baureihe dp 13213us.qxd:m-da - maier heidenheim€¦ · 4 dp r 1 -100 15 -700 application data /...

Rotary JointsSeries DP – US Catalog

NPT Threads

2

DP rotary joints are suitable for:

– hot and cold water– modified design -750 for thermal oil– Small Series also for hydraulic oil and

compressed air– high speeds possible due to low frictional torque– can be delivered with Atex certification

DP is available in four variants:

– DP 06, the Small Series, page 11– DP 10 up to 50 with variation -750, page 6 to 10– DP 65 up to 100, the Large Series, page 12 to 15– DPN, the Stainless Steel Series, page 16 to 18

The Standard Series DP 3/8 to 2

Other advantages– low frictional torque (important for plastic foil

production) – long service life– easy field repair and maintenance.

Both housing and elbow are made of brass and are beadblasted without harm to the environment.The bearings are protected by 5 drain holes in the housing.

Chrome steel rotor.

Two ball bearings, factory-lubricated, maintenance-free up to 176° F, for higher temperatures relubri-cation through easily accessible grease point required.

The internal mechanical seal is balanced and can be easily replaced with other sealing combinations.Combination 1 suitable for water up to 176° F, 3 for water and thermal oil up to 320° F, 4 recom-mended for contaminated water, 5 for air.

Series -750 for thermal oil, equipped with heat-stabilized ball bearings, Viton O-rings and axial shaft seal for additional bearing protection.

Connection to rotating pressure system by means of– standardized connection pieces with right-hand or

left-hand male thread NPT (ANSI)– K-flange and conical inner ring (DN 11/2 and larger)– fixed flange (DN 11/2 and larger), sealing with

groove and O-ring.

Radial housing connection with right-hand threadNPT (ANSI), axial with right-hand thread NPT (ANSI) and screw plug. For series -750 radial and

axial housing connections with right-hand threadNPT (ANSI). Axial thread with screw plug.

Due to the low frictional moment anti-rotatio-nal devices are not required.

Elbows

DP Rotary Joints are supplied as one way flow unions which can be converted to two way flowunions by using elbows:– P 2 ... for non-rotating inner pipe (with thread)– PR 2 ... for rotating inner pipe (directly located

in elbow)– PO 2 ... for non-rotating inner pipe, which floats

within the elbow and O-ring, anti-rotational protection by means of screw. Inner pipes for type PO2 are available.

– PO 2 ... -700 as PO 2, but with Viton O-ring for thermal oil.

Drain Plug and Hose Coupling for drain holes

In dusty environment we recommend to block thedrain holes with plugs to protect the seal. A drainhose coupling for a 1/4 inch tube (OD) shall beconnected to the 6 o’clock position drain hole.

1 set (art.no.1190345) =

4 drain plugs +1 hose coupling,suitable for all sizes.

Rotary Joints Series DP

Subject to technical changes

3

The Large Series DP 21/2 to 4

The advantages of low frictional torque have been maintained. High speeds are possible, too.

Balanced mechanical seal. The springs are situatedoutside of the medium flow.

Housing made of lacquered steel. We offer 3 types of housings: for one way flow, two way flow, non-rotating and rotating inner pipe. The inner pipes are supported in the housing, no elbow required.

Bearings are factory-lubricated, lubrication pointeasily accessible.

Connection to the rotating pressure system same as Standard Series.

Radial and axial housing connection with right-hand female thread NPT (ANSI).

Anti-rotation device despite low torque to protect the hoses.

Set of drain plugs fits Large Series as well.

All other technical features same as Standard Series.

The Stainless Steel Series DPN

The design of series DPN corresponds to that of the Standard Series. DPN is suitable for appli-cations in the food industry or for aggressive media or areas. The standard design is made of 430F (1.4104) steel. For demanding applications a modified design type -100 is available in 316Ti (1.4571).

One way flow design is available with radial (1B) or axial (1C) connection. The two way flow design is available for non-rotating (2) or rota-ting (R2) inner pipe. The radial connection canbe used in any position on a radius of 360°.

Ball bearings, factory-lubricated for life.

Connection to rotating pressure system by means of standardized connection pieces with right-hand or left-hand male thread NPT (ANSI).

Radial and axial housing connection with right-hand female thread NPT (ANSI).

All other technical features same as StandardSeries.

The Small Series DP 1/4

Housing made of anodized aluminium. Atex design without anodization.

Ball bearings, factory-lubricated for life.

Housing only available for one way flow with radial connection, right-hand female thread NPT (ANSI) or for installation into the roll journal with axial connection.

Connection to rotating pressure system by means of standardized connection pieces with right-hand or left-hand male thread in NPT (ANSI).

