! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 1

RLH Auxiliary Fan Kit

ENCLOSURE TEMPERATURE CONTROL

DescriptionRLH Auxiliary Fan Kits are an economical way to help control the interior temperature of cabinets and enclosures. The fans are controlled by an adjustable thermostat, and combination heater/fan kits are also available for year round thermal management.

RLH Auxiliary Fan Kits are designed to provide greater active venting on all RLH enclosures. Kits come with a larger passive inlet vent and particulate screen, to match the larger vent fan, sealing compound for the exterior louver panels, and all mounting hardware.

The fans can be factory installed when ordered with RLH enclosures. Installation instructions are included for retrofit applications.

To learn more about our products contact your RLH representative or visit the RLH website.

2013A-0802

RLH Auxiliary Fan Kit

Key Features• Rugged dual ball bearing system for high life

expectancy• Compatible with all RLH enclosures• Available in 120VAC, 12VDC, 24VDC, and 48VDC

configurations • Auxiliary 120mm fan kits are available for retrofit or

special applications• Designed for indoor or outdoor applications• User adjustable thermostats included• All attaching stainless steel hardware and

accessories are included

The leader in

rugged fiber optic

technology.USER GUIDE

RLH Industries, Inc.

Fan Dimensions

RoHS Compliant10

Orion FansInformation and data is subject tochange without prior notification.

Knight Electronics, Inc.10557 Metric DriveDallas, Texas 75243214-340-0265

OA109 Series AC Fan - 115V, 230V, Dual Voltage120x38mm (4.7”x 1.5”)

Frame Diecast AluminumOperating TemperatureBall Bearing-20C ~ +80CSleeve Bearing-10C ~ +50C

Life ExpectancyBall Bearing60,000 hours (L10 at 40C)Sleeve Bearing30,000 hours (L10 at 40C)

Dual VoltageFans can be configured torun on 115V or 230V.Connection via 4x leads

Impeller PBT, UL94V-O plastic

Connection2x 300mm Lead wires(22AWG) orterminals

Motor AC shaded pole, impedanceprotected

Bearing System Dual ball or Sleeve

Insulation Resistance 10M ohm between leadwireand frame (500VDC)

Dielectric Strength 1 min at 1500 VAC, 50/60Hz

Model Number Speed (RPM) Airflow (CFM) Noise (dB) Volts AC Voltage Range Watts Max. StaticPressure (“H2O)

OA109AP-11-1* 3000 110 42 115 80~130 15 .28

OA109AP-11-2* 2300 71 35 115 80~130 11 .24

OA109AP-11-3* 1600 51 25 115 80~130 8 .15

OA109AP-22-1* 3000 110 42 230 160~260 15 .28

OA109AP-22-2* 2300 71 30 230 160~260 11 .24

OA109AP-22-3* 1600 51 25 230 160~260 8 .15

OA109AP-11/22-1WB 3000 110 42 115/230 80~260 15 .28

OA109AP-11/22-2WB 2300 71 35 115/230 80~260 11 .24

OA109AP-11/22-3WB 1600 51 25 115/230 80~260 8 .15

* Indicate “TB” (Terminal Ball Bearing), “WB” (12” Wire Leads, Ball Bearing), “TS” (Terminal, Sleeve Bearing), “WS” (12” Wire Leads, Sleeve Bearing)** Indicate “B” (Ball Bearing) or “S” (Sleeve Bearing)

m0

RoHS Compliant49

Orion FansInformation and data is subject tochange without prior notification.

Knight Electronics, Inc.10557 Metric DriveDallas, Texas 75243214-340-0265

OD1232 Series DC Fan - 12, 24, 48V120x32mm (4.7”x 1.25”)

Frame & Impeller PBT, UL94V-O plastic Available Options:Tachometer (FG)Alarm (RD)Thermal Speed Control(Thermistor)PWM Input (Manual SpeedControl)Life Expectancy (L10)Ball Bearing60,000 hours (L10 at 40C)Sleeve Bearing30,000 hours (L10 at 40C)Operating TemperatureBall Bearing-20C ~ +80CSleeve Bearing-10C ~ +50C

Connection 2x Lead wires

MotorBrushless DC, auto restart,impedance and polarityprotected

Bearing System Dual Ball or Sleeve

Insulation Resistance 10M ohm between leadwireand frame (500VDC)

Dielectric Strength 1 second at 500 VAC, maxleakage - 500 MicroAmp

Storage Temperature -30C ~ +90C

Model Number Speed (RPM) Airflow (CFM) Noise (dB) Volts DC Voltage Range Amps Max. StaticPressure (“H2O)

