bedz king assembly instructions | bk161 | tall twin over twin … · 2019. 8. 8. · -always use...
TRANSCRIPT
TALL TWIN OVER TWIN STAIRWAY BUNK BED
Bedz King BK161-Drawers
Thank you for purchasing your Furniture from Bedz King.
Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]
page 1 of 13 (JULY 2018)
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL NOTES
Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep floatation mattress is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.
Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.
page 2 of 13 (July/2018)
WARNING Pursuant to the Consumer Product Safety Improvement Act (CPSIA) Sec. 102 the manufacturer certifies compliance with the Consumer
Product Safety Commission (CPSC) regulations listed below.
**** Product Information **** **** Safety Testing Information ****
Testing performed at one or more of the following independent testing locations: BUNK BED -BK 161 (Stairway) / BK 161EL (End Ladder)
Diversified Testing Laboratories Inc Armstrong Forensic Laboratory
Date of Manufacture: 336 West Front Street 330 Loch'n Green Trail P.O. Box 4004 Arlington, TX 76012 Burlington, NC 27215
Manufactured by: Custodian of Test Records: Bedz King LLC Manager of Compliance and Testing
Made in Brazil
Date Testing Location Regulation 816 111th Street Bedz King LLC January - April 2014 Armstrong 15 U.S.C. § 1278aArlington, TX 76011 816 111th Street November 2014 Armstrong 16 CFR 1303
Arlington, TX 76011 March 2014 Diversified ASTM F 1427-13 Children's Product Certificates avaliable at www.bedzking.com/certificates March 2014 Diversified 16 CFR 1213 and 16 CFR 1513
50
37
To help prevent serious or fatal injuries from entrapment or falls: - Use guardrails on both sides of upper bunk - Never allow a child under 6 years on upper bunk. - Prohibit horseplay on or under bed (s). - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - Prohibit more than one person on upper bunk. wide on upper bunk. - Use ladder for entering and leaving upper bunk. - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - STRANGULATION HAZARD - Never attach or hang wide on lower bunk. items to any part of the bunk bed that are not designed - Ensure thickness of ma�ress and founda�on combined does not for use with the bed, for example, but not limited to exceed 9" and ma�ress is at least 5" below upper edge of guardrails. hooks, belts and jump ropes.
DO NOT REMOVE THIS LABEL
48 2x
24x
48 2x
page 3 of 13 (July/2018)
SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra
A5 12 3,5x16
A10 88 3,5x30
B5 24 +2 1/4"
B7 24 +2 1/4"x110
B16 16 +2 7,0x110
C5 4 15x90
C6 55 +2 10x50
D13 2
G4 space block 2
G8 1
WARNING - CHOKING HAZARD To be Assembled by Adults only!
Small parts can be a choking hazard for children
page 4 of 13 (July/2018)
02
01C6
30
B5
G8+B16
G8+B7
G8
08
09
B5
B16+G8
B7+G8
G8
B16
2x
B5
26
C6
C6C6
C6
C6C6
2x
30
C6
C6C6
C6
C6C6
C6
C6
34
C6
C6
C6C6
C6C6
C6 - 50x
B7 - 04x B16 - 04x B5 - 04xG8 - 01x
page 5 of 13 (July/2018)
WARNINGDO NOT REMOVE THIS LABEL
To help prevent serious or fatal injuries
from entrapment or falls:
Use only mattress which is 74!-75!long and
37-38 !wide on upper bunk.
1/2!1/2
Ensure thickness of mattress and foundation
combined does not exceed 9!and mattress is
at least 5!below upper edge of guardrails.
Never allow a child under 6 years on upper bunk. Use guardrails on both sides of upper bunk.
Prohibit horseplay on or under bed(s).
Prohibit more than one person on upper bunk.
Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD - Never attach or hang
items to any part of the bunk bed that are not designed
for use with the bed,for example, but not limited to
hooks, belts, and jump ropes.
Bedz King LLC.
