoal or coke and salt complete as required as per standard earthing drawing.

i With copper plate 600x600x3mm 2 Each

2Providing and laying of earth connection from earth electrodes to main control panel board and distribution board as required as per standard earthing drawing.

i With 4.06mm dia. copper wire (8 SWG) 50 Meter

J

1Supplying and laying of HDPE pipe pressure class 10Kg/sq.cm for Distribution board lines below the trench /for main control board in drain crossing complete as required.

i 32 mm dia for Telephone/Television Service Lines 10 Meter

ii 50 mm dia. Earthing Substaion 10 Meter

iii 75 mm dia. For main control board service line 5 Meter

iv Providing & Installation of Single Phase Energy Meters 8 Each

Grand Total Amount…………………………………………………………………(Nu.)

FOUR BUILDINGS….…………...………………………………...Total Amount (Nu.)

Rebate If Any…………………….………………………………………………………

ONE BUILDING…………………………….…………………...Total Amount (Nu.)

EARTHING

MISCELLANEOUS ITEMS

Sl.

No.Description of the items Qty. Unit Amount (Nu.)

In Figure In Words

A. POINT WIRING

1

Wiring for light, call bell and 2 pin light socket outlet

with 1.5 sq.mm 1.1kV grade, PVC insulated copper

conductor cable in recessed HDPE pipe including

connections, painting, testing and commissioning etc. as

required

i Short point 4 Point

ii Medium point 72 Point

iii Long point 48 Point

2

Wiring for ceiling fans with 1.5 sq.mm 1.1kV grade,

PVC insulated copper conductor cable in recessed

HDPE pipe with fan regulator including connections,

painting, testing and commissioning etc. as required

i Medium point 8 Point

ii Long point 16 Point

3

Wiring for lighting circuit with 1.1kV grade, PVC

insulated copper conductor cable in recessed HDPE pipe

including connections, painting, testing and

commissioning etc. as required

i 2x2.5sq.mm 200 Meter

4

Wiring for 3 pin, 16 Ampere plug point with 4 sq.mm

1.1kV grade, PVC insulated copper conductor cable and

bare copper wire of 2.5 mm dia. in recessed HDPE

pipe with providing and fixing 3 pin, 16 ampere socket

outlet and switch including earthing third pin and


required




5

Wiring for 3/5 pin, 6 Ampere plug point with 2.5 sq.mm

1.1kV grade, PVC insulated copper conductor cable and

bare copper earth continuity wire of 2.5 mm dia. in

recessed HDPE pipe with providing and fixing 3/5 pin, 6

ampere socket outlet and switch including earthing the

third pin, connections, painting, testing and





6

Wiring for points in excess length above long points

with 1.1kV grade, PVC insulated copper conductor

cable in recessed HDPE pipe including bare copper wire

2.5 sq.mm for earth continuity along with power point,


required.

i 2 x 1.5 sq.mm 50 Meter

ii 2 x 4 sq.mm 60 Meter

7

Wiring for twin light point with 1.5 sq.mm 1.1kV grade,

PVC insulated copper conductor cable in recessed

HDPE pipe with 2 way 6 ampere switch including


required




BILL OF QUANTITIES

Name of work :- Construction of Four Storied Residential Building having 2 Bed Room Units - (Category III) at Phuentsholing (One

Building)

(Sub Head : Internal Electrification, Telephone And Television Works)

Rate (Nu.)

Page 1 of 8

Sl.


In Figure In Words

Rate (Nu.)

B SUPPLYING OF FITTINGS

1

Supplying of the following light fixtures suitable for the

ceiling and wall with all accessories etc. as required but

without lamp.

i

Supplying of prewired indoor fluoresent lamp

luminiaries housing of CRCA sheet steel rail, end with

lamp holders, copper wound ballast, starter, starter

holder, terminal block etc. but without lamp, HPF

suitable for wall and ceiling directly or pendant

a) Strip Rail 1x36/40 watt 32 Each

ii)