OD1232-12H * 3750 120 51 12 6~13.8 0.60 0.42OD1232-12M * 3300 107 48 12 6~13.8 0.50 0.33OD1232-12L * 2900 93 44 12 6~13.8 0.32 0.27OD1232-24H * 3750 120 51 24 12~27.8 0.45 0.42OD1232-24M * 3300 107 48 24 12~27.8 0.28 0.33OD1232-24L * 2900 93 44 24 12~27.8 0.22 0.27OD1232-48H * 3750 120 51 48 24~55.2 0.18 0.42OD1232-48M * 3300 107 48 48 24~55.2 0.15 0.33OD1232-48L * 2900 93 44 48 24~55.2 0.13 0.27

* Indicate “B” to specify Ball bearing or “S” to specify Sleeve bearing

m4

77282 2009_fan_cat sec 3:Layout 1 8/3/09 11:19 AM Page 49

AC Fan Dimensions DC Fan Dimensions

Airflow and Static Pressure

RoHS Compliant10

Orion FansInformation and data is subject tochange without prior notification.

Knight Electronics, Inc.10557 Metric DriveDallas, Texas 75243214-340-0265

OA109 Series AC Fan - 115V, 230V, Dual Voltage120x38mm (4.7”x 1.5”)

Frame Diecast AluminumOperating TemperatureBall Bearing-20C ~ +80CSleeve Bearing-10C ~ +50C

Life ExpectancyBall Bearing60,000 hours (L10 at 40C)Sleeve Bearing30,000 hours (L10 at 40C)

Dual VoltageFans can be configured torun on 115V or 230V.Connection via 4x leads

Impeller PBT, UL94V-O plastic

Connection2x 300mm Lead wires(22AWG) orterminals

Motor AC shaded pole, impedanceprotected

Bearing System Dual ball or Sleeve

Insulation Resistance 10M ohm between leadwireand frame (500VDC)

Dielectric Strength 1 min at 1500 VAC, 50/60Hz

Model Number Speed (RPM) Airflow (CFM) Noise (dB) Volts AC Voltage Range Watts Max. StaticPressure (“H2O)

OA109AP-11-1* 3000 110 42 115 80~130 15 .28

OA109AP-11-2* 2300 71 35 115 80~130 11 .24

OA109AP-11-3* 1600 51 25 115 80~130 8 .15

OA109AP-22-1* 3000 110 42 230 160~260 15 .28

OA109AP-22-2* 2300 71 30 230 160~260 11 .24

OA109AP-22-3* 1600 51 25 230 160~260 8 .15

OA109AP-11/22-1WB 3000 110 42 115/230 80~260 15 .28

OA109AP-11/22-2WB 2300 71 35 115/230 80~260 11 .24

OA109AP-11/22-3WB 1600 51 25 115/230 80~260 8 .15

* Indicate “TB” (Terminal Ball Bearing), “WB” (12” Wire Leads, Ball Bearing), “TS” (Terminal, Sleeve Bearing), “WS” (12” Wire Leads, Sleeve Bearing)** Indicate “B” (Ball Bearing) or “S” (Sleeve Bearing)

m0Airflow (CFM)

Stat

ic P

ress

ure

(“H

2O)

RoHS Compliant49

Orion FansInformation and data is subject tochange without prior notification.

Knight Electronics, Inc.10557 Metric DriveDallas, Texas 75243214-340-0265

OD1232 Series DC Fan - 12, 24, 48V120x32mm (4.7”x 1.25”)

Frame & Impeller PBT, UL94V-O plastic Available Options:Tachometer (FG)Alarm (RD)Thermal Speed Control(Thermistor)PWM Input (Manual SpeedControl)Life Expectancy (L10)Ball Bearing60,000 hours (L10 at 40C)Sleeve Bearing30,000 hours (L10 at 40C)Operating TemperatureBall Bearing-20C ~ +80CSleeve Bearing-10C ~ +50C

Connection 2x Lead wires

MotorBrushless DC, auto restart,impedance and polarityprotected

Bearing System Dual Ball or Sleeve

Insulation Resistance 10M ohm between leadwireand frame (500VDC)

Dielectric Strength 1 second at 500 VAC, maxleakage - 500 MicroAmp

Storage Temperature -30C ~ +90C

Model Number Speed (RPM) Airflow (CFM) Noise (dB) Volts DC Voltage Range Amps Max. StaticPressure (“H2O)

OD1232-12H * 3750 120 51 12 6~13.8 0.60 0.42OD1232-12M * 3300 107 48 12 6~13.8 0.50 0.33OD1232-12L * 2900 93 44 12 6~13.8 0.32 0.27OD1232-24H * 3750 120 51 24 12~27.8 0.45 0.42OD1232-24M * 3300 107 48 24 12~27.8 0.28 0.33OD1232-24L * 2900 93 44 24 12~27.8 0.22 0.27OD1232-48H * 3750 120 51 48 24~55.2 0.18 0.42OD1232-48M * 3300 107 48 48 24~55.2 0.15 0.33OD1232-48L * 2900 93 44 48 24~55.2 0.13 0.27

