bangladesh shilpa bank

55
View with images and charts Loan Operations Analysis & Evaluation: Bangladesh Shilpa Bank Background of Bsb Non-Bengali entrepreneurs and the public sector nearly monopolized economic activity in the Pakistan era. Of the very few business professionals are active in East Pakistan fewer yet survived after the war. Post independence Bangladesh therefore presented a unique set of opportunities and problems for the private sector. The good news was that without the stranglehold of the elite Pakistan business family the field was wide open for the development of a homegrown Bengali private sector, but that both a capital base and an entirely new entrepreneurial class would have to be developed out of an economic vacuum. Capital formation rapidly occurred and the newly nationalized banks found themselves with serious asset management problem because there were few professional entrepreneurial risk takers with business skills and proven track records to which this capital could be made available under normal and prudent banking practice. Under this sort of circumstances, the former Industrial Development Bank of Pakistan (IDBP) and the Equity Participation Fund (EDF) both of which were established for the industrial development of Pakistan were converted into single institution named Bangladesh Shilpa Bank. Bangladesh Shilpa Bank comes into existence on October 31, 1972 by the Promulgation of Bangladesh Shilpa Bank order 1972 (president’s order no 129 of 1972). The BSB order, 1972 was amended subsequently by the parliament to provide more operational autonomy to its management. The main objective of BSB is to provide finance both in local and foreign currencies for establishment of new industrial projects as well as balancing, modernization, replacement and expansion of existing industrial units in Bangladesh both in private and public sectors. It provides other types of

Upload: regan-rose

Post on 13-Mar-2016

235 views

Category:

Documents


1 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Bangladesh Shilpa Bank

View with images and charts

Loan Operations Analysis & Evaluation: Bangladesh Shilpa Bank

Background of Bsb

Non-Bengali entrepreneurs and the public sector nearly monopolized economic activity in the Pakistan era. Of the very few business professionals are active in East Pakistan fewer yet survived after the war. Post independence Bangladesh therefore presented a unique set of opportunities and problems for the private sector. The good news was that without the stranglehold of the elite Pakistan business family the field was wide open for the development of a homegrown Bengali private sector, but that both a capital base and an entirely new entrepreneurial class would have to be developed out of an economic vacuum.

Capital formation rapidly occurred and the newly nationalized banks found themselves with serious asset management problem because there were few professional entrepreneurial risk takers with business skills and proven track records to which this capital could be made available under normal and prudent banking practice.

Under this sort of circumstances, the former Industrial Development Bank of Pakistan (IDBP) and the Equity Participation Fund (EDF) both of which were established for the industrial development of Pakistan were converted into single institution named Bangladesh Shilpa Bank. Bangladesh Shilpa Bank comes into existence on October 31, 1972 by the Promulgation of Bangladesh Shilpa Bank order 1972 (president’s order no 129 of 1972). The BSB order, 1972 was amended subsequently by the parliament to provide more operational autonomy to its management.

The main objective of BSB is to provide finance both in local and foreign currencies for establishment of new industrial projects as well as balancing, modernization, replacement and expansion of existing industrial units in Bangladesh both in private and public sectors. It provides other types of financial assistances like guarantees for credit/loans; equity support and working capital loan to BSB financed projects.

INSTITUTIONAL OVERVIEWINSTITUTIONAL OVERVIEW

Bangladesh Shilpa Bank comes into existence on October 31, 1972 by the Promulgation of Bangladesh Shilpa Bank order 1972. The head office of this institution is in Dhaka. Presently, Bangladesh Shilpa Bank has five divisions, twenty-one departments, three zonal offices and fifteen branch offices. Total number of employees of the organization is 794, as on the date up to June 30, 2004.

ORGANIZATION & ITS CAPITAL STRUCTURE AND SOURCES OF FINANCE

Table – 01Table – 01

Established :  October 31, 1972    Organization :  Head Office -  Dhaka

     Division -  5     Department -  21

Page 2: Bangladesh Shilpa Bank

     Zonal Office -  3     Branch Office -  15     Manpower -  794Capital Structure:         Authorized :  TK. 2,000 million    Paid-up :  TK. 1,320 million    

Authorized capital of Bangladesh Shilpa Bank is Tk.. 2000 million and the amount of paid up capital Tk.. 1320 million. Other sources of Bank’s fund are the Government, Bangladesh Bank, Commercial Banks, local/overseas financial institutions and suppliers’ credit. At least fifty one percent of the authorized capital of Bangladesh Shilpa Bank must be subscribed by the government and remaining forty nine percent may be subscribed Bangladeshi nationals or by financial institutions local or foreign. Presently, 100 percent ownership of the bank belongs to the government OWNERSHIPOWNERSHIP

At least the government subscribes 51% of the authorized capital of BSB and the remaining 49% is subscribed by Bangladeshi Nationals or by local or foreign financial institutions. Presently, 100% ownership of the bank belongs to the Government.

ZONAL & BRANCHES OFFICES OF BSB ZONAL & BRANCHES OFFICES OF BSB

Page 3: Bangladesh Shilpa Bank

MISSION OF BSBMISSION OF BSBBangladesh Shilpa Bank (BSB) is the state owned Leading Development Financial Institution (DFI) of Bangladesh. 'Shilpa' means industry. BSB provides financial and technical assistance to broaden the private as well as public sectors industrial base of the country. It prioritizes, especially, Export Oriented/Export Linkage industrial units, Efficient Import Substitution, Joint Ventures, Commercialization of local technology and promotion of agro-based industry.

MANAGEMENTMANAGEMENT

The overall policy formulation and the general direction of Banks operation vests in a board of directors appointed by the Government. This Board of Directors consists of 9(nine) members including the Chairman and the Managing Director. Non-Governments shareholders subscribing to the capital of the bank shall eventually elect 4 directors from amongst themselves. The Managing Directors is the chief executives of Bank. The General Managers assist the Managing Director in conducting the overall banking business.

FUNCTIONSFUNCTIONS

BSB extends term loan facilities in local and foreign currencies to industrial projects (both new and BMRE) in the private and public sectors. Besides Bank also performs the following activities:

Provides working capital loans to industrial projects;

Provides equity support in the form of underwriting and bridge finance to public limited companies

Issues guarantees on behalf of borrowers for repayment of loan;

Extend commercials banking services along with deposit mobilization;

Purchases and sales shares/securities for BSB and on behalf of customers as member of Dhaka Stock Exchange (DSE) Ltd. and Chittagong Stock Exchange (CSE) Ltd. for capital market development; and

Conducts projects promotional activities along with preparation of various sub-sectoral study reports

INTEREST RATE ON BSB LOAN

In BSB interest rate is not same in all sectors. There are differences in interest rate. Export oriented industries are charged 9% interest rate. Agro based industries, small & cottage industries, large & medium industries are charged 10% interest rate in case of long-term loan. In Export loan interest rate starts from 7% to 11% from different case. On the other hand, in commercial, bridge & other loans interest rate starts from 10% to 14.50%.

DIFFERENT FUNCTIONAL DEPARTMENTS OF BANGLADESH SHILPA BANK DIFFERENT FUNCTIONAL DEPARTMENTS OF BANGLADESH SHILPA BANK

There are eight functional departments of Bangladesh Shilpa Bank. The operational activities of Bangladesh Shilpa Bank have operated by these departments in different way. Every

Page 4: Bangladesh Shilpa Bank

department has its own policies, procedure, and strategy to lending, and implementing credit. Each of the department is depends on each other for sanctioning loan for propose industries, which applied for loan. Loan Operation Department is the first step of loan sanction procedure and it is comparatively most important department of Bangladesh Shilpa Bank.

1. Loan Operation Department 2. Project Implementation Department 3. Human Resource Management Department 4. Law Department 5. Loan Accounting Department 6. Project Rehabilitation Department 7. Central Recovery Department 8. Documentation and Machineries Procurement Department

10A LOAN OPERATION DEPARTMENT10A LOAN OPERATION DEPARTMENT

Bangladesh Shilpa Bank (BSB) grants loan on the basis of certain criteria. The loan operation department does the first activities of loan granting. Any entrepreneur who wants to borrow money, from Bangladesh Shilpa Bank must fulfill at first Bank Standard Questionnaire Form (BSQF) in terms of Tk. 1,000.

Functions of Loan Operation Department:Functions of Loan Operation Department:i. At first an application form is supplied to the entrepreneur (required Tk. 1,000), after the

entrepreneur submits filling up the application form. After filling up the application form it is submitted by the entrepreneur. A project appraisal letter is supplied by the entrepreneur

ii. To give advice to the entrepreneur about industrial investment. To give loan from and to appraise the proposed project from various aspects- Management & organizational appraisal, technical appraisal, marketing appraisal, economic appraisal & financial appraisal.

iii. To take clearance from privatization board for proposed project, if necessary.iv. To take necessary action to process and approve co-financing projectv. Loan sanction letter send to subsequent department

vi. To take necessary action to implement the projectvii. Re-evaluate the project on the basis of past evaluated loan agreement if necessary,

according to the updated informationviii. To issue gazette notification about loan procedure on behalf of government

ix. To examine and appraise the joint venture proposal of Bangladeshi and foreign investorsx. Advise about preparation of loan application form to non-resident people of Bangladesh

xi. To encourage foreign lease-financing organization who provide equipment and new technology to set up business in our country.

xii. Keeping of non-resident Bangladeshi and joint investment guarantee statement preparation, memorandum and approved letter

xiii. To evaluate and give opinion about zonal office sanctioning loan and their lending activities

xiv. After analyzing the project appraisal, the board decides the loan should be sanctioned or not;

xv. If the loan is sanctioned it is forwarded to the project implementation department.

