autumnedition autumn edition liftingpumps • fitted aftercoolers • aerodynamic flywheels for...

lifting AUTUMN EDITION

Glasgow: 0141 271 7400 Wolverhampton: 01902 308498AUTUMNEDITION

2018

autoparts garage equipment

AUTUMN EDITIONF O R E V E RY T H I N G W O R K S H O P

Come and join us at Facebook @autopartsgarageequipment

Like our page, ask for a code and get abigger discount through our online shop!

*Purchase

AUTUMN EDITIONVELYEN 4EB0900UK2 Post 3.5 Tonne Hydraulic Lift

Technical Specifications Product approved and certified according to European Machinery Directive 2006/42 / EC and Harmonized Standard EN 1493: 2010.

Arms of 2 sections with minimum height of 90mm.

Automatic arm locking system following UK standard.

Car synchronization and safety against obstacles by cable.

Semi-base low profile to cover oil hoses: 34 mm high.

Double oil hoses protection, CE oil deposit (transparent with level indicator), safety cover against dust, open door protection, feet protection.

Part Number 4EB0900UKDistance between columns 2850mmLoading Capacity 3500kgMinimum Height 90mmLifting Height 1930mmHeight of Pads 90/140mmLifting Time 45 SecondsLength of Arms (min/max) 740/1150mm / 890-1390mmOverall Width 3430mmMotor 3PH 230/400 V 50/60Hz, 2.2KW

Lift Specifications

To get yourinstallationfree on this Velyen 2 Post Lift.Go to our website, click on the FREE INSTALLATION linkand register your details.

SIMPLE!

normal cost £1899saving you£225

only £1674on presentation of your *Free Installation* Voucher

1 Year Warranty

LIMITEDOFFER! LIMITED STOCK!

Terms & Conditions Apply

bestbuys2018_AUTUMN EDITION.indd 1 10/09/2018 12:07:38

02

Tyre Equipment

Glasgow: 0141 271 7400 Wolverhampton: 01902 308498AUTUMNEDITION2018

MS 630-24 and 650 are pneumatic tilting back pole passenger car tyre changers that allow to work with car, light commercial vehicle and motorcycle tires (with special accessories). The 630-24 model is equipped with 24” turntable (external clamping), while 650 is equipped with 28’’ turntable. Both models can be provided with standard bead breaker Ergo Control function. Motor Inverter drive system guarantees the best combination of power and speed needed for an effective service.The MS 650 issupplied as standard with a pneumatic positioning of the mounting tool and theTechnoroller NG that makes easier and faster the work with UHP and RFT tyres.

WR3HP-150S WN5.5HP-200S WRN10HP-270S

WORKHORSE COMPRESSORS

SinglePhase

3hp150L

CFM9

3Phase

3hp200L

CFM9

3Phase

3hp270L

CFM9

Cast iron cylinder block • Air receiver built to latest European Standards 09/105 CE • Heavy duty industrial motor with overload protection Twin cylinder pumps • Fitted aftercoolers • Aerodynamic flywheels for efficient cooling • Slow running pumps giving lower noise levels & longer life expectancy • Automatic stop/start controls.

Voltage: 230 Displacement CFM: 13.0 Free Air CFM: 9.0 Dimensions L x W x H: 1350 x 540 x 1040 Weight: 112kg Noise: 74dBA



only £560

only £1051

only £1787

**NEW PRODUCT LAUNCH**

PURCHASEonline

MS 650 V1Changer with Assist Arm

only £4199Limited Launch Price

Range of application MS650Max wheel diameter up to 1200 mmOutside rim clamping 12” – 28”Inside rim clamping 13” – 32”Rim width 4” – 15” (V8) 4” – 15” (V8)Bead breaker range 70 – 397 mmAir connection 8 – 10 barNet weight 385 kg (V8) 385 kg (V8)Bead Breaking force 11500 NDimensions (W x H x D) 1450 x 2295 x 2010 mm (V8) 450 x 2295 x 2060 mm (V8)

