ball valve cateloge

7/18/2019 Ball Valve Cateloge

http://slidepdf.com/reader/full/ball-valve-cateloge 1/56

NIPPON DAIYA VALVE CO., LTD.



Manual Ball Valves

Features

Standard Specification

Standard Configuration

Production Range Boundary Dimension

F100NB (Full Port)

Pressure-Temperature Range



Boundary Dimension

E100JNC (Full Port)


Port Shapes and Number of Seat Mounted

Changeover Form

3-Way 2-Seats Ball Valve (E300NB-L2) Standard Configuration

Production Range

Boundary Dimension

3-Way 4-Seats Ball Valve (E300NB-L4/T4)


Production Range

Boundary Dimension

3-Way 3-Seats Ball Valve (E300N-L3/T3)


Boundary Dimension


Application Features Configuration Features


Pressure-Temperature Range

Boundary Dimension

Allowable Seat Leakage Amount

Flow Coefficient Cv Value and Flow Calculation

Fire-Safe Ball Valve

Jacketed Ball Valve

3-Way Ball Valve

Tough Seal Type V Port Valve

(V100ND)

Pneumatic Auto Valves

Actuator Selection Table

Boundary Dimension

FPN1100NB (Double Acting, Full Port)

FPO1100NB (Single Acting, Full Port)

Boundary Dimension

EPN1100JNC (Double Acting, Jacketed)

EPO1100JNC (Single Acting, Jacketed)

Usage Condition Vs. Valve Grade

Air Consumtion

Torque Actuator

2-Way Pneumatic Valve

Ball Valve (Jacketed)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Introduction

INDEX




Electric Ball Valves

Special Valves

Legend of Product Codes


Boundary Dimension

EPN1300NB-L2 (Double Acting)

EPO1300NB-L2 (Single Acting)

EPN1300NB-L4/T4-15A/100A (Double Acting)

EPN1300N-L3/T3-125A/200A

EPO1300NB-L4/T4-15A/100A (Single Acting)

EPO1300N-L3/T3-125A/200A


Boundary Dimension

VPN1100ND (Double Acting)

VPO1100ND (Single Acting)

FSR4100NB

FMSJ4100NB

FSH4100NB, FSD4100NB

EKSH4100N FPMK4100NB

ESR4300NB, ESR4300N

EMSJ4300NB, EMSJ4300N

ESH4300NB, ESH4300N

EPMK4300NB, EPMK4300N

VSR4100ND

VMSJ4100ND

3-Way Ball Valve


Accesories

Actuator Models and Features

Actuator Specif icat ion

Internal Circuit

2-Way Ball Valve

3-Way Ball Valve


3-Way Type Y Ball Valve

Top Entry Ball Valve

Ball Valve for Shield Use

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •



– 4 –

■ 2-Way Ball Valve

F100NB

Lever Operated

FPN1100NB

Pneumatic

FMSJ4100NB

■ Jacketed Ball Valve ■ 3-Way Ball Valve

E100JNC

Lever Operated

EMSJ4300NB

Electric


E300NB

Lever Operated

EPN1300NB

Pneumatic

DSH4300N

Electric

Introduction

Electric



– 5 –

■ Tough Seal Type V Port Valve

V100ND

Lever Operated

VPN1100ND

Pneumatic

VSH4100ND

Electric

■ 3-Way Type Y

YWN1300

Pneumatic

■ Ball Valve for Shield Use

EKTON1100N

Hydraulic

■ Top Entry Ball Valve

T100S TPO1100S

Lever Operated Pneumatic



– 6 –

Manual Ball Valves

■ Fire-Safe Ball Valve (F100NB)

● Features

After Gasket BurnoutBefore Gasket Burnout After Seat BurnoutBefore Seat Burnout

Figure 2Figure 1

Figure 4

After Packing BurnoutBefore Packing Burnout

Figure 3

● Standard Specification

● Nominal Size: Full Port Floating Ball (F100NB), DN15 to 200

● Face-to-Face Dimension: ISO5752 Compliant

● Connection: Flange

J10K, J20K, Class (ANSI, JPI) 150, 300● Parts Materials: Body — Carbon Cast Steel: SCPH2 (WCB)

Spheroidal Graphite Cast Iron: FCD400

Stainless Cast Steel: SCS13A (CF8) , SCS14A (CF8M), SCS16A (CF3M)

Ball — SUS304 (SCS13A), SUS316 (SCS14A), SUS316L (SCS16A)

Seat — New-PTFE and others (A page 8 is referred to)

● Pressure-Temperature Range: Please see the seat rating table.

● Operation Style: Lever Operated, Gear Operated

Pneumatic (Double/Reverse/Direct Acting)

Electric

● Coating (Body): Only Anti-Corrosive Coating (Except for Stainless Steel)

(1) Secondary Seat

If the PTFE seat is destroyed by fire or the like, the ball

adheres directly to the metal seat provided on the seat,

preventing excessive leakage from the valve seat. The flow

is not directional and there are metal seats on all sides.

(2) Metal-to-Metal Body Seal

The seals for the body and flange joints have a double-layer

sealing mechanism made up of a gasket and a metal-to-

metal contact. This prevents excessive leakage to the

outside of the valve from the body joints in the event that the

gasket is destroyed by fire.

(3) Stem Guard Mechanism

The flange provided on the stem prevents the stem from

popping out due to fluid pressure. Also, in the event that the

gland packing is destroyed by fire, the stem flange adheres

to the body, preventing excessive fluid leakage to the

outside of the valve.

(4) Antistatic Mechanism (optional)

An optional antistatic mechanism can be provided to

prevent the accumulation of static electricity (produced by

friction between the ball and seat) inside the valve.

The antistatic mechanism consists of a wire spring inserted

into the groove inside the packing retainer ring.



PartsMaterials

Stainless Cast Steel Cast SteelDuctile Cast Iron

FCD400FCD400

NTF, NCF, and others

SUS304 SUS304 SUS316

New-PTFE

New-PTFE

New-PTFE

New-PTFE

SCS13A

SUS304

New-PTFE

SUS304

SUS304SCPH2 (15A/100A), SCPH2 + STK490 (125A/200A)

SUS304

SUS316L SUS304

SNB7

S45C

SUS304

SUS303

SUS304

SUS303

SUS304

SUS304 (125A/200A, for fixing handle)

SUS304

SUS303

SNB7

S45C

SCS13ASCS13A

SCS14ASCS14A

SCS16ASCS16A

SCPH2SCPH2

SUS304

SCS13A

SUS304

SCS13A

SUS316

SCS14A

SUS316L

SCS16A

SUS304

SCS13A

MaterialsClass

J20K CL300J10K CL150

FCD400

SCS13A

SCS14A

SCS16A

SCPH2

✽: Only Nominal Size 125A/200A

BodyCap

Ball

Seat

Stem

Gasket

Packing

Bearing

Thrust Washer

Gland Flange

Gland

Bearing

Wire Spring

Travel StopHandle

Retaining Ring

Stud Bolt

Nut

Cap Screw

Set Screw

– 7 –

13 108 140 45 80130 130

1.9 2.3

19 117 152 50 85 2.5 3.0

25 127 165 51 100 160 160 4.0 4.7

38 165 190 70.5 115

230 230

6.5 7.3

51 178 216 80.5 120 8.5 10.1 64 190 241 87 135

350 350 13.5 17.0

76 203 283 97 145 16.5 23.0

102 229 305 116 180 450 450 280 285 165 190 62.5 77 240 300 27 38.5 41 57.5

127 356 381 148 260650 800

342 342190 230 77 90.5 300

46 59 73 92

152 394 403 173 280 362 362 460 61 75 88 108

203 457 502 207 350 800 1100 425 446 230 260 90.5 121 460 98 123 135 174

■ Fire-Safe Ball Valve (F100NB)

● Standard Configuration

unit: mm

Lever Operated Gear Operated approx. Mass (kg)

DN Lever Operated Gear Operated

Stainless Cast Steel,

Cast Steel, Ductile Cast Iron

63

70

71

76.5

86103

124

135

158

178

235

● Boundary Dimension

● F100NB (Full Port)

● Production Range (Nominal Size: 15A/200A)



– 8 –

Manual Ball Valves

● Pressure-Temperature Range

● Valves: F100NB, E100JNC, E300NB-L2, EK100N (Trunnion)

Code Seat Materials applied to Type New-PTFE

Reinforced PTFE (with Carbon Fiber) for Floating Ball

CF + Outside & Inside Metal Ring

CF + Additional Retainer + O-Ring (NBR)

for Trunnion BallCF + Additional Retainer + O-Ring (FKM)

DN15 to 25

Temperature (˚C)

DN40 to 65

Temperature (˚C)

DN80 to 100

Temperature (˚C)

DN125 to 200

Temperature (˚C)

DN250 to 350 (Trunnion)

Temperature (˚C) Temperature (˚C)

DN250 to 350 (Trunnion)

P r e s s ur e ( MP a )




P r e s s ur e ( MP a

)

P r e s s ur e ( MP a

)



Body

Jacket Cover

Insert

Insert

Insert Ring

Ball

Seat

Stem

Gasket

Packing

Thrust Washer

washer

Gland Flange

Gland

Bearing

Spacer

Travel Stop

Handle

Retaining Ring

Cap Screw

Plug

– 9 –

■ Jacketed Ball Valve (E100JNC)


● Nominal Size: Full Port, DN15 to 200

● Connection: Flange

JIS10KRF, 20KRF ANSI CL150RF, CL300RF

The flange size is slightly larger than the valve Nominal Size.

(Please see the boundary dimension table.)

● Body Material: Stainless Steel (SCS14A, SCS16A)

● Parts Materials: Please see the standard configuration table.

● Jacket:

● Please contact us for customer specific valves.

Parts

Inlet

Outlet (Bottom Plug)

E112JNC E113JNC

SCS14A SCS16A

SUS304TP or SUS304SCS14A SCS16A

SCS14A SCS16A

SCS14A SCS16A

SCS14A or SUS316 SCS16A or SUS316L

NTF, NCF, CFM, and others

SUS316 SUS316L

PTFE

Reinforced PTFE

New-PTFE

SUS316 SUS316L

SCS13A

SUS304

New-PTFE

SUS304

SUS304

SCPH2 (DN15 to 100)

SCPH2 + STK490 (DN125 to 200)

SUS304

SUS304

SUS304

1 MPa

250ºC

● Standard Configuration (Jacketed)

2-Rp (pipe thread)

1-Rp (pipe thread)

DN

13

19

25

38

51

6476

102

127

152

203

108

117

127

165

178

190203

229

267

292

330

54

58.5

63.5

82.5

93

100108

119

152

165

60

65

70

75

80

85

90

78

86

99

105

118131

148

176

202

243

1/2

3/4

130

134

142

160

169

188199

210

302

322

390

130

130

160

230

230

350350

450

650

650

800

314

387

407

471

240

300

460

62.5

77

90.5

40

50

65

80

100125

150

200

250

350

5.2

5.5

6.8

11.2

13.3

2027

43

67

98

162

57

94

125

199

R

Lever Operated Gear Operated

ConnectionFlange

NominalSize

LeverOperated

GearOperated

approx. Mass (kg)

unit: mm


Allowable Pressure

Allowable Temperature



L2 L3 L4

Port Shape

L port

T port

Port Number of Seat Mounted

2 3 4

– 10 –

Manual Ball Valves

■ 3-Way Ball Valve (E300N, E300NB)

● Standard Specification● Pressure Class:

● Port: Full Port● Flange: JIS10KRF, Class150RF / JIS20KRF, Class300RF

● Applicable Nominal Size: DN15 to 200

● Applicable Seat Materials: New-PTFE (and Others)

● Coatings (Body): Only Anti-Corrosive Coating (Except for Stainless Steel)

● Port Shapes and Number of Seat Mounted You can choose the 3-Way Ball Valve Type, combining the port shapes and seat mounting

directions by use, as following diagram.

