BUCKET ATTACHMENT

See Model Charts For DetailsSELECTING THE RIGHT BUCKET FOR YOUR BOBCAT LOADER NEEDS®

FEATURES AND BENEFITS OF GENUINE BOBCAT CONSTRUCTION/INDUSTRIAL AND LOW PROFILE BUCKETS

Side Cutting EdgesGive better performance, increased strength and longer life to your bucket when working in tough digging situations.

3/4 in. x 6 in.Cutting EdgeHigh carbon steel for longer wear.

Replaceable Cutting EdgesYour Bobcat dealer has weld-on or bolt-onedges available.

“Waffle” Type Skid PlateBacks up the cutting edge and adds strength to the bottom of the bucket for longer life.

Low HeelMakes cutting grade and backdragging easier.

StepsMake entering and leaving the loader easier for the operator.

Flat BackAssures a secure attaching area for the Bob-Tachmounting system.

Channel DesignTop and bottom bucket sections are a formed channel design to provide extra strength and durability. On 74 in. and 80 in. widths, the channel is double-walled.

Low BackGives better cuttingedge visibility.

Round Back DesignEnhances bucket loading and cleanout.

HEAVY-DUTY CONSTRUCTION/INDUSTRIAL BUCKETS OFFER EVEN MORE FEATURES REQUIRED FOR SEVERE-DUTY USE:

• Side cutting edges: 3/8 in. thick versus 5/16 in. thick on standard buckets

• Cutting edge: 3/4 in. X 8 in. versus 3/4 in. X 6 in. on standard buckets

• Mounting frame: 3/8 in. for improved life and durability

• Visibility: heavy-duty buckets have better cutting edge visibility than standard C/I buckets

• Top channel crossmember: double-walled• Bolt-on corner cutting edge standard

Cast Mounting FrameImproves service life of bucket mount area by approximately three times.

FEATURES AND BENEFITS OF GENUINE BOBCAT® GENERAL PURPOSE AND DIRT BUCKETS Withstands the power of smaller Bobcat loaders for daily use; also works well for light,

occasional use on some of our larger machines.½ in. x 4 in.Cutting EdgeHigh carbon steel for longer wear.

Replaceable Cutting EdgesYour Bobcat dealer has weld-on or bolt-onedges available.

StepsMake entering and leaving the loader easier for the operator.

Low BackGives better cuttingedge visibility.

Fabricated Mounting FrameComplies with SAE J2513 and ISO 24410 standards.

Skid Bar Design Backs up the cutting edge and adds strength to the bottom of the bucket for longer life.

Round Back DesignEnhances bucket loading and cleanout. Flat Back

Assures a secure attachment area for the Bob-Tach™ Mounting System.

HD indicates Heavy-Duty Bucket (recommended for severe-duty use).* Buckets have holes predrilled to accept bolt-on cutting edges.> Buckets have holes predrilled to accept bolt-on cutting edges and bolt-on teeth.