MS 630-24 V1Changer with Assist Arm


Range of application MS 630-24 Max wheel diameter up to 1200 mm Outside rim clamping 10” – 24”Inside rim clamping 12” – 28”Rim width 3” – 12,5” 3” – 15”Bead breaker range 70 – 397 mm Air connection 8 – 10 barNet weight 317 kg 360 kgBead Breaking force 1 1500 NDimensions (W x H x D) 1380 x 2110 x 1840 mm 1450 x 2350 x 2010 mm


03

Tyre Equipment

See our latest offers online at: www.garageequipmentuk.com

The MT 26 D/826 DT are electronic wheel balancers designed for low to medium volume workshops. Thanks to the new extreme versatility and compact size design, the MT 826 electronic wheel balancer series is suitable for working in narrowest environments and with all types of car, motorcycle and lightweight transportation wheels. Supplied with a TFT monitor (MT826 DT), EASYFIT internal electronic measuring arm and a complete software package including all static and dynamic balancing programs. Thanks to the new wheel cover shape and the new weight holders both units are the perfect equipment in the workshop environment.

Highlights:• New Ergonomic wheel cover shape• New weight holder• Up to 820 mm diameter• Max wheel weight 65 kg• Small footprint• Internal electronic measuring arm for rim distance & diameter (MT 826 D/DT)• Optional, external electronic measuring arm for rim width• Many holders for weights and tools• Monitor TFT 19” (MT 826 DT)

Highlights:• New Ergonomic wheel cover shape• New weight holder• Up to 820 mm diameter• Max wheel weight 65 kg• Small footprint• Internal electronic measuring arm for rim distance & diameter (MT 826 D/DT)• Optional, external electronic measuring arm for rim width• Many holders for weights and tools• Monitor TFT 19” (MT 826 DT)

Highlights:• Dual digital LED display• Large protection case for wheels with a maximum diamter of 1,150 mm• Electronic sensor arm to record rim data automatically• Diverend wheel balancing programmes - 11 programmes for passenger cars - 5 programmes for motorcycle - 5 programmes for light alloy rims - Multi User Program• Mechanical brake pedal• Optional: Easyfit data arm with detection function of clip weight and corresponding positioning• Easy change to fix stud adapters and motorcycle flanges

PROA39B 150FT3-3HP 150L PRO B5900B 200FT3-5.5HP 200L PRO B7000 270 FT10 YD - 10HP 270L

ABAC COMPRESSORS The special ABAC patented belt guard design improves greater airflow over the pump. Durability: Slow pump speed reducing operating temperatures and noise. Flexibility: Double outlet, strong handles with grip. Safety: Blockable pivot wheels. Italian design, Itlalian built. Cast iron cylinder block with aftercooler fitted as standard. Automatic stop/start pressure switch.




3Phase

3hp150L

CFM10.1

3Phase

3hp200L

CFM17.7

3Phase

3hp270L

CFM33.9

Beissbarth - MT826DEntry level wheel balancer

Beissbarth - MT826DTEntry level wheel balancer

Beissbarth - MT857DTEntry level wheel balancer

only £592

only £1030

only £1807




**NEW PRODUCT LAUNCH**

PURCHASEonline


04

B£STBUYS

Wheel Alignment


RavTD3000S.B

RavTD3000HP.B

Exclusive aligner with 3D targets. Equipped with 2 space saver sensors and 4 high resistance plastic targets to detect all vehicle angles in just a few seconds. Targets mounted on 4 point clamps.

• Animated Instructions• 30° Run Out Compensation• Easy Alignment• 3DT® Target - extremely light, no electronic components inside, no maintenance required• Lift Level Compensation• Can be used on any 4 post or scissors lift. • Automatic lift level compensation• Megapixel High Resolution Cameras - The base of the sensor can be translated outward by 65 mm in case of extra large vehicles

Version with batteries for fixed or mobile installation. Quick battery change. Includes wiring to recharge batteries at sensors. Equipped with tyre grabbing 3 point clamps to avoid run out compensation. Very quick to use. Remote control located on each sensor. Optional run out compensation