Changeover Form

Top View (View from Actuator)

● Changeover Form

● Right diagram shows standard changeover of L shaped port.

Because L2 model has no seat on the middle port,

the pocket can be clogged up by a fluid with solids.

In such case, please use L4 or L3 model.

Please choose position or position as shut down position fora double acting port with solenoid valve.

Even if non-solenoid valve is installed, please choose position or

position as air leakage position for a single acting port.

● Regarding to T port, you can specify its form from the following positions (rotated 90 degrees each.)

Please choose shut down position for a double acting port with a solenoid valve, and air leakage positions for a

single acting port.

Applying high pressure on the plane indicated by arrows may cause downflow leakage.

Posision Posision Posision Posision

J10K, Class150 — 1.0 MPa

J20K, Class300 — 2.0 MPa

T3 T4



J10K

J10K, CL150


– 11 –

Parts

Body

Cap

Ball

Seat

Stem

Gasket

Packing

Bearing

Thrust Washer

Gland Flange

Gland

Bearing

Travel Stop

Handle

Retaining Ring

Stud Bolt

Nut

Cap Screw

Set Screw

DN

approx. Mass (kg)

Stainless Cast Steel

LeverOperated

GearOperated

13 146 73 80130

2.9

19 150 75 85 3.6

25 170 85 100 160 5.6

38 200 100 115

230

8.8

51 230 115 120 11.7 64 260 130 135

350 19

76 280 140 145 23

102 340 170 180 450 285 240 62.5 36 50127 370 185 260

650345

300 7760 87

152 430 215 280 365 79 106203 520 260 350 800 430 460 90.5 140 177

E300NB-L2-65/200 EG300NB-L2-125/200

Materials

Ductile Cast Iron Stainless Cast Steel

FCD400 SCS13A SCS14A


SUS304 or SCS13A SUS316 or SCS14A

New-PTFE

SUS304 SUS316

New-PTFE

New-PTFE

New-PTFE

New-PTFE

SCS13A

SUS304

New-PTFE

SUS304

SCPH2 (DN15 to 100)

SUS304

SNB7 SUS304

S45C SUS303

SUS304

unit: mmE300NB-L2-15/50

This configuration may changeaccording to the Nominal Size.

■ 3-Way Ball Valve (E300NB)

● 3-Way 2-Seats Ball valve (E300NB-L2) A valve with L shaped port. This valve is used for switching fluid only.



SUS304 (DN125 to 200, for fixing handle)

SCPH2 + STK490 (DN125 to 200)



J10K

J10K, CL150

Materials

FCD400, SCS13A

SCS14A

– 12 –

Manual Ball Valves

3.719 140 70 95 160

4.2

25 160 80 105230

6.6

38 180 90 119 9.0

51 200 100 129350

13.7

64 240 120 140 19.5

76 260 130 167450

28.0

102 330 165 182 35.0

Body

Side Cover

Ball

Seat

Stem

Gasket

Packing

Bearing

Thrust Washer

Washer

Gland Flange

Gland

Bearing

Travel Stop

Handle

Retaining Ring

Bolt

Cap Screw

This valve has no compatibility with E300NB-L2

(surface distance, parts, and so on.)

■ 3-Way Ball Valve (E300NB)

● 3-Way 4-Seats Ball Valve (E300NB-L4/T4) A valve with T shaped port. Also, L shaped port type can be provided.

This valve is used for switching, spliting, or mixing fluids.



DN

approx.Mass (kg)


unit: mm

Class


PartsMaterials




SCS13A SCS14A

New-PTFE

SUS304 SUS316

New-PTFE

New-PTFE

New-PTFE

New-PTFE

SUS316

SCS13A

SUS304

New-PTFE

SUS304

SCPH2

SUS304

SUS304

SUS304



Body

Cover

Flange

Ball

Seat

Spacer

Spring

O-Ring

Stem

Key

Gasket

Gasket

Bearing

Thrust Washer

Packing

Bearing

Thrust Washer

Washer

Gland Flange

Gland

Travel Stop

Handle

Retaining Ring

Stud Bolt/Nut

Bolt

Cap Screw

Set Screw

Port Indicator

– 13 –

PartsMaterials

127 430 215 260 340 650 81 110

152 500 250 275 352 800 460230

104 132

203 650 325 335 434 1100 260 177 226


FCD-S SCS13 SCS14 SCS16



SCS13 SCS14 SCS16

New-PTFE

SUS304 SUS316 SUS316L


NBRa FKMs

SUS420J2 SUS304 SUS316 SUS316L


PTFE

PTFE

PTFE

PTFE

PTFE

PTFE

PTFE


FCD400 SCS13

SUS304

SUS304

FCD400 + STK50

SUS304

SS400 SUS304

SS400 SUS304

S45C SUS304

S45C

SUS304

unit: mm

Note (1) Fluid temperature is less than 80˚C.

(2) Fluid temperature is less than 150˚C.

If the fluid is a kind of solvent, you might not use this valve in both temperature range depending on thesolvent type.

Connection: JIS10KRF, Class150RF

This valve has no compatibility withE300N-L2 (surface distance, parts,

and so on.)

Note: The Mass is based on stainless JIS 10K.

DN

approx. Mass (kg)

Lever Operated Gear Operated

■ 3-Way Ball Valve (E300N)

● 3-Way 3-Seats Ball Valve (E300N-L3/T3) A fixed ball valve with T shaped port. Also, L shaped port type can be provided.

This valve is used for switching, spliting, or mixing fluids.





– 14 –

Manual Ball Valves

Seat name Ball Seat

Solid Seat (Thick Plate)SCS14A + SFNi4

SUS316 + ST

Thin Seat (Thin Plate) SUS316H

Soft Seat (Reinforced PTFE) SCS14A + Buff #400 Reinforced PTFE (CF)

Body Materials/Product Code Stainless Cast Steel

Parts Name

1 SCS13A SCS14A

2 SCS13A SCS14A

3

SUS316 (ST)

4 SUS316H (Stainless for Spring)

Reinforced PTFE (CF)

7 SUS316

9 SUS316

11 SUS316

12 New-PTFE

15A SCS13A

15B SUS304

19 SUS304

Body

Insert

Ball

Seat

Stem

Trunnion

Trunnion Cover

Packing

Gland Flange

Gland

Cap Screw

■ Tough Seal Type V Port Valve (V100ND)


● Ball and Seat

SCS14A (SFNi4) · SCS14A (Buff #400)

SFNi4: Nickel based self-fluxing alloy ST: Stellite



– 15 –


● Application Features

● Pocketless Structure

The seat is provided only on one surface of the primary side, so fluid does not collect in the flow passage of the

valve or get stuck between the ball and the valve body. Accordingly, this type of valve is suitable for lines withhighly viscous fluids or fluids that include sludge and fibrous content and the like. In addition, there is no abnormal

rise in pressure as in the case of ordinary ball valves, so there is no damage to the ball, seat or other parts due to

abnormal pressure increases.

● Tough Seal

The use of a metal seat enables the valve to be used in high temperature environments, and the seat has sufficient

rigidity and flexibility to provide sealing in pressures ranging from vacuum to high pressure, without being affected

by differences in temperature and pressure.

The valve is also wear-resistant with respect to fluids containing slurry, powder and other wear-inducing

substances.

● Full Flow

When the valve is fully open, the flow passage is almost straight, reducing pressure loss and ensuring a large

capacity flow.

● Shearing Action

The V-shaped cut on the ball shuts out fibrous material, solids and so on, making the valve suitable for use on

paper and pulp factory lines.

● Precision Control

The V-shaped cut on the ball increases rangeability and enhances flowrate control performance as compared toball, diaphragm or butterfly valves.

In addition, the inherent flow characteristics are approximately equal percent characteristics.

● Configuration Features

● Integrated Body

The valve body is an all-in-one body, so there are no fluctuations in valve torque due to pipe stress and no drop in

sealing performance or external leakage.

The face-to-face specifications are in accordance with ISO 5752.

● Flexible Seat

1) Centripetal Type Seat

All three types of seat—solid, thin and soft—are provided with a clearance C for the inner diameter of the body

and the outer diameter of the seat.

Accordingly, providing a seat on the spherical surface creates a centripetal seal surface for the seat and ensures

uniform contacting.



– 16 –

Manual Ball Valves

Solid Seat (ST) Thin Seat (M)

Soft Seat (CF)

Part names and materials are listed on Page 14.


2) Sealing Principle and Major Applications

There are three types of seat: a solid (thick plate) seat, a thin (thin plate) seat and a soft (Reinforced PTFE) seat.

This makes it possible to accommodate the properties of various fluid types.

2.1) Solid (Thick Plate) Seat

The notched section provided on the rear surface of the seat clamps the insert tightly in place,enabling the proper

allowable valve seat leakage and valve torque to be provided by cantilever action.

This type of seat is used primarily for highly viscous fluids and fluids containing slurry and powder.

2.2) Thin (Thin Plate) Seat

A thin stainless steel spring is used as the thin seat. As in the case of the solid seat, the sealing principle is

cantilever action. However, the thin seat has great flexibility, so the allowable valve seat leakage and valve torque

can be set lower than in the case of the solid seat.

This type of seat is used primarily for fibrous fluids, highly viscous fluids and sludge.



Items

Applicable Nominal Size

Prssure Class

Connection Flange

Face-to-Face Dimension

Allowable Pressure Range

Allowable Temperatre Range

Body

Insert

Ball

Seat

Lever

Gear

Pneumatic

Electric

Actuator

– 17 –


2.3) Soft (Reinforced PTFE) Seat

The seat is made of Reinforced PTFE (CF). However, as in the case of 2.1) and 2.2), the principle is cantilever

action through the use of a seat spring, so stable sealing performance is provided.This type of seat is used primarily for ON-OFF control of water, gas, solvents and other cleaning fluids.

3) Seat Compatibility

The solid seat, thin seat and soft seat are compatible with one another.

● Precision Ball

The ball is a precision ball manufactured using the lost wax method. The sealing surface is coated with Nickel

based self-fluxing alloy or polished with a #400 Buffing.

The Nickel based self-fluxing alloy coated sealing surface is precision-lapped.

●Full FlowWhen the valve is fully open, the ball is almost entirely hidden on the outside of the flow path, preventing fluid

blockage and cavitation and allowing slurry and the like to pass smoothly.

● Stable Bearing Performance

The bearings provided on the sliding surfaces of the stem and

trunnion are made of a special Reinforced PTFE.

This reduces operational torque and enables the bearings to cope

with very frequent valve action.

● Gland Packing with Excellent Sealing Performance

The use of V packings that reduces clamping force and provides

excellent sealing action, enabling perfect sealing for pressures ranging from vacuum to high pressure.

Specification

DN25 to 200 (Please contact us about DN20)

JIS10K, JIS20K, Class150

JIS10KRF, JIS20KRF, Class150RF

ISO 5752

1.33 Pa to 3.4 MPa

-20 to 250°C

Described in Page 14.