Subject to technical changes

4

DP R 1 -100

15 -700

Application Data / Ordering instructions series DP

Application DataSeries

Design

Nominal diameter DN inch

Medium

Temperature min...max °FPressure PN min...max psig

Speed max...rpm

DP

...1/4

compressed aircooling water

hot waterhydraulic oil )*

14...248-3...145

3000

DP

3/8...2

cooling waterhot water

14...320-3...145

2200/DN2500

DP-750

3/8...2

thermal oil

32...320-3...145

2200/DN2500

DPN

1B, 1C, 2, R23/8...2


14...194-3...145

2200/DN2500

DP

1, 2, R2

21/2...4


14...284-3...145

2200/DN850

Avoid combination of maximum values. Higher values, other media and other threads upon request.)* Application data for hydraulic oil: max 176°F, 1160 psi, 400 rpm

Ordering instructions Example:

Standard and Small Series DP Page 6 to 11

Nominal diameters DN in inch (=̂ dimension A)1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2

Rotor connectionR right-hand threadL left-hand threadK K-flange DN 11/2 and DN 2F fixed flange DN 11/2 and DN 2

Possible combinations ofhousing connection B with rotor connection D

0 NPT K or F1 NPT G3 NPT NPT Other combinations upon request.

Sealing combination1 synthetic carbon 19K – chrome steel 18E3 metal impregnated synthetic carbon 19W – SIC 18C (silicon carbide)4 SIC 19C – SIC 18C5 synthetic carbon 19K – SIC 18C DP 1/4 only available with combination 5

Consecutive numbers for special designs, numbering done by factory, -750 for thermal oil.

Ordering instructions - Elbow P Example:

Design for inner pipeP2 non-rotating (with right-hand thread, NPT, ANSI)PR2 rotatingPO2 non-rotating (floating within O-ring)

Nominal diameter identical with nominal diameter of DP

Thread at connection C2U for US size (ANSI) inner pipe and NPT thread at inner pipeN for European size inner pipe and G thread at inner pipe

Consecutive numbers for special designs, numbering by factory, -700 for hot oil.

315

PO2 N

RDP 2 L 4 -001

1BDPN R 3 -101

5


The Stainless Steel Series DPN Page 16 to 18

Number of housing connections1B radial connection1C axial connection2 two way flow with fixed inner pipeR2 two way flow with rotating inner pipe

Nominal diameter DN in inch (=̂ dimension A)3/8, 1/2, 3/4, 1, 11/4, 11/2, 2

Rotor connectionR right-hand threadL left-hand threadK K-flange DN 11/2 and DN 2


0 NPT K1 NPT G3 NPT NPT Other combinations on request.

Sealing combination1 synthetic carbon 19K – chrome steel 18E3 metal impregnated synthetic carbon 19W – SIC 18C (silicon carbide)4 SIC 19C – SIC 18C

001 Consecutive numbers for special designs in stainless steel 430 F ( 1.4104), numbering by factory.100 Housing and rotor in stainless steel 316 Ti (1.4571).101 Special designs in stainless steel 316 Ti (1.4571) – numbering by factory.


The Large Series DP 21/2 to 4 Page 12 to 15

Design for rotating inner pipe R with slide bearing and gland seal

Number of housing connections1 for one way flow2 for two way flow

Nominal diameters DN in inch (=̂ dimension A)21/2, 3, 31/2, 4

Rotor connectionR right-hand threadL left-hand threadK K-flange


0 NPT K or F1 NPT G3 NPT NPT Other combinations on request.

Sealing combination1 synthetic carbon 19K – chrome steel 18E3 metal impregnated synthetic carbon 19W – SIC 18C (silicon carbide)4 SIC 19C – SIC 18C

Consecutive numbers for special designs, numbering by factory.

100 3

25 3

6

DP DN 3/8 -2

0.5121/2

1/2

3.858

2.283

0.984

0.9450.427

3/8

1.1812.2

0.6893/4

3/4

4.409

2.913

1.220

1.1810.446

1/2

1.4174.0

0.86611

5.039

3.307

1.417

1.4570.530

3/4

1.8115.3

1.1811 1/4

1 1/4

6.024

3.937

1.654

1.8110.550

1

2.1659.9

1.3781 1/2

1 1/2

6.9296.4576.6934.331

1.967 / 1.9692.557 / 2.558

1.7720.3940.7872.1060.5503.937

5 x 0.3541 1/4

0.5913.1502.36213.6

1.85022

7.5207.9137.5595.394

2.557 / 2.5593.147 / 3.148

2.2440.3940.7872.3620.5674.921

5 x 0.4331 1/2

0.5913.9372.95319.8

3/8

DP 10 R 311112050-031

DP 10 L 311112051-031

1/2

DP 15 R 311112100-031

DP 15 L 311112101-031

3/4

DP 20 R 311112150-031

DP 20 L 311112151-031

1

DP 25 R 311112200-031

DP 25 L 311112201-031

11/4

DP 32 R 311112250-031

DP 32 L 311112251-031

11/2

DP 40 R 311112300-031

DP 40 L 311112301-031DP 40 K 01

1112302-001DP 40 F 01

1112303-001

2

DP 50 R 311112350-031

DP 50 L 311112351-031DP 50 K 01

1112352-001DP 50 F 01

1112353-001

0.3743/8

3/8

3.465

2.126

0.945

1.0430.323

1/4

0.9451.8

Fixed flange F

K-flange see page 19

Ø AB2 (NPT)D (NPT)F1F2F3Ø JØ K2 Ø K3 MO2O3PG +/-0.2U 1)

Ø ADAZ x ø DBJG (NPT)KBØLKSWWeight (lbs)

DN

TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.

