aventos lift systems quality of motion - trade distributor, cabinet … · 2016. 12. 1. · aventos...
TRANSCRIPT
AVENTOS fittings for lift systems provide ease of use in the wall cabinet area. Even wide lift systems open easily, remain in any desired position and – thanks to BLUMOTION – close silently and effortlessly.
SERVO-DRIVE, the electrical motion support system, is also available for the AVENTOS range, allowing electrical opening with a light touch, and closing at the push of a button.
AVENTOS lift systems Quality of motion
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.101
A
Draw
ers, Hinges &
Assembly D
evices
SERVO-DRIVE FOR TANDEMBOX
STANDARD CABINET
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With vertical bracket profile • No fixed connection to the drive system • Pull-outs can be used unchanged • Tool-free assembly • Simple cabling • Shallow installation depth
2. Bracket ProfileLength Cable Blum No Code670mm With Z10T670AA 1-244-067750mm With Z10T750AA 1-244-075
1170mm Without Z10T1170AA 1-244-070
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
10. Trigger guidance for chipboard backFor cabinet width KB 275 - 320 mmMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3H00 1-244-006
12. Connecting Node & Cable End ProtectorIncludes:1 x Connection node2 x Cable end protectorsMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
1. Blum Distance BumperUp to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No CodeØ 5 mm 993.0530 1-244-009
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Panel Housing - alternative to 15aMaterial Blum No CodeNylon Z10NG120 1-244-055
19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
Accessories18. Syncronisation CablesLength Blum No Code1600mm Z10K160S 1-244-0241200mm Z10K120S 1-244-022
80mm Z10K008S 1-244-020
3a. Profile Attachment Top/BottomMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01E0.01 1-244-012
Rear cross rail construction, horizontal
3b. Profile Attachment Bottom & BackIncludes Back bracket cover capMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01EA.01 1-244-014
Rear cross rail construction, vertical, alternative to 3a
11. Distribution Cable & Cable End ProtectorFor cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectorsLength Blum No Code8m Z10K800AE 1-244-080
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.102
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Drilling distance base/cross bar
Drilling position and space requirement for all applications
Drilling position and min. space requirement
Planning - horizontal cross member
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Cabinet width KB 275 - 420 mm NL Nominal length X Drilling position Y Min. space requirement
Cabinet width KB 320 - 420 mm| Steel back height NCabinet width KB starting at 420mm
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions
Back X (mm) Y(mm)Steel back NL + 2 Min. LT = NL +16Chipboard back NL + 19 Min. LT = NL +33
Back X (mm) Y(mm)Steel back NL - 1 Min. LT = NL +13Chipboard back NL + 16 Min. LT = NL +30
SERVO-DRIVE FOR TANDEMBOX (BOTTOM & BACK)
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.103
A
Draw
ers, Hinges &
Assembly D
evices
Page Instructions
Planning - horizontal cross member
Lower cabling
Alternative drilling pattern for PRO-CENTER and MINIPRESS
Back cabling Front assembly - position of Blum distance bumper Drawer with overlay front
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay
FH Front height
Bracket profile cutting dimensions
LH Internal cabinet height PL Bracket profile length
All back heights except height N
LH Internal cabinet height PL Bracket profile length KB Cabinet width
Back height N
Position - drive unit
> 320 mm
48.5
48.5
27.5
< 320 mm
48.5
27.555.5
27.5
35.0
Cabinet width KB
Steel back
Chipboard back
Y (mm)X (mm)Y (mm)X (mm)Back height N
SERVO-DRIVE FOR TANDEMBOX
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.104
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Drilling distance base/cross bar
Drilling position and space requirement for all applications
Drilling position and min. space requirement
Planning - vertical cross member
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Cabinet width KB 275 - 420 mm NL Nominal length X Drilling position Y Min. space requirement
Cabinet width KB 320 - 420 mm Steel back height NCabinet width KB starting at 420mm
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions
Back X (mm) Y(mm)Steel back NL + 2 LT = NL +17Chipboard back NL + 19 LT = NL +34
Back X (mm) Y(mm)Steel back NL - 1 LT = NL +14Chipboard back NL + 16 LT = NL +31
SERVO-DRIVE FOR TANDEMBOX (TOP & BOTTOM)
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.105
A
Draw
ers, Hinges &
Assembly D
evices
Page Instructions
Planning - horizontal cross member
Lower cabling
Alternative drilling pattern for PRO-CENTER and MINIPRESS
Back cabling Front assembly - position of Blum distance bumper Drawer with overlay front
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay
FH Front height
Bracket profile cutting dimensions
LH Internal cabinet height PL Bracket profile length
All back heights except height N
LH Internal cabinet height PL Bracket profile length KB Cabinet width
Back height N
Position - drive unit
> 320 mm
48.5
48.5
27.5
< 320 mm
48.5
27.555.5
27.5
35.0
Cabinet width KB
Steel back
Chipboard back
Y (mm)X (mm)Y (mm)X (mm)Back height N
SERVO-DRIVE FOR TANDEMBOX
Create pockets of hidden storage to maintain a clean and uncluttered look in your kitchen, or customise your bench height with LINAK electric lift systems.