BUCKETS A Inches

B Inches

C Degrees

SAEHeaped

Cap

Weight lb. MT50 MT52 MT55 463 553 S100 753/

S130 S150

36 in. C/I> 19.0 25.0 65 4.0 167 125.0 130.0

36 in. Utility> 21.3 28.0 70 6.4 190 71.9 75.0 106.7

36 in. Dirt> 19.9 24.8 70 4.7 168 106.2 110.4 153.6

36 in. GP> 19.9 30.0 70 6.0 185 80.3 83.7 117.5

44 in. Dirt> 19.9 24.8 70 5.8 188 82.6 86.0 99.5 121.0

44 in. GP> 19.9 30.0 70 7.4 207 62.2 73.5 75.4 92.3

50 in. Dirt> 19.9 24.8 70 6.6 202 104.2 139.8 151.5

50 in. GP (463)> 19.9 30.0 70 8.5 223 78.5

50 in. GP> 19.9 30.0 70 8.5 223 106.1 115.2

54 in. Fertilizer & Grain* 22.6 33.6 60 14.7 337 135.4

56 in. GP> 19.9 30.0 70 9.4 239 94.3 102.4 141.9

56 in. C/I> 21.5 29.4 70 10.8 428 106.0

56 in. Low Profi le> 21.5 33.2 70 13.1 428 87.4

60 in. Fertilizer & Grain* 19.9 36.6 60 16.6 428 73.2 96.8

62 in. GP> 19.9 30.0 70 10.5 257 125.3 162.7

62 in. C/I> 21.5 29.4 70 12.7 465 87.2 118.1

62 in. Low Profi le> 21.5 33.2 70 14.5 483 75.2 102.2

66 in. Snow & Light Material* 26.6 39.1 70 23.9 502 44.8 61.2

66 in. Fertilizer & Grain* 28.5 46.4 60 30.3 500 48.3

68 in. GP> 19.9 30.0 70 11.6 274 145.8

68 in. C/I> 21.5 29.4 70 14.0 470 106.8

68 in. Low Profi le> 21.5 33.2 70 16.0 515 90.6

72 in. Fertilizer & Grain* 28.5 46.6 60 32.8 507

74 in. GP> 19.9 30.0 70 12.7 290 131.9

74 in. C/I> 21.5 29.4 70 15.4 533 93.0

74 in. C/I Heavy-Duty> 24.1 38.1 70 20.5 681

74 in. Low Profi le> 21.5 33.2 70 17.6 533 81.4

74 in. Snow & Light Material* 26.9 42.0 70 26.8 620 35.6 50.2

78 in. Dirt 24.3 32.4 70 20.1 584

78 in. Dirt (w/ teeth) 24.3 32.4 70 20.1 639

80 in. C/I> 21.5 29.4 70 16.7 565

80 in. C/I Heavy-Duty> 24.1 38.1 70 22.4 731

80 in. Low Profi le> 21.5 33.2 70 19.1 586

80 in. Snow & Light Material* 26.9 42.0 70 26.8 651 49.2

88 in. C/I Heavy-Duty> 24.1 38.1 70 24.6 775

88 in. Snow & Light Material* 26.9 42.0 70 29.1 693

100 in. Snow & Light Material> 33.7 48.5 70 54.2 878

Bucket Specifi cations

A. Back height of bucket

B. Bucket length

C. Bucket back angle

50 S160 S175 S185 S205 S220 S250 S300 S330 A300 T140 T180 T190 T250 T300 T320 5600

129.6

106.9

6.8 102.8 111.9 118.9 130.2 116.8 122.8

2.7 172.2 186.5 196.0 144.6

8.1 126.0 137.8 145.7 161.8

2.2 109.1 119.4 126.3 140.5 125.1 132.0

.2 65.4 71.7 75.9 84.4 93.3 105.9 128.2 75.1 79.3 52.5

8.3 51.7 56.6 59.9 66.7 73.7 83.6 101.2 59.3 62.6

5.8 154.4 167.3 175.9 129.4

6.8 113.9 124.6 131.8 146.4 161.6 183.1 221.0 130.5 137.6

0.6 96.9 106.3 112.5 125.3 138.6 157.4 190.6 111.4 117.6

67.9 77.0 92.3 102.4 92.3

1.9 139.8 151.6 159.4 116.9

3.0 99.5 109.2 115.7 129.0 142.9 162.3 194.8 216.4 194.8 111.4 121.0

100.1 114.7 139.1 155.3 139.1 78.8 83.7 116.3 140.7

.4 87.0 95.6 101.3 112.9 125.0 142.0 170.5 189.3 170.5 100.2 105.9

0.2 53.9 59.5 63.2 70.9 78.8 90.0 108.7 121.1 108.7 62.6 66.3 42.4

106.9 121.8 146.7 163.2 146.7 131.7 156.6 158.3

104.2 119.1 144.0 160.5 144.0 94.2 129.0 155.5

129.8 147.8 177.7 197.6 177.7

89.4 102.8 125.1 139.9 125.1 111.6 133.9 135.4

112.4 128.1 154.3 171.7 154.3

9.2 55.4 58.5 62.3 69.7 77.7 88.9 108.7 119.9 108.7 60.4 64.1 41.3

79.6 91.8 112.1 125.6 112.1 99.8 120.2 121.5

52.5 55.9 62.8 70.1 80.4 98.7 109.0 98.7 54.2 57.6

39.8 49.0 55.1 49.0 43.4 52.6 53.3

Rated Material Density lb. / ft.

Bolt-on cutting edges give longer wear to your loader’s bucket. Most Bobcat buckets have pre-drilled holes for bolt-on cutting edges.

Spill GuardsFor cylinder protection.• Protects twin- cylinder loaders.• Helps reduce and

prevent build-up of materials in lift-arm and Bob-Tach pivot points.

Add life to the high-wear corners of your bucket by bolting on corner cutting edges. Most Bobcat buckets have pre-drilled holes to accept bolt-on corner cutting edges.

Bolt-On Corner Cutting Edge

Get more capacity out of your C/I or low profile buckets by turning them into hard-working utility buckets—just add bolt-on side plates.

Most Bobcat buckets have pre-drilled holes to accept bolt-on side plates.

BUY GENUINE BOBCAT BUCKETS!Built Specifically For Bobcat Loaders!

®

The versatile Bobcat combination bucket is ideal for dozing, grappling, leveling, digging, loading and dumping. It’s built with heavy-duty cutting e dges and protected cylinders for long life on construction, demolition, landscaping and municipal jobs.

Combination Bucket

See your Bobcat dealer for more information on these and other buckets and bucket accessories.Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.

Bolt-On Cutting Edge

Bolt-On Side Guard

Your Bobcat construction/industrial or low profile bucket becomes a hard-working grapple with the bolt-on grapple attachment. Turn those hard-to-manage jobs into easy-to-handle jobs on the farm or at construction sites. It’s quick, easy and inexpensive.

Construction/Industrial or Low Profile Bucket (with Grapple)

The Bobcat Bucket Advantage• Engineered to match the power and capacity of your loader

• Largest selection of bucket designs

• Extra reinforcement for secure machine mounting

• Longer lasting

The Bobcat Whisker push broom quickly pins onto your bucket for a clean sweep on those small sweeping jobs. Use the Bobcat Whisker

push broom and clean up inside buildings, on driveways, sidewalks or anywhere your Bobcat loader can go.