10B PROJECT IMPLEMENTATION DEPARTMENT10B PROJECT IMPLEMENTATION DEPARTMENT

Page 5: Bangladesh Shilpa Bank

When the loan operation department it is forwarded to project sanctions the loan implementation department (PID) performs the following activities:

i. Undertaking necessary initiative after granting loan in favor of the project. ii. Taking necessary action to make the factory lay-out.

iii. Making necessary adjustment in case of change of the project place, change of board of directions and change/extension product mix etc.

iv. Making necessary attempt to give the loan a stage by stage after the loan granting. v. To ensure that necessary capital has been supplied by the entrepreneur and to ensure its

proper utilization. vi. To give necessary assistance in the case of Bridge loan from any financial institution.

vii. Taking necessary indicatives to construct the lay-out of the project according to construction cycle.

i. Monitoring the machinery of the project, inspection and taking any kind of advice regarding to any machine related problem from machinery department.

ii. Verification of new material process of project ensuring the cash capital according to the loan terms and condition and providing necessary assistance in this matter.

iii. Inspection and monitoring experimental production extension of loan period.iv. Making the final construction report (FCR) and transferring it to central recovery

department (CRD) and concerned department/authorities.v. Determination of the construction period of the project preparing loan repayment

schedule and taking after necessary action regarding this. vi. Monitoring and inspecting the project to see whether the project is implementing

according to time schedule and taking necessary initiatives to solve any kind of problem arising out there form and providing necessary advice to the entrepreneur.

vii. Receiving insurance letter against the predetermined risk of the implementation project assets n ensuring its deposit to bank.

viii. Inspection of the utility of the principles regarding the project implementation and presiding up to date principles.

10C DOCUMENTATION AND MACHINERY PROCUREMENT DEEPARTMENT10C DOCUMENTATION AND MACHINERY PROCUREMENT DEEPARTMENTAfter sanctioning loan by Loan Operation Department, it issues a letter to documentation department, parities and after concerned departments. The documentation department issues a letter to the parties to produce necessary documents.

Functions of Machinery Procurement & Documentation DepartmentFunctions of Machinery Procurement & Documentation Department1. Documentation schedule preparation/selection and approving for tender2. To assist the promoters to invite tender and other formalities3. Give advice to investor’s/entrepreneurs about tender invitation to collect project

machinery4. To analyze the tender price, quality of machinery among the bidders and taking

approval from the authority5. Documentation and contract completion with loan recovery after loan sanction6. Examination of project memorandum and statement of affairs

.10D CENTRAL RECOVERY DEPARTMENT.10D CENTRAL RECOVERY DEPARTMENTProject implementation department make a repayment schedule and given it to the borrower. Normally the interval is 6 months. This department inspects the project after every 6 months to see whether there is any leakage. If the borrower fails to repay the loan as the application of the borrower it is rescheduled. Sometimes a portion of interest is exempted. If the borrower fails to repay the loan than it is transferred to law department to take legal action on

Page 6: Bangladesh Shilpa Bank

the application of the borrower. Sometime the project is transferred to project Rehabilitation Department to restore the project.

10E LOAN ACCOUNTING DEPARTMENT10E LOAN ACCOUNTING DEPARTMENT

Loan Accounting Department is the department, which centrally maintains all loan amounts of the bank. There are 4 sections, which performs the activities of the department. 1. Not due section: Not due is the installment not yet due for payment in schedule time fixed

by the project department/Branch officer.2. Amount due section/overdue section: The payment of installment and interest in not

paid/cleared in time is overdue. The functions of this section are:

a. Accurately list of balance preparationb. Advice sending to borrowerc. Quarter/half year by interest charge.

3. Replacement section: When the overdue is rephrased or waived then the replacement section will do the needful activities.

4. General and policy section:General and policy section do the following:

a. To prepare the monthly Trial balance.b. Monthly recovery statement.c. Monthly disbursement schedule d. To make entry all the transaction as per daily statement received from the branch

officer. e. All list of balances of not due send to the Head Office and branch Office.f. To prepare distribution of work among the officers and staff as specific guidelines

of the authorities.

10F LAW DEPARTMENT 10F LAW DEPARTMENT

If the Bangladesh Shilpa Bank fails to recover its loan in the normal way; it must take alternative action and file case in the court.

Legal action taken during the year 2003-2005

Position of projects under litigation 2003-2004 2004-2005Number of projects Number of projects

Legal notice issued 126 33Filling of suit 205 23Cases settled outside the court 6 11Auction 2 11

10G HUMAN RESOURCE MANAGEMENT DEPARTMENT 10G HUMAN RESOURCE MANAGEMENT DEPARTMENT

Page 7: Bangladesh Shilpa Bank

The department of Human Resource Management was not it name as now. Modernizing the structure of the administration of the bank and development the skill of the human resources and reducing operating cost of the organization. The director’s 244th meeting was conducted on 23rd April 1996. In this meeting, rename of the Administration Department as “Administration & Human Resources Department” and Department of Labor as “Department of Human Resources Management”.There are five sections in this department

SL. NO. Section Activities01 General administration & policy section 1. Fixing principle relating to

human resources activities/position

2. Fixing principle relating to organization

3. Fixing principles relating to delegation of power

4. Activities relating to trade union

02 Management section 1. Provide employment policy2. Provide transfer policy3. Provide promotion policy4. Fixing pay scale5. Fixing annual increment policy

03 Disciplinary section Mitigate the compliant against personnel

04 Welfare section 1. Provide scholarship policy2. Assist the helpless personnel3. Provide retirement benefit

05 Leave & medical section 1. Provide medical facility & allowance

2. Provide vacation opportunities3. Provide conveyance facility &

allowance

10H PROJECT REHABILITATION DEPARTMENT10H PROJECT REHABILITATION DEPARTMENT

The objective of BSB is to stimulate industrialization of the country. But many of the projects, which are loaned by BSB, become sick and cannot carry on their projects. There are many reasons, so government tries to revive the proposed project for greater advancement of the country.

Page 8: Bangladesh Shilpa Bank

In these types of cases, BSB provides assistance to rebuild their structure to restart their businesses. Additional financial assistance may be required moreover, more information and advice may given so that the entrepreneur may run the business more efficiently, sufficient return & contribution to the economy.

Functions of Project Rehabilitation Department1. Recommendation and taking to rehabilitate a project after tracing the cause of

sickness if the files are transferred to Project Rehabilitation Department from the ensured department/ branch/ zonal office after the primary analysis of the project. The rehabilitation process starts after the recommendation of the advisory committee formed by the General Managers.

2. The files of the projects are transferred to Law Department to take necessary actions, which are deemed not to be rehabilitated. Again if there is no opportunity to rehabilitate any it also rejected.

3. Verification of the proposal regarding rehabilitation recommendation preparing the implementation schedule and taking necessary initiatives to take care the project and deciding the single or joint management system of the bank and performing other activities regarding these.

4. Production of the rehabilitated project, making of the products analysis the targeted loan recovery and actual situation and taking necessary initiates regarding these

ACCORDING TO RESEARCH PAPER OF BANGLADESH INSTITUTE OF ACCORDING TO RESEARCH PAPER OF BANGLADESH INSTITUTE OF DEVELOPMENT STUDIES (BIDS)DEVELOPMENT STUDIES (BIDS) ON SICK INDUSTRYON SICK INDUSTRY

Sickness in the industrial units is not a new phenomenon as is evident in the developing countries. Even in the industrially advanced countries of the world, varying degrees of sickness are found to occur. An industrial unit may face a number of odds during its implementation and operation stage because of a number of factors in the environment – internal and external. If the problems perpetuate & does not permit the unit to pursue the normal course of operations leading to reasonable utilization of capacity, generation of surplus, debt servicing, etc, it can be presumed that some kind of sickness has engulfed the unit and if this trend grows unchecked, it would adversely affect production and employment in the country besides other socio-economic repercussions. However, it is also recognized that in a market economy, the survival of the fittest and weeding out of inefficient industrial units is a natural outcome, which is considered useful as well because the exit of the non-competitive and loss-incurring units should not pose difficulty to any society. But sickness assuming an epidemic shape creates concerns to the policy makers and stakeholders. Experience suggests that small-scale industries are more prone to sickness as compared to medium and large-scale industries. In this context, sickness in small industry should not be left only to the market forces. Creation of objective conditions and enabling environment through suitable policy support are essential for sustained growth of the small industry sector in the developing economies. It is, therefore, imperative to diagnose the causes of sickness so that preventive measures are suggested. Even if a small unit turns sick despite taking all possible precautionary measures, efforts should be made to find out the possibility of its revival. This warrants appropriate package of restructuring and rehabilitation strategies. If the unit’s survival is still under threat, it should be better allowed to die a natural death.

Page 9: Bangladesh Shilpa Bank

The researchers have shown the incidence of sickness and causes thereof in the industry sector of Bangladesh with particular reference to small industry sub-sector and suggest policy measures, both preventive and corrective, to address the problem of sick industries in the backdrop of pursuing the rapid industrialization strategy as the major prop for acceleration of economic growth in their paper. For this purpose, extensive survey of literature has been made and relevant Govt. publications, pervious studies and various initiatives taken by the successive Governments have been consulted. Section–II presents the industrial scenario in Bangladesh, Section-III highlights the role of small industries in the economy and polices pursued, Section-IV brings out the sickness syndrome prevailing in the industrial sector of Bangladesh, industrial sickness in neighboring countries is briefly described in Section – V, and Section-VI deals with the suggested policy framework for prevention of industrial sickness and rehabilitation measures.

SICKNESS SYNDROME IN THE INDUSTRY SECTOR OF BANGLADESH:SICKNESS SYNDROME IN THE INDUSTRY SECTOR OF BANGLADESH: CHRONOLOGY OF GOVT. INITIATIVES AND VARIOUS STUDIESCHRONOLOGY OF GOVT. INITIATIVES AND VARIOUS STUDIES

In this section the researchers have shown the industrial sicknesses and its incidence in Bangladesh.

They said that Sick industries refer to those units, which perform poorly against expected results, incurs cash losses for consecutive years, gradually erode the entire net worth and obviously fail to service the debt obligations.

They think that the following major criteria are used to identify a sick unit-

A unit incurring financial loss/not being capable to produce at / above break-even point

A unit incurring continuous cash losses

A unit having negative equity

A unit having excess of current liabilities over current assets

A unit making defaults in payment of principal sums with interest.

A unit having low capacity utilization

A unit having worsening debt-equity ratio

They also observed that it is very difficult to recognize sick units on some definite criteria as a wide variety of interlinked symptoms characterize the sickness of a unit. Likewise, a number of causes are responsible for turning an industrial unit as sick. These causes prevailing simultaneously in a unit may be closely inter-related or even independent of each other. Some of the causes originate outside the unit (e.g. changes in the structural and environmental factors like infrastructural problem, govt. policies, etc.) and some crop up within the unit itself that relate to the functional areas like management, production, finance etc.

BIDS also made a comprehensive study on sick Industries in 2005. This study based on Ministry of Industry (MOI) data reveals that the highest incidence of sickness is as follows-

Page 10: Bangladesh Shilpa Bank

Sectors % of sickness

The manufacturing of textiles 19.6%

The sub-sectors-food manufacturing 14.3%

Non-electrical machinery 5.7%

Leather and its products 5.4%

It appears from the study that ‘small scale’ industries is at the top (72.5%) in terms of incidence of sickness, followed by "medium" and "large" scale industries – 19.7% and 4.1% respectively.

From the enterprise level survey of the study they found that among the internal factors causing industrial sickness, the entrepreneurs have singled out use of obsolete technology as the most important one (23%) followed by faulty employee appointment (15%), lack of working capital (13%), marketing problem (11%), poor management (9%), and wrong feasibility (5%). Among the external factors, lack of working capital has been mentioned as the single most important cause (35%) followed by natural calamities (13%), trade liberalization (9%), problems in disbursement of project loan (7.5%), poor infrastructure/utilities (7%), political unrest (5%), and smuggling (3%).

They have also identified some causes of Industrial Sickness and suggested policy measures for Prevention and Rehabilitation. They classified the causes into two categories:

(I) External causes (exogenous factors)

The external causes, which are beyond the control of the industrial unit, usually affect the industry group as a whole.

(II) Internal causes (endogenous factors)

Internal causes occur due to some intra-firm weaknesses in various functional areas of the unit and are, therefore, management related:

A. INTERNAL

SL. Broad Area Detail Causes

01. Managementa. Lack of proper education, training, experience and business

outlook of the Sponsors/Entrepreneurs b. Poor Entrepreneurial skills c. Poor Management d. Poor Equity base e. Lack of Integrity/Division of Funds

f. Faulty Project Planning and Appraisal

Page 11: Bangladesh Shilpa Bank

02. Production/ Technical

a. Wrong choice of technology b. Improper utilization of production capacity c. Imbalanced and Defective Machinery d. Poor Raw-material Planning e. Inadequate Quality Control f. Poor labor relations

g. Location problem

03. Marketinga. Lack of Market Planning b. Inadequate Market Survey c. Poor Collections

d. Defective Pricing

04. Financea. Poor Management of Financial Resources b. Delay in Mobilization of Equity Funds c. Faulty Costing d. Adverse debt-equity combination

e. Lack of Proper Accounting system

05. Personnela. Lack of Competence b. Lack of Loyalty

c. Lack of Professionalism

B. EXTERNAL

SL. Broad Area Detail Causes

01. Govt. Policy & Implementation

a. Frequent Policy changes b. Lack of Proper Implementation of Industrial Policies c. Liberal Import Policies d. Poor Infrastructure / Frequent Power Disruption e. Smuggling f. Fiscal Anomalies g. Exchange Rate Fluctuation h. Lack of Co-ordination between various ministries and Govt.

Departments, etc. i. Over-Saturation of particular industry type / Sector due to

wrong policy

j. Non-availability of Raw-material, etc.

02. Bank & Financial Institutions

a. Non-availability/Inadequacy of Working Capital b. Lack of required financial assistance for BMRE c. High rate of Interest on bank loan

d. Lack of timely decision & support by the banks and financial institutions.

Page 12: Bangladesh Shilpa Bank

03. Environmenta. Political Unrest b. Labor Unrest c. Market Recession

d. Delay in Project Implementation a) PREVENTIVE MEASURES

They have shown that small industrial units fall sick much to the occurrence of external causes while medium and large industries get exposed to sickness largely due to internal causes. Though it would be hardly impossible to eliminate the causes altogether, attempts should be made to undertake measures that would reduce the magnitude of ailment in the industrial units for healthy survival and growth. So, they have suggested to take the following measures to prevent industrial sickness:

1. Macro-economic Policy changes:

The industrial entrepreneurs should make their own appraisal within a predictable macro-economic environment. For this, policy changes should not be abrupt, have to be pre-announced and gradual.

2. Sub-Sector wise Long term Policy:

For each sub-sector, the long-term policy (e.g. for a period of 5 years) should be announced by the Government so that entrepreneurs’ appraisal of the policy implications do take a near-accurate shape.

3. Implementation of the Announced Polices:

There should be effective co-ordination amongst the various ministries, Govt. Departments and relevant agencies involved for proper implementation of policies related to industrialization.

4. Development of Small industry Sector:

The small industry sector is characterized by low-level of technology, low equity base, traditional management practices, poor marketing outlets and undeveloped sub-contracting arrangement. The small industries should not be left to the market forces only. The following measures may be taken for preventing sickness in the small-scale sector:

Arranging access to institutional credit at reasonably lower rate of interest.

Industrial Estates equipped with the required facilities should be set up in suitable locations.

Entrepreneurship and Technology training should be arranged and then linked with the provision of credit facilities. A national level training institute for entrepreneurship development in the small-scale sector should be set up. Meanwhile, BSCIC Training Institute and DCCI Business Institute may be strengthened for up gradation of capability of the existing entrepreneurs.

Page 13: Bangladesh Shilpa Bank

Establishing complimentary relationship with the medium and large industries should make sub-contracting arrangements. Government supplies may be procured from small industries as far as possible.

Data Bank should be developed at the Chamber Bodies/BOI/BSCIC to facilitate the adequate flow of market-related information.

There may be one marketing agency entrusted with the responsibility of purchasing all goods manufactured by SSI units (Say, up to Tk. 10 million investment) and the task of channeling sales through various sales depots.

5. Rationalization of Tariff:

In cases where deemed necessary, some protective measures should be taken by restricting import of the locally produced finished goods so that fiscal anomalies could be removed.

6. Improvement of Infrastructural Facilities:

Insfrstructural facilities including utilities should be made available to the entrepreneurs at low cost and at the appropriate time.

7. Monitoring of Saturation in Particular industry Sub-sector:

There should be some agency entrusted with the task of monitoring the establishment of too many units in the same sub-sector so that over-crowding could be prevented.

8. Development of Linkage Industries:

In order to mitigate the problem of non-availability/scarcity of raw material as well as marketing of finished goods, backward and forward linkage industries should be set up in a planned way. Moreover, close linkage of industry with agriculture will help ease problem of scarcity of raw material.

9. Active Support of Banks and Financial Institutions:

In case of industrial units where term loan is needed, the availability of working capital should be ensured as part of the financial package.

Banks should provide due attention to process the working capital needs of the industrial units without any delay.

The banks and financial institutions should actively consider BMRE Loan for the existing industrial units undergoing the reality of rapid change in technology so that productive capacities are not rendered idle/underutilized.

Interest rate on loan should be made lower by improving operational efficiency of the banks. This will help reduce financial costs of the industrial units and thus gain access to competitiveness.

Page 14: Bangladesh Shilpa Bank

Bank-client relationship should be based on understanding of the mutual problems and prospects for greater interest of survival of both the entities.

Banks should improve the quality of project appraisal in order to prevent the growth of born- sick projects and for that, availability of adequate and accurate data and skilled manpower have to be ensured.

Banks could fix up a time limit for sanction and disbursement of loan limits for helping timely implementation of the projects/utilization of capacity of the borrowing industrial units.

Monitoring system of the projects financed by the banks should be thoroughly intensive and for this, both off-site and on-site mechanisms should be used in conjunction with each other in order to take timely steps for prevention of sickness.

Educated entrepreneurs with technical know-how should be encouraged to set up industrial units. They should be provided with all possible support, both financial and non-financial without emphasis on collateral.

10. Expansion of Market Base through Increased Exports:

Domestic market is gradually getting squeezed due to the influx of officially imported foreign goods and smuggled goods. On the one hand, increasing the number of exportable products should expand export market. On the other, anti-smuggling drive should be strengthened. For this, import policy should be restructured in a way that discourages smuggling to a great extent.

11. Use of Predictive Models:

Banks and entrepreneurs should follow some predictive models for early detection of sickness on the basis of evaluation of financial health of the industrial units.

12. Facilitation of Enabling Environment

Deterioration of Law and Order, extortion, harassment etc. should be checked at any cost. In case of natural calamities, special assistance should be provided for resilience.

b) REMEDIAL MEASURES

They also suggested the following measures for the industrial units approaching towards sickness and already turned are as follows:

(i) Every bank and financial institution should have a "Project Rehabilitation Cell" manned by the experts of various disciplines. There should be ongoing process of evaluation of the heath of the assisted units by the banks to detect early warning signals. For this, congenial bank-client relationship is a must for extending co-operation to each other.

