AXAUNO WALL HUNG PAN

SPECIFICATIONSRecommended use Domestic, hotel and commercial

Colour availability White

Rim configuration Box Rim

Bowl configuration P Trap only

Set out 240mm

Pan fixing Bolted to wall

Seat Matching top fix Soft Close Quick Release seat supplied with suite

Material Vitreous china

Weight Pan: 24kg

Standards AS 1172.1

WELS 4 Star

Flushing 4.5/3 litre dual flush

Warranty 15 years (refer to warranty)

CLEANING RECOMMENDATIONSWe recommend the use of soapy water or approved bathroom cleaners.

This bathroom product should not be cleaned with abrasive materials.

Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions..

To see the complete AXA range go to www.reece.com.au/bathrooms

510

360

400 435

180

435

340 375 240

page 1 of 2

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

Tech Page Version 5

WMKA21243

The more stars the more water efficient

WATER RATINGwww.waterrating.gov.au

In accordance with AS/NZS 6400

Licence No. 0437AXA ONE SrL

4.5 L per full flush / 3 L per half flush

3.3 litres average flush

AXAUNO WALL HUNG PAN

INSTALLATION INSTRUCTIONS

Note

In all circumstances the wall onto which the pan is mounted shall be capable of supporting the pan and load without deflection. All measurements for roughing in should be taken from finished wall/floor. Cistern/wall mounting brackets are not supplied, but fixing kit is. Dimensions shown are nominal measurements only.

1. Screw the fixing bolts onto the protruding all threadensuring that the cut out is pointing outward (fig 1). Protruding all thread will need to be cut to size based on the wall thickness.

2. Insert fixing plugs into the pan wall fixing holes. Carefully install pan onto brackets and fix into position with allen key provided (fig 2).

3. Ensure pan is level before fully tightening. Grubscrew with allen key supplied (fig 3).

AXA - UNO WALL HUNG PAN

Dear Plumber

Could you please ensure a copy of the installation instructions is left with the end user for future reference.

WARRANTY & CARE DETAILS

a. Screw the fixing bolts onto the protruding all thread ensuring that the cut out is point-ing outward (fig 1). Protruding all thread will need to be cut to size based on the wall thickness.

b. Insert the black fixing plugs into the pan wall fixing holes. Carefully install pan onto brackets and fix into position with allen key provided (fig 2).

c. Ensure pan is level before fully tightening. Grub screw with allen key supplied (fig 3).

d. Flush test and check for leaks. Joint seal pan to wall using silicone.

e. Fit decorative caps.

Fig 1 Fig 2

Fig 3

Please note: Cistern/Wall mounting brackets are not supplied, but fixing kit is

4. Flush test and check for leaks. Joint seal pan to wallusing silicone.

5. Fit decorative caps.

Installation of Toilet Seat and Cleaning (separate instructions enclosed)

It is recommended that toilet seat and cover be installed after all trades are finished. The high quality vitreous china finish on this sanitary ware can be maintained by simply using mild soapy water and wiping over. No abrasive cleaners or chemicals should be used on vitreous china surface or toilet seats as this may lead to surface damage.

Do not use any toilet cleaners in the cistern. As the chemical compound may effect the internal mechanisms.

page 2 of 2

Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference