avaldatud 05.07.2006
TRANSCRIPT
Avaldatud 05.07.2006
SISUKORD HARMONEERITUKS TUNNISTATUD STANDARDID.......................................................................2 WTO SEKRETARIAADILT SAABUNUD SPS TEATISED ..................................................................3 WTO SEKRETARIAADILT SAABUNUD TBT TEATISED .................................................................10 UUED STANDARDID JA KAVANDID ARVAMUSKÜSITLUSEKS ..................................................14 ICS PÕHIRÜHMAD..................................................................................................................................15 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON ..............16 03 TEENUSED. ETTEVÕTTE ORGANISEERIMINE, JUHTIMINE JA KVALITEET.
HALDUS. TRANSPORT. SOTSIOLOOGIA.....................................................................................17 07 MATEMAATIKA. LOODUSTEADUSED..........................................................................................20 11 TERVISEHOOLDUS ...........................................................................................................................20 13 KESKKONNA- JA TERVISEKAITSE. OHUTUS..............................................................................22 17 METROLOOGIA JA MÕÕTMINE. FÜÜSIKALISED NÄHTUSED ................................................25 19 KATSETAMINE ..................................................................................................................................25 21 ÜLDKASUTATAVAD MASINAD JA NENDE OSAD .....................................................................26 23 ÜLDKASUTATAVAD HÜDRO- JA PNEUMOSÜSTEEMID JA NENDE OSAD...........................28 25 TOOTMISTEHNOLOOGIA ................................................................................................................31 27 ELEKTRI- JA SOOJUSENERGEETIKA ............................................................................................33 29 ELEKTROTEHNIKA...........................................................................................................................33 31 ELEKTROONIKA................................................................................................................................38 33 SIDETEHNIKA ....................................................................................................................................40 35 INFOTEHNOLOOGIA. KONTORISEADMED..................................................................................69 37 VISUAALTEHNIKA............................................................................................................................72 43 MAANTEESÕIDUKITE EHITUS.......................................................................................................73 45 RAUDTEETEHNIKA...........................................................................................................................73 47 LAEVAEHITUS JA MERE-EHITISED ..............................................................................................74 49 LENNUNDUS JA KOSMOSETEHNIKA ...........................................................................................74 53 TÕSTE- JA TEISALDUSSEADMED..................................................................................................83 59 TEKSTIILI- JA NAHATEHNOLOOGIA............................................................................................84 61 RÕIVATÖÖSTUS ................................................................................................................................85 65 PÕLLUMAJANDUS ............................................................................................................................85 67 TOIDUAINETE TEHNOLOOGIA ......................................................................................................86 71 KEEMILINE TEHNOLOOGIA ...........................................................................................................87 73 MÄENDUS JA MAAVARAD .............................................................................................................87 75 NAFTA JA NAFTATEHNOLOOGIA .................................................................................................87 77 METALLURGIA ..................................................................................................................................88 79 PUIDUTEHNOLOOGIA......................................................................................................................89 81 KLAASI- JA KERAAMIKATÖÖSTUS ..............................................................................................89 83 KUMMI- JA PLASTITÖÖSTUS .........................................................................................................90 85 PABERITEHNOLOOGIA....................................................................................................................91 87 VÄRVIDE JA VÄRVAINETE TÖÖSTUS..........................................................................................91 91 EHITUSMATERJALID JA EHITUS ...................................................................................................92 93 RAJATISED..........................................................................................................................................96 97 OLME. MEELELAHUTUS. SPORT ...................................................................................................97 STANDARDITE TÕLKED KOMMENTEERIMISEL.............................................................................101 STANDARDITE MÜÜGI TOP JUUNI ....................................................................................................103
1
HARMONEERITUKS TUNNISTATUD STANDARDID
Tehnilise normi ja standardi seaduse muutmise seaduse (RT I 2002, 32, 186) kohaselt avaldab Eesti Standardikeskus oma veebilehel ja väljaandes teavet harmoneeritud standarditest. Harmoneeritud (ühtlustatud) standardid on EL Uue lähenemisviisi direktiividega liituvad standardid. Harmoneeritud standarditeks loetakse need standardid, millele on viidatud EL ametlikus väljaandes Official Journal. Harmoneeritud standardite kasutamine on kõige lihtsam viis tõendada direktiivide oluliste nõuete täitmist. Lisainfo http://www.newapproach.org/ . EVS Teatajas ja EVS kodulehel saab tutvuda Uue lähenemisviisi direktiivide all harmoneeritud standarditega. Ühtlasi avaldame ka, millised neist standarditest on üle võetud Eesti standarditeks. Seekord on avaldatud väikelaevade, aktiivsete siirdatavate medisiiniseadmete ja mänguasjade standardid (avaldatud mai ja juuni 2006 Euroopa Ühenduste Teataja C-seerias). Kõik seekord avaldatud standardid on üle võetud Eesti standarditeks
NÕUKOGU DIREKTIIV 94/25/EÜ Väikelaevad (2006/C 113/03)
13.05.2006 Viidatud standardi tähis ja standardi pealkiri Viide asendatavale
standardile Kuupäev, mil asendatava standardi järgimisest tulenev vastavuseeldus kaotab kehtivuse
EN ISO 10087:2006 Väikelaevad. Laevakere tuvastamine. Kodeerimissüsteem / Small craft - Craft identification - Coding system
EN ISO 10087:1996 30.9.2006
NÕUKOGU DIREKTIIV 88/378/EMÜ Mänguasjad (2006/C 127/03)
31.05.2006 Viidatud standardi tähis ja standardi pealkiri Viide asendatavale
standardile Kuupäev, mil asendatava standardi järgimisest tulenev vastavuseeldus kaotab kehtivuse
EN 71-2:2006 Mänguasjade ohutus. Osa 2: Süttivus / Safety of toys - Part 2: Flammability
EN 71-2:2003 31.7.2006
EN 71-5:1993/A1:2006 Mänguasjade ohutus. Osa 5: Keemilised mänguasjad (komplektid), välja arvatud katsekomplektid / Safety of toys - Part 5: Chemical toys (sets) other than experimental sets
- 31.7.2006
2
NÕUKOGU DIREKTIIV 90/385/EMÜ Aktiivsed siirdatavad meditsiiniseadmed (2006/C 129/02)
02.06.2006 Viidatud standardi tähis ja standardi pealkiri Viide asendatavale
standardile Kuupäev, mil asendatava standardi järgimisest tulenev vastavuseeldus kaotab kehtivuse
EN ISO 10993-18:2005 Meditsiiniseadmete bioloogiline hindamine. Osa 18. Materjalide keemiline iseloomustus / Biological evaluation of medical devices - Part 18: Chemical characterization of materials
- -
EN ISO 11140-1:2005 Tervishoiutoodete steriliseerimine. Keemilised näitajad. Osa 1: Üldised nõuded / Sterilization of health care products - Chemical indicators - Part 1: General requirements
- -
WTO SEKRETARIAADILT SAABUNUD TEATISED Maailma Kaubandusorganisatsiooni WTO sekretariaadilt saabunud õigusaktide eelnõud, milles sisalduvad tehnilised normid võivad saada kaubanduse tehnilisteks tõketeks. Eelnõude kohta on võimalik esitada kommentaare 2 nädalat enne tabelis toodud kuupäeva Majandus- ja Kommunikatsiooniministeeriumi Karl Stern, [email protected]. Eelnõude terviktekstid ja info EVS Teabekeskusest Signe Ruut tel 605 5062, faks 605 5063, [email protected].
WTO SEKRETARIAADILT SAABUNUD SPS TEATISED NUMBER & ESITAMIS-KUUPÄEV
RIIK
M
ÕJU
TATA
V
PIIR
KO
ND
/ R
IIK
TOODE
EESMÄRK
KOMMEN-TAARIDE ESITAMISE VIIMANE KUUPÄEV
G/SPS/N/GTM/41 18. mai 2006
GUATEMALA USA töötlemata lihatooted (0201 ja 0202), sealiha
(0203) ja linnuliha (0207)
toiduohutus/ loomatervis/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
60 päeva
G/SPS/N/CHL/222 29. mai 2006
TŠIILI kõik kaubandus-partnerid
kuivatatud taimedest tooted
taimekaitse -
G/SPS/N/CHL/223 29. mai 2006
TŠIILI kõik kaubandus-partnerid
saematerjal taimekaitse -
3
G/SPS/N/CHL/224 29. mai 2006
TŠIILI kõik kaubandus-partnerid
munad ja ühepäevased
tibud
loomatervis -
G/SPS/N/COL/113 29. mai 2006
KOLUMBIA USA lindude geneetiline
materjal (ühepäevased
tibud), haudemunad,
eluslinnud
toiduohutus -
G/SPS/N/CRI/45 1. juuni 2006
COSTA RICA kaubandus-partnerid
muudatused seadusandluses
toiduohutus/ loomatervis/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
60 päeva
G/SPS/N/NZL/352 2. juuni 2006
UUS MEREMAA Vanuatu papaia (Carica papayae)
taimekaitse -
G/SPS/N/PHL/108 2. juuni 2006
FILIPIINID Elevandiluu-rannik
linnud, linnuliha, ühepäevased tibud, munad
loomatervis -
G/SPS/N/USA/1322 2. juuni 2006
USA kõik kaubandus-partnerid
vürtsid, kakao (oad ja pulber),
pähklid, kosmeetika,
kummi, metallid, pakendid, ravimid
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/COL/114 6. juuni 2006
KOLUMBIA kaubandus-partnerid
krevetid ja kalad toiduohutus 60 päeva
G/SPS/N/COL/115 6. juuni 2006
KOLUMBIA kaubandus-partnerid
veeloomad loomatervis 60 päeva
G/SPS/N/NZL/353 6. juuni 2006
UUS MEREMAA Austraalia banaanid (Musa spp.)
taimekaitse -
G/SPS/N/JPN/163 7. juuni 2006
JAAPAN kõik riigid veiseliha (HS: 02.01, 02.02, 02.04, 02.05, 02.06, 02.07,
02.09 and 02.10) piimatooted (HS: 04.01 ja 04.07) juurvili (HS: 07.01, 07.02, 07.04, 07.05,
07.07 and 07.09) puuvili (HS: 08.07, 08.08,
08.09 ja 08.10) tee, mate ja vürtsid (HS:
09.02) õliseemned ja and õliviljad;
teravili, seemned (HS: 12.07)
toiduohutus 16. august 2006
4
G/SPS/N/THA/150 7. juuni 2006
TAI kõik riigid piimasaadused (ICS 67.100)
toiduohutus 60 päeva
G/SPS/N/USA/ 1323, 1324
7. juuni 2006
USA kõik kaubandus-partnerid
teravili toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/USA/1325 7. juuni 2006
USA kõik kaubandus-partnerid
erinevad toidukaubad
toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/CHL/225 9. juuni 2006
TŠIILI kõik riigid In vitro materjal taimekaitse 7. juuli 2006
G/SPS/N/CHN/97 9. juuni 2006
HIINA kaubandus-partnerid
taimed ja taimetooted
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
1. august 2006
G/SPS/N/IND/40 9. juuni 2006
INDIA kõik kaubandus-partnerid
puuvili, töödeldud toitu
sisaldada võivad toiduained
toiduohutus 18. juuli 2006
G/SPS/N/KOR/ 206 - 207
9. juuni 2006
KOREA VABARIIK
kõik kaubandus-partnerid
dieetlisandid toiduohutus 31. juuli 2006
G/SPS/N/KOR/208 9. juuni 2006
KOREA VABARIIK
kõik kaubandus-partnerid
toidulisandid toiduohutus 31. juuli 2006
G/SPS/N/BRA/183 13. juuni 2006
BRASIILIA kõik riigid melon toiduohutus -
G/SPS/N/BRA/184 13. juuni 2006
BRASIILIA kõik riigid teravili ja teraviljatooted
toiduohutus 25. juuli 2006
G/SPS/N/BRA/185 14. juuni 2006
BRASIILIA kõik riigid sojaoad toiduohutus -
G/SPS/N/USA/1326 14. juuni 2006
USA kõik kaubandus-partnerid
P- Chlorophenoxya
cetic acid, Glyphosate,
Difenzoquat, and Hexazinone
toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
5
G/SPS/N/USA/1327 14. juuni 2006
USA kõik kaubandus-partnerid
brokoli, lillkapsas, baklažaan,
melon, pipar, ananass,
maasikad, asparaagus, salat, sibulad, ingver,
juurikad
toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
31. juuli 2006
G/SPS/N/USA/1328 14. juuni 2006
USA kõik kaubandus-partnerid
puu- ja juurvili toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
26. juuli 2006
G/SPS/N/USA/1329 14. juuni 2006
USA kõik kaubandus-partnerid
tomat ja kõrvits toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
30. oktoober 2006
G/SPS/N/USA/1330 14. juuni 2006
USA kõik kaubandus-partnerid
hommikusöögi-helbed,
maiustused ja tarretis-
magustoidud, kompvekid,
närimiskumm
toiduohutus/ loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/COL/116 15. juuni 2006
KOLUMBIA USA töödeldud veiselihatooted
toiduohutus -
G/SPS/N/NZL/354 16. juuni 2006
UUS MEREMAA kõik kaubandus-partnerid
loomatervise ja taimekaitsega seotud tooted
loomatervis/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/USA/1331 16. juuni 2006
USA kõik kaubandus-partnerid
juurvili toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
6
G/SPS/N/USA/1332 16. juuni 2006
USA kõik kaubandus-partnerid
sarapuupähklid toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
G/SPS/N/USA/1333 16. juuni 2006
USA kõik kaubandus-partnerid
nisu, oder, kaer toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/USA/1334 16. juuni 2006
USA kõik kaubandus-partnerid
erinevad toidukaunad
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/USA/1335 16. juuni 2006
USA kõik kaubandus-partnerid
raudtsitraat toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/IDN/28 20. juuni 2006
INDONEESIA kõik riigid kõik kalahaigused ja
kahjureid sisaldada võiv kasvukeskkond
loomatervis -
G/SPS/N/JOR/17 20. juuni 2006
JORDAANIA linnugripi kahtlusega
riigid
liha ja lihatooted toiduohutus/ loomatervis
-
G/SPS/N/TPKM/86 20. juuni 2006
TAIWANI, PENGHU,
KINMENI JA MATSU ERALDI
TOLLI-TERRITOORIUM
- okassiga loomatervis 25. juuli 2006
G/SPS/N/USA/1336 20. juuni 2006
USA kõik kaubandus-partnerid
rotenoon toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
7
G/SPS/N/USA/1337 20. juuni 2006
USA kõik kaubandus-partnerid
Tephriditae kärbeste kontroll
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
G/SPS/N/USA/1338 20. juuni 2006
USA kõik kaubandus-partnerid
noored kõrvitsataimed,
kurgid, kantaluup,
arbuus, melon, kabatšokk,
kõrvits, tsukiini
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
G/SPS/N/USA/1339 20. juuni 2006
USA kõik kaubandus-partnerid
toiduga kokkupuutuvad
pinnad
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
7. august 2006
G/SPS/N/USA/1340 20. juuni 2006
USA kõik kaubandus-partnerid
mandlid, õunad, marjad,
paljundus-materjal,
petersell, pirnid, pistaatsiapähklid, kreeka pähklid,
virsikud, nektariinid, aprikoosid, ploomid ja viinamarjad
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
8. august 2006
G/SPS/N/ARE/21 22. juuni 2006
ARAABIA ÜHEND-
EMIRAADID
Taani linnud loomatervis/ inimeste
kaitsmine looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/KOR/209 22. juuni 2006
KOREA VABARIIK
kõik kaubandus-partnerid
toit, toidulisandid,
pakkimismasinad ja toidu
pakkematerjal
toiduohutus 60 päeva
G/SPS/N/TPKM/87 22. juuni 2006
TAIWANI, PENGHU,
KINMENI JA MATSU ERALDI
TOLLI-TERRITOORIUM
Prantsuse Polüneesia,
Lesoto, Lõuna-Aafrika,
Svaasimaa, Kanada,
Mehhiko, USA
Xylella fastidiosa peremeestaim
taimekaitse 16. august 2006
G/SPS/N/CAN/266 23. juuni 2006
KANADA - Glucose oxidase enzyme
(ICS: 67.060, 67.120, 67.160)
toiduohutus -
8
G/SPS/N/ROU/10 23. juuni 2006
RUMEENIA Iraan pistaatsia (HS 0802 50 00);
röstitud pistaatsiapähklid (HS 2008 19 13 ja 2008 19 93)
toiduohutus/ inimeste
kaitsmine looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/ROU/11 23. juuni 2006
RUMEENIA kõik riigid kuivatatud või purustatud genus Capsicum viljad, (HS 0904 20 90), karripulber (HS
0910 50), purustatud või
kuivatatud kurkum
(HS 0910 30), palmiõli (HS 1511 10 90)
toiduohutus/ inimeste
kaitsmine looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/ROU/ 12 - 14
23. juuni 2006
RUMEENIA kõik riigid värske linnuliha – 1601, 1602
toiduohutus/ loomatervis/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
-
G/SPS/N/USA/1341 23. juuni 2006
USA kõik kaubandus-partnerid
bioloogilised näriliste
tõrjevahendid
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. august 2006
G/SPS/N/USA/1342 23. juuni 2006
USA kõik kaubandus-partnerid
riis, nisu, rukis, suhkruroog,
melon, viinamarjad ja
kõrvits
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. august 2006
G/SPS/N/USA/1343 23. juuni 2006
USA kõik kaubandus-partnerid
viinamarjad, rosinad, juurvili
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. juuli 2006
G/SPS/N/USA/1344 23. juuni 2006
USA kõik kaubandus-partnerid
juurviljad toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. juuli 2006
9
G/SPS/N/USA/1345 23. juuni 2006
USA kõik kaubandus-partnerid
puuvili toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. juuli 2006
G/SPS/N/USA/1346 23. juuni 2006
USA kõik kaubandus-partnerid
sibul, porrulauk; šalottlauk, maasikad
toiduohutus/ taimekaitse/
inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
14. juuli 2006
G/SPS/N/USA/1347 23. juuni 2006
USA kõik kaubandus-partnerid
glütseroolestrid toiduohutus
-
G/SPS/N/KOR/210 27. juuni 2006
KOREA VABARIIK
kõik riigid GMO-tooted inimeste kaitsmine
looma-/taime-
haiguste või kahjurite eest
20. august 2006
G/SPS/N/KOR/211 27. juuni 2006
KOREA VABARIIK
kõik riigid tervisetooted toiduohutus 60 päeva
WTO SEKRETARIAADILT SAABUNUD TBT TEATISED
NUMBER & ESITAMIS-KUUPÄEV
RIIK
TOODE/KAUP/ TEENUS
EESMÄRK
KOMMEN-TAARIDE ESITAMISE VIIMANE KUUPÄEV
G/TBT/N/CRI/42 9. mai 2006
COSTA RICA kinnispakkide märgistamine
tervisekaitse ja tarbijaeksituste
vältimine
-
G/TBT/N/PER/14 9. mai 2006
PERUU ravimid inimeste tervise kaitse
27. juuli 2006
G/TBT/N/DOM/23 17. mai 2006
DOMINIKAAN kalad ja koorikloomad toiduohutus - nõuded -
G/TBT/N/DOM/24 17. mai 2006
DOMINIKAAN jäätis toiduohutus - nõuded -
G/TBT/N/DOM/25 17. mai 2006
DOMINIKAAN mahetoit toiduohutus - nõuded -
G/TBT/N/DOM/26 17. mai 2006
DOMINIKAAN liha ja lihatooted – chorizo (sealihast
kaste)
miinimumnõuded -
G/TBT/N/DOM/27 17. mai 2006
DOMINIKAAN tuunikalakonservid toiduohutus - nõuded -
10
G/TBT/N/DOM/28 18. mai 2006
DOMINIKAAN lõhekonservid toiduohutus - nõuded -
G/TBT/N/DOM/29 18. mai 2006
DOMINIKAAN maniokk toiduohutus - nõuded -
G/TBT/N/DOM/30 18. mai 2006
DOMINIKAAN külmutatud kalapulgad toiduohutus - nõuded -
G/TBT/N/DOM/31 18. mai 2006
DOMINIKAAN merikogerlaste-konservid
toiduohutus - nõuded -
G/TBT/N/CRI/43 24. mai 2006
COSTA RICA kinnispakkide märgistamine
tarbijapettuste ennetamine ja
inimeste elu ja tervise kaitse
-
G/TBT/N/CHL/52 29. mai 2006
TŠIILI elastomeermaterjalid tarbijaohutus 28. juuli 2006
G/TBT/N/COL/78 29. mai 2006
KOLUMBIA kaupade pakkematerjal, plastik; puust
pakkekastid ja karbid, paberist ja papist kotid,
(3923.00.00, 4415.00.00,
4817.00.00, 4819.00.00 ja 6305.00.00)
taimekaitse ja tarbijaeksituste
vältimine
23. august 2006
G/TBT/N/EEC/110 2. juuni 2006
EUROOPA ÜHENDUSED
veeorganismid, kaasa arvatud kalad,
koorikloomad ja veetaimed
muudatus seadusandluses
60 päeva
G/TBT/N/USA/193 2. juuni 2006
USA anorgaaniline bromiid (HS : 3808;
ICS: 13)
inimeste tervise ja keskkonnakaitse
31. juuli 2006
G/TBT/N/GBR/14 7. juuni 2006
ÜHENDATUD KUNINGRIIK
pudelivesi nõuded 4. august 2006
G/TBT/N/SWE/67 7. juuni 2006
ROOTSI raadiosaatjad (87,5 - 108 MHz),
nõuded 18. august 2006
G/TBT/N/USA/194 7. juuni 2006
USA kütus ja kütuselisandid (HS: 2710; ICS: 13).
keskkonnakaitse 3. juuli 2006
G/TBT/N/ARG/197 12. juuni 2006
ARGENTIINA kinnispakis toidud ja hügieeni- ja
puhastusvahendid
Consolidation of laws 4. august 2006
G/TBT/N/ARG/198 12. juuni 2006
ARGENTIINA tikud ja hambatikud tarbijakaitse 4. august 2006
G/TBT/N/CHN/ 210, 211
12. juuni 2006
HIINA uued keemilised ained inimeste tervise ja keskkonnakaitse
60 päeva
G/TBT/N/CAN/ 160 - 162
14. juuni 2006
KANADA retseptiravimid (ICS: 11.120)
inimeste tervise kaitse
13. august 2006
G/TBT/N/EST/2 14. juuni 2006
EESTI alkoholi märgistamine illegaalse alkoholimüügi
vältimine
60 päeva
G/TBT/N/IND/18 14. juuni 2006
INDIA pakendatud kaubad, välja arvatud ravimid
tarbijakaitse 25. juuli 2006
G/TBT/N/KEN/27 14. juuni 2006
KEENIA kasutatud tekstiiltooted (ICS: 59.080.01;
61.020)
tarbijakaitse 60 päeva
11
G/TBT/N/KEN/28 14. juuni 2006
KEENIA kirurgilised sidemed (ICS: 59.080.30;
HS: 30.05)
tarbijaohutus ja pettuste ennetamine
60 päeva
G/TBT/N/KEN/ 29 - 33
14. juuni 2006
KEENIA vedelgaas (HS: 73.11 ja 76.13;
ICS: 23.020.30)
inimeste elu ja tervise kaitse;
keskkonnakaitse
60 päeva
G/TBT/N/KEN/34 14. juuni 2006
KEENIA pastakad ja nende täitesüdamikud
(HS: 960810, 5411; ICS: 97.180)
tarbijaohutus ja pettuste ennetamine
60 päeva
G/TBT/N/KEN/ 35 - 36
14. juuni 2006
KEENIA energiajoogid (HS: 220.290;
ICS; 67.160/01)
tarbijaohutus ja pettuste ennetamine
60 päeva
G/TBT/N/KEN/37 14. juuni 2006
KEENIA toidu lisaained (ICS: 67.220.20)
tarbijaohutus 60 päeva
G/TBT/N/KEN/ 38 - 39
14. juuni 2006
KEENIA hommikuhelbed (CN: 1901;
HS: 110329; ICS: 67.060)
rahva tervise kaitse 60 päeva
G/TBT/N/EEC/111 15. juuni 2006
EUROOPA ÜHENDUSED
Pinus radiata seemned eriluba Hispaaniale lubada Uus Meremaalt
imporditud seeme turule hoolimata et ei
vasta Direktiivi 1999/105/EÜ
nõuetele
15 päeva
G/TBT/N/NZL/27 15. juuni 2006
UUS MEREMAA Medicago sativa (harilik lutsern)
külviseeme
Proposed measures to prevent the
importation of genetically modified
Medicago sativa (alfalfa, lucerne) seed
into New Zealand
8. august 2006
G/TBT/N/SWE/68 15. juuni 2006
ROOTSI tõsteseadmed seaduse kaasajastamine
27. august 2006
G/TBT/N/SWE/69 15. juuni 2006
ROOTSI korvid, kraanad ja veoautod, mida
kasutatakse ajutiselt inimese tõstmiseks
tehnilised nõuded 27. august 2006
G/TBT/N/SWE/70 15. juuni 2006
ROOTSI töövahendid (Direktiiv
89/665/EMÜ)
nõuded 27. august 2006
G/TBT/N/USA/195 15. juuni 2006
USA kasvuhoonetomatid (HS: 0803 );
(ICS: 67)
tarbijakaitse 31. juuli 2006
G/TBT/N/USA/196 15. juuni 2006
USA sisepõlemismootorid (HS: 8408); (ICS: 13).
keskkonnakaitse 11. september 2006
G/TBT/N/IND/19 16. juuni 2006
INDIA meditsiiniseadmed nõuded impordile ja tootmisele
-
G/TBT/N/NLD/69 20. juuni 2006
UUS MEREMAA konserveeritud hapukapsad ja seened
tarbijakaitse 1. september 2006
G/TBT/N/KOR/111 22. juuni 2006
KOREA VABARIIK
toit, toidulisandid, toidutöötlemismasinad,
pakkemasinad ja toidunõud
tagada tarbijate õigus infole ja vabale
valikule
60 päeva
12
G/TBT/N/CAN/163 23. juuni 2006
KANADA toksilised ained (ICS: 13.020)
inimeste tervise ja keskkonnakaitse
16. august 2006
G/TBT/N/USA/197 23. juuni 2006
USA laeventilaatorid (HS: 8414; ICS: 13)
tarbijakaitse 8. september 2006
G/TBT/N/ARM/32 26. juuni 2006
ARMEENIA toidu transportimisel saatedokumentides
kasutatavad sümbolid ja märgid
nõuded 10. august 2006
G/TBT/N/ARM/33 26. juuni 2006
ARMEENIA jalanõumaterjalid nõuded 10. august 2006
G/TBT/N/ARM/34 26. juuni 2006
ARMEENIA tekstiilkiududest valmistatud töötlemata
tooted
märgistusnõuded 10. august 2006
G/TBT/N/JPN/174 26. juuni 2006
JAAPAN mahepõllumajandus-tooted
maitselisandite määratlemine
3. august 2006
G/TBT/N/JPN/175 26. juuni 2006
JAAPAN töödeldud mahetoit muudatused seadusandluses
21. august 2006
G/TBT/N/KOR/112 26. juuni 2006
KOREA VABARIIK
ravimid inimeste tervise kaitse
60 päeva
G/TBT/N/EEC/112 28. juuni 2006
EUROOPA ÜHENDUSED
meditsiiniseadmed olemasoleva seadusandluse uuendamine
90 päeva
13
UUED STANDARDID JA KAVANDID ARVAMUSKÜSITLUSEKS
EVS Teataja avaldab andmed uutest vastuvõetud Eesti standarditest ja avalikuks arvamusküsitluseks esitatud standardite kavanditest rahvusvahelise standardite klassi-fikaatori (ICS) järgi. Samas jaotises on toodud andmed nii eesti keeles avaldatud, kui ka jõustumisteatega Eesti standarditeks inglis-keelsetena vastuvõetud rahvusvahelistest ja Euroopa standarditest. Eesmärgiga tagada standardite vastuvõtmine järgides konsensuse põhimõtteid, peab standardite vastuvõtmisele eelnema standardite kavandite avalik arvamusküsitlus, milleks ettenähtud perioodi jooksul (reeglina 2 kuud) on asjast huvitatuil võimalik tutvuda standardite kavanditega, esitada kommentaare ning teha ettepanekuid parandusteks. Arvamusküsitlusele on esitatud: 1. Euroopa ja rahvusvahelised standardid
ning standardikavandid, mis on kavas vastu võtta Eesti standarditeks jõustumisteatega. Kavandid on kättesaadavad reeglina inglise keeles EVS klienditeeninduses ning standardiosakonnas. EVS tehnilistel komiteedel on võimalik saada koopiaid oma käsitlusalaga kokkulangevatest standardite kavanditest EVS kontaktisiku kaudu.
2. Eesti algupäraste standardite kavandid, mis
Eesti standardimisprogrammi järgi on jõudnud arvamusküsitluse etappi. Kavanditega saab tutvuda ning neid osta
Eesti Standardikeskuse klienditeeninduses [email protected]
Arvamusküsitlusel olevate dokumentide loetelus on esitatud järgnev informatsioon standardikavandi või standardi kohta:
• Tähis (eesliide pr Euroopa ja DIS rahvusvahelise kavandi puhul)
• Viide identsele Euroopa või rahvusvahelisele dokumendile
• Arvamusküsitluse lõppkuupäev (arvamuste esitamise tähtaeg)
• Pealkiri • Käsitlusala • Keelsus (en=inglise; et=eesti)
Kavandite arvamusküsitlusel on eriti oodatud teave kui rahvusvahelist või Euroopa standardit ei peaks vastu võtma Eesti standardiks (vastuolu Eesti õigusaktidega, pole Eestis rakendatav jt põhjustel). Soovitame arvamusküsitlusele pandud standarditega tutvuda igakuiselt kasutades EVS infoteenust või EVS Teatajat. Kui see ei ole võimalik, siis alati viimase kahe kuu nimekirjadega kodulehel ja EVS Teatajas, kuna sellisel juhul saate info kõigist hetkel kommenteerimisel olevatest kavanditest. Vastavad vormid arvamuse avaldamiseks Euroopa ja rahvusvaheliste standardikavandite ning algupäraste Eesti standardikavandite kohta leiate EVS koduleheküljelt www.evs.ee .
14
ICS PÕHIRÜHMAD ICS Nimetus 01 Üldküsimused. Terminoloogia. Standardimine. Dokumentatsioon 03 Teenused. Ettevõtte organiseerimine, juhtimine ja kvaliteet. Haldus. Transport.
Sotsioloogia 07 Matemaatika. Loodusteadused 11 Tervisehooldus 13 Keskkonna- ja tervisekaitse. Ohutus 17 Metroloogia ja mõõtmine. Füüsikalised nähtused. 19 Katsetamine 21 Üldkasutatavad masinad ja nende osad 23 Üldkasutatavad hüdro- ja pneumosüsteemid ja nende osad 25 Tootmistehnoloogia 27 Elektri- ja soojusenergeetika 29 Elektrotehnika 31 Elektroonika 33 Sidetehnika 35 Infotehnoloogia. Kontoriseadmed 37 Visuaaltehnika 39 Täppismehaanika. Juveelitooted 43 Maanteesõidukite ehitus 45 Raudteetehnika 47 Laevaehitus ja mereehitised 49 Õhusõidukid ja kosmosetehnika 53 Tõste- ja teisaldusseadmed 55 Pakendamine ja kaupade jaotussüsteemid 59 Tekstiili- ja nahatehnoloogia 61 Rõivatööstus 65 Põllumajandus 67 Toiduainete tehnoloogia 71 Keemiline tehnoloogia 73 Mäendus ja maavarad 75 Nafta ja naftatehnoloogia 77 Metallurgia 79 Puidutehnoloogia 81 Klaasi- ja keraamikatööstus 83 Kummi- ja plastitööstus 85 Paberitehnoloogia 87 Värvide ja värvainete tööstus 91 Ehitusmaterjalid ja ehitus 93 Rajatised 95 Sõjatehnika 97 Olme. Meelelahutus. Sport 99 Muud
15
01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOONUUED STANDARDID
CEN/TS 15398:2006
This document establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols.� Resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; � textile floor coverings, excluding loose-laid mats; � laminate floor coverings; � floor panels for loose laying.
Resilient, textile and laminate floor coverings - Floor covering standard symbols
Hind 151,00Identne CEN/TS 15398:2006
Keel enEVS-EN ISO 6165:2006
Standard kehtestab sõnavara ja terminite alluvusjärjestuse (hierarhia), mullatöömasinatele, mis on kavandatud sooritama järgmisi töid: pinnase ja teiste materjalide kaevamine, laadimine, teisaldamine (transport) ning laotamine ja tihendamine (nt teedel ja tammidel, kraavide kaevamisel ja ehitusplatsidel tehtavate tööde käigus).
Mullatöömasinad. Põhitüübid. Sõnavara
Hind 151,00Identne EN ISO 6165:2006ja identne ISO 6165:2006
Keel enAsendab EVS-EN ISO 6165:2003EVS-EN ISO 11145:2006
See rahvusvaheline standard määratleb lasertehnoloogia valdkonnas põhiterminid, sümbolid ja mõõtühikud, et ühtlustada terminoloogiat ja saavutada selged määratlused ja laserikiire parameetrite korduvkatsed ning lasertehnoloogia alusel valmistatud toodangu reprodutseeritavad omadused.
Optika ja optikamõõteriistad. Laserid ja laseriga seonduvad seadmed. Sõnastik ja sümbolid
Hind 180,00Identne EN ISO 11145:2006ja identne ISO 11145:2006
Keel enAsendab EVS-EN ISO 11145:2002
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN ISO 6165:2003
Standard kehtestab sõnavara ja terminite alluvusjärjestuse (hierarhia), mullatöömasinatele, mis on kavandatud sooritama järgmisi töid: pinnase ja teiste materjalide kaevamine, laadimine, teisaldamine (transport) ning laotamine ja tihendamine (nt teedel ja tammidel, kraavide kaevamisel ja ehitusplatsidel tehtavate tööde käigus).
Mullatöömasinad. Põhitüübid. SõnavaraIdentne EN ISO 6165:2002
Keel etAsendab EVS-EN ISO 6165:2000Asendatud EVS-EN ISO 6165:2006
EVS-EN ISO 11145:2002
See rahvusvaheline standard määratleb lasertehnoloogia valdkonnas põhiterminid, sümbolid ja mõõtühikud, et ühtlustada terminoloogiat ja saavutada selged määratlused ja laserikiire parameetrite korduvkatsed ning lasertehnoloogia alusel valmistatud toodangu reprodutseeritavad omadused.
Optika ja optikamõõteriistad. Laserid ja laseriga seonduvad seadmed. Sõnastik ja sümbolid
Identne EN ISO 11145:2001ja identne ISO 11145:2001
Keel enAsendab EVS-EN ISO 11145:1999Asendatud EVS-EN ISO 11145:2006
KAVANDITE ARVAMUSKÜSITLUS
IEC 60050(191):2006/A1
Amendment 1 - International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990/A1:1999
Keel en
Tähtaeg 29.08.2006
IEC 60050(191):2006/A2
Amendment 2 - International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990/A2:2002
Keel en
Tähtaeg 29.08.2006
IEC 60050(191)
Replaces 271 (A-C).
International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990
Keel en
Tähtaeg 29.08.2006
IEC 60050-826
IEC 60050 osa 826 käsitleb selliseid elektripaigaldisi, mida kasutatakse nt elamutes, tööstus- ja äriettevõtetes. See ei käsitle avalikke energiajaotussüsteeme ega elektrienergia tootmist ega edastamist nendes süsteemides.
Rahvusvaheline elektrotehnika sõnastik. Osa 826: Elektripaigaldised
ja identne IEC 60050-826:2004
Keel en
Tähtaeg 8.04.2006
prEN 15221-1
This European standard gives relevant terms and definitions in the area of Facility Management. It also provides insight into the scope of Facility Management.
Facility Management - Part 1: Terms and definitions
Identne prEN 15221-1:2006
Keel en
Tähtaeg 29.08.2006
16
prEN 15529 rev
This European Standard defines the principal terms concerning derivatives from coal pyrolysis.
Derivatives from coal pyrolysis - Terminology
Identne prEN 15529:2006
Keel enAsendab EVS-EN 12302:2000; EVS-EN 12303:2000; EVS-EN 13847:2001
Tähtaeg 29.08.2006
03 TEENUSED. ETTEVÕTTE ORGANISEERIMINE, JUHTIMINE JA KVALITEET. HALDUS. TRANSPORT. SOTSIOLOOGIAUUED STANDARDID
CEN ISO/TS 18234-1:2006
This Technical Specification provides an introduction and index to the initial set of TPEG applications and specifications. It allows the indexing of new applications as they are added to the TPEG applications family, by defining their Application Identification (AID).
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 1: Introduction, Numbering and Versions
Hind 104,00Identne CEN ISO/TS 18234-1:2006ja identne ISO/TS 18234-1:2006
Keel enCEN ISO/TS 18234-2:2006
This Technical Specification establishes the method of referencing used within a TPEG data-stream to allow a service provider to signal availability of the same service on another bearer channel or similar service data from another service.
Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF)
Hind 199,00Identne CEN ISO/TS 18234-2:2006ja identne ISO/TS 18234-2:2006
Keel enCEN ISO/TS 18234-3:2006
This Technical Specification establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery of information about the availability of the same service on another bearer channel or similar service data from another service provider, directly from service provider to end-users.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application
Hind 199,00Identne CEN ISO/TS 18234-3:2006ja identne ISO/TS 18234-3:2006
Keel en
CEN ISO/TS 18234-4:2006
This document establishes the method of delivering Road Traffic Messages within a TPEG service. The TPEG-RTM application is designed to allow the efficient and language independent delivery of road information directly from service provider to end-users. The information provided relates to event and some status information on the road network and on associated infrastructure affecting a road journey. For example, limited information about abnormal operation of links in the network may be included, such as ferries, liftingbridges,etc.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 4: Road Traffic Message (RTM) application
Hind 305,00Identne CEN ISO/TS 18234-4:2006ja identne ISO/TS 18234-4:2006
Keel enCEN ISO/TS 18234-5:2006
This Technical Specification describes the Public Transport Information (PTI) Application, which is intended to cover all modes of public (i.e. collective) transport as well as inter-urban and intra-urban travel. The application is designed to allow the efficient and language independent delivery of public transport information directly from service provider to end-users.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application
Hind 246,00Identne CEN ISO/TS 18234-5:2006ja identne ISO/TS 18234-5:2006
Keel enCEN ISO/TS 18234-6:2006
This Technical Specification establishes the method of location referencing used by TPEG applications such as TPEG-RTM or TPEG-PTI. TPEG applications are specified to contain all the information required by a client TPEG decoder (i.e. Both location referencing and event information), to present all the information intended for the end-user when it was originated by the service provider.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 6: Location referencing applications
Hind 286,00Identne CEN ISO/TS 18234-6:2006ja identne ISO/TS 18234-6:2006
Keel enEVS-EN 15038:2006
This European Standard specifies the requirements for the translation service provider (TSP) with regard to human and technical resources, quality and project management, the contractual framework, and service procedures. This standard does not apply to interpreting services.