LINAK can be used to provide hidden storage that pops up from the benchtop at the touch of a switch – perfect for obtaining that clutter free look in an instant.
The LINAK system also allows you to raise or lower the height of your benches for an ergonomic space no matter what you are doing – whether chopping vegetables, using appliances or working on the computer, you can adjust the height of the bench for maximum comfort.
Modern & multi-functional hidden storage
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.107
A
Draw
ers, Hinges &
Assembly D
evices
SPACE TOWER
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With vertical bracket profile • No fixed connection to the drive system • Pull-outs can be used unchanged• Tool-free assembly• Simple cabling• Shallow installation depth
2. Bracket ProfileLength Cable Blum No Code670mm With Z10T670AA 1-244-067750mm With Z10T750AA 1-244-075
1170mm Without Z10T1170AA 1-244-070
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
12. Connecting Node & Cable End ProtectorIncludes:1 x Connection node2 x Cable end protectorsMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
11. Distribution Cable & Cable End ProtectorFor cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectorsLength Blum No Code8m Z10K800AE 1-244-080
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Panel Housing - alternative to 15aMaterial Blum No CodeNylon Z10NG120 1-244-055
Accessories19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
3a. Profile Attachment Top/BottomMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01E0.01 1-244-012
Rear cross rail construction, horizontal
3b. Profile Attachment Bottom & BackIncludes Back bracket cover capMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01EA.01 1-244-014
Rear cross rail construction, vertical, alternative to 3a
SERVO-DRIVE FOR TANDEMBOX
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.108
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Drilling distance base/cross bar Drilling distance base/cross bar
Drilling position and space requirement for all applications Drilling position and space requirement for all applications
Drilling position and min. space requirement Drilling position and min. space requirement
Planning - bracket profile top Planning - bracket profile bottom
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing).
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions Cabinet dimensions
Back X (mm) Y(mm)Steel back NL + 2 LT = NL +17Chipboard back NL + 19 LT = NL +34
Back X (mm) Y(mm)Steel back NL + 2 LT = NL +16Chipboard back NL + 19 LT = NL +33
Back X (mm) Y(mm)Steel back NL - 1 LT = NL +14Chipboard back NL + 16 LT = NL +31
Back X (mm) Y(mm)Steel back NL - 1 LT = NL +13Chipboard back NL + 16 LT = NL +30
Cabinet width KB 275 - 420 mm NL Nominal length X Drilling position Y Min. space requirement
Cabinet width KB 275 - 420 mm NL Nominal length X Drilling position Y Min. space requirementCabinet width KB starting at 420mm Cabinet width KB starting at 420mm
SERVO-DRIVE FOR TANDEMBOX
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.109
A
Draw
ers, Hinges &
Assembly D
evices
Page Instructions
Planning - drilling pattern base
Lower cabling
Alternative drilling pattern for PRO-CENTER and MINIPRESS
Back cabling Position - drive unit
All back heights except height N
LH Internal cabinet height PL Bracket profile length KB Cabinet width
Bracket profile cutting dimensions
LH Internal cabinet height PL Bracket profile length
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
SERVO-DRIVE FOR TANDEMBOX
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.110
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
UNO FOR BOTTOM MOUNT WASTE BIN SOLUTIONS
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• For bottom mount waste bin solutions • No fixed connection to the drive system • Pull-outs can be used unchanged • Quick assembly of pre-mounted parts • Also ideal for retrofitting
SERVO-DRIVE FOR TANDEMBOX
16. SERVO-DRIVE set Description Blum No CodeUno set for bottom mount Z10NA20KD01 1-244-000
Includes: Item No2 x Distance bumper 11 x Attachment bracket - 1 tier 41 x Drive unit 91 x Transport protection 16a1 x Protection against dripping water 16bBlum transformer incl. cable 16c1 x Assembly Device 16d7 x Screws for Blum distance bumper and attachment bracket1 x Installation instructions1 x Instruction leaflet
Planning
Drilling distances base
