backsaver crane catalogue product catalogue€¦ · backsaver crane catalogue f12643 300kg the...

Product Catalogue

Winches are not intended for the movement of people

Backsaver Crane – Mark II with Extendable Boom (300kg & 500kg)

Backsaver Crane Catalogue

(P) 1300 65 00 35 | (F) 1800 68 68 96 | [email protected] | www.materialshandling.com.au


Winches are not intended for the movement of peopleWinches are not intended for the movement of people

Backsaver Cranes Save Your Back...Save Your Money

Backsaver Crane – Mark II with Extendable Boom (300kg & 500kg)

300kg and 500kg Capacity Lift

The lifting capabilities of the Backsaver Crane are supplied by a 300kg and 500kg manual brake

winch. To raise the load simply wind the handle, to lower the load wind the handle in the reverse

direction. The winch incorporates a load friction brake which is automatically activated when the

handle is released – keeping the load safely in position at all times.

There is an easier way

Don’t take the risk to your back, equipment or business. If it’s got to be lifted, do it the easy way,

F19001 500kg

F19001CW 500kgPowder coated white

Now available with 12 volt and 24 volt DC Electric Winches

Various coatings available - see page 6

www.materialshandling.com.au

with a Backsaver Crane. The Backsaver Crane has the capacity to safely, simply and effectively

lift and place loads of up to 300kg and 500kg.

The Backsaver Crane is the economical alternative to expensive vehicle mounted hydraulic cranes

and is suitable for utilities, trucks and trailers, etc. The Crane is also suitable for industrial, marine

and rural applications.

Standard colours, Galvanised or Powder Coated White.

Email: [email protected] | Web: www.advansa.com.au




F12643 300kg

The Backsaver Crane


The Backsaver Crane provides the perfect lifting solution to tradesmen,

farmers, delivery drivers and anyone who has to lift loads of anything

from fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-

mowers, cement mixers, farm machinery, livestock, fence, brick cutters

and even tractor tyres – the possibilities are endless. In fact if you have

ever thought, “There’s got to be a better way”, chances are that we've

has already found it.



DO the following:

• Do not lift people, or objects over people. Do not walk or work under a load or in the line of force of any load.

• Do not exceed the load rating of the winch or any other component in the system. To do so could result in failure of the equipment.

• Do not use more than one winch to move a load that exceeds the load rating of a single winch. A shift in load weight could overload the equipment.

• Do not use damaged or malfunctioning equipment. To do so could result in failure of the equipment.

• Do not modify the equipment in any way. To do so could cause equipment failure.

• Do not apply a load on the winch with the wire cable fully extended. Keep at least three full turns of cable / fi bre rope on the drum.

• Do not wrap the wire cable / fi bre rope around the load. This may damage the wire cable / fi bre rope and could cause the load to slip / fall. Use a sling or other

approved lifting device.

• Do not operate the winch with covers / guards removed or improperly installed.

• Do not divert your attention from the operation. Stay alert to the possibility of accidents, and try to prevent them from happening.

• Do not jerk or swing the load. Avoid shock loads by starting and stopping the load smoothly. Shock loads overload the equipment and may cause damage.

• Do not leave a suspended load unattended unless specifi c precautions have been undertaken and keep people away from the winch and out from under the load.

DO NOT do the following:

Important Safety Information

Read carefully and comply with the guidelines set forth in the Owner’s Manual.

Keep hands away from the drum, gears, wire cable / fi bre rope, and other moving parts of the equipment.

Install the wire cable / fi bre rope securely to the winch drum.

Ensure at least 3 turns of wire cable / fi bre rope wound on the drum at all times, to serve as an anchor wrap.

Keep all unnecessary personnel away from the winch while in operation.

Keep out of the path of the load should the wire cable / fi bre rope break and snap back and cause injury.