DN25 to 200

DN100 to 200

DN25 to 200 Double Acting, Single Acting (Reverse Acting, Forward Acting)

DN25 to 200 Our Standard Product, Seibu Denki, Kawaden, Koei-Kougyo, Hitachi Valve

PN Type: PN04D to 12D: Polyurethane Resin Baking Paint (Silver)

PN Type: PN13D to 25D: Phthalate Resin Paint (Silver)


C o a t i n g

O p er a t i on

P ar t




● Pressure-Temperature Range

– 18 –

Manual Ball Valves

DN

unit: mm

V100ND

L L1Lever Operated Gear Operated approx. Mass (kg)

E H G F E1 Lever Operated Gear Operatedd

10K 20K

10K 20K

H1H 10K

20K 10K

20K 10K

20K 10K

20K 10K

20K 10K

20K CL150 CL150 CL150 CL150 CL150 CL150 CL150 CL150

25 127 165 72 110 48 108 160 3.8 5

38 165 190 95 120 71 135230

6.8 8.5

51 178 216 103 141 77 140 8.1 10.5

64 190 241 110 161 96 163350

13 15.5

76 203 283 113 193 101 168 14 17

102 229 305 123 199 131 209 450 311 316 165 190 62.5 77 240 300 21 26.5127 356 381 211 236 163 305

650 800384

190 230 77.0 90.5 30044 50

152 394 403 244 253 173 315 394 460 54 64

203 457 502 257 302 211 381 800 1100 457 475 230 260 90.5 121 460 86 98

20K

4981

95

150

VG100ND


10K,

CL150

3877

89

135

CF …………………

…………………

ST …………………

DN40 to 65


Temperature (°C)

DN25


Temperature (°C)

DN125 to 200


Temperature (°C)

DN80 to 100


Temperature (°C)



ANSI B16, 104 — Rank II

and IEC534-4 — Rank II Compliant

ANSI B16, E104 — 1/20of Rank IV

and IEC534-4 — Rank IV-S1 Compliant

—

Solid Seat (St)

Thin Seat (M)

Soft Seat (CF)

Category

Rated Cv: less than 0.5 %

Rated Cv: less than 0.0005 %

No Leakage

Reference value Description

– 19 –


● Allowable Seat Leakage Amount

L i q ui d

G a s

S t e am

General

Viscous Fluid

P

P

P

P

Cv = 11.56V

Cv = 11.56VR

Cv =

Cv =

Cv =

Cv =

25 28 40 25 23 50 25 21 65 25 20

40 75 50 40 68 65 40 60 80 40 55

50 153 65 50 127 80 50 110 100 50 95

65 250 80 65 218 100 65 185 125 65 165

80 350 100 80 312 125 80 270 150 80 245

100 540 125 100 480 150 100 430 200 100 360

125 930 150 125 835 200 125 675 250 125 575

150 1,320 200 150 1,11 0 25 0 150 950 300 150 830

200 2,000 250 200 1,80 0 30 0 200 1,620 350 200 1,500

Fluid Type Formula

(P1 – P2)

G

Q

2.93 P (P1 P2)

G (273 t)

0.1391 P (P1 P2)

WK

0.1205P1

WK

2.538P1Q G (273 t)

(P1 – P2)

G

V: Max Flow (m3 /hr)

G: Gravity (Water = 1, Air = 1)

P1: Primary Pressure (kPa · A)P2: Secondary Pressure (kPa · A)

P: P1 – P2 (kPa)

R: Viscosity Correction Factor

t: Temperature (°C)

Q: Max Flow (15.6°C, 101.3 kPa · A)

W: Max Flow (kg/hr)

K: 1+ (0.0013 x Superheat °C)

Superheat = t – t1

Where “t” is saturation temperature

relative to primary absolute pressure“P1,” and “t1” is primary temperature.

For saturated steam, assumes that

superheat becomes 0.

● Cv Calculation Type ● Density Correct Value

● Flow Coefficient Cv Value and Flow Calculation

● Flow Coefficient Cv Value

Note: We can provide another type of solid seat which leaks less than 0.002 %.

Note: 1. Viscosity correction factor R is applied when the fluid is less than 20cSt.

2. Pulp concentration correction can be calulated by mutiplying Cv value with K1.

(Please use viscous fluid formula.)

concentration(%)

1

2

3

4

5

Correction factor(K1)

1

1.1

1.2

1.4

1.9



Rank

A

B

C

Factor Combination

3a

2a + b, a + 2b

2a + c, 2b + c

a + b + c, 3b

2c + a, 2c + b

a

b

c

a

b

c

a

b

Factor Condition

Seat

Material

Fluid

State

Fluid

Temp.

New-PTFE (NTF)

Reinforced PTFE with Carbon Fiber (NCF)

Reinforced PTFE with Grass Fiber (NGR)

Clean (less than 100CP)

Sludge, Solvent, Viscous (100 to 500CP)

Extraneous Materials (Slurry, Iron Powder), Powder, Viscous Fluid

-20°C to 150°C

-21°C to -100°C, 151°C to 200°C

= Air Consumption (NR) = Volume of Air Room (R)

= Pressure (MPa) = Operate # of Times (1 time = 1 rotation

to to

Double Acting

Q=[(10P+1) x ( A+B)] N

Single Acting

Q=(10P+1) B x N

Double Acting

Q={[( A+B) x 2] x (10P+1)} x N

Single Acting

Q=[( A+C) x (10P+1)] x N

0.08

0.15

0.3

0.6

1.1

2.2

1.83

3.86

7.88

14.0

0.1

0.2

0.4

0.8

1.5

3.0

1.56

3.39

6.88

11.6

3.13

5.07

6.88

11.6

RActuator

Code

B

B

B

B

B

B

C

C

C

Seat Action

RankON-OFF Control

Usage ConditionNote 1

SelectionNote 2 C a t e g o r y

Clean Fluid

Sludge, Viscous Fluid (less than 500CP)

Fluid with Fiber

Soft Powder State (No Solids)

Soft Powder State (with Solids)

Heavy Viscous Fluid (Rubbery State)

Slurry, Hard Powder State

– 20 –


■ Usage Condition Vs. Valve Grade

Mandatory torque power to activate the valves depends on usage conditions such as fluid state, fluid temperature,

seat materials, or shutoff differential pressure, even if their nominal size is the same. Please consider your usage

condition when you select actuators.

Note 2: Selection: Recommended : Possible

: Not Recommended : Not Suitable

Category 5 contains fluids with abrasion.

Because they may cause parts degradation,

it is hard to predict their life time.

● Valve Type: V100ND

● Valve Type: F100NB, E100JNC, E300NB, E300N

Note 1: Categoly

1: Water, Gas, Solvent, etc.

2: Sludge (no solids), Molasses, Pulp,

White Water, etc.

Food Powder (such as flour) falls freely.

3: Food Powder or Resin Powder with less abrasion

4: Latex, Viscose, etc.

5: Coal Ash, Powder Cokes, Nylon (including Pellet)

CF

M

CF

M

ST

M

ST

M

ST

ST

■ Air Consumption

Air consumption shows amount of multiplication air which are necessary for one round trip of cylinder’s operation.

The more operation times increases, the more air consumption increases.

● Volume of Air Room ● Calculation of the Air Consumption

Double Acting

Single Acting



Part names

Indicator

Pressure Coil Spring

Spring Cover

Spring Bearing

Spring Bearing Bolt

Hexagon Head Bolt

Hex Socket Set Screw

Hexagon NutSeal Washer

Plain Washer

Parallel Pin

C Shaped Snap Ring

C Shaped Snap Ring

Bearing

Bearing

Bearing

Thrusut Bering

Thrusut Bering

Thrusut Bering

Thrusut Bering

O-Ring

O-Ring

O-Ring

O-Ring

Plug

Materials

Polypropylene

Spring Steel

AC2A

S20C, FCD400*

SUS304

SUS304

SUS304

SUS304

SUS304SS400+NBR

SPCC

SUS630

SUS304

SUS304

Polyacetal

Polyacetal

SS400+fluorocarbon

Polyacetal

Polyacetal

SUS304

SUS304

NBR

NBR

NBR

NBR

C3602

No.

48

50

51

52

53

70

74

75

7678A

78B

80

81A

81B

82A

82B

82C

83A

83B

83C

83D

85A

85B

85C

85D

91A

● Configuration

– 21 –

No.

40

41

42

4344

45

46

47

● Materials

Part Names

Cylinder

Piston

Scotch Yoke

Drive ShaftCober A

Cober B

Nameplate

Cap

Type PO/PC

(Cylinder: 04D to 12D)

Type PN

(Cylinder: 04D to 12D)

■ Torque Actuator

● Standard Specificaation

● Operating Style: Double Acting, Single Acting (Reverse Acting, Direct Acting)

● Usage Pressure: 0.4 MPa (MAX 0.7 MPa)

● Rotation Limit: 0° to 90° (Part-Turn)

● Manual operation: Manual open-close device can be installed.

To operate double acting type using a lever, you can

choose to set up a bypass between OPEN and CLOSE

air chambers, or to release air.

Standard Configuration: Please see the materials teble.

● Actuator Ambient Temperature: -10°C to 50°C

● Installation: Free direction, but in case of mounting air filter, drain outlet

of it should always turn to ground.

● Accesories (Optional): Valve Positioner, Solenoid Valve, Air Devices, Limit Switch.

● Open-Close Time Controller (Optional): We will set up the speed controller

according to your needs.

● Coating (Body): Platinum Silver (if stainless body, no coating)

(Actuator): Platinum Silver

Materials

ADC12, AC2A*

FCD400

SMF5030, S45C*

SCM435 ADC12, AC2A*

ADC12, AC2A*

A1100P

ABS

✽: Shows the Matrials for Actuator 10D and 12D

Cross-Recessed PanHead Machine Screw



– 22 –


15

20

25

40

50

65

80

100

125

150

200

Pressure: 0.4 MPa

DN RankDouble Acting

Shutoff Differentioal Pressure: MPa

PN-04D

PN-05D

PN-05D

PN-06D

PN-06D

PN-08D

PN-10D

PN-12D

PN-13D

PN-13D

PN-18D PN-22D

Single Acting


PO-05D

PO-08D

PO-10D

PO-12D

PO-13D

PO-18D

PO-22D PO-25D

DNRank

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

15

20

25

40

50

65

80

100

125

150

200

PO-06D

PO-12D

PO-04D

Pressure: 0.4 MPa



Single Acting


DNRank

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

25DPN-22D

PO-22D

PO-25D

250

300

350

250

300

350

● Valve Type

Double Acting: EKPN1100N-250/350 (Trunnion ball)

Single Acting: EKPO1100N-250/350 (Trunnion ball)

■ 2-Way Pneumatic Valve

● Actuator Selection Table

● Valve Type

Double Acting: FPN1100NB-15/200

Single Acting: FPO1100NB-15/200

PN-25D

PN-18D



10K,CL150

20K,CL300

3.9

4.85.7

7.29.0

16.218.9

27.636.5

48.542.654.6

71108.5

131191

147207

260358

492

3.5

4.45.2

6.78.3

15.417.3

2633

4536.148.1

59.597

118178

133193

235333

467


169

181185

201215

254262

308336

367346377

411466

505576

525596

641752

789

238

300

350

434

552

700

552

700

869

1013

869

1013

12721671

PO-04D

PO-05DPO-05D

PO-06DPO-06D

PO-08DPO-08DPO-10D

PO-10DPO-12D

PO-10DPO-12D

PO-12DPO-13D

PO-13DPO-18D

PO-13DPO-18D

PO-18DPO-22DPO-25D

20K,CL300

10K,CL150

– 23 –


FPN1100NB (Double Acting, Full Port)

1 5

2 0

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

FPN1100NB

FPO1100NB

unit: mm

FPN1100NB

3.44.1

4.55.7

6.29.7

10.713.417.4

20.823.3

29.435.1

50.560.5

82.599

98.5115

152168205

285

3.03.6

4.05.0

5.58.9

9.911.815.8

17.319.8

22.928.6

3949

69.586

84.5101138

143180

260

169173

185187

199217

233241262

269290

300346

381411

450505

470525596

579641

752

B/2B/2

144

172144

172

214

266

214266

336420

336

420

644

420644758

644758

988

PN-04DPN-04D

PN-05DPN-04D

PN-05DPN-05D

PN-06DPN-06DPN-08D

PN-06DPN-08D

PN-10DPN-12D

PN-10DPN-12D

PN-12DPN-13D

PN-12DPN-13D

PN-18DPN-13DPN-18D

PN-22D

140

152

165

190

216

241

283

305

381

403

502

108

117

127

165

178

190

203

229

356

394

457

13

19

25

38

51

64

76

102

127

152

203

1 5

2 0

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

DN d

L

10K,CL150


20K,CL300

ActuatorCode

B B1 B2


10K,CL150

20K,CL300

unit: mm

DN d

L


Actuator

Code B B1 B2

● Valve Type: FPO1100NB (Single Acting, Full Port)

13

19

25

38

51

64

76

102

127

152

203

108

117

127

165

178

190

203

229

356

394

457

140

152

B/2

547

634

547

634

7781036

B/2

322

379

322

379

494635

165

190

216

241

283

305

381

403

502



approx.Mass (kg)

ActuatorCode

Actuator

Code

– 24 –


50

65

80

100

125

150

200

250

B/2 B/2

547 322

634

547

379

322

1/2

50

65

80

100

125

150

40PN-04D 144

B/2 B/2

217221

233232

244263

279288

309324

345355399

412445

495550

515570

641625

687

6.46.6

7.07.8

8.313.6

14.616.5

20.523.8

26.333.439.1

55.065.0

90.5107

121.5138

175207244

PN-05D 172144PN-04D

PN-05D 172

214PN-06D

PN-08D 266214PN-06D

PN-08D 266

336

420

PN-10D

PN-12D

PN-13D 644

420644

758644758

PN-12DPN-13D

PN-18DPN-13DPN-18D

3/4

350

250

200

1 5 13

19

25

38

51

64

76

102

127

152

203

108

117

127

165

178

190

203

229

267

292

330

60

65

70

75

80

85

90

2 0

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

FlangeNominalSize

10K, CL150

approx.

