banner pencil case
TRANSCRIPT
A simple sewing project which recycles old
banners into attractive pencil cases – carry your
creative tools in an equally creative case!
Banner Pencil Case
Instructables by Biji-biji Initiative
Banner Pencil Case
Instructables by Biji-biji Initiative
Materials List
and a sewing machine of course !
• Measuring Tape/ Ruler• Marking chalk/ Ink marker• Scissors• Cutter• Nylon thread• Ruler• Used banner• Zipper – 12”• Lining cloth.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 1
• Take a rectangular piece of used banner.
• Mark and cut a piece measuring 28 cm X 25 cm.
Tip – Add 4 cm to actual width and 3 cm to actual length of the pencil case. .
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 2
• Fold the edge of shorter side of the piece and stitch it.
• Repeat this until all four sides are done.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 3
• Attach the lining material to the
banner piece and stitch all around as shown.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 4
• After the sides are done, attach the zipper to one edge.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 5
• Next attach the zipper to the other edge also.
• It will look as shown.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 6
• Stitch on the sides also.
• Trim the edges as shown.
Banner Pencil Case
Instructables by Biji-biji Initiative
STEP - 7
• Invert the pencil case.
• Use the sharp point of scissors to push out corners.
• This will help to make the corners sharp and straight.
Banner Pencil Case
Instructables by Biji-biji Initiative
The pencil case is ready!