Genuine sick units capable of being revived should be allowed rehabilitation package by way of rescheduling of existing loans, waiver/remission of interest payments,

Page 15: Bangladesh Shilpa Bank

conversion of short-term liabilities into long term obligations, etc. depending on the merit of the each case.

There might be one "Interest Remission Committee" to be formed by the Govt. from time to time to address the genuine problems of small sick units (where investment ceiling may be up to Tk. 1 crore). However, this step should not encourage the non- sick units to avail of this temporary facility. The screening process should be strict enough to select the genuine sick units for such concession. As it was followed previously, the Govt. may compensate up to 50% of the waived interest to the concerned banks.

If necessary, change of management of the sick units should be brought in to facilitate successful running of the projects.

Only financial and management rehabilitations of the sick units will not bring the desired result unless Govt. assistance in the form of reduced taxes, duties, concessions on various charges like gas, electricity, etc., imposition of restriction on related import items etc are made available.

Bangladesh Bank may set up a sick industry Cell to monitor the performance of the lending institutions in handling the problems of sick units and to co-ordinate the rehabilitation efforts of banks, financial institutions, Govt. and other agencies involved.

Possibilities of mergers and acquisitions may be explored in case of sick industrial units not capable of being revived by their own strengths. Suitable policy guidelines may be framed in this regard.

SOEs found chronically sick should not be allowed to operate in the limping state any further. In case of sick SOEs capable of being revived, disinvestments process may be expedited.

3.3 STUDIES ON SUB-SECTORAL/ENTERPRISE LEVEL SICKNESS3.3 STUDIES ON SUB-SECTORAL/ENTERPRISE LEVEL SICKNESS

Mr. Saha, Head of Research Division of Depository Financial Institution (DFI) (1997) carried out a research work on industrial sickness of the DFI- financed projects in Bangladesh.

He identified the following principal causes are responsible for the sickness of DFI-financed projects:

i. Internal:

i. Marketing problem (31%) ii. Management inefficiency and lack of entrepreneurial skills (22%)

iii. Faulty project planning and appraisal (14%) iv. Imbalance of machinery and inappropriate technology (12%) v. Implementation delay in (mobilization of equity, etc) (12%)

vi. Others (diversion of funds, labor problem, etc.) (9%) ii. External:

i. Delays in loan sanction and disbursement (22%) ii. Non- availability/ shortage of working capital (21%)

Page 16: Bangladesh Shilpa Bank

iii. Power problem (15%) iv. Changes in Govt. policy (import liberalization) (13%) v. Non-availability/ irregular supply of raw material and other critical inputs

(11%) vi. Natural calamities (57%)

vii. Smuggling, Political unrest (5%) viii. Others (8%)

He found out the following important findings of the study:

Most of the sick projects (64%) were established during the 1980s’

Average capacity utilization of the sick projects was 41%

Working capital finance gap (difference between the required working capital and available working capital) prevailed within the range of 21-80%. for 76.48% of the sample sick projects.

MINISTRY OF INDUSTRY (MOI) - SPONSORED SICKNESS STUDY BY THEMINISTRY OF INDUSTRY (MOI) - SPONSORED SICKNESS STUDY BY THE HOUSE OF CONSULTANTS LTD.HOUSE OF CONSULTANTS LTD.

In 1988, under the sponsorship of Ministry of Industries (MOI), Government of Bangladesh (GOB), the House of Consultants Ltd. undertook a study to develop criteria and identify the causes of sickness of manufacturing establishments in Bangladesh and find solutions to remove or at least reduce the impact of the causes. According to the study, an industrial unit has been defined to be sick if it fails to cover all the costs of production (including finance cost) and earn normal profit in the long run (i.e., a three – year period). A set of criteria was developed for the study in order to identify an industrial unit as sick which are as follows:

If it incurs net loss in consecutive years,

If its debt-equity ratio deteriorates over time (net loss wiping out the equity base),

If it fails to meet debt-servicing liabilities on time,

If it defaulted in payment of past taxes,

If its share price is going down (in case of public limited companies listed in the stock exchange),

If it is facing working capital problem and its cash ratio is declining over time (creating liquidity problem).

By applying the above criteria to a sample of 300 industrial units, it was found that 67.3% were sick in terms of one or more criteria. The extent of sickness is the highest i.e., 75.8% among the small-scale industries. The major causes contributing to the state of sickness are listed below:

Poor entrepreneurship

Page 17: Bangladesh Shilpa Bank

Lack of proper studies

Lack of management & technical knowledge

Low equity base and dishonesty of purpose

Poor market planning

Idle capacity/low capacity

Infrastructure (power, etc)

Shortage of funds (Working capital & BMRE)

The study suggested a number of measures to alleviate the cause of industrial sickness. The immediate measures included–Easing debt burden, Reappraisal of sick units, Debt-equity swap, Rescheduling, Funds for BMRE & Working Capital, Manpower training, uninterrupted power supply, etc. On the other hand, the suggested long run measures were – conducting sector reviews, developing project preparation capability, creating an Institute of Technology, creating management capability, etc. However this study suffers from methodological problem.

FUNCTIONING OF SICK INDUSTRIES FUNCTIONING OF SICK INDUSTRIES REHABILITATION AND REVIVALREHABILITATION AND REVIVAL CELL UNDER IP-91CELL UNDER IP-91

A ‘Sick Industries rehabilitation and Revival Cell’ was formed in the middle of 1991 at the Ministry of Industries (MOI). The cell headed by the Secretary, MOI, and GOB with representatives of all prominent chambers and financial institutions had the following terms of reference –

To define a sick industry

To identify sick industries and the reasons thereof on the basis of a survey

To submit report with specific recommendations for arriving at the appropriate solutions in each case

1. Definition of sick industry according to Sick Industries rehabilitation and Revival Cell

The cell defined a sick industry as follows –

An industrial unit (a) which could not reach the stage of normal production with normal profit or (b) has incurred loss or remained at the unprofitable level for consecutive 3 to 6 years from the first year of commercial production or (c) could not produce above the break-even point for reasons beyond the control of the entrepreneurs.

2. Causes of sick industry according to Sick Industries rehabilitation and Revival Cell

Page 18: Bangladesh Shilpa Bank

The Cell identified the following major causes of various types of industries fallen sick:

Selection and Implementation of Projects without the required feasibility studies

Supply of imbalanced and defective machinery

Inadequate/Non-availability of working capital (in majority of the cases)

Non-provision of financial assistance for BMRE, where necessary

Lack of timely decision and support by the financial institutions and the related agencies (in majority of the cases)

Loss incurred by natural calamities.

Unauthorized inflow of smuggled and officially duty-free foreign goods

Frequent power disruption, irregular supply & high price of power

Improper utilization of productive capacity

Disruption of production due to political unrest, labor unrest, etc

High rate of interest on bank loan

Marketing problem for locally produced goods

Upward movement of exchange rates

Fiscal anomalies between the imported raw material of locally produced goods and imported finished goods.

Lack of sound management

Lack of proper implementation of industrial policies

3. Recommendations of Sick Industries rehabilitation and Revival Cell for sick industry

A number of recommendations were suggested by the selection committees separately sub-sector-wise in order to rehabilitate and revive the identified sick industries, which were finally approved by the sick industry cell. The principal recommendations were here as under:

Waiver of 100% penal and 50% - 100% normal interest

Rescheduling of outstanding loan for repayment in easy installments

Provision of necessary working capital, financial and technical assistance to BMRE cases after conducting fresh feasibility studies

Page 19: Bangladesh Shilpa Bank

Withdrawal of all filed suits

Supply of electricity and other utilities on regular basis and discontinuance of peak hours of electricity

Unnecessary delays in providing financial assistance and support to be avoided

Stoppage of unauthorized inflow of foreign goods

Lowering of interest rate on industrial loan

Fiscal anomalies to be removed

Introduction of special insurance scheme on easy terms for natural calamities

Compilation of accurate statistics for investment decision

In order to provide protection to home industry, local goods that are produced abundantly should be discouraged for import.

The report further suggested that as there exists special need for co-ordination between the operations of the different ministries, agencies, banks and financial institutions and the policies and rules of the Govt. and various laws for rehabilitation of sick industries, a "Board for Industrial and Financial Restructuring" might be formed through enactment of special laws. Under the same law, there may be a high level appellate authority to review the appeals of the concerned quarters and provide judgments against the decisions of the said board.

RECOGNITION OF SICK INDUSTRIES IN THE FIFTH FIVE-YEAR PLAN (1997-RECOGNITION OF SICK INDUSTRIES IN THE FIFTH FIVE-YEAR PLAN (1997-2002)2002)

The Fifth Five Year Plan (1997-2002) was launched by the Government. Unlike the previous Five-Year Plans, the Fifth Five Year Plan recognized the presence of a large number of sick industries and listed the main reasons therefore as follows:

Depreciation of taka in relation to the foreign currency in which loan capital was obtained

Technological obsolescence

Withdrawal or lowering of protective tariff wall,

Management inefficiency

Inadequate working capital support by the banking system; and

Pilferages by the sponsors, in collusion with the personnel of the lending banks or financial institutions

Page 20: Bangladesh Shilpa Bank

In this paper it has been suggested that during the plan period concrete steps will be taken to remove the relevant causes of sickness through joint efforts of the owners, management, labor and the funding agencies.