1) approx. engagement depth (wrench tight)

7

P DN 3/8 -2

1/4

0.7090.1971.6730.1970.315

M 6 x 1

0.232/0.236

0.984

5.0791/4

0.8661.063

0.2

Ø W 4Ø EQELLW

3/8

0.7870.1971.5160.1970.217

1/8

0.370/0.3710.390/0.394

0.7680.9844.5285.0795.315

3/8

0.8661.063

0.2

1/2

1.0240.1972.0080.1970.311

1/4

0.495/0.4960.508/0.512

1.0041.1025.3356.0436.142

1/2

1.2601.378

0.7

1/2

1.1020.1972.3230.1970.323

3/8

0.619/0.6210.626/0.630

1.1021.2206.1816.9887.087

3/4

1.2601.496

0.7

3/4

1.3780.1972.9130.1970.427

1/2

0.743/0.7450.862/0.866

1.3781.4967.5008.4658.583

11.4171.850

1.1

3/4

1.4960.1973.2280.1970.446

3/4

0.994/0.9961.020/1.024

1.4571.5758.6819.6859.8031 1/4

1.4171.929

1.3

1 1/4

1.7720.1973.8580.1970.530

11.243/1.2451.335/1.339

1.5351.5759.59010.59110.630

1 1/2

2.1652.303

2.9

3/8

P2 10 N1112069

PO2 10 N1112071

1/2

P2 15 U1112122PR2 15 U1112123PO2 15 N1112121

3/4

P2 20 U1112172PR2 20 U1112173PO2 20 N1112171

1

P2 25 U1112222PR2 25 U1112223PO2 25 N1112221

11/4

P2 32 U1112272PR2 32 U1112273PO2 32 N1112271

11/2

P2 40 U1112322PR2 40 U1112323PO2 40 N1112321

2

P2 50 U1112372PR2 50 U1112373PO2 50 N1112371

3/8

ES 101190951

1/2

ES 151190952

3/4

ES 201190953

1

ES 251190954

11/4

ES 321190955

11/2

ES 401190956

2

ES 501190957

0.390/0.3940.3157.4022.165

0.507/0.5120.4337.5982.165

0.626/0.6300.5519.9212.953

0.861/0.8660.787

10.5912.165

1.019/1.0240.945

11.6932.165

1.332/1.3391.22013.4652.953

0.233/0.2360.1976.9292.165

Elbow for series DP

Type P 2

for non-rotating inner pipe (with right-hand thread)

Type PO 2

for non-rotating inner pipe, floating within elbowand O-ring, anti-rotational protection by meansof screw. Inner pipe for type PO 2 available.

Type PR 2

for rotating inner pipe, directly supported in elbow

Inner pipe for Elbow PO2

C2 (NPT)MNP+/- 0.2Ø SV 1)

W 1 (NPT)Ø W 2 (pipe)Ø W 3 (pipe)XYZ1 1)

Z2Z3AG (NPT)SWWLWeight (lbs)

DN

TypeOrder-No.TypeOrder-No.TypeOrder-No.

DN

TypeOrder-No.


8

DP ...-750 DN 3/8 -2

0.3743/8

3/8

3.465

2.126

0.945

1.0430.323

1/4

0.9451.8

0.5121/2

1/2

3.858

2.283

0.984

0.9450.427

3/8

1.1812.2

0.6893/4

3/4

4.409

2.913

1.220

1.1810.446

1/2

1.4174.0

0.86611

5.039

3.307

1.417

1.4570.530

3/4

1.8115.3

1.1811 1/4

1 1/4

6.024

3.937

1.654

1.8110.550

1

2.1659.9

1.3781 1/2

1 1/2

6.9296.4576.6934.331

1.967 / 1.9692.557 / 2.558

1.7720.3940.7872.1060.5503.937

5 x 0.3541 1/4

0.5913.1502.36213.6

1.85022

7.5207.9137.5595.394

2.557 / 2.5593.147 / 3.148

2.2440.3940.7872.3620.5674.921

5 x 0.4331 1/2

0.5913.9372.95319.8

3/8

DP 10 R 33-7501112050-750

DP 10 L 33-7501112051-750

1/2

DP 15 R 33-7501112100-750

DP 15 L 33-7501112101-750

3/4

DP 20 R 33-7501112150-750

DP 20 L 33-7501112151-750

1

DP 25 R 33-7501112200-750

DP 25 L 33-7501112201-750

11/4

DP 32 R 33-7501112250-750

DP 32 L 33-7501112251-750

11/2

DP 40 R 33-7501112300-750

DP 40 L 33-7501112301-750

DP 40 K 03-7501112302-750

DP 40 F 03-7501112303-750

2

DP 50 R 33-7501112350-750

DP 50 L 33-7501112351-750

DP 50 K 03-7501112352-750

DP 50 F 03-7501112353-750

Ø AB2 (NPT)D (NPT)F1F2F3Ø JØ K2 Ø K3 MO2O3PG +/-0.2U 1)

Ø ADAZ x Ø DBJG (NPT)KBØ LKSWWeight (lbs)