Mass (kg)

■ Ball Valve (Jacketed)


EPN1100JNC

PN04D to 12D

EPN1100JNC

PN13D to 18D

EPO1100JNC

PN04D to 12D

EPO1100JNC

PN13D to 18D

unit: mm

● Valve Type: EPO1100JNC (Single Acting, Jacketed)

1/2

40

PO-04D 238 217229233

249260

301309

355391

422401

432

445500

550621

570641

687

6.9

7.88.2

9.711.1

20.122.0

30.739.5

51.546.6

58.6

75.5113

139199

170230

299

PO-05D 300

350

434

552

PO-06D

PO-08D

PO-10D

PO-12DPO-10D

700552

PO-12D 700

869PO-13D

PO-18D 1013

869

634 379

PO-13D

PO-18D 1013

3/4

350

13

19

2538

51

64

76

102

127

152

203

108

117

127

165

178

190

203

229

267

292

330

60

65

70

75

80

85

90

1 5

2 0

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

FlangeNominalSize

10K, CL150

unit: mm

● Valve Type: EPN1100JNC (Double Acting, Jacketed)



PN-13D

PN-13D PO-18D

PN-10D

– 25 –

PO-25D



● Valve Type

Double Acting: EPN1300NB-L2-15/200

Single Acting: EPO1300NB-L2-15/200

15

20

25

40

50

65

80

100

125

150

200

Pressure: 0.4 MPa



PN-04D

PN-05D

PN-08D

PN-06D

PN-10D

Single Acting


PO-05D

PO-08D

PO-12D

PO-13D

PO-22D

DNRank

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

15

20

25

40

50

65

80

100

125

150

200

PO-06D

PO-10D

PO-04D

15

20

25

40

50

65

80

100

125

150

200

Pressure: 0.4 MPa



PN-04D

PN-04D

PN-18D

PN-22D

Single Acting


DNRank

A

B

C

A

B

C

A

B

C A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

15

20

25

40

50

65

80

100

125

150

200

PN-10D

PO-13D

PN-05D

PN-08D

PN-05D

PO-18D

PO-22D

● Valve Type

Double Acting: EPN1300NB-T4L4-15/100 EPN1300N-T3L3-125/200

Single Acting: EPO1300NB-T4L4-15/100 EPO1300N-T3L3-125/200

PN-06D

PO-12D

PN-12D

PO-06D

PO-08D

PO-10D

PN-06D

PN-08D

PN-12D

PN-13D

PN-18D

PO-18D



– 26 –


3796341013PO-18D

379

322

634

547

322547

1013

869

PO-18D

PO-13D


● Boundary Dimension● Valve Type: EPN1300NB-L2 (Double Acting)

44.7

5.16.6

7.111.2

12.215

1922.8

25.329.435.1

48

5883.5

100

102.5119

156185

222

169173

185187

199217

233241

262269

290300346

381

411450505

470525

596579

641

B/2B/2

144

172144

172

214

266214

266

336

420

644

420644

758644

758

PN-04D73

75

85

100

115

130

140

170

185

215

260

146

150

170

200

230

260

280

340

370

430

520

13

19

25

38

51

64

76

102

127

152

203

PN-05DPN-04D

PN-05D

PN-06D

PN-08DPN-06D

PN-08D

PN-10D

PN-12D

PN-13D

PN-12DPN-13D

PN-18DPN-13DPN-18D

Stenless Cast Steel

ActuatorCode

approx.Mass (kg)

unit: mm

● Valve Type: EPO1300NB-L2 (Single Acting)

4.5

5.46.3

7.89.9

17.720.5

29.238.550.5

42.654.6

68.5106

132192

151211277

169

181185

201215254

262

308336367

346377

411466

505576

525596641

B/2B/2

238

300

350

434

552

700

869

PO-04D73

75

85100

170200

2538

115

130

140

170

185

215

260

146

150

230

260

280

340

370

430

520

13

19

51

64

76

102

127

152

203

PO-05D

PO-06D

PO-08D

PO-10D

PO-12D

PO-13D

Stenless Cast Steel

Actuator

Code

approx.

Mass (kg)

unit: mm

PO-12D

PO-10D

700552



Stenless Cast Steel

approx.Mass (kg)

Stenless Cast Steel

approx.Mass (kg)

13026076

12024064

165330102

10K,CL150

20K

– 27 –


● Boundary Dimension● Valve Type: EPN1300NB-L4/T4-15A/100A (Double Acting)

EPN1300N-L3/T3-125A/200A (Double Acting)

EPN1300N-T3

EPN1300NB-T4

EPO1300NB-T4

4.8

5.25.3

5.79

1012.416.4

20.1

2632

4047

57

114119

146183258

315

5.4

5.85.8

6.29.8

10.814.618.5

21.427.1

29.535.5

4555

6187

186

198186

198210

226240261

286332

297343

370385

415470

448502514

586626

759

B/2B/2

144

172144

PN-04D

PN-05DPN-04D

172

214

266

PN-05D

PN-06D

PN-08D

644

758

420

644420

336

336

266

PN-10D

988PN-22D

PN-13D

PN-18D

PN-10D

PN-08D

PN-12D

PN-13DPN-12D

70

80

90

160

180

25

38

10020051

13026076

120

325

140

240

650

19

64

215

250

430

500

127

152

165330102

203

unit: mm

● Valve Type: EPO1300NB-L4/T4-15A/100A (Single Acting)

EPO1300N-L3/T3-125A/200A (Single Acting)

8

8.511.2

15.517.9

26.533.3

45.351.5

60.598

105

151211238

8.6

912

16.320.1

28.734.6

46.655

65.5103

119182

214

226

247261

307332363

374400

455470

525502

574586

717759820

B/2

322

379

322

379

494

635

547

634

547

634

778

1036

1013869

1013

1272

1671

B/2

350PO-06D

434

552

700

869

PO-08D

PO-10D

PO-18D

PO-22D

PO-25D

PO-12D

PO-13D

PO-18DPO-13D

70

80

90

160

180

25

38

10020051

325

140

650

19

215

250

430

500

127

152

203

unit: mm

10K,CL150

20K



PO-12D

PO-08D

PO-22D

PO-10D

PO-13D

PO-10D

PO-10D

PO-10D

– 28 –




● Valve Type

Double Acting: VPN1100ND-25/200

PO-22D

25

40

50

65

80

100

125

150

200

25

40

50

65

80

100

125

150

200

DN DNRank Rank

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

Single Acting


0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0

Pressure: 0.4 MPa

PO-18D

25

40

50

65

80

100

125

150

200

25

40

50

65

80

100

125

150

200

DN Rank

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

BC

A

BC

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

A

B

C

DNRankDouble Acting


0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0

PN-04D

PN-05D

PN-08D

PN-06D

PN-10D

PN-08D

PN-10D

PN-12D

PN-08D

PN-10D

PN-13D

Pressure: 0.4 MPa

PN-06D

PN-08D

PO-05D

PO-08D

PO-18D

PO-06D

PO-08D

PO-10D

PO-12D

● Valve Type

Single Acting: VPO1100ND-25/200

PN-13D

PN-10D

PN-18D

PO-13D



VPN1100NDPN04D to 12D

VPN1100NDPN13D to 18D

VPO1100NDPN04D to 12D

VPO1100NDPO13D to 18D

– 29 –

25

38

51

64

76

102

127

152

203

127

165

178

190

203

229

356

394

457

55

70

75

80

90

106

145

150

200

165

190

216

241

283

305

381

403

502

55

70

75

80

90

106

145

150

200

48

71

77

96

101

131

163

173

211



● Valve Type: VPN1100ND (Double Acting)

PN-04D

PN-05D

PN-06D

PN-08DPN-06D

PN-08DPN-06D

PN-08DPN-10D

PN-08DPN-10DPN-08D

PN-10DPN-12D

PN-10DPN-12D

PN-13DPN-12D

PN-13DPN-18D

PN-13DPN-18D

144

172

214

266214

266214

266336

266336266

336420

336420

644420

644758

644758

B/2 B/2

202214243

259280

264285

299320

364325

369365

409442459

492547

502557

628611

673

5.3

6.39.3

10.313.8

11.615.1

1719

24.520

25.527.5

334150.5

67.5

77.594

128

165

6.5

7.511

1215.5

1417.5

19.521.5

272328.5

33

38.546.556.5

73.590

87.5104

141140

177

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

10K,CL150

approx.Mass (kg)

20K L L1 L L1

10K CL150

20K

unit: mm

● Valve Type: VPO1100ND (Single Acting)

25

38

51

64

76

102

127

152

203

127

165

178

190

203

229

356

394

457

55

70

75

80

90

106

145

150

200

165

190

216

241

283

305

381

403

502

55

70

75

80

90

106

145

150

200

48

71

77

96

101

131

163

173

211

PO-05D

PO-06DPO-08D

PO-06DPO-08D

PO-10DPO-08DPO-10D

PO-12DPO-08D

PO-10DPO-12D

PO-10DPO-12D

PO-10DPO-12D

PO-13D

PO-18D

PO-13D

PN-18D

300

350434

350434

552434552

700434

552700

552700

552700

869

1013

869

1013

547 322

634

547

379

322

634 379

B/2 B/2

214230

251259

280

324285

329362

320364

397369

402409

442497

547618557

628673

7.38.8

11.812.3

15.8

23.817.1

25.138.1

21.529.5

42.531

4440

5391

116

126

186220

8.510

1314

17.5

25.519.5

27.540.5

2432

4534

4745.5

58.597

122

182136

196232

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

10K,CL150

approx.Mass (kg)

20K L L1 L L1

10K CL150

20K

unit: mm



Applicable Actuator

Manufacturer Code

Allowable Pressure

Joint Size

Manufacturer

Note

● Speed Controler

Rain Proof (Box with Built-In) Explosion Proof Rain Proof Explosion Proof

Input-Output

Manufacturer Code

Joint Size

Supply Pressure

Signal

Linearity

Hysteresis

Air Consumption

Note

– 30 –


■ Accesories

04D to 12D 04D to 13D 18D, 22D, 25D

ASN2-01 AS2200-02 AS2000-02 AS4000-03

0 to 0.99 MPa 0.1 to 0.7 MPa 0.05 to 0.99 MPa 0.05 to 0.99 MPa

Rc1/4 Rc3/8

SMC

—

Product Code

Applicable Actuator

Handle Rotations

● Manual Operated Unit

MT1

04D to 08D

approx. 43 Times

MT2

10D to 12D

approx. 45 Times

Yamatake Corporation

04D · 05D 06D · 08D 10D · 12D 04D to 12D 13D, 18D, 22D, 25D

LS1A LS1B LS20

Guard Type

Applicable Actuator

In-House Code

Manufacturer Code

Manufacturer

Rated Voltage

● Limit Switch

V-5114E 1LX5001 1LS19-J 1LX5001

16A-125, 250V 5A-125, 250V 10A-125, 250, 480V 5A-125, 250V

0.6A-115V 0.8A-125V 0.4A-125V

0.3A-230V 0.4A-250V 0.2A-250V

AC

DC

● Solenoid Valve

Drip Proof Rain Proof Explosion Proof Drip Proof Rain Proof Explosion Proof

04D to 12D 13D 18D 22D 25D

ES1 ES20 ES30 — — —

VF3190 VF3190A 50-VF3190A 4F310-08,10 4F310-08,10-B 4F310E-08,10

AC100/110V · 50/60Hz, 200/220V · 50/60Hz AC100/110V · 50/60Hz, 200/220V · 50/60Hz

