awwa standards april 2016

8/17/2019 Awwa Standards April 2016

1/6

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016

AWW A

STANDARDS

DESIGNATION NAME NO. MEMBER LIST

SOURCE

Groundwater and Wells

A100-15 Water Wells 41100-2015 $79 $109

Set of Well Standards A100, C654, E102, E103 plus Manual M21 Groundwater SAVE 25% WELLS $253 $400

TREATMENT

Filtration

B100-16 Granular Filter Material 42100-2016 $48 $79

B101-12 Precoat Filter Media 42101 $43 $71

B102-15 Manganese Greensand for Filters 42102-2015 $43 $71

B110-09 Membrane Systems 42110 $49 $81

B112-15 Microfiltration and Ultrafiltration Membrane Systems 42112-2015 $58 $92

B114-16 Reverse Osmosis and Nanofiltration Systems for Water Treatment 42114-2016 $48 $79

B116-15 Electrodialysis and Ion-Exchange Membrane Systems 42116-2015 $48 $79

B130-13 Membrane Bioreactor Systems 42130 $49 $81

Softening

B200-12 Sodium Chloride 42200 $43 $71

B201-13 Soda Ash 42201-2013 $43 $71

B202-13 Quicklime and Hydrated Lime 42202-2013 $43 $71

Disinfection Chemicals

B300-10 Hypochlorites 42300 $43 $71

B301-10 Liquid Chlorine 42301 $43 $71

B302-10 Ammonium Sulfate 42302 $43 $71

B303-10 Sodium Chlorite 42303 $43 $71

B304-13 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems 42304-2013 $43 $71B305-15 Anhydrous Ammonia 42305-2015 $49 $81

B306-15 Aqua Ammonia (Liquid Ammonium Hydroxide) 42306-2015 $42 $68

Coagulation

B402-12 Ferrous Sulfate 42402 $43 $71

B403-09 Aluminum Sulfate—Liquid, Ground, or Lump 42403 $43 $71

B404-14 Liquid Sodium Silicate 42404-2014 $43 $71

B405-06 Sodium Aluminate 42405 $43 $71

B406-14 Ferric Sulfate 42406-2014 $43 $71

B407-12 Liquid Ferric Chloride 42407 $43 $71

B408-10 Liquid Polyaluminum Chloride 42408 $43 $71

B451-10 Poly (Diallyldimethylammonium Chloride) 42451 $43 $71

B452-14 EPI-DMA Polyamines 42452-2014 $43 $71

B453-13 Polyacrylamide 42453-2013 $43 $71

Scale and Corrosion Control

B501-13 Sodium Hydroxide (Caustic Soda) 42501-2013 $43 $71

B502-11 Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) 42502 $43 $71

B503-11 Sodium Tripolyphosphate 42503 $43 $71

B504-12 Monosodium Phosphate, Anhydrous and Liquid 42504-12 $43 $71

B505-12 Disodium Phosphate, Anhydrous 42505-12 $43 $71

B506-13 Zinc Orthophosphate 42506-13 $43 $71

Bold indicates Standard is new, revised, or reaffirme


2/6

AWWA STANDARDS

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016


TREATMENT

Scale and Corrosion Control (continued)

B510-12 Carbon Dioxide 42510 $43 $71

B511-10 Potassium Hydroxide 42511 $43 $71

B512-15 Sulfur Dioxide 42512 $43 $71

B550-10 Calcium Chloride 42550 $43 $71

Taste and Odor Control

B600-16 Powdered Activated Carbon 42600-2016 $43 $71

B601-11 Sodium Metabisulfite 42601 $43 $71

B602-08 Copper Sulfate 42602 $43 $71

B603-16 Permanganates 42603-2016 $43 $71

B604-12 Granular Activated Carbon 42604 $60 $95

B605-13 Reactivation of Granular Activated Carbon 42605-2013 $43 $71

Fluorides

B701-11 Sodium Fluoride 42701 $43 $71

B702-11 Sodium Fluorosilicate 42702 $43 $71B703-11 Fluorosilicic Acid 42703 $43 $71

PIPE AND ACCESSORIES

Ductile-Iron Pipe and Fittings

C104-13 Cement–Mortar Lining for Ductile-Iron Pipe and Fittings 43104-2013 $49 $81

