better parts. good prices. alliance truck parts. · q abp 280arrm - blister single 282mm 116mm 28mm...

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

LED LIGHTINGPARTS GUIDE

Better Parts. Good Prices.Alliance Truck Parts.

LED LIGHTING PARTS GUIDE

www.alliancetruckparts.com.au

Alliance LED Lighting

A range of high performance, reliable LED lighting products made to suit small, medium and large vehicle and trailers. Each product has been specially designed to suit harsh Australian road environments to create a reliable products at a competitive price, perfect to enable you to hit the road with confidence.

• Original unique product design

• Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces

• Quality LEDs and associated components

• Products manufactured to exceed ADR/ECE standards

• IP67 dust and waterproof on all external automotive applications

Available Range

Part Number Description Page NumberQ ABP 58RM 10-30V rear marker lamp 4

Q ABP 58AM 10-30V side marker lamp 5

Q ABP 58WM 10-30V front marker lamp 6

Q ABP 58ARM 10-30V side marker lamp 7

Q ABP 280ARRM Stop/Tail/Ind 8

Q ABP 280ARWM 280 Stop/Tail/Ind/Rev 9

Q ABP 275ARM 12-24V Stop/Tail/Ind lamp 10

Q ABP 130RMG 12/24V Stop/Tail/Ind lamp 11

Q ABP 130AMG 12/24V Ind lamp 12

Q ABP 130WMG 12/24V Rev lamp 13

Q ABP 460ARRM 12-24V Stop/Tail/Ind 14

Q ABP 460ARWM 12-24V Stop/Tail/Ind/Rev 15

Q ABP J3BARRM Jumbo Stop/Tail/Ind 16

Q ABP J3BARWM Jumbo Stop/Tail/Ind/Rev 17

Q ABP 35BLM License plate lamp 18

Q ABP 7030R Red reflectors (2pk) 19

Q ABP 7030A Amber reflectors (2pk) 20

Q ABP 7030W White reflectors (2pk) 21

Q ABP 11518FBM 18W square flood beam 22

Q ABP 11618FBM 18W round flood beam 23

Q ABP LR12/2 12V load resistor (2pk) 24

Q ABP LR24/2 24V load resistor (2pk) 25

Q ABP LRB145 LED rotating beacon 26

Warranty

Alliance Truck Parts are backed by a 1-year/unlimited kilometre standard warranty. Illustrations and photographs used in this catalogue may vary slightly from the actual product. Prototype samples are sometimes used for photography. The production parts may vary slightly. Availability of products shown in this catalogue is subject to change without notice.

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

• Original unique product design

• Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces

• Quality LEDs and associated components

• Products manufactured to exceed ADR/ECE standards

• IP67 tested on all automotive applications

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Fitting InstructionsHorizontally mount bracket onto flat surface with screws provided, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.

• New lens design• Low profile• Clip in replaceable lens• IP67 dust & water proof• Australian road approved

Function Rear end outline markerSize 58mm x 35mm x 21mmVoltage Multivolt 12-24VLED Qty 2Cable 40cm cable

Draw @13.8V @28V0.12A 0.04A

Approvals Function Category CRNADR Rear end 49/00 36840

58mm

35mm

28.50mm

21mm

58mm

35mm

28.50mm

21mm

Part NumberQ ABP 58RM - Blister Single

Q ABP 58RM - Marker Lamp

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Part NumberQ ABP 58RM - Blister Single

Q ABP 58RM - Marker Lamp



58mm

35mm

28.50mm

21mm

58mm

35mm

28.50mm

21mm

Function Side direction indicatorSize 58mm x 35mm x 21mmVoltage Multivolt 12-24VLED Qty 2Cable 40cm cable

Draw @13.8V @28V0.10A 0.04A

Approvals Function Category CRNADR Marker 6/00/5 38277

Part NumberQ ABP 58AM - Blister Single

Q ABP 58AM - Marker Lamp

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof



58mm

35mm

28.50mm

21mm

58mm

35mm

28.50mm

21mm

Part NumberQ ABP 58WM - Blister Single

Function Front end outline markerSize 58mm x 35mm x 21mmVoltage Multivolt 12-24VLED Qty 2Cable 40cm cable

Draw @13.8V @28V0.05A 0.03A

Approvals Function Category CRNADR Front 49/00 36842

Q ABP 58WM - Marker Lamp

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof


Q ABP 58ARM - Marker Lamp


58mm

35mm

28.50mm

21mm

58mm

35mm

28.50mm

21mm

Part NumberQ ABP 58ARM - Blister Single

Function Side markerSize 58mm x 35mm x 21mmVoltage Multivolt 12-24VLED Qty 2Cable 40cm cable

Draw @13.8V @28V0.10A 0.04A

Approvals Function Category CRNADR Side 45/01 36841

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

• New design mini jumbo• Includes red reflector*• IP67 dust & water proof• Australian road approved

Fitting InstructionsSurface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00.