LW Inner cabinet width NL Nominal length X Drilling position Chipboard back: NL - 42 mm Y Min. space requirement Chipboard back: NL + 35 mm
The Blum distance bumper creates and maintains the required trigger path of 2 mm
Position - Blum distance bumper Position - cabinet profile
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.111
A
Draw
ers, Hinges &
Assembly D
evices
UNO FOR TOP MOUNT WASTE BIN SOLUTIONS
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• For bottom mount waste bin solutions • No fixed connection to the drive system • Pull-outs can be used unchanged • Quick assembly of pre-mounted parts • Also ideal for retrofitting
SERVO-DRIVE FOR TANDEMBOX
16. SERVO-DRIVE set Uno set for top mount Blum No Code450mm Z10T393WK 1-244-001600mm Z10T543WK 1-244-003
Includes: Item No2 x Distance bumper 11 x Bracket profile - hortzontal 61 x Drive unit 91 x Protection against dripping water 16b1 x Blum transformer incl. cable 16c1 x Bracket profile adapter left/right 16e6 x Screws for Blum distance bumper and attachment bracket1 x Installation instructions1 x Instruction leaflet
Planning
The Blum distance bumper creates and maintains the required trigger path of 2 mm
Position - Blum distance bumper
* European image shown. * European side brackets shown.
Made from a combination of metal and plastic for added strength and durability, the 560 Waste Program features a stylish matt grey finish, individual bucket lids and the option of a metal cabinet lid to help mask and minimise odours.
The 560 Waste Program comes in a variety of different sizes and bucket heights to suit a range of cabinet widths and has been designed to suit Blum’s TANDEMBOX intivo and TANDEMBOX antaro range. To completely automate your waste system, install Blum’s SERVO-DRIVE for hands free opening and closing.
560 Waste Program designer waste management
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.113
A
Draw
ers, Hinges &
Assembly D
evices
SINK CABINET
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With attachment bracket/s• No fixed connection to the drive system • Pull-outs can be used unchanged • Tool-free assembly• Simple cabling• Shallow installation depth
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
9a. Dripping water protection coverMaterial Colour Blum No CodeNylon RAL 7037 Z10D0316 1-244-025
12. Connecting Node & Cable End ProtectorIncludes:1 x Connection node2 x Cable end protectorsMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
1. Blum Distance BumperUp to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No CodeØ 5 mm 993.0530 1-244-009
4. Attachment bracket 2 tierMaterial Blum No CodeNylon Z10D7201.01 1-244-017
5. Attachment bracket 1 tierMaterial Blum No CodeNylon Z10D0311 1-244-015
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Panel Housing - alternative to 15aMaterial Blum No CodeNylon Z10NG120 1-244-055
19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
11. Distribution Cable & Cable End ProtectorFor cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectorsLength Blum No Code8m Z10K800AE 1-244-080
SERVO-DRIVE FOR TANDEMBOX
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.114
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Drilling distance base/cross bar
Drilling position and space requirement for all applications
Drilling position and min. space requirement
Planning
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Cabinet width KB starting at 900 mm NL Nominal length X Drilling position Y Min. space requirement
Chipboard back
• Measured from cabinet front edge
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions
Back X (mm) Y(mm)Steel back NL + 2 Min. LT = NL +16Chipboard back NL + 19 Min. LT = NL +33
Back X (mm) Y(mm)Steel back NL - 1 Min. LT = NL +13Chipboard back NL + 16 Min. LT = NL +30
SERVO-DRIVE FOR TANDEMBOX
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.115
A
Draw
ers, Hinges &
Assembly D
evices
SERVO-DRIVE FOR TANDEMBOX (SINK DRAWER)
Planning - horizontal cross member
Lower cabling
Alternative drilling pattern for PRO-CENTER and MINIPRESS
Front assembly - position of Blum distance bumper Drawer with overlay front
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay
FH Front height
Cross member - attachment bracket 1 tier
min 81
Position
Cabinet width KB starting at 900mm
Steel back X = 159.5 mm Chipboard back X = 176.5 mm Drilling depth 8 mm
Drilling pattern - top plan view Drilling position in cabinet
Chipboard back height N