C105-10 Polyethylene Encasement for Ductile-Iron Pipe Systems 43105 $49 $81

C110-12 Ductile-Iron and Gray-Iron Fittings 43110 $79 $109

C111-12 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings 43111-12 $49 $81

C115-11 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges 43115 $49 $81

C116-15 Protective Fusion-Bonded Coatings for the Interior and Exterior Surfaces of Ductile-Ironand Gray-Iron Fittings

43116-2015 $48 $79

C150-14 Thickness Design of Ductile-Iron Pipe 43150-2014 $49 $81

C151-09 Ductile-Iron Pipe, Centrifugally Cast 43151 $49 $81

C153-11 Ductile-Iron Compact Fittings 43153 $49 $81

Set of Ductile-Iron Pipe Standards C104, C105, C110, C111, C115, C116, C150, C151, C153, C600, C606, plus Manual M41Ductile-Iron Pipe and Fittings. SAVE OVER 22%

DUCTILE $506 $788

Steel Pipe

C200-12 Steel Water Pipe, 6 In. (150 mm) and Larger 43200-2012 $60 $95

C203-15 Coal-Tar Protective Coatings and Linings for Steel Water Pipe 43203-2015 $49 $81

C205-12 Cement–Mortar Protective Lining and Coating for Steel Water Pipe—4 In. (100 mm)and Larger—Shop Applied

43205 $60 $95

C206-11 Field Welding of Steel Water Pipe 43206 $60 $95

C207-13 Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600mm)

43207-2013 $60 $95

C208-12 Dimensions for Fabricated Steel Water Pipe Fittings 43208-12 $60 $95

C209-13 Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings forSteel Water Pipelines

43209-2013 $49 $81

C210-15 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings 43210-2015 $60 $95

C213-15 Fusion-Bonded Epoxy Coatings for and Linings for Steel Water Pipe and Fittings 43213-2015 $49 $81

C214-14 Tape Coatings for Steel Water Pipe 43214-2014 $49 $81

Bold indicates Standard is new, revised, or reaffirmed


3/6

AWWA STANDARDS

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016


PIPE AND ACCESSORIES (continued)

Steel Pipe (continued)

C215-10 Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines 43215 $49 $81

C216-15 Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water Pipe and Fittings 43216-2015 $49 $81

C217-09 Microcrustalline Wax and Petrolatum Tape Coatings for the Exterior of Connections and Fittings

for Steel Water Pipelines

43217 $49 $81

C218-08 Liquid Coating Systems for the Exterior of Aboveground Steel Water Pipelines and Fittings 43218 $49 $81

C219-11 Bolted, Sleeve-Type Couplings for Plain-End Pipe 43219 $49 $81

C220-12 Stainless-Steel Pipe, ½ In. (13 mm) and Larger 43220 $49 $81

C221-12 Fabricated Steel Mechanical Slip-Type Expansion Joints 43221-2012 $49 $81

C222-08 Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings 43222 $49 $81

C223-13 Fabricated Steel and Stainless-Steel Tapping Sleeves 43223-2013 $49 $81

C224-11 Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe,Connections, Fittings, and Special Sections

43224 $49 $81

C225-14 Fused Polyolefin Coatings for Steel Water Pipe 43225-2014 $49 $81

C226-13 Stainless-Steel Fittings for Waterworks Service, Sizes ½ In. Through 72 In. (13 mm Through

1,800 mm)

43226-2013 $60 $95

C227-11 Bolted, Split-Sleeve Restrained and Nonrestrained Couplings for Plain-End Pipe 43227 $49 $81

C228-14 Stainless-Steel Pipe Flange Joints for Water Service—Sizes 2 In. Through 72 In.(50 mm Through 1,800 mm)

43228-2014 $49 $81

C229-15 Fusion-Bonded Polyethylene Coatings for Steel Water Pipe and Fittings 43229-2015 $49 $81

C230-11 Stainless-Steel Full-Encirclement Repair and Service Connection Clamps 43230 $43 $71

Set of Steel Pipe Standards C200, C203, C205–C210, C213–C230, C602, C604, plus Manual M11 Steel Pipe. SAVE 21% STEEL $1,112 $1,785

Concrete Pipe

C300-11 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type 43300 $49 $81

C301-14 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type 43301-2014 $49 $81

C302-11 Reinforced Concrete Pressure Pipe, Noncylinder Type 43302 $49 $81

C303-08 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type 43303 $49 $81

C304-14 Design of Prestressed Concrete Cylinder Pipe 43304 $60 $95

Set of Concrete Pipe Standards C300, C301, C302, C303, C304, plus Manual M9 Concrete Pipe. SAVE 20% CONCRETE $272 $433