Translation services - Service requirements
Hind 132,00Identne EN 15038:2006
Keel en
17
EVS-IEC 60319:2006
Describes the information needed for characterizing reliability of a component, and also the detailed requirements for reporting reliability data. Gives guidance to component users as to how they should specify their reliability requirements to component manufacturers. The data, derived from laboratory tests, should enable circuit and equipment designers to evaluate the reliability of circuits and systems.
Presentation and specification of reliability data for electronic components
Hind 141,00ja identne IEC 60319:1999
Keel enEVS-IEC 60605-2:2006
It applies to the design of operating and environmental test cycles referred to in 8.1 and 8.2 of IEC 605-1.
Equipment reliability testing - Part 2: Design of test cycles
Hind 171,00ja identne IEC 60605-2:1994
Keel enEVS-IEC 60605-4:2006
Provides statistical methods for evaluating point estimates, confidence intervals, prediction intervals and tolerance intervals for the failure rate of items whose time to failure follows an exponential distribution.
Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
Hind 190,00ja identne IEC 60605-4+A1:2001
Keel enEVS-IEC 60605-6:2006
Specifies procedures to verify the assumption of a constant failure rate or constant failure intensity as defined in IEC 60050(191). These procedures are applicable whenever it is necessary to verify these assumptions. This may be due to a requirement or for the purpose of assessing the behaviour in time of the failure rate or the failure intensity.
Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions
Hind 123,00ja identne IEC 60605-6:1997+AC:2000
Keel enEVS-IEC 60605-3-1:2006
Applies to indoor portable equipment operated in a stationary position with a low degree of simulation. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Indoor portable equipment - Low degree of simulation
Hind 95,00ja identne IEC 60605-3-1:1986
Keel en
EVS-IEC 60605-3-2:2006
Applies to equipment for stationary use in weatherprotected locations and in temperate climates. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Equipment for stationary use in weatherprotected locations - High degree of simulation
Hind 104,00ja identne IEC 60605-3-2:1986
Keel enEVS-IEC 60605-3-4:2006
This section is applicable to portable equipment for non-stationary use covered by IEC 60721-3-7. The degree of simulation is low. Contains preferred test conditions as given in IEC 60605-1. During exposure to the test conditions, the test items should be monitored according to 9.1 of IEC 60605-1. The test cycle provided here is not intended to replace tests for other purposes, such as qualification tests, functional performance tests, environmental tests and tests aiming at the verification of the ability to survive or function during extreme conditions of storage, transportation or use.
Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
Hind 132,00ja identne IEC 60605-3-4:1992
Keel enEVS-IEC 60706-1:2006
Describes the concept of maintainability, defines the general approach and gives the objectives of maintainability. Gives the maintainability requirements for specifications and contracts and describes the contents of maintainability programmes. Sections 1 and 3 are replaced by IEC 60300-3-10 (2000).
Guide on maintainability of equipment. Part 1 - Sections One, Two and Three. Introduction, requirements and maintainability programme
Hind 141,00ja identne IEC 60706-1:1982
Keel enEVS-IEC 61070:2006
Specifies techniques for availability performance testing of frequently maintained items when the availability performance measure used is either steady-state availability or steady-state unavailability. Applies to compliance testing of the steady-state availability.
Compliance test procedures for steady-state availability
Hind 162,00ja identne IEC 61070:1991
Keel enEVS-IEC 61123:2006
Specifies procedures for applying and preparing compliance test plans for success ratio or failure ratio. The procedures are based on the assumption that each trial is statistically independent. Supersedes IEC 605-5 and its amendment 1.
Reliability testing - Compliance test plans for success ratio
Hind 180,00ja identne IEC 61123:1991
Keel en
18
KAVANDITE ARVAMUSKÜSITLUS
IEC 60706-6
It specifies techniques covering some quantitative aspects of maintainability engineering in various phases of the system life cycle, and is applicable to the tasks of maintainabily demonstration and maintainability data evaluation.
Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation
ja identne IEC 60706-6:1994
Keel en
Tähtaeg 29.08.2006
prCEN/TR 15524
This technical report consists of three parts. The first part defines, describes and explains basic concepts typical to all mail ommunication systems such as domains, parties, agents and their role in the system, physical and informational objects, processes, interfaces and relationships.
Postal services - Customer-directed information including track and trace - General concepts and definitions
Identne prCEN/TR 15524 :2006
Keel en
Tähtaeg 29.08.2006
prCEN/TS 15523
This document specifies a methodology that allows postal operators to define specific statements of mailing submission customised according to their environment and applications.
Postal service - Statement of mailing submission
Identne prCEN/TS 15523:2006
Keel en
Tähtaeg 29.08.2006
prCEN/TS 15525
This document specifies the electrical, data and timing interface between the control unit of a postal sorting system and an ink jet printer connected to that system. It further specifies an ancillary interface to the printer, which can be used for the support of remote diagnostics and other service functions.
Postal Services - Standard Interfaces - Interface between Machine Control and Bar Code Printers
Identne prCEN/TS 15525:2006
Keel en
Tähtaeg 29.08.2006
prEN 15221-1
This European standard gives relevant terms and definitions in the area of Facility Management. It also provides insight into the scope of Facility Management.
Facility Management - Part 1: Terms and definitions
Identne prEN 15221-1:2006
Keel en
Tähtaeg 29.08.2006
prEN 15221-2
This European standard provides guidance on the preparation of agreements for Facility Management work.This European standard is applicable to: – Facility Management agreements for both public and private European Union cross-border, as well as domestic, client/Facility Management service provider relationships; – full range of facility services; – both types of Facility Management service providers (internal and external); – all types of working environments (e.g. industrial, commercial, administration, military, health etc.).
Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
Identne prEN 15221-2:2006
Keel en
Tähtaeg 29.08.2006
prEN 60706-3
This part of IEC 60706 describes the various aspects of verification necessary to ensure that the specified maintainability requirements of an item have been met and provides suitable procedures and test methods. This standard also addresses the collection, analysis and presentation of maintainability related data, which may be required during, and at the completion of, design and during item production and operation.
Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data
Identne IEC 60706-3:200Xja identne prEN 60706-3:2006
Keel en
Tähtaeg 29.08.2006
prEN 60706-5
This guide has for purpose to provide guidance for the early consideration of testability aspects in design and development, and to assist in determining effective test procedures as an integral part of operation and maintenance.
Guide on maintainability of equipment - Part 5: Section 4: Diagnostic testing
Identne prEN 60706-5:2005ja identne IEC 60706-5:200X
Keel en
Tähtaeg 29.08.2006
prEN 61025
Defines basic principles, provides the steps necessary to perform an analysis, identifies appropriate assumptions, events and failure modes, and provides identification rules and symbols.
Fault tree analysis (FTA)
Identne prEN 61025:200Xja identne IEC 61025:200X
Keel en
Tähtaeg 29.08.2006
19
prEN 61165
This International Standard provides guidance on the application of Markov techniques to model and analyze a system and estimate reliability, availability, maintainability and safety measures. This standard is applicable to all industries where systems, which exhibit state-dependent behaviour, have to be analyzed. The Markov techniques covered by this standard assume constant time-independent state transition rates. Such techniques are often called homogeneous Markov techniques.
Application of Markov techniques
Identne prEN 61165:2006ja identne IEC 61165:2006
Keel en
Tähtaeg 29.08.2006
07 MATEMAATIKA. LOODUSTEADUSEDKAVANDITE ARVAMUSKÜSITLUS
prEN ISO 8261
This International Standard describes general guidelines for the preparation of test samples, initial suspensions and decimal dilutions for the microbiological examination of milk and milk products, including milk-based infant foods.
Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
Identne prEN ISO 8261:2006ja identne ISO/DIS 8261:2006
Keel en
Tähtaeg 29.08.2006
11 TERVISEHOOLDUSUUED STANDARDID
EVS-EN 14561:2006
This European Standard specifies a test method and the minimum requirements for bactericidal activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water – or in the case of ready-to-use products – with water.
Keemilised desinfektsioonivahendid ja antiseptikumid. Kvantitatiivne ülekandekatse meditsiini valdkonnas kasutatavate instrumentide bakteritsiidse toime hindamiseks. Katsemeetod ja nõuded (2.faas, 2.etapp)
Hind 199,00Identne EN 14561:2006
Keel en
EVS-EN 14562:2006
This European Standard specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant products for instruments that form a homogeneous, physically stable preparation when diluted with hard water – or in the case of ready-to-use products – with water.
Keemilised desinfektsioonivahendid ja antiseptikumid. Kvantitatiivne ülekandekatse meditsiini valdkonnas kasutatavate instrumentide fungitsiidse või pärmseentevastase toime hindamiseks. Katsemeetod ja nõuded (2.faas, 2.etapp)
Hind 199,00Identne EN 14562:2006
Keel enEVS-EN ISO 7493:2006
This International Standard specifies requirements, recommendations and test methods for the operator’s stool in the dental office as well as requirements for the manufacturer’s instructions for use and for marking and packaging. It also covers recommendations to manufacturers on the design of operator's stools.
Hambaravitöötaja tool
Hind 113,00Identne EN ISO 7493:2006ja identne ISO 7493:2006
Keel enAsendab EVS-EN ISO 7493:2000EVS-EN ISO 11979-3:2006
This part of ISO 11979 specifies requirements and test methods for certain mechanical properties of intraocular lenses (IOLs). It is applicable to all types of IOLs intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular IOL design.
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods
Hind 199,00Identne EN ISO 11979-3:2006ja identne ISO 11979-3:2006
Keel enAsendab EVS-EN 13503-3:2000EVS-EN ISO 11979-7:2006
This part of ISO 11979 specifies particular requirements for clinical investigations for posterior and anterior chamber monofocal intraocular lenses (IOLs) for the correction of aphakia.
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations
Hind 162,00Identne EN ISO 11979-7:2006ja identne ISO 11979-7:2006
Keel enAsendab EVS-EN 13503-7:2002
20
EVS-EN ISO 21171:2006
This International Standard specifies methods for the determination of readily removable powder on the surface of gloves for medical use. Three methods are specified: method A for powdered gloves and methods B and C for powder-free gloves. This International Standard does not address safety issues that may be associated with the presence of powder on gloves nor does it prescribe limits on the amounts that may be present. The applicability of this International Standard to medical gloves not made from rubber has not beenestablished.
Medical gloves - Determination of removable surface powder
Hind 123,00Identne EN ISO 21171:2006ja identne ISO 21171:2006
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 13503-3:2000
This part of EN 13503 specifies requirements and test methods for certain mechanical properties of intraocular lenses (IOLs). It is applicable to all types of intraocular lenses intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular design.
Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods
Identne EN 13503-3:2000ja identne ISO 11979-3:1999
Keel enAsendatud EVS-EN ISO 11979-3:2006EVS-EN 13503-7:2002
This part of EN 13503 specifies particular requirements for clinical investigation protocols for posterior and anterior chamber monofocal intraocular lenses( IOLs) for the correction of aphakia.
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations
Identne EN 13503-7:2001ja identne ISO 11979-7:2001
Keel enAsendatud EVS-EN ISO 11979-7:2006EVS-EN ISO 7493:2000
The standard specifies requirements, recommendations and methods of test for dental operator`s stools as well as requirements for manufacturer`s instructions, marking and packaging. It covers also recommedations for manufacturers on the designs of stools.
Hambaravitöötaja tool
Identne EN ISO 7493:2000ja identne ISO 7493:1997 + Cor. 1:1999
Keel enAsendab EVS-EN 27493:1999Asendatud EVS-EN ISO 7493:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 14476:2005/prA1
This document specifies a test method and the minimum requirements for virucidal activity of chemical disinfectants or antiseptic products for instruments, surfaces or hands that form a homogeneous physically stable preparation when diluted with hard water – or in the case of ready-to-use products – with water.
Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1)
Identne EN 14476:2005/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 60601-2-13:2006/prA1:2006
Specifies particular safety and essential performance requirements for individual devices designed for use in an anaesthetic system as well as specific requirements for the anaesthetic gas delivery system. This standard specifies requirements and defines interfaces for: - individual devices designed for use in an anaesthetic systems(s), and - integrated anaesthetic systems.
Medical electrical equipment Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems
Identne EN 60601-2-13:200X/prA1:2006ja identne EN 60601-2-13:200X/prA1:2006
Keel en
Tähtaeg 29.08.2006
prEN 60601-2-16
This Particular Standard specifies the minumum safety requirements for single patient haemodialysis, haemodiafiltration and haemofiltration equipment (as defined in 2.101). These devices are intended for use either by medical staff or under the supervision of medical expertise, including haemodialysis, haemodiafiltration and haemofiltration equipment operated by the patient.
Elektrilised meditsiiniseadmed. Osa 2-16: Erinõuded vere dialüüsi, vere filtreerimise ja vere filtreerimisseadmestiku ohutusele
Identne prEN 60601-2-16:2006ja identne IEC 60601-2-16:2006
Keel enAsendab EVS-EN 60601-2-16:2001
Tähtaeg 29.08.2006
prEN 60601-2-39
This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of PERITONEAL DIALYSIS ME EQUIPMENT as defined in 201.3.208, hereafter referred to as ME EQUIPMENT. It applies to ME EQUIPMENT intended for use either by medical staff or under the supervision of medical experts, including ME EQUIPMENT operated by the PATIENT, regardless of whether the ME EQUIPMENT is used in a hospital or domestic environment.
Elektrilised meditsiiniseadmed. Osa 2-39: Erinõuded kõhukelmedialüüsiseadmestiku ohutusele
Identne prEN 60601-2-39:2006ja identne IEC 60601-2-39:2006
Keel enAsendab EVS-EN 60601-2-39:2002
Tähtaeg 29.08.2006
21
prEN ISO 7886-4
This part of ISO 7886 specifies requirements for sterile single-use hypodermic syringes made of plastic materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design such that the syringe can be rendered unusable after use.
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature
Identne prEN ISO 7886-4:2006ja identne ISO/FDIS 7886-4:2006
Keel en
Tähtaeg 29.08.2006
13 KESKKONNA- JA TERVISEKAITSE. OHUTUSUUED STANDARDID
CEN/TR 15281:2006
Inerting is a measure to prevent explosions. By feeding inert gas into a system which is to be protected against an explosion, the oxygen content is reduced below a certain concentration until no explosion can occur. The addition of sufficient inert gas to make any mixture non-flammable when mixed with air (absolute inerting) is only required in rare occasions.
Guidance on Inerting for the Prevention of Explosions
Hind 233,00Identne CEN/TR 15281:2006
Keel enCEN/TS 15439:2006
This Technical Specification gives methods for sampling and analysis of tars and particles in order to determine the load of these contaminants in flowing biomass gasification product gases.b
Biomass gasification - Tar and particles in product gases - Sampling and analysis
Hind 208,00Identne CEN/TS 15439:2006
Keel enEVS-EN 250:2000/A1:2006
This European Standard applies to self-contained open-circuit compressed air underwater breathing apparatus and sub-assemblies as described in 4.2.1. The object of the requirements and tests set out in this European Standard is to ensure a minimum level of safe operation for underwater breathing apparatus to a maximum depth of 50 m.
Hingamisvarustus. Avatud tsükliga, väliskeskkonnast isoleeritud, suruõhku kasutav sukeldumisaparaat. Nõuded, katsetamine, märgistus
Hind 62,00Identne EN 250:2000/A1:2006
Keel enEVS-EN 511:2006
This European Standard specifies the requirements and test methods for gloves which protect against convective and conductive cold down to –50 °C. This cold can be linked to the climatic conditions or an industrial activity.
Külma eest kaitsvad kindad
Hind 132,00Identne EN 511:2006
Keel enAsendab EVS-EN 511:1999
EVS-EN 614-1:2006
This European Standard establishes the ergonomic principles to be followed during the process of design of machinery. This European Standard applies to the interactions between operators and machinery when installing, operating, adjusting, maintaining, cleaning, dismantling, repairing or transporting equipment, and outlines the principles to be followed in taking the health, safety and well-being of the operator into account.
Masinate ohutus. Ergonoomia põhimõtted projekteerimisel. Osa 1: Terminoloogia ja üldised põhimõtted
Hind 162,00Identne EN 614-1:2006
Keel enEVS-EN 1366-4:2006
This European Standard specifies a method for determining the fire resistance of linear joint seals based on their intended end use. This European Standard is used in conjunction with EN 1363-1.
Fire resistance tests for service installations - Part 4: Linear joint seals
Hind 190,00Identne EN 1366-4:2006
Keel enEVS-EN 14460:2006
This standard specifies requirements for explosion-pressure-resistant and explosion pressure shock-resistant equipment. This standard is applicable to process vessels and systems. It is not applicable to individual items of equipment such as motors and gearboxes that may be designed to withstand an internal explosion, which is the subject of EN 13463-3.
Plahvatuskindlad seadmed
Hind 132,00Identne EN 14460:2006
Keel enEVS-EN 15058:2006
This European Standard specifies the Standard Reference Method (SRM) for sampling, and determining carbon monoxide content in ducts and stacks emitting to atmosphere. It describes the Non Dispersive Infra-Red (NDIR) analytical technique, including the sampling system and sample gas conditioning system, to determine CO in flue gases. This European Standard is the reference method for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, it is necessary to demonstrate that the performance characteristics of the method are lower than the performance criteria defined in this European standard and that the overall uncertainty of the method is less than ± 6 % relative at the daily Emission Limit Value (ELV).
Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry
Hind 208,00Identne EN 15058:2006
Keel en
22
EVS-EN 15074:2006
This European Standard is applicable to ozone used for treatment of water for swimming pools. It describes the composition of ozone. It gives information on its use in swimming pool water treatment. It also determines the rules relating to safe handling and use (see Annex B).
Chemicals used for treatment of swimming pool water - Ozone
Hind 95,00Identne EN 15074:2006
Keel enEVS-EN 15110:2006
This guidance standard describes general procedures for surveying zooplankton in standing waters for the purposes of water quality assessment and determination of ecological status.
Water quality - Guidance standard for the sampling of zooplankton from standing waters
Hind 151,00Identne EN 15110:2006
Keel enEVS-EN 60335-1:2003/A12:2006
Deals with the safety of electrical appliances for household and similar purposes. It deals with the common hazards presented by appliances that are encountered by all persons in and around the home. It also covers appliances used by laymen in shops, in light industry and on farms (such as catering equipment, and industrial and commercial cleaning appliances). The rated voltage of the appliances are not more than 250 V for single-phase appliances and 480 V for other appliances.
Majapidamis- ja muude taoliste elektriseadmete ohutus. Osa 1: Üldnõuded
Hind 286,00Identne EN 60335-1:2002/A12:2006ja identne IEC 60335-1:2001
Keel enEVS-EN 60335-2-43:2003/A1:2006
Deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. The clothes racks may be fixed or free-standing in a cabinet. The air circulation may be natural or forced. This standard does not apply to tumble dryers (refer to IEC 60335-2-11 for tumble dryers)
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-43: Erinõuded riidekuivatitele ja käteräti-siugtorudele
Hind 62,00Identne EN 60335-2-43:2003/A1:2006ja identne IEC 60335-2-43:2002/A1:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 511:1999
Standard määrab kindlaks nõuded ja testimismeetodid kinnaste jaoks, mis kaitsevad konvektiivse külma või soojusjuhtivusest tingitud külma eest, mis on alla -50 °C. Selline külm võib olla tingitud kliimatingimustest või tööstuslikust tegevusest. Kasutusomaduste erinevaid tasemeid iseloomustavad väärtused on kindlaks määratud iga ohuklassi või spetsiifilise kasutusvaldkonna kohta kehtivate erinõuetega. Tooteid saab antud viisil testida ainult nende ekspluatatsiooniomaduste taseme määramiseks, mitte aga kaitsmisastme määramiseks.
Kaitsekindad külma eestIdentne EN 511:1994
Keel enAsendatud EVS-EN 511:2006
KAVANDITE ARVAMUSKÜSITLUS
CLC/prTS 61111
Applies to insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on a.c. and d.c. installations.
Matting of insulating material for electrical purposes
Identne CLC/prTS 61111:2006ja identne IEC 61111:1992 + A1:2002 + corrigendum May 2000
Keel en
Tähtaeg 29.08.2006
CLC/prTS 61112
Applies to insulating blankets for the protection of workers from accidental contact with live or earthed electrical conductors, apparatus or circuits and avoidance of short circuits on a.c. and d.c. installations.
Blankets of insulating material for electrical purposes
Identne CLC/prTS 61112:2006ja identne IEC 61112:1992 + corr. May 2000 + A1:2002
Keel en
Tähtaeg 29.08.2006
EN 13317:2003/prA1
This European Standard covers the manhole cover assembly and specifies the performance requirements,�dimensions and tests necessary to verify the compliance of the equipment to this standard
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
Identne EN 13317:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 60335-2-2:2003/prA2
Deals with the safety of electric vacuum cleaners and water-suction cleaning appliances. It also applies to motorized cleaning heads and current-carrying hoses for vacuum cleaners. These are for household use, including vacuum cleaners for animal grooming. The rated voltage is less than 250 V. This standard does not cover industrial appliances, nor special conditions such as explosive atmospheres
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-2: Erinõuded tolmuimejatele ja veeimemis-puhastusseadmetele
Identne IEC 60335-2-2:2002/A2:2006ja identne EN 60335-2-2:2003/prA2:2006
Keel en
Tähtaeg 29.08.2006
23
EN 60335-2-17:2003/A1
Deals with the safety of electric blankets, pads and other flexible appliances for heating the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. This standard also deals with the control units supplied with the appliance
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-17: Erinõuded tekkidele, patjadele ja muudele taolistele paindlikele soojendusseadmetele
Identne EN 60335-2-17:2002/A1:2006ja identne IEC 60335-2-17:2002/A1:2006
Keel en
Tähtaeg 29.08.2006
EN 60335-2-95:2005/prA1
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the movement of these electrically driven garage doors is included.
Household and similar electrical appliances – Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
Identne EN 60335-2-95:2004/prA1:2006ja identne IEC 60335-2-95:2002/A1:2004
Keel en
Tähtaeg 29.08.2006
prCEN/TR 15522-1
This document provides guidance on taking and handling samples that are collected as part of an investigation into the likely source of a crude oil or petroleum product spill into a marine or aquatic environment. Guidance is given on taking samples from both the spill and its potential source.
Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling
Identne prCEN/TR 15522-1:2006
Keel en
Tähtaeg 29.08.2006
prCEN/TS 14997
This document specifies a test method for determining the influence of pH on the leachability of inorganic constituents from a waste material. The equilibrium condition as defined in the document is established by continually adjusting the pH by the addition of acid or base to reach desired pH values. This test method produces eluates, which are subsequently characterized physically and chemically.
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control
Identne prCEN/TS 14997:2006
Keel en
Tähtaeg 29.08.2006
prEN 137 rev
Standard laieneb hingamisteede kaitsevahendina kasutatavatele autonoomsetele avatud süsteemiga suruõhu-hingamisaparaatidele, välja arvatud hädaolukorras väljapääsemiseks ja sukeldumiseks ette nähtud aparaadid. See esitab üksikasjalised miinimumnõuded autonoomsetele avatud süsteemiga suruõhu-hingamisaparaatidele.
Hingamisteede kaitsevahendid. Autonoomne avatud süsteemiga suruõhu-hingamisaparaat. Nõuded, katsetamine, märgistus
Identne prEN 137:2006
Keel etAsendab EVS-EN 137:2003
Tähtaeg 29.08.2006
prEN 354 rev
This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in personal fall protection systems.
Kõrgelt kukkumise isikukaitsevahendid. Trosstalrepid
Identne prEN 354:2006
Keel enAsendab prEN 354 rev
Tähtaeg 29.08.2006
prEN 1364-4
This European Standard specifies a method for determining the fire resistance of parts of curtain walling incorporating non-fire-resistant infilling product, e.g. glazing. It examines the fire resistance to internal and external fire exposure of:- spandrels, including downstand, upstand or the combinations thereof,- the horizontal linear gap seal and - the fixings used to attach the curtain walling to the floor element.
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
Identne prEN 1364-4:2006
Keel en
Tähtaeg 29.08.2006
prEN 1999-1-5 rev
EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
Identne prEN 1999-1-5:2006
Keel en
Tähtaeg 29.08.2006
prEN 13501-1 rev
Standard käsitleb kõikide ehitustoodete, sealhulgas ehituselementidega ühendatud toodete tuletundlikkuse klassifikatsiooni. Tooteid käsitletakse nende lõpprakenduse alusel.
Ehitustoodete ja -elementide tuleohutusalane klassifikatsioon. Osa 1: Klassifikatsioon tuletundlikkuse katsete alusel
Identne prEN 13501-1:2006
Keel etAsendab EVS-EN 13501-1:2004
Tähtaeg 29.08.2006
24
prEN ISO 9241-151
This International Standard provides recommendations and guidelines for the user-centred design of software user interfaces for World Wide Web applications (in short: Web user interfaces) to increase usability. Web user interfaces address either all Internet users or closed user groups such as the members of an organisation (intranet), customers and/or suppliers of a company (extranet) or other specific communities of users.
Ergonomics of human-system interaction - Part 151: Software ergonomics for World Wide Web user interfaces
Identne prEN ISO 9241-151:2006ja identne ISO/DIS 9241-151:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 9241-171
This part of ISO 9241 provides requirements and recommendations for the design of accessible software for use at work, in the home, in education and in public places. It covers issues associated with designing accessible software for people with the widest range of physical, sensory and cognitive abilities, including those who are temporarily disabled, and the elderly.
Ergonomics of human-system interaction - Part 171: Guidance on software accessibility
Identne prEN ISO 9241-171:2006ja identne ISO/DIS 9241-171:2006
Keel en
Tähtaeg 29.08.2006
17 METROLOOGIA JA MÕÕTMINE. FÜÜSIKALISED NÄHTUSEDUUED STANDARDID
EVS-EN 12261:2002/A1:2006
"This European Standard specifies the measuring conditions, requirements and tests for the construction, performance and safety of class 1,0 axial and radial turbine gas meters with mechanical indicating devices, herein after referred to as a meter(s), having in-line pipe connections for gas flow measurement."
Gas meters - Turbine gas meters
Hind 113,00Identne EN 12261:2002/A1:2006
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 50446 rev
This standard applies to straight thermocouples for the nominal pressure level PN 1, which are made of standardized components (connection head, protection tube and thermocouple(s)). Details regarding the operational areas of the thermocouples and the use of protection tubes are part of this standard.
Straight thermocouple assembly with metal or ceramic protection tube and accessories
Identne prEN 50446:2006
Keel enAsendab EVS-EN 50112:2002; EVS-EN 50113:2002
Tähtaeg 29.08.2006
prEN 60318-5
This part of IEC 60318 describes an acoustic coupler for loading an earphone or hearing aid with a specified acoustic impedance when determining its physical performance characteristics, in the frequency range 125 Hz to 8 kHz. It is suitable for air conduction hearing aids and earphones, coupled to the ear by means of ear inserts e.g. ear moulds or similar devices.
Electroacoustics - Simulators of human head and ear -- Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
Identne prEN 60318-5:2006ja identne IEC 60318-5:2006
Keel en
Tähtaeg 29.08.2006
prEN 61033
Describes three test methods to determine the bond strength of impregnating agents such as solvent-based varnishes and solventless resins. The three test methods most commonly used are: Twisted coil test, Helical coil test, Wire bundle test.
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
Identne IEC 61033:1991 + A1:2006ja identne prEN 61033:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 14509-1 rev
This International Standard specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull, including inboards, stern drives, personal watercraft (PWC) and outboard motors.
Väikelaevad. Lõbusõidulaevade õhu kaudu leviva müra mõõtmine
Identne prEN ISO 14509-1:2006ja identne ISO/DIS 14509-1:2006
Keel enAsendab EVS-EN ISO 14509:2003
Tähtaeg 29.08.2006
19 KATSETAMINEUUED STANDARDID
EVS-EN 584-1:2006
The purpose of this standard is to fix the performance of film systems. This standard is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). This standard is intended to assure that the image quality of radiographs – as far as this is influenced by the film system – is in conformity with the requirements of European Standards such as EN 444, EN 1435 and EN 12681.
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
Hind 104,00Identne EN 584-1:2006
Keel enAsendab EVS-EN 584-1:2000
25
EVS-IEC 60605-2:2006
It applies to the design of operating and environmental test cycles referred to in 8.1 and 8.2 of IEC 605-1.
Equipment reliability testing - Part 2: Design of test cycles
Hind 171,00ja identne IEC 60605-2:1994
Keel enEVS-IEC 60605-4:2006
Provides statistical methods for evaluating point estimates, confidence intervals, prediction intervals and tolerance intervals for the failure rate of items whose time to failure follows an exponential distribution.
Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
Hind 190,00ja identne IEC 60605-4+A1:2001
Keel enEVS-IEC 60605-6:2006
Specifies procedures to verify the assumption of a constant failure rate or constant failure intensity as defined in IEC 60050(191). These procedures are applicable whenever it is necessary to verify these assumptions. This may be due to a requirement or for the purpose of assessing the behaviour in time of the failure rate or the failure intensity.
Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions
Hind 123,00ja identne IEC 60605-6:1997+AC:2000
Keel enEVS-IEC 60605-3-1:2006
Applies to indoor portable equipment operated in a stationary position with a low degree of simulation. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Indoor portable equipment - Low degree of simulation
Hind 95,00ja identne IEC 60605-3-1:1986
Keel enEVS-IEC 60605-3-2:2006
Applies to equipment for stationary use in weatherprotected locations and in temperate climates. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Equipment for stationary use in weatherprotected locations - High degree of simulation
Hind 104,00ja identne IEC 60605-3-2:1986
Keel en
EVS-IEC 60605-3-4:2006
This section is applicable to portable equipment for non-stationary use covered by IEC 60721-3-7. The degree of simulation is low. Contains preferred test conditions as given in IEC 60605-1. During exposure to the test conditions, the test items should be monitored according to 9.1 of IEC 60605-1. The test cycle provided here is not intended to replace tests for other purposes, such as qualification tests, functional performance tests, environmental tests and tests aiming at the verification of the ability to survive or function during extreme conditions of storage, transportation or use.
Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
Hind 132,00ja identne IEC 60605-3-4:1992
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 584-1:2000
Standardi eesmärk on fikseerida filmisüsteemide tööomadused. Standard on kohaldatav kindlaksmääratud pliiekraanidega kombineeritud filmisüsteemide liigitamisel tööstusliku radiograafia jaoks.
Mittepurustav katsetamine. Tööstuslik radiograafiline film. Osa 1: Tööstusliku radiograafia filmisüsteemide liigitus
Identne EN 584-1:1994
Keel enAsendatud EVS-EN 584-1:2006
21 ÜLDKASUTATAVAD MASINAD JA NENDE OSADUUED STANDARDID
EVS-IEC 60605-2:2006
It applies to the design of operating and environmental test cycles referred to in 8.1 and 8.2 of IEC 605-1.
Equipment reliability testing - Part 2: Design of test cycles
Hind 171,00ja identne IEC 60605-2:1994
Keel enEVS-IEC 60605-4:2006
Provides statistical methods for evaluating point estimates, confidence intervals, prediction intervals and tolerance intervals for the failure rate of items whose time to failure follows an exponential distribution.
Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
Hind 190,00ja identne IEC 60605-4+A1:2001
Keel en
26
EVS-IEC 60605-6:2006
Specifies procedures to verify the assumption of a constant failure rate or constant failure intensity as defined in IEC 60050(191). These procedures are applicable whenever it is necessary to verify these assumptions. This may be due to a requirement or for the purpose of assessing the behaviour in time of the failure rate or the failure intensity.
Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions
Hind 123,00ja identne IEC 60605-6:1997+AC:2000
Keel enEVS-IEC 60605-3-1:2006
Applies to indoor portable equipment operated in a stationary position with a low degree of simulation. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Indoor portable equipment - Low degree of simulation
Hind 95,00ja identne IEC 60605-3-1:1986
Keel enEVS-IEC 60605-3-2:2006
Applies to equipment for stationary use in weatherprotected locations and in temperate climates. Contains preferred test conditions given in IEC 605-1.
Equipment reliability testing. Part 3: Preferred test conditions. Equipment for stationary use in weatherprotected locations - High degree of simulation
Hind 104,00ja identne IEC 60605-3-2:1986
Keel enEVS-IEC 60605-3-4:2006
This section is applicable to portable equipment for non-stationary use covered by IEC 60721-3-7. The degree of simulation is low. Contains preferred test conditions as given in IEC 60605-1. During exposure to the test conditions, the test items should be monitored according to 9.1 of IEC 60605-1. The test cycle provided here is not intended to replace tests for other purposes, such as qualification tests, functional performance tests, environmental tests and tests aiming at the verification of the ability to survive or function during extreme conditions of storage, transportation or use.
Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
Hind 132,00ja identne IEC 60605-3-4:1992
Keel en
EVS-IEC 60706-1:2006
Describes the concept of maintainability, defines the general approach and gives the objectives of maintainability. Gives the maintainability requirements for specifications and contracts and describes the contents of maintainability programmes. Sections 1 and 3 are replaced by IEC 60300-3-10 (2000).
Guide on maintainability of equipment. Part 1 - Sections One, Two and Three. Introduction, requirements and maintainability programme
Hind 141,00ja identne IEC 60706-1:1982
Keel enEVS-IEC 61123:2006
Specifies procedures for applying and preparing compliance test plans for success ratio or failure ratio. The procedures are based on the assumption that each trial is statistically independent. Supersedes IEC 605-5 and its amendment 1.
Reliability testing - Compliance test plans for success ratio
Hind 180,00ja identne IEC 61123:1991
Keel en
KAVANDITE ARVAMUSKÜSITLUS
IEC 60706-6
It specifies techniques covering some quantitative aspects of maintainability engineering in various phases of the system life cycle, and is applicable to the tasks of maintainabily demonstration and maintainability data evaluation.
Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation
ja identne IEC 60706-6:1994
Keel en
Tähtaeg 29.08.2006
prEN 60706-3
This part of IEC 60706 describes the various aspects of verification necessary to ensure that the specified maintainability requirements of an item have been met and provides suitable procedures and test methods. This standard also addresses the collection, analysis and presentation of maintainability related data, which may be required during, and at the completion of, design and during item production and operation.
Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data
Identne IEC 60706-3:200Xja identne prEN 60706-3:2006
Keel en
Tähtaeg 29.08.2006
prEN 60706-5
This guide has for purpose to provide guidance for the early consideration of testability aspects in design and development, and to assist in determining effective test procedures as an integral part of operation and maintenance.
Guide on maintainability of equipment - Part 5: Section 4: Diagnostic testing
Identne prEN 60706-5:2005ja identne IEC 60706-5:200X
Keel en
Tähtaeg 29.08.2006
27
prEN 61165
This International Standard provides guidance on the application of Markov techniques to model and analyze a system and estimate reliability, availability, maintainability and safety measures. This standard is applicable to all industries where systems, which exhibit state-dependent behaviour, have to be analyzed. The Markov techniques covered by this standard assume constant time-independent state transition rates. Such techniques are often called homogeneous Markov techniques.
Application of Markov techniques
Identne prEN 61165:2006ja identne IEC 61165:2006
Keel en
Tähtaeg 29.08.2006
23 ÜLDKASUTATAVAD HÜDRO- JA PNEUMOSÜSTEEMID JA NENDE OSADUUED STANDARDID
CEN/TS 15173:2006
The structure in the scope of PIMS is on-shore pipelines and related equipment (insulating devices, disconnecting devices, pre-pressure reduction devices, cathodic protection equipment and simple interconnections).
Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS)
Hind 171,00Identne CEN/TS 15173:2006
Keel enEVS-EN 1057:2006
See Euroopa standard määrab kindlaks proovivõtu, katsetusmeetodite ja tarnetingimuste nõuded vasktorude kohta, mille välisläbimõõt on 6 mm kuni 267 mm (267 mm kaasa arvatud).
Vask ja vasesulamid. Õmbluseta ümmargused vasest vee- ja gaasitorud sanitaarvaldkonnas kasutamiseks ja kütmiseks
Hind 199,00Identne EN 1057:2006
Keel enAsendab EVS-EN 1057:2000EVS-EN 1151-1:2006
This part of EN 1151 establishes general principles for the construction, use and testing of circulation pumps of the glandless type, having a rated power input P1 ≤ 200 W, intended to be used in heating installations and domestic hot water service installations.
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps, requirements, testing, marking
Hind 123,00Identne EN 1151-1:2006
Keel enAsendab EVS-EN 1151:2001
EVS-EN 1151-2:2006
This part of EN 1151 specifies a test code for the vibro-acoustic characterisation of circulation pumps as defined in EN 1151-1, and is limited to circulation pumps with threaded connections of 1½ inch. The test code comprises the test rig, the measurement method and the test conditions.
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibroacoustics) for measuring structure- and fluid-borne noise
Hind 151,00Identne EN 1151-2:2006
Keel enAsendab EVS-EN 1151:2001EVS-EN 1854:2006
See standard määrab kindlaks nõuded ja katsemeetodid rõhu sensorseadistele esimese, teise ja kolmanda klassi põletusgaaside, õhu, põlemissaaduste ja nende segude kontrollimiseks rõhkudel kuni 4 bar. Standard käsitleb kõiki rõhu sensorseadiste liike, sealhulgas elektroonilisi, diferentsiaal- ja inferentstüüpi.
Gaasipõletite ja gaasiseadmete rõhu sensorseadised
Hind 132,00Identne prEN 1854:2006
Keel enAsendab EVS-EN 1854:1999EVS-EN 1983:2006
This European Standard specifies requirements for industrial steel ball valves having flanged, threaded, socket welding or butt welding ends.
Tööstuslikud ventiilid. Terasest kuulklapid
Hind 132,00Identne EN 1983:2006
Keel enEVS-EN 13445-5:2002/A3:2006
This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2 subject to predominantly non_cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles).
Leekkuumutuseta surveanumad. Osa 5: Kontroll ja katsetamine
Hind 84,00Identne EN 13445-5:2002/A3:2006
Keel enEVS-EN 14638-1:2006
This European Standard gives minimum requirements concerning material, design, construction and workmanship, procedures and tests at manufacture of refillable transportable welded cylinders made of austenitic stainless steel, justified by experimental methods, of water capacities from 0,5 l up to and including 150 l for compressed or liquefied gases and of a test pressure up to 90 bar.
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
Hind 190,00Identne EN 14638-1:2006
Keel en
28
EVS-EN 14894:2006
This European Standard specifies stamp marking requirements for transportable refillable LPG cylinders and metallic drums including: - Steel LPG cylinders designed and manufactured in accordance with EN 1442, EN 14140, EN 12807 or an equivalent standard or technical code recognised by the Competent Authority.- LPG metallic drums designed and manufactured in accordance with prEN 14893 or an equivalent standard or technical code recognised by the Competent Authority.