DN


Fixed flange F



9

P ...-700 DN 3/8 -2

3/4

0.7090.1971.6730.1970.315

M 6 x 1

0.232/0.236

0.984

5.0791/4

0.8661.0630.2

3/8

0.7870.1971.5160.1970.217

1/8

0.370/0.3710.390/0.394

0.7680.9844.5285.0795.315

3/8

0.8661.0630.2

1/2

1.0240.1972.0080.1970.311

1/4

0.495/0.4960.508/0.512

1.0041.1025.3356.0436.142

1/2

1.2601.378

0.7

1/2

1.1020.1972.3230.1970.323

3/8

0.619/0.6210.626/0.630

1.1021.2206.1816.9887.087

3/4

1.2601.496

0.7

3/4

1.3780.1972.9130.1970.427

1/2

0.743/0.7450.862/0.866

1.3781.4967.5008.4658.583

11.4171.850

1.1

3/4

1.4960.1973.2280.1970.446

3/4

0.994/0.9961.020/1.024

1.4571.5758.6819.6859.8031 1/4

1.4171.929

1.3

1 1/4

1.7720.1973.8580.1970.530

11.243/1.2451.335/1.339

1.5351.5759.59010.59110.630

1 1/2

2.1652.303

2.9

Ø W 4Ø EQELLW

3/8

P2 10 N1112069

PO2 10 N-7001112071-700

1/2

P2 15 U1112122PR2 15 U1112123

PO2 15 N-7001112121-700

3/4

P2 20 U1112172PR2 20 U1112173

PO2 20 N-7001112171-700

1

P2 25 U1112222PR2 25 U1112223

PO2 25 N-7001112221-700

11/4

P2 32 U1112272PR2 32 U1112273

PO2 32 N-7001112271-700

11/2

P2 40 U1112322PR2 40 U1112323

PO2 40 N-7001112321-700

2

P2 50 U1112372PR2 50 U1112373

PO2 50 N-7001112371-700

3/8

ES 101190951

1/2

ES 151190952

3/4

ES 201190953

1

ES 251190954

11/4

ES 321190955

11/2

ES 401190956

2

ES 501190957

0.390/0.3940.3157.4022.165

0.507/0.5120.4337.5982.165

0.626/0.6300.5519.9212.953

0.861/0.8660.787

10.5912.165

1.019/1.0240.945

11.6932.165

1.332/1.3391.22013.4652.953

0.233/0.2360.1976.9292.165

Elbow for series DP

Inner pipe for Elbow PO2 ...-700

C2 (NPT)MNP+/- 0.2Ø SV 1)

W 1 (NPT)Ø W 2 (pipe)Ø W 3 (pipe)XYZ1 1)

Z2Z3AG (NPT)SWWLWeight (lbs)

DN

TypeOrder-No.TypeOrder-No.TypeOrder-No.

DN

TypeOrder-No.


Type P 2

for non-rotating inner pipe (with right-hand thread)

Type PR 2

for rotating inner pipe, directly supported in elbow

Type PO 2

for non-rotating inner pipe, floating within elbowand O-ring, anti-rotational protection by meansof screw. Inner pipe for type PO 2 available.

10

3/8

111209211120801112081

1112088-0011112088-0023511391-0013511391-0021112088-002

35116613511809

3511809-00135118603510200

3510077-01035010003501220

3500663-004

35009183512325-001

1/2

111214211121301112131

1112138-0011112138-0023511392-0013511392-0021112138-002

35116623511866

3511866-00135118673510079

3510079-01035010013501219

3500662-004

35009183512326-001

3/4

111219211121801112181

1112188-0011112188-0023511393-0013511393-0021112188-002

35116633511721

3511721-00135118613510202

3510097-01035010023501222

3500684-004

35009183512327-001

1

111224211122301112231

1112238-0011112238-0023511394-0013511394-0021112238-002

35116643511929

3511929-00135118623510203

3510082-01035010033501223

3500621-004

35009183512328-001

11/4

111229211122801112281

1112288-0011112288-0023511395-0013511395-0021112288-002

35116653511947

3511947-00135118633510086

3510086-01035010083501205

3500622-004

35009183512329-001

11/2

11123421112330111233111123361112337

1112338-0011112338-0023511396-0013511396-0021112338-002

35116663511886

3511886-00135118643510204

3510087-01035010143501221

3500623-0043511948

3511948-0013500918

3512330-001

2

11123921112380111238111123861112387

1112388-0011112388-0023511397-0013511397-0021112388-002

35116673511696

3511696-00135118653510090

3510090-01035010303501246

3500624-0043511949

3511949-0013500918

3512331-001

3/8

35117293511729-0013500014-0033502122-001

1/2

35118493511849-0013500014-0033502122-001

3/4

35117223511722-0013500015-0033502122-001

1

35119443511944-0013500015-0033502122-001

11/4

35118523511852-0013500014-0033502122-001

11/2

35117233511723-0013500014-0033502122-001

2

35119453511945-0013500015-0033502122-001

Spare Parts for Elbow PO2

289

1415

18E18C19K19W19C2021

21a2223

23a24252629

29a30

31a

DN

Housing NRotor RNRotor LNRotor KRotor FMechanical seal EMechanical seal CCounter face KCounter faceWCounter face CCompression springO-ringO-ringO-ringBall bearingBall bearingCirclipCirclipScrew plugO-ringO-ringGrease nippleShaft seal