Rc1/4

13.52

SMC CKD

Guard Type

Applicable Actuator

In-House Code

Manufacturer Code

Rated Voltage

Joint Size

Effective Section Area

Manufacturer

13D: Rc1/4 · 18D to 25D: Rc3/8

13D: 25mm2 · 18D to 25D: 32mm2

● PositionerPneumatic – Pneumatic Electric – Pneumatic (Explosion Proof)

NP22 NE22

Rc1/4

0.4 to 0.7 MPa

20 to 100 kPa 4 to 20mmA DC

Within 1.5%F.S

Within 1%F.S

15NR /min 13NR /min

(assumes 0.4 MPa as supply pressure) (assumes 0.4 MPa as supply pressure)

Actuator 04D to 06D equip speedcontroller as default

● Air Filter Regulator

04D to 13D 18D, 22D, 25D

AW20-02EH-CR-X2127 AW20-02EH-2R-X2126 AW30-03EH-R-X2159 AW30-03EH-2R-X2160

Rc1/4 Rc3/8

0.05 to 0.85 MPa

5 micron

with Case Guard Metal Case (ADC12) with Case Guard Metal Case (ADC12)

SMC

Use XR108-S/MORI (made by SSS) for positioner

Applicable Actuator

Manufacturer Code

Joint Size

Available Pressure Scope

Filtering Accuracy

Filter Case

Manufacturer

Note

Directly attach to

ES1 to ES30

Only for Exhaust Throttle

Not for ES1 to ES30.

For intake throttle with

PO/PC.

Directly attach to the

valves except ES1 to

ES30, and Positioner



– 31 –

MEMO



– 32 –


■ Actuator Models and Features

● Model SRH (manufactured by SEIBU ELECTRIC & MACHINERY CO., LTD.)

● Comparatively lightweight, compact drive section using aluminum alloy and engineering plastic

● Can only accommodate single-phase AC power

● No built-in torque switch

● Motor is protected by a built-in thermal protector

● Can be operated manually using a hexagonal wrench, but has no built-in interlock switch

● Can be used as a regulating valve through the attachment of a Seitroller (Electric positioner) and potentiometer

● Model SRJ (manufactured by SEIBU ELECTRIC & MACHINERY CO., LTD.)

● Comparatively lightweight, compact drive section using aluminum alloy

• Degree of Protection: IP68 (units are available for use in underwater)

● Can accommodate either single-phase or three-phase AC power

• SRJ-1, 2 are impossible of use by single-phase three-wire.

● Motor is protected by a built-in torque switch and thermal protector; torque switch also prevents damage caused by

excessive valve torque

● With manual operation hundle

• Changeover lever for selectively change auto/manual mode, (and after turning on the power, automatically reset)

● Flameproof enclosure model (Exd II BT4/IEC) also available

● Can be used as a regulating valve through the attachment of a Seitroller (Seitrolle includes a function of Seimitter)

● Model SHA and SD# (SEIBU ELECTRIC & MACHINERY CO., LTD.)

● Sturdy drive section made up of primary and secondary reduction gear of Ductile Cast Iron

● Can accommodate three-phase AC power

● Built-in torque switch protects the motor and also prevents damage caused by excessive valve torque;

a thermal relay should be used on the panel side to ensure that motor is protected completely

● Two types of manual-solenoid switching models available: a site priority model and a central control priority mode

● Built-in interlock switch provided only on site priority models

● Many other optional specifications available, including single-phase motor model, DC motor model, regulating valve

model and so on.

● Model PMK (manufactured by KAWADEN CO., LTD.)

● Comparatively lightweight, compact drive section using aluminum alloy

● Can accommodate only single-phase AC power

● No built-in torque switch

● Motor protected by built-in thermal protector

● Two drive section models available: unidirectional step rotating model (Model C) and reversible model (Model S)

● Model C can be operated manually using a spanner or the like. (Model S cannot be operated manually but can be fitted

with an optional pin clutch manual mechanism)

When selecting the type of drive section, make your selection from the features listed above, the valve aperture diameter,

the valve material, the Specification Actuator listed on page 32, and the Actuator Selection Table on pages 35–45.



– 33 –

Type

Max Toqrue N · m

Open-Close time (Sec/90°) 50/60Hz

Power (V)

Output Power (W)

Insusation

Brake

Torque Limit Switch

Space Heater (W)Lead Connection

Ambient Temperature

Apparatus for Protection

Terminal

Manual Operation

68.6 196 588

12/10 12/10 18/15Single-phase 100/110, 200/220

10 40 100

Type E

Implemented

Not Implemented

8

AC250V 5A/DC125V 0.4A (Dielectric Load)

2-G1/2

-10°C to 50°C

IP55/JPW55 (Rein Proof)

Screw Size M3.5 x 12P

Manual Operation by using Hexagonal Wrench

Type

Max Toqrue N · m

Open-Close time (Sec/90°) 50/60HzPower (V)

Output Power (W)

Insusation

Thermal Protector

Torque Limit Switch

Space Heater (W)

Contact Capacity

Lead Connection

Ambient Temperature


Terminal

Manual Operation

490 970 1.568 3.038 5.880 8.624

35/29 35/29 35/29 36/30 36/30 35/29

3-phase 200/220, 400/440

0.1 0.2 0.4 0.75 1.5 2.2

Type E (Type H is optional)

Not implemented

Implemented

10 30


2-G1 2-G1,1-G3/4 (for Motor)

-10°C to 50°CIP55/JPW55 (Rein Proof)

Screw Size M4 x 28P, Motor M4 x 3P Screw Size M4 x 36P

Manual/Electrical Switching Lever

Options: • Electrical Control Device: Potentiometer, Seimitter, Seitroller

SRJ-010-7 SRJ-010 SRJ-020 SRJ-060 SRJ-1 SRJ-2

70 125 250 600 1000 2000

18/15 36/30

Single-Phase 100/110, 200/220 3-Phase 200/220, 400/440 ✽

40 100 200

Options: • Protection of Electrical Apparatus: Flameproof Enclosure (Exd II BT4) • Electrical Control Device: Potentiometer, Seimitter, Seitroller✽ : SRJ-1, 2 is impossible of use by single-phase three-wire.

● SRH Torque Actuator

● SRJ Torque Actuator

● SHA and SD# Torque Actuators

Options: • Electrical Control Device: Potentiometer, Seimitter, Motor with Brake

● PMK Torque Actuator

Options: • Electric to Electric Positioner, Potentiometer, Middle Switch, Space Heater, DC Power

Type

Max Toqrue N · m


Power (V)

Output power (W)

Insusation

Brake

Thermal Protector

Torque Limit Switch

Space Heater (W)

Contact Capacity

Lead Connection

Ambient Temperature


Terminal

Manual Operation

Type

Max Toqrue N · m


Power (V)

Output power (W)

Insusation

Brake

Torque Limit Switch

Space Heater (W)

Contact Capacity

Lead Connection

Ambient Temperature Apparatus for Protection

Terminal

Manual Operation

■ Actuator Specification

29.4

8/6.5

58.8

7.5/6

68.6

7.5/6

147

22.5/18

313.6

35.5/28.5

588

50/40

784

50/40

20W 25W 25W 25W 25W 40W 40W

AC single-phase 100/110, 200/220

Type E

Mechanical Brake

Not Implemented

Semi-Complient (10W)1-G1/2 2-G3/4

-10°C to 50°C

Drip Proof (corresponding to IP54)

Standard: Screw Size M3 x 8P

Actuator's bottom axis can be manipulated

M o t or

M o t or

M o t or

M o t or

Type B

Permanent Brake

Built-in Motor

Implemented

5 to 8


3-G1

-10°C to 50°C

IP68 (Available use for Underwater)

Screw Size M4 x 32P, Motor M4 x 3P

Automatic Return, with Manual Handle



Circuit

TP

0

S

AC

Swtching contact

24V

200V

100V

Inside Vector Control Motor Outside Vector Control Motor

COM

LS2

LS1

M C

2

1

T3

T2

T1

– 34 –


● SRH

● SRJ

● SHA and SD#

● PMK

Legends

Clockwise Rotation Limt SwitchCounterclockwise Rotation Limit SwitchClockwise Rotation Torque SwitchCounterclockwise Rotation Torque Switch

M: Motor TH: Themal Protector H: HeaterC: Condenser POT: Potentiometer (option)

Rotation Direction

Clockwise Rotation at:Single-Phase: R-U, T-X 3-Phase: R-W, S-V, T-UCounterclockwise Rotation at:Single-Phase: R-V, T-X 3-Phase: R-U, S-V, T-EThe direction is based on the sight from the actuator toward valve.

Terminal

No.

1 – 4

5 – 6

1 – 8

9 –10

: ON : OFF

Switch

RLS 1

RLS 1

RLS 1

RLS 1

Clockwise

Counterclockwise

Rotation Direction

ClockwiseEnd

Counter-clockwiseEnd

ON=Overtoque at Clockwise End StopOFF=Overtoque at Clockwise End StopON=Overtoque at Counterclockwise End StopOFF=Overtoque at Counterclockwise End Stop

Heater Power TerminalTerminals of Ptentionmeter

13 – 14:1 – 4:

17 – 18:1 – 8:

31 – 32:27, 28, 29:

RLS1, RLS2:LLS1, LLS2:RTS1, RTS2:LTS1, LTS2:

■ Internal Circuit

Rotation Direction

Clockwise rotation at and

Counterclockwise rotation at and

The direction is based on the sight from the actuatortoward valve.

Legends

RLS1: Clockwise Rotation Limt Switch (closed)

RLS2: Clockwise Rotation Limt Switch (closed)

LLS1: Counterclockwise Rotation Limt Switch (opened)

LLS2: Counterclockwise Rotation Limt Switch (opened)

M: Motor TH: Themal Protector

H: Heater C: Condenser

POT: Potentiometer (option)

1 – 2: OFF=Both Opened

4 – 3: ON =Both Opened

5 – 6: OFF=Both Closed

8 – 7: ON =Both Closed

9 – 4: ON =Overtorque at Opened Switch

10 – 4:ON =Overtorque at Opened Switch

or Manually Disconnected

Please assemble the interlock circuit so that the motor will not be activated manually.

T1 – T3: Counterclockwise rotated when turnng on, stopped when both switches are opened.T2 – T3: Clockwise rotated when turnng on, stopped when both switches are closed.

Open signal will be submitted at pre-defined stop position of LS1.

Close signal will be submitted at pre-defined stop position of LS2.

