aveva pdms syllabus.pdf
TRANSCRIPT
7/17/2019 AVEVA PDMS Syllabus.pdf
http://slidepdf.com/reader/full/aveva-pdms-syllabuspdf 1/3
Session 1 EQUIPMENT DESIGN MODULES
Skill Focus:
Storage Database, Navigate around PDMS, Attributes in PDMS
Creating the Standard Equipments
Equipment Modeling- As per vendor drawing and equipment layoutChanging the position of the component with respect to world command
Modify command
Rotate command
Mirror command
Offset command
Measure command
Session 2 PIPING MODULE
Skill Focus:
Routing pipes – As per piping layout and P&ID
Modify Pipe
Usage of model editor.
Solving Data inconsistency & Clash Check
Piping commands (All Piping commands are covered)
Generate Report from 3D Design
Session 3-4 ISODRAFT MODULE
Skill Focus:
Isometric Generation- As per pipe routings
Extracting of Isodraft
Splitting of Isometrics
Export the drawing to AutoCAD
Session 5 Basic Drawing Production &
DRAFT MODULE
Skill Focus:
Create 2D Drawing such Plot Plan and PipingGA
Modeling of Pipes Supports
Final output of Plant layout
GA-Drawing creation in 2D
Creation of sectional views
Dimensioning, Labeling
Export the drawing to AutoCAD
Reflecting the design changes in draft
Commands in draft
7/17/2019 AVEVA PDMS Syllabus.pdf
http://slidepdf.com/reader/full/aveva-pdms-syllabuspdf 2/3
Session 7 PDMS STRUCTURAL OVERVIEW & DESIGN
MODULE
Structure in PDMS, Storage Database, Navigate around PDMS,
Attributes in
PDMS
PDMS Structural Design Features
How PDMS Represents Structural Members
Starting the Structural Application
Creating a Simple Structure
Design-to-Catalogue Cross-Referencing
Equipment Modeling- As per vendor drawing and equipment layout
Equipment commands
Changing the position of the component with respect to world command
Modify command, Rotate command, Mirror command, Offset command
Session 8 SECTIONS, BRACING, NODES & PROFILES
DESIGN MODELING
Straight Sections, Nodes & Profile
Enhancing the Basic Structure
Trimming Connected Section Ends to Correct Geometry
Adding and Modifying Simple Bracing
Adding Standard Bracing Configurations
Representing Joints
Session 9 PANEL, PLATES & FITTING DESIGN
MODELING
Adding Panels and Plates
Measuring Distances/Directions in the Design Model
Splitting a Panel
Tailoring Panel Edges by Editing Individual Vertices
Moving Panel Edges to New Positions
Creating Negative Extrusions
Using Panel Fittings
How Panel Fittings are Defined
Creating a Panel Fitting
Session 10 STRUCTURAL DESIGN CLASH
DETECTION
Checking for Clashes
Obstruction Levels
Extent of Clashing
Clash Detection Process
Generating a Data Output Report
Plotting the Design Model
7/17/2019 AVEVA PDMS Syllabus.pdf
http://slidepdf.com/reader/full/aveva-pdms-syllabuspdf 3/3
Sesi 11 STRUCTURE SEMICIRCULAR PLATFORM DESIGN,
PROFILES & JOINTS DESIGN MODELING
Creating a Semicircular Platform
Defining a Working Grid
Creating a Curved SectionModifying a Curved Section
Production Features for Outfit Steel
P-line Identification
Some Standard Profiles
Some Standard Joints
Sesi 12 COLUMN & PLATES CONNECTIONColumn Connections
Cleated Connections
Baseplate Connections
Double Notched End Plates
Single Notched End Plates