LPG equipment and accessories - Cylinder and drum marking
Hind 104,00Identne EN 14894:2006
Keel enEVS-EN 60335-2-40:2003/A1:2006
Deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating sealed motor-compressors. The maximum rated voltage being not more than 250 V for single phase and 600 V for all other appliances. The referenced appliances may consist of one or more assemblies. If provided in more than one assembly, the assemblies are to used together, and the requirements are based on the use of matched assemblies. Supplementary heaters, or a provision for their seperate installation, are within the scope of this standard, but only heaters which are designed as a part of the appliance package, the controls being incorporated in the appliance
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-40: Erinõuded elektrilistele soojuspumpadele, kliimaseadmetele ja õhukuivatitele
Hind 199,00Identne EN 60335-2-40:2003/A1:2006ja identne IEC 60335-2-40:2002/A1:2005
Keel enEVS-EN 60335-2-67:2003/A1:2006
This standard applies to electrical motor-operated floor polishing (including waxing and buffing), scrubbing and grinding, scarifying and carpet shampooing appliances primarily designed for industrial and commercial use, with or without attachments, inclu
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-67: Erinõuded põrandahooldus- ja puhastusmasinatele tööstuslikuks ja kaubanduslikuks kasutamiseks
Hind 113,00Identne EN 60335-2-67:2003/A1:2006ja identne IEC 60335-2-67:2002/A1:2005
Keel enEVS-EN ISO 13769:2006
This International Standard specifies stamp marking of refillable transportable gas cylinders and tubes of volume greater than 0,5 l and less than or equal to 3 000 l including: - steel and aluminium gas cylinders; - composite gas cylinders; - acetylene cylinders.
Gas cylinders - Stamp marking
Hind 132,00Identne EN ISO 13769:2006ja identne ISO 13769:2002
Keel enAsendab EVS-EN 1089-1:1999
EVS-EN ISO 16148:2006
This International Standard is a guideline for using acoustic emission testing (AT) during re-qualification of seamless steel cylinders and tubes of water capacity up to 3 000 l used for compressed and liquefied gases. For cylinders below 20 l additional precautions may be taken due to the potential reflections from the ends. This examination provides indications and locations that should be evaluated by another examination for a possible flaw in the cylinder. This International Standard covers monolithic steel cylinders.
Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection
Hind 171,00Identne EN ISO 16148:2006ja identne ISO 16148:2006
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 1057:2000
See Euroopa standard määrab kindlaks proovivõtu, katsetusmeetodite ja tarnetingimuste nõuded vasktorude kohta, mille välisläbimõõt on 6 mm kuni 267 mm (267 mm kaasa arvatud).
Vask ja vasesulamid. Õmbluseta ümmargused vasest vee- ja gaasitorud sanitaarvaldkonnas kasutamiseks ja kütmiseks
Identne EN 1057:1996
Keel enAsendatud EVS-EN 1057:2006EVS-EN 1089-1:1999
This European Standard specifies stampmarking of refillable transportable gas cylinders of volume up to and greater than 150 L, including: - steel- and aluminium gas cylinders;- gas cylinders of composite construction;�These being hereinafter referred to as "cylinders".
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 1: Stampmarking
Identne EN 1089-1:1996
Keel enAsendatud EVS-EN ISO 13769:2006EVS-EN 1151:2001
This European Standard establishes general principles for the construction, use and testing of circulation pumps having an electrical power input P1 smaller or equal to 200W, intended for use in heating installations and domestic hot water service installations
Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200W for heating installations and domestic hot water installations - Requirements, testing, marking
Identne EN 1151:1999
Keel enAsendatud EVS-EN 1151-2:2006; EVS-EN 1151-1:2006
29
EVS-EN 1854:1999
See standard määrab kindlaks nõuded ja katsemeetodid rõhu sensorseadistele esimese, teise ja kolmanda klassi põletusgaaside, õhu, põlemissaaduste ja nende segude kontrollimiseks rõhkudel kuni 4 bar. Standard käsitleb kõiki rõhu sensorseadiste liike, sealhulgas elektroonilisi, diferentsiaal- ja inferentstüüpi.
Gaasipõletite ja gaasiseadmete rõhu sensorseadisedIdentne EN 1854:1997+A1:1998
Keel enAsendatud EVS-EN 1854:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 13317:2003/prA1
This European Standard covers the manhole cover assembly and specifies the performance requirements,�dimensions and tests necessary to verify the compliance of the equipment to this standard
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
Identne EN 13317:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 13445-3:2002/prA10
This Part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1:2002 and constructed of steels in accordance with EN 13445-2:2002. EN 13445-5:2002, Annex C specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements.
Leekkuumutuseta surveanumad. Osa 3: Kavandamine
Identne EN 13445-3:2002/prA10:2006
Keel en
Tähtaeg 29.08.2006
EN 14140:2003/prA1
This European Standard specifies minimum requirements concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders of water capacity from 0,5 l up to and including 150 l exposed to ambient temperatures, allowing alternative design and construction methods to those required in EN 1442.This European Standard applies only to cylinders with a circular cross-section. All pressures are gauge unless otherwise stated.
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
Identne EN 14140:2003/prA1:2006
Keel en
Tähtaeg 29.08.2006
prEN 545 rev
This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines: - to convey water (e. g. potable water); - with or without pressure; - to be installed below or above ground.
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Identne prEN 545:2006
Keel enAsendab prEN 545 rev
Tähtaeg 29.08.2006
prEN 1112 rev
Käesoleva standardi eesmärk on kindlaks määrata järgmised omadused: - lekkekindlus, dimensionaalsed, mehaanilised, hüdraulilised ja akustilised parameetrid, millele du i väljavooluavad peavad vastama; - nende parameetrite testimise meetodid. Standard kehtib mistahes materjalist du iotste ja käsidu ide kohta, mida kasutatakse pesemiseks ning mis on mõeldud vannide ja du ide sanitaartehniliste kraanide varustamiseks ja täienduseks.
Duši väljavooluavad (PN 10) sanitaartehniliste kraanide jaoks
Identne prEN 1112:2006
Keel enAsendab EVS-EN 1112:2000
Tähtaeg 29.08.2006
prEN 1113 rev
Käesoleva standardi eesmärk on kindlaks määrata järgmised omadused: - lekkekindlus, dimensionaalsed, mehaanilised, hüdraulilised ja akustilised parameetrid, millele du i voolikud peavad vastama; - nende parameetrite testimise meetodid. Standard kehtib pesemiseks kasutatavate du ide mistahes materjalist voolikute kohta ning need voolikud on mõeldud vannide ja du ide sanitaartehniliste kraanide ühendamiseks du ikäepidemetega. Need voolikud võib ühendada ainult kraani sulguri sissevooluavaga.
Dušivoolikud (PN 10) sanitaartehniliste kraanide jaoks
Identne prEN 1113:2006
Keel enAsendab EVS-EN 1113:2000
Tähtaeg 29.08.2006
prEN ISO 7225 rev
This International Standard specifies the design, content (i.e. hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this International Standard.
Gas cylinders - Precautionary labels
Identne prEN ISO 7225:2006ja identne ISO 7225:2005
Keel enAsendab EVS-EN 1089-2:2002
Tähtaeg 29.08.2006
30
prEN ISO 7866
This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable seamless aluminium alloy gas cylinders of water capacities up to and including 150 l for compressed, liquefied and dissolved gases for worldwide use (normally up to + 65 °C).
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing
Identne prEN ISO 7866:2006ja identne ISO/DIS 7866:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 15877-1 rev
This Part of prEN ISO 15877 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
Identne prEN ISO 15877-1:2006ja identne ISO/DIS 15877-1:2006
Keel enAsendab EVS-EN ISO 15877-1:2004
Tähtaeg 29.08.2006
prEN ISO 15877-2 rev
This Part of prEN ISO 15877:2002 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
Identne prEN ISO 15877-2:2006ja identne ISO/DIS 15877-2:2006
Keel enAsendab EVS-EN ISO 15877-2:2004
Tähtaeg 29.08.2006
prEN ISO 15877-3 rev
This Part of prEN ISO 15877 specifies the characteristics of fittings made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
Identne prEN ISO 15877-3:2006ja identne ISO/DIS 15877-3:2006
Keel enAsendab EVS-EN ISO 15877-3:2004
Tähtaeg 29.08.2006
prEN ISO 15877-5 rev
This Part of prEN ISO 15877 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
Identne prEN ISO 15877-5:2006ja identne ISO/DIS 15877-5:2006
Keel enAsendab EVS-EN ISO 15877-5:2004
Tähtaeg 29.08.2006
25 TOOTMISTEHNOLOOGIAUUED STANDARDID
EVS-EN 61308:2006
This International Standard is applicable to industrial high-frequency dielectric heating installations used for the purpose of thermal applications such as melting, drying, welding, insect extermination, and gluing of partially conductive or non-conductive materials such as plastics, wood, rubber, textiles, glass, ceramic, paper, bamboo or foodstuffs, in both normal and protective atmospheres, using, for example, inert gases or vacuum.
Kõrgsageduslikud dielektrilised kuumutuspaigaldised. Katsetusmeetodid väljundvõimsuse kindlakstegemiseks
Hind 151,00Identne EN 61308:2006ja identne IEC 61308:2005
Keel enAsendab EVS-EN 61308:2001EVS-EN ISO 14323:2006
This International Standard covers destructive testing of welds. This International Standard specifies specimen dimensions and testing procedures for impact shear and cross-tension testing of resistance spot and embossed projection welds in overlapping sheets, in any metallic material of thickness 0,5 mm to 4 mm.
Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
Hind 162,00Identne EN ISO 14323:2006ja identne ISO 14323:2006
Keel en
31
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 61308:2001
Specifies the test methods of electroheating installations used for heating, assembly by melting and drying of materials such as wood, rubber, textiles, glass, papers, etc. Applies to installations operating in the frequency range 1 MHz to 300 MHz for power levels of 50 W and above. Shall be used in conjunction with IEC 519-9..
Kõrgsageduslikud dielektrilised kuumutuspaigaldised. Katsetusmeetodid väljundvõimsuse kindlakstegemiseks
Identne EN 61308:1996ja identne IEC 1308:1994
Keel enAsendatud EVS-EN 61308:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 60745-2-4:2003/prAB
This standard applies to sanders with the exception of all types of disc-type sanders which are covered by EN 50144-2-3.
Käsimootoriga elektrilised tööriistad. Ohutus. Osad 2-4: Erinõuded mitte ketastüübilistele lihvimis- ja poleerimismasinatele
Identne EN 60745-2-4:2003/prAB:2006
Keel en
Tähtaeg 29.08.2006
EN 60745-2-8:2003/prAB
Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-phase a.c. tools. Supplements or modifies the corresponding clauses of IEC 60745-1
Käsimootoriga elektrilised tööriistad. Ohutus. Osad 2-8: Erinõuded lõikuritele ja purustitele
Identne EN 60745-2-8:2003/prAB:2006
Keel en
Tähtaeg 29.08.2006
EN 60745-2-6:2003/prAB
Deals with the safety of hand-held motor-operated or magnetically driven tools, specifically hammers.The rated voltage of the hammers is not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools. Tools covered by this standa
Käeshoitavad mootorajamiga elektritööriistad. Ohutus. Osa 2-5: Erinõuded haamritele
Identne EN 60745-2-6:2003/prAB:2006
Keel en
Tähtaeg 29.08.2006
prEN 1044 rev
Käesolev Euroopa standard määrab kindlaks rea kõrgtemperatuurijootmisel kasutatavate lisametallide koostisi. Lisametallid on koostise alusel jaotatud kaheksasse klassi, kusjuures tingimata pole lähtutud põhielemendi olemasolust. Segamaterjalide osas (nagu räbustiga kaetud vardad, pastad või plastteibid) hõlmab standard ainult lisametalli, mis on nende toodete osaks.
Brazing - Filler metals
Identne prEN 1044:2006
Keel enAsendab EVS-EN 1044:1999
Tähtaeg 29.08.2006
prEN 14673
This European Standard applies to:- hydraulically powered open die forging presses for hot working;- handling and cooling equipment connected with the control system of the forging line, e. g., manipulators, rotating type handling devices, die shifting devices, table devices and tool changing devices;- handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, turnover or handling devices attached to fork lift trucks or cranes etc.
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
Identne prEN 14673:2006
Keel en
Tähtaeg 29.08.2006
prEN 60745-2-5:2003/prAA
Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for circular saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools. This standard does not apply to saws used with abrasive wheels
Käeshoitavad mootorajamiga elektritööriistad. Ohutus. Osa 2-5: Erinõuded ketassaagidele
Identne prEN 60745-2-5:2006/prAA:2006
Keel en
Tähtaeg 29.08.2006
prEN 60745-2-3 rev
This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.
Elektrimootoriga töötavate käeshoitavate tööriistade ohutus. Osa 2-3: Erinõuded lihvmasinatele, ketaslihvpinkidele ja poleerimisseadmetele
Identne prEN 60745-2-3:2006ja identne (IEC 60745-2-3:2006
Keel en
Tähtaeg 29.08.2006
prEN 61029-2-6
This European standard applies to transportable diamond drills manually fed, intended to be connected to a water supply (water supply may include water source from a pipe or tank or vat).
Safety of transportable motor-operated electric tools Part 2-6: Particular requirements for diamond drills with water supply
Identne prEN 61029-2-6:2006
Keel en
Tähtaeg 29.08.2006
32
prEN 62076
This International Standard applies to electrical installations comprising industrial induction channel furnaces and induction crucible furnaces for melting, holding and superheating. Its object is the standardization of test methods to determine the essential parameters and technical characteristics of electroheat installations comprising furnaces of the type indicated above.
Induction channel and induction crucible furnaces - Test methods
Identne prEN 62076:2006ja identne IEC 62076:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 9453 rev
Käesolev standard määrab kindlaks nõuded keemilisele koostisele järgmiste madaltemperatuuriliste pehmejoodiste rühmade korral: tina-plii koos või ilma antimonita; tina-hõbe koos või ilma pliita; tina-vask koos või ilma pliita; tina-antimon; tina-plii-vismut; vismut-tina; tina-plii-kaadmium; tina-indium; plii-hõbe koos või ilma tinata. Standard hõlmab ka üldkasutatavate joodiste kujusid.
Madaltemperatuurilised pehmejoodissulamid. Keemiline koostis ja kuju
Identne prEN ISO 29453:2006ja identne (ISO/FDIS 9453:2006
Keel enAsendab EVS-EN 29453:1999
Tähtaeg 29.08.2006
prEN ISO 14555 rev
This International Standard covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
Welding - Arc stud welding of metallic materials
Identne prEN ISO 14555:2006ja identne ISO/FDIS 14555:2006
Keel enAsendab EVS-EN ISO 14555:1999
Tähtaeg 29.08.2006
prEN ISO 17660-1
This part of ISO 17660 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of load-bearing joints, in workshops or on site. It specifies requirements for materials, design and execution of welded joints, welding personnel, quality requirements, examination and testing.
Welding - Welding of reinforcing steel - Part 1: Load bearing welded joints
Identne prEN ISO 17660-1:2006ja identne ISO/FDIS 17660-1:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 17660-2
This part of ISO 17660 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of non load-bearing welded joints, in workshops or on site. It specifies requirements for materials, design and execution of welded joints, welding personnel, quality requirements, examination and testing.
Welding - Welding of reinforcing steel - Part 2: Non-load bearing welded joints
Identne prEN ISO 17660-2:2006ja identne ISO/FDIS 17660-2:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 21952 rev
This International Standard specifies requirements for classification of wire electrodes, wires, and rods for gas shielded metal arc welding and tungsten inert gas welding of creep-resisting steels, and for their deposits in the as-welded or post weld heat treated condition. One wire electrode can be tested and classified with different shielding gases.
Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification
Identne prEN ISO 21952:2006ja identne ISO/DIS 21952:2006
Keel enAsendab EVS-EN 12070:2000
Tähtaeg 29.08.2006
27 ELEKTRI- JA SOOJUSENERGEETIKAKAVANDITE ARVAMUSKÜSITLUS
EN 61730-1:2006/prAA
Photovoltaic (PV) module safety qualification Part 1: Requirements for construction
Identne EN 61730-1:2006/prAA:2006
Keel en
Tähtaeg 29.08.2006
29 ELEKTROTEHNIKAUUED STANDARDID
CLC/TR 50126-3:2006
This document provides guidance on applying the RAM requirements in EN 50126-1 to rolling stock and for dealing with RAM activities during the system life cycle phases from invitation to tender to demonstration in operation only. All references to EN 50126-1 concern the version of 1998.
Railway applications – The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS
Hind 246,00Identne CLC/TR 50126-3:2006
Keel en
33
CLC/TR 62102:2006
This technical report applies to equipment interfaces. These interfaces within the equipment may be connected to telecommunication networks, may form part of the telecommunication network infrastructure or may provide localized transfer of data. This technical report provides guidance on the classification of interfaces in accordance with the circuit types defined in IEC 60950-1 and IEC 60950-21 following an analysis of the telecommunication network characteristics.
Electrical safety – Classification of interfaces for equipment to be connected to information and communications technology networks
Hind 190,00Identne CLC/TR 62102:2006ja identne IEC/TR 62102:2005
Keel enAsendab CLC/TR 62102:2005CLC/TS 50458:2006
This Technical Specification is applicable to capacitance graded outdoor bushings with values of highest voltage for equipment (Um) from 52 kV up to 420 kV and with values of rated current (Ir) up to 3 150 A and frequencies from 15 Hz up to 60 Hz for oil immersed transformers.
Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers
Hind 141,00Identne CLC/TS 50458:2006
Keel enEVS-EN 50393:2006
This European Standard details the performance requirements and the test methods for type tests for cable accessories for use on cables of rated voltage 0,6/1,0 (1,2) kV as defined in HD 603.
Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
Hind 190,00Identne EN 50393:2006
Keel enAsendab EVS-HD 623 S1:2003EVS-EN 60950-22:2006
This part of IEC 60950 applies to information technology equipment intended to be installed in an OUTDOOR LOCATION. The requirements for OUTDOOR EQUIPMENT also apply, where relevant, to empty OUTDOOR ENCLOSURES supplied for housing information technology equipment to be installed in an OUTDOOR LOCATION.
Information technology equipment - Safety Part 22: Equipment installed outdoors
Hind 180,00Identne EN 60950-22:2006ja identne IEC 60950-22:2005
Keel en
EVS-EN 60950-23:2006
This part of IEC 60950 specifies requirements for information technology equipment (ITE) with self contained data storage systems that contain hazardous moving parts. These data storage systems are typically large enough to permit a person to enter completely, however, the systems also include similar large equipment permitting complete limb or head access to the area containing hazardous moving parts.
Information technology equipment - Safety Part 23: Large data storage equipment
Hind 141,00Identne EN 60950-23:2006ja identne IEC 60950-23:2005
Keel enEVS-EN 61347-2-3:2002/A2:2006
This part of IEC 61347 specifies particular safety requirements for electronic ballasts for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. This first edition of IEC 61347-2-3, together with IEC 61347-1, cancels and replaces the second edition of IEC 60928, published in 1995, and constitutes a minor revision. This standard shall be used in conjunction with IEC 61347-1. It was established on the basis of the first edition (2000) of that standard.
Lampide juhtimisseadised. Osa 2-3: Erinõuded luminofoorlampide vahelduvvoolutoitega elektron-liiteseadistele
Hind 123,00Identne EN 61347-2-3:2001/A2:2006ja identne IEC 61347-2-3:2000/A2:2006
Keel enEVS-EN 61347-2-8:2002/A1:2006
This part of IEC 61347 specifies safety requirements for ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in IEC 60081 and 60901. This first edition of IEC 61347-2-8, together with IEC 61347-1, cancels and replaces the first edition of IEC 60920, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with IEC 61347-1. It was established on the basis of the first edition (2000) of that standard.
Lampide juhtimisseadised. Osa 2-8: Erinõuded luminofoorlampide liiteseadistele
Hind 104,00Identne EN 61347-2-8:2001/A1:2006ja identne IEC 61347-2-8:2000/A1:2006
Keel en
34
EVS-EN 61377-1:2006
This part of IEC 61377 applies to the combinations of motor(s), inverter and their control system, and its object is to specify: − the performance characteristics of electric drives consisting of an inverter, alternating current motors, and the related control system; − methods of verifying these performance characteristics by tests.
Railway applications - Rolling stock Part 1: Combined testing of inverter-fed alternating current motors and their control system
Hind 162,00Identne EN 61377-1:2006ja identne IEC 61377-1:2006
Keel enEVS-EN 62271-108:2006
This part of IEC 62271 applies to high-voltage alternating current disconnecting circuitbreakers for operation at frequencies of 50 Hz and 60 Hz on systems having voltages of 72,5 kV and above. This standard identifies which requirements of IEC 60694, IEC 62271-100 and IEC 62271-102 standards are applicable. It also gives the additional requirements specific to these devices.
High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
Hind 162,00Identne EN 62271-108:2006ja identne IEC 62271-108:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-HD 623 S1:2003
This specification details the performance requirements for joints, stop ends and outdoor terminations for cables of rated voltage 0,6/1,0(1,2) kV as defined in HD 603. Joints, stop ends and outdoor terminations for extruded solid dielectric insulated cables and transition joints between extruded solid dielectric insulated and impregnated paper insulated cables are included. Joints, stop ends and outdoor terminations for impregnated paper insulated cables are not included.
Specifications for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV
Identne HD 623 S1:1996+A1:2001
Keel enAsendatud EVS-EN 50393:2006
KAVANDITE ARVAMUSKÜSITLUS
CLC/prTR 61800-6
This technical report provides alternative methods for specifying ratings for adjustable speed electrical power drive systems (PDS) and in particular their basic drive modules (BDM). It is not intended to cover adjustable speed drives for traction purposes.
Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and corresponding current ratings
Identne CLC/prTR 61800-6:2006ja identne IEC/TR 61800-6:2003
Keel en
Tähtaeg 29.08.2006
CLC/prTS 61111
Applies to insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on a.c. and d.c. installations.
Matting of insulating material for electrical purposes
Identne CLC/prTS 61111:2006ja identne IEC 61111:1992 + A1:2002 + corrigendum May 2000
Keel en
Tähtaeg 29.08.2006
CLC/prTS 61112
Applies to insulating blankets for the protection of workers from accidental contact with live or earthed electrical conductors, apparatus or circuits and avoidance of short circuits on a.c. and d.c. installations.
Blankets of insulating material for electrical purposes
Identne CLC/prTS 61112:2006ja identne IEC 61112:1992 + corr. May 2000 + A1:2002
Keel en
Tähtaeg 29.08.2006
EN 10280:2001/prA1
This European Standard defines the general principles of the measurement of the magnetic properties of electrical sheets and strips by means of a single sheet tester and gives the technical details of the measurement of specific total loss and of magnetic field strength, excitation current and specific apparent power.
Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
Identne EN 10280:2001/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50163:2005/prAA
This European Standard specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications : – railways; - guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; – material transportation systems.
Raudteealased rakendused. Veosüsteemide tööpinge
Identne EN 50163:2004/prAA:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-21:2002/prA1
This Part 2-21 of EN 50290 gives specific requirements for PVC insulation compounds used�for communication cables. It is to be read in conjunction with Part 2-20 of EN 50290.
Communication cables Part 2-21: Common design rules and construction PVC insulation compounds
Identne EN 50290-2-21:2001/prA1:2006
Keel en
Tähtaeg 29.08.2006
35
EN 50290-2-22:2002/prA1
This Part 2-22 of EN 50290 gives specific requirements for PVC sheathing compounds�used for communication cables. It is to be read in conjunction with Part 2-20 of EN 50290.
Communication cables Part 2-22: Common design rules and construction - PVC sheathing compounds
Identne EN 50290-2-22:2001/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-26:2003/prA1
This Part 2-26 of EN 50290 gives specific requirements for halogen free flame retardant insulation compounds used in communication cables.
Communication cables Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds
Identne EN 50290-2-26:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-27:2003/prA1
This Part 2-27 of EN 50290 gives specific requirements for halogen free flame retardant thermoplastic sheathing compounds used in communication cables.
Communication cables Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds
Identne EN 50290-2-27:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 60309-1:2004/prAA
Applies to plugs and socket-outlets, cable couplers and appliance couplers, with a rated operating voltage not exceeding 690 V d.c. or a.c., 500 Hz a.c. and a rated current not exceeding 250 A, primarily intended for industrial use, either indoors or outdoors when the ambient temperature does not normally exceed 40° C
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
Identne EN 60309-1:1999/prAA:2006
Keel enAsendab EVS-EN 60309-1:2001/A11:2004
Tähtaeg 29.08.2006
EN 60335-2-95:2005/prA1
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the movement of these electrically driven garage doors is included.
Household and similar electrical appliances – Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
Identne EN 60335-2-95:2004/prA1:2006ja identne IEC 60335-2-95:2002/A1:2004
Keel en
Tähtaeg 29.08.2006
IEC 60050(191):2006/A1
Amendment 1 - International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990/A1:1999
Keel en
Tähtaeg 29.08.2006
IEC 60050(191)
Replaces 271 (A-C).
International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990
Keel en
Tähtaeg 29.08.2006
IEC 60050(191):2006/A2
Amendment 2 - International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service
ja identne IEC 60050-191:1990/A2:2002
Keel en
Tähtaeg 29.08.2006
IEC 60050-826
IEC 60050 osa 826 käsitleb selliseid elektripaigaldisi, mida kasutatakse nt elamutes, tööstus- ja äriettevõtetes. See ei käsitle avalikke energiajaotussüsteeme ega elektrienergia tootmist ega edastamist nendes süsteemides.
Rahvusvaheline elektrotehnika sõnastik. Osa 826: Elektripaigaldised
ja identne IEC 60050-826:2004
Keel en
Tähtaeg 8.04.2006
prEN 50214 rev
This European Standard covers the construction, requirements and particular test methods for flat, flexible PVC insulated and PVC sheathed cables, of rated voltage Uo/U 300/500 V, for use in passenger and goods lifts (elevators), and Uo/U 450/750 V for general purposes and for special applications such as hoists and travelling cranes.
Flat polyvinyl chloride sheathed flexible cables
Identne prEN 50214:2006
Keel enAsendab EVS-EN 50214:2001; EVS-HD 359 S2:2003
Tähtaeg 29.08.2006
EN 50317:2003/prAA
The European standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line
Raudteealased rakendused. Vooluvõtusüsteemid. Pantograafi ja liinivahelise dünaamilise vastasmõju mõõtmiste esitatavad nõuded ja hindamine
Identne EN 50317:2002/prAA:2006
Keel en
Tähtaeg 29.08.2006
prEN 60034-26
This part of IEC 60034 describes the effects of unbalanced voltages on the performance of three-phase cage induction motors.
Rotating electrical machines -- Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
Identne prEN 60034-26:2006ja identne IEC 60034-26:2006
Keel en
Tähtaeg 29.08.2006
36
prEN 61033
Describes three test methods to determine the bond strength of impregnating agents such as solvent-based varnishes and solventless resins. The three test methods most commonly used are: Twisted coil test, Helical coil test, Wire bundle test.
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
Identne IEC 61033:1991 + A1:2006ja identne prEN 61033:2006
Keel en
Tähtaeg 29.08.2006
prEN 61138:2002/prAA
Applies to flexible cables with covering based on ethylene propylene rubber (EPR) or on polyvinyl chloride (PVC) for portable earthing and short-circuiting equipment.
Kantavate maandamis- ja lühistamisseadiste kaablid
Identne prEN 61138:2006/prAA:2006
Keel en
Tähtaeg 29.08.2006
prEN 61788-10
This part of IEC 61788 specifies a test method for the resistive determination of the critical temperature of composite superconductors for industrial use. The composite superconductors covered in this standard include Cu/Nb-Ti, Cu/Cu-Ni/Nb-Ti and Cu-Ni/Nb-Ti composite superconductors, Cu/Nb3Sn and Cu/Nb3Al composite superconductors, and metal-sheathed MgB2 composite superconductors, and metal-stabilized Bisystem oxide superconductors and Yttrium- or rare-earth-based coated conductors that havea monolithic structure and a shape of round, flat or square wire containing mono- or multicores of superconductors.
Superconductivity -- Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
Identne prEN 61788-10:2006ja identne IEC 61788-10:2006
Keel enAsendab EVS-EN 61788-10:2003
Tähtaeg 29.08.2006
prHD 22.9 S3
This particular Part (Part 9) of the HD details the specifications for single core halogen-free non-sheathed cables for fixed wiring of rated voltage up to and including 450/750 V, insulated with cross-linked compound and having low emission of smoke.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 9: Ühesoonelised kaitsekestata kaablid kohtkindlale juhistikule, madala suitsu ja korrodeerivate gaaside emissiooniga
Identne prHD 22.9 S3:2006
Keel enAsendab EVS-HD 22.9 S2:2001
Tähtaeg 29.08.2006
prHD 22.10 S2
This Part 10 of the HD details the particular requirements for ethylene-propylene rubber insulated, and thermoplastic polyurethane sheathed cable for a maximum conductor temperature of 90 °C and lowest handling temperature of –40 °C. Each cable shall comply with the appropriate requirements given in Part 1 of this HD and the particular requirements of this Part.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 10: Eteenpropeenkummiisolatsiooni ja polüuretaanmantliga paindkaablid
Identne prHD 22.10 S2:2006
Keel enAsendab EVS-HD 22.10 S1:2001
Tähtaeg 29.08.2006
prHD 22.11 S2
This Part 11 of the HD details the particular specifications for cross-linked EVA or equivalent synthetic elastomer insulated and vulcanised EVA or equivalent synthetic elastomer sheathed cords and flexible cables of rated voltages up to and including 300/500 V for use with a conductor temperature not exceeding 110 °C.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 11: Paindkaablid
Identne prHD 22.11 S2:2006
Keel enAsendab EVS-HD 22.11 S1:2001
Tähtaeg 29.08.2006
prHD 22.12 S2
This part Part 12 of the HD details the particular specifications for heat-resistant EPR or equivalent synthetic elastomer insulated and heat-resistant EPR or CSP or equivalent synthetic elastomer sheathed cords and flexible cables, of rated voltages up to and including 450/750 V, for use with a conductor temperature not exceeding 90 °C.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 12: Kuumuskindlad eteenpropeenkummiisolatsioonigapaindkaablid
Identne prHD 22.12 S2:2006
Keel enAsendab EVS-HD 22.12 S1:2001
Tähtaeg 29.08.2006
prHD 22.13 S2
This part (Part 13) of the HD details the particular specifications for single and multicore halogen-free flexible cables of rated voltage 450/750 V, insulated and sheathed with cross-linked compound, and having low emission of smoke.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 13: Ühe- ja mitmesoonelised, võrkstruktuurisolatsiooni ja -mantliga paindkaablid madala suitsu ja korrodeerivate gaaside emissiooniga
Identne prHD 22.13 S2:2006
Keel enAsendab EVS-HD 22.13 S1:2001
Tähtaeg 29.08.2006
37
prHD 22.14 S3
This Part 14 of HD 22 details the particular specifications for EPR insulated and EPR sheathed, XLPVC insulated and XLPVC sheathed, and EPR insulated and textile braid covered cords of rated voltage 300/300 V, for use in applications where high flexibility is required.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 14: Paindkaablid kõrgpaindlikkust nõudvatele rakendustele
Identne prHD 22.14 S3:2006
Keel enAsendab EVS-HD 22.14 S2:2003
Tähtaeg 29.08.2006
prHD 22.15 S2
This Part 15 of the HD details the specifications for multicore cables of rated voltage 300/500 V, insulated and sheathed with heat resistance silicone rubber, with or without strain-bearing element. The maximum permissible conductor temperature is 180 °C.
Kummiisolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 15: Mitmesoonelised kuumuskindla silikoonkummiisolatsiooni ja -mantliga kaablid
Identne prHD 22.15 S2:2006
Keel enAsendab EVS-HD 22.15 S1:2001
Tähtaeg 29.08.2006
prHD 22.16 S2
This Part 16 of the HD details the particular specifications for water resistant EPR insulated, polychloroprene or other equivalent synthetic elastomer sheathed flexible cables of rated voltages up to and including 450/750 V, meant for applications in fresh water up to 10 m depth and water temperatures up to 40 °C.
Kummeeritud isolatsiooniga kaablid nimipingega kuni 450/750 V. Osa 16: Veekindlad polükloropreenvõi samaväärse elastomeermantliga kaablid
Identne prHD 22.16 S2:2006
Keel enAsendab EVS-HD 22.16 S1:2001
Tähtaeg 29.08.2006
prHD 60364-7-701
Madalpingelised elektripaigaldised. Osa 7-701: Nõuded eripaigaldistele ja paikadele. Dushi- või vanniruumid
Identne prHD 60364-7-701:2005
Keel en
Tähtaeg 1.09.2006
prHD 60364-7-704
Käesolev standard kehtestab erinõuded järgmistes paikades asuvatele ajutise iseloomuga elektripaigaldistele - uute hoonete ehituspaigad; olemasolevate hoonete remondi- ja parandusega seotud paigad, laiendamis- või lammutuspaigad; tehniliste lahenduste teostuspaigad hoonetes; maandustööde teostamis- ja sarnased paigad.
Ehitiste elektripaigaldised. Osa 7: Nõuded eripaigaldistele ja paikadele. Jagu 704: Ehituspaikade paigaldised
Identne HD 60364-7-704:200Xja identne IEC 60364-7-704:2005
Keel enAsendab EVS-HD 384.7.704 S1:2004
Tähtaeg 1.09.2006
prHD 60364-7-705
Applies to all parts of fixed installations of agricultural and horticultural premises outdoors and indoors and to locations where livestock are kept (such as stables, chicken-houses, piggeries, feed-processing locations, lofts and storages for hay, straw and fertilisers).
Electrical installations of buildings. Part 7: Requirements for special installations or locations. Section 705: Electrical installations of agricultural and horticultural premises
Identne prHD 60364-7-705:2006ja identne IEC 60364-7-705:200X
Keel en
Tähtaeg 28.08.2006
prHD 60364-7-706
The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where the possibility of interrupting this contact is limited.
Low-voltage electrical installations -- Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
Identne HD 60364-7-706:200Xja identne IEC 60364-7-706:2005
Asendab EVS-HD 384.7.706 S1:2003
Tähtaeg 1.09.2006
31 ELEKTROONIKAUUED STANDARDID
CLC/TS 50466:2006
Long duration storage of electronic components – Specification for implementation
Hind 180,00Identne CLC/TS 50466:2006
Keel enEVS-EN 61967-4:2003/A1:2006
Specifies a method to measure the conducted electromagnetic emission of integrated circuits by direct RF current measurement with a 1 ohm resistive probe and RF voltage measurement using a 150 ohm coupling network. These methods guarantee a high degree of repeatability and correlation of measurements.
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method
Hind 95,00Identne EN 61967-4:2002/A1:2006ja identne IEC 61967-4:2002/A1:2006
Keel en
38
EVS-EN ISO 11145:2006
See rahvusvaheline standard määratleb lasertehnoloogia valdkonnas põhiterminid, sümbolid ja mõõtühikud, et ühtlustada terminoloogiat ja saavutada selged määratlused ja laserikiire parameetrite korduvkatsed ning lasertehnoloogia alusel valmistatud toodangu reprodutseeritavad omadused.
Optika ja optikamõõteriistad. Laserid ja laseriga seonduvad seadmed. Sõnastik ja sümbolid
Hind 180,00Identne EN ISO 11145:2006ja identne ISO 11145:2006
Keel enAsendab EVS-EN ISO 11145:2002EVS-EN ISO 11554:2006
See rahvusvaheline standard määrab kindlaks meetodi pidev- ja impulsslaserite kiirte võimsuse ja energia, samuti nende impulsi kuju, kestuse ja impulsi kordumise kiiruse ajutiste parameetrite määramiseks.
Optika ja optilised mõõteriistad. Laser ja laseriga seonduvad seadmed. Katsemeetodid laserikiire võimsuse, energia ja ajutiste parameetrite määramiseks
Hind 162,00Identne EN ISO 11554:2005ja identne ISO 11554:2005
Keel enAsendab EVS-EN ISO 11554:1999EVS-IEC 60319:2006
Describes the information needed for characterizing reliability of a component, and also the detailed requirements for reporting reliability data. Gives guidance to component users as to how they should specify their reliability requirements to component manufacturers. The data, derived from laboratory tests, should enable circuit and equipment designers to evaluate the reliability of circuits and systems.
Presentation and specification of reliability data for electronic components
Hind 141,00ja identne IEC 60319:1999
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN ISO 11145:2002
See rahvusvaheline standard määratleb lasertehnoloogia valdkonnas põhiterminid, sümbolid ja mõõtühikud, et ühtlustada terminoloogiat ja saavutada selged määratlused ja laserikiire parameetrite korduvkatsed ning lasertehnoloogia alusel valmistatud toodangu reprodutseeritavad omadused.
Optika ja optikamõõteriistad. Laserid ja laseriga seonduvad seadmed. Sõnastik ja sümbolid
Identne EN ISO 11145:2001ja identne ISO 11145:2001
Keel enAsendab EVS-EN ISO 11145:1999Asendatud EVS-EN ISO 11145:2006
EVS-EN ISO 11554:1999
See rahvusvaheline standard määrab kindlaks meetodi pidev- ja impulsslaserite kiirte võimsuse ja energia, samuti nende impulsi kuju, kestuse ja impulsi kordumise kiiruse ajutiste parameetrite määramiseks.
Optika ja optilised mõõteriistad. Laser ja laseriga seonduvad seadmed. Katsemeetodid laserikiire võimsuse, energia ja ajutiste parameetrite määramiseks
Identne EN ISO 11554:1998ja identne ISO 11554:1998
Keel enAsendatud EVS-EN ISO 11554:2006
KAVANDITE ARVAMUSKÜSITLUS
prEN 60749-35
This part of IEC 60749 defines the procedures for performing acoustic microscopy on plastic encapsulated electronic components. This standard provides a guide to the use of acoustic microscopy for detecting anomalies (delamination, cracks, mould-compound voids, etc.) reproducibly and non-destructively in plastic packages.
Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic microscopy for plastic encapsulated electronic components
Identne prEN 60749-35:2006ja identne IEC 60749-35:2006
Keel en
Tähtaeg 29.08.2006
prEN 61076-3-104
This part of IEC 61076 establishes uniform specifications, type testing requirements and quality assessment procedures for 8-way connectors for frequencies up to 1 000 MHz, and intended to be used within cabling for information and communications technology, home entertainment and multimedia. It contains a choice of all test methods and sequences, severity and preferred values for dimensions and characteristics.
Connectors for electronic equipment - Product requirements -- Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz
Identne prEN 61076-3-104:2006ja identne IEC 61076-3-104:2006
Keel en
Tähtaeg 29.08.2006
prEN 61189-6
This part of IEC 61189 is a catalogue of test methods representing methodologies and procedures that can be applied to materials used in manufacturing electronic assemblies.