M: Motor

C: Condenser

TP: Thermal Protector

11 – 14:

12 – 14:

13 – 14:

H1,H2:

U,V,W:

ON = Overtorque at Closed Switch

ON = Overtorque at Closed Switch

or Manually Connected

ON = Manually Connected

Heater Terminal,

Power is Supplied from Circuit

Motor Terminal



SRH-007

SRH-007

DN

15

20

25

40

50

65

80

100

125

150

RankShutoff Differential Pressure (MPa)

Actuator

– 35 –

Happrox.Mass(kg)

Ductile, Cast Steel, Stainless Steel Cast Steel, Stainless Steel Code A B C D

1 5 SRH-007 13 108 45 13 140 054 215 7.5

2 0 SRH-007 100 108 75 60 19 117 50 19 152 059 220 8.52 5 SRH-007 25 127 52 25 165 060 235 10

SRH-007 100 108 75 60 250 134 0 38 165 75 38 190 078

SRH-020 121 135 90 63 270 17SRH-007 100 108 75 60 260 17.5

5 0 51 178 80 51 216 090SRH-020 121 135 90 63 280 22SRH-007 100 108 75 60 290 23

6 5 64 190 87 64 241 097SRH-020 121 135 90 63 310 27SRH-020 121 135 90 63 350 31

8 0 76 203 97 76 283 108SRH-060 158 164 133 85 345 36SRH-020 121 135 90 63 350 42

1 0 0 102 229 115 102 305 125SRH-060 375 47

1 2 5 SRH-060 158 164 133 85 127 356 145 127 381 168.5 415 78

1 5 0 SRH-060 152 394 165 152 403 188.5 435 93

unit: mm

Note: The weight is based on stainless, JIS 10K.

ABC ABC ABC ABC ABC ABC AB

C ABC ABC ABC



● FSR4100NB (SRH Actuator)


SRH-020

SRH-060

DN

Please contact us about mounting position of the Actuator.



– 36 –


Actuator

Actuator

DN

1 5

2 02 5

4 05 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

160186 104272167

245

130316191202

191130

354316

267191

240202

191354267240

unit: mm





● FMSJ4100NB (SRJ Actuator)


DN Rank Shutoff Differential Pressure (MPa) 3.02.82.62.42.22.01.81.61.41.21.00.80.60.40.2

A

BC ABC ABC ABC ABC ABC A

SRJ-010-7

SRJ-020

SRJ-010

SRJ-020

SRJ-1

SRJ-060

SRJ-2

BC ABC ABC ABC ABC

200

15

20

25

40

50

65

80

100

125

150

18.7

19.521.4

24.727.2

35.5

42.0

66.0

67.094.0

119115

140

180

18.3

19.020.8

23.925.6

63

7071

76.586

103

124

135

158

178

235

140

152165

190216

241

283

305

381

403

502

13

1925

3851

64

45

5051

70.580.5

87

97

116

148

173

207

108

117127

165178

190

203

229

356

394

457

13

1925

3851

328

333346

367376

415

426

454

493530

595550

615

664

SRJ-010-7

SRJ-010-7

SRJ-010-7

SRJ-010SRJ-010

SRJ-010SRJ-020

SRJ-010SRJ-020

SRJ-020

SRJ-060SRJ-060

SRJ-1SRJ-060

SRJ-1SRJ-1

SRJ-2

64

76

102

127

152

203

32.0

7635.5

102

55.0

56.080.0

106102

127

127

152

203153

approx.Mass(kg)

approx.Mass(kg)



DN H

SDB-075

125

150

200

Rank Shutoff Differential Pressure (MPa)1.0 2.0 3.0

– 37 –

Ductile, Cast Steel, Stainless Steel Cast Steel, Stainless Steel

Actuator

Code A B E F I1 2 5

1 5 0

2 0 0

ABC ABC ABC

unit: mm




● FSH4100NB, FSD4100NB (SHA and SDB Actuator)



SHA-02

SHA-04

SHA-02 127 356 145 127 381 168.5 657 135

SHA-02152 394 165 152 403 188.5 677 150

SHA-04 100 113 453 140 260

SHA-02185

SHA-04 203 457 200 203 502 228.5730

SDB-075 120 130 567 156 395 745 240

DN



250

300

350

SDE-15

ABC

250

300

350

RankShutoff Differential Pressure (MPa)

0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

– 38 –


unit: mm



ABC ABC



● EKSH4100N (SHA and SD# Trunnion Type Actuator)


Please contact us about other Nominal Size in the above table.

SHA-04

SDB-075

SHA-04SDB-075

SHA-04SDB-075SDB-075

SDE-15

100120

100

120

164

113130

113

130

175

453567

453

567

657

140156

140

156

195

260395

260

395

432

250

300

335

450

600

700

225

300

350

250

300

335

533

610

686

266.5

305

343

765780

830886911

966

280340360

420530

610

DN

DN H

Cast Iron Ductile, Cast Steel, Stainless SteelJIS10K, CL150

ActuatorCode A B E F I



7.7

8.810.7

13.213.416.5

16.619

21.624

27.931.7

4042.5

61

68.589

86

102

140

281

285314

331

340

406

370427

437477

472502

624

538

680

736

13 108 45 13 140 54

19 117 50 19 152 5925 127 52 25 165 60

38 165 75 38 190 78

51 178 80 51 216 90

64 190 87 64 241 97

76 203 97 76 283 108

102 229 115 102 305 125

127 356 145 127 381 168.5

152 394 165 152 403 188.5

203 457 200 203 502 228.5

140 56 122

200 73 199

200 73 199

152

140152

200

152

63

5663

73

63

134

122134199

1341 2 5

1 5 0

2 0 0

1 0 0

1 5

2 02 5

4 0

5 0

6 5

8 0

PMK-600YSP

A

BC ABC

PMK-600YSP

PMK-060SS

PMK-080SS

PMK-080SS

DN

15

20

25

40

50

65

80

100

125

150

200

Shutoff Differential Pressure (MPa)

– 39 –

DN Actuator

Code A B B1

H approx.Mass(kg)

Ductile, Cast Steel, Stainless Steel Cast Steel, Stainless Steel

d L L1 d L L1


● FPMK4100NB (PMK Actuator)



unit: mm


ABC ABC ABC ABC ABC ABC

ABC ABC ABC

PMK-010SS

PMK-300YS

PMK-030SS

PMK-600YS

131 75.5 75.5

140

131 75.5 75.5

PMK-300YS

PMK-300YS

PMK-300YS

PMK-300YS

PMK-600YS

PMK-600YS

PMK-600YSP

PMK-010SS

PMK-600YSP

PMK-010SS

PMK-010SS

PMK-030SS

PMK-010SS

PMK-030SS

PMK-060SS

PMK-030SSPMK-060SS

PMK-080SS

PMK-060SS

PMK-080SS

PMK-060SS

PMK-080SS

56 112



– 40 –



● ESR4300NB-L2-15/150, ESR4300NB-T4 (L4) -15/100, ESR4300N-T3 (L3) -125/150

(SRH Actuator)


unit: mm

Valve Type L2 T4 (L4) & T3 (L3)

0.2 0.4 0.6 0.8 1.0 0.2 0.4 0.6 0.8 1.0

15

20

25 SRH-007 SRH-007

40

50SRH-020

SRH-007

65 SRH-020

80 SRH-020

SRH-020

100SRH-060

125 SRH-060

SRH-060

150

1 5 SRH-00719

146 73220 10.5

2 0 SRH-007 150 7525 160 80 235 13.0

2 5 SRH-007 100 108 75 60 25 170 85 235 13.0

4 0 SRH-007 38 200 100 250 17.0 38 180 90 259 17.5SRH-007 260 22.0 284 23.5

5 0 51 230 115 51 200 100SRH-020 121 135 90 63 280 26.5 304 27.5SRH-007 100 108 75 60 290 30.0 314 30.0

6 5 64 260 130 64 240 120SRH-020 310 34.0 335 34.0121 135 90 63SRH-020 320 39.0 334 40.5

8 0 76 280 140 76 260 130SRH-060 158 164 133 85 355 45.5SRH-020 121 135 90 63 350 55.0 361 49.5

1 0 0 102 340 170 102 330 165SRH-060 375 60.0 382 54.5

1 2 5 SRH-060 158 164 133 85 127 370 185 415 86.5 127 430 215 413 1031 5 0 SRH-060 152 430 215 435 108 152 500 250 425 126




ABC ABC ABC ABC ABC A

BC ABC ABC ABC ABC

DN Rank

DN Actuator L2 T4 (L4) & T3 (L3)

Code A B C D d L L1 H d L L1 Happrox.

Mass(kg)approx.

Mass(kg)



DN

– 41 –

19

253851

64

146150

170200230

260

7375

85100115

130

334

345361370

414

670

25

3851

64

76

102

127

152

203

160

180200

240

260

330

430

500

650

80

90100

120

130

165

215

250

325

347

371409

419

436

463502

528

593540

605

649

24

28.532.5

39.5

45.5

6271

111

138132

161

224203 520 260

188

76

102

127

280

340

370

140

170

185

152 430 215

453492

470530

550

615

590

44

67.576.5

8594

114

141

185

186 167 272 104 160

202

186202

240202

240

202

240

191

167191

267191

267

191

267

316

272316

354316

354

316

354

130

104130

191130

191

130

191

245

160

245

SRJ-010-7

SRJ-010-7

SRJ-010-7

SRJ-010SRJ-010

SRJ-010SRJ-020

SRJ-010SRJ-020

SRJ-020SRJ-060

SRJ-020SRJ-060

SRJ-1SRJ-060

SRJ-1SRJ-2SRJ-060

SRJ-1SRJ-2

1 52 0

2 54 05 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

ABC

unit: mm


0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

Actuator L2 T4 (L4) & T3 (L3)

Code A B E J W d L L1 H d L L1 H


Please contact us aboutthe Actuator of mounting position.



● EMSJ4300NB-L2-15/150, EMSJ4300NB-T4 (L4) -15/100, EMSJ4300N-T3 (L3) -125/150

(SRJ Actuator)


ABC ABC ABC ABC A

BC ABC ABC ABC ABC ABC

15

20 SRJ-010-7

25

40

50 SRJ-010

SRJ-010

65

80 SRJ-020

100 SRJ-020

SRJ-060

125SRJ-060

150

200 SRJ-1

SRJ-2

20.5

242831

39.5

424

SRJ-010-7

SRJ-2

SRJ-1

DN Rank

approx.Mass(kg)

approx.Mass(kg)




● ESH4300NB-L2-125/200, ESH4300N-T3 (L3) -125/200

(SHA Actuator)


– 42 –


ABC ABC ABC

unit: mm

Valve Type L2 T3 (L3)

0.2 0.4 0.6 0.8 1.0 0.2 0.4 0.6 0.8 1.0

125SHA-02

150 SHA-02

200 SHA-04

1 2 5 SHA-02 127 370 185 657 145 127 430 215 655 165SHA-02 677 165 185

1 5 0 152 430 215 152 500 250 667SHA-04 100 113 453 140 260 190SHA-02 255

2 0 0 203 520 260 730 210 203 650 325 710SHA-04 260




SHA-04

DN

Code A B E F I d L L1 H d L L1 H

Actuator L2 T3 (L3)DN approx.

Mass(kg)approx.