3232a3334

DN

O-ringO-ringHex. screwCU-seal

Pos. 31a instead of Pos. 22 upon request for additional bearing seal (a) = execution for variant -700/-750 (thermal oil)

DP Spare Parts DN 3/8 -2

11

1/4

DP 06 R 351112000-035

DP 06 L 351112001-035DP 06 R -1061112000-106DP 06 L-1061112001-106

0.2561/4

1/4

3.1503.5042.7561.5750.6890.3112.3621.3191.1810.1260.748

1.000 +0.0021.640 +0.005

2.4211.259 +0.010

0.7

06

11120421112041-0581112030-0021112030-0651112031-0021112031-0653502113-0013511390-001

35115213511704-0013511906-016

3510047350102535012003511868

DP .. R/L 35

DP .. R/L -106

Spare Parts DN 1/4

DN


Ø ABDE1E2FØJMU 1)

GM1GM2LAØLBSWWZ1WZ2ZL1ZL2Weight (lbs)

258

8a9

9a171820212223242529

DN

Housing NHousing (-106)Rotor RNRotor RN (-106)Rotor LNRotor LN (-106)DiscMechanical sealCompression springO-ringO-ringBall bearingCirclipCirclipO-ring

DP DN 1/4 and Spare Parts

DP .. R/L 35 DP .. R/L -106


12

DP1 DN 2 1/2 -4

2.5592 1/2

2 1/2

12.87410.6300.3947.2834.094

2.837/2.8393.856/3.858

2.4615.2760.7480.7874.3310.8075.709

5x 0.433-

1.0244.7243.34669.3

2.83533

14.76412.0080.3948.8584.528

3.434/3.4374.132/4.133

3.3465.9451.1810.3155.1180.8917.283

4x 0.709-

0.7875.7094.331127.6

3.2283

3 1/2

14.76412.0080.3948.8584.921

3.931/3.9334.002/4.004

3.3465.9451.0000.2525.1180.9469.000

6x 0.6895.5510.8747.5594.331127.6

3.85844

16.73213.3860.472

10.1575.669

4.427/4.4294.747/4.748

3.9376.6541.0000.2956.1020.969

10.8666x 0.807

6.2990.8749.0004.724193.6

21/2

DP 165 R 311112400-031DP 165 L 31

1112401-031DP 165 K 01-U1112402-001-U

DP 165 F 011112403-001

3

DP 175 R 311112575-031DP 175 L 31

1112576-031DP 175 K 011112577-001DP 175 F 01

1112578-001

31/2

DP 180 R 311112450-031DP 180 L 31

1112451-031DP 180 K 01-U1112452-001-U

DP 180 F 011112453-001

4

DP 1100 R 311112550-031DP 1100 L 311112551-031

DP 1100 K 01-U1112552-001-UDP 1100 F 011112553-001

for one way flow of a medium

Ø AB2 (NPT)D (NPT)EF Ø HØ JØ KØ K2Ø K3MNOO1RU 1)

Ø ADAZ x Ø DBAPKBLKSWWeight (lbs)

DN



Fixed flange DN 2½/3 Screw flange

DN 3½/4


13

DP2 DN 2 1/2 -4

Foto

: CO

ATE

MA

2.5591 1/2

1 1/2

2 1/2

13.58310.0390.3947.2834.094

2.837/2.8393.856/3.858

2.4615.2760.7480,7874.3310.8070.5511 1/2

11.5755.709

5x 0.433-

1.0244.7243.34661.6

2.835223

15.86611.4170.3948.8584.528

3.434/3.4374.132/4.133

3.3465.9451.1810.3155.1180.8910.567

213.2837.283

4x 0.709-

0.7875.7094.331114.4

3.22822

3 1/2

15.86611.4170.3948.8584.921

3.931/3.9334.002/4.004

3.3465.9451.0000.2525.1180.9460.567

213.2839.000

6x 0.6895.5510.8747.5594.331114.4

3.8582 1/2

2 1/2

417.52012.5980.472

10.1575.669

4.427/4.4294.747/4.748

3.9376.6541.0000.2956.1020.9690.8072 1/2

14.98010.866

6x 0.8076.2990.8749.0004.724165.0

21/2

DP 265 R 31-U1112404-031-UDP 265 L 31-U

1112405-031-UDP 265 K 01-U1112406-001-UDP 265 F 01-U

1112407-001-U

3

DP 275 R 31-U1112579-031-UDP 275 L 31-U

1112580-031-UDP 275 K 01-U1112581-001-UDP 275 F 01-U

1112582-001-U

31/2

DP 280 R 31-U1112454-031-UDP 280 L 31-U

1112455-031-UDP 280 K 01-U1112456-001-UDP 280 F 01-U

1112457-001-U

4

DP 2100 R 31-U1112554-031-UDP 2100 L 31-U1112555-031-UDP 2100 K 01-U1112556-001-UDP 2100 F 01-U1112557-001-U

for two way flow of a medium designed for non-rotating inner pipe

Ø AB2 (NPT)C2 (NPSC)D (NPT)EF Ø HØ JØ KØ K2Ø K3MNOO1RU 1)