Supplying of ceiling fan 240 volt A.C 1400 rpm with all

accessories such as down rod, sweep 3 Nos.,canopy 2

Nos., condenser and fan body etc. complete as required


iii)Supplying of prewired call bell 250 volt A.C with base,

terminal block and all accessories complete

a) Musical bell assembly 8 Each

iv

Supplying of exhaust fan 230 volt A.C 900 rpm with all

accessories such as frame with arm 3 Nos.,

sweep 3 Nos., condenser and fan body etc. complete as

required with bird guard


C SUPPLYING OF LAMPS

1Suplying of lamps 230 volts A.C for the above

luminaries

i) GLS lamp 60 watt (BC) 84 Each

ii) TL lamp 36/40 watt 32 Each

D ERECTION AND INSTALLATION of FITTINGS & LAMPS

1

Installation, testing and commissioning of fluroscent

fitting of all surface type complete with all accessories

and tube directly on ceiling or wall as required including

connection with PVC insulated copper conductor.

i) 1.5sq.mm single core cable 1.1kV grade. 32 Each

2

Erection of all indoor/outdoor surface type wall bracket

(single or double)/ surface ceiling fittings CFL lamps/

bulk head GLS lamp / all types call bell & all type

picture or mirror lighting luminiaries fittings with all

accessories, fixing of lamp, testing etc. as required

including connection with PVC insulated copper

conductor

i) 1.5 sq.mm single core cable 1.1 KV grade 92 Each

3

Installation, testing and commissioning of all size ceiling

fan and regulator including wiring the down rod of

standard length upto 300 mm with PVC insulated copper

conductor

i) 1.5 sq.mm single core cable 1.1 KV grade 24 Each

E SUPPLY & INSTALLATION OF CONTROL GEARS

1

Supply of SPN distribution board (DIN type,horizontal)

with metal door, 230 volt A.C complete with all

accessories without MCB/isolator/RCCB out going or

incoming etc. as required.

i 12 Ways 8 Each

Page 2 of 8

Sl.


In Figure In Words

Rate (Nu.)

2

Installation, testing and commissioning of SPN DB (DIN

type, horizontal/vertical) with metal door (double/single

door) complete with all accessories to accommodate

incoming RCCB FP 40/63A sensitivity 30/100/300mA

and outgoing SP MCB 6/10/16A on/in prefabricated MS

surface /MS cubical control panel board including

drilling holes, connections etc. as required

i) 12 Ways 8 Each

3

Providing of RCCB, two pole, 230 volts A.C, 100mA

sensitivity in distribution board complete with all

accessories suitable to fix on a din bar etc. as required

i) RCCB-2P; 63 A 8 Each

4

Installation, testing and commissioning of two pole

RCCB, 100mA sensitivity complete with all accessories,

etc.as required.

i) RCCB-2P; 63 A 8 Each

5

Providing of Miniature Circuit Breaker [MCB] single

pole, 230 volts A.C in distribution board complete with

all accessories suitable to fix on a din bar etc. as

required



6

Installation, testing and commissioning of SPN

Miniature Circuit Breaker [MCB] DIN type, complete

with all accessories to accommodate in a distribution

board including drilligng holes, connections, etc.as

required.

i) MCB -SP; 6A 16 Each

ii) MCB -SP; 16A 72 Each

7

Providing of Miniature Circuit Breaker [MCB] double

pole, 230 volts A.C in main control board / distribution

board complete with all accessories suitable to fix on a

din bar etc. as required

i) 63 Ampere 8 Each

8

Installation, testing and commissioning of DP Miniature

Circuit Breaker [MCB] DIN type, complete with all

accessories to accommodate in a main control board /

distribution board including drilling holes, connections,

etc.as required.

i) 63 Ampere 8 Each

9

Supplying of panel moulded case circuit breaker

(MCCB) with electronic release, breaking capacity

36KA, 4 pole 415 volt A.C complete with all

accessories etc. as required

i) 250 Ampere 1 Each

10

Installation, testing and commissioning of four pole

moulded case circuit breaker (DIN type) breaking

capacity 36/70K/earthleakage module complete with all

accessories to accommodate on/in as required

i) 250A, 415V 1 Each

11

Supplying of Aluminium alloy/wrought aluminium

busbar complete with all accessories etc. to accomodate

in prefabricated MS cubical panel board as required


12

Installation, testing & commissioning of aluminium

alloy/wrought aluminium bus bar complete with

all accessories accessories to accomodate in

prefabricated MS cubical control panel board including

connections etc. as required


Page 3 of 8

Sl.


In Figure In Words

Rate (Nu.)