• Measured from cabinet front edge
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.116
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
STANDARD CABINET - BRACKET PROFILE HORIZONTAL
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With attachment bracket and horizontal profile• No fixed connection to the drive system • Pull-outs can be used unchanged• Tool-free assembly• Simple cabling • Shallow installation depth
SERVO-DRIVE FOR TANDEMBOX
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
10. Trigger guidance for chipboard backFor cabinet width KB 275 - 320 mmMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3H00 1-244-006
12. Connecting Node & Cable End ProtectorIncludes:1 x Connection node2 x Cable end protectorsMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
1. Blum Distance BumperUp to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No CodeØ 5 mm 993.0530 1-244-009
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Panel Housing - alternative to 15aMaterial Blum No CodeNylon Z10NG120 1-244-055
Accessories19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
6. Bracket ProfileFor cabinet width KB 275 - 1200 mmMaterial Length Blum No CodeAluminium 1143mm Z10T1143B 1-244-065
7. Bracket profile attachment left/rightMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D05210 1-244-010
11. Distribution Cable & Cable End ProtectorFor cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectorsLength Blum No Code8m Z10K800AE 1-244-080
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.117
A
Draw
ers, Hinges &
Assembly D
evices
SERVO-DRIVE FOR TANDEMBOX
Position - drive unit
Drilling position and space requirement for all applications
Drilling position and min. space requirement
Planning
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Cabinet width KB 420 - 1200mm
Chipboard screws and system screws can be used * 55.5 mm for back height N ** 23.5 mm for back height N
Cabinet width KB 275 - 420mmCabinet width KB 275 - 420mm Steel Back height N
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions
Space requirement in cabinet
Back X (mm) Y(mm)Steel back NL - 26 Min. LT = NL + 20Chipboard back NL - 9 Min. LT = NL + 37
Back X (mm) Y(mm)Steel back NL - 29 Min. LT = NL +17Chipboard back NL - 12 Min. LT = NL +34
Front assembly - position of Blum distance bumper
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay
FH Front height
LW Inner cabinet width
NL Nominal length X Drilling position Y Min. space requirement
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.118
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
STANDARD CABINET - UPPER ATTACHMENT BRACKET
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With upper attachment bracket• No fixed connection to the drive system• Pull-outs can be used unchanged• Tool-free assembly• Simple cabling• Shallow installation depth
SERVO-DRIVE FOR TANDEMBOX
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
10. Trigger guidance for chipboard backFor cabinet width KB 275 - 320 mmMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3H00 1-244-006
12. Connecting Node & Cable End ProtectorIncludes:1 x Connection node2 x Cable end protectorsMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
1. Blum Distance BumperUp to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No CodeØ 5 mm 993.0530 1-244-009
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Panel Housing - alternative to 15aMaterial Blum No CodeNylon Z10NG120 1-244-055
Accessories19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
8. Upper attachment bracketwith pre mounted adaptor for the drive unitMaterial Colour Blum No Code
SteelRAL 7037 / zinc plated
Z10D6252 1-244-019
11. Distribution Cable & Cable End ProtectorFor cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectorsLength Blum No Code8m Z10K800AE 1-244-080
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.119
A
Draw
ers, Hinges &
Assembly D
evices
SERVO-DRIVE FOR TANDEMBOX
Drilling distance base/cross bar
Drilling position and space requirement for all applications
Drilling position and min. space requirement
Planning
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth
Back height N
Cabinet width KB 275 - 420mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm
Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling.
SERVO-DRIVE can also be used if there is less space available. At the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing).