V 1)

W (NPSC)Z1 1)

Ø ADAZ x Ø DBAPKBLKSWWeight (lbs)

DN




Fixed flange DN 2½/3 Screw flange

DN 3½/4

14

DPR2 DN 2 1/2 -4

2.5591 1/2

1 1/2

2 1/2

13.58310.0390.3947.2834.094

2.837/2.8393.856/3.858

2.4615.2760.7480.7874.3310.807

1.747/1.7491.500

12.5245.709

5x 0.433-

1.0244.7243.34661.6

2.835223

15.86611.4170.3948.8584.528

3.434/3.4374.132/4.133

3.3465.9451.1810.3155.1180.891

2.249/2.2511.500

14.2177.283

4x 0.709-

0.7875.7094.331114.4

3.22822

3 1/2

15.86611.4170.3948.8584.921

3.931/3.9334.002/4.004

3.3465.9451.0000.2525.1180.946

2.249/2.2511.500

14.2179.000

6x 0.6895.5510.8747.5594.331114.4

3.8582 1/2

2 1/2

417.52012.5980.472

10.1575.669

4.427/4.4294.747/4.748

3.9376.6541.0000.2956.1020.969

2.748/2.7502.000

16.17310.866

6x 0.8076.2990.8749.0004.724165.0

21/2

DPR 265 R 31-U1112408-031-UDPR 265 L 31-U1112409-031-UDPR 265 K 01-U1112410-001-UDPR 265 F 01-U1112411-001-U

3


31/2


4

DPR 2100 R 31-U1112558-031-UDPR 2100 L 31-U1112559-031-U

DPR 2100 K 01-U1112560-001-U

DPR 2100 F 01-U1112561-001-U

Ø AB2 (NPT)C2 (NPT)D (NPT)EF Ø HØ JØ KØ K2Ø K3MNOO1RU 1)

Ø W2 (bushing)XZ2 Ø ADAZ x Ø DBAPKBLKSWWeight (lbs)

DN


for two way flow of a medium designed for rotating inner pipe



Fixed flangeDN 2½/3 Screw flange

DN 3½/4

15

21/2

11124451112446-0611112447-062

111241911124301112431

1112436-060111243711124151112417

1112438-0011112438-0023511385-0013511385-0021112438-002

351155035117083512553

3510263-0063510007-006

35010053501253

-35116943500913

3512358-0013500354-070

351054635006783500686

3

11124951112496-0611112497-062

1112469111260511126061112611111261211124651112467

1112488-0011112488-0023511386-0013511386-0021112488-002

351155135125533511828

3510103-006351020835010063501238

-35119013500913

3512319-0013500354-070

351054935006783500686

31/2

11124951112496-0611112497-062

111246911124801112481

1112486-060111248711124651112467

1112488-0011112488-0023511386-0013511386-0021112488-002

351155135125533511828

3510103-006351020835010063501238

1190472-00935118283500913

3512319-0013500354-070

351054935006783500686

4

11125451112546-0611112547-062

111251911125301112531

1112536-060111253711125151112517

1112539-0011112539-0023511388-0013511388-0021112539-002

35115513511828

3511815-0123510144-0063510145-006

35010313501247

1190473-01435117163500913

3512334-0013500354-070

351054835005873500686

Spare Parts for types DP1, 2, R2 – DN 2 1/2 -4

DN

Housing 1 NHousing 2 NHousing R2 NSpacerRotor R NRotor L NRotor KRotor FFixing ringThrust collarMechanical Seal EMechanical Seal CCounter Face KCounter Face WCounter Face CCompression springO-RingO-RingBall Bearing 1Ball Bearing 2CirclipCirclipScrew FlangeO-RingLubric.nippleShaft SealCyl.screwSlide BearingStud boltEye bolt

*Pos.31: optional additional seal for bearing. Please specify exact type designation when inquiring or ordering.

