avk high pressure, 250 psi, dry barrel fire · pdf file· approved according to ce reg....
TRANSCRIPT
Various outlet couplings, landing valves and extension piecesAccessories:
· UL/ULC listed and FM approved· CE marking· Meets or exceeds AWWA C502 (latest) + DIN EN 14384· High pressure rating (250 psi)· 2 x 2.5" NST hose nozzles + 1 x 4" NST pumper nozzle· The breakable flange and stem rod coupling ensure no leaking and easy repair at traffic knock down· Ductile iron nozzle section, barrel section, bonnet, and base· 5.25" valve opening for high flow rating· Hydrant drain easily plugged if required - may be plugged internally or externally· Extensions available in lengths from 6" to 60"· 1.5" pentagon operating nut· Epoxy coating according to DIN 30677-2, GSK approved
Features:
Product description:
· Flange drilling to ANSI B 16.42, class 150
· Hydraulic test according to EN 1074-6 / VP 325 (3321)· Hydraulic test to FM Class 1510, UL 246 and ULC CAN/ULC-5520-M91· Approved according to CE Reg. No. 0620-CPR-6122· FM Approved. UL and ULC listed
· Designed according to AWWA C502, Design according to EN 14384:2005Standards:
Dry barrel hydrant for fire protection application
Test/Approvals:
AVK dry barrel hydrants are designed with a traffic flange for easy repair after collision. The hydrant’s main valve has a ductile iron core which is fully encapsulated in EPDM rubber. The nozzle section can be rotated 360 degrees. The upper section of the hydrant is repairable under pressure.
UL/FM approved, modern type, internals in AISI 316, coupling AISI 318, pins inconel 718, straightinlet flange
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT 27/EI-002
1/218-Mai-2017 16:44ilke -
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
COPYRIGHT©AVK GROUP 2017
UL/FM approved, modern type, internals in AISI 316, coupling AISI 318, pins inconel 718, straight inlet flange
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT 27/EI-002
Component list:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Main valve disc
Base gasket
Lower seat O-ring
Drain bushing
Valve seat ring
Upper seat O-ring
Lower barrel O-ring
Stand pipe flange
Lock ring
Nut
Breakable flange
Bolt/nut
Screw
Seat removal/lock pin
O-ring
Stop nut
Stem nut
Anti friction washer
Ductile iron, EPDM encapsulated
NBR rubber
NBR rubber
Bronze
Bronze
NBR rubber
NBR rubber
Ductile iron
Stainless steel
Stainless steel
Ductile iron
Stainless steel AISI 316
Stainless steel AISI 316
Inconel 718
NBR rubber
Steel, zinc plated
Bronze
Polyamide
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Weather shield
Base
Lower barrel
Lower stem rod
Breakable coupling
Barrel gasket
Upper barrel
Upper stem rod
Cap chain
Nozzle O-ring
Nozzle
Cap gasket
Cap
Nozzle section
Thrust nut
Nozzle lock screw
Breakable couplingpins
Cast iron
Ductile iron
Ductile iron
Stainless steel AISI 316
Stainless Steel AISI 318
NBR rubber metal insert
Ductile iron
Stainless steel AISI 316
Steel, zinc plated
NBR rubber
Bronze
NBR rubber
Cast iron
Ductile iron
Bronze
Stainless steel
Inconel 718
Components may be substituted with equivalent or higher class materials without prior notification.
Reference nos. and dimensions:
AVK ref. no. DN
mm
Theoretical
weight / kg
H3
mm
H5
mm
L
mm
27-EI-U7205-0000J-CQ 150 163 1854 1067 343
Row to make sure table is never blank
2/218-Mai-2017 16:44ilke -
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
COPYRIGHT©AVK GROUP 2017