baron-max 5-axis vertical machining · pdf filebaron-max® 5-axis vertical machining...
TRANSCRIPT
BARON-MAX® 5-Axis Vertical Machining Centers
5-axis profiling vertical machining centers provides a cost-effective solution for five-axis machining operations
The 5 Axis or 5 Face gives you…
• Increased flexibility • Reduced cycle times • Improved surface finish • Machining strategies improved • Enhanced controlled precision • Reduced work in progress
Industrial sectors:
Mould and die machining
Aerospace
Automotive
Power generation
Telecommunications
Medical
Continuous 5 Axis machining Increased flexibility of 5 Axis machining provides additional new machining capability to be
explored with the added advantage of improved productivity.
Heavy duty cast iron rigid construction, Rapid traverse of 30 M/min reducing idle time
The integrated trunnion table provides exceptional part clearances and larger part capacity
Repeatability accuracy of all axis 0.005 mm
5 simultaneous axis machining
FAGOR Advanced Control Technologies for 5-Axis Machining
The machines with FAGOR last generation 8065 CNC for developing
their latest 5-axis machine, the calculation algorithms of the 8065 CNC
make it possible to optimize high speed machining. This achieves
higher cutting speeds, smoother contours, better surface finish and
higher accuracy, the 8065 CNC controls RTCP machining on 5-axis
machines. The main axes and another 2 rotary axes that may be at the
spindle or on the work table. In 5-axis machining, it is common to work
with inclined planes. The 8065 offers very simple formats for Defining
inclined planes both for machines with automatic rotary axes and for
manual ones.
Technical Specifications Model TR-120/5AX TR-200/5AX TR-320/5AX Travel (mm) Longitudinal travel (X-axis) 400 mm 500 mm 600 mm
Cross travel (Y-axis) 360 mm 360 mm 550 mm
Vertical travel (Z-axis) 350 mm 350 mm 500 mm
Spindle nose to table top 200 – 550 mm 200 – 550 mm 350 -720 mm
Spindle center to column 550 mm 550 mm 640 mm
Maximum Traverse Speed Rapid traverse X-axis 30 m/min Rapid traverse Y-axis 30 m/min Rapid traverse Z-axis 30 m/min Position Accuracy X, Y & Z ±0.005 mm (±0.0002”) Repeatability Accuracy X, Y & Z ±0.0025 mm (±0.0001”) Guide Way (Roller Guide Way) X-axis (Roller Guide Way ) 2 x 30 mm 2 x 35 mm
Y-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm
Z-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm
Lubricator Lubricator WAY LUBE 68 Ball Screw Diameter & pitch X-Y-Z 32 mm x pitch 10mm 40mm x pitch 10mm
Tool (40 taper) ARM Type Number of Tools 24 Tools 24 Tools
ATC Type Swing Arm Swing Arm
Tool Selection Bi-directional Bi-directional
Maximum Length 250 mm 300 mm Maximum Diameter 80mm 80mm Maximum Each Tool Weight 6 Kg 7 Kg Tool Change Time (T - T) 2 second 2 second Tool Change Time (C - C) 4 second 4 second Spindle Spindle Taper 30 or 40 40
Spindle speed 10000 rpm (std), 12000/18000 rpm(opt)
Spindle Motor 5.5/7.5 KW 7.5/11 KW
Air Supply Required 7Kg / square cm Power Supply Required 25 KVA 32 KVA(std), 45 KVA (option)
Machine Weight 3800kgs 4200 kgs 7000 kgs
Machine Dimension For Shipping 245*228*250 cm 300*228*255cm 337*228*255 cm
Tilt Rotary Table Specifications Work Table Diameter (mm) Ø120 Ø200 Ø 320
Center Bore Diameter (mm) Ø 30H7 Ø 30H7 Ø 110H7
Over all Height in Vertical (mm) 255 mm 340 mm 440 mm
Table center Height in Vertical (mm) 150 mm 210 mm 255 mm
Width Of T-Slot (mm) 10H7 12H7 12H7
Width Of Guide Block (mm) 14H7 18H7 18H7
Transmission Ratio 1 : 72 (Rotary),
1 : 120 (Tilt)
1 : 90 (Rotary),
1 : 120 (Tilt)
1 : 180 (Rotary),
1 : 180 (Tilt)
Indexing Resolution (deg.) 0.001° 0.001° 0.001°
Tilting Angle Range -20°~110° -110° ~ 110° -110° ~ 110°
Maximum Rotation Speed (min-1) 27.8 rpm (Rotary)
16.7 rpm (Tilt)
22.2 rpm (Rotary)
11.1 rpm (Tilt)
11.1 rpm (Rotary)
5.6 rpm (Tilt)
Load capacity (vertical / horizontal) 20Kg / 35Kg 50Kg / 100Kg 100Kg / 200Kg
Indexing Accuracy (sec.) 30" Rotary 25" Rotary 15" Rotary
60" Tilt 50" Tilt 30" Tilt
Repeatability (sec.) 4" Rotary 4" Rotary 4" Rotary
8" Tilt 8" Tilt 8" Tilt
Specifications are subject to change without notice
Standard Accessories BT/CAT/DIN-30/40 Auger type chip conveyor
High Speed Servo System Standard Spindle 10000rpm
Electrical Cabinet with Heat Exchanger Chip Flushing System + Water Gun
RS232 Interface Spindle Coolant Nozzle System
Work Light Spindle Air Blast
Alarm Lamp Lubrication System
Tool Box & Tools Auto Power Off System
Leveling Blocks & Bolts Portable Hand Wheel (MPG)
Fully Enclosed Splash Guard Operation Manual, Maintenance Manual
Rigid Tapping Test Report In CD Format
Optional Accessories Spindle Direct Drive (rpm) 12000, 15000
Spindle Built-in 24000, 30000
Chip Conveyor System Belt Type / Scrapper Type
Coolant Through Spindle (CTS) 20 bar or 50 bar
Linear Scale FAGOR
Oil Skimmer / Separator Available
Tool offset Probe
BARON-MAX® MACHINE TOOLS Since 1976
KOAN CHO MACHINERY CO., LTD. P.O. Box 20 – 30 Taichung, Taiwan, R.O.C
No. 217 Tatun 7th Street, Taichung, Taiwan, R.O.C Tel: 886-4-2475-9927, 2475-9981. Fax: 886-4-2475-9936, 2475-9939
E-mail: [email protected] http://www.baronmax.com