Cabinet dimensions
Position - drive unit
Back X (mm) Y(mm)Steel back NL - 18 Min. LT = NL +16.5Chipboard back NL - 1 Min. LT = NL + 33.5
Cabinet width KB 275-320 Starting at 320Back height X (mm) Y(mm)Steel back 27.5 27.5Chipboard back 35.0 27.5
Back X (mm) Y(mm)Steel back NL - 21 Min. LT = NL +13.5Chipboard back NL + 4 Min. LT = NL +30.5
Front assembly - position of Blum distance bumper
The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation FA Front overlay
FH Front height
All back heights except height N KB Cabinet width
Upper attachment bracket drilling position
The cross bar must be connected to the work plate to make it secure
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.120
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
COMBOX SET WITH ASSEMBLY ACCESSORIES
• For preventing front collisions when using SERVO-DRIVE in corner situations
SYNCHRONISATION CABLE
• Connects two drive units that need to activate simultaneously
Description Blum No CodeCOMBOX for SERVO-DRIVE Z10ZC00A 1-244-018
Length Blum No Code80mm Z10K008S 1-244-0201200mm Z10K120S 1-244-0221600mm Z10K160S 1-244-024
SERVO-DRIVE FOR TANDEMBOX
suitable ONLY with drive unit Z10A3000.02 (1-244-044)
Application
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.121
A
Draw
ers, Hinges &
Assembly D
evices
Attachment bracket 1 tier Attachment bracket 2 tierBracket profile cable - SPACE TOWER
Bracket profile - bottom and backBracket profile - top and bottom
Drive unit - bracket profile
Bracket profile cableBlum distance bumper
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Remove pre-mounted bracket profile
cable from both bracket profiles and
insert a new, long bracket profile cable
in the upper bracket profile
Insert Blum distance bumper (do not
glue)
A 2nd drive unit can also be installed
(optional). Please observe min. inner
cabinet width!
Assembly
AssemblyAssembly
Equip bracket profile 1 Bracket profile cable
2 Communication cable
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.122
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Drive unit - upper attachment bracketUpper attachment bracket
Drive unit - bracket profile adapter
Bracket profile
Bracket profile cable
Bracket profile adapeter
Drive unit - attachment bracket
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Assembly
Assembly
AssemblyAssembly
Assembly
Chipboard screws and system screws
can be used
Equip bracket profile adapter
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.123
A
Draw
ers, Hinges &
Assembly D
evices
Panel fixing
Base fixing
Blum transformer 72 W
AttentionMaintain a 30 mm safety distance from
the bottom edge (base fixing) and/or
front edge (panel fixing) and side edges
of the transformer unit housing to the
neighbouring elements
Air must be able to circulate, otherwise
the Blum transformer could overheat
Pull-out stop
Pull-out stop
Base fixing
Base fixing Panel fixing
Panel fixing
Space requirement and safety distance
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.124
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Connecting node
Bracket profile horizontal Upper attachment bracket
Standard cabinet - lower cabling Standard cabinet - back cabling
SPACE TOWER
Assembly
Base fixing
Only one Blum transformer can be
connected to each distribution cable.
Base fixingPanel fixing Panel fixing
Do not damage piercing tips
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Base fixing Panel fixing
Lower cablingLower cabling
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.125
A
Draw
ers, Hinges &
Assembly D
evices
Trigger guidance
Lever extension
Drive unit
Selector switch Mode (1)Single: Only one drive unit moves
(standard setting)
Multiple: When set to “Multiple,” drive
units move simultaneously
NoteNot applicable for SERVO-DRIVE uno
Selector switch Power (2)Full: Standard setting
Half: for short nominal lengths (270 -
300 mm) – pull-out only moves a short
distance
Operating mode display (LED) (3)
The drive unit comes with the lever
extension.
The lever extension must be removed
for cabinet widths 300 - 320 mm in
combination with a steel back
The lever extension must also be
removed for a cabinet width of 300 mm
in combination with a chipboard back
The lever guide must be attached and
secured with screws for cabinet widths
275 - 320 mm in combination with a
chipboard back
AssemblyRemoval
Selector switch
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.126
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
Upper attachment bracket
Bracket profile horizontal
Bracket profile
Attachment bracket
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Removal
Removal
Removal
Removal
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.127
A
Draw
ers, Hinges &
Assembly D
evices
Bracket profile horizontal
Blum transformer 72 W
Bracket profile
SERVO-DRIVE FOR TANDEMBOX ASSEMBLY, REMOVAL, AND ADJUSTMENT
Removal
Base fixing Panel fixing
Horizontal cross member Vertical cross member