Backsaver Cranes: - Options available

Backsaver Crane – Mark II with Extendable Boom (300kg) with F18230/5 Brake Winch

F12643 – Backsaver Crane 300kg with Cable

F12643R – Backsaver Crane 300kg with Rope

F12643G – Galvanised Backsaver Crane 300kg with Cable

F12643GR – Galvanised Backsaver Crane 300kg with Rope

F12696E12 – Backsaver Crane 300kg with Electric Winch - Superwinch S4000 12V


F13643W – Powder coated white Backsaver Crane 300kg with Cable

F13643WR – Powder coated white Backsaver Crane 300kg with Rope

Backsaver Crane – Mark II with Extendable Boom (300kg) with F18260/5 Brake Winch

F19001 – Backsaver Crane 500kg with Cable

F19001R – Backsaver Crane 500kg with Rope



F19001CW – Powder coated white Backsaver Crane 500kg with Cable

F19001CWR – Powder coated white Backsaver Crane 500kg with Rope

Industrial Catalogue



Backsaver Crane – Mark II with Extendable Boom (300kg) with F18230 Brake Winch

F12643 – Backsaver Crane 300kg with Cable F12643R – Backsaver Crane 300kg with Rope F12643G – Galvanised Backsaver Crane 300kg with Cable F12643GR – Galvanised Backsaver Crane 300kg with Rope F12696E12 – Backsaver Crane 300kg with Electric Winch - Superwinch S4000 12V F12696E24 – Backsaver Crane 300kg with Electric Winch - Superwinch S4000 24V F13643W – Powder coated white Backsaver Crane 300kg with Cable F13643WR – Powder coated white Backsaver Crane 300kg with Rope


F19001 – Backsaver Crane 500kg with Cable F19001R – Backsaver Crane 500kg with Rope F19001E12 – Backsaver Crane 500kg with Electric Winch - Superwinch S5000 12V F19001E24 – Backsaver Crane 500kg with Electric Winch - Superwinch S5000 24V F19001CW – Powder coated white Backsaver Crane 500kg with Cable F19001CWR – Powder coated white Backsaver Crane 500kg with Rope

F12643 Backsaver Crane mounted on Holden Utility vehicle

F12643W Backsaver Crane mounted on wharf




Advansa Pty Ltd 184 Cormack Road, Wingfield SA 5013 Page 22 (T) +61 (0)8 8243 9100 (F) +61 (0)8 8243 9185 Email: [email protected] Revision 8 (7/07) Web: www.advansa.com.au Toll Free: 1300 135 935

advansa



F12643 – Backsaver Crane 300kg with Cable F12643R – Backsaver Crane 300kg with Rope F12643G – Galvanised Backsaver Crane 300kg with Cable F12643GR – Galvanised Backsaver Crane 300kg with Rope F12696E12 – Backsaver Crane 300kg with Electric Winch - Superwinch S4000 12V F12696E24 – Backsaver Crane 300kg with Electric Winch - Superwinch S4000 24V F13643W – Powder coated white Backsaver Crane 300kg with Cable F13643WR – Powder coated white Backsaver Crane 300kg with Rope


F19001 – Backsaver Crane 500kg with Cable F19001R – Backsaver Crane 500kg with Rope F19001E12 – Backsaver Crane 500kg with Electric Winch - Superwinch S5000 12V F19001E24 – Backsaver Crane 500kg with Electric Winch - Superwinch S5000 24V F19001CW – Powder coated white Backsaver Crane 500kg with Cable F19001CWR – Powder coated white Backsaver Crane 500kg with Rope


F12643W Backsaver Crane mounted on wharfF13643W Backsaver Crane mounted on wharf




Backsaver Crane – Mark II with Extendable Boom (300kg) Industrial Catalogue


Advansa Pty Ltd 184 Cormack Road, Wingfield SA 5013 Page 23 (T) +61 (0)8 8243 9100 (F) +61 (0)8 8243 9185 Email: [email protected] Revision 8 (7/07) Web: www.advansa.com.au Toll Free: 1300 135 935

advansa

Backsaver Crane – Mark II with Extendable Boom (300kg)

The Jarrett Backsaver Crane is fitted with 3600

mechanical slewing by means of a worm drive gear. This eliminates the danger of the crane boom swinging out of control when the load is taken up. The boom can only be rotated (slewed) by operating the slewing control handle. This important safety feature keeps the load under control at all times – essential for one person operation.

With a choice of two models, the Backsaver Crane suits a host of reach and lift requirements. With an extendable position action, all cranes have a boom reach of over 1 metre at their 300kg and 500kg lift positions. Both models have a choice of boom angle settings for even greater adaptability.