• Animated Instructions• 30° Run Out Compensation• Easy Alignment• 3DT® Target - extremely light, no electronic components inside, no maintenance required• Lift Level Compensation Can be used on any 4 post or scissors lift. • Automatic lift level compensation• Megapixel High Resolution Cameras - The base of the sensor can be translated outward by 65 mm in case of extra large vehiclesextra large vehicles

RAV TD3000 RANGE 3D WHEEL ALIGNMENT TECHNOLOGY

complete withHigh Quality Turntables

complete withHigh Quality Turntables

LEVEL LIFT COMPENSATION

3DT ® TARGET (Solid Vision Technology)

3 POINT QUICK LOCKING TARGETSnow only £10700

£8293nowonly


X431 Pro4 - 2 year package

only £17952 Year Warranty

The X431 Pro 4 from Launch is an advanced automotive diagnostic tool based on the latest Android OS and technology. Supporting American, Asian and European passenger car and light commercial vehicles, this is a market-leading tool for any garage.

Key Features:WiFi and Bluetooth connectivity - Save, share and print report sheetsOBD II functionality - Live date graphing - One click internet updatesManufacturer specific reset and service functions - Smart design with docking station - Special Functions:

- Automatic VIN recognition - New battery registration- ABS brake bleeding - Tyre pressure monitoring- Module programming & re-coding - Service light / oil reset- Key coding / matching - Tyre pressure monitoring reset

Technical Specifications:• 10.1" touch screen • 2GB RAM• 16GB Micro SD • 5.0 mega pixel rear camera• 7000 mAh lithium ion battery • 600mm x 170mm x 415mm

The new KTS 350 is a compact all-in-one tester consisting of a10-inch tablet PC and an integrated communication module. Thanks to this versatile solution, the KTS 350 is ideally suited as a tester for independent workshops, fast fitter or as a second device for mobile use. With the preinstalled Bosch diagnostic application ESI[tronic] 2.0, the KTS 350 provides an efficient overall package for control unit diagnosis, maintenance, troubleshooting and repair.

only £3495

Bosch KTS350 Diagnostic Tablet

SD/SIS ECU Diagnosis andTrouble Shooting Instructions

1 Year £880.00 3 Year £2200.00

SAVING £440.00

Diagnostic Master Package SD/SIS, M, P & TSB

1 Year £1105.00 3 Year £2765.00

SAVING £550.00

Bosch Subscription Options

DIAG-STARTIUM 60-24 is a 3 in 1 advanced battery maintenance system providing everything that is needed for the modern workshop.

GYS DIAG Startium

list £699

now £675

BATTERY SUPPORT (12V ONLY)DIAG-STARTIUM 60-24 provides up to 60A support during diagnostic work. Select the DIAG+ function to set the voltage (range 12- 15V) to meetmanufacturers requirements.

CHARGE TO 100% SAFELY:The advanced multi-stage charger will charge to 100% and does not require supervision or the battery to be removed from the vehicle. At the end of the charge the charger enters a float mode to maintain the battery at 100%.

INTELLIGENT:This device permanently analyses the health of the battery and automatically adjusts the output voltage. The voltage and the percentage of charge aredisplayed in real time on the digitalscreen.

• Timer • SOS Recovery• Automatic Start • Smart Start• Auto Restart (previous settings)• Alternator Test Function• Fault Code Displayed

Additional functions include

05

Diagnostic Units


PURCHASEonline


Lifting Capacity 2500kgFull Rise 1870mmMin Height 115mmLifting Time 45s-50sCapacity of Motor 2.2KwPower Supply Recommend 220v

EE-6503 - 3000kgRecessed Scissor lift

EE-65A .40T.E - 4000kgSurface Mounted Scissor lift

now only£4195

EE-MR30 - 3000kgMobile Scissor lift

Ideal for tyre service and narrow bays.Mobile or fixed mount design. 3000KG. lifting capacity. Electrical released safety locking system. Durable cylinders with anti-surge valves. 24V safe control system. Height limit switch. Powder coated finish. Self-lubricated brushing and bearing.