Part NumberQ ABP 280ARRM - Blister Single

282mm

116mm

28mm

95mm

* Included in blister packaging

Q ABP 280ARRM - Small Vehicle/Trailer Lamp

Function Stop/Tail/IndicatorSize 282mm x 95mm x 28mmVoltage Multivolt 12-24VLED Qty 36Cable 1.2m

Draw Stop Tail [email protected] 0.30A 0.40A 0.14A@28V 0.22A 0.06A 0.11A

Approvals Function Category CRNADR Stop/Tail 49/00 33059ADR Indicator 6/00/2A 33098

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

• New design mini jumbo• Includes red reflector*• IP67 dust & water proof• Australian road approved

Fitting InstructionsSurface mount onto flat surface horizontally with stainless steel bolts provided in assembly and run cable through 12mm hole. Please refer to ADR 13/00.

Part NumberQ ABP 280ARWM - Blister Single

Function Stop/Tail/Indicator/ReverseSize 282mm x 95mm x 28mmVoltage Multivolt 12-24VLED Qty 36Cable 1.2m

Draw Stop Tail Indicator [email protected] 0.15A 0.02A 0.14A 0.17A@28V 0.11A 0.03A 0.11A 0.13A

Approvals Function Category CRNADR Stop/Tail 49/00 33059ADR Indicator 6/00/2A 33098ADR Reverse 1/00 35797

282mm

116mm

28mm

95mm

* Included in blister packaging

Q ABP 280ARWM - Small Vehicle/Trailer Lamp

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 275ARM - Small Vehicle/Trailer Lamp


• Inbuilt reflectors• Diamond lens pattern• IP67 dust & water proof• Australian road approved

Licence plate lamp input

115mm

100mm

275mm

115mm

22mm

Function Stop/Tail/Indicator/ReflectorSize 275mm x 100mm x 22mmVoltage Multivolt 12-24VLED Qty 16Cable 30cm cable with plug


Approvals Function Category CRNADR Stop/Tail 49/00 38658ADR Indicator 6/00/2A 38657ADR Reflector 47/00 38102

Fitting InstructionsHorizontally mount onto flat surface with Indicator at top using bolts in back of lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof


Q ABP 130RMG - Medium Vehicle/Trailer Lamp

• Designed with rear reflector• Includes grommet and plug• Horizontal or vertical mount• IP67 dust & water proof• Australian road approved

Fitting InstructionsRetro fit lamps. If new installation, fit grommet or flange into cutout (cut out 139 x 91mm), plug wire into lamp and run through back then push into grommet/flange. Please refer to ADR 13/00 for mounting instructions.

Part NumberQ ABP 130RMG - Blister Single

146mm

LAMP GROMMET FLANGE

86mm 113mm 109mm

89mm91mm

24mm24mm 12mm

134mm 139mm 136mm 157mm160mm

48mmFunction Stop/tail with reflectorSize 134mm x 86mm x 16mmVoltage Multivolt 12-24VLED Qty 14Cable Includes 53102

Draw Stop [email protected] 0.23A 0.03A@28V 0.12A 0.04A

Approvals Function Category CRNADR Stop/Tail 49/00 36844ADR Reflector 47/00 38102

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 130AMG - Medium Vehicle/Trailer Lamp


Part NumberQ ABP 130AMG - Blister Single

146mm

LAMP GROMMET FLANGE

86mm 113mm 109mm

89mm91mm

24mm24mm 12mm

134mm 139mm 136mm 157mm160mm

48mmFunction Rear indicatorSize 134mm x 86mm x 16mmVoltage Multivolt 12-24VLED Qty 14Cable Includes 53102

Draw [email protected] 0.20A@28V 0.14A

Approvals Function Category CRNADR Indicator 6/00/2A 36843

• Includes grommet and plug• Horizontal or vertical mount• IP67 dust & water proof• Australian road approved

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Part NumberQ ABP 130AMG - Blister Single

Q ABP 130WMG - Medium Vehicle/Trailer Lamp


Part NumberQ ABP 130WMG - Blister Single

146mm

LAMP GROMMET FLANGE

86mm 113mm 109mm

89mm91mm

24mm24mm 12mm

134mm 139mm 136mm 157mm160mm

48mm

• Includes grommet and plug• Horizontal or vertical mount• IP67 dust & water proof• Australian road approved

Function ReverseSize 134mm x 86mm x 16mmVoltage Multivolt 12-24VLED Qty 32Cable Includes 53102


Approvals Function Category CRNADR Reverse 1/00 36845

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Fitting InstructionsHorizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Part NumberQ ABP 460ARRM - Blister Single