If it’s got to be lifted, do it the easy way, with a Jarrett Backsaver Crane.

Models (refer to page 21 for complete listing):

F12643 – Backsaver Crane 300kg F12643G – Galvanised F12696Exx – Electric Winch - Superwinch S4000 F13643W – Powder coated white

Options – not applicable to F12696Exx

R- denotes fibre rope instead of wire cable (Backsaver cranes only)

Contact Customer Service for sales and availability

With a choice of two models, the Backsaver Crane suits a host of reach

and lift requirements. With an extendable position action, all cranes have

a boom reach of over 1 metre at their 300kg and 500kg lift positions. Both

models have a choice of boom angle settings for even greater adaptability.


F12643 – Backsaver Crane 300kg

F12643G – Galvanised

F12696Exx – Electric Winch - Superwinch S4000

F13643W – Powder coated white


R- denotes fi bre rope instead of wire cable (Backsaver cranes only)


Max extended height = 1960(vertical) 1526(horizontal) at 200kg S.W.L

Min extended height = 1460(v) 1770(h) at 150kg S.W.L

Max retracted height = 1687(v) 1126(h) at 300kg S.W.L

Min retracted height = 1300(v) 1330(h) at 250kg S.W.L


a worm drive gear. This eliminates the danger of the crane boom swinging

out of control when the load is taken up. The boom can only be rotated

(slewed) by operating the slewing control handle. This important safety

feature keeps the load under control at all times – essential for one person

operation.

The Backsaver Crane is fitted with 3600 mechanical slewing by means of

If it’s got to be lifted, do it the easy way, with a Backsaver Crane.







advansa

Spare parts listing for Backsaver Crane – 300kg

Exploded view of the F12643 (300kg) Backsaver Crane





advansa







The simple design of the Backsaver Crane means it is easy to assemble and

can be fi tted almost anywhere – to jetties, utes or tray tops and to a wide

variety of fi


F19001 – Backsaver Crane 500kg

F19001Exx – Electric Winch - Superwinch S5000

F19001CW – Powder coated white


R- denotes fi bre rope instead of wire cable (Backsaver cranes only)


Max extended height = 1950(vertical) 1450(horizontal) at 350kg S.W.L

Min extended height = 1530(v) 1700(h) at 280kg S.W.L

Max retracted height = 1640(v) 1060(h) at 500kg S.W.L

Min retracted height = 1330(v) 1270(h) at 400kg S.W.L

Vertical storage (only) height = 2300





F19001 – Backsaver Crane 500kg F19001Exx – Electric Winch - Superwinch S5000 F19001CW – Powder coated white


R- denotes fibre rope instead of wire cable (Backsaver cranes only)



xed platforms. When a Backsaver Crane is vehicle mounted and

the time comes to change vehicles, it is simple to remove and leaves only

four holes. The Backsaver Crane is then ready to install elsewhere. The

Backsaver Crane’s simple operation means that little can go wrong and

service support is available through Spare parts distributors around

Australia.

The Backsaver Crane provides the perfect lifting solution to tradesmen,

farmers, delivery drivers and anyone who has to lift loads of anything from

fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-mowers,

cement mixers, farm machinery, livestock, fence, brick cutters and even

tractor tyres – the possibilities are endless.









advansa





advansa






Backsaver Crane Assembly and Operating Instructions

1. Ensure the unit is correctly anchored via the base-plate to the operating platform.

2. Attach the boom to the post with the pivot pin and support pin.

3. Ensure the spring clips are fi tted to the pivot pin and to the support pin.

4. Bolt the winch to the boom using 4ea M10 bolts, nuts and washers.

5. Thread the winch cable and hook it through the slot at the front of the boom.

6. Attach the pulley to the boom with the pulley pin and spring clips.

Please note: The Post and Base of the 500kg Backsaver Crane cannot be separated for installation.

Operation

1. Ensure that the operating platform is steady. If the unit is vehicle mounted then it should be positioned on a stable and horizontal surface with neutral or park gear selected

and hand brake activated.

