balancing energy and environmental demands - tuv sud · balancing energy and environmental demands...
TRANSCRIPT
Balancing energy and environmental demands Solutions that optimise the safety and performance of conventional power plants and power station systems.
TÜV SÜD South Asia
2
Meet global energy demands As demand for energy increases around the world, it is important for stakeholders in the conventional power sector to ensure operational efficiency and increase availability. To address and resolve these challenges, TÜV SÜD provides comprehensive and qualified knowledge, inspection, testing, certification and training services for existing and new conventional power plants. Our suite of services supports you throughout the entire lifecycle of your conventional power plant, from feasibility, design, procurement and construction through to commissioning, operation and decommissioning. We are experts in managing risk and improving the overall performance of conventional power plants.
Globalised and deregulated markets have increased competition and cost pressure for all stakeholders of conventional power plants. As new efficiency-increasing technologies enter the market, it is vital to make astute investments in modernising existing plants and constructing new facilities. To reduce the environmental burden, investors have to make important decisions about power plants at the planning and design stage of the project. Similarly, Engineering, Procurement and Construction (EPC) contractors have to decide on strategies to satisfy increasing safety requirements while maximising the cost efficiency of power plants. Operators face challenges of their own in ensuring the availability and productivity of power plants while achieving compliance with local and international regulations.
TÜV SÜD safeguards investments through rehabilitation management and plant status assessment services. We assess the profitability of operating old plants and advise investors on the demand necessary to construct a new facility. Our experts support EPCs in optimising the plant performance by providing knowledge services and finding potential for improvement and cost reduction in all other areas. Through our deep familiarity with the lifecycle of power plants, we assist operators in
targeted process optimisation and maintaining smooth operation. In addition, operators can be assured of maximising energy output without compromising on any of the national and international requirements.
TÜV SÜD’s ‘Global Centre of Competencies’ for conventional power plant in India caters to specific needs of market in India and Asia Pacific region. With experts with deep domain knowledge, local competencies and global experience, the centre is equipped to cater to range of knowledge services aimed at existing and new conventional power plants.
Maximise efficiency with an integrated approachEnsure power plant quality and availability without regulatory compromise
3
TÜV SÜD’s expertise in optimising operational safety, reliability and overall performance of power plants and power station systems helps protect your investment as far as environmental, power quality and cost-efficiency issues are concerned.
ASSET LIFECYCLE FEASIBILITY & PLAnnIng PROCUREMEnT COnSTRUCTIOn COMMISSIOnIng In-SERVICE REhABILITATIOn &
DECOMMISSIOnIng
COnSULTIng
DUE DILIgEnCE
LICEnSIng COnSEnTIng
TEnDER & COnTRACT MAnAgEMEnT
SITE ASSESSMEnT
DESIgn REVIEw
DESIgn APPROVAL
CLAIM MAnAgEMEnTCLAIM MAnAgEMEnT
DUE DILIgEnCE
PLAnT STATUS ASSESSMEnT
PLAnT OPTIMISATIOn
DUE DILIgEnCE
EnERgY EFFICIEnCY ASSESSMEnT
REhABILITATIOn MAnAgEMEnT
FAILURE AnALYSIS
InSPECTIOn & TESTIng
OwnER’S EngInEER
QA/QC InSPECTIOn
PRE-QUALIFICATIOn
OwnER’S EngInEER
QA/QC InSPECTIOn
OwnER’S EngInEER
QA/QC InSPECTIOn
FInAL ACCEPTAnCE TESTS
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
In-SERVICE InSPECTIOn
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
AUDITIng & CERTIFICATIOn
COMPOnEnT CERTIFICATIOn
ISO 9001
ISO 14001
OhSAS 18001
ISO 50001
IEE CERTIFICATIOn
TRAInIng STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn
4
Solutions for safe, efficient and reliable conventional power plants We provide conventional power plant stakeholders with state-of-the-art consulting, testing, inspection, certification and training services along the whole asset lifecycle. Our experts have acquired in-depth technical knowledge through decades of international experience on public, private and joint-sector projects.
