DEHRADUN INSTITUTE OF TECHNOIOGY, DehradunLABORATORY MANUAL

PRACTICAL INSTRUCTION SHEET

EXPERIMENT TITLE. : W.A.P to find axial load and deflection in spring in c programming

EXPERIMENT No : 04ISSUE NO.:ISSUE DATE:

REV No.: REV. DATE:Page : 1/2

DEPTT. Mechanical Engg. LABORATORY: CAD LABSEMESTER : VIth

# include# define PI=3.14Main( ){Float d, OD, D, C, K, FS, G, X;Printf( Enter the value of wire diameter(mm):);Scanf(%f, &d);Printf(Enter the value of outer diameter of spring(mm):);Scanf(%d, &OD);D= OD-d;C=D/d;K=(4C-1)/(4C-4) + (0.615/C);Printf(Enter the value of allowable shear stress (N/MM^2):);Scanf(%f,&fs);F= (PI*FS*d*d*d)/ (K*8*D);Printf(Enter the value of modulus of rigidity (N/MM^2):);Prepared by: Mr shwetabh singhApproved by: DR Y.K.Tyagi

DEHRADUN INSTITUTE OF TECHNOIOGY, DehradunLABORATORY MANUAL

PRACTICAL INSTRUCTION SHEET

EXPERIMENT TITLE. : W.A.P to find axial load and deflection in spring in c programming

EXPERIMENT No : 04ISSUE NO.:ISSUE DATE:

REV No.: REV. DATE:Page : 2/2

DEPTT. Mechanical Engg. LABORATORY: CAD LABSEMESTER : VIth

Scanf(%f, &G);X= (PI*F*D*D*D*N)/ (G*d*d*d*d);Printf(The active axial load (N)=%f, F);Printf( Deflection in the spring (mm) =%f, x);}

Prepared by: Mr shwetabh singhApproved by: DR Y.K.Tyagi

1