Mass(kg)



– 43 –


● EPMK4300NB-L2-15/200, EPMK4300NB-T4 (L4) -15/100, EPMK4300N-T3 (L3) -125/200

(PMK Actuator)




Actuator L2 T4 (L4) & T3 (L3)

Code A B B1 d L L1 H d L L1 H

1 5

2 0

PMK-300YS 146 73 9.919 140 70

316

11.419 307

10.3150 75PMK-300YS 11.8PMK-300YS 314 13.12 5 25 170 85

PMK-600YS131 75.5 75.5

13

12.8

PMK-300YS331

16.2

16.4

4 0 38 200 100 38 180 90

25 160 80

PMK-600 YSP

PMK-600YS341

17.117

PMK-600YS340

19.8

5 0 PMK-600 YSP 51 230 115 19.9 51 200 100 365 20.6PMK-010SS 140 56 122 422 23

PMK-600YS370

26.9 131 75.5 75.5

6 5PMK-600 YSP

64 260 13027

64 240 120

PMK-010SSPMK-030SS

427 29.4 432 29.5466 32

140 56 122152 63 134

PMK-010SS 455 35.58 0 76 280 140 76 260 130

PMK-030SS 152 63 134140 56 122

485 38

PMK-010SS 140 56 122 472 50

437 33.9

1 0 0 PMK-030SS 152 63 134 102 340 170 502 52.5 102 330 165 512 47

PMK-060SS 200 73 199 634 65.5

PMK-030SS 152 63 134 538 77.5 1 2 5 PMK-060SS 127 370 185 660 95 127 430 215

658 111200 73 199PMK-080SS

1 5 0PMK-060SS

152 430 215 680 114 152 500 250 670 134PMK-080SS

200 73 199PMK-060SS

736 1612 0 0 203 520 260 PMK-080SS

DN approx.Mass(kg)

approx.Mass(kg)

unit: mm

ABC


Rank0.4 0.80.6 1.2 1.6 2.00.2 1.0 1.4 1.8

PMK-300YS

PMK-300YS

PMK-600YS

PMK-600YS PMK-600YSP

PMK-600YSP

PMK-600YSP

PMK-010SS

PMK-010SS

PMK-010SS

PMK-030SS

PMK-030SS

PMK-060SS

PMK-060SS

080SS

PMK-080SS

PMK-080SS

080SS

15

20

25

40

50

65

80

100

125

150

200

ABC ABC ABC ABC ABC A

BC ABC ABC ABC ABC

Shutoff Differential Pressure (MPa)

0.4 0.80.6 1.2 1.6 2.00.2 1.0 1.4 1.8

Shutoff Differential Pressure (MPa)DN



– 44 –


Pressure: 0.4 MPa

2 5 SRH-007 48 248 25 127 72 25 165 110 9.5 10.54 0 SRH-007 100 108 75 60 71 276 38 165 95 38 190 120 13.0 14.5

SRH-007 283 14.5 16.05 0 77 51 178 103 51 216 141

SRH-020 121 135 90 63 303 0

SRH-007 100 108 75 60 31420.0 21.5

6 5 96 64 190 110 64 241 161SRH-020 121 135 90 63 334 23.5 25.0

SRH-007 100 108 75 60 319 21.0 23.08 0 SRH-020 121 135 90 63 101 339 76 203 113 76 283 193 25.5 27.0

SHR-060 158 164 133 85 364 32.0 33.5SRH-020 121 135 90 63 375 43.0 36.5

1 0 0 131 102 229 123 102 305 199SRH-060 400 40.0 43.5

1 2 5 SRH-060 158 164 133 85 163 451 127 356 211 127 381 236 64.5 70.51 5 0 SRH-060 173 461 152 394 244 152 403 253 75.5 84.5

25 25

SRH-007

40 40

50 50

SRH-007

65 65

SRH-007 SRH-020

80 80SRH-060

100 100

125 SRH-060 125

150 150

unit: mm



ABC ABC ABC ABC ABC ABC ABC ABC

ABC ABC ABC ABC ABC ABC ABC ABC


● VSR4100ND (SRH Actuator)



DN Rank Rank DNFluid Differential Pressure (MPa)

1.0 2.0 3.0

Actuator

Code A B C DH1 H

JIS10K, CL150 JIS20K approx. Mass (kg)d L L1 d L L1 CL150 CL300

DN



– 45 –

unit: mm



1.0 2.0 3.0

25

40

SRJ-010

SRJ-010-7

50

65SRJ-020

80SRJ-020

SRJ-010

SRJ-020

SRJ-020

100

SRJ-060

125SRJ-1

150

SRJ-1

200SRJ-2

A A

B B

C C

A A

B B

C C

A AB B

C C

A A

B B

C C

A A

B B

C C

A A

B B

C C

A A

B B

C C

A A

B B

C C

A A

B B

C C

25

40

50

65

80

100

125

150

200

Pressure: 0.4 MPa

RankFluid Differential Pressure (MPa)

RankDN DN

2 5

4 05 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

SRJ-010-7

SRJ-010SRJ-010

SRJ-010SRJ-020SRJ-010

SRJ-020SRJ-010

SRJ-020SRJ-060

SRJ-020SRJ-060

SRJ-1SRJ-020

SRJ-060SRJ-1

SRJ-060SRJ-1SRJ-2

186

202

186202

240186

202240

202

240

167

191

167191

267167

191267

191

267

272

316

272316

354272

316354

316

354

104

130

104130

191104

130191

130

191

160

245

160

245160

245

48

7177

96

101

359

388394

25

3851

127

165178

55

7075

25

3851

165

190216

55

7075

523

512572

637522

582647

616

442

447

484

64

76

190

203

80

90

64

76

241

283

80

90

696

131

163

173

211

102

127

152

203

229

356

394

457

106

145

150

200

102

127

152

203

305

381

403

502

106

145

150

200

A BJIS 10K, CL 150 JIS 20K

E J W d L L1 d L L1H1 H

52.0

66.569.0

10076.0

79.0107118

20.5

25.025.5

32.5

33.5

50.5

163

57.5

72.575.0

10686.0

89.0117130

21.7

26.727.9

35.0

36.5

56.0

175

DNCode

Actuatorapprox. Mass(kg) approx. Mass(kg)



● VMSJ4100ND (SRJ Actuator)




Special Valves

– 46 –

■ 3-Way Type-Y Ball Valve Configuration and Features

● Major Applications

Type-Y ball valves are ideally suited for use with fluids containing powders, slurry or other highly wear-inducing fluids and

highly viscous fluids, or for cleaning the interior of pipes including valves, or to allow the passage of pigs or spheres in order to

avoid contamination from (mixing of) different fluid types.

● Features

1Wide Angle Body Shape

Whereas ordinary 3-way ball valves have a bending angle of 90°, type-Y valves have a wide bending angle of 135° to

enable the passage of pigs or spheres to clean the pipe interior.

2 Selectable Mounting Position

Two types of flange are available: a straight flange and one with a 22.5° bend. These two types of flange can be

mounted at any three locations to enable various mounting patterns.

3 Ideal Ball Design

The integrated ball and stem unit is held in place by bearings at the top and bottom, forming an ideal trunnion (fixed ball)

system. The ball radius of curvature is at least 1.5 times the size of the aperture. This reduces pressure loss and

minimizes damage to the body and ball from highly wear-inducing fluids (as compared to a 90° three-way valve).

4 Primary Side Seal Mechanism

The spring at the seat rear surface (rubber cushion for DN100 and below; metal spring

for DN125 and above) provides excellent sealing even in the event

of temperature cycles and pressure fluctuations. Moreover,

the valve seals at the primary (entrance) side seat,

helping to prevent functioning from being impaired

by powder flowing into the pockets.

5 O-Ring Seal

O-Rings are used at each seal, providing

stable sealing performance and eliminating

the need for periodic tightening.

6 Stable Bearing Performance

Special Reinforced PTFE bearings

are used for the bearings for the shafts

above and below the ball.

This prevents galling and enables

the valve to cope with very frequent operation.

7 Purge Holes

There are two plugs on the body.

Blowing charges of air into the pockets helps prevent powder from flowing in and also makes it possible to check for

leaks caused by seat wear as well as purge the powder remaining in the pockets and so on.



– 47 –

Seat Details

4 44A 5 4B5 4B4C 54C 5 44B 44B

SMTF, CF, NTF SMCFRS

DN25 to 100 DN125 to 300

Body

Packing Box

Flange

Ball

Seat

Seat Retainer (CFRS)

O-Ring

Shim

Seat Spring

O-RingO-Ring

Pivot

Thrust Washer

O-Ring

Shim

Bolt

Trunnion Cover

O-Ring

Bearing

Bolt

Bolt

Plug

CF

CFRS

SM

Items

Nominal Size DNPressure Class

Flange

Allowable Pressure


Code

1

1

2

3

4

4

4

4

5

88

9

9

9

9

10

11

12

12

18

18

S

Part Name Materials Notes

SCS13A

SCS13A

SCS13A

SCS13A

SCS13A + ENP or Hcr

Reinforced PTFE

Reinforced PTFE

Reinforced PTFE + SUS304

SUS304

NBR (FKM*

SUS316

Silicon rubber

SUS329J4L

NBR (FKM)*

NBR (FKM)*

SUS304

Reinforced PTFE

NBR (FKM)*

SUS316

SUS304

SUS304

NBR (FKM)*

SUS316 + Reinforced PTFE

SUS304

SUS304

SUS304

for SM seat

DN25 to 100

DN125 to 300

DN25 to 300

DN125 to 300

DN25 to 100

DN25 to 100

DN125 to 300

DN200 to 300

DN200 to 300

DN200 to 300

DN200 to 300

DN200 to 300

DN200 to 300

C

A

B

C

A

A

B

C

D

A

A

Body

Ball

Seat

Manual

Automatic

● Configuration and Materials

Specification

25 to 300JIS10K

JIS10KRF ANSI CL150

1.4 MPa

150°C

SCS13A, SCPH2*, FCD400*

SCS13A, SCS13A + ENP

Reinforced PTFE (CF), Semi-Metal Seat (SM), Metal Seat (ST)*

Lever (below DN150), Gear (above DN200)

Pneumatic, Electric

Primary

Parts

Operation

✽: If fluid temperature will reach 80°C, FKM should be used instead of NBR

✽: SCPH2, FCD400, and the metal seat are options.

■ 3-Way Type-Y Ball Valve Specification


DN200~300

DN25~150

B90111

S

21

A8C1

31C9

A948281

S

9D



Special Valves

– 48 –


● Example of Formation

Codes

WN-1N

WN-2N

WN-3N

WN-4N

WN-5N

WN-6N

WN-7N

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

2 5 0

3 0 0

RankDN

B

C

B

C

B

C

BC

B

C

B

C

B

C

B

C

B

C

B

CB

C

Rank

B

C

Seat Fluid (Example)

CF CFRS

SM

Actuator Codes

WN-1N

WN-2N

WN-3N

WN-2N

WN-3N

WN-4N

WN-5N

WN-6N

WN-7N

WN-7N (Pressure 0.6 MPa)

Cylinder Volume (R)

Air Consumption(NR)

(Pressure 0.4 MPa)

approx.

Mass

(kg)


Clockwise

0.47

1.1

2.2

4.0

8.5

16.5

29.0

Clockwise

2.3

5.4

11.0

20.0

42.0

81.0

141.0

Counterclockwise

0.47

1.1

2.2

4.0

8.5

16.5

29.0

Counterclockwise

2.3

5.4

11.0

20.0

42.0

81.0

141.0

11

18

28

47

86

156

256

● Allowable Pressure: 0.7 MPa

● Allowable Temperature: –15 to +80°C

● Rotation Degree: 135°

● Joints: RC1/4 (If WN is not greater than 4N)

RC3/8 (If WN is greater than 5N)

● Manual Op. : Lever (If WN is not greater than 5N)

Gear (If WN is greater than 6N)

● Coating: Platinum Silver

● Specification

Optionrhv

Oil, Sludge, Viscous Fluid (less than 500 CP),

Soft Powder (without Solids)

Hard Powder, Soft Powder with Solids, Slurry,

Highly Viscous Fluid (Rubber State)

Formation 1 Formation 2

Pressure: 0.4 MPa

■ 3-Way Type-Y Ball Valve

● WN Pneumatic Actuator

Feature

This actuator is designed only for 3-Way Type-Y Ball

Valves, which rotates 135 degrees.

It provides high transmission efficiency and stability

because of its simple rack-and-pinion architecture.

Allowable pressure reaches 0.7 MPa.



DN

25

40

50

65

80

100

125

150

200

250

300

– 49 –

L 5

44.6

44.9

49.1

47.4

59.9

63.3

44.1

30.1

47.8

60.3

68.8

L 3

027

031

035

043

046

064

075

090

111

130

165

DN

25

40

50

65

80

100

125

150

200

250

300

d

025

038

051

064

076

102

127

151

200

249

298

L

230

250

280

320

360

460

530

580

760

800

1000

L 2

180

199

224

264

291

384

446

507

650

714

898

L 4

070.4

080.1

090.9

112.6

120.1

166.7

195.9

234.9

292.2

339.7

431.2

D

100

130

156

186

208

276

310

356

470

524

624

H

122

152

163

198

212

255

271

292

H1

328

393

422

E

250

350

350

670

670

970

1350

1350

● Manual Valve

H

H 1

L 1

050

051

0560

069

076

084

073

110

086

102


● Bounding Dimension (for a Basic Model and Manual Valves)

● Dimension of a Basic Model

Note: Gear operation model is applied

if DN value reaches 200.