1a2a4a589

1415161718E18C19K19W19C20212223a23b242527293031*36373839

DN 3½/4

DN 2½/3

16

DPN1 DN 3/8 -2

0.3743/8

3/8

3.465

2.126

0.945

0.3231.1811.7720.9453.1

0.5121/2

1/2

3.858

2.283

0.984

0.4270.9841.9691.1813.5

0.6893/4

3/4

4.409

2.913

1.220

0.4461.3392.3621.4176.6

0.86611

5.039

3.268

1.417

0.5301.6142.7561.81111.0

1.1811 1/4

1 1/4

6.024

3.937

1.654

0.5502.1263.1502.16516.7

1.3781 1/2

1 1/2

6.9296.4574.331

1.967/1.9691.7720.3940.5502.2053.5432.36225.3

1.85022

7.5207.9135.394

2.557/2.5592.2440.3940.5672.4803.9372.95337.4

1/2

DPN 1B15 R 311113100-031

DPN 1B15 L 311113101-031

DPN 1C15 R 311113103-031

DPN 1C15 L 311113104-031

3/4

DPN 1B20 R 311113150-031

DPN 1B20 L 311113151-031

DPN 1C20 R 311113153-031

DPN 1C20 L 311113154-031

1

DPN 1B25 R 311113200-031

DPN 1B25 L 311113201-031

DPN 1C25 R 311113203-031

DPN 1C25 L 311113204-031

11/4

DPN 1B32 R 311113250-031

DPN 1B32 L 311113251-031

DPN 1C32 R 311113253-031

DPN 1C32 L 311113254-031

11/2

DPN 1B40 R 311113300-031

DPN 1B40 L 311113301-031

DPN 1B40 K 011113302-001

DPN 1C40 R 311113303-031

DPN 1C40 3 511113304-031

DPN 1C40 K 011113305-001

2

DPN 1B50 R 311113350-031

DPN 1B50 L 311113351-031

DPN 1B50 K 011113352-001

DPN 1C50 R 311113353-031

DPN 1C50 L 311113354-031

DPN 1C50 K 011113355-001

3/8

DPN 1B10 R 311113050-031

DPN 1B10 L 311113051-031

DPN 1C10 R 311113053-031

DPN 1C10 L 311113054-031

for one way flow of a medium

Ø AB (NPT)D (NPT)F1F2Ø JØ K2 MO2U 1)

PGPG1SWWeight (lbs)

DN

TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.

Flanges see page 19


17

DPN2, DPNR2 DN 3/8 -2

1/4

0.7091.6730.315M 6x1

4.409

2.1261.063

3.3

3/8

0.7871.5160.217

1/8

0.370/0.3710.7684.5325.0791.9691.0634.0

1/2

1.0242.0080.311

1/4

0.495/0.4961.0045.3546.0432.6381.378

8.1

1/2

1.1022.3230.323

3/8

0.619/0.6211.1226.1976.9882.9531.49612.5

3/4

1.3782.9130.427

1/2

0.744/0.7461.3787.5048.4653.6221.85018.9

3/4

1.4963.2280.446

3/4

0.994/0.9961.4578.6829.6853.9371.92929.7

1 1/4

1.7723.8580.530

11.243/1.245

1.5359.59310.5914.9212.30344.0

1/2

DPN 215 R 31-U1113110-031-UDPN 215 L 31-U1113111-031-U

DPNR 215 R 31-U1113113-031-U

DPNR 215 L 31-U1113114-031-U

3/4

DPN 220 R 31-U1113160-031-UDPN 220 L 31-U1113161-031-U

DPNR 220 R 31-U1113163-031-U

DPNR 220 L 31-U1113164-031-U

1

DPN 225 R 31-U1113210-031-UDPN 225 L 31-U1113211-031-U

DPNR 225 R 31-U1113213-031-U

DPNR 225 L 31-U1113214-031-U

11/4

DPN 232 R 31-U1113260-031-UDPN 232 L 31-U1113261-031-U

DPNR 232 R 31-U1113263-031-U

DPNR 232 L 31-U1113264-031-U

11/2

DPN 240 R 31-U1113310-031-UDPN 240 L 31-U1113311-031-UDPN 240 K 01-U1113312-001-U

DPNR 240 R 31-U1113313-031-U

DPNR 240 L 31-U1113314-031-U

DPNR 240 K 01-U1113315-001-U

2

DPN 250 R 31-U1113360-031-UDPN 250 L 31-U1113361-031-UDPN 250 K 01-U1113362-001-U

DPNR 250 R 31-U1113363-031-U

DPNR 250 L 31-U1113364-031-U

DPNR 250 K 01-U1113365-001-U

3/8

DPN 210 R 311113060-031DPN 210 L 311113061-031

for two way flow of a mediumDPN2 for non-rotating inner pipe, DPNR2 for rotating inner pipe

C (NPT)MPV 1)W1 (NPT)W2 (bushing)XZ1 1)

Z2PG2WLWeight (lbs)

DN

TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.TypeOrder-No.

Flanges see page 19


18

3/8

1112092-2451112092-2461112095-2081112095-2061112094-2471112094-2481112069-2491112069-250

11120801112080-171

11120811112081-171

1112088-001 1112088-002 1112088-159 3511391-0013511391-0021112088-002

3511661 3511661-001

3511809 3510200-0083501000-0013501220-0013513598-0013512325-0013500576-0023502163-002

3511852

1/2

1112142-2451112142-2461112145-2081112145-2061112144-2471112144-2481112122-2491112122-2501112123-2511112123-252

35105411112130

1112130-1711112131

1112131-171

1112138-001 1112138-002 1112138-159 3511392-0013511392-0021112138-002

3511662 3511662-001

3511866 3510079-0083501001-0013501219-0013513599-0013512326-0013500576-0023502163-002

3512521

3/4

1112192-2451112192-2461112195-2081112195-2061112194-2471112194-2481112172-2491112172-2501112173-2511112173-252

35105421112180

1112180-1711112181

1112181-171

1112188-001 1112188-002 1112188-077 3511393-0013511393-0021112188-002

3511663 3511663-001

3511721 3510097-0083501002-0013501222-0013513600-0013512327-0013500516-0023500591-002