Test methods for electrical materials, interconnection structures and assemblies -- Part 6: Test methods for materials used in manufacturing electronic assemblies
Identne IEC 61189-6:2006ja identne prEN 61189-6:2006
Keel en
Tähtaeg 29.08.2006
39
33 SIDETEHNIKAUUED STANDARDID
EVS-EN 50310:2006
This European Standard applies to the equipotential bonding inside buildings in which information technology equipment is going to be installed. It contributes to the standardisation of information technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets: a) safety from electrical hazards; b) reliable signal reference within the entire information technology installation; c) satisfactory electromagnetic performance of the entire information technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Hind 171,00Identne EN 50310:2006
Keel enAsendab EVS-EN 50310:2002EVS-EN 55013:2002/A2:2006
Applies to the emission of broadband and narrowband electromagnetic energy which may cause interference to radio reception and which is emitted from: a) vehicles propelled by an internal combustion engine, electrical means, or both; b) boats propelled by an internal combustion engine, electrical means, or both. c) devices equipped with internal combustion engines. This standard includes limits and test methods for both broadband and narrowband emissions. The limits are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1000 MHz when used in a residential environment.
Raadioringhäälingu ja televisioonilevi vastuvõtjad ja kaasseadmed. Raadiohäiringu tunnussuurused. Piirväärtused ja mõõtemeetodid
Hind 53,00Identne EN 55013:2001/A2:2006ja identne CISPR 13:2001/A2:2006
Keel enEVS-EN 300 162-1 V1.4.1:2006
Electromagnetic compatibility and Radio Spectrum Matters (ERM);Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands;Part 1: Technical characteristics and methods of measurement
Hind 233,00Identne EN 300 162-1 V1.4.1:2006
Keel enEVS-EN 300 396-4 V1.3.1:2006
Terrestrial Trunked Radio (TETRA);Technical requirements for Direct Mode Operation (DMO);Part 4: Type 1 repeater air interface
Hind 305,00Identne EN 300 396-4 V1.3.1:2006
Keel enEVS-EN 300 396-5 V1.2.1:2006
Terrestrial Trunked Radio (TETRA);Technical requirements for Direct Mode Operation (DMO);Part 5: Gateway air interface
Hind 402,00Identne EN 300 396-5 V1.2.1:2006
Keel en
EVS-EN 300 468 V1.7.1:2006
Digital Video Broadcasting (DVB);Specification for Service Information (SI) in DVB systems
Hind 305,00Identne EN 300 468 V1.7.1:2006
Keel enEVS-EN 301 033 V1.2.1:2006
Electromagnetic compatibility and Radio spectrum Matters (ERM);Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
Hind 208,00Identne EN 301 033 V1.2.1:2005
Keel enEVS-EN 301 489-11 V1.3.1:2006
Elektromagnetilise ühilduvuse ja raadiospektri küsimused (ERM); Raadioseadmete ja raadiosideteenistuste elektromagnetilise ühilduvuse (EMC) standard; Osa 11: Eritingimused maapealsetele raadioringhäälingu saatjatele
Hind 151,00Identne EN 301 489-11 V1.3.1:2006
Keel enEVS-EN 302 288-1 V1.2.1:2006
Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices;Road Transport and Traffic Telematics (RTTT);Short range radar equipment operating in the 24 GHz range
Hind 208,00Identne EN 302 288-1 V1.2.1:2006
Keel enEVS-EN 302 288-2 V1.2.1:2006
Elektromagnetilise ühilduvuse ja raadiospektri küsimused (ERM); Lähitoimeseadmed; Maanteetranspordi ja liikluse telemaatikaseadmed; Sagedusalas 24 GHz töötavad lähitoime radarseadmed; Osa 2: Harmoneeritud EN R&TTE direktiivi artikli 3.2 põhinõuete alusel
Hind 123,00Identne EN 302 288-2 V1.2.1:2006
Keel enEVS-EN 302 326-2 V1.1.2:2006
Paiksed raadiosidesüsteemid; Mitmikside seadmed ja antennid; Osa 2: Digitaalsete mitmikpunktside raadioseadmete harmoneeritud EN R&TTE direktiivi artikli 3.2 põhinõuete alusel
Hind 246,00Identne EN 302 326-2 V1.1.2:2006
Keel enEVS- ETS 300 002 ed.2:2006
Public Switched Telephone Network (PSTN);Category II specification for 9 600 or 4 800 bits per second duplex modems standardized for use on the PSTN
Hind 246,00Identne ETS 300 002 ed.2 :1996
Keel en
40
EVS ETS 300 007 ed.1:2006
Integrated Services Digital Network (ISDN);Support of packet-mode terminal equipment by an ISDN
Hind 305,00Identne ETS 300 007 ed.1 :1991
Keel enEVS-ETS 300 008 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Message Transfer Part (MTP) to support international interconnection
Hind 151,00Identne ETS 300 008 ed.1:1991
Keel enEVS-ETS 300 008-1 ed.2:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Message Transfer Part (MTP) to support international interconnection;Part 1: Protocol specification [ITU-T Recommendations Q.701 (1993), Q.702 (1988), Q.703 to Q.706 (1993), modified]
Hind 113,00Identne ETSI ETS 300 008-1 ed.2:1997
Keel enEVS-ETS 300 008-2 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Message Transfer Part (MTP) to support international interconnection;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 180,00Identne ETS 300 008-2 ed.1:1997
Keel enEVS-ETS 300 009 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Signalling Connection Control Part (SCCP) [connectionless service] to support international interconnection
Hind 95,00Identne ETS 300 009 ed.1:1991
Keel enEVS-ETS 300 009 ed.2:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Signalling Connection Control Part (SCCP) [connectionless and connection-oriented] to support international interconnection
Hind 199,00Identne ETS 300 009 ed.2:1995
Keel enEVS-ETS 300 009-1 ed.3:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection;Part 1: Protocol specification [ITU-T Recommendations Q.711 to Q.714 and Q.716 (1993), modified]
Hind 190,00Identne ETS 300 009-1 ed.3:1996
Keel en
EVS-ETS 300 009-2 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 180,00Identne ETS 300 009-2 ed.1:1996
Keel enEVS-ETS 300 009-3 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection;Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
Hind 246,00Identne ETS 300 009-3 ed.1:2000
Keel enEVS-ETS 300 010-1 ed.1:2006
Transmission and Multiplexing (TM);Synchronous cross connect equipment;64 kbit/s and n x 64 kbit/s cross connection rate 2 048 kbit/s access ports;Part 1: Core functions and characteristics
Hind 162,00Identne ETS 300 010-1 ed.1:1992
Keel enEVS-ETS 300 010-1 ed.2 :2006
Transmission and Multiplexing (TM);Synchronous cross connect equipment;64 kbit/s and n x 64 kbit/s cross connection rate 2 048 kbit/s access ports;Part 1: Core functions and characteristics
Hind 199,00Identne ETS 300 010-1 ed.2:1995
Keel enEVS-ETS 300 010-2 ed.1:2006
Transmission and Multiplexing (TM);Synchronous cross connect equipment;64 kbit/s and n x 64 kbit/s cross connection rate 2 048 kbit/s access ports;Part 2: Management aspects
Hind 246,00Identne ETS 300 010-2 ed.1:1997
Keel enEVS-ETS 300 011 ed.1 :2006
Integrated Services Digital Network (ISDN);Primary rate user-network interface;Layer 1 specification and test principles
Hind 305,00Identne ETS 300 011ed.1:1992+A1:1994+A2:1996
Keel enEVS-ETS 300 011-1 ed.2:2006
Integrated Services Digital Network (ISDN);Primary rate User-Network Interface (UNI);Part 1: Layer 1 specification
Hind 221,00Identne ETS 300 011-2 ed.2:1998
Keel en
41
EVS-ETS 300 011-2 ed.2:2006
Integrated Services Digital Network (ISDN);Primary rate User-Network Interface (UNI);Part 2: Conformance test specification for interface IA and IB
Hind 208,00Identne ETS 300 011-2 ed.2:1998
Keel enEVS-ETS 300 011-3 ed.2:2006
Integrated Services Digital Network (ISDN);Primary rate User-Network Interface (UNI);Part 3: Implementation Conformance Statement (ICS) and Implementation eXtra Information for Testing (IXIT) proforma specification for interface IA and IB
Hind 180,00Identne ETS 300 011-3 ed.2:1998
Keel enEVS-ETS 300 012 ed.1:2006
Integrated Services Digital Network (ISDN);Basic user-network interface;Layer 1 specification and test principles
Hind 377,00Identne ETS 300 012 ed.1:1992+A1:1994+A2:1996
Keel enEVS-ETS 300 012-1 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 1: Layer 1 specification
Hind 286,00Identne ETS 300 012-1 ed.2:1998
Keel enEVS-ETS 300 012-2 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 2: Implementation Conformance Statement (ICS) and Implementation eXtra Information for Testing (IXIT) specification for interface IA
Hind 162,00Identne ETS 300 012-2 ed.2:1998
Keel enEVS-ETS 300 012-3 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 3: Implementation Conformance Statement (ICS) and Implementation eXtra Information for Testing (IXIT) specification for interface IB
Hind 162,00Identne ETS 300 012-3 ed.2:1998
Keel enEVS-ETS 300 012-4 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 4: Conformance test specification for interface IA
Hind 246,00Identne ETS 300 012-4 ed.2:(1998
Keel enEVS-ETS 300 012-5 ed.2 :2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 5: Conformance test specification for interface IB
Hind 233,00Identne ETS 300 012-5 ed.2:1998
Keel en
EVS-ETS 300 012-6 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 6: Abstract Test Suite (ATS) specification for interface IA
Hind 151,00Identne ETS 300 012-6 ed.2:1998
Keel enEVS-ETS 300 012-7 ed.2:2006
Integrated Services Digital Network (ISDN);Basic User-Network Interface (UNI);Part 7: Abstract Test Suite (ATS) specification for interface IB
Hind 151,00Identne ETS 300 012-7 ed.2 :1998
Keel enEVS-ETS 300 015 ed.1:2006
Terminal Equipment (TE);Basic and recommended additional requirements for terminal equipment supporting Teletex application
Hind 190,00Identne ETS 300 015 ed.1:1994
Keel enEVS-ETS 300 017 ed.1:2006
Terminal Equipment (TE);Test procedures for Teletex
Hind 508,00Identne ETS 300 017 ed.1:1994
Keel enEVS-ETS 300 019-1-0 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-0: Classification of environmental conditions;Introduction
Hind 104,00Identne ETS 300 019-1-0 ed.1:1994
Keel enEVS-ETS 300 019-1-1 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-1: Classification of environmental conditions;Storage
Hind 132,00Identne ETS 300 019-1-1 ed.1:1992
Keel enEVS-ETS 300 019-1-2 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-2: Classification of environmental conditions;Transportation
Hind 123,00Identne ETS 300 019-1-2 ed.1:1992
Keel enEVS-ETS 300 019-1-3 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-3: Classification of environmental conditions;Stationary use at weatherprotected locations
Hind 171,00Identne ETS 300 019-1-3 ed.1:1992+A1 ed.1:1997
Keel en
42
EVS-ETS 300 019-1-4 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-4: Classification of environmental conditions;Stationary use at non-weatherprotected locations
Hind 151,00Identne ETS 300 019-1-4 ed.1:1992+A1:1997
Keel enEVS-ETS 300 019-1-5 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-5: Classification of environmental conditions;Ground vehicle installations
Hind 123,00
Keel enEVS-ETS 300 019-1-6 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-6: Classification of environmental conditions;Ship environments
Hind 123,00Identne ETS 300 019-1-6 ed.1:1992
Keel enEVS-ETS 300 019-1-7 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-7: Classification of environmental conditions;Portable and non-stationary use
Hind 141,00Identne ETS 300 019-1-7 ed.1:1992
Keel enEVS-ETS 300 019-1-8 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 1-8: Classification of environmental conditions;Stationary use at underground locations
Hind 123,00Identne ETS 300 019-1-8 ed.1:1997
Keel enEVS-ETS 300 019-2-0 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-0: Specification of environmental tests;Introduction
Hind 104,00Identne ETS 300 019-2-0 ed.1:1994
Keel enEVS-ETS 300 019-2-1 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-1: Specification of environmental tests;Storage
Hind 151,00Identne ETS 300 019-2-1 ed.1:1994
Keel en
EVS-ETS 300 019-2-2 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-2: Specification of environmental tests;Transportation
Hind 151,00Identne ETS 300 019-2-2 ed.1:1994
Keel enEVS-ETS 300 019-2-3 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-3: Specification of environmental tests;Stationary use at weatherprotected locations
Hind 246,00Identne ETS 300 019-2-3 ed.1:1994+A1:1997+A2:1998
Keel enEVS-ETS 300 019-2-4 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-4: Specification of environmental tests;Stationary use at non-weatherprotected locations
Hind 151,00Identne ETS 300 019-2-4 ed.1:19940+A1:1997
Keel enEVS-ETS 300 019-2-5 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-5: Specification of environmental tests;Ground vehicle installations
Hind 132,00Identne ETS 300 019-2-5 ed.1:1994
Keel enEVS-ETS 300 019-2-6 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-6: Specification of environmental tests;Ship environments
Hind 132,00Identne ETS 300 019-2-6 ed.1:1994
Keel enEVS-ETS 300 019-2-7 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-7: Specification of environmental tests;Portable and non-stationary use
Hind 141,00Identne ETS 300 019-2-7 ed.1:1994
Keel enEVS-ETS 300 019-2-8 ed.1:2006
Equipment Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-8: Specification of environmental tests;Stationary use at underground locations
Hind 113,00Identne ETS 300 019-2-8 ed.1:1997
Keel en
43
EVS-ETS 300 048 ed.1:2006
Integrated Services Digital Network (ISDN);ISDN Packet Mode Bearer Services (PMBS);ISDN Virtual Call (VC) and Permanent Virtual Call (PVC) bearer services provided by the B-channel of the user access - basic and primary rate
Hind 141,00Identne ETS 300 048 ed.1:1992
Keel enEVS-ETS 300 048 ed.2 :2006
Integrated Services Digital Network (ISDN);ISDN Packet Mode Bearer Services (PMBS);ISDN Virtual Call (VC) and Permanent Virtual Circuit (PVC) bearer services provided by the B-channel of the user access - basic and primary rate
Hind 162,00Identne ETS 300 048 ed.2:1997
Keel enEVS-ETS 300 049 ed.1:2006
Integrated Services Digital Network (ISDN);ISDN Packet Mode Bearer Services (PMBS);ISDN Virtual Call (VC) and Permanent Virtual Call (PVC) bearer services provided by the D-channel of the user access - basic and primary rate
Hind 141,00Identne ETS 300 049 ed.1:1992
Keel enEVS-ETS 300 049 ed.2:2006
Integrated Services Digital Network (ISDN);ISDN Packet Mode Bearer Service (PMBS);ISDN Virtual Call (VC) and Permanent Virtual Circuit (PVC) bearer services provided by the D-channel of the user access - basic and primary rate
Hind 171,00Identne ETS 300 049 ed.2 :1997
Keel enEVS-ETS 300 050 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Service Description
Hind 132,00Identne ETS 300 050 ed.1:1991
Keel enEVS-S 300 051 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Functional capabilities and information flows
Hind 141,00Identne ETS 300 051 ed.1:1991
Keel enEVS-ETS 300 052-1 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 123,00Identne ETS 300 052-1 ed.1:1991
Keel en
EVS-ETS 300 052-2 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 052-2 ed.1:1995
Keel enEVS-ETS 300 052-3 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 052-3 ed.1:1996
Keel enEVS-ETS 300 052-4 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 052-4 ed.1:1997
Keel enEVS-ETS 300 052-5 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 113,00Identne ETS 300 052-5 ed.1:1997
Keel enEVS-ETS 300 052-6 ed.1:2006
Integrated Services Digital Network (ISDN);Multiple Subscriber Number (MSN) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 052-6 ed.1:1997
Keel enEVS-ETS 300 053 ed.1:2006
Integrated Services Digital Network (ISDN);Terminal Portability (TP) supplementary service;Service Description
Hind 113,00Identne ETS 300 053 ed.1:1991
Keel enEVS-ETS 300 054 ed.1:2006
Integrated Services Digital Network (ISDN);Terminal Portability (TP) supplementary service;Functional capabilities and information flows
Hind 151,00Identne ETS 300 054 ed.1:1991
Keel en44
EVS-ETS 300 055-1 ed.1:2006
Integrated Services Digital Network (ISDN);Terminal Portability (TP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 104,00Identne ETS 300 055-1 ed.1:1991
Keel enEVS- ETS 300 055-2 ed.1:2006
Integrated Services Digital Network (ISDN);Terminal Portability (TP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 132,00Identne ETS 300 055-2 ed.1:1995
Keel enEVS-ETS 300 056 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Service Description
Hind 151,00Identne ETS 300 056 ed.1:1991+A1:1996
Keel enEVS-ETS 300 058-1 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 141,00Identne ETS 300 058-1 ed.1:1991
Keel enEVS-ETS 300 058-2 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 141,00Identne ETS 300 058-2 ed.1:1995
Keel enEVS-ETS 300 058-3 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 058-3 ed.1:1996
Keel enEVS-ETS 300 058-4 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 058-4 ed.1:1997
Keel en
EVS-ETS 300 058-5 ed.:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 123,00Identne ETS 300 058-5 ed.1:1997
Keel enEVS-ETS 300 058-6 ed.1:2006
Integrated Services Digital Network (ISDN);Call Waiting (CW) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 058-6 ed.1:1997
Keel enEVS-ETS 300 059 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Service Description
Hind 123,00Identne ETS 300 059 ed.1:1991
Keel enEVS-ETS 300 060 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Functional capabilities and information flows
Hind 162,00Identne ETS 300 060 ed.1:1991
Keel enEVS-ETS 300 061-1 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 113,00Identne ETS 300 061-1 ed.1:1991
Keel enEVS-ETS 300 061-2 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 141,00Identne ETS 300 061-2 ed.1:1995
Keel enEVS-ETS 300 061-3 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 061-3 ed.1:1996-
Keel en
45
EVS-ETS 300 061-4 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 061-4 ed.1;1997
Keel enEVS-ETS 300 061-5 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 104,00Identne ETS 300 061-5 ed.1:1997
Keel enEVS-ETS 300 061-6 ed.1:2006
Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 061-6 ed.1:1997
Keel enEVS-ETS 300 062 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Service Description
Hind 113,00Identne ETS 300 062 ed.1:1991
Keel enEVS-ETS 300 063 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Functional capabilities and information flows
Hind 123,00Identne ETS 300 063 ed.1:1991
Keel enEVS-ETS 300 064-1 ed.2:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 113,00Identne ETS 300 064-1 ed.2:1996
Keel enEVS-ETS 300 064-1 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 104,00Identne ETS 300 064-1 ed.1:1991
Keel en
EVS-ETS 300 064-2 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 132,00Identne ETS 300 064-2 ed.1:1995
Keel enEVS-ETS 300 064-3 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 064-3 ed.1:1996
Keel enEVS-ETS 300 064-4 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 064-4 ed.1:1997
Keel enEVS-ETS 300 064-5 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 113,00Identne ETS 300 064-5 ed.1:1997
Keel enEVS-ETS 300 064-6 ed.1:2006
Integrated Services Digital Network (ISDN);Direct Dialling In (DDI) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 064-6 ed.1:1997
Keel enEVS-ETS 300 065 ed.1:2006
Radio Equipment and Systems (RES);Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) Technical characteristics and methods of measurement
Hind 151,00Identne ETS 300 065 ed.1:1992+A1:1998
Keel en
46
EVS-ETS 300 066 ed.1:2006
Radio Equipment and Systems (RES);Float-free maritime satellite Emergency Position Indicating Radio Beacons (EPIRBs) operating on 406,025 MHz;Technical characteristics and methods of measurement
Hind 199,00Identne ETS 300 066 ed.1:1992
Keel enEVS-ETS 300 066 ed.2:2006
Radio Equipment and Systems (RES);Float-free maritime satellite Emergency Position Indicating Radio Beacons (EPIRBs) operating on 406,025 MHz;Technical characteristics and methods of measurement
Hind 233,00Identne ETS 300 066 ed.2:1996
Keel enEVS-ETS 300 067 ed.1:2006
Radio Equipment and Systems (RES);Radiotelex equipment operating in the maritime MF/HF service;Technical Characteristics and methods of measurement
Hind 233,00Identne ETS 300 067 ed.1:1990+A1:1993
Keel enEVS-ETS 300 072 ed.1:2006
Terminal Equipment (TE);Videotex presentation layer protocol;Videotex presentation layer data syntax
Hind 402,00Identne ETS 300 072 ed.1:1990+A1:1996
Keel enEVS-ETS 300 073 ed.1:2006
Videotex presentation layer data syntax;Geometric Display (CEPT Recommendation T/TE 06-02, Edinburgh 1988)
Hind 324,00Identne ETS 300 073 ed.1:1990
Keel enEVS-ETS 300 074 ed.1:2006
Videotex presentation layer data syntax;Transparent data (CEPT Recommendation T/TE 06-03, Edinburgh 1988)
Hind 73,00Identne ETS 300 074 ed.1:1990
Keel enEVS-ETS 300 075 ed.2:2006
Terminal Equipment (TE);Processable data;File transfer
Hind 343,00Identne ETS 300 075 ed.2:1994+A1:1995
Keel enEVS-ETS 300 075 ed.1:2006
Terminal Equipment (TE);Videotex processable data
Hind 358,00Identne ETS 300 075 ed.1:1990
Keel en
EVS-ETS 300 076 ed.1:2006
Terminal Equipment (TE);Videotex Terminal Facility Identifier (TFI)
Hind 104,00Identne ETS 300 076 ed.1:1990
Keel enEVS-ETS 300 076 ed.2:2006
Terminal Equipment (TE);Videotex Terminal Facility Identifier (TFI)
Hind 141,00Identne ETS 300 076 ed.2 :1992
Keel enEVS-ETS 300 076 ed.3:2006
Terminal Equipment (TE);Videotex Terminal Facility Identifier (TFI)
Hind 151,00Identne ETS 300 076 ed.3:1994
Keel enEVS-ETS 300 079 ed.1:2006
Integrated Services Digital Network (ISDN);Syntax-based videotex End-to-end protocols, circuit mode DTE-DTE
Hind 268,00Identne ETS 300 079 ed.1:1991
Keel enEVS-ETS 300 080 ed.1:2006
Integrated Services Digital Network (ISDN);ISDN lower layer protocols for telematic terminals
Hind 246,00Identne ETS 300 080 ed.1:1992
Keel enEVS-ETS 300 081 ed.1:2006
Integrated Services Digital Network (ISDN);Teletex end-to-end protocol over the ISDN
Hind 123,00Identne ETS 300 081 ed.1:1993
Keel enEVS-ETS 300 082 ed.1:2006
Integrated Services Digital Network (ISDN);3,1 kHz telephony teleservice;End-to-end compatibility
Hind 190,00Identne ETS 300 082 ed.1:1992
Keel enevs-ETS 300 083 ed.1:2006
Integrated Services Digital Network (ISDN);Circuit mode structured bearer service category usable for speech information transfer;Terminal requirements for end-to-end compatibility
Hind 104,00Identne ETS 300 083 ed.1:1993
Keel enEVS-ETS 300 084 ed.1:2006
Integrated Services Digital Network (ISDN);Circuit mode structured bearer service category usable for 3,1 kHz audio information transfer;Terminal requirements necessary for end-to-end compatibility
Hind 104,00Identne ETS 300 084 ed.1:1993
Keel en
47
EVS-ETS 300 087 ed.1:2006
Integrated Services Digital Network (ISDN);Facsimile group 4 class 1 equipment on the ISDN;Functional specification of the equipment
Hind 113,00Identne ETS 300 087 ed.1:1994
Keel enEVS-ETS 300 089 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Service description
Hind 132,00Identne ETS 300 089 ed.1:1992
Keel enEVS-ETS 300 090 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Service description
Hind 113,00Identne ETS 300 090 ed.1:1992
Keel enEVS-ETS 300 092-1 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 190,00Identne ETS 300 092-1 ed.1:1992+A1:1993+A2:1994
Keel enEVS-ETS 300 092-2 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 092-2 ed.1:1995
Keel enEVS-ETS 300 092-3 ed.1 :2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 092-3 ed.1:1996
Keel enEVS-ETS 300 092-4 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 171,00Identne ETS 300 092-4 ed.1:1997
Keel en
EVS-ETS 300 092-6 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 092-6 ed.1:1997
Keel enEVS-ETS 300 093-1 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 123,00Identne ETS 300 093-1 ed.1:1992
Keel enEVS-ETS 300 093-2 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 141,00Identne ETS 300 093-2 ed.1:1995
Keel enEVS-ETS 300 093-3 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 104,00Identne ETS 300 093-3 ed.1:1996
Keel enEVS-ETS 300 093-4 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 093-4 ed.1:1997
Keel enEVS-ETS 300 093-5 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 113,00Identne ETS 300 093-5 ed.1:1997
Keel en
48
EVS-ETS 300 093-6 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Restriction (CLIR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 093-6 ed.1:1997
Keel enEVS-ETS 300 094 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Service description
Hind 132,00Identne ETS 300 094 ed.1:1992
Keel enEVS-ETS 300 095 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Service description
Hind 123,00Identne ETS 300 095 ed.1:1992
Keel enEVS-ETS 300 096 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) and Connected Line Identification Restriction (COLR) supplementary services;Functional capabilities and information flows
Hind 208,00Identne ETS 300 096 ed.1:1992
Keel enEVS-ETS 300 097-1 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 171,00Identne ETS 300 097-1 ed.1:1992+A1:1994
Keel enEVS-ETS 300 097-2 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 097-2 ed.1:1995
Keel enEVS-ETS 300 097-3 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 097-3 ed.1:1996
Keel en
EVS-ETS 300 097-4 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 171,00Identne ETS 300 097-4 ed.1:1997
Keel enEVS-ETS 300 097-5 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 123,00Identne ETS 300 097-5 ed.1:1997
Keel enEVS-ETS 300 097-6 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 097-6 ed.1:1997
Keel enEVS-ETS 300 098-1 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 123,00Identne ETS 300 098-1 ed.1:1992
Keel enEVS-ETS 300 098-2 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 132,00Identne ETS 300 098-2 ed.1:1995
Keel enEVS-ETS 300 098-3 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 104,00Identne ETS 300 098-3 ed.1:1996
Keel en
49
EVS-ETS 300 098-4 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 151,00Identne ETS 300 098-4 ed.1:1997
Keel enEVS-ETS 300 098-5 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 113,00Identne ETS 300 098-5 ed.1:1997
Keel enEVS-ETS 300 098-6 ed.1:2006
Integrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 098-6 ed.1:1997
Keel enEVS-ETS 300 099 ed.2:2006
Integrated Services Digital Network (ISDN);Specification of the Packet Handler access point Interface (PHI)
Hind 343,00Identne ETS 300 099 ed.2:1998
Keel enEVS-ETS 300 099 ed.1:2006
Integrated Services Digital Network (ISDN);Specification of the Packet Handler access point Interface (PHI)
Hind 324,00Identne ETS 300 099 ed.1:1992
Keel enEVS-ETS 300 100 ed.1:2006
Integrated Services Digital Network (ISDN);Routing in support of ISUP Version 1 services
Hind 141,00Identne ETS 300 100 ed.1:1992
Keel enEVS-ETS 300 103 ed.1:2006
Integrated Services Digital Network (ISDN);Support of CCITT Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an ISDN Synchronous and asynchronous terminal adaptation functions
Hind 305,00Identne ETS 300 103 ed.1:1990
Keel en
EVS-ETS 300 104 ed.1:2006
Integrated Services Digital Network (ISDN);Attachment requirements for terminal equipment to connect to an ISDN using ISDN basic access Layer 3 aspects (Candidate NET 3, Part 2)
Hind 358,00Identne ETS 300 104 ed.1:1991+A1:1994
Keel enEVS-ETS 300 105 ed.1:2006
Terminal Equipment (TE);International Videotex interworking
Hind 123,00Identne ETS 300 105 ed.1:1991
Keel enEVS-ETS 300 106 ed.1:2006
Terminal Equipment (TE);International Videotex interworking between a terminal and a host
Hind 151,00Identne ETS 300 106 ed.1:1991
Keel enEVS-ETS 300 107 ed.1:2006
Terminal Equipment (TE);International Videotex interworking between gateways
Hind 123,00Identne ETS 300 107 ed.1:1991
Keel enEVS-ETS 300 108 ed.1:2006
Integrated Services Digital Network (ISDN);Circuit-mode 64 kbit/s unrestricted 8 kHz structured bearer service category;Service description
Hind 123,00Identne ETS 300 108 ed.1:1992
Keel enEVS-ETS 300 110 ed.1:2006
Integrated Services Digital Network (ISDN);Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for 3,1 kHz audio information transfer;Service description
Hind 123,00Identne ETS 300 110 ed.1:1992
Keel enEVS-ETS 300 111 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 3,1 kHz teleservice;Service description
Hind 113,00Identne ETS 300 111 ed.1:1992
Keel enEVS-ETS 300 112 ed.1:2006
Integrated Services Digital Network (ISDN);Facsimile group 4 class 1 equipment on the ISDN;End-to-end protocols
Hind 208,00Identne ETS 300 112 ed.1:1994
Keel en
50
EVS-ETS 300 114 ed.1:2006
Attachments to the Public Switched Telephone Network (PSTN);Basic attachment requirements for modems standardized for use on the PSTN (Candidate NET 20)
Hind 246,00Identne ETS 300 114 ed.1:1991
Keel enEVS-ETS 300 114 ed.2:2006
Public Switched Telephone Network (PSTN);Basic Category I and Category II specifications for modems standardized for use on the PSTN
Hind 246,00Identne ETS 300 114 ed.2 :1996
Keel enEVS-ETS 300 115 ed.2:2006
Public Switched Telephone Network (PSTN);Category II specification for 300 bit/s duplex modems standardized for use on the PSTN
Hind 141,00Identne ETS 300 115 ed.2:1997
Keel enEVS-ETS 300 115 ed.1:2006
Attachments to the Public Switched Telephone Network (PSTN);Category II attachment requirements for 300 bits per second duplex modems standardized for use on the PSTN (Candidate NET 21)
Hind 141,00Identne ETS 300 115 ed.1:1991
Keel enEVS-ETS 300 120 ed.1:2006
Integrated Services Digital Network (ISDN);Service requirements for telefax group 4
Hind 132,00Identne ETS 300 120 ed.1:1992
Keel enEVS-ETS 300 122-1 ed.1:2006
Integrated Services Digital Network (ISDN);Generic keypad protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 104,00Identne ETS 300 122-1 ed.1:1992
Keel enEVS-ETS 300 122-2 ed.1:2006
Integrated Services Digital Network (ISDN);Generic keypad protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 141,00Identne ETS 300 122-2 ed.1:1996
Keel en
EVS-ETS 300 123 ed.1:2006
Terminal Equipment (TE);Attachment requirements for Data Terminal Equipment (DTE) to connect to Packet Switched Public Data Networks (PSPDN) using CCITT Recommendation X.25 (1984) interface;Requirements applicable to DTEs subscribing to Link Access Procedure Balanced (LAPB) extended (modulo 128) operation
Hind 95,00Identne ETS 300 123 ed.1:1991
Keel enEVS-ETS 300 124 ed.1:2006
Terminal Equipment (TE);Attachment requirements for Data Terminal Equipment (DTE) to connect to Packet Switched Public Data Networks (PSPDN) using CCITT Recommendation X.25 (1984) interface;Requirements applicable to DTEs subscribing to Multilink operation
Hind 151,00Identne ETS 300 124 ed.1:1991
Keel enEVS-ETS 300 125 ed.1:2006
Integrated Services Digital Network (ISDN);User-network interface data link layer specification;Application of CCITT Recommendations Q.920/I.440 and Q.921/I.441
Hind 343,00Identne ETS 300 125 ed.1:1991
Keel enEVS-ETS 300 127 ed.1:2006
Equipment Engineering (EE);Radiated emission testing of physically large telecommunication systems
Hind 162,00Identne ETS 300 127 ed.1:1994
Keel enEVS-ETS 300 128 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Service description
Hind 141,00Identne ETS 300 128 ed.1:1992+ A1:1998
Keel enEVS-ETS 300 129 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Functional capabilities and information flows
Hind 162,00Identne ETS 300 129 ed.1:1992
Keel enEVS-ETS 300 130-1 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 132,00Identne ETS 300 130-1 ed.1:1992
Keel en
51
EVS-ETS 300 130-2 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 141,00Identne ETS 300 130-2 ed.1 :1995
Keel enEVS-ETS 300 130-3 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 130-3 ed.1:1996
Keel enEVS-ETS 300 130-4 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 162,00Identne ETS 300 130-4 ed.1:1996
Keel enEVS-ETS 300 130-5 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 113,00Identne ETS 300 130-5 ed.1:1996
Keel enEVS- ETS 300 130-6 ed.1:2006
Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 180,00Identne ETS 300 130-6 ed.1:1996
Keel enEVS-ETS 300 132-1 ed.1:2006
Equipment Engineering (EE);Power supply interface at the input to telecommunications equipment;Part 1: Operated by alternating current (ac) derived from direct current (dc) sources
Hind 141,00Identne ETS 300 132-1 ed.1:1996
Keel en
EVS-ETS 300 132-2 ed.1:2006
Equipment Engineering (EE);Power supply interface at the input to telecommunications equipment;Part 2: Operated by direct current (dc)
Hind 162,00Identne ETS 300 132-2 ed.1:1996
Keel enEVS-ETS 300 133-1 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 1: General aspects
Hind 162,00Identne ETS 300 133-1 ed.1:1992
Keel enEVS-ETS 300 133-1 ed.2 :2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 1: General aspects
Hind 171,00Identne ETS 300 133-1 ed.2:1997
Keel enEVS-ETS 300 133-2 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 2: Service aspects
Hind 233,00Identne ETS 300 133-2 ed.1:1992+A1:1994
Keel enEVS-ETS 300 133-2 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 2: Service aspects
Hind 268,00Identne ETS 300 133-2 ed.2:1997
Keel enEVS-ETS 300 133-3 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 3: Network aspects
Hind 430,00Identne ETS 300 133-3 ed.1:1992+A1:1994
Keel enEVS- ETS 300 133-3 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 3: Network aspects
Hind 402,00Identne ETS 300 133-3 ed.2:1997
Keel enEVS-ETS 300 133-4 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 4: Air interface specification
Hind 208,00Identne ETS 300 133-4 ed.1:1992+A1:1994
Keel enEVS-ETS 300 133-4 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio Messaging System (ERMES);Part 4: Air interface specification
Hind 199,00Identne ETS 300 133-4 ed.2:1997
Keel en
52
EVS-ETS 300 133-5 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 5: Receiver conformance specification
Hind 221,00Identne ETS 300 133-5 ed.2:1997
Keel enEVS-ETS 300 133-5 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 5: Receiver conformance specification
Hind 221,00Identne ETS 300 133-5 ed.1:1992+A1:1994
Keel enEVS-ETS 300 133-6 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 6: Base station conformance specification
Hind 104,00Identne ETS 300 133-6 ed.1:1992
Keel enEVS-ETS 300 133-6 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 6: Base station conformance specification
Hind 104,00Identne ETS 300 133-6 ed.2:1997
Keel enEVS-ETS 300 133-7 ed.1:2006
Paging Systems (PS);Enhanced Radio MEssage System (ERMES);Part 7: Operations and maintenance aspects
Hind 268,00Identne ETS 300 133-7 ed.1:1992+A1:1994
Keel enEVS-ETS 300 133-7 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 7: Operation and maintenance aspects
Hind 268,00Identne ETS 300 133-7 ed.2 :1997
Keel enEVS-ETS 300 134 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Transaction Capabilities Application Part (TCAP)
Hind 199,00Identne ETS 300 134 ed.1:1992
Keel enEVS-ETS 300 136 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Service description
Hind 132,00Identne ETS 300 136 ed.1:1992
Keel en
EVS-ETS 300 137 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Functional capabilities and information flows
Hind 180,00Identne ETS 300 137 ed.1:1992
Keel enEVS-ETS 300 138-1 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 199,00Identne ETS 300 138-1 ed.1:1992+A1:1996
Keel enEVS-ETS 300 138-2 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 138-2 ed.1:1995
Keel enEVS-ETS 300 138-3 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 113,00Identne ETS 300 138-3 ed.1:1996
Keel enEVS-ETS 300 138-4 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 162,00Identne ETS 300 138-4 ed.1:1997
Keel enEVS-ETS 300 138-5 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 171,00Identne ETS 300 138-5 ed.1:1997
Keel enEVS-ETS 300 138-6 ed.1:2006
Integrated Services Digital Network (ISDN);Closed User Group (CUG) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 138-6 ed.1:1997
Keel en53
EVS-ETS 300 139 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Service description
Hind 123,00Identne ETS 300 139 ed.1:1992
Keel enEVS-ETS 300 140 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Functional capabilities and information flows
Hind 171,00Identne ETS 300 140 ed.1:1992
Keel enEVS-ETS 300 141-1 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 151,00Identne ETS 300 141-1 ed.1:1992
Keel enEVS-ETS 300 141-2 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 141-2 ed.1:1996
Keel enEVS-ETS 300 141-3 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 151,00Identne ETS 300 141-3 ed.1:1996
Keel enEVS-ETS 300 141-4 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 180,00Identne ETS 300 141-4 ed.1:1996
Keel enEVS-ETS 300 141-5 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 132,00Identne ETS 300 141-5 ed.1:1996
Keel en
EVS-ETS 300 141-6 ed.1:2006
Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 141-6 ed.1:1996
Keel enEVS-ETS 300 142 ed.1:2006
Integrated Services Digital Network (ISDN) and other digital telecommunications networks;Line transmission of non-telephone signals;Video codec for audiovisual services at p x 64 kbit/s [ITU-T Recommendation H.261 (1993), modified]
Hind 180,00Identne ETS 300 142 ed.1:1998
Keel enEVS-ETS 300 143 ed.1:2006
Integrated Services Digital Network (ISDN);Audiovisual services Inband signalling procedures for audiovisual terminals using digital channels up to 2 048 kbit/s
Hind 199,00Identne ETS 300 143 ed.1:1994+A1:1996
Keel enEVS-ETS 300 144 ed.1:2006
Integrated Services Digital Network (ISDN);Audiovisual services Frame structure for a 64 kbit/s to 1 920 kbit/s channel and associated syntax for inband signalling
Hind 221,00Identne ETS 300 144 ed.1:1994
Keel enEVS-ETS 300 144 ed.2:2006
Integrated Services Digital Network (ISDN);Audiovisual services;Frame structure for a 64 kbit/s to 1 920 kbit/s channel and associated syntax for inband signalling
Hind 233,00Identne ETS 300 144 ed.2 :1996
Keel enEVS-ETS 300 145 ed.2:2006
Integrated Services Digital Network (ISDN);Audiovisual services;Videotelephone systems and terminal equipment operating on one or two 64 kbit/s channels
Hind 190,00Identne ETS 300 145 ed.2 :1996