only £2250

110mm (4 5/16”) initial height • Four cyl-inder design. Pneumatic safety locking system. Drive-on ramps lock into position as platform extensions. Steady raising and lowering, no noise when loweredto ground • Durable cylinders with an-ti-surge valves. 24V safe control system. Powder coated finish. Self-lubricated brushing and bearing

• 4000KG(9000LBS.) Lifting capacity • Surface or recessed mount • 1300mm(5 1/8”) Initial height • Four cylinder design • Pneumatic released safety locking system •Drive-on ramps lock into position as platform extensions • Steady raising andlowering, no noise when lowered to ground• Durable cylinders with anti-surge valves • 24V Safe control system • Height limit switch • Powder coated finish • Self-lubricated brushing and bearing • Aluminium motor with fan on top to avoid over-heating caused by long time working

Lift Specifications

CE certified by SGSUK. Mobile Positioning based on Pallet Jack System. Electrical Safety Lock Release System. Aluminium Motors. Screw Action HeightAdjustable Pads with clearance height <15mm. Power Coated Finish. Door Protection Pads. ABS Control Box. Anti-Surge Hydraulic Valve. Hydraulic System with Fixed Pressure. Hydraulic Connection for optional manual operated pump.

normal price £3595

now £3545

• CE certified by SGS UK. • Electrical Safety Lock Release System.• Aluminum Motor. • Screw Action Height Adjustable Pads.• Powder Coated Finish. • Anti- Surge Hydraulic Valve. • Automatic Engaging Arm Locks.

EAE EE-612E2.5 Tonne - Mobile Single Post Lift

EAE EE-6254E Electronic4 Tonne - Symmetric

only £2250

ALL EAELIFTS INCLUDE

FIRST SERVICE** 1 x 6 Month Service

06

2 Post Vehicle Lifts


now only£3195

Lifting Capacity 4000kgLifting Height 1900mmMin Height 90mmLifting TIme 55sCapacity of Motor 2.2Kw / 3.5KwPower Supply 1 or 3 Phase

Lift Specifications


Ideal for tyre service and narrow bays.Mobile or fixed mount design. 3000KG. lifting capacity. Electrical released safety locking system. Durable cylinders with anti-surge valves. 24V safe control system. Height limit switch. Powder coated finish. Self-lubricated brushing and bearing.

now £3545

07

2 Post Vehicle Lifts


was £7949

£77503 Year Warranty3 Year Warranty

was £2450

£2395was £5863

£57203 Year Warranty

Rotary SPO55M5500kg Hydraulic Lift

Rotary SGL353500kg Hydraulic Lift

Rotary SPO40M-52 Post 4500kg Symetrical Lift

list £3150 list £3880

now £2959 now £36903 Year Warranty 3 Year Warranty

Rotary SPO65M6500kg Hydraulic Lift

• Fully hydraulic.• Asymmetric design.• 3500kg lifting capacity.• Baseless design.• Narrow bay width.• Optional electronic latching.

• Fully hydraulic.• Asymmetric design.• 4500kg lifting capacity.• Baseless design.• Narrow bay width.• Optional electronic latching.

Capacity: 4500 kgStroke: 1979 mmLifting time: 30 secondsOverall width: 3496 mmOverall height: 4170 mm

Capacity: 3500 kgStroke: 1959 mmLifting time: 26 secondsOverall width: 3000 mmOverall height: 3865 mm

Switchoff level: 4065 mmRequired ceiling height: 4230 mmDrive-through width: 2602 mmDriving power: 4.0 kWPower Voltage: 400/50V/Hz

Switchoff level: 3760 mmRequired ceiling height: 3920 mmDrive-through width: 2336 mmDriving power: 4.0 kWPower Voltage: 400/50V/Hz

ROTARY SPO40M-5 SPECIFICATIONROTARY SPOA3TM SPECIFICATION

Rotary SPOA3TM2 Post 3500kg Lift


KPH370.42K / 4200 kg2 Post 4200kg Hydraulic Lift

KPS327HK / 3200 kg2 Post 3200kg Hydraulic Lift

normal price £2699

now £25992 Year Warranty

• Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position.• Synchronization cables grant the levelling of the two carriages.• Automatic arm locking during lifting and automatic unlocking when the arms reach the floor.• Each column features a maintenance-free lifting cylinder.