Valves and Hydrants

C500-09 Metal-Seated Gate Valves for Water Supply Service 43500 $49 $81

C502-14 Dry-Barrel Fire Hydrants 43502-2014 $49 $81

C503-14 Wet-Barrel Fire Hydrants 43503-2014 $49 $81

C504-15 Rubber-Seated Butterfly Valves. 43504-2015 $49 $81

C507-15 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm) 43507-2015 $49 $81

C508-09 Swing-Check Valves for Waterworks Service, 2-In. Through 24-In. (50-mm Through 600-mm) NPS 43508 $49 $81

C509-15 Resilient-Seated Gate Valves for Water Supply Service 43509-2015 $49 $81

C510-07 Double Check Valve Backflow Prevention Assembly 43510 $49 $81

C511-07 Reduced-Pressure Principle Backflow Prevention Assembly 43511 $49 $81

C512-15 Air-Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service 43512-2015 $48 $79

C514-15 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution Systemand Storage Facilities

43514-2015 $49 $81

C515-15 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service 43515-2015 $49 $81

C516-14 Large-Diameter Rubber-Seated Butterfly Valves, Sizes 78 In. (2,000 mm) and Larger 43516 $49 $81

C517-09 Resilient-Seated Cast-Iron Eccentric Plug Valves 43517 $49 $81

Bold indicates Standard is new, revised, or reaffirm


4/6

AWWA STANDARDS

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016


PIPE AND ACCESSORIES

Valves and Hydrants (continued)

C518-13 Dual-Disc Swing-Check Valves for Waterworks Service 43518-2013 $49 $81

C520-14 Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm) 43520-2014 $43 $71

C530-12 Pilot-Operated Control Valves 43530-2012 $49 $81

C541-08 Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates 43541 $43 $71

C542-09 Electric Motor Actuators for Valves and Slide Gates 43542 $43 $71

C550-13 Protective Interior Coatings for Valves and Hydrants 43550 $49 $81

C560-14 Cast-Iron Slide Gates 43560-2014 $49 $81

C561-14 Fabricated Stainless-Steel Slide Gates 43561-2014 $60 $95

C562-2014 Fabricated Aluminum Slide Gates 43562-2014 $43 $71

C563-2014 Fabricated Composite Slide Gates 43563-2014 $49 $81

Set of Valve Standards C500, C504, C507–C509, C512, C514, C515–C518, C520, C530, C541, C542, C550, C800, plusManuals M44 Distribution Valves, M49 Butterfly Valves, and M51 Air Release, Air/Vacuum Valves . SAVE 15%

VALVES $846 $1,250

Set of Hydrant Standards C502, C503, C550 plus Manual M17 Fire Hydrants. SAVE OVER 20% HYDRANTS $180 $288

Set of Backflow Standards C510 and C511 plus Manual M14 Recommended Practices for Backflow Prevention. SAVE 20% BACKFLOW $145 $233

PIPE INSTALLATION

C600-10 Installation of Ductile-Iron Mains and Their Appurtenances 43600 $60 $95

C602-11 Cement–Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger 43602 $49 $81

C604-11 Installation of Steel Water Pipe—4 In. (100 mm) and Larger 43604 $49 $81

C605-13 Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented PolyvinylChloride (PVCO) Pressure Pipe and Fittings

43605-2013 $49 $81

C606-15 Grooved and Shouldered Joints 43606-2015 $49 $81

C620-07 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger 43620 $49 $81

DISINFECTION OF FACILITIES

C651-14 Disinfecting Water Mains 43651-2014 $60 $95

C652-11 Disinfection of Water-Storage Facilities 43652 $60 $95C653-13 Disinfection of Water Treatment Plants 43653-2013 $49 $81

C654-13 Disinfection of Wells 43654-2013 $60 $95

C655-09 Field Dechlorination 43655 $43 $71

C670-15 Online Chlorine Analyzer Operation and Maintenance 43670-2015 $42 $68

METERS

C700-15 Cold-Water Meters—Displacement Type, Metal Alloy Main Case 43700-2015 $49 $81