Keel enEVS-ETS 300 145 ed.1:2006
Integrated Services Digital Network (ISDN);Audiovisual services Videotelephone systems and terminal equipment operating on one or two 64 kbit/s channels
Hind 162,00Identne ETS 300 145 ed.1:1994
Keel en
54
EVS-ETS 300 147 ed.1:2006
Transmission and Multiplexing (TM);Synchronous Digital Hierarchy (SDH);Multiplexing structure
Hind 104,00Identne ETS 300 147 ed.1:1992
Keel enEVS-ETS 300 147 ed.2:2006
Transmission and Multiplexing (TM);Synchronous Digital Hierarchy (SDH);Multiplexing structure
Hind 113,00Identne ETS 300 147 ed.2:1995
Keel enEVS-ETS 300 147 ed.3:2006
Transmission and Multiplexing (TM);Synchronous Digital Hierarchy (SDH);Multiplexing structure
Hind 132,00Identne ETS 300 147 ed.3:1997
Keel enEVS-ETS 300 149 ed.1:2006
Terminal Equipment (TE);Videotex Audio syntax
Hind 141,00Identne ETS 300 149 ed.1:1992
Keel enEVS-ETS 300 150 ed.1:2006
Transmission and Multiplexing (TM);Protocol suites for Q interfaces for management of transmission systems
Hind 208,00Identne ETS 300 150 ed.1:1992
Keel enEVS-ETS 300 152 ed.1:2006
Radio Equipment and Systems (RES);Maritime Emergency Position Indicating Radio Beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only Technical characteristics and methods of measurement
Hind 132,00Identne ETS 300 152 ed.1:1991
Keel enEVS-ETS 300 171 ed.1:2006
Private Telecommunication Network (PTN);Specification, functional models and information flows;Control aspects of circuit mode basic services
Hind 286,00Identne ETS 300 171 ed.1:1992
Keel enEVS-ETS 300 179 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge: charging information during the call (AOC-D) supplementary service;Service description
Hind 132,00Identne ETS 300 179 ed.1:1992
Keel enEVS-ETS 300 180 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge: charging information at the end of the call (AOC-E) supplementary service;Service description
Hind 132,00Identne ETS 300 180 ed.1:1992
Keel en
EVS-ETS 300 181 ed.1 :2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Functional capabilities and information flows
Hind 221,00Identne ETS 300 181 ed.1:1993
Keel enEVS-ETS 300 182-1 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 208,00Identne ETS 300 182-1 ed.1:1993
Keel enEVS-ETS 300 182-2 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 182-2 ed.1:1995
Keel enEVS-ETS 300 182-3 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 180,00Identne ETS 300 182-3 ed.1:1996
Keel enEVS-ETS 300 182-4 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 171,00Identne ETS 300 182-4 ed.1:1996
Keel enEVS-ETS 300 182-5 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 180,00Identne ETS 300 182-5 ed.1:1996
Keel enEVS-ETS 300 182-6 ed.1:2006
Integrated Services Digital Network (ISDN);Advice of Charge (AOC) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 182-6 ed.1:1996
Keel en55
EVS-ETS 300 184 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Functional capabilities and information flows
Hind 208,00Identne ETS 300 184 ed.1:1993
Keel enEVS-ETS 300 183 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Service description
Hind 162,00Identne ETS 300 183 ed.1:1992+A1:1998
Keel enEVS-ETS 300 185-1 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 246,00Identne ETS 300 185-1 ed.1:1993+A1:1995
Keel enEVS-ETS 300 185-2 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 162,00Identne ETS 300 185-2 ed.1:1995
Keel enEVS-ETS 300 185-3 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 151,00Identne ETS 300 185-3 ed.1:1996
Keel enEVS-ETS 300 185-4 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 180,00Identne ETS 300 185-4 ed.1:1996
Keel en
EVS-ETS 300 185-5 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 151,00Identne ETS 300 185-5 ed.1:1996
Keel enEVS-ETS 300 185-6 ed.1:2006
Integrated Services Digital Network (ISDN);Conference call, add-on (CONF) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 185-6 ed.1:1996
Keel enEVS-ETS 300 186 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Service description
Hind 123,00Identne ETS 300 186 ed.1:1993
Keel enEVS-ETS 300 187 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Functional capabilities and information flows
Hind 171,00Identne ETS 300 187 ed.1:1993
Keel enEVS-ETS 300 188-1 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 199,00Identne ETS 300 188-1 ed.1:1993
Keel enEVS-ETS 300 188-2 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 188-2 ed.1:1995
Keel enEVS-ETS 300 188-3 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 123,00Identne ETS 300 188-3 ed.1:1996
Keel en
56
EVS-ETS 300 188-4 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 171,00Identne ETS 300 188-4 ed.1:1996
Keel enEVS-ETS 300 188-5 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 141,00Identne ETS 300 188-5 ed.1:1996
Keel enEVS-ETS 300 188-6 ed.1:2006
Integrated Services Digital Network (ISDN);Three-Party (3PTY) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 188-6 ed.1:1996
Keel enEVS-ETS 300 189 ed.1:2006
Private Telecommunication Network (PTN);Addressing
Hind 171,00Identne ETS 300 189 ed.1:1992
Keel enEVS-ETS 300 190 ed.1:2006
Private Telecommunication Network (PTN);Signalling at the S-reference point;Generic keypad protocol for the support of supplementary services
Hind 151,00Identne ETS 300 190 ed.1:1992
Keel enEVS-ETS 300 191 ed.1:2006
Private Telecommunication Network (PTN);Signalling at the S-reference point;Identification supplementary services
Hind 171,00Identne ETS 300 191 ed.1:1992
Keel enEVS-ETS 300 192 ed.1:2006
Private Telecommunication Network (PTN);Signalling protocol at the S-reference point;Circuit mode basic services
Hind 246,00Identne ETS 300 192 ed.1:1992+A1:1996
Keel en
EVS-ETS 300 194 ed.1:2006
Satellite Earth Stations and Systems (SES);The interconnection of Very Small Aperture Terminal (VSAT) systems to Packet Switched Public Data Networks (PSPDNs)
Hind 171,00Identne ETS 300 194 ed.1:1995
Keel enEVS-ETS 300 195-1 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 246,00Identne ETS 300 195-1 ed.1:1995
Keel enEVS-ETS 300 195-2 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 151,00Identne ETS 300 195-2 ed.1:1996
Keel enEVS-ETS 300 195-3 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 199,00Identne ETS 300 195-3 ed.1:1997
Keel enEVS-ETS 300 195-4 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 171,00Identne ETS 300 195-4 ed.1:1998
Keel enEVS-ETS 300 195-5 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 268,00Identne ETS 300 195-5 ed.1:1997
Keel en
57
EVS-ETS 300 195-6 ed.1:2006
Integrated Services Digital Network (ISDN);Supplementary service interactions;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 199,00Identne ETS 300 195-6 ed.1:1998
Keel enEVS-ETS 300 196-1 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 305,00Identne ETS 300 196-1 ed.1:1993
Keel enEVS-ETS 300 196-2 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 246,00Identne ETS 300 196-2 ed.1:1996
Keel enEVS-ETS 300 196-3 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 208,00Identne ETS 300 196-3 ed.1:1997
Keel enEVS-ETS 300 196-4 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 180,00Identne ETS 300 196-4 ed.1:1998
Keel enEVS-ETS 300 196-5 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 246,00Identne ETS 300 196-5 ed.1:1997
Keel en
EVS-ETS 300 196-6 ed.1:2006
Integrated Services Digital Network (ISDN);Generic functional protocol for the support of supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 196-6 ed.1:1998
Keel enEVS-ETS 300 198 ed.1:2006
Transmission and Multiplexing (TM);Parameters for radio relay systems for the transmission of digital signals and analogue video signals operating at 23 GHz
Hind 221,00Identne ETS 300 198 ed.1:1994+A1:1997
Keel enEVS-ETS 300 199 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding Busy (CFB) supplementary service;Service description
Hind 162,00Identne ETS 300 199 ed.1:1994
Keel enEVS-ETS 300 200 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding Unconditional (CFU) supplementary service;Service description
Hind 162,00Identne ETS 300 200 ed.1:1994
Keel enEVS-ETS 300 201 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding No Reply (CFNR) supplementary service;Service description
Hind 180,00Identne ETS 300 201 ed.1:1994+A1:1996
Keel enEVS-ETS 300 202 ed.1:2006
Integrated Services Digital Network (ISDN);Call Deflection (CD) supplementary service;Service description
Hind 171,00Identne ETS 300 202 ed.1:1994+A1:1996
Keel enEVS-ETS 300 203 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding Busy (CFB) supplementary service;Functional capabilities and information flows
Hind 233,00Identne ETS 300 203 ed.1:1994
Keel enEVS-ETS 300 204 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding Unconditional (CFU) supplementary service;Functional capabilities and information flows
Hind 233,00Identne ETS 300 204 ed.1:1994
Keel en
58
EVS-ETS 300 205 ed.1:2006
Integrated Services Digital Network (ISDN);Call Forwarding No Reply (CFNR) supplementary service;Functional capabilities and information flows
Hind 246,00Identne ETS 300 205 ed.1:1994
Keel enEVS-ETS 300 206 ed.1:2006
Integrated Services Digital Network (ISDN);Call Deflection (CD) supplementary service;Functional capabilities and information flows
Hind 233,00Identne ETS 300 206 ed.1:1994
Keel enEVS-ETS 300 208 ed.1:2006
Integrated Services Digital Network (ISDN);Freephone (FPH) supplementary service;Service description
Hind 132,00Identne ETS 300 208 ed.1:1996
Keel enEVS-ETS 300 211 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Principles and architecture
Hind 221,00Identne ETS 300 211 ed.1:1992
Keel enEVS-ETS 300 212 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Media access control layer and physical layer specification
Hind 95,00Identne ETS 300 212 ed.1:1992
Keel enEVS-ETS 300 213 ed.1:
Network Aspects (NA);Metropolitan Area Network (MAN);Physical layer convergence procedure for 2,048 Mbit/s
Hind 132,00Identne ETS 300 213 ed.1:1992
Keel enEVS-ETS 300 214 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical layer convergence procedure for 34,386 Mbit/s
Hind 132,00Identne ETS 300 214 ed.1:1992
Keel EnEVS-ETS 300 215 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical layer convergence procedure for 139,264 Mbit/s
Hind 132,00Identne ETS 300 215 ed.1:1992
Keel enEVS-ETS 300 216 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical layer convergence procedure for 155,520 Mbit/s
Hind 141,00Identne ETS 300 216 ed.1:1992
Keel en
EVS-ETS 300 218 ed.1:2006
Integrated Services Digital Network (ISDN);Syntax-based videotex lower layer protocols for ISDN packet mode (CCITT Recommendation X.31 Case A and Case B)
Hind 246,00Identne ETS 300 218 ed.1:1993
Keel enEVS-ETS 300 221 ed.1:2006
Terminal Equipment (TE);Syntax-based videotex protocol;Lower layer protocols using packet mode access over the Public Switched Telephone Network (PSTN)
Hind 151,00Identne ETS 300 221 ed.1:1993
Keel enEVS-ETS 300 222 ed.1:2006
Terminal Equipment (TE);Framework of Videotex terminal protocols
Hind 104,00Identne ETS 300 222 ed.1:1993
Keel enEVS-ETS 300 223 ed.1:2006
Terminal Equipment (TE);Syntax-based videotex protocol;Common end-to-end protocols
Hind 286,00Identne ETS 300 223 ed.1:1993
Keel enEVS-ETS 300 224 ed.1:2006
Radio Equipment and Systems (RES);On-site paging service;Technical and functional characteristics for on-site paging systems, including test methods
Hind 246,00Identne ETS 300 224 ed.1:1994
Keel enEVS-ETS 300 225 ed.2:2006
Radio Equipment and Systems (RES);Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus
Hind 208,00Identne ETS 300 225 ed.2:1997
Keel enEVS-ETS 300 225 ed.3:2006
Radio Equipment and Systems (RES);Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus
Hind 208,00Identne ETS 300 225 ed.3:1998
Keel enEVS-ETS 300 230 ed.2:2006
Radio Equipment and Systems (RES);Land mobile service;Binary Interchange of Information and Signalling (BIIS) at 1 200 bit/s (BIIS 1 200)
Hind 268,00Identne ETS 300 230 ed.2:1996
Keel enEVS-ETS 300 231 ed.1:2006
Television systems;Specification of the domestic video Programme Delivery Control system (PDC)
Hind 286,00Identne ETS 300 231 ed.1:1996
Keel en
59
EVS-ETS 300 231 ed.2 :2006
Television systems;Specification of the domestic video Programme Delivery Control system (PDC)
Hind 286,00Identne ETS 300 231 ed.2:1998
Keel enEVS-ETS 300 232 ed.1:2006
Transmission and Multiplexing (TM);Optical interfaces for equipments and systems relating to the Synchronous Digital Hierarchy [ITU-T Recommendation G.957 (1993), modified]
Hind 113,00Identne ETS 300 232 ed.1:1993+A1:1996
Keel enEVS-ETS 300 233 ed.1:2006
Integrated Services Digital Network (ISDN);Access digital section for ISDN primary rate
Hind 305,00Identne ETS 300 233 ed.1:1994+A1:1995
Keel enEVS-ETS 300 234 ed.1:2006
Transmission and Multiplexing (TM);High capacity digital radio-relay systems carrying 1 x STM-1 signals and operating in frequency bands with about 30 MHz channel spacing and alternated arrangements
Hind 171,00Identne ETS 300 234 ed.1:1995
Keel enEVS-ETS 300 237 ed.2:2006
Private Integrated Services Network (PISN);Specification, functional models and information flows;Name identification supplementary services
Hind 62,00Identne ETS 300 237 ed.2:1996
Keel enEVS-ETS 300 237 ed.1:2006
Private Telecommunication Network (PTN);Specification, functional models and information flows;Name identification supplementary service
Hind 208,00Identne ETS 300 237 ed.1:1993
Keel enEVS-ETS 300 238 ed.1:2006
Private Telecommunication Network (PTN);Inter-exchange signalling protocol;Name identification supplementary services
Hind 162,00Identne ETS 300 238 ed.1:1993
Keel enEVS-ETS 300 238 ed.2:2006
Private Integrated Services Network (PISN);Inter-exchange signalling protocol;Name identification supplementary services [ISO/IEC 13868 (1995) modified]
Hind 62,00Identne ETS 300 238 ed.2:1995
Keel en
EVS-ETS 300 239 ed.1:2006
Private Telecommunication Network (PTN);Inter-exchange signalling protocol;Generic functional protocol for the support of supplementary services
Hind 305,00Identne ETS 300 239 ed.1:1993
Keel enEVS-ETS 300 239 ed.2:2006
Private Integrated Services Network (PISN);Inter-exchange signalling protocol;Generic functional protocol for the support of supplementary services [ISO/IEC 11582 (1995), modified]
Hind 73,00Identne ETS 300 239 ed.2:1995
Keel enEVS-ETS 300 240 ed.1:2006
Private Telecommunication Network (PTN);Signalling at the S-reference point;Generic feature key management protocol for the control of supplementary services
Hind 190,00Identne ETS 300 240 ed.1:1993
Keel enEVS-ETS 300 242 ed.2:2006
Terminal Equipment (TE);Group 3 facsimile equipment
Hind 208,00Identne ETS 300 242 ed.2:1997
Keel enEVS-ETS 300 242 ed.1:2006
Terminal Equipment (TE);Group 3 facsimile equipment
Hind 221,00Identne ETS 300 242 ed.1:1992+A1:1994
Keel enEVS-ETS 300 243-1 ed.1:2006
Terminal Equipment (TE);Programmable Communication Interface (PCI) APPLI/COM for facsimile group 3, facsimile group 4, teletex and telex services;Part 1: CCITT Recommendation T.611 (1992) [modified]
Hind 123,00Identne ETS 300 243-1 ed.1:1995
Keel enEVS-ETS 300 243-2 ed.1:2006
Terminal Equipment (TE);Programmable Communication Interface (PCI) APPLI/COM for facsimile group 3, facsimile group 4, teletex and telex services;Part 2: Conformance testing
Hind 358,00Identne ETS 300 243-2 ed.1:1995
Keel enEVS-ETS 300 248 ed.1:2006
Business Telecommunications (BT);Open Network Provision (ONP) technical requirements;2 048 kbit/s digital unstructured leased line (D2048U) Terminal equipment interface
Hind 190,00Identne ETS 300 248 ed.1:1993+A1:1995
Keel en
60
EVS-ETS 300 249 ed.1:2006
Satellite Earth Stations and Systems (SES);Television Receive-Only (TVRO) equipment used in the Broadcasting Satellite Service (BSS)
Hind 233,00Identne ETS 300 249 ed.1:1993
Keel enEVS-ETS 300 250 ed.1:2006
Television systems;Specification of the D2-MAC/Packet system
Hind 402,00Identne ETS 300 250 ed.1:1993
Keel enEVS-ETS 300 251 ed.1:2006
Network Aspects (NA);Accessibility for 64 kbit/s circuit switched international end-to-end ISDN traffic relations
Hind 113,00Identne ETS 300 251 ed.1:1993
Keel enEVS-ETS 300 253 ed.1:2006
Equipment Engineering (EE);Earthing and bonding of telecommunication equipment in telecommunication centres
Hind 151,00Identne ETS 300 253 ed.1:1995
Keel enEVS-ETS 300 254 ed.1:2006
Satellite Earth Stations and Systems (SES);Land Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC)
Hind 162,00Identne ETS 300 254 ed.1:1994
Keel enEVS-ETS 300 255 ed.1:2006
Satellite Earth Stations and Systems (SES);Land Mobile Earth Stations (LMESs) operating in the 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC)
Hind 171,00Identne ETS 300 255 ed.1:1994
Keel enEVS-ETS 300 256 ed.1:2006
Private Telecommunication Network (PTN);Specification, functional models and information flows;Diversion supplementary services
Hind 246,00Identne ETS 300 256 ed.1:1993
Keel enEVS-ETS 300 256 ed.2:2006
Private Integrated Services Network (PISN);Specification, functional models and information flows;Diversion supplementary services
Hind 73,00Identne ETS 300 256 ed.2:1996
Keel en
EVS-ETS 300 263 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz teleservice;Service description
Hind 151,00Identne ETS 300 263 ed.1:1994+A1:1996
Keel enEVS-ETS 300 267-1 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 233,00Identne ETS 300 267-1 ed.1:1994+A1:1996
Keel enEVS-ETS 300 267-2 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 162,00Identne ETS 300 267-2 ed.1:1996
Keel enEVS-ETS 300 267-3 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 286,00Identne ETS 300 267-3 ed.1:1997
Keel enEVS-ETS 300 267-4 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 180,00Identne ETS 300 267-4 ed.1:1998
Keel enEVS-ETS 300 267-5 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 286,00Identne ETS 300 267-5 ed.1:1998
Keel en
61
EVS-ETS 300 267-6 ed.1:2006
Integrated Services Digital Network (ISDN);Telephony 7 kHz and videotelephony teleservices;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 190,00Identne ETS 300 267-6 ed.1:1998
Keel enEVS-ETS 300 268 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Protocol Implementation Conformance Statement (PICS)
Hind 208,00Identne ETS 300 268 ed.1:1994
Keel enEVS-ETS 300 269 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 2,048 Mbit/s Protocol Implementation Conformance Statement (PICS)
Hind 104,00Identne ETS 300 269 ed.1:1994
Keel enEVS-ETS 300 270 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 34,368 Mbit/s Protocol Implementation Conformance Statement (PICS)
Hind 104,00Identne ETS 300 270 ed.1:1994
Keel enEVS-ETS 300 271 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 139,264 Mbit/s Protocol Implementation Conformance Statement (PICS)
Hind 104,00Identne ETS 300 271 ed.1:1994
Keel enEVS-ETS 300 272 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 155,520 Mbit/s CCITT Recommendations G.707, G.708 and G.709 SDH based systems Protocol Implementation Conformance Statement (PICS)
Hind 104,00Identne ETS 300 272 ed.1:1994
Keel enEVS-ETS 300 273 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Medium Access Control (MAC) layer management
Hind 246,00Identne ETS 300 273 ed.1:1994
Keel en
EVS-ETS 300 274 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Conformance specification for the Medium Access Control (MAC) layer management
Hind 104,00Identne ETS 300 274 ed.1:1994
Keel enEVS-ETS 300 275 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Interconnection of MANs
Hind 162,00Identne ETS 300 275 ed.1:1994
Keel enEVS-ETS 300 276 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 622,080 Mbit/s CCITT Recommendations G.707, G.708 and G.709 SDH based systems
Hind 141,00Identne ETS 300 276 ed.1:1994
Keel enEVS-ETS 300 277 ed.1:2006
Network Aspects (NA);Metropolitan Area Network (MAN);Physical Layer Convergence Procedure (PLCP) for 622,080 Mbit/s CCITT Recommendations G.707, G.708 and G.709 SDH based systems Protocol Implementation Conformance Statement (PICS)
Hind 104,00Identne ETS 300 277 ed.1:1994
Keel enEVS-ETS 300 278 ed.1:2006
Network Aspects (NA);Support of existing services with guaranteed constant bit rate and specified transfer delay on Metropolitan Area Network (MAN)
Hind 199,00Identne ETS 300 278 ed.1:1994
Keel enEVS-ETS 300 280 ed.1:2006
Terminal Equipment (TE);Facsimile group 4 class 1 equipment on the Integrated Services Digital Network (ISDN) Terminal testing
Hind 233,00Identne ETS 300 280 ed.1:1994+A1:1996
Keel enEVS-ETS 300 282 ed.1:2006
Satellite Earth Stations and Systems (SES);Network Control Facilities (NCF) for Land Mobile Earth Stations (LMES) operating in the 1,5/1,6 GHz bands and 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC)
Hind 95,00Identne ETS 300 282 ed.1:1994
Keel enEVS-ETS 300 283 ed.1:2006
Business TeleCommunications (BTC);Planning of loudness rating and echo values for private networks digitally connected to the public network
Hind 113,00Identne ETS 300 283 ed.1:1994
Keel en
62
EVS-ETS 300 284 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Service description
Hind 151,00Identne ETS 300 284 ed.1:1996
Keel enEVS-ETS 300 286-1 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification
Hind 286,00Identne ETS 300 286-1 ed.1:1996
Keel enEVS-ETS 300 286-2 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 190,00Identne ETS 300 286-2 ed.1:1996
Keel enEVS-ETS 300 286-3 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Hind 199,00Identne ETS 300 286-3 ed.1:1997
Keel enEVS-ETS 300 286-4 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
Hind 180,00Identne ETS 300 286-4 ed.1:1998
Keel enEVS-ETS 300 286-5 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 233,00Identne ETS 300 286-5 ed.1:1997
Keel enEVS-ETS 300 286-6 ed.1:2006
Integrated Services Digital Network (ISDN);User-to-User Signalling (UUS) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
Hind 199,00Identne ETS 300 286-6 ed.1:1998
Keel en
EVS-ETS 300 287 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;Transaction Capabilities Application Part (TCAP) version 2
Hind 95,00Identne ETS 300 287 ed.1:1993
Keel enEVS-ETS 300 290 ed.1:2006
Business TeleCommunications (BTC);64 kbit/s digital unrestricted leased line with octet integrity (D64U);Terminal equipment interface
Hind 190,00Identne ETS 300 290 ed.1:1994+A1:1995
Keel enEVS-ETS 300 294 ed.3:2006
Television systems;625-line television Wide Screen Signalling (WSS)
Hind 141,00Identne ETS 300 294 ed.3:1997
Keel enEVS-ETS 300 294 ed.2:2006
Television systems;625-line television Wide Screen Signalling (WSS)
Hind 141,00Identne ETS 300 294 ed.2:1996
Keel enEVS-ETS 300 294 ed.1:2006
Television systems;625-line television Wide Screen Signalling (WSS)
Hind 132,00Identne ETS 300 294 ed.1:1994
Keel enEVS-ETS 300 298-1 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Asynchronous Transfer Mode (ATM);Part 1: B-ISDN ATM functional specification
Hind 123,00Identne ETS 300 298-1 ed.1:1995
Keel enEVS-ETS 300 298-2 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Asynchronous Transfer Mode (ATM);Part 2: B-ISDN ATM layer specification
Hind 141,00Identne ETS 300 298-2 ed.1:1995
Keel enEVS-ETS 300 298-2 ed.2:2006
Broadband Integrated Services Digital Network (B-ISDN);Asynchronous Transfer Mode (ATM);Part 2: B-ISDN ATM layer specification [ITU-T Recommendation I.361 (1995)]
Hind 62,00Identne ETS 300 298-2 ed.2:1996
Keel enEVS-ETS 300 298-1 ed.2:2006
Broadband Integrated Services Digital Network (B-ISDN);Asynchronous Transfer Mode (ATM);Part 1: B-ISDN ATM functional characteristics [ITU-T Recommendation I.150 (1995)]
Hind 62,00Identne ETS 300 298-1 ed.2:1996
Keel en
63
EVS-300 298-3 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Asynchronous Transfer Mode (ATM);Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification
Hind 123,00Identne 300 298-3 ed.1:1998
Keel enEVS-ETS 300 299 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Cell based user network access;Physical layer interfaces for B-ISDN applications
Hind 221,00Identne ETS 300 299 ed.1:1995
Keel enEVS-ETS 300 299 ed.2:2006
Broadband Integrated Services Digital Network (B-ISDN);Cell based user network access for 155 520 kbit/s and 622 080 kbit/s;Physical layer interfaces for B-ISDN applications
Hind 221,00Identne ETS 300 299 ed.2 :1997
Keel enEVS-ETS 300 300 ed.2:2006
Broadband Integrated Services Digital Network (B-ISDN);Synchronous Digital Hierarchy (SDH) based user network access;Physical layer User Network Interfaces (UNI) for 155 520 kbit/s and 622 080 kbit/s Asynchronous Transfer Mode (ATM) B-ISDN applications
Hind 208,00Identne ETS 300 300 ed.2:1997
Keel enEVS-ETS 300 300 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Synchronous Digital Hierarchy (SDH) based user network access;Physical layer interfaces for B-ISDN applications
Hind 221,00Identne ETS 300 300 ed.1:1995
Keel enEVS- ETS 300 301 ed.1:2006
Broadband Integrated Services Digital Network (B-ISDN);Traffic control and congestion control in B-ISDN
Hind 180,00Identne ETS 300 301 ed.1:1995
Keel enEVS-ETS 300 301 ed.2:2006
Broadband Integrated Services Digital Network (B-ISDN);Traffic control and congestion control in B-ISDN [ITU-T Recommendation I.371 (1996)]
Hind 62,00Identne ETS 300 301 ed.2:1997
Keel enEVS-ETS 300 303 ed.1:2006
Integrated Services Digital Network (ISDN);ISDN - Global System for Mobile communications (GSM) Public Land Mobile Network (PLMN) signalling interface
Hind 141,00Identne ETS 300 303 ed.1:1994
Keel en
EVS-ETS 300 304 ed.1:2006
Transmission and Multiplexing (TM);Synchronous Digital Hierarchy (SDH) information model for the Network Element (NE) view
Hind 221,00Identne ETS 300 304 ed.1:1994
Keel enEVS-ETS 300 304 ed.2:2006
Transmission and Multiplexing (TM);Synchronous Digital Hierarchy (SDH);SDH information model for the Network Element (NE) view
Hind 233,00Identne ETS 300 304 ed.2:1997
Keel enEVS-ETS 300 323-1 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 1: Overview
Hind 305,00Identne ETS 300 323-1 ed.1:1994+A1:1995
Keel enEVSETS 300 323-2 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 2: PT Abstract Test Suite (ATS)
Hind 104,00Identne ETS 300 323-2 ed.1:1994
Keel enEVS-ETS 300 323-2 ed.2:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 2: PT Abstract Test Suite (ATS)
Hind 104,00Identne ETS 300 323-2 ed.2:1995
Keel enEVS-ETS 300 323-3 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 3: PT PICS proforma
Hind 324,00Identne ETS 300 323-3 ed.1:1994+A1:1995
Keel enEVS-ETS 300 323-4 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 4: PT PIXIT proforma
Hind 190,00Identne ETS 300 323-4 ed.1:1994
Keel enEVS-ETS 300 323-5 ed.2:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 5: FT Abstract Test Suite (ATS)
Hind 104,00Identne ETS 300 323-5 ed.2:1995
Keel en
64
EVS-ETS 300 323-5 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 5: FT Abstract Test Suite (ATS)
Hind 113,00Identne ETS 300 323-5 ed.1:1994
Keel enEVS-ETS 300 323-6 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 6: FT PICS proforma
Hind 324,00Identne ETS 300 323-6 ed.1:1994+A1:1995
Keel enEVS-ETS 300 323-7 ed.1:2006
Digital Enhanced Cordless Telecommunications (DECT);Public Access Profile (PAP) test specification;Part 7: FT PIXIT proforma
Hind 180,00Identne ETS 300 323-7 ed.1:1994
Keel enEVS-ETS 300 324-1 ed.1:2006
V interfaces at the digital Local Exchange (LE);V5.1 interface for the support of Access Network (AN);Part 1: V5.1 interface specification
Hind 458,00Identne ETS 300 324-1 ed.1:1994+A1:1996
Keel enEVS-ETS 300 324-2 ed.1:2006
V interfaces at the digital Local Exchange (LE);V5.1 interface for the support of Access Network (AN);Part 2: Protocol Implementation Conformance Statement (PICS) proforma
Hind 190,00Identne ETS 300 324-2 ed.1:1994
Keel enEVS-ETS 300 326-1 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Terrestrial Flight Telecommunications System (TFTS);Part 1: Speech services, facilities and requirements
Hind 171,00Identne ETS 300 326-1 ed.2:1998
Keel enEVS-ETS 300 326-2 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Terrestrial Flight Telecommunications System (TFTS);Part 2: Speech services, radio interface
Hind 430,00Identne ETS 300 326-2 ed.2:1998
Keel enEVS-ETS 300 326-3 ed.2:2006
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Terrestrial Flight Telecommunications System (TFTS);Part 3: Speech services, network aspects
Hind 305,00Identne ETS 300 326-3 ed.2 :1998
Keel en
EVS-ETS 300 347-1 ed.1:2006
V interfaces at the digital Local Exchange (LE);V5.2 interface for the support of Access Network (AN);Part 1: V5.2 interface specification
Hind 430,00Identne ETS 300 347-1 ed.1:1994+A1:1997
Keel enEVS-ETS 300 347-2 ed.1:2006
V interfaces at the digital Local Exchange (LE);V5.2 interface for the support of Access Network (AN);Part 2: Protocol Implementation Conformance Statement (PICS) proforma
Hind 208,00Identne ETS 300 347-2 ed.1:1994+A1:1997
Keel enEVS-ETS 300 356-1 ed.1:2006
Integrated Services Digital Network (ISDN);Signalling System No.7;ISDN User Part (ISUP) version 2 for the international interface;Part 1: Basic services [ITU-T Recommendations Q.761 to Q.764 (1993), modified]
Hind 171,00Identne ETS 300 356-1 ed.1:1995
Keel enEVS-ETS 300 601 ed.1:2006
European digital cellular telecommunications system (Phase 2);Interworking between the Public Land Mobile Network (PLMN) and the Circuit Switched Public Data Network (CSPDN) (GSM 09.04)
Hind 123,00Identne ETS 300 601 ed.1:1994
Keel enEVS-ETS 300 602 ed.1:2006
European digital cellular telecommunications system (Phase 2);Interworking between the Public Land Mobile Network (PLMN) and the Packet Switched Public Data Network (PSPDN) for Packet Assembly/Disassembly (PAD) facility access (GSM 09.05)
Hind 151,00Identne ETS 300 602 ed.1:1994
Keel enEVS-ETS 300 603 ed.1:2006
European digital cellular telecommunications system (Phase 2);Interworking between a Public Land Mobile Network (PLMN) and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services (GSM 09.06)
Hind 151,00Identne ETS 300 603 ed.1:1994
Keel enEVS-ETS 300 613 ed.1:2006
Digital cellular telecommunications system (Phase 2) (GSM);Subscriber, Mobile Equipment (ME) and services data administration (GSM 12.02)
Hind 343,00Identne ETS 300 613 ed.1:1996
Keel en
65
EVS-ETS 300 614 ed.1:2006
Digital cellular telecommunications system (Phase 2) (GSM);Security management (GSM 12.03)
Hind 233,00Identne ETS 300 614 ed.1:1996
Keel enEVS-ETS 300 615 ed.1:2006
Digital cellular telecommunications system (Phase 2) (GSM);Performance data measurements (GSM 12.04)
Hind 343,00Identne ETS 300 615 ed.1:1996
Keel enEVS-ETS 300 616 ed.2:2006
Digital cellular telecommunications system (Phase 2) (GSM);Event and call data (GSM 12.05 version 4.3.1)
Hind 305,00Identne ETS 300 616 ed.2 :1998
Keel enEVS-ETS 300 092-5 ed.1:2006
Integrated Services Digital Network (ISDN);Calling Line Identification Presentation (CLIP) supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
Hind 123,00Identne ETS 300 092-5 ed.1:1997
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 50310:2002
This European Standard applies to the bonding network of a building (CBN), the bonding network of the Information Technology equipment (MESH-BN), and the interconnection between these two networks. It contributes to the standardisation of Information Technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets:�a) safety from electrical hazards;�b) reliable signal reference within the entire Information Technology installation;�c) satisfactory electromagnetic performance of the entire Information Technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Identne EN 50310:2000
Keel enAsendatud EVS-EN 50310:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 50290-2-21:2002/prA1
This Part 2-21 of EN 50290 gives specific requirements for PVC insulation compounds used�for communication cables. It is to be read in conjunction with Part 2-20 of EN 50290.
Communication cables Part 2-21: Common design rules and construction PVC insulation compounds
Identne EN 50290-2-21:2001/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-22:2002/prA1
This Part 2-22 of EN 50290 gives specific requirements for PVC sheathing compounds�used for communication cables. It is to be read in conjunction with Part 2-20 of EN 50290.
Communication cables Part 2-22: Common design rules and construction - PVC sheathing compounds
Identne EN 50290-2-22:2001/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-26:2003/prA1
This Part 2-26 of EN 50290 gives specific requirements for halogen free flame retardant insulation compounds used in communication cables.
Communication cables Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds
Identne EN 50290-2-26:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 50290-2-27:2003/prA1
This Part 2-27 of EN 50290 gives specific requirements for halogen free flame retardant thermoplastic sheathing compounds used in communication cables.
Communication cables Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds
Identne EN 50290-2-27:2002/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 300 328 V1.7.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Wideband transmission systems;Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
Identne EN 300 328 V1.7.1:2006
Keel en
Tähtaeg 12.08.2006
EN 300 392-10-16 V1.3.0
Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 10: Supplementary services stage 1;Sub-part 16: Pre-emptive Priority Call (PPC)
Identne EN 300 392-10-16 V1.3.0:2006
Keel en
Tähtaeg 14.08.2006
EN 300 396-2 V1.3.0
Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 2: Radio aspects
Identne EN 300 396-2 V1.3.0:2006
Keel en
Tähtaeg 12.08.2006
EN 301 091-1 V1.3.2
Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices;Road Transport and Traffic Telematics (RTTT);Radar equipment operating in the 76 GHz to 77 GHz range;
Identne EN 302 091-1 V1.3.2:2006
Keel en
Tähtaeg 12.08.2006
66
EN 301 091-2 V1.3.2
Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices;Road Transport and Traffic Telematics (RTTT);Radar equipment operating in the 76 GHz to 77 GHz range;
Identne EN 301 091-2 V1.3.2:2006
Keel en
Tähtaeg 12.08.2006
EN 301 357-1 V1.3.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Cordless audio devices in the range 25 MHz to 2 000 MHz;Part 1: Technical characteristics and test methods
Identne 301 357-1 V1.3.1:2006
Keel en
Tähtaeg 12.08.2006
EN 301 357-2 V1.3.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Cordless audio devices in the range 25 MHz to 2 000 MHz;Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Identne EN 301 357-2 V1.3.1:2006
Keel en
Tähtaeg 12.08.2006
EN 301 449 V1.1.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum base stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive
Identne EN 301 449 V1.1.1:2006
Keel en
Tähtaeg 12.08.2006
EN 301 526 V1.1.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive
Identne EN 301 526 V1.1.1:2006
Keel en
Tähtaeg 12.08.2006
EN 302 194-1 V1.1.2
Electromagnetic compatibility and Radio spectrum Matters (ERM);Navigation radar used on inland waterways: Part 1: Technical characteristics and methods of measurement
Identne EN 302 194-1 V1.1.2:2006
Keel en
Tähtaeg 12.08.2006
EN 302 426 V1.1.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum Repeaters operating in the 450 MHz cellular band (CDMA450) and the 410 MHz, 450 MHz and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive
Identne EN 302 426 V1.1.1:2006
Keel en
Tähtaeg 12.08.2006
prEN 50289-1-17
This Part 1-17 of EN 50289 details the test methods to determine the exogenous crosstalk between cables used in analogue and digital communication systems. These exogenous Crosstalk effects are near end crosstalk (ExNEXT), far end crosstalk (ExFEXT), equal level far end crosstalk (ExEL FEXT) and power sum (PS).
Communication cables - Specifications for test methods Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT
Identne prEN 50289-1-17:2006
Keel en
Tähtaeg 29.08.2006
prEN 60587
This standard describes two test methods for the evaluation of electrical insulating materials for use under severe ambient conditions at power frequencies (45 Hz to 65 Hz) by measurement of the resistance to tracking and erosion, using a liquid contaminant and inclined plane specimens. The two methods are: • Method 1: constant tracking voltage • Method 2: stepwise tracking voltage.
est method for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
Identne prEN 60587:2006ja identne IEC 60587:2006
Keel en
Tähtaeg 29.08.2006
prEN 60958-3 rev
This part of IEC 60958 specifies the consumer application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1.
Digital audio interface Part 3: Consumer applications
Identne prEN 60958-3:2006ja identne IEC 60958-3:2006
Keel enAsendab EVS-EN 60958-3:2003
Tähtaeg 29.08.2006
prEN 61000-6-4
This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in industrial environments as described below. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This Generic EMC emission standard is applicable if no relevant dedicated product or product-family EMC emission standard exists.
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments
Identne prEN 61000-6-4:2006ja identne IEC 61000-6-4:200X
Keel en
Tähtaeg 1.08.2006
67
prEN 61755-2-1
This part of IEC 61755 defines a set of prescribed conditions that must be maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of fibres considering a beam with a Gaussian distribution of light intensity over the considered MFD. Performance grades are classified into four categories for attenuation and return loss measurements.
Fibre optic connector optical interfaces -- Part 2-1: Optical interface standard single mode non-angled physically contacting fibres
Identne IEC 61755-2-1:2006ja identne prEN 61755-2-1:2006
Keel en
Tähtaeg 29.08.2006
prEN 61755-3-1
This part of IEC 61755 defines certain dimensional limits of a 2,5 mm and a 1,25 mm diameter cylindrical zirconia (ZrO2) PC ferrule optical interface to meet specific requirements for fibreto- fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, U, E, and O as defined in IEC 61753-1.