13

Providing & fixing of prefabricated panel board with

minimum 50x50x6mm angle iron frame work

with horizontal and vertical intermidiate members of flat

iron 40x6mm and 24 SWG sheet cover for

mountingof switch gears incoming/ outgoing bus bars

including drilling holes, insulator, painting,

denting, grouting etc. as required

i)Floor mounted cubical control panel board of welded

construction1 Each

14

Providing and fixing medium volt danger notice plate

made of mild steel and painted with vitreous

enamelled white paint on both sides, and with inscription

in signal red colour on front side as

required on prefabricated MS surface/ MS cubical

control panel board on surface including drilling

holes etc. as required

i) 200x150x2mm 1 Each

F POWER CABLE SUPPLY & COMPRESSION GLAND

1Supplying of four core 1.1kV grade PVC insulated and

sheathed aluminium conductor armoured power cables.

i 4 core, 95 sq.mm (BPC to MCPB) 50 Meter

2

Wiring for sub-main with 1.1kV grade, PVC insulated

copper conductor cable in recessed HDPE pipe 32mm

dia including connections, painting, testing and


i 2 core, 16 sq.mm (MCPB to Distribution board) 170 Meter

3

Laying of one number PVC insulated and sheathed

power cable copper/aluminium,armoured/un-armoured

1.1KV single core to four core, in HDPE pipe/direct in

the ground including excavation, sand cushing,

protective covering and refilling the trenches etc.,

including thimble and sockets, as required

i) Above 6 sq.mm to 25 sq.mm 170 Meter

ii) Above 70sq.mm to 150sq.mm 50 Meter

4

Supplying of heavy duty brass single compression gland

for 4 Core 1.1KV grade PVC insulated and sheathed

Copper/ Aluminium conductor armoured/ un-armoured

power cables

i) 35mm dia, 50sq.mm 2 Nos.

5

Installation, Testing and Commissioning of end

termination with single/double compresion gland for

PVC insulated and sheathed aluminium/ copper

conductor cable of 1.1KV grade including connections

etc. as required

i) 35/38/40mm dia 2 Nos.

6

Supplying of heavy duty brass single compression gland

for 2- Core 1.1KV grade PVC insulated and

sheathed Copper/ Aluminium conductor armoured/ un-

armoured power cables

i) 29mm dia, 25sq.mm 8 Nos.

7


termination with single/double compresion gland for

PVC insulated and sheathed aluminium/ copper

conductor cable of 1.1KV grade including connections

etc. as required

i) 27/29/33mm dia 8 Nos.

G TELEPHONE NETWORKS

1

Supplying and fixing of telephone sockets outlet on the

wall including necessary cutting, connection and testing

etc. as required.

i) RJ - 11 telephone sockets 8 Each

Page 4 of 8

Sl.


In Figure In Words

Rate (Nu.)

2

Supplying and drawing of telephone wire 0.5 sq.mm

PVC insulated copper conductor cable to respective

telephone point in existing recessed HDPE pipe

i) 2 pairs 200 Meter

3

Supplying and fixing of HDPE pipe for telephone point

including all accessories such as screws,

bends,elbows,tees,corners etc. as required.

i) 25mm dia. 190 Meter

4

Supplying & installation of standard Telephone Terminal

Cabinet (TTC-8 ways) dust & vermin proof with punch

holes to all the four sizes along with connection and

assembly complete in all respect.

1 Each

H TELEVISION NETWORKS

1

Supplying & fixing of t.v socket outlet on the wall

including necessary cutting,connection testing etc. as

required as per the drawing.

i) TV coaxial socket outlet 16 Each

2

Supplying and drawing coaxial cable in existing recessed

HDPE pipe including necessary cutting, connection,

testing etc. as required

i) RG-6 250 Meter

3

Supplying and fixing of HDPE pipe for television point

including all accessories such as screws,

bends,elbows,tees,corners etc. as required.

i) 25 mm dia. 240 Meter

4

Supplying & installation of standard Television Line

Splitter (TV-DB 10 ways) with connection and assembly

complete.

1 Each

I EARTHING

1

Supplying and fixing of earthing including all

accessories, machinery enclosure, C.I cover plate having

lock arrangement, watering pipe with excavation and

refilling work including charcoal or coke and salt

complete as required as per standard earthing drawing.

i) With copper plate 600x600x3mm 2 Each

2

Providing and laying of earth connection from earth

electrodes to main control panel board and distribution

board as required as per standard earthing drawing.

i) With 4.06mm dia. copper wire (8 SWG) 50 Meter

J MISCELLANEOUS ITEMS

1

Supplying and laying of HDPE pipe pressure class

10Kg/sq.cm for Distribution board lines below the

trench /for main control board in drain crossing complete

as required.

i) 32 mm dia for Telephone/Television Service Lines 10 Meter

ii) 50 mm dia. Earthing Substaion 10 Meter

iii) 110 mm dia. For main control board service line 5 Meter

iv) Providing & Installation of Single Phase Energy Meters 8 Each

Page 5 of 8

Sl.