Function Stop/Tail/Indicator/ReflectorSize 460mm x 130mm x 33mmVoltage Multivolt 12-24VLED Qty 48Cable 1.2m


Approvals Function Category CRNECE Stop/Tail 02 R1-S1 11293ECE Indicator 01 2a 6205ECE Reflector 02 1A 1472

• New mid sized Jumbo• IP67 dust & water proof• Australian road approved

460mm

130mm

33mm

280mm

Q ABP 460ARRM - Medium Vehicle/Trailer Lamp ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 460ARWM - Medium Vehicle/Trailer Lamp

Fitting InstructionsHorizontally or vertically mount onto flat surface using bolts in back of lamp, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

Part NumberQ ABP 460ARWM - Blister Single

Function Stop/Tail/Indicator/ Reverse/Reflector

Size 460mm x 130mm x 33mmVoltage Multivolt 12-24VLED Qty 48Cable 1.2m

Draw Stop Tail Ind [email protected] 0.30A 0.02A 0.32A 0.19A@28V 0.17A 0.04A 0.18A 0.12A

Approvals Function Category CRNECE Stop/Tail 02 R1-S1 11293ECE Indicator 01 2a 6205ECE Reverse 00 AR 1208ECE Reflector 02 1A 1472

• New mid sized Jumbo• IP67 dust & water proof• Australian road approved

460mm

130mm

33mm

280mm

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Part NumberQ ABP J3BARRM - Blister Single

Fitting InstructionsHorizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

• Australia’s popular jumbo style• IP67 dust & water proof• Australian road approved

Function Stop/Tail/Indicator/Reflector

Size 595mm x 130mm x 45mmVoltage Multivolt 12-24VLED Qty 72Cable 1.2 meter cable


Approvals Function Category CRNADR Stop/Tail 49/00 42965ADR Indicator 6/00/2A 42964ADR Reflector 47/00 42966

Q ABP J3BARRM - Large Vehicle/Trailer Lamp

Active

595mm

130mm

500mm

45mm

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Part NumberQ ABP J3BARWM - Blister Single

Fitting InstructionsHorizontally or vertically mount using bolts in back of lamp, run wires through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.

• Australia’s popular jumbo style• IP67 dust & water proof• Australian road approved

Q ABP J3BARWM - Large Vehicle/Trailer Lamp

Function Stop/Tail/Indicator/Reverse/Reflector

Size 595mm x 130mm x 45mmVoltage Multivolt 12-24VLED Qty 72Cable 1.2 meter cable

Draw Stop Tail Ind [email protected] 0.47A 0.04A 0.42A 0.18A@28V 0.27A 0.03A 0.28A 0.11A

Approvals Function Category CRNADR Stop/Tail 49/00 42965ADR Indicator 6/00/2A 42964ADR Reverse 1/00 42967ADR Reflector 47/00 42966

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Active

595mm

130mm

500mm

45mm

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 35BLM - Licence Plate Lamp

Part NumberQ ABP 35BLM - Blister Single

Fitting InstructionsFit onto flat surface, 25mm from top centre, long edge of licence plate with lens facing towards the ground. Refer to ADR 13/00 for Fitting Instructions.

• Original Design• IP67 Dust & Water Proof• Australian road approved

Function Licence plate lampSize 76mm x 42mm x 30mmVoltage Multivolt 12-24VLED Qty 4Cable 40cm Cable


Approvals Function Category CRNADR Licence 48/00 36280

42mm

30mm

76mm

64mm

42mm

30mm

76mm

64mm

Active

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

Part NumberQ ABP 35BLM - Blister Single

Q ABP 7030R - Red Reflex Reflector

Fitting InstructionsRemove tape backing and place onto flat surface, apply firm hand pressure to ensure adhesion. Please refer to ADR 13/00 for mounting instructions.

Part NumberQ ABP 7030R - Blister Twin

• High quality 3m tape• Premium quality products• IP67 dust & water proof• Australian road approved

70mm

30mm 6mm

70mm

30mm 6mm

Function Reflex reflectorSize 70mm x 30mm x 6mm

Approvals Function Category CRNADR Red 47/00 38102

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof



70mm

30mm 6mm

70mm

30mm 6mm

Q ABP 7030A - Amber Reflex Reflector


Approvals Function Category CRNADR Amber 47/00 38101

Part NumberQ ABP 7030A - Blister Twin

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 7030W - White Reflex Reflector


Part NumberQ ABP 7030W - Blister Twin


70mm

30mm 6mm

70mm

30mm 6mm


Approvals Function Category CRNADR White 47/00 38103

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof

• High light output• Flood Beam• IP67 Dust & Water Proof

Fitting InstructionsFix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

Function 18 watt Flood LampSize 110mm x 137mm x 40mmVoltage Multivolt 9-32VLED Qty 6 x 3 wattLumen Raw 1500/Effective 1377Lux@2m 410Cable 25cm cable