14

38

Special Valves

– 50 –

DN

2 5

4 0

5 0

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

2 5 0

3 0 0

H H1 B E Rc

31

39

45

39

45

65

72

90

122

454

520

624

520

624

828

916

1204

1558

171

196

216227

239

248

266

279

300

354

380

402

423

440

508

530601

631

246

271

316327

346

348

373

386

430

484

520

542

563

674

742

773844

874

Actuator Codes

WN-1N

WN-1N

WN-2NWN-2N

WN-3N

WN-2N

WN-3N

WN-3N

WN-4N

WN-4N

WN-5N

WN-5N

WN-5N

WN-6N

WN-6N

WN-7NWN-7N

WN-7N

H

H 1

E

RcRcCounter

Clockwise Clockwise


● Boundary Dimension (Pneumatic Valve)

● Pneumatic Valve



– 51 –

C o m p o s i t i o n S t y l e









No.

No.

No.

No.

No.

No.

No.

No.

No.

01

07

13

19

25

31

37

43

49

02

08

14

20

26

32

38

44

50

03

09

15

21

27

33

39

45

51

04

10

16

22

28

34

40

46

52

05

11

17

23

29

35

41

47

53

06

12

18

24

30

36

42

48

54


● Flange Application Models



■ Top Entry Ball Valve (T100S, H)

● Features

Welding is easy because its ball and seat can be taken out from the top.So it is suitable for dangerous fluid whose leakage is critical.

● Nuclear energy plant

● Reprocessing plant for nuclear fuel

● Other systems that no leakage is mandantory.


Special Valves

– 52 –

Valve Type

T100 S T100 H

Corrosible or Radioactive Fluid

8 to 100

Class 150 Class 300

SW (Socket Welding), BW (Butt Welding)

1.4 MPa 2.1 MPa

100°C 150°C

Body SCS13A, SCS14A, SCS16A, SCS19A

M a t er i al s

Ball SUS304

Seat PTFE Reinforced PTFE

Reinforced PTFE (V-ring)

Packing FKM (O-Ring) FKM or Perfluoro (O-Ring)

Gasket SUS304 + Expanded Graphite (Scroll Shaped)

Items

Nominal Size DN

Pressure Class

Joint

Allowable Pressure


Fluid Type



d d1 L H H1 H2 A B E hCode C m

Actuator approx.

Mass

(kg)

DN

d d1 L H1 H2 A B E

approx.

Mass(kg)

DN


● Lever Operation Valve

– 53 –

8 8 8108 75 20 52 56 100 0.9

1 0 10 10

1 5 13 13 108 95 23 65 68 130 1.3

2 0 19 19 117 99 26 69 71 130 1.8

2 5 25 25 165 114 32 86 90 160 2.8

4 0 38 38 165 148 42 116 119 230 6.8

5 0 51 51 216 158 55 177 157 230 11

6 5 64 64 241 169 63 187 184 350 15

8 0 74 74 283 172 73 208 206 350 21

1 0 0 98 98 305 223 95 256 252 450 35

unit: mm

8 8 8176 122 20 52 56 70 93 2.5PO-04D 212

1 0 10 10 108

1 5 13 13 193 133 23 65 68 80 108 PO-05D 268 13 to 16 4

2 0 19 19 117 210 142 26 69 71 80 120 6PO-06D 314

2 5 25 25 233 165 32 86 90 100 103 7

4 0 38 38165

286 209 42 116 119130

151 PO-08D 392 17 to 21 20

5 0 51 51 216 338 239 55 177 157 156 PO-10D 500 20 to 26 28

6 5 64 64 241 393 280 63 187 184160

241 46PO-12D 634

8 0 74 74 283 403 290 73 208 206 233 52

1 0 0 98 98 305 551 391 89 256 252 285 350 POH-140D 823 89

unit: mm

10 to 13

26 to 33

15 to 18

● Piston Pneumatic Valve



Operation Type Hydraulic Pneumatic

Balls Floating Ball Trunnion Trunnion

Valve Code EKTON1100N EKTPNH1100N

Nominal Size DN 200 to 350A 200 to 350A

Allowable Pressure 21 MPa 0.4 to 0.7 MPa

Bodyt: FC200 (FCD400 for ND less than 100A)

Materials Ball: SCS13 (Hard chromeplate)

Seat: R.PTFE (Containing carbon fiber)

Operation Type Lever Gear Rachet Lever

Balls Floating Ball Floating Ball Trunnion Floating Ball Trunnion

Valve Code ETGJ100N EKTGJ100N ETRH100N EKTGRH100N

Nominal Size DN 125 to 200A 200 to 350A 65 to 200A 200 to 350A

Bodyt: FC200 (FCD-S for ND less than 100A)

Materials Ball: SCS13 (Hard Chromeplate)

Seat: R.PTFE (Containing Carbon Fiber)

F100NB

65 to 100A

ET100N

125 to 150A

■ Ball Valve for Shield Use

Ball Valves for Shield Tunneling Method

● Features

● Compact and Robust.

● Wealth of operation types such as Manual Lever, Manual Rachet Lever, Hydraulic, and Pneumatic.

FTON1100NB

65 to 100A

ETON1100N

125 to 200A

6 5

8 0

1 0 0

1 2 5

1 5 0

2 0 0

2 5 0

3 0 0

3 5 0

E H E G H W1 W2 B1 B2 H

Lever Operated Gear Operated Hydraulic

d L1 L2DN

Special Valves

– 54 –

64 190 87350

135 15.5 211 24

76 203 97 145 19.5 108 272 74 110 221 29

102 229 115 450 175 30.5 248 40

127 290 145650

260 57280 160

250 84 304 80

152 330 165 280 72 270 98 153 379 100 148 324 96

203 400 200 800 350 110 315 200 325 147 377 143

250 450 225 450 295 385 280 457 260195 458 130 184

300 600 300 415 430 534 390

335 700 350 560 375

440 620 225 528 160 202 561 640

unit: mm

● Specification

● Manual Type

● Automatic Type


approx.Mass(kg)

approx.Mass(kg)

approx.Mass(kg)



Seibu Electric&

Machinery

Pneumatic

Hydraulic

Manual

Cartegory

Electric

– 55 –

Legend of Product Codes

Valve Specification

Code Description

none Floating Ball

K Trunnion Ball

T For Shield Use

H Supports High Temperature

R O-Ring Implemented (Gland)

TR Throttle Device

Options

Code Description

L Angle-Limitter on Open Side (for Double Acting)

R Angle-Limitter on Close Side (for Double Acting)

H Manual Operation Device (for Single Acting)

WLever Handle (for Double Acting)

Clamp Handle (for Single Acting)

T Angle-Limitter (for Double Acting)

L Manual Handle (for Single Acting)

Operation Category

Code Description

none Manual Valve

1 Switching Valve (On/Off)

3 Control Valve

4 Electric Valve

Valve Forms

Code Description

1 2-Way Full Bore

2 2-Way Reduced Bore

3 3-Way4 4-Way

Accessories

Code DescriptionP Positioner

M Dual Limit Switch

MW Limit Switch for Open and Close

MS Limit Switch for Close

MO Limit Switch for Open

E Solenoid Valve

F Filter

R Reducing Valve

K Oiler with Oil Supply Device

V Air Filter Regulator

Z Triple (Double) Set

CW Speed Controller for (both Open and Close) Side

CO Speed Controller for Open SideCS Speed Controller for Close Side

Q Quick Exhaust Valve

B Bypass Valve

Operation Type

Code Descriptionnone Standard Lever

G Gear

ES Extended Stem

EX Extended Gland

PNDouble Actiong

Opened/Closed under Pressure

POReverse Acting

Opened under Pressure, Closed by Spring

PCDirect Acting

Closed under Pressure, Opened by Spring

PN-✽✽T 2 Staged Open/Close, Double Acting

PO-✽✽T 2 Staged Open/Close, Single Acting

WN 3-Way Type-Y Double ActingON Hydraulic

SR SRH

MSJ SRJ

SH LTRH + BRL

MK PMK-S Kawaden

Special Body

Code Description

J Jacketed

Valve Type

Code Description

E Type-E Valve

D Type-D Valve

F Fire-Safe Valve

V Tough Seal V Port Valve

T Top Entry Valve

Y 3-Way Type-Y Valve

Valve

Type

Valve

Spec.

Operation

Type

Options

Accessories

Operation

Category

Valve

Forms

Body

Materials

Special

Body

Improvement

Code

Seat

Materials

Nominal

SIze

Connection Actuator

Codes

Seat Materials

Code Description

NTF New-PTFE

NCF PTFE Containing Carbon Fiber

NGR PTFE Containing Glass Fiber

CFM Outer-Diameter-Reinforced CF

GRM Outer-Diameter-Reinforced GR

CFMO Outer-Diameter-Reinforced CF with O-Ring

CFMR Inner/Outer-Diameter-Reinforced CF

CFMRO Inner/Outer-Diameter-Reinforced CF with O-Ring

CFRS CF/Retainer with Spring

CB Carbon

ST Metal Seat with StellitedM Thin Seat

SM Semi-Metal

SM/S Semi-Metal Seat with Spring

PE Polyethylene

PF PFA

none Initial improvement

N First improvement

NB Second improvement

NC Third improvement

ND Fourth improvement

Body Materials

Code Description

00 A Set of Top Devicesfor Auto Valve

01 FC200

04 FCD400 or FCD-S

05 SCPH2

07 SCS13, 13A

12 SCS14, 14A

13 SCS16, 16A



The ISO 9001 · 14001 certificate was awarded

CAUTION

Specifications and performance figures of products contained in this catalog are on the design calculations, in-house tests,

actual records of product application, and the official standards and specifications. They are presented as the user guide on

the use of product concerned under general service conditions. Users intending to use the product under a special condition

are required to receive engineering advice from this company in advance or to make their own studies and evaluation to verify

performance on their own responsibility. This company shall not be liable for any damages, material or human, that may arise

without following this procedure. In as much as full care was taken in editing this catalog, users are kindly requested to make

contact with this company for any questions or discrepancies found. This catalog is subject to change without notice for the

purpose of correcting error, supplementing or improving insufficient content, updating the content to the improved product

performance, design change, discontinuation of product and other reasons. Revised version automatically invalidates catalogs

issued prior to the current version. When you select products for possible order placement, please check the issuance code

number on the back of your catalog and verify with this company that it is the latest version.

NIPPON DAIYA VALVE CO., LTD.

1-3-22, Hiro-machi, Shinagawa-ku, Tokyo 140-0005

Tel. TOKYO (03)3492-3031 Fax. TOKYO (03)3492-5676

1-3-22, Hiro-machi, Shinagawa-ku, Tokyo 140-0005

Tel. TOKYO (03)3490-4801 Fax. TOKYO (03)3490-7950

Takakura Bldg., 2-5-9, Awaji-machi, Chuo-ku, Osaka-shi Osaka 541-0047

Tel. OSAKA (06)6203-7721 Fax. OSAKA (06)6222-5895

2-42, Kamitakahata, Nakagawa-ku, Nagoya-shi, Aichi 454-0873

Tel. AICHI (052)354-3171 Fax. AICHI (052)354-3174

2-2-4, Tate-machi, Kokurakita-ku, Kitakyushu-shi, Fukuoka 803-0818

Tel. FUKUOKA (093)571-2438 Fax. FUKUOKA (093)591-3277

651-101, Imamura, Kita-ku, Okayama-shi, Okayama 700-0974

Tel. OKAYAMA (086)241-2669 Fax. OKAYAMA (086)244-3540

Head Office:

TOKYO Sales Department:

OSAKA Sales Department:

NAGOYA Sales Office:

KITA-KYUSHU Sales Office:

OKAYAMA Local Office:

ball valve cateloge

Documents