In Figure In Words

Rate (Nu.)

K

1

Supplying of 4 core, 240 sq.mm PVC insulated and PVC

sheathed aluminium conductor armoured under ground

power cable, 1.1KV grade

200.00 mtrs.

2

Laying of one number of 240 sq.mm PVC insulated and

sheathed power cable copper/aluminium, armoured / un-

armoured 1.1KV single core to four core direct in the

ground at 0.75 metre below the ground level including

excavation, sand cushing, protective covering and

refilling the trenches etc. complete as required and as per

BSB specifications.

200.00 mtrs.

3

Providing and fixing of mini feeder pillar with fabricated

with 14SWG MS sheet and MS angle of appropriate

size including providing & fixing of busbars as per the

detail drawings and specifications to complete the job as

required whether mentioned or not.

2.00 set

4

Construction of foundation for mini pillar including earth

excavation and refilling, soling, reinforcement,

concreting, form works as per the detail drawings and

specifications to complete the job as required whether

mentioned or not.

2.00 set

5

Supplying of heavy duty brass double compression gland

for 4 core 1.1KV grade PVC insulated and sheathed

Copper/ Aluminium conductor armoured power cables ‐

63 mm dia, 240 sq.mm

4.00 each

6


termination with 63 mm dia single/double compresion

gland for PVC insulated and sheathed aluminium/

copper conductor cable of 1.1KV grade including

connections etc. as required

4.00 each

7

Supplying of moulded case circuit breaker (MCCB)

with Thermal Magnetic Release, breaking capacity 36

KA, 4 pole, 400 Amps, 415 volt A.C complete with all

accessories etc. as required, cat no. 4220 07, to mount in

the mini feeder pillar as per the detail drawing to

complete the job as required whether mentioned or not.

(Legrand make)

2.00 set

8

Supplying and fixing of spreaders incoming and

outgoing, 4 P 400 A, 415 volts, cat no. 6250 08

(Legrand make)

2.00 set

9

Installation, testing and commissioning of four pole

moulded case circuit breaker (DIN type) breaking

capacity 36KA/earth leakage module,400 Amps,415 volt

A.C, complete with all accessories to accommodate

on/in prefabricated mini feeder pillar as per the detail

drawing including drilling holes, connections etc

complete as required whether mentioned or not and as

per the specification.

2.00 set

10

Providing and installation of G.I earth spike, 1.8 m

earthing for mini feeder pillar including connections

with 8SWG G.I. wire from spike to mini pillar, testing

etc. complete as required including excavation and

refilling to complete the job as required whether

mentioned or not and as per the BSB specification.

2.00 set

MINI FEEDER PILLAR

One Building…………...Total Amount (Nu.)………………………………………………………...…..(A)

Four Buildings………..Total Amount(Nu.)………………..………………………………………….….(B)

Rebate If Any……………………………………………………………………………………………………

Total Amount after Rebate……………………………………………………………………………………..

Page 6 of 8

Sl.


In Figure In Words

Rate (Nu.)

L

1

Supplly of decorative oriental design landscape

luminaries suitable for 1x26W retro CFL with opel

diffuser (POLARIS), Cat. No. LHLC41126099, Havells

make.

17.00 each

2

Erection of post lamp fixtures including wiring with

PVC insulated copper conductor cable 1.1K.V.grade

2x2.5Sq.mm through the existing pole from junction box

including erection of post top lamp fixture, lamps

connection testing etc complete as required.

17.00 each

3

Supplying of street light/compound light MS tubular pole

50mm outer dia, 4m length having a base plate

250x250x5.4mm thick, entry hole of 40mm dia 1.1m

from bottom and strude bolt as earth terminal complete

as required.

17.00 each

4

Erection of steel tubular pole 4m length with 40mm dia

MS sleeve as inlet of power cable in cement concrete

1:3:6, 40mm stone aggregate foundation with cement

concrete base 0.47mx0.47mx75mm thick 1:4:8 including

excavation, centering & shuttering, and refilling,

providing props for pole etc. complete as required as per

drawing.