SUPPORTIVE MEASURES PROPOSED IN THE NATIONAL BUDGET OF 1998-99SUPPORTIVE MEASURES PROPOSED IN THE NATIONAL BUDGET OF 1998-99 FOR CURBING INDUSTRIAL SICKNESS FOR CURBING INDUSTRIAL SICKNESS

While announcing the national budget for the financial year 1998-99, the Finance Minister referred to the sick industries in Bangladesh. Though he admitted the realities of sickness in the context of governing principles of capitalism, he attributed the main reasons of sickness to mismanagement, political and economic stability and rapid liberalization and unexpected shifts in economic policy. A package of supportive measures was proposed in the budget speech with a view to scaling down the problems of sick industries which are follows:

Since small entrepreneurs are adversely affected by the phenomenon of sickness and detailed investment analysis is hardly possible in case of small units, steps would be taken for providing assistance to the small sick industries already registered with MOI.

A special committee would be set up to consider remission of interest and penal interest up to 100% of those enlisted sick industries which had borrowed up to Tk. 50 lacs from any state-owned bank. The Government would reimburse 50% of such remitted interest amount to banks. The amount remaining due after remission would become payable by three years in monthly installments.

Sponsors of sick industries having borrowed more than Tk. 50 lacs, and being unable to pay the dues, may submit compromise proposal to the banks for decision on the basis of bank-client relationship. In cases, the sponsors believe that their sick industries can be profitably rehabilitated; they may submit feasibility reports to the concerned banks for taking appropriate steps on the basis of guidelines given by the special committee.

Where court cases are pending, all proceedings would be taken within the legal framework without compromising the interests of the banks.

Upon implementation of the above measures, all Govt. Committees relating to sick industries would stand abolished and hence, all sick industries would have to seek redress under the Bankruptcy Act.

The Government will issue bonds worth Tk. 60 crore in FY 1998-99 to compensate the banks for implementation of the above measures. If necessary, allocations for this purpose may be enhanced in the future.

FORMATION OF SPECIAL COMMITTEE ON INTEREST REMISSION FOR THE FORMATION OF SPECIAL COMMITTEE ON INTEREST REMISSION FOR THE IDENTIFIED SICK INDUSTRIESIDENTIFIED SICK INDUSTRIES

The Ministry of Finance considered some observations of SIA and constituted a ‘Special Committee on Interest Remission’ under the convener ship of a retired judge.

While resolving the cases under consideration for remission of interest, the following reasons were found to be dominant in contributing to sickness in industries:

Page 21: Bangladesh Shilpa Bank

Selection of project without proper feasibility studies and appraisal

Failure in selecting appropriate technology

Supply of defective machinery due to inexperience of both entrepreneurs and banks

Problem in marketing the produced goods

Location problem and lack of skilled manpower

Non-availability/Inadequacy of working capital from the financing banks

Delay in financing decision and loan disbursement

Natural disasters

Smuggling of foreign goods/liberal import policy

Frequent power disruption/Non-availability of gas and power connection.

Frequent changes in exchange rates and fiscal anomalies.

Lack of co-ordination amongst various ministries and Govt. departments

Over-crowding of industries in the same sub-sector

Deterioration of law and order, political instability, extortion, strike, etc

Management inefficiency, etc

However, in April 2001 the Finance Minister in his speech remarked that there was no scope for continuing state support for rescue of sick industries. He added that the Govt. tried its best to reduce the number of sick industries from over 1700 to less than 400 through supportive measures. But this should not be looked upon as a permanent phenomenon in a market oriented economy.

DAILY STAR REPORT ON APRIL 7, 2006DAILY STAR REPORT ON APRIL 7, 2006

Govt. urged to frame law for protecting sick industries

--Staff Correspondent

President of Bangladesh sick Industries Association Chowdhury Muhammad Ishaq urged the government to constitute a rehabilitation and reconstruction board and frame an appropriate law for protecting the sick industries of the country.

He said at a Press conference held at the National Press Club on Saturday, "The government had identified 2580 industries as the sick industries and of them 100 are in the public sector. About one lakh workers have become jobless and 49000 people have been affected directly due to serious disruption in these industries,"

Page 22: Bangladesh Shilpa Bank

He said- only 700 sick industries could be traced and others were abolished. The president of the association alleged that the government policy for rescheduling the loans was not the borrower friendly.

He urged for keeping the sick industries out of the purview of Artha Rin Adalat. Responding to a question he said the association had submitted its demands to the government and met with the Minister for Law and Parliamentary Affairs Barrister Moudud Ahmed. The minister according to them assured the association of reviewing the problem faced by the sick industries.

FINANCIAL EXPRESS REPORT ON FEBRUARY 2, 2006 FINANCIAL EXPRESS REPORT ON FEBRUARY 2, 2006

Entrepreneurs in distress: Rescue plan of sick industries shelved

-By Staff Reporter

Chowdhury Muhammad Ishaq, President of Bangladesh sick Industries Association said that entrepreneurs burdened with their sick industries have been passing their days in distress since 1991, due to non-implementation of the government decision to write off bank’s bad debts.

He thinks that the causes which led to loss of commercial viability of these sick units included selection and implementation of the projects without judging viability, supply of sub-standard machines for the units, non-cooperation of banks to provide working capital to the units, lack of fund for BMRE of the projects, affected by the natural calamities, power outages, drastic fall in productivity for various reasons, lack of protection for marketing of the local products, reduction of export market, continued losses, non-availability of connections of gas and electricity as per need, absence of proper industrial policy and lack of efficient management.

He also identified non-cooperation of the commercial banks to provide working capital in time as key factor for turning their industrial units sick.

The association leader also informed that the sick Industries Rehabilitation Cell formed as per government gazette notification on June 1991, identified sick units and recommended immediate measures to rehabilitate the sick units by waiving their bad debts. But instead of paying heed to the cause, Bangladesh Bank issued a circular asking the commercial banks and other financial institutions to go for legal battle and settle bank loans through filing of cases against the defaulters before the Artha Rin Adalat, they regretted.

Secretary General of the Association Rafiqul Hoque Akand informed that as per a survey, at least 700 private sick industries needs write off their debts on principle loan involving Taka 300 crore,, the association leaders said adding that the remaining 1,780 enterprises have no existence due to various factors including fund constraints.

Senior Vice- President of the association M Siddiqur Rahman also demands necessary steps immediately for promulgation of Bangladesh sick Industries Act and constitution of sick Industries Rehabilitation Reconstruction Board to address the problem in a proper manner.

Page 23: Bangladesh Shilpa Bank

He also demanded scrapping of cases filed against the sick industries entrepreneurs under the existing Bankruptcy law to end their harassment.

Industrialization is the prime concern of all the economies, especially in developing countries. Since the independence, numerous policies and efforts have been made to accelerate the pace of industrialization in Bangladesh. Bangladesh government has established specialized financial institution named Bangladesh Shilpa Bank on 31st October 1972 with view to providing long term and intermediate term loan to the entrepreneurs for accelerating the process of industrialization of the country by providing financial assistance and equity support.At the very beginning of Bangladesh Shilpa Bank, it was the only institution without whose support industrial project was impossible to build up. About the entire industrial unit established up to 1990 is the output of Shilpa Bank. It is the bank whose main objective is to encourage and motivate the potential entrepreneur to set up the new industry in the various part of the country. Although some commercial banks are providing short as well as long term industrial support to potential entrepreneurs, but still, Bangladesh Shilpa Bank is on the prior position. For the industrial development the contribution of BSB is incomparable. \Bangladesh Shilpa Bank undertakes various projects by providing finance, machinery and other aids, some projects are implemented successfully and some projects are failed to attain the goal and these firms are called sick firms according to the BSB language.

Sick industries mean the industries, which either become stuck-up during construction or could not operate successfully after implementation. These projects could either pay back the bank’s dues or make any contribution to the national economy. These projects were identified as sick due to their inability to generate sufficient fund for debt servicing. There are so many sick industries in Bangladesh, which has no specific statistical data. Here the main objective is to identify the causes of sickness of these industries.

SICK SITUATION OF A INDUSTRY SICK SITUATION OF A INDUSTRY

Normally BSB meets the long-term credit needs for implementation of the projects. BSB charter provides for extending working capital to its financed projects only to a limited scale. While sanctioning loans by BSB provision is made for commercial banks to provide 70% of the working capital needs. But in most cases it is found that the project management either can’t raise the required working capital from the commercial banks, or they can’t raise required amount in due time. As a result these projects could not go into operation on schedule time and they become unable to pay the interest and the principal amount. At last they are treated as sick industry. In Bangladesh, the growing incidence of industrial sickness and its adverse impact on the economy in the form of loss of productive capacities, investment potential, employment, etc. drew the attention of the policymakers in the Government first in the late eighties. In the nineties, with the advent of market economy and consequent trade liberalization, the intensity of industrial sickness took a new dimension. The successive governments came up with policy measures at different periods to address the problem of sick industries.

METHOD USED TO IDENTIFY A SICK INDUSTRY METHOD USED TO IDENTIFY A SICK INDUSTRYThere are some specific criteria to identify a sick industry. Two types of factors can be considered to identify the sick industries. They are-

Quantitative factors Qualitative factors

Page 24: Bangladesh Shilpa Bank

A.A. QUANTITATIVE FACTORS:QUANTITATIVE FACTORS:To identify a sick industry the following quantitative factors are considered-

a) On the basis of Cost- Benefit AnalysisFor identifying a sick industry the following criteria may be considered by cost- benefit analysis. If the cost of the project is more than the benefit then the industry is to be considered as a sick industry. Sometimes the industry can’t recover the cost of labor, material. For this reason the industry goes into loss.

b) On the basis of Break Even Analysis\

O

An industry should produce up to break-even point due to recover the fixed cost or overhead cost. If they can’t recover fixed cost then this industry can be considered as a sick industry.

c) On the basis of Financial Problems/Shortage of Working Capital

The shortage of working capital is the most acute problem for majority of the sick industries. Working capital is required to finance purchase of required raw materials and other short term needs of a project after it is implemented. A survey shows that 28% of the projects suffer due to shortage of capital. The problems, which lead an industry toward sick, are as follows-

Measurement of investment outlay and cost of the project are not appropriate When the means of financing is not availableWhen the project is not profitableWhen the production is not reached at the break-even point When they can’t calculate appropriate risk level of sickLoan application with insufficient amount of money that would not meet fixed and

operation costCash flow of the project is not availableIf actual cost of the project is more than the budgeted costShortage of working capital, i.e. if they do not manage the sufficient working capitalIf interest rate increases the cost of working capital then the project may become sickLack of adequate operating capital

FC

Cost

Production

VC

TR Profit

Break-Even Point

Page 25: Bangladesh Shilpa Bank

Higher fixed cost, i.e. increase the fixed cost as a result of increasing of the price of machinery, land or other fixed items

When variable cost increasesWhen there is no sufficient mortgage Improper inspection of bank financed projectInsufficient insurance facilityEconomic problem comes from the social cost benefit analysis.

