bildanalys and vision
DESCRIPTION
Information and Product newsTRANSCRIPT
INFORMATION AND PRODUCT NEWS
imaging & vision
– New supplier!Thermal imaging for automation
HD-THEME Focus on new HD-productsFocus on new HD-products
2 | www.oemautomatic.se
In this edition of our new
magazine, Imaging & Vision,
we are pleased to announce
a new supplier.
Product area Imaging & Vision expands our portfolio even further, by offering industrial infrared or thermal cameras from one of the leading suppliers, FLIR.
OEM AUTOMATIC NOW DISTRIBUTES the entire range of FLIR automation cameras for fixed installations. The cameras, which are suitable for automation and advanced monitoring of temperature, are easily con-nected via GigE Vision to PC or directly to a controller/monitor. FLIR’s products make it possible for you as a customer, to find new applications within areas not previously solvable with standard cameras.
AS YOU PROBABLY ALREADY have realized, in this edition of Imaging & Vision, we have gone from Swedish to English as the standard language for our news
magazine. The reasons for this are several, in addition to that we supply components in all of Scandinavia, it becomes more common with English speaking staff at many companies.
WE WELCOME YOUR FEEDBACK, whether it concerns our new magazine or our product range. Your feedback is important to us in our endeavor to offer our customers a good service and the most complete product range as possible.
In the next issue, scheduled for early next year, we will present the news our suppliers launched at the Vision Show in Stuttgart in early November.
Until then, we wish you the best for the rest of 2010!
Enjoy your reading!
Torbjörn Fjorde, Product line manager
A new supplier and a change of language
Publisher : Mikael Thörnkvist
Editor: Torbjörn Fjorde
Graphical design & production: CCJ Kommunikation AB, Huskvarna
Printer: Fyra Punkter AB, Värnamo
Contact: OEM Automatic AB Box 1011, Dalagatan 4 573 28 Tranås, Sweden
Tel +46 (0)75-242 41 00Fax +46 (0)75-242 41 19
www.oemautomatic.se | 3
ADVANCED ILLUMINATION
Wave length (nm) EL 138 AL 143 RL 127 SL 147
UV (395) X √ X √
Blue (470) √ √ X √
Green (530) √ √ X √
Amber (590) √ √ X √
Red (625) √ √ X √
Infrared (850) X √ X √
White (WHI) √ √ √ √
Available wave lengths Shining news from Advanced Illumination
4 EL138 – Expandable, high intensity
strip back light
• Passively cooled design• Perfect for line scanning applications• 70000 Lux @ 10 cm• Intensity control of entire light via 10–0v input• Expandable up to 2400 mm
1 SL147 – High brightness LED spot light
• Replaces the SL6404• High intensity illumination from a long distance• Compact design includes passive thermal management and a convenient M4 nut channel for mounting
2 RL127 – High brightness, white
LED ring light
• Intense illumination in a compact housing• IP65 compliant design• Axial light source designed for inspecting non-specular objects
3 AL143 – High brightness area light
• Replaces the AL084• Illumination for long working distances or large area applications• Space saving design features passive thermal manage- ment and a convenient M4 nut mounting channel
1
3
2
4
4 | www.oemautomatic.se
A NEW SUPPLIER!
www.oemautomatic.se | 5
In all industries
the possibility
to automatically ensure quality
and to prevent and detect fires
is of vital importance. The solution
can be a fixed infrared camera
that monitors your process or
asset continuously, detecting
minute temperature differences
in a 24/7 manner.
This methodology has been implemented in a wide range of industrial automation applications all around the world. Many in- dustries can take advantage of implementing
an infrared camera that continuously monitors the production.
THE AUTOMOTIVE INDUSTRYIn the Automotive industry there is a multi-tude of production processes that involves heat or heat patterns generation that needs to be monitored and quality checked. Typical methods are welding, gluing with pre-heated glue, thermoforming, molding and die casting.
PCB CHECKINGAnother application where infrared cameras can be used is PCB checking where anomalies in the thermal patterns can be detected if the PCB is powered up after the final assembly. This type of testing is mostly important for industries dealing with high reliability electronics or power electronics
where anomalies can indicate a case of a possible early failure.
MANUFACTURING INDUSTRIESManufacturing industries, refineries and many others worldwide use infrared ca-meras to locate problems or to detect hot spots and other problems before they turn into costly failures and production down-time or dangerous electrical fires.