normal price £3350

now £31992 Year Warranty

£3099 £3199 £5959P/N RAV306H P/N RAV370.32K P/N RAV370.55LIK

KPH306H / 3200kgg3200kg H-Frame Lift

KPH370.32K / 3200kgg3200kg Tonne Hydraulic Lift

KPH370.55LIK / 5500kgg5500kg Hydraulic Lift

2 Year Warranty 2 Year Warranty 2 Year Warranty

• The small-sized base allows easy access into the working area.• Three stage short arms provide asymmetric lifting off-road and large vehicles. Min. pad height 95mm. Two stage short arms.

LIK VERSION AVAILABLE FOR LONG WHEEL BASE VEHICLES

B£STBUYS

B£STBUYS

B£STBUYS

08

Lifting Equipment



09

Lifting Equipment


RAVAGLIOLI 518NL / 3500kgFull Rise Scissor lift

RAVAGLIOLI 1450N 3200kgMid Rise Mobile Scissor lift

It is ideal for use in the following environments:Tyre Shops • Mechanical Repairs • Rapid Fit Facilities

The RAV 518NL extra low profile scissor benefits from Auto-levelling - Allowing the platforms to level back up with one another once back at ground level. Mechanical Lock - Which helps to ensure maximum safety for the user whilst the lift is extended and holding a load.

normal price £4758

now £4550normal price £2999

now £2859

wheel kit included

The ideal lift for servicing tyres, brakes, suspension and bodywork. This lift of the latest generation has the following features: electro-hydraulic operation, high loading capacity and elevated lifting height, rapid cycle times. Being practical and easy to use, this lift guarantees the maximum safety to the user.

LIFTINGBLOCKSINCLUDEDWith RAV518NL Scissor Lift

RAVAGLIOLI 4000 SeriesService & Alignment lifts

2 Year Warranty

Main technical features• The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected.• High-resistant, galvanised and pre-stretched metal cables.• Large-diameter pulleys with self-lubricating and maintenance-free bushes.• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables.• Immediate-triggering safety stud devices in case a cable slackens or fails.• Automatic anti-toe trap alarm during final stages of lift descent.• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking.• Low-voltage (24V) electrical system with control circuit.

Ravaglioli 4401 - 4 Tonne4 Post Hydraulic Standard Service Lift RAV635.iMOT4

normal price £5115

now £4796


130mm Low Profile options

2000 - 3000kg Jacking Beam

Head Light Beam Tester

OPTL Packages

OPTL Upgrade Ancillary Pack

MODEL Lifting Minimum Platform Platform Normal Weight kg Profile Width Length Price

RAV4400.3MOT4 4000 130mm 560 4460mm £10899RAV4401.3MOT4 4000 160mm 630 4480mm £11199RAV4500.3MOT7 5000 175mm 630 5700mm £12399

10

MOT Equipment


• Supplied with a 1700mm double-extending top beam as standard• Provides 260mm of lift as standard• Low height to suit vehicles with low clearance• Support arms available to suit all makes of lift• Support arms included to suit all makes of lift*• Ultra-low jacking position

2t - 2.8t Major lift Jacking Beams

2.0 Tonne

now £9992.8 Tonne

now £1299

5 Year Warranty

LIFTINGBLOCKSINCLUDED

DVSA approved, provides all the featuresyou might need, including latest windowsoperated PC with 23” Monitor, 10” Tablet, 4wd testing, remote control, soft startmotors, roller covers and bi-directional operation.

Can be upgraded to Motorcycle testing or a full test lane including Shock Absorber Testing and Side Slip. Split bed version also available.

2t - 3t Scope Jacking Beams

2.0 Tonne

now £799

Class IV ATL

Class IV & VII ATL

Class I & II upgrade available

only £9727

only £10950

3.0 Tonne

now £999

LIFTINGBLOCKSINCLUDED• Double extending arms (extends to 1610mm).

• A large range of roller support arms to suite almost any ramp or pit.• Ram and scissors are robust and designed to provide effective performance.• Multi-stage safety lock, Finger guards and a pressure release valve.• A test certificate comes with every jacking beam.

