prin

ted

in C

AnAd

A

BEAM SEATING

ART DESIGN INTERNATIONAL, 3450, 1st Street, St-Hubert (Quebec), Canada J3Y 8Y5 • T (450) 926-1004 / (888) 663-6794 • F (450) 926-0013 / (888) 407-6435

Greenguard certified, manufactured in ADI’s ISO 9001 and ISO 14001 compliant facility.

Let your imagination create the ideal combination! The Beam Seating series was designed to accept a broad range of already existing ADI seats

and arms. This flexibility makes it easy to custom build spaces with a wide selection of styles.

From the modern look of polished aluminum on the Voila to the classic wood shell of the Clover

or the knit back on the Tact - the beam seating has you covered.

The beam modules may be assembled in line, angled or bolted to the floor. Corner, regular or

cantilever tables may be added to the ensemble. Arms can be installed in between the seats/

tables and at the ends, as needed. Beam Seating models come with 4 leg options, 9 powder coat

paint finishes and 4 laminate table tops.

Combined with infinite fabric offerings and a variety

of seat and back options, creative combinations are

only limited by your imagination.

Tilting seats, ideal in tight areas.

BMA BMT BMTC1

OW Off White PA Chrome paint SG Silver Grey CH Charcoal SX Sandex Black

Other finishes available upon request

LGL Light Grey TAL Taupe CHL Charcoal BLL Black

Other laminates available upon request

BE-2 / 45 ½” BE-3 / 69” BE-4 / 92 ½” BE-5 / 116”

Distance between each position: 23 ½” BE-6 / 139 ½”

Dimensions

Beam Seating modules are available in 5 different sizes, made to accommodate all seats, tables, arms and legs offered in this series. Two or three seater beams, with a respective capacity of 1,000 lbs and 1,500 lbs are also available.

Beams and Legs

Laminate Tops

Table (19”x19”x1”) / BRT Cantilever Table (19”x19”x1”) / BRHT Corner Table (30”x30”x1”) / BCT

Legs

4 leg options are available on all beam sizes.

Metal finish

All metal surfaces are powder coated. The following finishes are available. Finishes from the ADI finish card may also be specified.

Tables

BMF / Fixed Base

www.adi-artdesign.com

prin

ted

in C

AnAd

A

BEAM SEATING

ART DESIGN INTERNATIONAL, 3450, 1st Street, St-Hubert (Quebec), Canada J3Y 8Y5 • T (450) 926-1004 / (888) 663-6794 • F (450) 926-0013 / (888) 407-6435

Greenguard certified, manufactured in ADI’s ISO 9001 and ISO 14001 compliant facility.