ASSET LIFECYCLE FEASIBILITY & PLAnnIng PROCUREMEnT COnSTRUCTIOn COMMISSIOnIng In-SERVICE REhABILITATIOn &
DECOMMISSIOnIng
COnSULTIng
DUE DILIgEnCE
LICEnSIng COnSEnTIng
TEnDER & COnTRACT MAnAgEMEnT
SITE ASSESSMEnT
DESIgn REVIEw
DESIgn APPROVAL
CLAIM MAnAgEMEnTCLAIM MAnAgEMEnT
DUE DILIgEnCE
PLAnT STATUS ASSESSMEnT
PLAnT OPTIMISATIOn
DUE DILIgEnCE
EnERgY EFFICIEnCY ASSESSMEnT
REhABILITATIOn MAnAgEMEnT
FAILURE AnALYSIS
InSPECTIOn & TESTIng
OwnER’S EngInEER
QA/QC InSPECTIOn
PRE-QUALIFICATIOn
OwnER’S EngInEER
QA/QC InSPECTIOn
OwnER’S EngInEER
QA/QC InSPECTIOn
FInAL ACCEPTAnCE TESTS
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
In-SERVICE InSPECTIOn
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
PERFORMAnCE TESTS
nOISE/VIBRATIOn/EMISSIOnS TESTIng
AUDITIng & CERTIFICATIOn
COMPOnEnT CERTIFICATIOn
ISO 9001
ISO 14001
OhSAS 18001
ISO 50001
IEE CERTIFICATIOn
TRAInIng STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn STAFF TRAInIng/QUALIFICATIOn
5
Our industry accreditations
Management Systems· ISO 9001· ISO 14001· OHSAS 18001· ISO 50001· Etc.
Directives & Codes· ASME· PED· IBR· SELO· GOST· DOSH and other local codes and regulations
· Empaneled as ‘Renovation and Modernisation consultant’ by Central Electricity Authority (CEA) India.
6
Supporting conventional power plants globally Over 800 locations in 40 countries around the world
gLOBAL hEADQUARTERS:MUnICh, gERMAnY
World-class expertise With over 140 years of experience in power plants, we offer solutions that are backed by best practice case scenarios, making us a holistic service provider and project implementation expert. We bring you world-class insights, intelligence and expertise.
Multidisciplinary engineering experienceOur global interdisciplinary team comes from a variety of different engineering specialisations in power station and plant engineering as well as piping and process control engineering.
Independent and impartialTÜV SÜD is internationally recognised as an independent third-party technical service provider. You can be assured of objective and reliable reports on which you can base your decisions.
Industry accreditationsTÜV SÜD is an approved Notified Body 0036 and cooperation partner of an authorised inspection authority. Our testing laboratories are also ISO 17025 accredited. With our support, you can obtain the CE Mark and ASME Code acceptance from a single convenient source.
End-to-end solutionsTÜV SÜD is a one-stop source for power plant solutions. We will work with you at every stage throughout the entire lifecycle of your project, from design and construction through to operation and maintenance.
Global supportWe have a strong international and regional presence in key economic markets, ensuring that you will receive a consistent level of premium TÜV SÜD quality in any region.
why choose us?
7
Your business benefits Increase availability, optimise performance – TÜV SÜD’s experts apply their long-standing experience and holistic approach to help you plan with certainty and obtain professional advice in performance optimisation to reduce outage time and increase your return on investment.
Promote efficiency, reduce emissions – Our experts’ impartial perspective fosters cost efficiency in your organisation, while their comprehensive knowledge contributes to your emissions goals.
Minimise risk, improve reliability – TÜV SÜD helps you to reduce the risk of conventional power plant incidents and enhance safety for people and the environment. We help to increase your process transparency and eliminate interface problems.
Strengthen your competitive edge – Leveraging our expertise in safety and statutory compliance provides legal certainty. Beyond this, third-party certification by TÜV SÜD demonstrates your commitment to quality.
Contact us on 1800-210-1000 to learn more about our conventional power plant [email protected]
2014
© T
ÜV S
ÜD S
outh
Asia
Pvt
. Ltd
. | V
-IM/ P
wS/
12.0
/en/
In
Choose certainty. Add value.TÜV SÜD is a premium quality, safety and sustainability solutions provider that specialises in testing, inspection, auditing, certification, training and knowledge services. Represented in over 800 locations worldwide, we hold accreditations in Europe, the Americas, the Middle East, Asia and Africa. By delivering objective solutions to our customers, we add tangible value to businesses, consumers and the environment.