3511754

1

1112242-2451112242-2461112245-2081112245-2061112244-2471112244-2481112222-2491112222-2501112223-2511112223-252

35105431112230

1112230-1711112231

1112231-171

1112238-001 1112238-002 1112238-0813511394-0013511394-0021112238-002

3511664 3511664-001

3511929 3510148

3501003-0013501223-0013513601-0013512328-0013500516-0023500591-002

3511713

11/4

1112292-2451112292-2461112295-2081112295-2061112294-2471112294-2481112272-2491112272-2501112273-2511112273-252

35105441112280

1112280-1711112281

1112281-171

1112288-0011112288-0021112288-1593511395-0013511395-0021112288-002

3511665 3511665-001

35119473510086-0083501008-0013501205-0013513602-0013512329-0013500534-0023500533-002

3511942

11/2

1112342-2451112342-2461112345-2081112345-2061112344-2471112344-2481112322-2491112322-2501112323-2511112323-252

35105371112330

1112330-1711112331

1112331-1711112336

1112336-1631112338-001 1112338-002 1112338-159 3511396-0013511396-0021112338-002

3511666 3511666-001

35118863510087-008

35010273501241

3513603-0013512330-0013500534-0023500533-002

3512540

2

1112392-2451112392-2461112395-2081112395-2061112394-2471112394-2481112372-2491112372-2501112373-2511112373-252

35105121112380

1112380-0971112381

1112381-0971112386

1112386-1631112388-001 1112388-002 1112388-159 3511397-0013511397-0021112388-002

3511667 3511667-001

3511696 3510090-0083501030-0013501246-0013513604-0013512331-0013500586-0023500592-002

3512503

Spare Parts for types DPN1, 2, R2 – DN 3/8 -2

Execution “a” for variant -100. Please specifiy exact designation when inquiring or placing orders!

11 a22 a33 a44 a55 a5-166 a77 a

1414 a181818 a19 K19 W19 C2020 a212324252631333435

DN

Housing NHousing NCover Cover Housing connection NHousing connection NElbow P2 UElbow P2 UElbow PR2 UElbow PR2 UBushingRotor RNRotor RNRotor LNRotor LNRotor KRotor KMechanical seal EMechanical seal C Mechanical seal CCounter face KCounter face WCounter face CCompression springCompression springO-ringBall bearingCirclipCirclipScrew plugShaft sealSet screwSet screwO-ring

2

19

Journal Flanges for K Rotor Connection

DN K-flange Order-No. Inner ring Order-No. Flat pack. Ø A Ø AD Ø LK AZ x Ø KD Ø ID KB Ø K2 O EBOrder-No. Ø DB Pilot hole

1 1/2 KF 40-0 1190435 IR 40-0 1190405 3512235 1.378 4.134 3.150 4x 0.433 2.087 1.889/ 0.591 1.969/ 0.394 0.6301.891 1.970

2 KF 50-0 1190436 IR50-0 1190406 3512236 1.850 5.118 3.937 4x 0.551 2.717 2.480/ 0.591 2.559/ 0.394 0.6302.482 2.561

2 1/2 KF 65-700 1190437-700 IR 65-700 1190407-700 3512237-700 2.559 5.827 4.764 4x 0.571 3.504 2.742/ 1.024 2.841/ 0.748 1.1022.744 2.843

3 KF 75-0 1190440 IR 75-0 1190420 1190191-058 2.835 7.992 6.752 5x 0.689 3.504 3.315/ 1.220 3.437/ 1.181 1.3393.317 3.439

3 1/2 KF 80-700 1190438-700 IR 80-700 1190408-700 3512238-700 3.228 8.504 7.008 6x 0.689 4.291 3.799/ 1.260 3.937/ 1 1.3783.803 3.939

4 KF 100-700 1190439-700 IR 100-700 1190409-700 3512239-700 3.858 8.976 7.520 6x 0.689 4.724 4.295/ 1.378 4.433/ 1 1.4964.299 4.435

D 13213 us digital

Branch Offices & Service Stations:

Maier America LLC

6669 Peachtree Industrial Blvd., Suite L /MNorcross, GA 30092 - USA

+ 1-770-4 09 00 22+ 1-770-4 09 00 69

[email protected]

Maier Italia Srl

Via Enrico Toti 3I-21040 Gerenzano (VA)

+ 39-02-96 24 82 88+ 39-02-96 36 96 95

[email protected]

Maier Rotary Joints (Kunshan) Co., Ltd

No. 329 Jujin Road, Jiangsu215321 Kunshan - P. R. China

+86 512 36 85 38 30+86 512 36 85 38 31

[email protected]

�

�

�

Christian Maier GmbH & Co. KGMaschinenfabrik

Wuerzburger Straße 67-69D-89520 Heidenheim

P.O.Box 1609D-89506 Heidenheim

+ 49 (0) 73 21 / 317-0+ 49 (0) 73 21 / 317-139 (Export)

0 800 / 7 51 82 50+ 49 (0) 73 21 / 317-239

[email protected]

�

�

baureihe dp 13213us.qxd:m-da - maier heidenheim€¦ · 4 dp r 1 -100 15 -700 application data /...

Documents