Bobcat Whisker Push Broom

Bolt-On Side Cutting Edge Kit• Beveled• For 74"-88" heavy–duty C/I buckets

The Bucket Bite tooth bar is available to help smooth-lip buckets chew through tough digging conditions. Available for most Bobcat bucket sizes.

Bucket Bite® Tooth Bar

The 4 in. wide Hensley Bucket tooth provides additional wear surface and reduces the rate of wear at the bucket edge and corner.

Bolt-On Teeth With Replaceable PointsMade of heavy-duty cast steel. Choose from several styles: standard bolt-on tooth with four replaceable point options, standard forged point,Hensley forged tooth point, Hensley Tiger tooth point, or Hensley Twin Tiger tooth point.

For general purpose and dirt buckets.

For certain construction/industrial, low-profile and fertilizer buckets.

Side ViewLeft to right: Bob-Tach frame (A) moves into attachment flange (B) handle (C) pushes down easily, pressing wedge (D) through frame and attachment hole for solid Bob-Tach connection. (Power Bob-Tach System also available.)

Exclusive Bob-Tach™ System For Fast, Secure Attachment ChangesYour versatile Bobcat loader quickly turns into a multi-job machine with a tight-fit attachment hook-up....from bucket to grapple to pallet fork to backhoe...and a variety of other Bobcat attachments.

B-1566 (2/08)

1. Find the Material Density for the material you will be handling. (The chart below lists many materials and their corresponding density in “pounds per cubic foot.”)

2. Look at the model charts inside and find the Rated Material Density that is slightly greater than the density taken from the table.

This is the best bucket for the job and will keep theloader from being overloaded.

Example:

What bucket would be best for a S150 handling dry sand?

1. From the table below, sand has a Material Density of 105 lb./ft3.

2. The model chart for the S150 shows the 68 in. Construction/Industrial Bucket is the best bucket for the job since the Rated Material Density is slightly more than the density of the material being handled.

SELECTING THE RIGHT BUCKET FOR THE JOB:

Agricultural MaterialsMaterial lb./ft.3

Barley 39Beans 48Coffee Beans 45Corn 45Cottonseed (dry) 25

Material lb./ft.3 Fertilizers 35-70 Lime 36-53 Urea 45 MAP, DAP 60 Potash 68Flax Seed 45Hay (baled) 20

Material lb./ft.3 Oats 26Peanuts (shelled) 18Potatoes 48Rice 44Soybeans 48Sugar Beets 40Sunflowers 24Wheat 48

Construction MaterialsMaterial lb./ft.3 Cement, Portland 94Concrete 86-111Clay (damp) 110Clay (dry excavated) 63

Material lb./ft.3 Earth (wet, packed) 115Earth (dry, loose) 76Gravel 90-126Sand (dry) 90-105

Material lb./ft.3 Sand (wet) 126Sandstone 143Shale 92Stone (broken) 90-120

Miscellaneous MaterialsMaterial lb./ft.3 Ashes 35-52Bone Meal 57Charcoal (oak) 35Coal 40-58Coke 32Copper Ore 262Gypsum 159

Material lb./ft.3 Limestone 155Lye 106Malt (dry) 45Paper 58Quartz (ground) 165Rubber (scrap) 50Salt 35-48

Material lb./ft.3 Slag, Iron 172Snow (wet) 40-50Ice 37-56Sulphur 55-83Wood (sawdust) 15-20Wood (chips) 18-20

Kn-15M-208-#11710-F

Bobcat CompanyP.O. Box 6000 • West Fargo, ND 58078

www.bobcat.comPrinted in U.S.A.

Bobcat buckets offer many choices:

Light Material BucketThese are large capacity buckets for loading and handling various light materials such as snow and mulch. They have high backs to help with pushing snow, and straight sides to penetrate snow and mulch piles.

Construction/Industrial (C/I) BucketThe strongest of all Bobcat buckets. Ideal for everything from tough digging to material handling. C/I buckets offer good cutting edge visibility and excellent bucket breakout force for better digging and easier bucket filling.

W/Teeth

W/Teeth

Fertilizer BucketFertilizer buckets have large capacities and more roll-back range. The greater roll-back allows granular materials to be easily held in the bucket by minimizing spillage over the front edge. Applications include fertilizer and grain handling.

Low Profile BucketThese buckets have a longer bottom than the C/I style. They offer excellent cutting edge visibility and good bucket breakout force. Low Profile buckets are ideal for grading and leveling applications as well as material handling.

Dirt BucketsIdeal for everything from digging to material handling. Dirt buckets offer good cutting edge visibility and excellent bucket breakout force for better digging and easier bucket filling.

General Purpose BucketsThese buckets have a longer bottom than the dirt style. They offer excellent cutting edge visibility and good bucket breakout force. General purpose buckets are ideal for light-duty grading and leveling applications as well as material handling.