[email protected] 0.78A@28V 0.48ALens PolycarbonateBase Die Cast Alloy

110mm 40mm

128mm137mm

5m

0m

5m

15m

25m

5m

15m

25m

25m 50m 100m 150m

25.63lx 1.6lx 0.62lx 0.16lx

Part NumberQ ABP 11518FBM - Blister Single

Active

Q ABP 11518FBM Work Lamp

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP 11618FBM Work Lamp

Part NumberQ ABP 11618FBM - Blister Single

• High light output• Flood Beam• IP67 Dust & Water Proof

Function 18 watt Flood LampSize 115mm x 137mm x 40mmVoltage Multivolt 9-32VLED Qty 6 x 3 wattLumen Raw 1500/Effective 1377Lux@2m 410Cable 25cm cable

[email protected] 0.78A@28V 0.48ALens PolycarbonateBase Die Cast Alloy

110mm 115mm

121mm

45mm 40mm

137mm

5m

0m

5m

15m

25m

5m

15m

25m

25m 50m 100m 150m

25.63lx 1.6lx 0.62lx 0.16lx

Active

Fitting InstructionsFix to mounting surface using stainless steel bolts and adjustable stainless steel bracket supplied.

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP LR12/2 - 12 Volt Load Resistor

Part NumberQ ABP LR12/2 - 12 Volt, Blister twin pack, 50 watt 6Ω ohms

• Designed for late model vehicles that display light failure warning• Draws the same current as a 21 watt globe• IP67 dust & water proof

Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible.

The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle!

Indicator Circuit:If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White).

Brake Circuit:If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White)

Correct Fitting:To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor.Use the 2 screw down points on the resistor to secure it to a metal chassis.

Important Notice:Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces.

12 VoltOn ly

ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water ProofQ ABP LR24/2 - 24 Volt Load Resistor

Dummy load resistors designed to draw the same current as a 21 watt globe. They can be used on vehicles that have electronic components that are not LED compatible.

The Resistor should ALWAYS be wired between the input wires of the lamp, NOT the chassis of the vehicle or trailer! If fitted to the Chassis, a bad earth connection is possible, and can result in problems with the lighting system of the vehicle!

Indicator Circuit:If fitting to the indicator circuit, fit one lead of the resistor to the positive supply side (Yellow wire) and the other lead of the resistor to the negative supply or ground input wire (White).

Brake Circuit:If fitting to the brake circuit, fit one lead of the resistor to the positive supply side (Red Wire) and the other lead of the resistor to the negative supply or ground input wire (White)

Correct Fitting:To fit the resistor, use the crimp terminals supplied. Cut the loom and re-connect the cut wires within the supplied crimp terminal with one side of the resistor crimped into that terminal. Repeat the process for the remaining wire and the other end of the resistor.Use the 2 screw down points on the resistor to secure it to a metal chassis.

Important Notice:Must be mounted on metal surfaces, the resistor can reach up to 170 deg C, do not mount the resistor on any surface that can be melted by the heat of the resistor, this includes plastics, hoses or painted surfaces.


• Designed for late model vehicles that display light failure warning• Draws the same current as a 21 watt globe• IP67 dust & water proof

24 VoltOn ly


ECE

5 YearWarranty

E C EApproved

ECE/ADRApproved

A D RApproved

1 0 0 %Water Proof ECE

5 YearWarranty

E C EApproved

SAE/J845Class 2

A D RApproved

1 0 0 %Waterproof

Q ABP LRB145 - Beacon

Function Rotating effect medium amber beaconSize 144mm round x 96mmVoltage Multivolt 10-30VLED Qty 24Cable 40cm cable


Approvals Function CategorySAE Beacon SAE J845 Class 2

• Rotating Pattern• IP67 Dust & Water Proof• Intense 360° Visibility

Part Number

Q ABP LRB145 - 10-30V, Blister single

Fitting InstructionsRun wires through hole in fixing surface or from the side of the base. Attach with screws provided, ensure foam gasket is between lamp and fixing surface.

96mm

144mm

Active

Alliance LED Lighting In-store Display

Speak to your dealer about Alliance Truck Parts.

Metal Display Stand Not Included

Illustrations and photographs used in this catalogue may vary slightly from the actual product. Prototype samples are sometimes used for photography. The production parts may vary slightly. Availability of products shown in this catalogue is subject to change without notice.

Speak to your dealer about Alliance Truck Parts.www.alliancetruckparts.com.au

better parts. good prices. alliance truck parts. · q abp 280arrm - blister single 282mm 116mm 28mm...

Documents