* Indicate “B” to specify Ball bearing or “S” to specify Sleeve bearing

m4

77282 2009_fan_cat sec 3:Layout 1 8/3/09 11:19 AM Page 49

Airflow (CFM)

Stat

ic P

ress

ure

(“H

2O)

AC Fan Airflow Chart DC Fan Airflow Chart

! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 2

Connection Diagrams

AC Fan and Thermostat120VAC Powered Fan and Thermostat

DC Fan and Thermostat24 or 48VDC Powered Fan and Thermostat

AC Mains Plug

AC GFI Protected Outlet Box

(For Customer Use) Thermostat

1 2

120VAC Fan

Terminal Block

Wired into AC Mains by Customer

L

N

L N

DIN Rail

DIN Rail

1 2

Thermostat24 or 48VDC Fan

24 or 48VDC Power

Terminal Block

! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 3

Ordering Information

Part Number Description Recommended ApplicationRLH-EFKACST-01 Auxiliary 120VAC Fan Kit with Thermostat Enclosures from H30”xW24”xD12” up to H40”xW32”xD18”

RLH-EFK12ST-01 Auxiliary 12VDC Fan Kit with Thermostat Enclosures from H30”xW24”xD12” up to H40”xW32”xD18”

RLH-EFK24ST-01 Auxiliary 24VDC Fan Kit with Thermostat Enclosures from H30”xW24”xD12” up to H40”xW32”xD18”

RLH-EFK48ST-01 Auxiliary 48VDC Fan Kit with Thermostat Enclosures from H30”xW24”xD12” up to H40”xW32”xD18”

General Specifications

DC Powered Fans AC Powered Fans

Frame and Impeller Construction

Polybutylene Terephthalate (PBT), UL94V-O plastic Polybutylene Terephthalate (PBT), UL94V-O plastic Frame and Impeller Construction * AC fan frame constructed from Diecast Aluminum * AC fan frame constructed from Diecast Aluminum

Bearing System High life expectancy dual ball bearing High life expectancy dual ball bearing

Connection 2x Lead wires 2x Lead wires (24AWG) or Terminals

Motor Brushless DC, auto restart, impedance and polarity protected

AC Capacitor drive, thermally protected

Speed 3750 RPM 2800/3300 RPM

Airflow 120 CFM 110/131 CFM

Noise 51dB 43/47dB

Amps 12V at 0.60A, 24V at 0.42A, 48V at 0.42A 120V at 0.17/0.18A

Temperature Limits -20°F to +176°F (-20°C to +80°C) -10°F to +149°F (-10°C to +65°C)

Insulation Resistance 10M ohm between leadwire and frame (500VDC)

>100M ohm between leadwire and frame (500VDC)

Dielectric Strength 1 second at 500VAC, max leakage - 500 MicroAmp

1 min at 1500VAC, 50/60Hz

Power Requirements 12V (6~13.8V) 120VACPower Requirements

24V (12~27.8V)

120VACPower Requirements

48V (24~55.2V)

120VAC

Max. Static Pressure 0.42 “H2O 0.38/0.49 “H2O

Fan Dimensions 4.7”H x 4.7”W x 1.25”D (120mm x 120mm x 32mm)

4.7”H x 4.7”W x 1.5”D (120mm x 120mm x 38mm)

Thermostat Dimensions 2.8”H x 1.6”W x 1.4”D (72mm x 40mm x 36mm)2.8”H x 1.6”W x 1.4”D (72mm x 40mm x 36mm)

! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 4

WarrantyRLH is recognized throughout the U.S. in the telecommunications industry for our experience and we stand with total confidence in our quality. This product is warranted to be free of defects in material and workmanship for up to 1 year of service.

RLH Industries, Inc. will repair or replace these products that fail provided the defective part is returned to RLH freight prepaid.

To make a warranty claim, or schedule repair or replacement of your RLH product, please contact us for an RMA number. You will be promptly assisted by one of our warranty specialists. All returns must have an RMA number before we can receive any items.

Technical SupportEmail: support@fiberopticlink.com24/7 technical support: Toll Free 1-855-RLH-24X7

Toll Free 1-855-754-2497

Contact InformationCorporate Headquarters: RLH Industries, Inc.

936 N. Main StreetOrange, CA 92867 USA

Phone: (714) 532-1672Toll Free 1-800-877-1672Toll Free 1-866-DO-FIBER

Fax: (714) 532-1885Email: info@fiberopticlink.comWeb site: www.fiberopticlink.com

! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 5

! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com! Page 6

RLH Industries, Inc.936 N. Main Street, Orange, CA 92867 USAT: (714) 532-1672F: (714) 532-1885

Please contact your RLH sales representative for pricing and delivery information.

Specifications subject to change without notice.