FLIR
Market leader in thermal imagingThermal cameras for industrial automation
6 | www.oemautomatic.se
SONY P/T/Z HD
Enhance your remote presence experience with HD
Part number
1080p/59, 941080p/50
1080i/59, 941080i/50
1080p/29, 971080p/25
720p/59, 94720p/50
720p/29, 97720p/25
640x480p/59, 94 SD
EVI-HD1 √ √ √ √ √ √ X
EVI-HD3V X X X √ √ √ X
EVI-HD7V X √ √ √ √ X √
Two newHD roboticcameras
Sony, the world’s
leading robotic camera manu-
facturer, is expanding.
Its HD Pan/Tilt/Zoom (P/T/Z) camera lineup with two new HD robotic came-ras ideally suited for videoconferencing, distance learning, corporate training, and courtrooms. Whether you need standard definition, 720p, 1080i, or 1080p for your
application, there is a Sony P/T/Z HD camera to capture your true-to-life images.
• 10x optical zoom• RS-232C remote control (VISCA™ Protocol)• Six position presets
HD-THEME
www.oemautomatic.se | 7
Industrial GigE or CameraLink camera– With high-speed HD resolution
BASLER AVIATOR
SONY FCB
The Basler aviator family is a series of high
speed mainstream CCD cameras. Superior image quality, even
at high image capture rates, makes a convincing argument for
this advanced camera family.
Part number Sensor size Optical size Max. frame
rate Mono/color Interface
AVA1900-60KM 1920x1080 2/3” 62 fps •/° CameraLink
AVA1900-60KC 1920x1080 2/3” 62 fps °/• CameraLink
AVA1900-60GM 1920x1080 2/3” 50 fps* •/°Gigabit
Ethernet
AVA1900-60GC 1920x1080 2/3” 50 fps* °/•Gigabit
Ethernet
*Preliminary
The Basler aviator’s Advantages Include:
• Family members with 1 to 4 megapixel resolution for greater throughput• Basler’s unique tap balancing yields brilliant image quality• A Camera Link interface for fast data transmission• Separate opto-isolated input and output for external devices (e.g., strobe)• More than 25 camera features support easy system integration
New FCB block camera with full HD
The new SONY FCB-EH-4300 is combining excellent picture
quality, multiple video outputs, Day/Night function, and 20 x
optical zoom.
• video output from PAL/NTSC to FULL HD • 200x zoom ratio (20x optical and 10x digital)• superb image quality with SONYs new ExsorTwo megapixel HD CMOS Sensor• temperature readout• picture freeze• motion detection• low power consumtion, less than 4.8W (motors active)
News!
8 | www.oemautomatic.se
CARL ZEISS
ZF-I: Industrial EditionThe Industrial Edition of ZF lenses can be used for machine vision, quality assurance and Close Range Photogrammetry. Both the aperture setting and focus can be locked for these tasks with special screws. The fixing and the stable interior orientation reduce measuring inaccuracies and there is no need to waste time check-ing the settings.
With the SLR lenses, Carl Zeiss is offering
professional image quality for technical
and industrial applications. Carl Zeiss SLR lenses
for industrial applications are key components in
complex production chains. In measuring tasks,
quality assurance and many other applications, they
prove their performance, reliability and high quality.
ZF-IR: Infrared EditionThe Infrared Edition of ZF lenses are suitable for the use with special cameras (IR cameras without a IR blocking filter). For this the ZF-IR lenses use a single layer coating enabling an extended transmission in the near infrared. The ZF-IR lenses are specified up to a wavelength of 1.100 nm.
F-Mount lenses for large sensors
Other Camera MountsBesides the F-mount Carl Zeiss SLR lenses are available for diffe-rent camera mounts such as EF-mount, K-mount as well as M42 screw mount. Both the aperture setting and focus can be locked for these tasks with special screws. The fixing and the stable interior orientation reduce measuring inaccuracies and there is no need to waste time checking the settings.
• high resolution • color purity • robust housing • manual focus and aperture setting • high image definition • very low distortion
35 mm SLR Lenses
HD-THEME
www.oemautomatic.se | 9
Part number Focal length
HF12.5SA-1 12,5 mm
HF16SA-1 16 mm
HF25SA-1 25 mm
HF35SA-1 35 mm
HF50SA-1 50 mm
HF75SA-1 75 mm
All lenses supports sensor sizes from 1/3” up to 2/3”
• High-resolution design, providing support for up to 5 megapixel cameras• Rear focusing system provides improved macro performance • Wide-aperture (F1.4) design achieves clear images under low light intensity• Enhanced image recognition accuracy achieved by reduction of distortion and improvement of illumination uniformity• Robust enclosure resistant to vibrations and chock. Equipped with locking nobs for the iris and the focus.
