badu ecomv (2.4 thp) - inyopools.com · ™2.4 thp us motors’ ecotech ez motor. motor has a...
TRANSCRIPT
-
8125 BAYBERRY ROAD, JACKSONVILLE, FLORIDA 32256 USA PHONE 904-739-2626 FAX 904-737-5261WEBSITE: WWW.USA.SPECK-PUMPS.COM 05/2014
BADU® EcoMV PERFORMANCE CURVE
BADU® EcoMV TECHNICAL DATA
MODEL THP VOLTSPIPESIZE
SHIPPINGWEIGHT
Badu EcoMV/72-V 2.4 208-230 3” 55 lbs.
US GALLONS PER MINUTE
TOTA
L H
EA
D IN
FE
ET
50 7010 300 90 130 150110 170
3100 RPM
2400 RPM
1725 RPM
1035 RPM
20
40
60
80
30
50
70
90
10
3450 RPM
0.4"
6.8"
13.5
"
31.5"
9.6"
4.1"
0.4"
8.5"
15.2"
11.0"
12.5
"
10.8"6.7"5.1"
features
BADU® EcoMV (2.4 THP)
Variable Speed Pump
The Speck Badu EcoMV all-plastic, self-priming variable speed pool pump is designed for small commercial and large residential pools and spas. The pump design has been engineered for incredible durability, superior performance, and quiet operation. Speck continues to set standards for the future by using 100% recyclable plastics which benefit the consumer and the environment.
n This high performance, medium head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
n Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
n The pump can be used for pool water with a salt concentration of up to 5000 ppm.
n Suction and Discharge are equipped with 2” quick disconnect unions for easy installation and maintenance. Opitonal 3” available.
n Permanent magnet brushless DC motor 2.4 THP US Motors’ EcoTech EZ™ motor. Motor has a built-in controller and LCD screen.
n RPM levels can be set to range from 1035 to 3450. The levels can be set in percentage of full at 5% increments of flow.
n Programmable high efficiency TEFC (totally enclosed fan cooled) motor 56 frame has the ultimate flexibility in motor speed and timer settings.
n Freeze protection feature will run motor at 30% flow.
n The key pad can be locked for safety.
n Can also be used with most other 3rd party electronic controllers.
n For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts.
n Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place.
n Two year warranty on the motor and all pump parts, including normal wear of the mechanical seal.
n Every pump is performance tested before leaving the Speck factory.
in-groundcommercial
LISTED 31B4
BADU EcoMV/72-V
CONFORMS TO NSF/ANSI STD 50
3166644
-
8125 BAYBERRY ROAD, JACKSONVILLE, FLORIDA 32256 USA PHONE 904-739-2626 FAX 904-737-5261WEBSITE: WWW.USA.SPECK-PUMPS.COM 05/2014
MODEL THP VOLTSPIPESIZE
SHIPPINGWEIGHT
Badu EcoMV/72-VI 3.45 208-230 3” 56 lbs.
BADU® EcoMV PERFORMANCE CURVE
BADU® EcoMV TECHNICAL DATA
US GALLONS PER MINUTE
TO
TA
L H
EA
D IN
FE
ET
60 8020 400
100 140 160120 180
3100 RPM
2400 RPM
1725 RPM
1035 RPM
20
40
60
80
30
50
70
90
100
10
3450 RPM
0.4"
6.8"
13.5
"
31.5"
9.6"
4.1"
0.4"
8.5"
15.2"
11.0"
12.5
"
10.8"6.7"5.1"
BADU EcoMV/72-VIfeatures
Variable Speed Pump
The Speck Badu EcoMV all-plastic, self-priming variable speed pool pump is designed for small commercial and large residential pools and spas. The pump design has been engineered for incredible durability, superior performance, and quiet operation. Speck continues to set standards for the future by using 100% recyclable plastics which benefit the consumer and the environment.
BADU® EcoMV (3.45 THP)
n This high performance, medium head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
n Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
n The pump can be used for pool water with a salt concentration of up to 5000 ppm.
n Suction and discharge are equipped with 3” quick disconnect unions for easy installation and maintenance.
n Permanent magnet brushless DC motor 3.45 THP US Motors’ EcoTech EZ™ motor. Motor has a built-in controller and LCD screen.
n RPM levels can be set to range from 1035 to 3450. The levels can be set in percentage of full at 5% increments of flow.
n Programmable high efficiency TEFC (totally enclosed fan cooled) motor 56 frame has the ultimate flexibility in motor speed and timer settings.
n Freeze protection feature will run motor at 30% flow.
n The key pad can be locked for safety.
n Can also be used with most other 3rd party electronic controllers.
n For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts.
n Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place.
n Two year warranty on the motor and all pump parts, including normal wear of the mechanical seal.
n Every pump is performance tested before leaving the Speck factory.
in-groundcommercial
LISTED 31B4
CONFORMS TO NSF/ANSI STD 50
3166644