DS840

Backstop® NT™ Air/Water- Resistive Barrier Details

Backstop NT Air/Water-Resistive Barrier Details

AWB 0.0.01

SHEATHING JOINT TREATMENT

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

AIR/WATER-RESISTIVE BARRIERThe architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.02

VENEER OVER LATH

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVEBARRIER

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

MINIMUM GRADE D BUILDING PAPER SLIPSHEET (BY OTHERS)

™

AIR/WATER-RESISTIVE BARRIERCEMENT PLASTER / STONE

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

FURRING ATTACHED TO FRAMING(BY OTHERS)

SIDING / BACKER BOARD ATTACHEDTO FURRING (BY OTHERS)

AWB 0.0.03

RAINSCREEN FURRED SIDINGAIR/WATER-RESISTIVE BARRIERThe architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.04

INSIDE CORNERAIR/WATER-RESISTIVE BARRIER

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.05

OUTSIDE CORNERAIR/WATER-RESISTIVE BARRIER

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

OPENING PREPARATION

AWB 0.0.06

STEP #1

STEP #3 STEP #4

STEP #2

DRYVIT BACKSTOP® NTAIR/WATER-RESISTIVEBARRIER

INSTALL DIAGONAL STRIPOF DRYVIT AQUAFLASHAND AQUAFLASH MESHAT CORNERS

INSTALL DRYVITAQUAFLASH SYSTEM(AQUAFLASH & AQUAFLASHMESH) AT HEADS

AIR/WATER-RESISTIVE BARRIER

APPROVED SHEATHING(BY OTHERS)

DRYVIT BACKSTOP NTAIR/WATER-RESISTIVEBARRIER

APPROVED SHEATHING(BY OTHERS)

DRYVIT BACKSTOP NTAIR/WATER-RESISTIVEBARRIER

APPROVED SHEATHING(BY OTHERS)

DRYVIT BACKSTOP NTAIR/WATER-RESISTIVEBARRIER

APPROVED SHEATHING(BY OTHERS)

INSTALL DRYVITAQUAFLASH SYSTEM(AQUAFLASH & AQUAFLASHMESH) AT JAMBS

DRYVIT AQUAFLASH®SYSTEM (AQUAFLASH &AQUAFLASH MESH)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

FRAMING (BY OTHERS)

AWB 0.0.07

SUPPORT TRANSITIONAIR/WATER-RESISTIVE BARRIERFLOOR LINE BRICK SHELF

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

FLASHING EXTENDED TO OUTSIDEFACE OF BRICK (BY OTHERS)

BRICK SUPPORT ANGLE (BY OTHERS)

FLOOR LINE SLIP TRACK (BY OTHERS)

DRYVIT AQUAFLASH SYSTEM

APPROVED SHEATHING (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.08

AIR/WATER-RESISTIVE BARRIER VERTICAL EXPANSION JOINT

APPROVED SHEATHING (BY OTHERS)

BACK TO BACK FRAMING JOINT(BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

RECESSED BACKER ROD (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.09

AIR/WATER-RESISTIVE BARRIER BRICK SHELF DETAIL

FRAMING (BY OTHERS)

FASTENERS SPOTTED WITH BACKSTOP® NTTEXTURE

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

APPROVED SHEATHING (BY OTHERS)

COAT PENETRATIONS WITH DRYVIT AQUAFLASH®LIQUID FLASHING

DRYVIT AQUAFLASH SYSTEM(AQUAFLASH & AQUAFLASH MESH)

METAL FLASHING EXTENDING TO DAYLIGHT(BY OTHERS)

FOUNDATION WALL (BY OTHERS)

FOUNDATION WATER PROOFING (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

FRAMING (BY OTHERS)

AWB 0.0.10

AIR/WATER-RESISTIVE BARRIER TERMINATION AT FOUNDATION

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

APPROVED SHEATHING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

FLASHING (BY OTHERS)

FOUNDATION WATER PROOFING(BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.11

AIR/WATER-RESISTIVE BARRIER SILL DETAIL

FRAMING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

APPROVED SHEATHING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

SEALANT (BY OTHERS)

SILL PAN FLASHING (BY OTHERS)