B.B. QUALITATIVE FACTORS:QUALITATIVE FACTORS:To identify a sick industry the following qualitative factors can be considered-

1. The symptoms of Sick Industry

Sick industry is difficult to define. Nonetheless the symptoms of sick industry are as follows-The initiator is unable to pay sufficient money at the implementation stageThe delay of implementation increases the project cost. It also creates many problems

and the burden of loan interest is increased.Lack of full production or frequent obstruction of industryThe initiator is unable to pay the loan installment and other liabilitiesThe failure of payment of loan installment in time increases the burden of loan

amount Inability to submit the financial statement in timeIncrease the tendency of undertaking unfair means in preparing the papers of stock

materialsGoods of the stock increase of unsatisfactory saleProfit from investment decrease graduallyThe production level decreases gradually Taking loan from various sources at a high rate Applied for a large amount of loanNon-cooperating tendency with the loan providing bankersLacking of perfection in the market

2. Technological problems

A survey of Depository Financial Institution reveals that 12% of the projects suffer due to technological problems, which lead an industry toward sick, are as follows-

Machinery imbalance causing lower capacity utilization is the major technical problem of many projects. Some also suffer from faulty technical design.

Whether the preliminary test and studies are not appropriateAvailability of raw materials, powers and other infrastructural facilities are not

established.The selected scale of operation is not optimalThe production process chosen is not suitableThe equipment and machine chosen are not appropriateLack of modern technology like incapable to use the computer and modern machinery If the selection of machinery becomes faulty, it will not ensure the achievement of

objectivesWrongly or inappropriate selection of the machineryLower capacity of the machine resulting price will be higher, i.e. production cost

higher

Page 26: Bangladesh Shilpa Bank

Inconsistency between the origin of raw materials and the factory locationProduction of products and final consumption adversely affect the business Lack of infrastructure facilitySelection of old and backdated technologies to be used in production Delay of machinery procurement & rapidly change in technological environment

Unavailability of supply of gas, electricity and water etc

3. Administrative and Managerial problems

Success of a firm largely depends on management. There are some internal conflict between the workers and managers. According to the research paper of Bangladesh Institute of Development Studies reveals that 9% of the projects suffer due to administrative and managerial problems. The administrative problems, which lead an industry towards sick, are as follows-

When the management is not capable to manage all the managerial aspects; management should have proper planning, organizing, controlling, administrating and monitoring.

Weak management of the projectLack of efficiency of employment as well as managementsConflict and also death of management’s partnerDeath of main entrepreneur of the projectInsufficient employeesUnskilled human resourcesCorruption and intentional misuse of organizational assetsLack of proper planning, organizing, controlling, administrating and monitoring

4. Marketing Problems

A survey of Depository Financial Institution reveals that 31% of the projects suffer due to marketing inefficiencies, which lead an industry toward sickness, are as follows-

If the aggregate demand of products of proposed project is not possible to fill up.If due to national financial crises product demand decreaseIntroduction of new brand product Wrong forecasting about the marketWhen change the consumption trends in the past and present consumption levelIf change occurs in the Import and export policyWhen market share of the project is under low appraisalSmuggling of substitute goodsIf the raw material of the product is not purchased at appropriate timeImproper market justification If production cost is high resulting selling price high which ultimately decreases the

demandLack of market expansion and production diversificationShortage of raw material supplyHigh competition in the marketCheap price of the foreign product

5. Economic Problems]

Page 27: Bangladesh Shilpa Bank

The economic problems, which lead an industry toward sickness, are as follows- Economic problem comes from the special cost benefit analysisIt does not impact of the project on the distribution of the income in the society as

well as the level of saving and investment.

6. Political problems

The political problems, which lead an industry toward sick, are as follows-

Political pressure Political instability, which hampers the productionInsufficient facility provided by govt. to industrialist like tax rebate Political problem like worker unrest, hartalPolitical pressure to loan procurementInappropriate action taken by govt. to protect smugglingPolitical terrorism

7. Other Reasons of Sickness

Except the above problems there are also some problems, which lead an industry towards sickness. A survey Depository Financial Institution also reveals that 9% of the projects suffer due to other problems, which are as follows-

Selection of inappropriate industrial unit, which is not financial and logically viable in concerned country

Delay of loan applicationInternal delay of industries construction after loan sanctionIf a portion of loan amount used for personal useDelay of operation startOver estimation of mortgage valueDelay of loan procurement and sanctioning processDelay of documentation formalities in respect of loanCausing of rehabilitation measureInsufficient enforcement of law for recovery of loanInappropriate location of industriesNatural disaster that hampered productionTerrorism that hampered to establish an industryDelay of implementation

4.3 ARGENTI’S SCORE MODEL TO IDENTIFY A SICK PROJECT4.3 ARGENTI’S SCORE MODEL TO IDENTIFY A SICK PROJECTTo support the above definitions and to identify which industry is sick, a model has been included here. In 1977, Argenti developed the model called “A Score Model”. This model is discussed with a list of drawbacks, which hindered the success of an industry. All the drawbacks carry some points, which are used to identify a firm as sick or not.

The model is based on-1. Defects 2. Mistakes3. Symptoms

Weight Situation Occurs Qualifying Marks

Page 28: Bangladesh Shilpa Bank

Defects 108 Chief Executive Officer (C. E. O)

is an Autocrat4 Chief Executive Officer (C.E.O)

is also the Chairman2 Passive Board of Directors2 Imbalanced Board2 Weak Financed Director1 Poor Management Depth3 No Cash flow Plan3 No Budgets/Budgetary Controls15 Poor Response to change

Total 43Mistakes 10

15 High Leverage (debt/equity)15 Overtrading 15 Big Project Gone Wrong

Total 45Symptoms 05

4 Financial Signs Weak4 Creative Accounting4 Rumors/Staff Turnover/Low

Morals/Untidy Offices/Frozen Salaries

Total 12

Total possible score: 100 Qualified: 25 or less

According to the Model, defects part carries total 43 weights and qualifying marks in this part is 10 out of 43. If-

The C.E.O is an autocrat then the industry is weighted by 8 And the C.E.O is also the chairman then the industry is weighted by 4.

For –Passive Board of Directors the industry is weighted by 2Imbalanced Board of Directors the industry is weighted by 2Weak Financed Directors the industry is weighted by 2Poor Management Department the industry is weighted by 2No Cash flow Plan the industry is weighted by 3No Budgetary Control the industry is weighted by 3Poor Response to change the industry is weighted by 15.

If the industry gets 10 or less marks in this defect part then it will not be considered as sick. But if it gets more than 10 then it will be treated as sick.

In the mistakes part-

Page 29: Bangladesh Shilpa Bank

For-High leverage, the industry is weighted by 15Over trading the industry is weighted by 15And Big Gone Wrong the industry is weighted by 15If the industry gets 10 or less marks in this part then it will not be considered as sick. But if it gets more than 10 then it will be treated as sick.

In the symptoms part-Financial weakness carries 4 marksCreating Accounting carries 4 marksRumors/Staff turnover/Low morals also carries 4 marks.Here the total weight is 12 and qualifying marks is 5.

According to above model it is clear to identify the sick industry. The industry, which gets score less than 25, is not considered as sick industry. But the industry, which gets more than 25 score, is considered as sick industry.

4.4 IDENTIFIED SICK INDUSTRIES 4.4 IDENTIFIED SICK INDUSTRIES In Bangladesh there are so many sick industries. The sick industry concept is not the newest one. It is occurring from the pre-independence of Bangladesh and Bangladesh inherent some sick industries from its birth. After independence this is also continuing. The exact figure of sick industry is not identified. But on the basis of the above factors 274 sick industries that are financed by BSB are identified as sick during the year 2003- 2005. Some of them are stated below:

Some Sick Industries

G.M.K Textile Ltd. Ali & Sons Ltd. Malik Auto Rice MillMeraj Fabrics Ltd. Shardar Textile Mills Ltd. Al-Amin Lee Factory Jahan Group of printing & packaging

Nima Corporation Ltd. United company

Al-Amin Printing & packaging

J.K.K Industry Ltd Mitaly Enterprise Pvt. Ltd

Riad Products Pvt. Ltd Grand Dhaka Hotel Pvt. Ltd Helal Engineering Pvt. LtdTas Toys Pvt. Ltd Hotel Konic Pvt. Ltd Quick Carrier LtdMicro Aliment Manufacturing Co. Ltd.