816 111th Street
Arlington. Texas 76011
USAItem#:
PO
Month/year of Mfg.:
33
03 B5
B5 30
B5
12 B5
B5 B5
B7+G8 B7+G8
30
12 G8+B7
G8+B7 B5 B7
G8+B7 G8+B7 G8 - 01x
G8 B7
G8 B7 - 08x
B5 - 08x
04 C5 C5
C5
C5
C5
C5 - 04x
page 6 of 13 (July/2018)
05 A10
A10 A10
A10 20 A10
A10 A10
A10 20 A10
A10 - 08x
06
45 48 G4
A10 48
45
A10 A10
A10
A10 A10 G4 48
A10
A10 45
(12x) A10
A10 A10
G4 A10
A10 A10
48
A10 - 28x G4 - 02x
page 7 of 13 (July/2018)
G8
B16
08
07
B16+G8
B16+G8
B16+G8
15
15
G8
B5
G8+B16
G8+B16
G8+B16
G8+B7
G8+B7
G8
B7
G8+B7
B7
12
B5
B5
15
15
12
B7+G8
B7+G8B5B5
B5 - 08x B16 - 08x
B7 - 08xG8 - 01x
B5 - 04x B16 - 04xB7 - 04xG8 - 01x
WARNINGDO NOT REMOVE THIS LABEL
To help prevent serious or fatal injuries
from entrapment or falls:
Use only mattress which is 74!-75!long and
37-38 !wide on upper bunk.
1/2!1/2
Ensure thickness of mattress and foundation
combined does not exceed 9!and mattress is
at least 5!below upper edge of guardrails.
Never allow a child under 6 years on upper bunk. Use guardrails on both sides of upper bunk.
Prohibit horseplay on or under bed(s).
Prohibit more than one person on upper bunk.
Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD - Never attach or hang
items to any part of the bunk bed that are not designed
for use with the bed,for example, but not limited to
hooks, belts, and jump ropes.
Bedz King LLC.
816 111th Street
Arlington. Texas 76011
USAItem#: PO
Month/year of Mfg.:
G8
G8
G8
G8
G8
G8
G8G8
B5
B5
page 8 of 13 (July/2018)
09 C6
C6
C6
37
A5
A5 D13
A5
A5
A5
A5 - 12x C6 - 02x D13 - 02x 37
10 A10 A10
A10 A10
21 A10
A10 18
A10
18 A10
A10
A10
A10 - 10x
page 9 of 13 (July/2018)
11
12
45 48 G4
48A10
45
A10 A10
A10 G4 48A10
A10A10 45 A10A10
A10(12x)A10 G4A10 A10
A10 A10
48
A10 - 28x G4 - 02x
A10
A10
A10 A10
A10 A10
A10
A10 - 08x
page 10 of 13 (July/2018)
Option: LEFT 13
A10 A10 A10
5050 A10C6C6
31C6 A10
A10
A10 - 06x
C6 - 03x
page 11 of 13 (July/2018)
14 Option: RIGHT A10
A10
A10
A10
A10
50C6
C6 31 C6
50
A10
A10 - 06x
C6 - 03x
page 12 of 13 (July/2018)
BEDDING SPECIFICATION
- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.
REPLACEMENT PARTS
- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.
page 13 of 13 (July/2018)
Stairway
Bedz King BK - 71
LEFT RIGHT
Thank you for purchasing your Furniture from Bedz King.
Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]
page 1 of 15 (August/2019)
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL NOTES
Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep floatation mattress is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.
Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.
page 2 of 15 (August/2019)
04
03 02
01 03
03
23 05
07 20 03 02
24 01
03
03
12
22
07 03
05
02
19 12 01
03
03
21 05
07 13 03
02
01 03
03
17 15
16 18
14
page 3 of 15 (August/2019)
! WARNING:CHOKING HAZARD - - Small Parts
Not for Children.To be Assembled by an Adult.
A1
A5
A10
A16
B8
B19
B20
C1
C6
D16
E3
E4
G1
G3
G8
SCREWS ARE SHOWN IN ACTUAL SIZE
4,0x30
3,5x16
3,5x30
4,0x40
7,0x50
7,0x70
1/4"x50
8,0x30
10x50
L1
L2
10x10
! WARNING: CHOKING HAZARD - - Small Parts
Not for Children. To be Assembled by an Adult.