C701-15 Cold-Water Meters—Turbine Type, for Customer Service 43701-2015 $49 $81

C702-15 Cold-Water Meters—Compound Type 43702-2015 $49 $81

C703-15 Cold-Water Meters—Fire-Service Type 43703-2015 $49 $81

C704-15 Propeller-Type Meters for Waterworks Applications 43704-2015 $49 $81

C706-10 Direct-Reading, Remote-Registration Systems for Cold-Water Meters 43706 $49 $81

C707-10 (R16) Encoder-Type Remote-Registration Systems for Cold-Water Meters 43707-10-R16 $49 $81

C708-15 Cold-Water Meters—Multijet Type 43708-2015 $49 $81

C710-15 Cold-Water Meters—Displacement Type, Plastic Main Case 43710-2015 $49 $81

C712-15 Cold-Water Meters—Singlejet Type 43712-2015 $49 $81

C713-15 Cold-Water Meters—Fluidic-Oscillator Type 43713-2015 $49 $81

Bold indicates Standard is new, revised, or reaffirme


5/6

AWWA STANDARDS

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016


METERS (continued)

C714-13 Cold-Water Meters for Residential Fire Sprinkler Systems in One- and Two-FamilyDwellings and Manufactured Houses

43713 $49 $81

C750-10 Transit-Time Flowmeters in Full Closed Conduits 43750 $49 $81

Set of Meter Standards C700, C701, C702, C703, C704, C707, C708, C710, C712, C713, C750plus Manuals M6 Water Meters and M33 Flowmeters. SAVE 19%

METERS $582 $928

SERVICE LINES

C800-14 Underground Service Line Valves and Fittings 43800-2014 $60 $95

PLASTIC PIPE

C900-07 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In.(100 mm Through 300 mm), for Water Transmission and Distribution

43900 $60 $95

C901-08 Polyethylene (PE) Pressure Pipe and Tubing, ½ In. (13 mm) Through 3 In. (76 mm),for Water Service

43901 $49 $81

C903-05 Polyethylene—Aluminum—Polyethylene & Cross-linked Polyethylene–Aluminum–Cross-linked Polyethylene Composite Pressure Pipes, ½ In. (12 mm) Through 2 In. (50 mm),for Water Service

43903 $49 $81

C904-16 Cross-Linked Polyethylene (PEX) Pressure Pipe, ½ In. (12 mm) Through 3 In. (76 mm),

for Water Service

43904-2016 $47 $81

C905-10 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In.(350 mm Through 1,200 mm)

43905 $60 $95

C906-15 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), forWaterworks

43906-2015 $60 $95

C907-12 Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In.(100 mm Through 300 mm), for Water Distribution

43907 $49 $81

C909-16 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. Through 24 In.(100 mm Through 600 mm), for Water, Wastewater, and Reclaimed Water Service

43909-2016 $48 $79

C950-13 Fiberglass Pressure Pipe 43950-2013 $60 $95

Set of PVC Standards C605, C900, C903, C905, C907, C909 plus Manual M23 PVC Pipe. SAVE OVER 23% PVC $304 $486

Set of Fiberglass Standards C950 and D120 plus Manual M45 Fiberglass Pipe Design. SAVE 20% FIBER $147 $235

Set of PE Standards C901, C903, C904, C906 plus Manual M55 PE Pipe. SAVE 20% PESET $218 $351

STORAGE

D100-11 Welded Carbon Steel Tanks for Water Storage 44100 $89 $115

D102-14 Coating Steel Water-Storage Tanks 44102-2014 $60 $95

D103-09 Factory-Coated Bolted Carbon Steel Tanks for Water Storage 44103 $89 $115

D104-11 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior SubmergedSurfaces of Steel Water Storage Tanks

44104 $49 $81

D106-16 Sacrificial Anode Cathodic Protection Systems for the Interior Submerged Surfaces of SteelWater Storage Tanks

44106-2016 $48 $79

D107-10 Composite Elevated Tanks for Water Storage 44107 $77 $106

D108-10 Aluminum Dome Roofs for Water Storage Facilities 44108 $43 $71D110-13 Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks 44110-2013 $79 $109

D115-06 Tendon-Prestressed Concrete Water Tanks 44115 $60 $95

D120-09 Thermosetting Fiberglass-Reinforced Plastic Tanks 44120 $49 $81

D121-12 Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-type Tanksfor Water Storage

44121 $79 $109

D130-11 Geomembrane Materials for Potable Water Applications 44130 $49 $81

Set of Storage Standards D130 plus Manual M25 Flexible Membrane Covers and Linings. SAVE 20% STORAGE $83 $136