IEC 61755-3-1 Ed. 1.0: Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full irconia PC ferrule, single mode fibre
Identne IEC 61755-3-1:2006ja identne prEN ISO 61755-3-1:2006
Keel en
Tähtaeg 29.08.2006
prEN 61755-3-2
This part of IEC 61755 defines certain dimensional limits of a 2,5 mm and a 1,25mm diameter cylindrical zirconia (ZrO2) 8 degrees angled-PC (APC) ferrule optical interface to meet specific requirements for connecting fibre to fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, U, E and O as defined in IEC 61753-1.
Fibre optic connector optical interfaces -- Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
Identne IEC 61755-3-2:2006ja identne prEN 61755-3-2:2006
Keel en
Tähtaeg 29.08.2006
prEN 61755-3-3
This part of IEC 61755 defines certain dimensional limits that an angled PC endface multifibre rectangular ferrule having two guide-holes for positioning two alignment pins and using typically plastic material with a Young’s modulus of less than 25 GPa has to meet in order to meet specific requirements for fibre-to-fibre interconnections.
Fibre optic connector optical interfaces -- Part 3-3: Optical interface angled PC endface rectangular ferrule, single mode fibres
Identne IEC 61755-3-3:2006ja identne prEN 61755-3-3:2006
Keel en
Tähtaeg 29.08.2006
prEN 61755-3-4
This part of IEC 61755 defines certain dimensional limits that a flat PC endface multifibre rectangular ferrule having two guide-holes for positioning two alignment pins and using typically plastic material with a Young’s modulus of less than 25 GPa has to meet in order to meet specific requirements for fibre-to-fibre interconnections.
Fibre optic connector optical interfaces -- Part 3-4: Optical interface flat PC endface rectangular ferrule, single mode fibres
Identne IEC 61755-3-4:2006ja identne prEN 61755-3-4:2006
Keel en
Tähtaeg 29.08.2006
prEN 61966-2-4
This part of IEC 61966 is applicable to the encoding and communication of YCC colours used in video systems and similar applications by defining encoding transformations for use in defined reference capturing conditions. If actual conditions differ from the reference conditions, additional rendering transformations may be required. Such additional rendering transformations are beyond the scope of this standard.
Multimedia systems and equipment - Colour measurement and management Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC
Identne prEN 61966-2-4:2006ja identne IEC 61966-2-4:2006
Keel en
Tähtaeg 29.08.2006
prEN 62002-1
This part of IEC 62002 is a radio access specification for mobile, portable and hand-held portable devices capable of receiving DVB-T/H services. It includes informative system aspects as well as specifications for minimum RF performance. It covers terminals in three main classes, namely integrated car terminals, portable digital TV sets and hand-held portable convergence terminals. Interoperability with integrated cellular radios is also considered. The specification covers the following areas.
Mobile and portable DVB-T/H radio access Part 1: Interface specification
Identne prEN 62002-1:2006ja identne IEC 62002-1:2005
Keel en
Tähtaeg 29.08.2006
prEN 62002-2
This part of IEC 62002 provides the conformance testing rules and guidelines for equipment built to meet the mobile and portable DVB-T/H radio access interface specification (IEC 62002-1).
Mobile and portable DVB-T/H radio access Part 2: Interface conformance testing
Identne prEN 62002-2:2006ja identne IEC 62002-2:2005
Keel en
Tähtaeg 29.08.2006
68
prEN 62153-4-7
is suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin connectors and cable assemblies.
Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method
Identne IEC 62153-4-7:2006ja identne prEN 62153-4-7:2006
Keel en
Tähtaeg 29.08.2006
35 INFOTEHNOLOOGIA. KONTORISEADMEDUUED STANDARDID
CEN ISO/TS 14822-1:2006
This part of ISO 14822 addresses the passive DSRC issues associated with Medium Range Pre-Information (MRPI) as applied to Traffic and Travel Information (TTI) issued from an information service provider to a suitably equipped moving vehicle. The AID (Application identification) No. for all MRPI Application entities is defined as No. 8 in accordance with ISO 15628.
Traffic and Travel Information - General specifications for medium-range pre-information via dedicated short-range communication - Part 1: Downlink
Hind 233,00Identne CEN ISO/TS 14822-1:2006ja identne ISO/TS 14822-1:2006
Keel enCEN ISO/TS 14907-2:2006
This CEN/ISO Technical Specification describes tests that verify OBU conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906, for EFC applications. After the tests of isolated data items and functions (C.1-C.2), an example is given for testing of a complete EFC transaction (C.3).
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface
Identne CEN ISO/TS 14907-2:2006ja identne ISO/TS 14907-2:2006
Keel en
CEN ISO/TS 18234-1:2006
This Technical Specification provides an introduction and index to the initial set of TPEG applications and specifications. It allows the indexing of new applications as they are added to the TPEG applications family, by defining their Application Identification (AID).
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 1: Introduction, Numbering and Versions
Hind 104,00Identne CEN ISO/TS 18234-1:2006ja identne ISO/TS 18234-1:2006
Keel enCEN ISO/TS 18234-2:2006
This Technical Specification establishes the method of referencing used within a TPEG data-stream to allow a service provider to signal availability of the same service on another bearer channel or similar service data from another service.
Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF)
Hind 199,00Identne CEN ISO/TS 18234-2:2006ja identne ISO/TS 18234-2:2006
Keel enCEN ISO/TS 18234-3:2006
This Technical Specification establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery of information about the availability of the same service on another bearer channel or similar service data from another service provider, directly from service provider to end-users.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application
Hind 199,00Identne CEN ISO/TS 18234-3:2006ja identne ISO/TS 18234-3:2006
Keel enCEN ISO/TS 18234-4:2006
This document establishes the method of delivering Road Traffic Messages within a TPEG service. The TPEG-RTM application is designed to allow the efficient and language independent delivery of road information directly from service provider to end-users. The information provided relates to event and some status information on the road network and on associated infrastructure affecting a road journey. For example, limited information about abnormal operation of links in the network may be included, such as ferries, liftingbridges,etc.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 4: Road Traffic Message (RTM) application
Hind 305,00Identne CEN ISO/TS 18234-4:2006ja identne ISO/TS 18234-4:2006
Keel en
69
CEN ISO/TS 18234-5:2006
This Technical Specification describes the Public Transport Information (PTI) Application, which is intended to cover all modes of public (i.e. collective) transport as well as inter-urban and intra-urban travel. The application is designed to allow the efficient and language independent delivery of public transport information directly from service provider to end-users.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application
Hind 246,00Identne CEN ISO/TS 18234-5:2006ja identne ISO/TS 18234-5:2006
Keel enCEN ISO/TS 18234-6:2006
This Technical Specification establishes the method of location referencing used by TPEG applications such as TPEG-RTM or TPEG-PTI. TPEG applications are specified to contain all the information required by a client TPEG decoder (i.e. Both location referencing and event information), to present all the information intended for the end-user when it was originated by the service provider.
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 6: Location referencing applications
Hind 286,00Identne CEN ISO/TS 18234-6:2006ja identne ISO/TS 18234-6:2006
Keel enCEN/TS 15231:2006
The LONWORKS communication system is widely used in building automation systems for field-level and application-level functions for residential and non-residential controls in lighting, sun protection, HVAC, energy management and security applications. The BACnet communication system is also used in building automation systems for management-level and application-level functions.
Open data communication in building automation, controls and building management - Mapping between Lonworks and BACnet
Hind 190,00Identne CEN/TS 15231:2006
Keel enCLC/TR 62102:2006
This technical report applies to equipment interfaces. These interfaces within the equipment may be connected to telecommunication networks, may form part of the telecommunication network infrastructure or may provide localized transfer of data. This technical report provides guidance on the classification of interfaces in accordance with the circuit types defined in IEC 60950-1 and IEC 60950-21 following an analysis of the telecommunication network characteristics.
Electrical safety – Classification of interfaces for equipment to be connected to information and communications technology networks
Hind 190,00Identne CLC/TR 62102:2006ja identne IEC/TR 62102:2005
Keel enAsendab CLC/TR 62102:2005
CWA 14641:2006
This CWA specifies requirements for a security management system where an organization:a) Needs to demonstrate its ability to consistently provide products that meets security requirements set by law and regulations, requirements from the Secure Printing Industry and customers, and provisions of the risk inventory.b) Aims to enhance customer satisfaction through the effective application of the Security Management system, including processes for continual improvement of the system and the conformity to security requirements set by law and regulations, requirements from the Secure Printing Industry and customers, and results of the risk inventory.
Security management system for secure printing
Hind 132,00Identne CWA 14641:2006
Keel enCWA 15554:2006
This document describes a scheme that provides a model for a harmonised web accessibility quality mark (from now on called “the web accessibility quality mark”). The document is limited to the assessment of web accessibility and excludes other issues related to assessment or standardisation of electronic or internet products and services.
Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark
Hind 132,00Identne CWA 15554:2006
Keel enCWA 15555:2006
Although many of the guidelines presented in this document can be applied to any kind of application profile, the focus here is on application profiles for metadata, more specifically for learning object metadata1. In addition, we will also consider application profiles of other metadata standards, such as for instance the Learner Information Package (LIP)2.
Guidelines and support for building application profiles in e-learning
Hind 151,00Identne CWA 15555:2006
Keel enEVS-EN 50310:2006
This European Standard applies to the equipotential bonding inside buildings in which information technology equipment is going to be installed. It contributes to the standardisation of information technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets: a) safety from electrical hazards; b) reliable signal reference within the entire information technology installation; c) satisfactory electromagnetic performance of the entire information technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Hind 171,00Identne EN 50310:2006
Keel enAsendab EVS-EN 50310:2002
70
EVS-EN 60950-1:2006
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V.
Infotehnikaseadmed. Ohutus. Osa 1: Üldnõuded
Hind 430,00Identne EN 60950-1:2006ja identne IEC 60950-1:2005
Keel enAsendab EVS-EN 60950-1:2002; EVS-EN 60950-1:2002/A11:2004EVS-EN 60950-22:2006
This part of IEC 60950 applies to information technology equipment intended to be installed in an OUTDOOR LOCATION. The requirements for OUTDOOR EQUIPMENT also apply, where relevant, to empty OUTDOOR ENCLOSURES supplied for housing information technology equipment to be installed in an OUTDOOR LOCATION.
Information technology equipment - Safety Part 22: Equipment installed outdoors
Hind 180,00Identne EN 60950-22:2006ja identne IEC 60950-22:2005
Keel enEVS-EN 60950-23:2006
This part of IEC 60950 specifies requirements for information technology equipment (ITE) with self contained data storage systems that contain hazardous moving parts. These data storage systems are typically large enough to permit a person to enter completely, however, the systems also include similar large equipment permitting complete limb or head access to the area containing hazardous moving parts.
Information technology equipment - Safety Part 23: Large data storage equipment
Hind 141,00Identne EN 60950-23:2006ja identne IEC 60950-23:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 50310:2002
This European Standard applies to the bonding network of a building (CBN), the bonding network of the Information Technology equipment (MESH-BN), and the interconnection between these two networks. It contributes to the standardisation of Information Technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets:�a) safety from electrical hazards;�b) reliable signal reference within the entire Information Technology installation;�c) satisfactory electromagnetic performance of the entire Information Technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Identne EN 50310:2000
Keel enAsendatud EVS-EN 50310:2006
EVS-EN 60950-1:2002
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such informa
Infotehnikaseadmed. Ohutus. Osa 1: Üldnõuded
Identne EN 60950-1:2001ja identne IEC 60950-1:2001
Keel enAsendab EVS-EN 60950:2001Asendatud EVS-EN 60950-1:2006EVS-EN 60950-1:2002/A11:2004
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such informa
Infotehnikaseadmed. Ohutus. Osa 1: ÜldnõudedIdentne EN 60950-1:2001/A11:2004
Keel enAsendatud EVS-EN 60950-1:2006
KAVANDITE ARVAMUSKÜSITLUS
prCEN/TS 15531-1
Real-time information may be exchanged between a number of different organisations, or between different systems belonging to the same organisation. Key interfaces include the following:• Between public transport vehicle control centres – generally, for fleet and network management. • Between a control centre and an information provision system – generally, to provide operational information for presentation to the public. • Between information provision systems – generally, sharing information to ensure that publicly available information is complete and comprehensive.
Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework
Identne prCEN/TS 15531-1:2006
Keel en
Tähtaeg 29.08.2006
prCEN/TS 15531-2
SIRI uses a consistent set of general communication protocols to exchange information between client and server. The same pattern of message exchange may be used to implement different specific functional interfaces as sets of concrete message content types.
Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications infrastructure
Identne prCEN/TS 15531-2:2006
Keel en
Tähtaeg 29.08.2006
71
prCEN/TS 15531-3
There are many potential ways for passenger transport operations centres to interact. The approach taken by SIRI is for an open-ended set of standard data structures, carried over a communications channel constructed using one of a small number of specific options.
Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces
Identne prCEN/TS 15531-3:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 9241-151
This International Standard provides recommendations and guidelines for the user-centred design of software user interfaces for World Wide Web applications (in short: Web user interfaces) to increase usability. Web user interfaces address either all Internet users or closed user groups such as the members of an organisation (intranet), customers and/or suppliers of a company (extranet) or other specific communities of users.
Ergonomics of human-system interaction - Part 151: Software ergonomics for World Wide Web user interfaces
Identne prEN ISO 9241-151:2006ja identne ISO/DIS 9241-151:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 21549-5
This draft International Standard establishes a common framework for the content and the structure of identification data held on healthcare data cards. This draft International Standard specifies the basic structure of the data, but does not specify particular data-sets for storage on devices.
Health informatics - Patient healthcard data - Part 5: Identification data
Identne prEN ISO 21549-5:2006ja identne ISO/DIS 21549-5:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 27799
This standard defines guidelines to support the interpretation and implementation in health informatics of ISO/IEC 17799 (Information Technology - Code of practice for information security management) and is a companion to that standard2.
Health informatics - Security management in health using ISO/IEC 17799
Identne prEN ISO 27799:2006ja identne ISO/DIS 27799:2006
Keel en
Tähtaeg 29.08.2006
37 VISUAALTEHNIKAUUED STANDARDID
CWA 14641:2006
This CWA specifies requirements for a security management system where an organization:a) Needs to demonstrate its ability to consistently provide products that meets security requirements set by law and regulations, requirements from the Secure Printing Industry and customers, and provisions of the risk inventory.b) Aims to enhance customer satisfaction through the effective application of the Security Management system, including processes for continual improvement of the system and the conformity to security requirements set by law and regulations, requirements from the Secure Printing Industry and customers, and results of the risk inventory.
Security management system for secure printing
Hind 132,00Identne CWA 14641:2006
Keel enEVS-EN 584-1:2006
The purpose of this standard is to fix the performance of film systems. This standard is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). This standard is intended to assure that the image quality of radiographs – as far as this is influenced by the film system – is in conformity with the requirements of European Standards such as EN 444, EN 1435 and EN 12681.
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
Hind 104,00Identne EN 584-1:2006
Keel enAsendab EVS-EN 584-1:2000
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 584-1:2000
Standardi eesmärk on fikseerida filmisüsteemide tööomadused. Standard on kohaldatav kindlaksmääratud pliiekraanidega kombineeritud filmisüsteemide liigitamisel tööstusliku radiograafia jaoks.
Mittepurustav katsetamine. Tööstuslik radiograafiline film. Osa 1: Tööstusliku radiograafia filmisüsteemide liigitus
Identne EN 584-1:1994
Keel enAsendatud EVS-EN 584-1:2006
72
43 MAANTEESÕIDUKITE EHITUSUUED STANDARDID
CEN ISO/TS 14822-1:2006
This part of ISO 14822 addresses the passive DSRC issues associated with Medium Range Pre-Information (MRPI) as applied to Traffic and Travel Information (TTI) issued from an information service provider to a suitably equipped moving vehicle. The AID (Application identification) No. for all MRPI Application entities is defined as No. 8 in accordance with ISO 15628.
Traffic and Travel Information - General specifications for medium-range pre-information via dedicated short-range communication - Part 1: Downlink
Hind 233,00Identne CEN ISO/TS 14822-1:2006ja identne ISO/TS 14822-1:2006
Keel enCEN ISO/TS 14907-2:2006
This CEN/ISO Technical Specification describes tests that verify OBU conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906, for EFC applications. After the tests of isolated data items and functions (C.1-C.2), an example is given for testing of a complete EFC transaction (C.3).
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface
Identne CEN ISO/TS 14907-2:2006ja identne ISO/TS 14907-2:2006
Keel en
45 RAUDTEETEHNIKAUUED STANDARDID
CLC/TR 50126-3:2006
This document provides guidance on applying the RAM requirements in EN 50126-1 to rolling stock and for dealing with RAM activities during the system life cycle phases from invitation to tender to demonstration in operation only. All references to EN 50126-1 concern the version of 1998.
Railway applications – The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS
Hind 246,00Identne CLC/TR 50126-3:2006
Keel enEVS-EN 13231-1:2006
This European Standard specifies the requirements and tolerances for the acceptance of work associated with plain line on ballasted track for 1 435 mm and wider gauge railways.
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line
Hind 123,00Identne EN 13231-1:2006
Keel en
EVS-EN 13231-2:2006
This European Standard specifies the requirements and tolerances for the acceptance of track work associated with switch and crossing layouts (also includes work on expansion devices) on ballasted track for 1 435 mm and wider gauge railways.
Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track - Switches and crossings
Hind 132,00Identne EN 13231-2:2006
Keel enEVS-EN 13231-3:2006
This part of this European Standard lays down the technical requirements and the measurements to be made for the acceptance of work to re-profile both longitudinally and transversely the heads of railway rails, including the parts of switches and crossings that can be reprofiled.
Railway applications - Track - Acceptance of works - Part 3: Acceptance of rail grinding, milling and planing work in track
Hind 199,00Identne EN 13231-3:2006
Keel enEVS-EN 13232-9:2006
The scope of this part is:- to describe the design process of switches and crossings, and the use of the other parts of this standard; - to define the main criteria to be taken into account during the design of the layout, including the safety and functional dimensions as well as geometrical and material aspects;
Railway applications - Track - Switches and crossings - Part 9: Layouts
Hind 268,00Identne EN 13232-9:2006
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 3155-034
This standard specifies the required characteristics, tests and tooling applicable to male electrical triaxial contacts, size 08, type D, crimp, class R, used in element of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 034: Contacts, electrical, triaxial, size 08, male, type D, crimp, class R - Product standard
Identne prEN 3155-034:2006
Keel en
Tähtaeg 29.08.2006
73
prEN 50155 rev
Käesolev Euroopa standard kehtib raudtee veeremile paigaldatud juhtimis-, reguleerimis-, kaitse-, toite- jms süsteemide elektroonikaseadmete kohta ning on seotud: - veeremil asuva akupatarei või - kontaktsüsteemiga otseselt või kaudselt ühendatud madalpingelise toiteallikaga (trafo, potentsiomeeter, abitoiteallikas). Käesoleva standardi käsitlusalasse ei kuulu elektroonilised jõuahelad, mille kohta kehtib standard EN 50207.
Raudteealased rakendused. Veeremil kasutatavad elektroonikaseadmed
Identne prEN 50155:2006
Keel etAsendab EVS-EN 50155:2002/A1:2003; EVS-EN 50155:2005
Tähtaeg 29.08.2006
prEN 62290-1
This part of IEC 62290 provides an introduction to the standard and deals with the main concepts, the system definition, the principles and the main functions of UGTMS (Urban Guided Transport Management and Command/Control Systems).
Railway applications - Urban guided transport management and command/control systems -- Part 1: System principles and fundamental concepts
Identne prEN 62290-1:2006ja identne IEC 62290-1:2006
Keel en
Tähtaeg 29.08.2006
47 LAEVAEHITUS JA MERE-EHITISEDKAVANDITE ARVAMUSKÜSITLUS
prEN ISO 14509-1 rev
This International Standard specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull, including inboards, stern drives, personal watercraft (PWC) and outboard motors.
Väikelaevad. Lõbusõidulaevade õhu kaudu leviva müra mõõtmine
Identne prEN ISO 14509-1:2006ja identne ISO/DIS 14509-1:2006
Keel enAsendab EVS-EN ISO 14509:2003
Tähtaeg 29.08.2006
49 LENNUNDUS JA KOSMOSETEHNIKAUUED STANDARDID
EVS-EN 2327:2006
This standard specifies the characteristics of lock washers with radial serrations primarily intended for flight control rods. These lock washers are intended to immobilise the rod end in relation to the rod body, whilst allowing a precise positional adjustment.
Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions
Hind 84,00Identne EN 2327:2006
Keel enAsendab EVS-EN 2327:2003EVS-EN 2328:2006
Standard määrab kindlaks trimmerseibide parameetrid lennujuhtimisvarrastele. Need trimmerseibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades E-asendi reguleerimist pöördumisega.
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
Hind 73,00Identne EN 2328:2006
Keel enAsendab EVS-EN 2328:2000EVS-EN 2337:2006
Käesolev standard määrab kindlaks nõutavad parameetrid, ülevaatus- ja testimismeetodid, sobivuse ning vastuvõtutingimused siledatele liigendliugelaagritele, mis on konstrueeritud taluma staatilisi koormusi ja oluliste kääneteta koormusi.
Lennunduse ja kosmonautika seeria. Siledad liigendliugelaagrid. Tehnilised andmed
Hind 151,00Identne EN 2337:2006
Keel enAsendab EVS-EN 2337:2000EVS-EN 2546:2006
Standard määrab kindlaks korrosioonikindlast terasest, radiaalrihveldusega esmaselt lennujuhtimisvarrastele mõeldud lukustusseibide parameetrid. Need seibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades täpset asendi reguleerimist.
Lennunduse ja kosmonautika seeria. Korrosioonikindlast terasest, radiaalrihveldusega lukustusseibid. Mõõtmed
Hind 84,00Identne EN 2546:2006
Keel enAsendab EVS-EN 2546:2000
74
EVS-EN 2549:2006
See standard määrab kindlaks selliste poltide parameetrid, millel on tavaline kuuskantpea, väikese tolerantsiga normaalvarb, lühike keere, mis on titaanisulamist, anodeeritud ja MoS2-ga määritud. Liigitus: 1100 MPa / 315 °C.
Lennunduse ja kosmonautika seeria. Poldid, millel on tavaline kuuskantpea, väikese tolerantsiga normaalvarb, lühike keere, mis on titaanisulamist, anodeeritud ja MoS2-ga määritud. Liigitus: 1100 MPa (õhutemperatuuril)/315 °C
Hind 95,00Identne EN 2549:2006
Keel enAsendab EVS-EN 2549:2000EVS-EN 2588:2006
Standard määrab kindlaks parameetrid siledatele liigendliugelaagritele: - koostepesadega ja ilma, - määrdeavadega ja ilma, - õlituskanalitega ja ilma, - korrosioonikindlast terasest, ette nähtud kasutamiseks fikseeritud ja liikuvate tarindite elementidel lennukites ja nende juhtimismehhanismides.
Lennunduse ja kosmonautika seeria. Koostepesadega korrosioonikindlast terasest siledad liigendliugelaagrid. Mõõtmed ja koormused
Hind 95,00Identne EN 2588:2006
Keel enAsendab EVS-EN 2588:2000EVS-EN 2596:2006
Standard määrab kindlaks kadmeeritud, korrosioonikindlast terasest radiaalrihveldusega, esmalt lennujuhtimisvarrastele mõeldud lukustusseibide parameetrid. Need lukustusseibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades täpset asendi reguleerimist.
Lennunduse ja kosmonautika seeria. Kadmeeritud, korrosioonikindlast terasest radiaalrihveldusega lukustusseibid. Mõõtmed
Hind 84,00Identne EN 2596:2006
Keel enAsendab EVS-EN 2596:2000EVS-EN 2680:2006
This standard specifies the characteristics of self-locking, floating, self-aligning, two lug anchor nuts, in alloy steel, cadmium plated, MoS2-lubricated, metric series. Classification: 900 MPa 1) / 235 °C 2)
Aerospace series - Nuts, anchor, self-locking, floating, selfaligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
Hind 84,00Identne EN 2680:2006
Keel en
EVS-EN 2754:2006
This standard specifies the characteristics of two lug, counterbored, floating anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, the dimensions of which are in conformity with ISO 3209.
Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1 100 MPa/235 °C
Hind 84,00Identne EN 2754:2006
Keel enEVS-EN 2881:2006
This standard specifies the characteristics of self-locking, fuel resistant, sealing, floating, two lug anchor nuts, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated, metric series. Classification: 900 MPa 1) / 120 °C 2)
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 C
Hind 84,00Identne EN 2881:2006
Keel enEVS-EN 3155-005:2006
This standard specifies the required characteristics and tests applicable to female electrical contacts 004, type A, crimp, class T, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-004.
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
Hind 95,00Identne EN 3155-005:2006
Keel enEVS-EN 3155-023:2006
This standard specifies the required characteristics, tests and tooling applicable to rectangular female electrical contacts 023, type A, crimp, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001.
Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard
Hind 104,00Identne EN 3155-023:2006
Keel enEVS-EN 3155-028:2006
This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, shielded, size 16, type D, crimp, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001.
Aerospace series - Electrical contacts used in elements of connection - Part 028: Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Product standard
Hind 104,00Identne EN 3155-028:2006
Keel en75
EVS-EN 3155-045:2006
This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contact is defined in EN 3155-044.
Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard
Hind 84,00Identne EN 3155-045:2006
Keel enEVS-EN 3475-302:2006
This standard specifies a method of performing voltage proof tests on finished cables and cables in course of production. It shall be used together with EN 3475-100.
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
Hind 84,00Identne EN 3475-302:2006
Keel enAsendab EVS-EN 3475-302:2002EVS-EN 3646-003:2006
This standard defines the characteristics of square flange receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flange mounting - Product standard
Hind 84,00Identne EN 3646-003:2006
Keel enEVS-EN 3646-004:2006
This standard defines the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard
Hind 95,00Identne EN 3646-004:2006
Keel enEVS-EN 3646-005:2006
This standard defines the characteristics of hermetic square flange receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
Hind 84,00Identne EN 3646-005:2006
Keel en
EVS-EN 3646-006:2006
This standard defines the characteristics of hermetic jam-nut mounted receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard
Hind 84,00Identne EN 3646-006:2006
Keel enEVS-EN 3646-007:2006
This standard defines the characteristics of hermetic receptacle with round flange attached by welding or brazing in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
Hind 84,00Identne EN 3646-007:2006
Keel enEVS-EN 3646-008:2006
This standard defines the characteristics of plugs in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 008: Plug - Product standard
Hind 84,00Identne EN 3646-008:2006
Keel enEVS-EN 3646-009:2006
This standard defines the characteristics of protective covers for receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard
Hind 84,00Identne EN 3646-009:2006
Keel enEVS-EN 3646-010:2006
This standard defines the characteristics of protective covers for plugs in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard
Hind 84,00Identne EN 3646-010:2006
Keel en
76
EVS-EN 3646-011:2006
This standard defines the characteristics of dummy receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous. It applies to models defined in Table 3. For plugs associated with these dummy receptacles, see EN 3646-008.
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Product standard
Hind 84,00Identne EN 3646-011:2006
Keel enEVS-EN 3708-001:2006
This standard specifies the general characteristics of terminal junction systems for modular interconnection systems as well as test conditions, test programme and groups for quality assurance.
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification
Hind 151,00Identne EN 3708-001:2006
Keel enEVS-EN 3708-002:2006
This standard specifies the general characteristics of terminal junction systems for modular interconnection systems in accordance with EN 3708-001, including versions with sealed or unsealed modules, the interconnection diagrams of which may be different and defined in the product standards.
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification
Hind 73,00Identne EN 3708-002:2006
Keel enEVS-EN 3708-003:2006
This standard specifies a removable version of feedback sealed modules, designed to operate at temperatures between − 55 °C and 175 °C and at a maximum altitude of 21 000 m, constituting a terminal junction system used in modular interconnection systems.
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard
Hind 95,00Identne EN 3708-003:2006
Keel enEVS-EN 3708-004:2006
This standard specifies a removable version of feedback unsealed modules, designed to operate at temperatures between − 55 °C and 175 °C and at a maximum altitude of 13 700 m, constituting a terminal junction system used in modular interconnection systems.
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard
Hind 84,00Identne EN 3708-004:2006
Keel en
EVS-EN 3708-005:2006
This standard specifies the frames, supports and accessories necessary for a terminal junction system for removable feedback modules, sealed and unsealed in accordance with EN 3708-003 and EN 3708-004 and used in modular interconnection systems.
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard
Hind 113,00Identne EN 3708-005:2006
Keel enEVS-EN 3716-001:2006
This standard applies to single-way connectors with triaxial interfaces used in the transmission of digital data, with the two-core shielded cables in accordance with EN 3375-003, EN 3375-004 and EN 3375-005.
Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification
Hind 151,00Identne EN 3716-001:2006
Keel enEVS-EN 3716-002:2006
This standard specifies the conditions of use common to single-way connectors with triaxial interface for transmission of digital data according to EN 3716-001 and gives the list of product standards.
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards
Hind 73,00Identne EN 3716-002:2006
Keel enEVS-EN 3716-003:2006
This standard specifies the requirements and assembly instructions for solder receptacles, with or without braid connection equipped with a male or female contact, used according to EN 3716-002 on cables conforming to EN 3375-003, EN 3375-004 or EN 3375-005.
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard
Hind 104,00Identne EN 3716-003:2006
Keel enEVS-EN 3716-004:2006
This standard specifies the requirements and assembly instructions for solder plugs, with or without braid connection, equipped with a male or female contact, used according to EN 3716-002 on cables conforming to EN 3375-003, EN 3375-004 or EN 3375-005.
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard
Hind 95,00Identne EN 3716-004:2006
Keel en
77
EVS-EN 4008-014:2006
This standard specifies the characteristics for the turret used with the M22520/31 crimping tool to crimp electrical contacts according to EN 4008-002
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 014: Turret for crimping tool M22520/31-01 - Product standard
Hind 73,00Identne EN 4008-014:2006
Keel enEVS-EN 4035:2006
This standard specifies the characteristics of adjustable rod ends with self-aligning double row ball bearing in corrosion resisting steel with reduced internal radial clearance and threaded shank in titanium alloy, designed to withstand only slow rotations and oscillations under load.
Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
Hind 95,00Identne EN 4035:2006
Keel enEVS-EN 4036:2006
This standard specifies the characteristics of adjustable rod ends with self-aligning double row ball bearing with reduced internal radial clearance and threaded shank in corrosion resisting steel, designed to withstand only slow rotations and oscillations under load.
Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
Hind 95,00Identne EN 4036:2006
Keel enEVS-EN 4040:2006
This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel with selflubricating liner, with wide inner ring, for elevated loads at ambient temperature. They are intended for use between fixed or moving parts of the aircraft structure and their control mechanisms. The spherical plain bearings defined in this standard are used from − 55 °C to 163 °C.
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
Hind 95,00Identne EN 4040:2006
Keel enEVS-EN 4111:2006
This standard specifies the requirements which must be met by hand-operated splined wrenches and sockets for aerospace applications.
Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification
Hind 84,00Identne EN 4111:2006
Keel en
EVS-EN 4199-001:2006
This standard specifies the general characteristics of bonding straps with flat or round braided copper or aluminium conductor, and terminal lugs, crimped on both ends, for use on aircraft.
Aerospace series - Bonding straps for aircraft - Part 001: Technical specification
Hind 104,00Identne EN 4199-001:2006
Keel enEVS-EN 4199-002:2006
This standard provides a list of all parts of EN 4199 required for the production of bonding straps for aircraft.
Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard
Hind 62,00Identne EN 4199-002:2006
Keel enEVS-EN 4199-006:2006
This standard defines the required characteristics for round braid copper conductors for round bonding straps in tin plated or nickel plated. It shall be used together with terminal lugs according to EN 3373-004. It shall be used together with EN 4199-001.
Aerospace series - Bonding straps for aircraft - Part 006: Round braid copper conductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C - Product standard
Hind 73,00Identne EN 4199-006:2006
Keel enEVS-EN 4401:2006
This standard specifies the characteristics of lockbolts with protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series, for use in aerospace applications. Classification: 1 100 MPa 1) / 315 °C 2) In both versions, i.e. with and without pintail these lockbolts fulfill the same function when installed and are statically / dynamically equivalent.
Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Hind 84,00Identne EN 4401:2006
Keel enEVS-EN 4402:2006
This standard specifies the characteristics of lockbolts with 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series, for use in aerospace applications.
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Hind 84,00Identne EN 4402:2006
Keel en
78
EVS-EN 4529-001:2006
This standard specifies:- the electrical, mechanical, environmental and dimensional characteristics of sealing plugs used in elements of electrical and optical connection;- the conditions for qualification, acceptance testing and quality assurance; - the test programmes and groups.
Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification
Hind 104,00Identne EN 4529-001:2006
Keel enEVS-EN 4529-002:2006
This standard lists the product standards for sealing plugs for elements of electrical and optical connection covered by technical specification EN 4529-001.
Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards
Hind 73,00Identne EN 4529-002:2006
Keel enEVS-EN 4529-003:2006
This standard specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It shall be used together with EN 4529-001.
Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard
Hind 84,00Identne EN 4529-003:2006
Keel enEVS-EN 4530-001:2006
This standard specifies:- the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection;- the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance;- the test programme and groups.
Aerospace series - Sealing sleeves used in elements of connection - Part 001: Technical specification
Hind 73,00Identne EN 4530-001:2006
Keel enEVS-EN 4530-002:2006
This standard provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.
Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves
Hind 73,00Identne EN 4530-002:2006
Keel enEVS-EN 4617:2006
Aerospace series - Recommended practices for standardising company standards
Hind 113,00Identne EN 4617:2006
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 2327:2003
This standard specifies the characteristics of lock washers with radial serrations primarily intended for flight control rods
Aerospace series. Washers, lock with radial serrations in alloy steel. Dimensions
Identne EN 2327:1987
Keel enAsendatud EVS-EN 2327:2006EVS-EN 2328:2000
Standard määrab kindlaks trimmerseibide parameetrid lennujuhtimisvarrastele. Need trimmerseibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades E-asendi reguleerimist pöördumisega.
Lennunduse ja kosmonautika seeria. Trimmerseibid lennujuhtimisvarrastele. Mõõtmed
Identne EN 2328:1988+AC1:1988
Keel enAsendatud EVS-EN 2328:2006EVS-EN 2337:2000
Käesolev standard määrab kindlaks nõutavad parameetrid, ülevaatus- ja testimismeetodid, sobivuse ning vastuvõtutingimused siledatele liigendliugelaagritele, mis on konstrueeritud taluma staatilisi koormusi ja oluliste kääneteta koormusi.
Lennunduse ja kosmonautika seeria. Siledad liigendliugelaagrid. Tehnilised andmed
Identne EN 2337:1996
Keel enAsendatud EVS-EN 2337:2006EVS-EN 2546:2000
Standard määrab kindlaks korrosioonikindlast terasest, radiaalrihveldusega esmaselt lennujuhtimisvarrastele mõeldud lukustusseibide parameetrid. Need seibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades täpset asendi reguleerimist.
Lennunduse ja kosmonautika seeria. Korrosioonikindlast terasest, radiaalrihveldusega lukustusseibid. Mõõtmed
Identne EN 2546:1988+AC1:1988
Keel enAsendatud EVS-EN 2546:2006EVS-EN 2549:2000
See standard määrab kindlaks selliste poltide parameetrid, millel on tavaline kuuskantpea, väikese tolerantsiga normaalvarb, lühike keere, mis on titaanisulamist, anodeeritud ja MoS2-ga määritud. Liigitus: 1100 MPa / 315 °C.
Lennunduse ja kosmonautika seeria. Poldid, millel on tavaline kuuskantpea, väikese tolerantsiga normaalvarb, lühike keere, mis on titaanisulamist, anodeeritud ja MoS2-ga määritud. Liigitus: 1100 MPa (õhutemperatuuril)/315 °C
Identne EN 2549:1995
Keel enAsendatud EVS-EN 2549:2006
79
EVS-EN 2588:2000
Standard määrab kindlaks parameetrid siledatele liigendliugelaagritele: - koostepesadega ja ilma, - määrdeavadega ja ilma, - õlituskanalitega ja ilma, - korrosioonikindlast terasest, ette nähtud kasutamiseks fikseeritud ja liikuvate tarindite elementidel lennukites ja nende juhtimismehhanismides.
Lennunduse ja kosmonautika seeria. Koostepesadega korrosioonikindlast terasest siledad liigendliugelaagrid. Mõõtmed ja koormused
Identne EN 2588:1988+AC1:1988
Keel enAsendatud EVS-EN 2588:2006EVS-EN 2596:2000
Standard määrab kindlaks kadmeeritud, korrosioonikindlast terasest radiaalrihveldusega, esmalt lennujuhtimisvarrastele mõeldud lukustusseibide parameetrid. Need lukustusseibid on mõeldud otsadetaili liikumatuks muutmiseks varda suhtes, samaaegselt võimaldades täpset asendi reguleerimist.
Lennunduse ja kosmonautika seeria. Kadmeeritud, korrosioonikindlast terasest radiaalrihveldusega lukustusseibid. Mõõtmed
Identne EN 2596:1988+AC1:1988
Keel enAsendatud EVS-EN 2596:2006EVS-EN 3475-302:2002
This standard specifies a method for performing voltage proof tests on finished cables and cables in course of production. It shall be used together with EN 3475-100.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302: Voltage proof test
Identne EN 3475-302:2002
Keel enAsendatud EVS-EN 3475-302:2006
KAVANDITE ARVAMUSKÜSITLUS
prEN 3155-014
This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 014, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-015.
Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard
Identne prEN 3155-014:2006
Keel en
Tähtaeg 29.08.2006
prEN 3155-015
This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-014.
Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard
Identne prEN 3155-015:2006
Keel en
Tähtaeg 29.08.2006
prEN 3155-035
This standard specifies the required characteristics, tests and tooling applicable to female electrical triaxial contacts, size 08, type D, crimp, class R, used in element of connection according to EN 3155-002.
Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard
Identne prEN 3155-035:2006
Keel en
Tähtaeg 29.08.2006
prEN 3299
This standard specifies the characteristics, qualification and acceptance requirements for self-locking shaft-nuts and threaded rings, with right- or left-hand MJ threads, in FE-PA2601, silver-plated, for aerospace applications Temperature class: 450 °C 1) It is applicable whenever referenced.
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
Identne prEN 3299:2006
Keel en
Tähtaeg 29.08.2006
prEN 3375-001
This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
Identne prEN 3375-001:2006
Keel en
Tähtaeg 29.08.2006
prEN 3375-006
This standard specifies the required characteristics of single braid, 78 Ohms, size 24 electrical cable type XM, intended for digital data transmissions.
Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard
Identne prEN 3375-006:2006
Keel en
Tähtaeg 29.08.2006
prEN 3375-007
This standard specifies the required characteristics of double braid, 77 Ohms, size 26 electrical cable type WW, intended for digital data transmissions.
Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
Identne prEN 3375-007:2006
Keel en
Tähtaeg 29.08.2006
80
prEN 3645-003
This standard specifies the characteristics of square flange mounted receptacles in the family of circular electrical connectors with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle square flange mounting - Product standard
Identne prEN 3645-003:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-004
This standard specifies the characteristics of square flange hermetic receptacles in the family of circular electrical connectors with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, hermetic, square flange mounting - Product standard
Identne prEN 3645-004:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-005
This standard specifies the characteristics of round flange hermetic receptacles, mounted by soldering, in the family of circular electrical connectors with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, brasage mounting - Product standard
Identne prEN 3645-005:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-006
This standard specifies the characteristics of protective covers for receptacles in the family of circular electrical connectors with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Protective cover for receptacle - Product standard
Identne prEN 3645-006:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-007
This standard specifies the characteristics of protective covers for plugs in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Protective cover for plug - Product standard
Identne prEN 3645-007:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-008
This standard specifies the characteristics of plugs with shielding rings in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 008: Non release plug with grounding ring - Product standard
Identne prEN 3645-008:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-009
This standard specifies the characteristics of jam nut mounting receptacles in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product standard
Identne prEN 3645-009:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-010
This standard specifies the characteristics of hermetic receptacles with jam nut mounting in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Receptacle, hermetic, round flange, jam nut mounting - Product standard
Identne prEN 3645-010:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-011
This standard specifies the characteristics of releasable plugs with shielding rings, type 1, in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard
Identne prEN 3645-011:2006
Keel en
Tähtaeg 29.08.2006
prEN 3645-012
This standard specifies the characteristics of releasable plugs with shielding rings, type 2, shell size 25 equipped with male contacts, in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 012: Lanyard release plug with grounding fingers - Type 2 - Product standard
Identne prEN 3645-012:2006
Keel en
Tähtaeg 29.08.2006
81
prEN 3645-013
This standard specifies the characteristics of dummy receptacles in the family of circular, electrical connectors, with triple start threaded coupling.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard
Identne prEN 3645-013:2006
Keel en
Tähtaeg 29.08.2006
prEN 3660-009
This product standard defines a range of cable outlets, style J, straight, sealed, light duty, for heat shrinkable boots, (non-conductive or conductive), for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : − 65 °C to 200 °C Class W : − 65 °C to 175 °C Class K : − 65 °C to 260 °C Class R : − 65 °C to 200 °C
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard
Identne prEN 3660-009:2006
Keel en
Tähtaeg 29.08.2006
prEN 3716-005
This standard specifies the requirements and assembly instructions for crimp receptacles, with braid terminaison, having either a male or female contact, used according to EN 3716-002 on cables conforming to EN 3375-003, EN 3375-004 or EN 3375-005.
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard
Identne prEN 3716-005:2006
Keel en
Tähtaeg 29.08.2006
prEN 3716-006
This standard specifies the requirements and assembly instructions for crimp plugs, with braid terminaison, having either a male or female contact, used according to EN 3716-002 on cables conforming to EN 3375-003, EN 3375-004 or EN 3375-005.
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard
Identne prEN 3716-006:2006
Keel en
Tähtaeg 29.08.2006
prEN 3912
This standard specifies the characteristics of pan head bolts with six lobe recess, relieved shank and long thread, in FE-PA92HT, silver plated, for aerospace applications
Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FEPA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C
Identne prEN 3912:2006
Keel en
Tähtaeg 29.08.2006
prEN 3913
This standard specifies the characteristics of short, self-locking, thin wall salvage inserts with silver plated internal thread, in NI-PH2601 (NI-P100HT), for aerospace applications. Maximum test temperature 550 °C.
Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components
Identne prEN 3913:2006
Keel en
Tähtaeg 29.08.2006
prEN 4008-015
This standard specifies the characteristics for the positioner used with M22520/2-01 crimping tool to crimp electrical contact according to EN 4008-002.
Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 015: Positioner for crimping tool M22520/2-01 - Product standard
Identne prEN 4008-015:2006
Keel en
Tähtaeg 29.08.2006
prEN 4008-017
This standard specifies the characteristics for the head used with M22520/4-01 (see MIL-C-22520/4) crimping tool to crimp electrical contact according to EN 4008-002.
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 017: Head for crimping tool M22520/4-01 - Product standard
Identne prEN 4008-017:2006
Keel en
Tähtaeg 29.08.2006
prEN 4075
This standard specifies the characteristics of screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated.
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C
Identne prEN 4075:2006
Keel en
Tähtaeg 29.08.2006
prEN 4108
This standard specifies the characteristics of crow foot wrenches for splined nuts for aerospace applications.
Aerospace series - Wrenches, crow foot, attachment socket, socket drive
Identne prEN 4108:2006
Keel en
Tähtaeg 29.08.2006
prEN 4109
This standard specifies the characteristics of spanner face wrenches for splined nuts for aerospace applications.
Aerospace series - Wrenches, face spanner
Identne prEN 4109:2006
Keel en
Tähtaeg 29.08.2006
82
prEN 4110
This standard specifies the characteristics of open end box wrenches for splined nuts for aerospace applications.
Aerospace series - Wrenches, open end, box
Identne prEN 4110:2006
Keel en
Tähtaeg 29.08.2006
prEN 4158
This standard describes a method of measurement of the electrical resistance of electrically conducting surface coatings on non-conductive parts and samples for aerospace applications. If electrical contact areas are provided, the method is also applicable on electrical conducting layers over coated with non-conducting layers.
Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers
Identne prEN 4158:2006
Keel en
Tähtaeg 29.08.2006
prEN 4302
This standard specifies the characteristics of open ring insert tools for splined nuts for aerospace applications.
Aerospace series - Open ring insert tool, square drive
Identne prEN 4302:2006
Keel en
Tähtaeg 29.08.2006
prEN 4354
This standard specifies the characteristics of drivers, relieved, six lobe recess, for aerospace applications.
Aerospace series - Six lobe recess - Drivers, relieved
Identne prEN 4354:2006
Keel en
Tähtaeg 29.08.2006
prEN 4355
This standard specifies the characteristics of drivers, socket, six lobe recess, for aerospace applications.
Aerospace series - Six lobe recess - Drivers, socket
Identne prEN 4355:2006
Keel en
Tähtaeg 29.08.2006
prEN 4356
This standard specifies the characteristics of drivers, short, six lobe recess, for aerospace applications.
Aerospace series - Six lobe recess - Drivers, short
Identne prEN 4356:2006
Keel en
Tähtaeg 29.08.2006
prEN 4357
This standard specifies the characteristics of drivers, handle, six lobe recess, for aerospace applications.
Aerospace series - Six lobe recess - Drivers, handle
Identne prEN 4357:2006
Keel en
Tähtaeg 29.08.2006
prEN 4358
This standard specifies the characteristics of drivers, double ended, 90°, six lobe recess, for aerospace applications.
Aerospace series - Six lobe recess - Drivers, double ended, 90°
Identne prEN 4358:2006
Keel en
Tähtaeg 29.08.2006
prEN 4359
This standard specifies the characteristics, qualification and acceptance requirements for drivers for installing and removing screws and bolts having six lobe recess internal drive.
Aerospace series - Six lobe recess - Drivers - Technical specification
Identne prEN 4359:2006
Keel en
Tähtaeg 29.08.2006
prEN 4396
This standard specifies the characteristics of self-locking shaft-nuts, in FE-PA92HT, silver plated, chiefly used for axial location of bearing inner rings on shafts. Maximum test temperature of the parts: 450 °C
Aerospace series - Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
Identne prEN 4396:2006
Keel en
Tähtaeg 29.08.2006
prEN 4399
This standard specifies the characteristics of threaded, self-locking rings, in FE-PA92HT, silver plated, chiefly used for axial location of bearing outer rings. Maximum test temperature of the parts: 450 °C.
Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
Identne prEN 4399:2006
Keel en
Tähtaeg 29.08.2006
53 TÕSTE- JA TEISALDUS-SEADMEDUUED STANDARDID
EVS-EN ISO 6165:2006
Standard kehtestab sõnavara ja terminite alluvusjärjestuse (hierarhia), mullatöömasinatele, mis on kavandatud sooritama järgmisi töid: pinnase ja teiste materjalide kaevamine, laadimine, teisaldamine (transport) ning laotamine ja tihendamine (nt teedel ja tammidel, kraavide kaevamisel ja ehitusplatsidel tehtavate tööde käigus).
Mullatöömasinad. Põhitüübid. Sõnavara
Hind 151,00Identne EN ISO 6165:2006ja identne ISO 6165:2006
Keel enAsendab EVS-EN ISO 6165:2003
83
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN ISO 6165:2003
Standard kehtestab sõnavara ja terminite alluvusjärjestuse (hierarhia), mullatöömasinatele, mis on kavandatud sooritama järgmisi töid: pinnase ja teiste materjalide kaevamine, laadimine, teisaldamine (transport) ning laotamine ja tihendamine (nt teedel ja tammidel, kraavide kaevamisel ja ehitusplatsidel tehtavate tööde käigus).
Mullatöömasinad. Põhitüübid. SõnavaraIdentne EN ISO 6165:2002
Keel etAsendab EVS-EN ISO 6165:2000Asendatud EVS-EN ISO 6165:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 818-1:1999/prA1
Standardi EN 818 see osa määrab kindlaks ümarterasest elekterkeevitusega valmistatud, tõstmisotstarbel kasutatavate lühilüliliste kettide ohutusega seotud põhinõuded, mis on nõutavad kettide vastavuseks tehnilistele tingimustele. Standard käsitleb keskmise tolerantsiga kette, mida kasutatakse tõstetroppidena või üldistel tõstmisotstarvetel, ning väikese tolerantsiga kette, mida kasutatakse tõstukite ja muude samalaadsete tõsteseadmete puhul.
Lühikeste lülidega tõstekett. Ohutus. Osa 1: Tehnilistele tingimustele vastavuse põhitingimused
Identne EN 818-1:1996/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 818-2:1999/prA1
See standardi EN 818 osa määrab kindlaks tõstetroppides ja üldistel tõstmisotstarvetel kasutatavate, 8. klassi lühilüliliste miinimumtolerantsiga tõstekettide ohutusnõuded. Need on ümarterasest elekterkeevitusega valmistatud lühilülilised tõsteketid, mis on termotöödeldud, mida on katsetatud ning mis vastavad eelstandardis prEN 818-1 toodud üldistele vastuvõtutingimustele. Standardi EN 818 see osa hõlmab tõstekette nimimõõtmetega 4æ45 mm.
Lühikeste lülidega tõstekett. Ohutus. Osa 2: Keskmise tolerantsiga kett tõstetroppide valmistamiseks. Klass 8
Identne EN 818-2:1996/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 818-3:1999/prA1
This part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 4, of medium tolerance for use in chain slings and for general lifting purposes.
Lühikeste lülidega tõstekett. Ohutus. Osa 3: Keskmise tolerantsiga kett tõstetroppide valmistamiseks. Klass 4
Identne EN 818-3:1999/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 818-4:1999/prA1
See Euroopa standardi osa määrab kindlaks nõuded, mis on seotud ühe-, kahe-, kolme-, neljaharulisest ja otsteta tõsteketist valmistatud tõstetropi ohutuse, hindamis- ja katsemeetoditega, kui tõstetropp on valmistatud: a) mehaanilistelt ühendatud lülidest; b) keevitamisega, kasutades lühilülilist eelstandardi prEN 818 osa 2 nõuetele vastavat keskmise tolerantsiga 8. klassi tõsteketti koos sobivate samasse klassi kuuluvate koostisosadega.
Lühikeste lülidega tõstekett. Ohutus. Osa 4: Tõstetropid. Klass 8
Identne EN 818-4:1996/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 818-5:1999/prA1
This part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance lift�ing chain conforming to prEN 818-3 together with the appropriate range of components of the same grade.
Lühikeste lülidega tõstekett. Ohutus. Osa 5: Tõstetropid. Klass 4
Identne EN 818-5:1999/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 818-6:2000/prA1
This part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4 and 818-5.
Lühikeste lülidega tõstekett. Ohutus. Osa 6: Kett-tropid. Tootja poolt kasutamise ja korrashoiu kohta esitatava informatsiooni spetsifikatsioon
Identne EN 818-6:2000/prA1:2006
Keel en
Tähtaeg 29.08.2006
59 TEKSTIILI- JA NAHATEHNOLOOGIAUUED STANDARDID
CEN/TS 14689:2006
This Technical Specification specifies a method of determining the bagginess of leather together with its creep and stress relaxation properties. It is applicable to all non-rigid leathers. e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather. Leather is a viscoelastic material and, upon removal of any applied force, only a proportion of the extension observed is recovered.
Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation
Hind 84,00Identne CEN/TS 14689:2006
Keel en
84
CEN/TS 15398:2006
This document establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols.� Resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; � textile floor coverings, excluding loose-laid mats; � laminate floor coverings; � floor panels for loose laying.
Resilient, textile and laminate floor coverings - Floor covering standard symbols
Hind 151,00Identne CEN/TS 15398:2006
Keel en
KAVANDITE ARVAMUSKÜSITLUS
EN ISO 12956:1999/prA1
This European Standard specifies a method for the determination of the characteristic size of the opening of a single layer of a geotextile or geotextile-related product using the wet-sieving principle.
Geotekstiil ja samalaadsed tooted. Iseloomuliku avasuuruse määramine
Identne EN ISO 12956:1999/prA1:2006ja identne ISO 12956:1999/DAM 1:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 10321 rev
See standard määrab kindlaks katsemeetodi geotekstiili ja geotekstiilitaoliste toodete ühenduste või õmbluste tõmbeomaduste määramiseks, kasutades riba kogu laiust. Meetod on rakendatav enamiku geotekstiili- ja geotekstiilitaoliste toodete puhul. See on samuti rakendatav geovõrede puhul, kuid materjalinäidise mõõtmeid tuleb muuta.
Geotekstiil. Ühenduste/õmbluste tõmbekatse kogulaiuses
Identne prEN ISO 10321:2006ja identne ISO/DIS 10321:2006
Keel enAsendab EVS-EN ISO 10321:2000
Tähtaeg 29.08.2006
61 RÕIVATÖÖSTUSUUED STANDARDID
EVS-EN 1392:2006
This European Standard specifies the testing of some strength properties of bonds of leather and footwear materials, in stuck-on assemblies using solvent-based and dispersion adhesives, under different conditions. These can be chosen taking into account the different stresses that such bonds are subjected to, depending on the type of footwear.
Naha- ja jalatsimaterjalide liimid. Lahustipõhised ja dispersioonliimid. Katsemeetodid liimimistugevuse mõõtmiseks spetsiaalsetel tingimustel
Hind 123,00Identne EN 1392:2006
Keel enAsendab EVS-EN 1392:2000
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 1392:2000
See standard määrab kindlaks testimismeetodid mõnede tugevusomaduste määramiseks naha- ja jalatsimaterjalide liimühendustes, kui kasutatakse lahustipõhiseid ja dispersioonliime spetsiaalsetel tingimustel. Need võivad olla valitud, arvestades mitmesuguseid pingeid, millele sellised ühendused allutatakse sõltuvalt jalatsitüübist, erinevatel kasutamise välistingimustel.
Naha- ja jalatsimaterjalide liimid. Lahustipõhised ja dispersioonliimid. Katsemeetodid liimimistugevuse mõõtmiseks spetsiaalsetel tingimustel
Identne EN 1392:1998
Keel enAsendatud EVS-EN 1392:2006
65 PÕLLUMAJANDUSUUED STANDARDID
EVS-EN 14185-2:2006
This draft European Standard specifies a high performance liquid chromatographic (HPLC) method for the determination of residues of N-methylcarbamate pesticides in fruits and vegetables and is based on the method of Krause [1].
Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column
Hind 132,00Identne EN 14185-2:2006
Keel enEVS-EN 15055:2006
This draft European Standard specifies a method using high performance liquid chromatography/tandem mass spectrometry (LC-MS/MS) for the determination of the growth regulators chlormequat and mepiquat in non-fatty foods as chlormequat and mepiquat cation, respectively.
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method
Hind 141,00Identne EN 15055:2006
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN 12945 rev
This European Standard specifies two methods for the determination of the neutralizing value (NV) of liming materials. Method A is applicable to all liming materials except silicate liming materials and liming materials with more than 3 % P2O5.
Liming materials - Determination of neutralizing value - Titrimetric methods
Identne prEN 12945:2006
Keel enAsendab EVS-EN 12945:2002
Tähtaeg 29.08.2006
85
prEN 13971 rev
This European Standard specifies a method for the determination of the speed and effectiveness of the neutralizing potential of calcium carbonate and calcium magnesium carbonate liming materials by potentiometric titration with hydrochloric acid.
Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
Identne prEN 13971:2006
Keel enAsendab EVS-EN 13971:2003
Tähtaeg 29.08.2006
prEN 15097
The purpose of this Standard is to describe a localised irrigation hydraulic system and to specify a method to determine the uniformity in water distribution for each installation to be evaluated in the field. This document applies to localised irrigation systems. It does not cover management practices. This paper defines the methodology to be applied in the farm localised irrigation system evaluation.
Irrigation techniques - Localised irrigation - Hydraulic evaluation
Identne prEN 15097:2006
Keel en
Tähtaeg 29.08.2006
prEN 15099-1
This part of this standard provides definitions, functionalities and specifications related to remote monitoring and control for irrigation systems and its elements.
Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1: General considerations
Identne prEN 15099-1:2006
Keel en
Tähtaeg 29.08.2006
67 TOIDUAINETE TEHNOLOOGIAUUED STANDARDID
EVS-EN 646:2006
Standard kirjeldab protseduuri toiduainetega kokkupuutuva värvitud paberi ja kartongi teimimiseks. Esitatud on kaks protseduuri. Protseduur A pikaajalise kontakti jaoks (näiteks toiduainete pakendid) ja protseduur B lühiajalise kontakti jaoks (näiteks salvrätid, köögipaber, majapidamispaber).
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
Hind 84,00Identne EN 646:2006
Keel enAsendab EVS-EN 646:2001
EVS-EN 15054:2006
This draft European Standard specifies a method using high performance liquid chromatography/mass spectrometry (LC-MS) for the determination of the growth regulators chlormequat and mepiquat in non fatty foods as chlormequat and mepiquat cation, respectively.
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method
Hind 132,00Identne EN 15054:2006
Keel en
KAVANDITE ARVAMUSKÜSITLUS
prEN ISO 13366-1 rev
See ISO 13366 osa määrab kindlaks meetodi somaatiliste rakkude arvu määramiseks nii toorpiimas kui ka keemiliselt konservitud piimas. See meetod sobib standardproovide ettevalmistamiseks ja mehhaniseeritud ning automatiseeritud rakulugemisprotseduuride kaliibrimiseks.
Piim. Somaatiliste rakkude arvu määramine. Osa 1: Mikroskoopiline meetod
Identne prEN ISO 13366-1:2006ja identne ISO/DIS 13366-1:2006
Keel enAsendab EVS-EN ISO 13366-1:2000
Tähtaeg 29.08.2006
prEN ISO 15302
This International Standard specifies a method for the determination of benzo[ a]pyrene in crude or refined edible oils and fats by reverse-phase high-performance liquid chromatography (HPLC) using fluorimetric detection in the range from 0,1 µg/kg to 10 µg/kg.
Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method
Identne prEN ISO 15302:2006ja identne ISO 15302:1998
Keel en
Tähtaeg 29.08.2006
prEN ISO 20541
This standard specifies a method for the determination of the nitrate content of milk and milk products by molecular absorption spectrometry after Griess reaction (preceded by enzymatic reduction).
Milk and milk products - Determination of nitrate content - Method using enzymatic reduction and molecular absorption spectrometry after Griess reaction
Identne prEN ISO 20541:2006ja identne ISO/DIS 20541:2006
Keel en
Tähtaeg 29.08.2006
86
71 KEEMILINE TEHNOLOOGIAUUED STANDARDID
CEN/TS 15397:2006
This CEN Technical Specification specifies a method of natural preconditioning for wood specimens treated with a wood preservative either by penetrating processes or by surface application that can be used in conjunction with existing European Standards on testing of the preventive action of wood preservatives against basidiomycetes and/or insects.
Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
Hind 113,00Identne CEN/TS 15397:2006
Keel enEVS-EN 14175-6:2006
This document specifies requirements and type test methods for VAV systems. It also specifies additional requirements to those in EN 14175-2 and additional test methods to those in EN 14175-3 and EN 14175-4 for fume cupboards with VAV systems (VAV fume cupboards).
Fume cupboards - Part 6: Variable air volume fume cupboards
Hind 123,00Identne EN 14175-6:2006
Keel enEVS-EN 15031:2006
This European Standard is applicable to aluminium based coagulants (aluminium sulfate, aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric), aluminium chloride hydroxide sulfate (monomeric), sodium aluminate and polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate) used directly or for the production of formulations for treatment of water for swimming pools.
Chemicals used for treatment of swimming pool water - Aluminium based coagulants
Hind 132,00Identne EN 15031:2006
Keel enEVS-EN 15078:2006
This European Standard is applicable to sulfuric acid used directly or for the production of formulations for the treatment of water for swimming pools. It describes the characteristics and specifies the requirements and the corresponding test methods for sulfuric acid. It gives information on its use for treatment of water for swimming pools. It also determines the rules relating to safe handling and use (see annex B).
Chemicals used for treatment of swimming pool water - Sulfuric acid
Hind 104,00Identne EN 15078:2006
Keel en
73 MÄENDUS JA MAAVARADUUED STANDARDID
EVS-EN 1804-3:2006
This document specifies the safety requirements for hydraulic control devices, including hydraulic valves and their control elements, valve combinations, control systems, pipes and hose assemblies, fittings, shut-off devices, measuring devices, filters, built-in pressure limiting and check valves in legs and rams and water spraying and dust suppression valves when used as specified by the manufacturer or his authorized representative.
Maa-aluste kaevanduste masinad. Hüdroenergial töötavate katusetugede ohutusnõuded. Osa 3: Hüdraulilised juhtsüsteemid
Hind 190,00Identne EN 1804-3:2006
Keel en
75 NAFTA JA NAFTATEHNOLOOGIAUUED STANDARDID
CEN/TS 15359:2006
This Technical Specification specifies a classification system for SRFs and a template for the specification of their properties. SRFs are produced from non-hazardous waste.
Solid recovered fuels - Specifications and classes
Hind 141,00Identne CEN/TS 15359:2006
Keel enCEN/TS 15439:2006
This Technical Specification gives methods for sampling and analysis of tars and particles in order to determine the load of these contaminants in flowing biomass gasification product gases.b
Biomass gasification - Tar and particles in product gases - Sampling and analysis
Hind 208,00Identne CEN/TS 15439:2006
Keel enEVS-EN 12916:2006
This European Standard specifies a test method for the determination of the content of mono-aromatic, diaromatic and tri+-aromatic hydrocarbons in diesel fuels that may contain fatty acid methyl esters (FAME) up to 5 % (V/V) and petroleum distillates in the boiling range from 150 °C to 400 °C.
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
Hind 123,00Identne EN 12916:2006
Keel enAsendab EVS-EN 12916:2000
87
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 12916:2000
This European Standard specifies a method for the determination of the content of mono-aromatic, di-aromatic and tri+- aromatic hydrocarbons in diesel fuels and petroleum distillates boiling in the range 150 °C to 400 °C. The total content of aromatic compounds is calculated from the sum of the corresponding individual hydrocarbon types.
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection.
Identne EN 12916:2000
Keel enAsendatud EVS-EN 12916:2006
KAVANDITE ARVAMUSKÜSITLUS
prEN 15529 rev
This European Standard defines the principal terms concerning derivatives from coal pyrolysis.
Derivatives from coal pyrolysis - Terminology
Identne prEN 15529:2006
Keel enAsendab EVS-EN 12302:2000; EVS-EN 12303:2000; EVS-EN 13847:2001
Tähtaeg 29.08.2006
prEN ISO 10407-2
This part of ISO 10407 specifies procedures for the inspection and testing of used drill stem components. For the purpose of this document, drill stem components include drill pipe body, tool joints, rotary shouldered connections, drill collar, HWDP and the ends of components that make up with them. This part of ISO 10407 has been prepared to address the practices and technology commonly used in inspection.
Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of drill stem elements
Identne prEN ISO 10407-2:2006ja identne ISO/DIS 10407-2:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 13503-2
This part of ISO 13503 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations.
Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
Identne prEN ISO 13503-2:2006ja identne ISO/FDIS 13503-2:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 13503-4
This part of ISO 13503 provides for consistent methodology to measure fluid loss of stimulation and gravel-pack fluid under static conditions. However, the procedure in this part of ISO 13503 excludes fluids that react with porous media.
Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
Identne prEN ISO 13503-4:2006ja identne ISO/FDIS 13503-4:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 19904-1
This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; - production, storage and offloading; - drilling, production, storage and offloading.
Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars
Identne prEN ISO 19904-1:2006ja identne ISO/FDIS 19904-1:2006
Keel en
Tähtaeg 29.08.2006
77 METALLURGIAASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 1057:2000
See Euroopa standard määrab kindlaks proovivõtu, katsetusmeetodite ja tarnetingimuste nõuded vasktorude kohta, mille välisläbimõõt on 6 mm kuni 267 mm (267 mm kaasa arvatud).
Vask ja vasesulamid. Õmbluseta ümmargused vasest vee- ja gaasitorud sanitaarvaldkonnas kasutamiseks ja kütmiseks
Identne EN 1057:1996
Keel enAsendatud EVS-EN 1057:2006
KAVANDITE ARVAMUSKÜSITLUS
prEN 541 rev
See Euroopa standard määrab kindlaks tehnilised kontrolli- ja tarnetingimused, mehaanilised omadused, mõõtmetolerantsid ja teised nõuded nende valtstoodete kohta, mis on saadud deformeeritavast alumiiniumist ja deformeeritavatest alumiiniumisulamitest ning mille paksus on 0,150 mm kuni 0,500 mm. Nimetatud valtstooted on ette nähtud taara, sulgurite, kaante ja katete valmistamiseks.
Alumiinium ja alumiiniumisulamid. Valtstooted taara, sulgurite ja kaante valmistamiseks. Tehnilised nõuded
Identne prEN 541:2006
Keel enAsendab EVS-EN 541:2000
Tähtaeg 29.08.2006
88
prEN ISO 4498 rev
See ISO 4498 standardi osa määrab kindlaks meetodi metallkeraamiliste materjalide kõvaduse teimimiseks. Standard hõlmab: a) kuumtöötlemata paagutatud materjale; b) paagutatud materjale, mis on selliselt töödeldud, et nende kõvadus on vähemalt 5 mm pealispinnast allpool põhiliselt ühtlane
Metallkeraamilised materjalid, välja arvatud kõvasulamid. Näivkõvaduse määramine. Osa 1: Materjalid, mille kõvadus ristlõike ulatuses on põhiliselt ühtlane
Identne prEN ISO 4498:2006ja identne ISO 4498:2005
Keel enAsendab EVS-EN 24498-1:2000
Tähtaeg 29.08.2006
prEN ISO 4507
This International Standard specifies methods for determining the case-hardening depth of carburized or carbonitrided sintered ferrous materials by micro-hardness measurement. The methods are adapted to materials having porosity and only apply to quenched materials.
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
Identne prEN ISO 4507:2006ja identne ISO 4507:2000
Keel en
Tähtaeg 29.08.2006
79 PUIDUTEHNOLOOGIAASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 13329:2000
This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings. It includes a classification system, based on EN 685, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packing. This standard does not specify requirements relating to areas with humidity risks (such as bathrooms, laundry rooms or saunas), it does however apply to domestic kitchens,
Laminate floor coverings - Specifications, requirements and test methods
Identne EN 13329:2000
Keel enAsendatud EVS-EN 13329:2006
KAVANDITE ARVAMUSKÜSITLUS
prEN 942 rev
See standard määrab kindlaks meetodi tisleritöö puidu kvaliteedinäitajate määramiseks ja puidu liigitamiseks välisilme kvaliteedi järgi. Standard kehtib kõigi komplektsete tisleritoodete valmistamisel nagu uksed, aknad, trepid ja ka tisleritoodete üksikosade kohta. Standard hõlmab täispuidust tappliidetega, servliidetega ja liimpuidust tisleritooteid. Puidu omaduste mõju tugevusele ja vastupidavusele ei ole selles standardis käsitletud. Akende ja ustega seotud eriküsimusi on käsitletud asjaomastes standardites.
Timber in joinery - General requirements
Identne prEN 942:2006
Keel enAsendab EVS-EN 942:2000
Tähtaeg 29.08.2006
81 KLAASI- JA KERAAMIKA-TÖÖSTUSUUED STANDARDID
CEN/TS 15418:2006
These guidelines introduce the principles, testing and assessment of corrosion of refractories by liquids (molten metals, metallurgical slags, glasses, fluxes etc.) and describe four commonly used test methods: - Method A: Corrosion testing by the crucible test; - Method B: Corrosion testing by the finger-dip test; - Method C: Corrosion testing by the slag rotary test; - Method D: Corrosion testing by the induction crucible test.
Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids
Hind 141,00Identne CEN/TS 15418:2006
Keel enEVS-EN 623-1:2006
See standardi EN 623 osa kirjeldab kvalitatiivseid meetodit spetsiaalses tehnilises monoliitkeraamikas defektide olemasolu kindlaksmääramiseks värvaine sisseimbumise katsete abil.
Spetsiaalne tehniline keraamika - Monoliitkeraamika - Üldised ja tekstuurilised omadused - Osa 1: Defektide olemasolu kindlaksmääramine värvaine sisseimbumise katsetega
Hind 84,00Identne EN 623-1:2006
Keel enAsendab EVS-EN 623-1:2000EVS-EN 725-4:2006
This European Standard specifies a method for the determination of oxygen contents of 2 % or less in aluminium nitride powder, by XRF analysis.
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
Hind 95,00Identne EN 725-4:2006
Keel en
89
EVS-EN 13022-1:2006
This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in “Structural Sealant Glazing” (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes.
Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
Hind 171,00Identne EN 13022-1:2006
Keel enEVS-EN 13022-2:2006
This European Standard deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building.
Glass in building - Structural sealant glazing - Part 2: Assembly rules
Hind 199,00Identne EN 13022-2:2006
Keel enEVS-EN 15434:2006
This European Standard covers the evaluation of conformity and the factory production control of sealant for the intrinsic capabilities when intended to apply for insulating glass units to assemble there where ultra-violet resistance and/or mechanical resistance (structural use) of the insulating glass edge seal is required:- the required level of resistance to the UV exposure will depend of the degree of exposure to UV radiation with or without protection;
Glass in building - Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
Hind 246,00Identne EN 15434:2006
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 623-1:2000
See standardi EN 623 osa kirjeldab kvalitatiivseid meetodit spetsiaalses tehnilises monoliitkeraamikas defektide olemasolu kindlaksmääramiseks värvaine sisseimbumise katsete abil.
Spetsiaalne tehniline keraamika - Monoliitkeraamika - Üldised ja tekstuurilised omadused - Osa 1: Defektide olemasolu kindlaksmääramine värvaine sisseimbumise katsetega
Identne EN 623-1:1995
Keel enAsendatud EVS-EN 623-1:2006
83 KUMMI- JA PLASTITÖÖSTUSUUED STANDARDID
CEN/TS 15354:2006
This Technical Specification gives a guidance for the characterisation and the designation of extruded and/or calendered, non-reinforced film or sheeting made of plasticized poly(vinyl chloride) (PVC-P). It specifies the corresponding test methods for the assessment of the characteristics. This Technical Specification is applicable to film and sheeting in the range of thickness from 0,05 mm to 1 mm.
Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
Hind 95,00Identne CEN/TS 15354:2006
Keel enEVS-EN 1392:2006
This European Standard specifies the testing of some strength properties of bonds of leather and footwear materials, in stuck-on assemblies using solvent-based and dispersion adhesives, under different conditions. These can be chosen taking into account the different stresses that such bonds are subjected to, depending on the type of footwear.
Naha- ja jalatsimaterjalide liimid. Lahustipõhised ja dispersioonliimid. Katsemeetodid liimimistugevuse mõõtmiseks spetsiaalsetel tingimustel
Hind 123,00Identne EN 1392:2006
Keel enAsendab EVS-EN 1392:2000EVS-EN 15062:2006
This European Standard describes a number of test methods simulating under specified conditions the normal natural ageing of bonds prepared from footwear materials by use of solvent based and dispersion adhesives. It applies to adhesive bonds as part of normal worn and stored footwear in normal practice.
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
Hind 104,00Identne EN 15062:2006
Keel enAsendab EVS-EN 1392:2000
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 1392:2000
See standard määrab kindlaks testimismeetodid mõnede tugevusomaduste määramiseks naha- ja jalatsimaterjalide liimühendustes, kui kasutatakse lahustipõhiseid ja dispersioonliime spetsiaalsetel tingimustel. Need võivad olla valitud, arvestades mitmesuguseid pingeid, millele sellised ühendused allutatakse sõltuvalt jalatsitüübist, erinevatel kasutamise välistingimustel.
Naha- ja jalatsimaterjalide liimid. Lahustipõhised ja dispersioonliimid. Katsemeetodid liimimistugevuse mõõtmiseks spetsiaalsetel tingimustel
Identne EN 1392:1998
Keel enAsendatud EVS-EN 1392:2006
90
KAVANDITE ARVAMUSKÜSITLUS
prEN ISO 3451-1 rev
Käesolev standardi käesolev osa määrab kindlaks põhilised meetodid koos vastavate testimistingimustega plastide sortimendi (vaigud ja segud) tuhasisalduse määramiseks. Väljavalitud täpsed tingimused võivad olla esitatud kõnealuse plasti tehnilistes nõuetes.
Plastid. Tuhasisalduse määramine. Osa 1: Põhilised meetodid
Identne prEN ISO 3451-1:2006ja identne ISO/DIS 3451-1:2006
Keel enAsendab EVS-EN ISO 3451-1:2000
Tähtaeg 29.08.2006
prEN ISO 6401 rev
This International Standard specifies a method for the determination of vinyl chloride monomer in homopolymer and copolymer resins of vinyl chloride and compounded materials. The method is based on sample dissolution and headspace gas chromatography. Concentrations of vinyl chloride in the range 0.1 – 3.0 mg/kg can be determined.
Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
Identne prEN ISO 6401:2006ja identne ISO/DIS 6401:2006
Keel enAsendab EVS-EN ISO 6401:2005
Tähtaeg 29.08.2006
prEN ISO 8988 rev
Käesolev standard määrab kindlaks kaks meetodit heksametüleentetraamiini ("heksa") sisalduse määramiseks fenoolvaikudes. Need kaks meetodit on võrdväärsed. Jaotises 3 kirjeldatud Kjeldhali meetod ei ole rakendatav, kui fenoolvaigus esinevad veel teised lämmastikkusisaldavad ühendid. Jaotises 4 kirjeldatud perkloorhappemeetod on rakendatav ainult siis, kui vaigus ei sisaldu enam teisi aluselisi ega happelisi lisandeid.
Plastid. Fenoolvaigud. Heksametüleentetraamiini sisalduse määramine. Kjeldhali meetod ja perkloorhappemeetod
Identne prEN ISO 8988:2006ja identne ISO/FDIS 8988:2006
Keel enAsendab EVS-EN ISO 8988:2000
Tähtaeg 29.08.2006
prEN ISO 15103-2 rev
This part of ISO 15103 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(phenylene ether) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here.
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Identne prEN ISO 15103-2:2006ja identne ISO/DIS 15103-2:2006
Keel enAsendab EVS-EN ISO 15103-2:2004
Tähtaeg 29.08.2006
85 PABERITEHNOLOOGIAUUED STANDARDID
EVS-EN 646:2006
Standard kirjeldab protseduuri toiduainetega kokkupuutuva värvitud paberi ja kartongi teimimiseks. Esitatud on kaks protseduuri. Protseduur A pikaajalise kontakti jaoks (näiteks toiduainete pakendid) ja protseduur B lühiajalise kontakti jaoks (näiteks salvrätid, köögipaber, majapidamispaber).
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
Hind 84,00Identne EN 646:2006
Keel enAsendab EVS-EN 646:2001
87 VÄRVIDE JA VÄRVAINETE TÖÖSTUSUUED STANDARDID
EVS-EN 927-2:2006
This part of EN 927 specifies performance requirements for coating systems on exterior wood. Performance requirements are specified according to the categories of 'end use' and 'exposure conditions' (defined in EN 927-1) in terms of the results of natural weathering performance testing carried out in accordance with EN 927-3.
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
Hind 113,00Identne EN 927-2:2006
Keel enEVS-EN ISO 6272-2:2006
This part of ISO 6272 describes a method for rapidly deforming, by impact with a spherical indenter of diameter 12,7 mm or 15,9 mm, a coating film and its substrate and evaluating the effect of such deformation.
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
Hind 104,00Identne EN ISO 6272-2:2006ja identne ISO 6272-2:2002
Keel enEVS-EN ISO 16862:2006
This International Standard describes test methods for evaluating the sag resistance (resistance to sagging) of paints, varnishes and similar coating materials (coatings) when applied to a substrate and held in a vertical position.
Paints and varnishes - Evaluation of sag resistance
Hind 123,00Identne EN ISO 16862:2006ja identne ISO 16862:2003
Keel en
91
KAVANDITE ARVAMUSKÜSITLUS
prEN 50348
This European Standard specifies safety requirements for stationary automatic electrostatic spraying equipment which is used for spraying non-flammable liquids which do not form explosive atmospheres in the spraying area. This applies also for paints that are classed as non-ignitable while spraying, e.g. water based paints (see Annex A).
Stationary automatic electrostatic spraying equipment for non-flammable liquid spraying material - Safety requirements
Identne prEN 50348:2006
Keel enAsendab EVS-EN 50348:2002
Tähtaeg 29.08.2006
prEN ISO 15181-4
This part of ISO 15181 specifies the apparatus and analysis technique for determining the amount of pyridine triphenylborane (PTPB) that has been released from an antifouling paint into artificial seawater in accordance with the procedure given in ISO 15181-1. It determines the PTPB concentration in the artificial seawater extract and gives the final calculation for the release rate of PTPB.
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
Identne prEN ISO 15181-4:2006ja identne ISO/DIS 15181-4:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 15181-5
This part of ISO 15181 specifies the apparatus and analysis technique for determining the amount of tolylfluanid and dichlofluanid that has been released from an antifouling paint into artificial seawater in accordance with the procedure given in ISO 15181-1. Tolylfluanid and dichlofluanid are unstable in the marine environment and degrade to form dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) respectively.
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
Identne prEN ISO 15181-5:2006ja identne ISO/DIS 15181-5:2006
Keel en
Tähtaeg 29.08.2006
91 EHITUSMATERJALID JA EHITUSUUED STANDARDID
CEN/TS 772-22:2006
This Technical Specification specifies a method for determining the freeze/thaw resistance of clay masonry units that are declared by the manufacturer as meeting the requirements for HD units and as suitable to be subjected to severe (F2) exposure.
Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
Hind 132,00Identne CEN/TS 772-22:2006
Keel enCEN/TS 12390-9:2006
This Technical Specification describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences.
Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling
Hind 162,00Identne CEN/TS 12390-9:2006
Keel enEVS-EN 806-3:2006
This European Standard is in conjunction with EN 806-1 and EN 806-2 for drinking water systems within premises. This European Standard describes a calculation method for the dimensioning of pipes for the type of drinking water standard-installations as defined in 4.2. It contains no pipe sizing for fire fighting systems.
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method
Hind 113,00Identne EN 806-3:2006
Keel enEVS-EN 1359:2001/A1:2006
This European Standard specifies the requirements and tests for the construction, performance, safety and production of class 1,5 mechanical diaphragm gas meters (hereinafter referred to as meters) having co-axial single pipe, or two pipe connections, used to measure volumes of fuel gases of the 1st, 2nd and 3rd families according to EN 437, at maximum working pressures not exceeding 0,5 bar and maximum actual flow rates not exceeding 160 m3/h over a minimum ambient temperature range of -10 °C to + 40 °C and a gas temperature range as specified by the manufacturer with a minimum span of 40 K.
Gas meters - Diaphragm meters
Hind 268,00Identne EN 1359:1998/A1:2006
Keel en
92
EVS-EN 1856-1:2003/A1:2006
Käesolev standard määratled toimimisnõuded metallvooderdise (isolatsiooniga) ühekihilise seinaga ja mitmekihilise seinaga korstnatoodetele (korstna moodulid, korstna liitmikud ja terminaalid, kaasa arvatud toendid), mida kasutatakse küttekehades toimival põlemisel tekkivate toodete toimetamiseks väliskeskkonda. Lisaks sellele määratletakse standardis nõuded tähistamisele, tootja poolt antavatele juhistele, tooteinfole ja vastavushindamisele. Metallist vooderdust ja lõõritorude metallist ühendusi, mis kuuluvad standardi prEN 1856 2:1996 käsitlusalasse, antud standard ei kirjelda.
Korstnad. Nõuded metallist korstnatele. Osa 1: Moodulkorstna tooted
Hind 62,00Identne EN 1856-1:2003/A1:2006
Keel enEVS-EN 12480:2002/A1:2006
This European Standard specifies ranges, construction, performances, output characteristics and testing of rotary displacement gas meters for gas volume measurement.
Gas meters - Rotary displacement gas meters
Hind 113,00Identne EN 12480-1:2002/A1:2006
Keel enEVS-EN 14527:2006
This European Standard specifies requirements, test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability of cleanability when used for personal hygiene.
Dušialused koduseks kasutamiseks
Hind 141,00Identne EN 14527:2006
Keel enEVS-EN 50310:2006
This European Standard applies to the equipotential bonding inside buildings in which information technology equipment is going to be installed. It contributes to the standardisation of information technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets: a) safety from electrical hazards; b) reliable signal reference within the entire information technology installation; c) satisfactory electromagnetic performance of the entire information technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Hind 171,00Identne EN 50310:2006
Keel enAsendab EVS-EN 50310:2002
EVS-EN 60335-2-67:2003/A1:2006
This standard applies to electrical motor-operated floor polishing (including waxing and buffing), scrubbing and grinding, scarifying and carpet shampooing appliances primarily designed for industrial and commercial use, with or without attachments, inclu
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-67: Erinõuded põrandahooldus- ja puhastusmasinatele tööstuslikuks ja kaubanduslikuks kasutamiseks
Hind 113,00Identne EN 60335-2-67:2003/A1:2006ja identne IEC 60335-2-67:2002/A1:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 50310:2002
This European Standard applies to the bonding network of a building (CBN), the bonding network of the Information Technology equipment (MESH-BN), and the interconnection between these two networks. It contributes to the standardisation of Information Technology equipment and co-ordinates with the pre-requirements of the generic installation conditions as outlined in IEC 60364-5-548 to achieve the following targets:�a) safety from electrical hazards;�b) reliable signal reference within the entire Information Technology installation;�c) satisfactory electromagnetic performance of the entire Information Technology installation.
Application of equipotential bonding and earthing in buildings with information technology equipment
Identne EN 50310:2000
Keel enAsendatud EVS-EN 50310:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 997:2003/prA1
This standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from vitreous china or stainless steel
WC potid ja WC ruumid haisulukuga
Identne EN 997:2003/prA1:2006
Keel en
Tähtaeg 29.08.2006
EN 1015-1:2004/prA1
See standard spetsifitseerib kaks meetodit kuiva mördisegu või mittekivinenud märja mördisegu terastikulise koostise määramiseks. Märgsõelumismeetod on rakendatav normaaltihedusega täitematerjale sisaldavatele mörtidele ja kuivsõelumismeetod kergtäiteaineid sisaldavatele mörtidele.
Müürimörtide katsemeetodid. Osa 1: Terastikulise koostise määramine (sõelanalüüs)
Identne EN 1015-1:1998/prA1:2006
Keel et
Tähtaeg 29.08.2006
93
EN 1015-2:2004/prA1
Standard spetsifitseerib mördisegu koondproovi võtmise ja sellest koondkatseproovi valmistamise meetodid. Standard spetsifitseerib ka katsemörtide valmistusviisi kuivkomponentidest ja veest.
Müürimörtide katsemeetodid. Osa 2: Mördiproovide võtmine ja katsemörtide valmistamine
Identne EN 1015-2:1998/prA1:2006
Keel et
Tähtaeg 29.08.2006
EN 1015-3:2004/prA2
Standard spetsifitseerib valguvusel põhineva konsistentsi määramise meetodi värskelt segatud mörtide jaoks, mille hulka kuuluvad ka mineraalseid sideaineid sisaldavad ja nii normaaltihedusega täitematerjale kui ka kergtäitematerjale sisaldavad mõrdisegud.
Müürimörtide katsemeetodid. Osa 3: Mördisegu konsistents määramine (raputuslaual)
Identne EN 1015-3:1999/prA2:2006
Keel et
Tähtaeg 29.08.2006
EN 1015-6:2005/prA1
Käesolev Euroopa standard spetsifitseerib näivtiheduse määramise meetodi mördisegudele, mille hulka kuuluvad ka mineraalsed sideained ja nii normaaltihedusega kui ka kergtäitematerjale sisaldavad mördisegud.
Müürimörtide katsemeetodid. Osa 6: Mördisegu näivtiheduse määramine
Identne EN 1015-6:1998/prA1:2006
Keel et
Tähtaeg 29.08.2006
EN 1015-9:2004/prA1
Standard spetsifitseerib värskelt segatud mördi kasutatavus- ja korrigeerimisaja määramise meetodid. Meetod A on määratud üldotstarbeliste või välistöödel kasutatavate mörtide, mille hulka kuuluvad ka mineraalseid sideaineid ja nii normaaltihedusega täitematerjale kui ka kergtäitematerjale sisaldavad mördid, kasutatavusaja määramiseks. Meetodid B ja C on ette nähtud peenmörtide kasutatavus- ja korrigeerimisaja määramiseks.
Müürimörtide katsemeetodid. Osa 9: Mördi kasutatavus- ja korrigeerimisaja määramine
Identne EN 1015-9:1999/prA1:2006
Keel et
Tähtaeg 29.08.2006
EN 1015-10:2005/prA1
Käesolev Euroopa standard spetsifitseerib kivistunud mörtide kuiva näivtiheduse määramise meetodi. See on kasutatav kerg- ja üldotstarbeliste mörtide ning ka peenteramörtide puhul, kui kasutatakse korrapärase kujuga katsekehi.
Müürimörtide katsemeetodid. Osa 10: Kivistunud mördi kuiva näivtiheduse määramine
Identne EN 1015-10:1999/prA1:2006
Keel et
Tähtaeg 29.08.2006
EN 1015-11:2004/prA1
Standard spetsifitseerib meetodi mördist vormitud katsekehade painde- ja survetugevuse määramiseks.
Müürimörtide katsemeetodid. Osa 11: Kivistunud mördi painde- ja survetugevuse määramine
Identne EN 1015-11:1999/prA1:2006
Keel et
Tähtaeg 29.08.2006
EN 60335-2-95:2005/prA1
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the movement of these electrically driven garage doors is included.
Household and similar electrical appliances – Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
Identne EN 60335-2-95:2004/prA1:2006ja identne IEC 60335-2-95:2002/A1:2004
Keel en
Tähtaeg 29.08.2006
IEC 60050-826
IEC 60050 osa 826 käsitleb selliseid elektripaigaldisi, mida kasutatakse nt elamutes, tööstus- ja äriettevõtetes. See ei käsitle avalikke energiajaotussüsteeme ega elektrienergia tootmist ega edastamist nendes süsteemides.
Rahvusvaheline elektrotehnika sõnastik. Osa 826: Elektripaigaldised
ja identne IEC 60050-826:2004
Keel en
Tähtaeg 8.04.2006
prEN 1993-1-3
EN 1993-1-3 esitab nõuded külmalt painutatud õhukeste osadega ja terasplekist valmistatud konstruktsiooniosade projekteerimiseks. It applies to cold-formed steel products made from coated or uncoated thin gauge hot or cold rolled sheet or strip, that have been cold-formed by such processes as cold-rolled forming or press-braking.
Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-3: Üldreeglid. Täiendavad reeglid külmalt painutatud osade ja teraspleki jaoks. EI SISALDA RAHVUSLIKKU LISA
Identne prEN 1993-1-3 :2005
Keel en
Tähtaeg 31.07.2006
prEN 1999-1-5 rev
EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
Identne prEN 1999-1-5:2006
Keel en
Tähtaeg 29.08.2006
94
EN 12620:2005/prA1
Käesolev Euroopa standard määratleb nõuded betoonis kasutatavate looduslike, tehislike ja korduvkasutatavate materjalide töölemise teel saadud täitematerjalide ja fillerite ning nende segude omadustele.
Betooni täitematerjalid
Identne EN 12620:2002/prA1:2006
Keel et
Tähtaeg 29.08.2006
prEN 13084-1
This European Standard deals with the general requirements and the basic performance criteria for the design and construction of all types of free-standing chimneys including their liners. A chimney may also be consideredas free-standing, if it is guyed or laterally supported or if it stands on another structure.
Free-standing chimneys - Part 1: General requirements
Identne prEN 13084-1:2006
Keel en
Tähtaeg 29.08.2006
prEN 15221-1
This European standard gives relevant terms and definitions in the area of Facility Management. It also provides insight into the scope of Facility Management.
Facility Management - Part 1: Terms and definitions
Identne prEN 15221-1:2006
Keel en
Tähtaeg 29.08.2006
prEN 15221-2
This European standard provides guidance on the preparation of agreements for Facility Management work.This European standard is applicable to: – Facility Management agreements for both public and private European Union cross-border, as well as domestic, client/Facility Management service provider relationships; – full range of facility services; – both types of Facility Management service providers (internal and external); – all types of working environments (e.g. industrial, commercial, administration, military, health etc.).
Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
Identne prEN 15221-2:2006
Keel en
Tähtaeg 29.08.2006
prEN ISO 10077-1 rev
This part of ISO 10077 specifies methods for the calculation of the thermal transmittance of windows and pedestrian doors consisting of glazed and/or or opaque panels fitted in a frame, with and without shutters.
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
Identne prEN ISO 10077-1:2006ja identne ISO/FDIS 10077-1:2006
Keel enAsendab EVS-EN ISO 10077-1:2000
Tähtaeg 29.08.2006
prEN ISO 15877-1 rev
This Part of prEN ISO 15877 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
Identne prEN ISO 15877-1:2006ja identne ISO/DIS 15877-1:2006
Keel enAsendab EVS-EN ISO 15877-1:2004
Tähtaeg 29.08.2006
prEN ISO 15877-2 rev
This Part of prEN ISO 15877:2002 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
Identne prEN ISO 15877-2:2006ja identne ISO/DIS 15877-2:2006
Keel enAsendab EVS-EN ISO 15877-2:2004
Tähtaeg 29.08.2006
prEN ISO 15877-3 rev
This Part of prEN ISO 15877 specifies the characteristics of fittings made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings
Identne prEN ISO 15877-3:2006ja identne ISO/DIS 15877-3:2006
Keel enAsendab EVS-EN ISO 15877-3:2004
Tähtaeg 29.08.2006
95
prEN ISO 15877-5 rev
This Part of prEN ISO 15877 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1 of prEN ISO 15877-1:2002).
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system
Identne prEN ISO 15877-5:2006ja identne ISO/DIS 15877-5:2006
Keel enAsendab EVS-EN ISO 15877-5:2004
Tähtaeg 29.08.2006
prHD 60364-1:2006/prAA
Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions
Identne prHD 60364-1:2005/prAA:2006
Keel en
Tähtaeg 29.08.2006
prHD 60364-7-701
Madalpingelised elektripaigaldised. Osa 7-701: Nõuded eripaigaldistele ja paikadele. Dushi- või vanniruumid
Identne prHD 60364-7-701:2005
Keel en
Tähtaeg 1.09.2006
prHD 60364-7-704
Käesolev standard kehtestab erinõuded järgmistes paikades asuvatele ajutise iseloomuga elektripaigaldistele - uute hoonete ehituspaigad; olemasolevate hoonete remondi- ja parandusega seotud paigad, laiendamis- või lammutuspaigad; tehniliste lahenduste teostuspaigad hoonetes; maandustööde teostamis- ja sarnased paigad.
Ehitiste elektripaigaldised. Osa 7: Nõuded eripaigaldistele ja paikadele. Jagu 704: Ehituspaikade paigaldised
Identne HD 60364-7-704:200Xja identne IEC 60364-7-704:2005
Keel enAsendab EVS-HD 384.7.704 S1:2004
Tähtaeg 1.09.2006
prHD 60364-7-705
Applies to all parts of fixed installations of agricultural and horticultural premises outdoors and indoors and to locations where livestock are kept (such as stables, chicken-houses, piggeries, feed-processing locations, lofts and storages for hay, straw and fertilisers).
Electrical installations of buildings. Part 7: Requirements for special installations or locations. Section 705: Electrical installations of agricultural and horticultural premises
Identne prHD 60364-7-705:2006ja identne IEC 60364-7-705:200X
Keel en
Tähtaeg 28.08.2006
prHD 60364-7-706
The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where the possibility of interrupting this contact is limited.
Low-voltage electrical installations -- Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
Identne HD 60364-7-706:200Xja identne IEC 60364-7-706:2005
Asendab EVS-HD 384.7.706 S1:2003
Tähtaeg 1.09.2006
93 RAJATISEDUUED STANDARDID
EVS-EN 13108-1:2006
This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 1: Asfaltbetoon
Hind 208,00Identne EN 13108-1:2006
Keel enEVS-EN 13108-2:2006
This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for very thin layers for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 2: Väga õhukeste kihtidena paigaldatav asfaltbetoon
Hind 171,00Identne EN 13108-2:2006
Keel enEVS-EN 13108-3:2006
This European Standard specifies requirements for mixtures of the mix group Soft Asphalt for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 3: Pehme asfalt
Hind 180,00Identne EN 13108-3:2006
Keel enEVS-EN 13108-4:2006
This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 4: Kuumrullitud asfaltkate
Hind 199,00Identne EN 13108-4:2006
Keel en
96
EVS-EN 13108-5:2006
This European Standard specifies requirements for mixtures of the mix group Stone Mastic Asphalt for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 5: Kivivaluasfalt
Hind 180,00Identne EN 13108-5:2006
Keel enEVS-EN 13108-6:2006
This European Standard specifies requirements for mixtures of the mix group Mastic Asphalt for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 6: Valuasfalt
Hind 171,00Identne EN 13108-6:2006
Keel enEVS-EN 13108-7:2006
This European Standard specifies requirements for mixtures of the mix group Porous Asphalt for use on roads, airfields and other trafficked areas.
Asfaltsegud. Materjali spetsifikatsioon. Osa 7: Poorne asfalt
Hind 171,00Identne EN 13108-7:2006
Keel enEVS-EN 13924:2006
This document provides a framework for specifying the properties and relevant test methods for hard paving grade bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
Bituumen ja bituumensideained. Kivistumisjärkude spetsifikatsioonid
Hind 151,00Identne EN 13924:2006
Keel en
97 OLME. MEELELAHUTUS. SPORTUUED STANDARDID
CEN/TR 15371:2006
The purpose of this CEN Technical Report is to provide replies to requests for interpretations ofEN 71-1:2005, Safety of toys – Part 1: Mechanical and physical properties (under publication),EN 71-2:2006, Safety of toys – Part 2: Flammability,EN 71-8:2003, Safety of toys – Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use.
Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8
Hind 132,00Identne CEN/TR 15371:2006
Keel en
CEN/TS 15398:2006
This document establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols.� Resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; � textile floor coverings, excluding loose-laid mats; � laminate floor coverings; � floor panels for loose laying.
Resilient, textile and laminate floor coverings - Floor covering standard symbols
Hind 151,00Identne CEN/TS 15398:2006
Keel enEVS-EN 71-8:2003/A1:2006
This part of EN 71 specifies requirements and test methods for activity toys for domestic family use attached to or incorporating a crossbeam, and similar toys intended for children under 14 years of age to play on or in and to bear the mass of one or more children. The scope excludes equipment intended for use in schools, kindergartens, public playgrounds, restaurants, shopping centres and similar public places dealt with in EN 1176 parts 1 to 6.
Mänguasjade ohutus. Osa 8: Kiiged, liumäed ja teised perekondlikus sise- ja välistegevuses kasutatavad sarnased mänguvahendid
Hind 95,00Identne EN 71-8:2003/A1:2006
Keel enEVS-EN 13329:2006
This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1). It includes a classification system, based on EN 685, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
Hind 199,00Identne EN 13329:2006
Keel enAsendab EVS-EN 13329:2000EVS-EN 14837:2006
This European Standard specifies a method for the determination of the slip resistance of a sports surface in relation to a studded or smooth soled sports shoe.
Surfaces for sports areas - Determination of slip resistance
Hind 113,00Identne EN 14837:2006
Keel enEVS-EN 14988-1:2006
This European Standard specifies safety requirements for children’s high chairs intended for children from 6 months to 36 months of age. If the product can be converted into a product for which an EN safety standard exists, the product shall also fulfil the requirements of that standard.
Children's high chair - Part 1: Safety requirements
Hind 113,00Identne EN 14988-1:2006
Keel enAsendab EVS-ENV 1178-1:1999
97
EVS-EN 60065:2006
This International Safety Standard applies to electronic apparatus designed to be fed from the MAINS, from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or reproduction respectively of audio, video and associated signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus.
Audio-, video- jms elektriseadmed. Ohutusnõuded
Hind 358,00Identne EN 60065:2002ja identne IEC 60065:2001
Keel enAsendab EVS-EN 60065:2002EVS-EN 60335-1:2003/A12:2006
Deals with the safety of electrical appliances for household and similar purposes. It deals with the common hazards presented by appliances that are encountered by all persons in and around the home. It also covers appliances used by laymen in shops, in light industry and on farms (such as catering equipment, and industrial and commercial cleaning appliances). The rated voltage of the appliances are not more than 250 V for single-phase appliances and 480 V for other appliances.
Majapidamis- ja muude taoliste elektriseadmete ohutus. Osa 1: Üldnõuded
Hind 286,00Identne EN 60335-1:2002/A12:2006ja identne IEC 60335-1:2001
Keel enEVS-EN 60335-2-43:2003/A1:2006
Deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. The clothes racks may be fixed or free-standing in a cabinet. The air circulation may be natural or forced. This standard does not apply to tumble dryers (refer to IEC 60335-2-11 for tumble dryers)
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-43: Erinõuded riidekuivatitele ja käteräti-siugtorudele
Hind 62,00Identne EN 60335-2-43:2003/A1:2006ja identne IEC 60335-2-43:2002/A1:2005
Keel enEVS-EN 60335-2-68:2003/A1:2006
Applicable to the safety of electrical portable, motor-operated spray extraction appliances and electrical attachments intended for industrial and commercial use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliance
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-68: Erinõuded pihustustõmbeseadmetele tööstuslikuks ja kaubanduslikuks kasutamiseks
Hind 113,00Identne EN 60335-2-68:2003/A1:2006ja identne IEC 60335-2-68:2002/A1:2005
Keel en
EVS-EN 60730-2-2:2002/A1:2006
Applies to the partial evaluation of thermal motor protectors and their inherent safety. Applies also to thermal motor protectors within the scope of IEC 335-1.
Elektrilised automaatjuhtimisseadmed majapidamis- ja muuks taoliseks kasutuseks. Osa 2-2: Erinõuded mootorite termokaitseseadistele
Hind 113,00Identne EN 60730-2-2:2002/A1:2006ja identne IEC 60730-2-2:2001/A1:2005
Keel en
ASENDATUD VÕI TÜHISTATUD STANDARDID
EVS-EN 60065:2002
This International Standard applies to electronic apparatus designed to be fed from the MAINS or from a SUPPLY APPARATUS and intended for reception, generation, recording or reproduction respectively of audio, video and associated signals. It also applies to apparatus designed to be used exclusively in combination with the above mentioned apparatus. This standard concerns only safety aspects of the above apparatus; it does not concern other matters, such as style or performance.
Audio-, video- jms elektriseadmed. Ohutusnõuded
Identne EN 60065:2002+AC:2006ja identne IEC 60065:2001
Keel enAsendab EVS-EN 60065:2001Asendatud EVS-EN 60065:2006EVS-ENV 1178-1:1999
Väljaande see osa määrab kindlaks kõrgetele kokkupandavatele kodu-lastetoolidele esitatavad ohutusnõuded. Selliseid toole saab muuta madalateks toolideks, madalateks toolideks ja laudadeks, väikelaste kõnnitugedeks, lastekärudeks, kiikedeks, laste autotoolideks või madalateks lamamistoolideks. Neid lisafunktsioone see väljaanne ei käsitle.
Mööbel. Laste kõrged toolid koduseks kasutamiseks. Osa 1: Ohutusnõuded
Identne ENV 1178-1:1994ja identne ISO 9221-1:1992
Keel etAsendatud EVS-EN 14988-1:2006
KAVANDITE ARVAMUSKÜSITLUS
EN 60335-2-2:2003/prA2
Deals with the safety of electric vacuum cleaners and water-suction cleaning appliances. It also applies to motorized cleaning heads and current-carrying hoses for vacuum cleaners. These are for household use, including vacuum cleaners for animal grooming. The rated voltage is less than 250 V. This standard does not cover industrial appliances, nor special conditions such as explosive atmospheres
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-2: Erinõuded tolmuimejatele ja veeimemis-puhastusseadmetele
Identne IEC 60335-2-2:2002/A2:2006ja identne EN 60335-2-2:2003/prA2:2006
Keel en
Tähtaeg 29.08.2006
98
EN 60335-2-17:2003/A1
Deals with the safety of electric blankets, pads and other flexible appliances for heating the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. This standard also deals with the control units supplied with the appliance
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-17: Erinõuded tekkidele, patjadele ja muudele taolistele paindlikele soojendusseadmetele
Identne EN 60335-2-17:2002/A1:2006ja identne IEC 60335-2-17:2002/A1:2006
Keel en
Tähtaeg 29.08.2006
EN 60456:2005/prAA
Deals with methods for measuring the performance of clothes washing machines for household use, with or without heating devices and for cold and/or hot water supply. Also included, appliances for water extraction by centrifugal force and appliances for both washing and drying textiles (called washer-dryers) with respect to their washing performance. The object is to state and define the principal performance characteristics of household electric washing machines and spin extractors and to describe the standard methods for measuring these characteristics.
Kodumajapidamises kasutatavad pesupesemismasinad. Toimimisnäitajate mõõtemeetodid
Identne EN 60456:2005/prAA:2006
Keel en
Tähtaeg 29.08.2006
prEN 12720 rev
Käesolev standard sätestab meetodi pinna vastupidavuse hindamiseks külmadele vedelikele ja on rakendatav kõigi jäikade pindadega valmistoodete korral, sõltumata materjalist, välja arvatud nahk ja tekstiilmaterjalid.
Mööbel. Pinna vastupidavuse hindamine külmadele vedelikele
Identne prEN 12720:2006
Keel etAsendab EVS-EN 12720:1999
Tähtaeg 29.08.2006
prEN 12721 rev
Käesolev standard sätestab meetodi pinna vastupidavuse hindamiseks niiskele kuumusele ja on rakendatav köigi jäikade pindadega valmistoodete korral, sõltumata materjalist, väljaarvutud nahk ja tekstiilmaterjalid, mis jäävad antud standardi käsitlusalast välja. Üldjuhul viiakse katse läbi valmismööblil, kuid võidakse sooritada ka samast materjalist katsekilbil, mis on viimistletud identselt valmistoodanguga ja mille mõõtmed on piisavad katsenõuetele vastamiseks.
Mööbel. Pinna vastupidavuse hindamine niiskele kuumusele
Identne prEN 12721:2006
Keel etAsendab EVS-EN 12721:1999
Tähtaeg 29.08.2006
prEN 12722 rev
Käesolev standard sätestab meetodi pinna vastupidavuse hindamiseks kuivale kuumusele ja on rakendatav kõigi jäikade pindadega valmistoodete korral, sõltumata materjalist, väljarvatud nahk ja tekstiilmaterjalid, mis jäävad antud standardi käsitlusalast välja. Üldjuhul viiakse katsetus läbi valmismööblil, kuid võidakse sooritada ka samast materjalist katsekilbil, , mis on viimistletud identselt valmistoodanguga ja miolle mõõtmed on piisavad katsenõuetele vastamiseks
Mööbel. Pinna vastupidavuse hindamine kuivale kuumusele
Identne prEN 12722:2006
Keel etAsendab EVS-EN 12722:1999
Tähtaeg 29.08.2006
prEN 50229 rev
This European Standard specifies the test methods which shall be applied in accordance with the Commission Directive 96/60/EC of 19 September 1996 implementing Council Directive 92/75/EEC with regard to energy labelling of household combined washer-driers.
Kodumajapidamises kasutatavad elektrilised pesukuivatid. Toimimisnäitajate mõõtemeetodid
Identne prEN 50229:2006
Keel enAsendab EVS-EN 50229:2002
Tähtaeg 29.08.2006
99
Kommenteerimise ja ettepanekute esitamise tähtaeg 01.09.2006 prEVS 811:2006 Varade hindamine. Osa 6: Hindamine laenutagatisteks Standardite seeria EVS 875 käsitleb vara hindamist. Standardite kasutusalaks on vara hindamisega ja hinnangute kasutamisega seotud tegevused, eelkõige laenutagatiste ja finantsaruandlusega seotud tegevused. Standardite kasutajateks on vara hindajad, kinnisvaraspetsialistid, ehitusspetsialistid, keskkonnaspetsialistid, finantsaruandlusega tegelevad spetsialistid (raamatupidajad, audiitorid), krediidiasutused, kõrgemad õppeasutused. Standardite olemasolu loob aluse vara hindamise ühtsele käsitlusele rahuldades nii era- kui avaliku sektori vajadusi.Käesolev standard EVS 875-6 käsitleb üldpõhimõtteid kinnisvara hindamisel laenutagatisteks, laenutagatisteks sobivaid ja mittesobivaid varasid, väärtuse mõistete rakendusi ja iseärasusi, iseärasusi tulenevalt varade liigist, laenuandja suhteid hindajaga, ümberhindamisi ning seoseid finantsaruandlusega. Identne: prEVS 811:2006 prEVS 865-1:2006 Hoone ehitusprojekti kirjeldus. Osa 1: Eelprojekti seletuskiri Standard käsitleb hoonete ja spordirajatiste ning nende tehnosüsteemide, välisvõrkude, krundisiseste teede ja platside eelprojekti seletuskirja. Identne: prEVS 865-1:2006 prEVS 865-2:2006 Hoone ehitusprojekti kirjeldus. Osa 2: Põhiprojekti ehituskirjeldus Käesolev standard käsitleb hoonete ja spordirajatiste ning nende tehnosüsteemide, välisvõrkude, krundisiseste teede ja platside põhiprojekti ehituskirjeldust. Identne: prEVS 865-2:2006 prEVS 875-6:2006 Varade hindamine. Osa 6: Hindamine laenutagatisteks
Standardite seeria EVS 875 käsitleb vara hindamist. Standardite kasutusalaks on vara hindamisega ja hinnangute kasutamisega seotud tegevused, eelkõige laenutagatiste ja finantsaruandlusega seotud tegevused. Standardite kasutajateks on vara hindajad, kinnisvaraspetsialistid, ehitusspetsialistid, keskkonnaspetsialistid, finantsaruandlusega tegelevad spetsialistid (raamatupidajad, audiitorid), krediidiasutused, kõrgemad õppeasutused. Standardite olemasolu loob aluse vara hindamise ühtsele käsitlusele rahuldades nii era- kui avaliku sektori vajadusi.Käesolev standard EVS 875-6 käsitleb üldpõhimõtteid kinnisvara hindamisel laenutagatisteks, laenutagatisteks sobivaid ja mittesobivaid varasid, väärtuse mõistete rakendusi ja iseärasusi, iseärasusi tulenevalt varade liigist, laenuandja suhteid hindajaga, ümberhindamisi ning seoseid finantsaruandlusega. Identne: prEVS 875-6:2006 prEVS 875-7:2006 Varade Hindamine. Osa 7: Hinnangute läbivaatamine Standardite seeria EVS 875 käsitleb vara hindamist. Standardite kasutusalaks on vara hindamisega ja hinnangute kasutamisega seotud tegevused, eelkõige laenutagatiste ja finantsaruandlusega seotud tegevused. Standardite kasutajateks on vara hindajad, kinnisvaraspetsialistid, ehitusspetsialistid, keskkonnaspetsialistid, finantsaruandlusega tegelevad spetsialistid (raamatupidajad, audiitorid), krediidiasutused, kõrgemad õppeasutused. Standardite olemasolu loob aluse vara hindamise ühtsele käsitlusele rahuldades nii era- kui avaliku sektori vajadusi. Käesolev standard EVS 875-7 käsitleb hinnangu ülevaatuse eesmärke ja liike, hinnangu ülevaataja pädevust, ülevaatuse tulemuse kasutamist ning seost hindamise heade tavadega. Identne: prEVS 875-7:2006
100
STANDARDITE TÕLKED KOMMENTEERIMISEL
Selles jaotises avaldame teavet eesti keelde tõlgitavate Euroopa või rahvusvaheliste standardite kohta. Alates veebruarikuust 2004 ei avaldata teavet arvamusküsitluse jaotises eelpool nimetatud standardite kohta, kuna tegemist on varem jõustumisteate meetodil üle võetud standarditega, mille sisu osas arvamust avaldada ei saa. Standardite tõlgetega on võimalik tutvuda EVS standardiosakonnas ja klienditeeninduses [email protected] . Tõlgete kommenteerimise ja ettepanekute esitamise perioodi lõpp on 01.08.2006.
prEVS-EN 12354-6:2006 Ehitusakustika. Hoonete akustilise toimivuse hindamine elementide akustilise toime põhjal. Osa 6: Heli neeldumine suletud ruumides Standard kirjeldab arvutusmudelit, mis on mõeldud täieliku ekvivalentse helineeldumis-pinna või järelkõlakestuse hindamiseks hoonete suletud ruumides. Arvutus põhineb peamiselt materjalide ja objektide heli-neeldumisvõimet iseloomustavatel mõõtmis-tulemustel. Arvutusi saab teostada ainult sagedusribades. Identne: EN 12354-6:2003 prEVS-EN ISO 3675:2006 Toornafta ja vedelad naftaproduktid. Laboratoorne tiheduse määramine. Areomeetriline meetod (ISO 3675:1998) Standard esitab laboratoorse määramismeetodi, kus kasutatakse areomeetrit 15 °C juures toornafta, vedelate naftasaaduste ja nafta- ning mittenaftasaaduste segudele, mida tavaliselt käsitletakse kui vedelikke ja mille Reidi aururõhk (RVP) on 100 kPa või vähem. Identne: EN ISO 3675:1998 prEVS-EN ISO 9919:2006 Elektrilised meditsiiniseadmed. Erinõuded meditsiiniotstarbelise pulssoksümeetri esmasele ohutusele ja olulistele toimimisnäitajatele (ISO 9919:2005) Standard sätestab inimestel kasutatava pulssoksümeetri peamised ohutus- ja toimivusnõuete osas kehtivad erinõuded. See sisaldab tavakasutamiseks vajalikku mistahes osa, nt pulssoksümeetri monitor, pulss-oksümeetri andur, anduri kaabli pikendus. Need nõuded kehtivad samuti pulss-oksümeetrile, sealhulgas pulssoksümeetri monitoridele, pulssoksümeetri anduritele ja
anduri kaabli pikendustele, mida on ümbertöödeldud. Identne: EN ISO 9919:2005 prISO/TS 22004:2006 Toiduohutuse juhtimissüsteem. Juhised ISO 22000:2005 rakendamiseks (ISO/TS 22004:2005) Tehniline spetsifikatsioon esitab üldised juhised, mida saab rakendada ISO 22000 kasutamisel. Identne: ISO/TS 22004:2005 prEVS-EN 1304:2006 Keraamilised rea- ja erikatusekivid. Määratlused ja spetsifikatsioonid Käesolev Euroopa standard spetsifitseerib nõuded keraamilistele rea- ja erikatusekividele, mida kasutatakse kaldkatuste katmiseks ja seinte vooderdamiseks. Standard rakendub kõigile jaotises 3 määratletud rea- ja erikatusekividele. Käesolevale standardile vastavad keraamilised rea- ja erikatusekivid sobivad kasutamiseks katusekattena ja välis- ning siseseinavoodrina Identne: EN 1304:2004 prEVS-EN 490:2006 Betoonist rea- ja erikatusekivid katuste katmiseks ja seinte vooderdamiseks Käesolev Euroopa standard spetsifitseerib nõuded betoonist rea- ja erikatusekividele, mida kasutatakse kaldkatuste katmiseks ja seinte vooderdamiseks. Betoonist rea- ja erikatusekivid võivad sisaldada kattekihti ja liimitud betoonkomponente. Identne: EN 490:2004 + EN 490:2004/ A1:2006
101
prEVS-EN 12524:2006 Ehitusmaterjalid ja –tooted. Hügrotermilised omadused. Projekteerimisel kasutatavad tabelväärtused Käesolev dokument esitab tabelitena soojus- ja niiskusülekande arvutustes vajalikud ehituskonstruktsioonides tavapäraselt kasutatavate soojuslikult homogeensete materjalide ja toodete andmed. Samuti esitatakse andmed, mis võimaldavad soojuslike projektväärtuste arvutamist ja kasutamist erinevates keskkonnatingimustes. Identne: EN 12524:2000 prEVS-EN 516:2006 Katuse valmistarvikud. Juurdepääsupaigaldised. Katusesillad, astmelaiud ja astmed Käesolev Euroopa standard käsitleb kaldkatuse kandetarindite külge püsivalt kinnitatud ehituselemente, mis on vajalikud seismiseks või käimiseks katusel asuvate seadmete ülevaatuse, hoolduse või remondi ajal. Standard määratleb katuse kande-konstruktsioonidele kinnitatavate juurdepääsu-paigaldiste ja nende kinnitussüsteemide põhimõõtmed, kasutatavad materjalid, nõuded kandevõimele ning katsetuste ulatuse. Standard ei käsitle kaldkatusele püsivalt kinnitatud redeleid. Identne: EN 516:2006 prEVS-EN 517:2006 Katuse valmistarvikud. Katuse turvakonksud Käesolev Euroopa standard käsitleb kaldkatuse kandetarindite külge püsivalt kinnitatud
turvaelemente (ehituselemente), mis on ette nähtud katusekatjate redelite riputamiseks, töölavade toestamiseks ja inimese allakukkumist takistavate ohutusvahendite kinnitamiseks. Standard määratleb kandetarindite külge püsivalt kinnitatud turvakonksude põhimõõtmed, kasutatavad materjalid, nõuded kandevõimele ning katsetamise ulatuse. Identne: EN 517:2006 prEVS-EN-ISO 7345:2006 Soojusisolatsioon. Füüsikalised suurused ja määratlused Käesolev rahvusvaheline standard määratleb soojusisolatsiooni füüsikalised suurused ja esitab terminitega seonduvad sümbolid ja mõõtühikud. Märkus. Kuna käesoleva rahvusvahelise standardi käsitlusala on piiratud soojusisolatsiooniga, erinevad mõned jaotises 2 toodud määratlused standardis ISO 31/4 Quantities and units of heat toodutest. Selliste erinevuste eristamiseks on asjakohase ingliskeelse määratluse ette lisatud tärn. Identne: EN-ISO 7345:1995 prEVS-EN-ISO 9251:2006 Soojusisolatsioon. Soojusülekande tingimused ja materjalide omadused. Sõnastik Käesolev rahvusvaheline standard määratleb soojusisolatsiooni terminid, mida kasutatakse soojusülekande tingimuste ja materjalide omaduste kirjeldamiseks. Identne: EN-ISO 9251:1995
102
STANDARDITE MÜÜGI TOP JUUNI
Tähis
Pealkiri Kogus
1 EVS-EN ISO 22000:2006 Toiduohutuse juhtimissüsteemid. Nõuded kõikidele organisatsioonidele toidu käitlemisahelas (ISO 22000:2005)
36
2 EVS käsiraamat:2006 EVS 18001 rakendusjuhised 333 EVS-EN ISO/IEC 17025:2006 Katse- ja kalibreerimislaborite kompetentsuse üldnõuded 214 EVS-HD 60364-5-559:2006 Ehitiste elektripaigaldised. Osa 5-55: Elektriseadmete valik ja
paigaldamine. Muud seadmed. Jagu 559: Valgustid ja valgustuspaigaldised
13
5 EVS-EN 1991-1-3:2006 Eurokoodeks 1: Ehituskonstruktsioonide koormused - Osa 1-3: Üldkoormused. Lumekoormus. Sisaldab rahvuslikku lisa
12
6 EVS-EN ISO/IEC 17020:2006 Eri tüüpi inspekteerimisasutuste toimimise üldkriteeriumid 127 EVS-HD 384.7.753:2006 Ehitiste elektripaigaldised. Osa 7: Nõuded eripaigaldistele ja -
paikadele. Jagu 753: Põranda- ja laeküte 11
8 EVS-HD 60364-7-703:2006 Ehitiste elektripaigaldised. Osa 7-703: Nõuded eripaigaldistele ja -paikadele. Saunakeriseid sisaldavad ruumid ja kabiinid
10
9 EVS 843:2003 Linnatänavad 910 EVS-EN ISO 9001:2001 Kvaliteedijuhtimissüsteemid. Nõuded 8
EVS klienditeenindus (müük ja tutvumine standarditega) Standardikeskuses Aru tn 10, 10317, Tallinn Telefon: 605 5060 ja 605 5065 Faks: 605 5063 E-mail: [email protected] Ostu saab sooritada ka meie koduleheküljel asuvas ostukorvis www.evs.ee/POOD
103