Toronody Water Ways Pvt. Ltd

Tempkul Ltd

Hasan Agro Engineering Workshop Ltd

Companygonj Rubber Industry

Tito Textile Ltd

Pioneer Iron Foundry & Engineering

Padma Tyre Retarding Industry

Brick Linker Ltd

Diamond Industry Pvt. Ltd Shovo Auto Rice Industry Ltd

Nakko Ice Ltd

Jahanara Moulding & Engineering Workshop

South East Enterprise Oriental Foundry

Allama Nails Allied Industry Pvt. Ltd

Coxbazar Aqura Resources Khan & Khan

North Bengal Silicate Industry Pvt. Ltd

D & S Auto Rice Mill Uttaran Engineering complex

Mohadevpur Auto Rice Bancharampur Textile Rangpur Food Company

Page 30: Bangladesh Shilpa Bank

Hossain Electric Com. Agro Producer Ltd Mocca Mills LtdLaksham flour Mills Altaf Rice Mills Noor Rice MillsNoor Cold Storage Rangpur Poly Com. Mrs. National Cold Storage Shovo Rubber Industry

Source: Manual of Project Rehabilitation Department 2005

From the above statistics it is clear that there are so many projects in Bangladesh are sick.An analytical discussion makes it clear to us that the reasons of their sickness and which projects are sick for which causes.

If we further analyze it we find a clear picture of the sick projects and their relevant causes. These things are explained below under a table:

Causes

Sectors

Tech

nica

l

Man

agem

ent

Mar

ketin

g

Wor

king

Cap

.

Tech

. + M

gt.

Tech

. + M

ktin

gTe

ch. +

W/C

Mgt

. + M

ktin

g

Mgt

. + W

/CM

ktin

g +

W/C

Tech

. + M

gt.

Tech

. +

Mgt

+ +

W

/CM

gt.

+

Oth

ers

Tota

l num

ber

Food & allied 3 8 9 19 3 1 6 - 3 - 3 7 - 13 75

Textile 9 3 33 3 - - 7 5 - - - 1 - 3 64Metal products - 5 - 2 - - 2 1 1 1 - 1 - - 13Jute - 3 - 7 - 2 2 - 1 - 1 - 3 1 20Engineering 4 3 - - 3 - - - - - - - - 5 16Paper printing 1 1 - 4 1 - - 3 1 - 1 - - - 12Service - 1 3 - 1 - - - - 3 - - - 1 9Electrical 2 2 2 1 - 2 - 1 - - 2 1 - - 13Petrochemicals - 1 1 - 2 - - 2 1 1 - - - - 8Non-metallic 2 1 - 4 - 1 1 - - - - - - - 10Chemicals 1 - 2 1 - - - - 1 - - 1 - - 6Pharmaceuticals 3 - - 2 1 - - 1 - 1 1 - - 5 14Tannery - 3 1 3 - 1 - - - - - - 1 - 9Transport - - - - - - - - - - - - 1 4 5Total No. of problems

25 31 51 46 11 7 18 13 8 7 8 11 5 33 234

Source: Manual of Project Rehabilitation Department 2005

MAJOR CAUSES THAT AFFECT THE SICK INDUSTRIES IN BANGLADESH MAJOR CAUSES THAT AFFECT THE SICK INDUSTRIES IN BANGLADESH

A survey of Depository Financial Institution reveals that-22% of the projects suffer due to administrative and managerial problem.12% of the projects suffer due to technological problems.12% of the projects suffer due to shortage of capital.

31% of the projects suffer due to marketing inefficiencies. 9% of the projects suffer due to other problems.

Page 31: Bangladesh Shilpa Bank

So, we see that only one reason does not affect the sick industries. All the above-mentioned reasons are responsible for sickness of industries in Bangladesh.

IMPACT OF SICK INDUSTRY IN BANGLADESH OR BSB IMPACT OF SICK INDUSTRY IN BANGLADESH OR BSBSick industries have negative consequences on BSB-

Increase of non-performing assets in organizational level as well as national levelDecrease contribution in GDP and GNPDecrease in productivity at national levelAverage effect in banks profitabilityIncreases the classified loanIncrease the lending rate of interest, which adversely affect the new and regular

borrowersAffects adversely in the economic growth rate of the countryCreate adverse psychological impact on the prospective entrepreneurs.

PRECAUTIONS ABOUT SICK INDUSTRY PRECAUTIONS ABOUT SICK INDUSTRY

Sick situation arises in an industry in some abnormal period. But if the rate of sickness is overwhelming then it becomes a matter of fact. So before providing loan importance must be given on correct evaluation procedure. So at pre-investment stage the following things must be considered-

Examine the project appropriatelyThe project cost is calculated in a proper wayThe proper location is selectedDefect machinery must not be purchasedEnsure sufficient skilled and experienced personnel Proper steps are taken to protect uneven breakdown of electricityEnsure that proper people are involved in the managing committeeEnsure the financial capability of the initiatorEnsure the procedure of makeup the preliminary cost and the doubtful lossEnsure the quality of the produced productEnsure the proper way to marketing the produced productConsider the change of taste of customerProper plan is taken to implement the projectSteps are taken to avoid the potential conflict.

REHABILITATION POLICY OF BANGLADESH SHILPA BANK REHABILITATION POLICY OF BANGLADESH SHILPA BANKAll sick industry is not rehabilitated because the all-sick industry has not al l possibilities to rehabilitate. It’s mainly depends on the nature of the sickness. The sick industry that is probable to rehabilitate by providing and assisting some predefined criterion. The predefined criterions are based particularly on:

1. Management perspective 2. Technical perspective and 3. Financial perspective4. Marketing perspective

In the case of rehabilitating sick industries the bank takes different policies in different situations, which are given as follows:

(a) MANAGEMENT PERSPECTIVE(a) MANAGEMENT PERSPECTIVE

Page 32: Bangladesh Shilpa Bank

Management of the project should measure the aggregate demand of the product or the project and also maintain the market share. Consumption trends and production are to measure for rehabilitating a sick industry. If the bank thought that a little change in the managing committee would reestablish the project then they make a change in the managing committee.

b) TECHNOLOGICAL PERSPECTIVEb) TECHNOLOGICAL PERSPECTIVEWhether the raw material and technology is available or not that must be measured in the form of price quality. If they thought that some technological change would reestablish the project they make some technological change.(c) FINANCIAL PERSPECTIVE(c) FINANCIAL PERSPECTIVEIn the financial measurement the project should compute the cost of capital and maintain budgeting. The present value of net cash inflow should be higher than the present value of cash outflow. In such case, the bank provides some financial treatment that the amount of interest is to be waived or re-phased or providing consulting service, i.e.

1. Success about the proper way2. Inspiration by providing motivation

After considering an industry as sick, then the industry is taken into rehabilitation by aiding above additional support of those sick industry that can recovers the additional investment then it seems to be as rehabilitated industry otherwise not. In some extraordinary case they bound to take some terrible decision because of some political pressure.

(d) MARKETING PERSPECTIVE(d) MARKETING PERSPECTIVE The employees of project rehabilitation department are employed in this case. Value delivery sequence of Project Rehabilitation Department is shown below-

Choose the value

1. Segmentation the reasons of sickness Uncontrollable Controllable

The causes behind sick industries are discussed below-Shortage of working capitalLack of marketing knowledgeTechnological obsolescesAdministrative and managerial inefficiencies Present economic situation of home and abroad Political conditionOther reasons behind sickness

2. Targeting to rehabilitateManagement perspective

Choose the value

1. Segmentation

2. Targeting

3. Positioning

Provide the value

1. Product/Service develops

2. Pricing3. Distributing

Communicate the

value

1. Sales force

2. Promotion

Page 33: Bangladesh Shilpa Bank

Technical perspective and Financial perspective

3. Positioning in the market

BSB rehabilitates the sick industries of their financed projects.

Provide the valueTheir products are-

Supporting the managementProviding the working capitalTechnological enrichment

Their programs are-

Debt reliefInjection of additional fundsDirect management

Communicate the valueThe personnel of Project Rehabilitation Department are employed for this purpose.

PROGRAMS TAKEN TO REHABILITATE THE SICK INDUSTRIESPROGRAMS TAKEN TO REHABILITATE THE SICK INDUSTRIES

BSB has taken the following programs during the year 2003-2005-Deferred payment of IDCP (Interest during construction period) after some

moratorium period in installmentsRegular loan repaying projects are honored with special certificates and BSB Crests.

They are encouraged to take more loans/working capital.Problem projects are given waiver of interest, rephasement/rescheduling, block

account facilities for easy repayment of bank’s loan.Injection of additional fundsBalancing & modernizing of machineryProduct diversificationStrengthening or changing the project managementRestructuring of loan accounts with transferring part of loans/interest in interest free block account

FACILITIES PROVIDED UNDER REHABILITATION PROGRAM FACILITIES PROVIDED UNDER REHABILITATION PROGRAM BSB had given loan to sick industries at the first time TK. 513 lac during the year 2005.Second time BSB gave them under rehabilitation program.

Loan sanctioned TK. in lacBSB had given loan at the first time 513.00Under rehabilitation program:Long term loan 163.00Working capital 25.56

The bank also makes a program of taking over management of the sick projects directly where the above measures were not considered sufficient due to inefficient

Page 34: Bangladesh Shilpa Bank

management/mismanagement. So they created a department called “Sick Project Management Department” for ensuring efficient management of such sick projects. The responsibility of this department is to make such projects capable of debts servicing through profitable operation. So the bank continued sanctioning of term loans during FY 2004-2005. This year local currency loan of TK. 989 million, which was sanctioned to 27 projects. Of the total sanctioned amount TK 687 million was for 21 new projects and an additional loan of TK. 302 million was for on-going projects including 3 for BMRE purposes.

Sanction of term loan

Million TK.2003-2004 2004-2005

Number of projects

Number of projects

Local currency

Foreign currency

Total Number of projects

Local currency

Foreign currency

Total

New projects

21 687 - 687 34 826 - 826

Existing projects (BMRE)

3 166 - 166 1 47 - 47

Additional loans

3 136 - 136 3 136 - 136

Total 27 989 - 989 38 1009 - 1009

Under rehabilitation program BSB has taken so many measures to rehabilitate the sick industries during the year 2003-2005. Summarized measures that are taken by BSB to rehabilitate the sick industries are given below-

Loan outstanding Measures taken (Million TK.)(Million TK.)