Set of Tank Standards D100, D102–D104, D106–D108, plus Manual M42 Steel Water Storage Tanks. SAVE OVER 24% TANKS $416 $641

Bold indicates Standard is new, revised, or reaffirmed


6/6

AWWA STANDARDS

WW W.AWWA.ORG | 1.800.926.7337

| APRIL 2016

UTILITY MANAGEMENT

G100-11 Water Treatment Plant Operation and Management 47100 $43 $71

G200-15 Distribution Systems Operation and Management 47200-2015 $43 $71

G300-14 Source Water Protection 47300-2014 $43 $71

G400-09 Utility Management System 47400 $43 $71

G410-09 Business Practices for Operation and Management 47410 $49 $81

G420-09 Communications and Customer Relations 47420 $60 $95

G430-14 Security Practices for Operation and Management 47430-2014 $43 $71

G440-11 Emergency Preparedness Practices 47440 $60 $95

G480-13 Water Conservation Program Operation and Management 47480-2013 $43 $71

G481-14 Reclaimed Water Program Operation and Management 47481-2014 $43 $71

G510-13 Standard for Wastewater Treatment Plant Operations and Management 47510-2013 $43 $71

J100-10(R13) Risk and Resilience Management of Water and Wastewater Systems (reaffirmed without change in 2013) 40100 $129 $160

Set of Emergency and Security Standards G430, G440, J100, plus Manual M19 Emergency Planning. SAVE OVER 27% SECURITY $228 $336

Set of Standards for Small Systems A100, B300, C651, C652, G100, G200 SAVE 56% 20611 $131 $189


PUMPS

E102-06 Submersible Vertical Turbine Pumps 45102 $60 $95

E103-15 Horizontal and Vertical Line-Shaft Pumps 45103-2015

$60 $95

PLANT EQUIPMENT

F101-13 Contact-Molded, Fiberglass-Reinforced Plastic Wash-Water Troughs and Launders 46101-2013

$49 $81

F102-13 Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, andMounting Brackets

46102-2013

$49 $81

F110-12 Ultraviolet Disinfection Systems for Drinking Water 46110 $43 $71

Bold indicates Standard is new, revised, or reaffirmed.

FULL SETS OF AWWA STANDARDS (172+)

Full Set: PRINT Full set includes Binders & updates of new & revised Standards for one year from order date. 49000 $3,420 $5,429Full Set: PRINT renewal If you choose to subscribe, you pay this yearly renewal rate to receive new and revised Standards. renewal $695 $1,294

Binders (8) Standards are printed hole-punched to insert into these heavy-duty AWWA binders. 49005 $30/each $44/each

Binder Index Tabs These plastic index tabs are labeled with AWWA Standards categories. 47103 $12 $21

Full Set: CD-ROM single& Yearly Renewal Rate

This Single User License gives access for one user to the Standards in PDF format, delivered onCD-ROM. Pay the inital fee, then each year afterward pay the renewal rate to receive updates.

40000 $3,420 $5,429

renewal $695 $1,294

Full Set: CD-ROM 2-9 & Yearly Renewal Rate

This Multi-User License gives access for 2-9 users to the Standards in PDF format, delivered onCD-ROM. Pay the inital fee, then each year afterward pay the renewal rate to receive updates.

40001A $6,158 $9,775

renewal $1,321 $2,262

Full Set: CD-ROM 10-24 & Yearly Renewal Rate

This Multi-User License gives access for 10-24 users to the Standards in PDF format, delivered onCD-ROM. Pay the inital fee, then each year afterward pay the renewal rate to receive updates.

40001B $9,237 $14,662

renewal $1,982 $3,394

Full Set: CD-ROM 25-49

& Yearly Renewal Rate

This Multi-User License gives access for 25-49 users to the Standards in PDF format, delivered on

CD-ROM. Pay the inital fee, then each year afterward pay the renewal rate to receive updates.

40001C $11,344 $18,005

renewal $2,434 $4,168Full Set: CD-ROM 50+ & Yearly Renewal Rate

This Multi-User License gives access for 50+ users to the Standards in PDF format, delivered onCD-ROM. Pay the inital fee, then each year afterward pay the renewal rate to receive updates.

40001D $13,612 $21,606

renewal $2,920 $4,997

awwa standards april 2016

Documents