CRITICAL DIMENSIONS(DO NOT SCALE)

DESCRIPTION• Various finishes identified by suffix • Handheld shower • 69" double interlock spiral hose (metal)• Double check valve in handle• 30" slide bar with push button height selection OPERATION• Single function• Handshower holder rotates to adjust angle of handshower FLOW• EP17 suffix models designed to deliver 1.75 gpm (6.7 L/min) max• EP suffix models designted to deliver 2.0 gpm (7/6 L/min) max at 80 psiSTANDARDS• Designed and manufactured to meet: ASME A112.18.1/CSA B-125.1,

ASSE 1014 and all applicable specifications referenced therein WARRANTY• Limited lifetime warranty against material or manufacturing defects

90 DEGREE™Single Function Handshower

w/Slide Bar

Model: S3879EP series

FINISHED WALL LINE

Drop ell soldseparately

3-1/8”

(80mm)

5/8”

(15mm)

8-3/4”(223mm)

30-5/8”(778mm)

Hole Size5/8” (17mm)

2”(50mm)

1-5/8”(40mm)

2-1/8”(54mm)

�� � �� �� � �� � �B � � � A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.comRev. 7/14

CRITICAL DIMENSIONS(DO NOT SCALE)

TS2713sp: Rev. 5/13

THIN WALL APPLICATIONTHICK WALL APPLICATION

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

2" CC (51mm) 1-7/8" IPS (48mm)

MAX WALL

HOTINLET

COLDINLET

FINISHED WALL LINE

FACE OF STUD

4-1/2" (114mm)WALL OPENING

FLOOR

45" (1143mm)/48" (1219mm)-SHOWER

32" (813mm)-TUB ORTUB SHOWER

7-1/2" (191mm)

MIN

TUB RIM

6'-6" (1981mm)

L C

1-3/8" (35mm)

2-1/2" MAX. (63mm)

1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm)

FLOOR LINE

1-3/8"(35mm)

1-1/2" (38mm)

3/16" (typ) (5mm)

PLASTER GROUND 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN.

DIAMETER WALL

OPENING

PLASTIC TUB/SHOWER

SURROUND

L C

6-3/16”(157mm) 2-1/2”

(64mm)

6-7/16”(164mm)

2-7/16”(62mm)

7-1/4”(185mm)

8-3/8”(213mm)

FAUCET DESCRIPTION• Metal construction with various finishes identified by suffix • Includes showerhead, arm, flange and diverter spoutOPERATION• Lever style handle with temperature indicator on the escutcheon• Handle operates counterclockwise through a 270˚ arc with off at

6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction

• Adjustable temperature limit stop to control maximum hot watertemperature

• Pressure balancing mechanism maintains selected discharge temperature to ± 3.6° F (±2˚ C)

FLOW• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi • EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi • NH suffix models contain no showerhead CARTRIDGE• 1222 cartridge design• Nonmetallic/nonferrous and stainless steel materials• Accommodates back to back installationsSTANDARDS• Third party certified to meet ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein • EP suffix models are third party certified to WaterSense®

• ADA for lever handle

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser• 5 year warranty if used in commercial installations

90 DEGREE ™ POSI-TEMP®

Single-Handle Tub/Shower Trim Kit

Model: TS2711 series - valve trim only

TS2712 series - shower trim only

TS2713 series - tub/shower trim only

Valves: 62300, 2500 series

� � � �� �� � �� � �B � � � A

EP Suffix

Models Only

Specifications

DESCRIPTION• Brass construction• 1/2" CC, IPS, or PEX connections with 1/4 turn stops

• Pressure balancing, four port, cycle valve

OPERATION• Adjustable temperature limit stop to control maximum hot

water temperature• Pressure balancing mechanism maintain selected discharge

temperature to ± 3°F

CARTRIDGE• 1222 cartridge design• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS• Third party certiied to meet CSA B125.1, ASME A112.18.1,

ASSE 1016, and all applicable requirements referenced therein • Moen’s Posi-Temp® and Moentrol® valves with graphite

composite spools combined with Moen’s Eco-performance showerheads meet the performance requirements of pressure and temperature variation of ASSE1016 when

tested as low as 1.5 gpm

WARRANTY• Lifetime limited warranty against leaks, drips and inish defects

to the original consumer purchaser• 5 year warranty if used in commercial installations

POSI-TEMP® VALVE

Pressure-Balancing Valve with

1/4 Turn Stops

Single Pack

Models: 2570 (CC), 2590 (IPS), 2580 (PEX)

Bulk Packed

Models: 62370 (CC), 62390 (IPS)

(Bulk packed 12 per carton)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS(DO NOT SCALE)

TUB

SHOWER

FLOOR

1/2" CC SUPPLY

2-5/16" (59mm) C.C.

4-1/2" (114mm) PLASTERGROUND SIZE AND

WALL OPENING

2" CC (51mm)1 7/8" IPS (48mm)

MAX WALL

FINISHED WALL LINE

FACE OF STUD

32" (813mm) - TUB OR TUB SHOWER

45" (1143mm)/48" (1219mm) - SHOWER

2-7/8" MAX. (73mm)

7/8" MIN. CC & IPS (22mm)

1" (25mm)

FLOOR LINE

1"(25mm)

LC

2-1/8" (54mm)

3/16" (typ) (5mm)

PLASTER GROUND3-1/2" (89mm) MAX.2-1/4" (57mm) MIN.

PLASTICTUB/SHOWER

SURROUND

DIAMETERWALL

OPENING

Rev. 7/16

FINISHED WALL LINE

4"(102mm)

CRITICAL DIMENSIONS(DO NOT SCALE)

������������B���A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

3-Function Transfer Valve Trim Kit

Models: TS4172 series

Valve: 3372

Rev. 12/11

DESCRIPTION

• Metal construction with various finishes identified by suffixOPERATION

• Rotational control with 180˚ of rotation with stopsSTANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein

• for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

ADA

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DROP ELL

Models: A721 series

DESCRIPTION

• Metal construction with various finishes identified by suffix WARRANTY

• Lifetime warranty against material or manufacturing defects

1.85”

(47mm)

3/8”

(10mm)

Finished

Wall Surface

Side ViewBack View

1/2-14 NPT

1/2-14

NPSM Thread

1" (25mm) MinimumDiameter Hole

Pipe (Not Included)

2/12

CRITICAL DIMENSIONS(DO NOT SCALE)

������������B���A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DESCRIPTION

• Two function transfer valve - 2 discrete outputsOPERATION

• 180˚ rotational controlCARTRIDGE

• 162154 cartridgeSTANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks and drips to the original consumer purchaser

• 5 year warranty if used in commercial installations2-Function Transfer Valve

Model: 3375

FINISHED WALL LINE

2" Max Wall(51mm)

Floor

PlasterGround

3/16" "Typ"(5mm)

2-3/8"(60mm)

2-1/8"(54mm)

WALL OPENING

PlasterGround

PlasticTub/Shower

Surround

Face ofStud

1/2" MIN. CC (13mm)

2-1/2"(63mm)

WALL OPENING

THIN WALL APPLICATIONTHICK WALL APPLICATION

Rev. 2/12