DRYVIT AQUAFLASH SYSTEM(AQUAFLASH & AQUAFLASH MESH)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

AWB 0.0.12

WINDOW HEAD DETAIL

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

CONTINUOUS HEAD FLASHING (BY OTHERS)

COMPATIBLE SEALANT (BY OTHERS)

DRYVIT AQUAFLASH SYSTEM(AQUAFLASH & AQUAFLASH MESH)CONTINUOUS SEALANT INTERIOR AIR SEAL(BY OTHERS)

WINDOW SYSTEM (BY OTHERS)

AIR/WATER-RESISTIVE BARRIERThe architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.13

FLOOR LINE FLASHINGAIR/WATER-RESISTIVE BARRIER

FRAMING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

APPROVED SHEATHING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

FLASHING (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.14

WALL INTERSECTIONAIR/WATER-RESISTIVE BARRIER PARAPET / VERTICAL

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.15

AIR/WATER-RESISTIVE BARRIERTERMINATION AT

WATERPROOF DECK

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

COMPATIBLE WATERPROOF DECK COATING(BY OTHERS)

CONCRETE DECK (BY OTHERS)

COMPATIBLE SEALANT AND BACKER ROD(BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.16

AIR/WATER-RESISTIVE BARRIER BRICK CONNECTOR TREATMENT

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

BRICK TIE (BY OTHERS)

DRYVIT AQUAFLASH® LIQUID FLASHING

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH LIQUID FLASHINGOR FLASHING TAPE

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.17

AIR/WATER-RESISTIVE BARRIER CLADDING TRANSITION (A)

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

CONTINUOUS FLASHING (BY OTHERS)

CONTINUOUS SEALANT (BY OTHERS)

SIDING (BY OTHERS)

EIFS CLADDING

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.18

AIR/WATER-RESISTIVE BARRIER CLADDING TRANSITION (B)

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

™

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

CONTINUOUS FLASHING (BY OTHERS)

CONTINUOUS SEALANT (BY OTHERS)

MINIMUM GRADE D PAPER SLIP SHEETOR EQUIVALENT (BY OTHERS)

CEMENT PLASTER OVER LATH(BY OTHERS)

ADHERED STONE OR BRICK OVER CEMENT PLASTER(BY OTHERS)

EIFS CLADDING

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.19

DRYVIT GRID TAPE COVERED WITHBACKSTOP® NT TEXTURE

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP NT AIR/WATER-RESISTIVE BARRIER

TRANSITION AT FOUNDATION WALL

FRAMING (BY OTHERS)

BASE FLASHING (BY OTHERS)

FOUNDATION WATER PROOFING ORDAMP PROOFING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

™

AIR/WATER-RESISTIVE BARRIER

SIDING (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.20

AIR/WATER-RESISTIVE BARRIER ROOF VERTICAL WALL TRANSITION

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

ROOFING FELT EXTENDED ONTO WALL(BY OTHERS)

ROOF STEP FLASHING (BY OTHERS)

ROOF DIVERTER FLASHING (BY OTHERS)

GUTTER (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.21

AIR/WATER-RESISTIVE BARRIER ROOF SCUPPER

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

SEALED METAL SCUPPER (BY OTHERS)

ROOFING MEMBRANE SEALED TO SCUPPER(BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.22

AIR/WATER-RESISTIVE BARRIER PENETRATIONS

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVE BARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

APPROVED SEALANT (BY OTHERS)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016

AWB 0.0.23

AIR/WATER-RESISTIVE BARRIER PARAPET / EDGETRANSITION AT ROOF

PARAPET BLOCKING (BY OTHERS)

LAP ROOFING MEMBRANE/AIR BARRIERONTO AQUAFLASH AND SEAL (BY OTHERS)ROOF PARAPET/EDGE CAP (BY OTHERS)CONTINUOUS RETAINING CLEAT (BY OTHERS)

CONTINUOUS SEALANT (BY OTHERS)

FRAMING (BY OTHERS)

APPROVED SHEATHING (BY OTHERS)

DRYVIT BACKSTOP® NT AIR/WATER-RESISTIVEBARRIER

DRYVIT AQUAFLASH® SYSTEM(AQUAFLASH & AQUAFLASH MESH)

The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.

©Dryvit Systems, Inc.Issued: 10/2016