Ove

rdue

Tota

l ou

tsta

ndin

g

Proj

ects

Rep

hase

men

t

Wai

ver

of

in

tere

st

Blo

ck A

/C

Add

ition

al

Loan

s

Wor

king

C

apita

l

Equi

ty

parti

cipa

tion

525 950 12 37 (10) 35 (10) 28 (7) 21 (9) 2 (1) 1 (2)411 785 21 13 (6) 13 (6) 54 (6) 161

(16)30 (5) 4(2)

46 350 5 73 (3) 73 (3) 18 (3) 6 (4) 52 (5) 18 (2)444 524 3 - - - 1 (1) 6 (2) -23 40 2 - - - 14 (2) - -51 94 2 1 (1) - - 7 (1) 2 (1) -66 85 2 - - 4 (1) 5 (2) - -44 53 - - - - - - -33 45 - - - - - - -22 28 2 - - - 33 (2) - -165 211 1 -- - - 1 (1) 1 (1) -

Page 35: Bangladesh Shilpa Bank

70 101 1 - - - 6 (1) - -3 30 1 3 (1) - - 8 (1) - -3 3 - - - - - - -1906 3299 53 118

(21)121 (19)

104 (17)

263 (39)

93 (15) 23 (6)

Source: Manual of Project rehabilitation department of BSB 2005 Note: Parentheses indicate number of projects ARE ALL-SICK INDUSTRIES REHABILITATED?ARE ALL-SICK INDUSTRIES REHABILITATED?

All sick industries are not rehabilitating because the all-sick firms have not all possibilities to rehabilitate. Its mainly depends on the nature of sickness. The sick industry, which is probable to rehabilitate by providing, and assisting the following supports are rehabilitated.

THE INDUSTRIES WHICH ARE REHABILITATED AND THE INDUSTRIES THE INDUSTRIES WHICH ARE REHABILITATED AND THE INDUSTRIES WHICH ARE NOT REHABILITATEDWHICH ARE NOT REHABILITATED

A. Sick industries, which are rehabilitableChanging of management structureProviding financial aids or loan without interest or lower rate of interestFinancial treatment that the amount of interest is to be releasedAssisting for replacement of machineRehabilitation is sometimes depending on merit of the project.Providing consulting service

a) Success about the proper wayb) Inspiration by providing motivation

B. Sick industries, which are not rehabilitable After considering a firm as sick, then the firms are taken into rehabilitation by aiding above additional support of those the sick firm that can recover the additional investment then it seems to be as rehabilitated firm otherwise not.

ROLE OF MANAGEMENT OF REHABILITATION DEPARTMENT OF BSBROLE OF MANAGEMENT OF REHABILITATION DEPARTMENT OF BSBBangladesh Shilpa Bank was established to stimulate industrialization in the country. So, it financed in various types of industries. The industries on which it financed, all are not a successful one. Some of them have failed to gain success and identified as a sick industry. Rehabilitation Department is mainly deals with this sick industry. They find out the causes of sickness of a particular project. Sometimes they reschedule loan according to the capabilities of the project. Moreover more information and advises may be given so that the entrepreneur may run the business more effectively, sufficient return may gain and contribute to the economy. If the project is to rehabilitate, send to the law department and finally sued against the project. The main activities of rehabilitation department are as follows-

The department primarily selects a sick project. PID investigates the project and find out the causes of sickness and formed a committee to investigate the project. Then it is taken to be considered for rehabilitation. After considering it as a rehabiliatable industry, it is taken it the implementation after the approval of rehabilitation consultant committee.

Take necessary action to rehabilitate sick project after appropriate investigation.Take steps about rehabilitation document examination, recommendation preparation,

implementation and activation of plan.

Page 36: Bangladesh Shilpa Bank

Confirmation about project profitabilityTake necessary steps about production, marketing of product and loan repayment.Duties give up to the third party or previous management after successful managing

of the project.Managing and directing recommendation preparation about take over project.Analyze and compare the production, marketing and recovery of the rehabilitated

project and take appropriate action according.When there is scope to rehabilitate a project, document transfer to law department to

take further steps.

LIST OF A FEW SUCCESSFUL REHABILITATED INDUSTRIES LIST OF A FEW SUCCESSFUL REHABILITATED INDUSTRIES

After taking some initiatives and providing assistance in terms of management, technical, marketing and financial the following sick projects financed by BSB have become successful during the year 2003-2005.

Chemicals and Pharmaceuticals Location01. S.S.R Chemical Industries Ltd. Dhaka02. Islam Polymers & Plasticizer Ltd. Tangail03. Raja Plastic Industries Ltd. Gazipur04. KDH Laboratories Ltd. Dhaka05. Asiatic Business Ltd. Sylhet06. Pharmadesh Laboratory Ltd. DhakaCotton, Woolen & Synthetic Textiles01. Azim Mannan Garments Ltd. Chittagong02. Desh Gannents Ltd. Chittagong03. Jems Sweaters (Pvt) Ltd. Dhaka04. Auto Spinning Mills Ltd. Gazipur05. Techno Textile Mills Ltd. GazipurFood & Allied Products01. Meenhar Sea Foods Ltd. Chittagong02. Mimi Chocolate (Bd) Ltd. Dhaka03. Modern Industries (Bd) Ltd. Munshigonj04. Mustafa Cold Storage Ltd. Rangpur05. Bangladesh Beverage Industries Ltd. Dhaka06. Bengal Fish & Frogleg (Export) Ltd. ChittagongPaper, Paper product & Printing01. Eagle Box & Carton Mfg. Ltd. Dhaka02. Holiday Printing Ltd. Dhaka03. Toka Ink Ltd. Dhaka04. Bangladesh Paper Product Ltd. Chittagong05. Orient color Printers Ltd. Chittagong06. Transfer Paper Ltd. BograTannery & its products01. Apex Footwar Ltd. Dhaka02. Lexco Ltd. Dhaka03. Leather Board Ltd. Dhaka04. Comfort Footwar Ltd. Dhaka05. Bangladesh Chemical Ltd. Narayangonj

Page 37: Bangladesh Shilpa Bank

Non-metallic Mineral Products01. Savar Refractories Ltd. Dhaka02. Tajma Ceramic Industries Ltd. Bogra03. Standard Ceramic Industries Ltd. GazipurMetal products01. Rangpur Foundry Ltd. Rangpur02. Scala Industries Ltd. Gazipur03. Oriental Foundry & Agro Engineering Ltd. Dhaka04. Bogra Metal Industries (Pvt.) Ltd. BograElectrical Machinery & Goods01. Bangladesh Lamps Ltd. Dhaka02. National Fans Ltd. Gazipur03. Eastern Tubes Ltd. Dhaka04. National Accessories Ltd. ChittagongService Industries & Miscellaneous01. Hotel Simon Ltd. Cox’s Bazar02. Hotel Elysium Ltd. Dhaka03. G.Q. Ball Pet Ltd. Magura04. Rajanigandha Tankers Ltd. Dhaka

Source: Manual of Project Rehabilitation Department of BSB 2005

It is observed that a large number of projects are sick and they are loan defaulter. In this situation some suggestions has been given that will help BSB to overcome some of their problems.

CONCLUSIONCONCLUSION

Bangladesh Shilpa Bank is a well-known specialized bank of our country. We cannot think industrialization in our country without the contribution of Bangladesh Shilpa Bank. Although there are some drawbacks of BSB activities nevertheless it plays an important role in the industrial sector of Bangladesh. We get clear idea about this contribution through the analysis of the BSB activities from 1972 to till now. Although some unexpected political pressure hamper such activity but BSB always tries to overcome these sort of problem by his own policy and procedure. We observed that BSB able to contribute to GDP through their industrialization. It is clear that industrialization is the base of the economy of the economy. We observed that the loss of BSB is 100 crore less than that of previous year. It present that the position of BSB is more strength than previous year. Another notable thing is that BSB reduces their loan sanctioning area. As a result their loan sanctioning reduced to TK. 429 million. I think, it is not good news for our economy. Because new industry essential for employment generation. At present BSB carefully takes steps for sanctioning loan because of a huge fund become irrecoverable due to sickness of various projects. It is indeed that sickness is the consequences of unconscious and lack of investigation in case of issue of loan. We know sick project is the burden of bank as well as overall economy of Bangladesh. So, now-a-days BSB is reducing rehabilitation of sick industries. Because those industries, which are unable to pay their previous loan amount, if they are rehabilitate by the BSB most of them will not be able to pay the rehabilitated money also. So there was huge amount of loss occurred and for this reason project rehabilitation of sick industry and the work of this department is decreasing day by day. So I think BSB will close their rehabilitation to reduce their loss. I think proper scrutinizing of project proposal and careful physical verification may

Page 38: Bangladesh Shilpa Bank

make sure to be profitable of that industry as well as Bangladesh Shilpa Bank. Bangladesh Shilpa Bank should concentrate on loan recovery that is necessary for long-term profitability and sustainability. Without pros and cons everybody should to confess of BSB contribution. We expect continue their operations without influence and contribute more and more to our industry that brings good luck to the nation.

Bibliography

1. Bangladesh Shilpa Bank "Annual Report 2004-2005"2. Different Project Appraisal reports of BSB.3. Loan sanctioning letter of BSB.4. Bangladesh Shilpa Bank Ordinance 1972.5. Manual of different departments of BSB.6. BSB web side " www.shilpabank.gov.bd"7. Manual of Project Rehabilitation Department.