Qty. Extra
40
18
47 +2
6
10
6
8
94 +2
4
1
4
4
42
1
1
page 4 of 15 (August/2019)
C101 C1 C1
C1 23 C1 C6
01 C1 C6 C6
C6 C1
C1
02
C1 C1
03 C1 C1C1
C1 C1
C1
2122
C1 C1 C1
C1
C1 C1C1
C1 15
C1C104 4x
16 4x
C1 - 94x C6 - 04x
02 B19B19B19
24
G3+B19G3+B19G3+B19
B19
G3 B19 - 06x G3 - 01x page 5 of 15 (August/2019)
03
04
05
A1
01
A1
03 A1
A1
03 A1
02
A1 - 24x
03 A1
A1
05
A10 - 12x page 6 of 15 (August/2019)
A10
A10
A10
A10
A10
A10
A10
A10
04
A10 - 07x
A10 A10 A10 A10
A10
06
07
Finishing side
A10
A10
A10 A10
21
A10 - 03
G1 G1
G1 G1 G1G1
G1 G1
G1
G1 G1
21
G1 G1 G1
G1 - 14x
08
A10
A10
A10 A10
22
A10 - 03 page 7 of 15 (August/2019)
09
Finishingside
Finishingside
G1 G1
G1 G1 G1G1
G1 G1
G1
G1 G1
22
G1 G1 G1
G1 - 14x
10
A10
A10
A10 A10
23
A10 - 03
11
G1 G1
G1
G1 G1
G1
G1 G1
G1
G1 G1
G1 G1 23 G1
G1 - 14x page 8 of 15 (August/2019)
12 - RIGHT
G8+B8
G8+B8
G8+B8
G8+B8
522
621
B8
G8
12 - LEFT
B8 - 04x G8 - 01x
G8+B8
G8+B8
522
G8+B8
G8+B8
621
B8
G8 B8 - 04x G8 - 01x
page 9 of 15 (August/2019)
13 - RIGHT B8
1020
G8 043G8+B8
G8+B8
G8+B8
G8+B8 234
13 - LEFT
B8 - 04x G8 - 01x
B8
1020
G8+B8
G8+B8
304 G8
G8+B8
G8+B8 423
B8 - 04x G8 - 01x
page 10 of 15 (August/2019)
14 - RIGHT B8
B8+G8 G8
B20 B20 B8+G8
B20
B20
B20
B20
B20
B20B20
B8 - 02x
B20 - 08x G8 - 01x
14 - LEFT
B8 G8+B8
G8
B8 - 02x B20 - 08x
G8 - 01x
G8 G8+B8 B20 B20
B20 B20
B20 B20 B20
G8
B20B20
page 11 of 15 (August/2019)
15
Finishing
side
1715 16 4x
A1A1 A1
A10 A10
A10A10
18
A1 14
A1 - 16x A10 - 16x
16 A5
A5 E3 A5
A5
A5 E4
A5
4x A5 - 16x E3 - 04x E4 - 04x
17
A10
A10 A10
A10 A10
A10 A10
LEFT RIGHT A10 - 03x page 12 of 15 (August/2019)
18 - RIGHT - TWIN
A16
A16
A16
01
A16
A16
D16 A16
A5 A5
01
18 - RIGHT - FULL A5 - 02x A16 - 06x D16 - 01x
01
A5D16
01 A5 page 13 of 15 (August/2019)
19 - LEFT - TWIN
A16
A16
A16
A16
A16
A16
01
A5
D16 A5
01
A5 - 02x A16 - 06x D16 - 01x
19 - LEFT - FULL
01
A5 D16
A5 01
page 14 of 15 (August/2019)
BEDDING SPECIFICATION
- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
TWIN OVER TWIN Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.
TWIN OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.
FULL OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.
REPLACEMENT PARTS
- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.
page 15 of 15 (August/2019)
#
Xqghu#Ehg#Gudzhuv#Ehg}#Nlqj#EN73
Wkdqn#|rx#iru#sxufkdvlqj#|rxu#Ixuqlwxuh#iurp#Ehg}#Nlqj1#
Hyhu|#hiiruw#kdv#ehhq#pdgh#wr#hqvxuh#|rxu#Ixuqlwxuh#lv#ri#wkh#ilqhvw#txdolw|1#Li#|rx#kdyh#dq|#txhvwlrqv/#sohdvh#gr#qrw#khvlwdwh#wr#frqwdfw#xv#dw#lqirCehg}nlqj1frp#
sdjh#4#ri#6#+NOV 2017,#
4 2
5
6
53 1
2x
SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra
A19 26 4,0x30
A24 36 3,5x12
C1 28 +1 8x30
D20 2
E12 8
A2401 A24 A24 E12E12
A24 3 A24
2X E12
A24
AC1 A24C1
C1A E12C1
C1 4A24 A24C1 E12
C12 A24 C1
C16A24 - 32x
C1C1 C1
C1 - 28x E12 - 08x page 2 of 3 (NOV/2017)
02
A19
A19 A19
2
3
6
2X
A19
A19 A19
4
A19 - 12x
03
5
5
2X
04 05
2X A24
2X A19 A19
D20 A24
A19
A19
A19 A19 A19
A19 - 12x A19 - 02x A24 - 02x D20 - 02x
page 3 of 3 (NOV/2017)