2. Release the hook from the base of the crane.

3. Rotate the boom by turning the slewing handle until the hook is positioned directly over the load. (NEVER ATTEMPT TO LIFT THE LOAD WITHOUT THE BOOM BEING

POSITIONED DIRECTLY OVER THE LOAD)

4. Attach the hook securely to the load.

5. Standing clear of the load, raise the load by turning the winch handle clockwise.

6. When the load is at the desired height, slew the load to the required position.

7. Lower the load by turning the winch handle anticlockwise.

8. If the load has been lowered onto a vehicle tray then the load should be secured. (DO NOT TRAVEL WITH LOAD ATTACHED TO THE CRANE)

9. Secure the hook into one of the four braces and take up the slack in the cable to secure the boom.

Maintenance

1. Clean and lubricate the following as required with appropriate grease:

• Winch gears and pinion threads • Pivot pin

• Slewing worm and handle • Winch cable

• All bushes • Base tube

2. Inspect the gears, bushes and cable monthly for wear and replace as required.

Backsaver Cranes – Bolt-down plate specs. Miscellaneous Notes:

underside of the safety hook (with the

When not in use – secure the hook in one of the four braces.

500kg Backsaver Crane: Crane Post and Base cannot be separated for installation.

Miscellaneous Notes:

Vertical distance from top of U-plate to the underside of the safety hook

(with the ferrule against the pulley) = 240mm

300kg - 500kg Backsaver Crane:

When not in use – secure the hook in one of the four braces.

500kg Backsaver Crane:

Crane Post and Base cannot be separated for installation.

Backsaver Cranes – Component weights (approx)

Winch – 7kg Post and Base section – 55kg

Inner and Outer Boom – 26kg Boom Support Bar (F19001 – 500kg series) – 3 kg

Packed in cartons – pack of 2 Carton Dimensions: 172cm x 48cm x 62cm

300KG AND 500KG EXTENDABLE BOOM CRANE BOLTDOWN SPECS






Vehicle installation of Backsaver Crane (300kg and 500kg)

To provide a minimum safety factor at the crane’s maximum capacity (jib in short position), the general mounting arrangement (expected to provide good long term service)

should consist of the following additional equipment and conditions:

1. 2 ea. 100mm x 10mm x 450mm long steel plates drilled appropriately to suit crane base plate bolt pattern (see previous page).

2. 4 ea.M16 HH 8.8 bolts with ferrule spacers on each bolt to take up the bolt shank to mounting hole clearance with M16 nylocs.

3. Large above fl oor washers (M16) are used under the bolt heads.

4. The under fl oor plates must sit fl at against the underside surface.

Due to the nature of mounting through corrugated fl oor structure it is recommended that regular inspection is undertaken to ensure that the mounting stay secure and no

cracking of the fl oor become evident.



advansa

Vehicle installation of Backsaver Crane (300kg and 500kg)

To provide a minimum safety factor at the crane’s maximum capacity (jib in short position), the general mounting arrangement (expected to provide good long term service) should consist of the following additional equipment and conditions:

1. 2 ea. 100mm x 10mm x 450mm long steel plates drilled appropriately to suit crane base plate bolt pattern (see previous page). 2. 4 ea. M16 HH 8.8 bolts with ferrule spacers on each bolt to take up the bolt shank to mounting hole clearance with M16 nylocs. 3. Large above floor washers (M16) are used under the bolt heads. 4. The under floor plates must sit flat against the underside surface.

The Jarrett Backsaver Crane has a large mounting base that sits flat on the vehicle floor and is anchored to the floor with 10mm flat under floor plates. Each plate is mounted transversely across the full width of the main crane base (above the floor) and is not less than 100mm wide.

Due to the nature of mounting through corrugated floor structure it is recommended that regular inspection is undertaken to ensurethat the mounting stay secure and no cracking of the floor become evident.

Mountings on vehicle tray top (L) & underside (Above)

Mountings on vehicle tray top (L) & underside (Above)


The Backsaver Crane has a large mounting base that sits fl at on the vehicle fl oor and is anchored to the fl oor with 10mm fl at under fl oor plates. Each plate is mounted

transversely across the full width of the main crane base (above the fl oor) and is not less than 100mm wide.

backsaver crane catalogue product catalogue€¦ · backsaver crane catalogue f12643 300kg the...

Documents