Machine Vision lenses for high-resolution applications
FUJINON
MATROX IMAGING
Orion HD – Graphics and video capture card with SD/HD capabilities
Matrox Orion HD, a high-performance graphic adapter with video capture capabilities, provides
the ideal solution to the legacy standard definition (SD) and the advanced high definition (HD)
video needs found in many medical, video surveillance and simulation/training applications.
• Two independent video input paths• Each path can connect and switch between: RGB/CVBS (3)/YprPb, DVI-D/HDMI and SDI• Resolution and rates: SD (NTSC/PAL), HD (720p, 1080i and 1080p at up to 60 Hz), PC (up to 1920x1200 @ 60 Hz) and non-standard• Includes colour space converter for obtaining the most accurate colour representation of the original image• Two fully independent video outputs, with support for the same formats as the inputs
10 | www.oemautomatic.se
The Basler aviator is a series of high-speed,
mainstream cameras. The aviator’s superior image quality, even
at high image capture rates, makes a convincing argument.
The Basler aviator is equipped with Kodak’s state-of-the-art CCD sensors. These new cameras combine Basler’s
extensive know-ledge of the GigE inter-face and their long experience designing cameras based on Kodak sensors.
Part number Resolution MaximumFrame rate
AVA1000-100GM/GC 1024x1024 100 fps
AVA1600-50GM/GC 1600x1200 50 fps
AVA1900-50GM/GC 1920x1080 50 fps
AVA2300-25GM/GC 2330x1750 25 fps
All models are also available with CameraLink interface.
News!
BASLER AVIATOR
TECHNICAL FACTS
• 1 to 4 megapixel and up to 120 fps• Brilliant CCD color with 12 bit
image quality • Kodak 4 tap sensor technology
with the best tap balancing• Extremely cost effective for new
designs or system upgrades• GigE Vision interface fa
cts
BASLER AVIATOR Now with GigE interface
The Basler aviator series is an ideal fit for applications such as: – Semiconductor manufacturing
– Electronics manufacturing
– Metrology
– Medical imaging
– Various other applications
www.oemautomatic.se | 11
BASLER ACE
Basler Ace ACA2500 with 5 Mega pixels, a new GigE camera in the Ace family
Did you miss our previous issues? E-mail your address to:
we will send you our previous
issues of Imaging & Vision!
Part number Resolution MaximumFrame rate
ACA640-100GM/GC 640x480 100 fps
ACA750-30GM/GC 752x582Interlaced 30 fps
ACA1300-30GM/GC 1296x966 30 fps
ACA1600-20GM/GC 1628x1236 20 fps
ACA2500-14GM/GC 2592x1944 14 fps
All models are available in either monochrome or color.
TECHNICAL FACTS
• Monochrome or Color• Fast Ethernet (100 Mbits/sec)
or Gigabit Ethernet • 2592x1944 pixels• Frame rate up to 14 frames
per second• 1/2.5” Optical size• Based on Aptina MT9P
CMOS sensor• 42x29x29 mm fa
cts
The Basler ace combines the smallest size, the newest
technology, and the best price for a GigE Vision camera.
This combination makes the ace camera series extremely appealing for use in all standard machine vision applications. The ace is the latest innovation in Basler’s broad GigE camera portfolio and benefits
from our five years of GigE camera ex-perience. This makes the ace series not only a highly innovative design but also a very mature product that guarantees seamless integration into your application.
Special offer, valid until December 31st.3499 SEK/pc(First sample available December/January)
SVERIGE
PORTO BETALTB
#2:08
Northwire Inc – ny kabelleverantör
Nya linescan-kameror i färg!
Scout Light – ny kamera från Basler till kanonpriser!
Previous issues and more informationProduct area Imaging and Vision offer a wide range of components for OEMs, integrators and machine builders, from cameras and optics to customized imaging computers and software.
Product examples, Imaging & Vision: Vision processors, Optics, Framegrabbers, Cameras, Software, Standalone systems, Illumination, Cable systems and Filters.
Our suppliers, Imaging & Vision: Advanced Illumination, Basler, Carl Zeiss, Flir, Fujinon, Kowa, Matrox Imaging, Midwest Optical Systems, Northwest Inc., Schneider, Sony, and Z-Laser.
Contact information Imaging & Vision Tel +46 (0)75-242 41 80Fax +46 (0)75-242 41 89E-mail [email protected]
Visit our website today! [email protected]
No 2 2008 Imaging & Vision
No 1 2009 Imaging & Vision
No 2 2009 Imaging & Vision
No 1 2010 Imaging & Vision
No 1 2009 Imaging & Vision
Produkt Owerview Imaging & Vision
IR Automation guidebook, FLIR
E-mail your address to: [email protected] you want us to send you previous issues of Imaging & Vision or if you want a subscription.