4.1 At dead end. 5.00 each

4.2 At middle 9.00 each

4.3 Junction of three way 3.00 each

5

Supplying and errection of junction box fabricated with

14SWG MS sheet, removal cover plate with gasket for

dust and vermine proof, 2 earthing terminals with nut,

bolts and spring washer, 2 entry holes 16mm dia at

bottom, 32mm dia for cable entry at back , including 2

way terminal block & provision to mount SP MCB 6A,

1 no. with locking arrangement and finish coat painting

complete with all accessories as required as per standard

drawing. (MS Junction Box Outdoor duty)

5.1 MS junction box out door duty 17.00 each

6

Providing of 32 mm dia HDPE pipe for inlet and outlet

of power cable of size 2C 10/16 sq mm in existing

trench to complete the job as required. (Druk

pipe/Rabten pipe)

6.1 32 mm dia HDPE pipe 100.00 mtrs.

7

Supplying of 2- Core 1.1KV grade PVC insulated and

sheathed Aluminium conductor armoured power cables.

(Havells/RR Kabel/Richa)

7.1 2 core 10 sq mm 200.00 mtrs.

7.2 2 core 16 sq mm 150.00 mtrs.

7.3 2 core 25 sq mm 25.00 mtrs.

8

Laying of one number above 6 sq.mm to 25 sq.mm PVC

insulated and sheathed power cable aluminium,armoured

1.1KV single core to four core direct in the ground

including excavation, sand cushing, protective covering

(bricks) and refilling the trenches etc. as required as per

cable trenching drawing attached

375.00 mtrs.

COMPOUND LIGHTING

Page 7 of 8

Sl.


In Figure In Words

Rate (Nu.)

9

Providing and fixing of control box fabricated with 14

SWG MS sheet and angle of appropriate size and along

with providing and fixing of busbar 2 strips 600 mm bar

aluminium alloy,100 Amps and provision to mount timer

switch 1 no. ,MCB DP 32 amps 2 set, 230 volt,

contactor double pole 25 Amps and to mount single

phase energymeter,,etc . including drilling holes,

insulator, denting, grouting etc as required to complete

the job whether mentioned or not as per single line

diagram and specifications complete as required to

complete the job.

1.00 set

10

Construction of foundation for control box including

earth excavation and refilling, soling, reinforcement,

concreting, form works as per the size of the control

box.

1.00 set

11

Providing, testing & installation of Alpharex digital

time switches -Astro timer switch assembly in a case

complete with all accessories to accommodate on

prefabricated minipillar, including drilling hole,

connection etc. complete as required to complete the

job.cat ref AlphaREx D21 astro 4126 54 (Legrand)

1.00 each

12

Providing and fixing of double pole power contactor 25

Amps in the prefabricated minipillar as per the detail

drawing provided to complete the job as required.cat ref-

4125 44 (Legrand).

2.00 each

13Providing & Installation of single phase energy meter

from Bhutan Power Corporation.1.00 each

14

Supplying & installation of miniature circuit breaker

(MCB), C-series, double pole, 230V AC complete with

all accessories suitable to fix on din-bar etc. as required.

(Legrand/Havells/Hager).

14.1 DP 32 A 2.00 each

14.2 DP 63 A 1.00 each

15

Supplying & installation of miniature circuit breaker

(MCB), C-series, 6A single pole, 230V AC complete

with all accessories suitable to fix on din-bar etc. as

required. (Legrand/Havells/Hager).

18.00 each

16

Providing and installation of street/compound light pole

earthing including connections, testing etc. complete as

required including excavation and refilling to complete

the job as required whether mentioned.

16.1 With G.I earth spike 1.8 m 18.00 each

17

Supplying of normal retrofit CFL lamp 27 watt, Lumen

output 1800 lumens, colour code 2700k, Havells make

suitable to fit in above light fitting.

17.00 each

Total Amount of K+L (Nu.)………………………………………………….…….…….………………..(C)

One Building…………...Total Amount (Nu.)………………………………………………………...…..(A)

Four Buildings………..Total Amount(Nu.)………………………………………………...………….….(B)

Rebate If Any………………………………………….…….………………………………………………(D)

Grand Total Amount…………………………………….………...……………………………(B) + {C} - {D}

Page 8 of 8

bill of quantities (civil works) - package 4 · bill of quantities (civil works) - package 4 page 1...

Documents