5 Year WarrantyClass IV & VII ATL Brake Testercomeswith 10" tablet

new product


Class IV 4 Post ATL Deal

Class IV ATL Scissor Lift Deal

Class VII 4 Post ATL Deal

Class VII ATL Scissor Lift Deal

now £19799

now £22199

now £22799

now £26900

Package Includes: RAV4400.3IMOT4 - ATL Brake Tester - 2000kg Jackiung Beam Head Light Beam Tester - Full Ancillary Package

Package Includes: RAV635I.MOT4 4600mm- ATL Brake Tester - 2000kg Jacking Beam Head Light Beam Tester - Full Ancillary Package

Package Includes: 4 Post ATL Lift 5700mm - ATL Brake Tester - 3000kg Jackiung BeamHead Light Beam Tester - Full Ancillary Package

Package Includes: RAV650I.MOT7 5500mm - ATL Brake Tester - 3000kg Jacking BeamHead Light Beam Tester - Full Ancillary Package

Add Premier Gas & Smoke for only £4500




Calibration andMaintenance Packages

1 Year MOTCare Package

3 Year MOTCare Package

* 6 monthly / ** 12 Monthly * 6 monthly / ** 12 Monthly£499 £1449Servicing: Lift Service* / Jacking Beam Service*

Calibrations: Gas* & Smoke** / Brake Tester* / Beam Tester*

SAVING£996

SAVING£316

normally £815 normally £2445

11

MOT Equipment

See our latest offers online at: www.garageequipmentuk.combestbuys2018_AUTUMN EDITION.indd 11 10/09/2018 12:07:49

12

Oil & Lubrication


The unit is discharged with a 1:1 pressure ratio pump, located at the back of the unit, through a 1.5 m discharge hose with a dry break quick coupler.

Control gun with reinforcedpolyamide body and stainless steel valve mechanism for use with fluids like windshield washer, glycol solution (anti-freeze) and other water based fluids. Includes brass inlet swivel and flexible outlet with 90º angled outlet.

Samoa metered control valves are used at end of hoseassembly for measured dispensing of lubricants and antifreeze solutions.

The unit is discharged through a discharge hose pressurizing the unit at 0.5 bar (3.5 psi) by using a tyre inflator. The unit includes a safety valve, that prevents overpressure, and a 1.5 m discharge hose

100Lt Mobile Waste OilPump Discharge

100Lt Mobile Waste OilPressure Discharge

PURCHASEonline

PURCHASEonline

PURCHASEonline

PURCHASEonline

PURCHASEonlinePURCHASE

online

PURCHASEonlinePURCHASE

online

PURCHASEonline

OIL, ANTIFREEZE, AIR & WATER506202 1/2”Bore 10Mtr506222 1/2”Bore 15Mtr

LOW PRESSUREAIR & WATER506101 3/8”Bore 10Mtr506121 3/8”Bore 15Mtr

Spill pallets for 1 drum for static spill contain-ment. Removable platform. Remove drums before fork lifting. Compatible with most fork-lifts and drum pallet trucks. Made from 100% polyethylene. Capacity 230 Litres

Spill pallets for 2 drums for static spill containment. Removable platform. Remove drums before fork lifting. Compatible with most forklifts and drum pallet trucks. Made from 100% polyethylene. Capacity 250 Litres

Covered spill pallet to accommodate 2 x 205Ltr drums. Unit is accessible to both sides via two tough flexible sliding shutter doors. Rigid, double walled and #weather tight PE hardcover. Capacity 250 Litres

Compact steel cased hose reel for air. All reels include pivoting wall bracket andtextile braided polyurethanehose. Maximum workingpressure: 20 bar(285 psi).

Hose Reels506 SERIES SINGLE ARM HOSE

1 Drum Spill Pallet

Fluid Control Gun Metered control fluid gun

2 Drum Spill Pallet 2 Drum Covered Spill Pallet

Compact Air Reels

now £149now £135P/N: 500115

15Mtr x 8mm

now £225now £230P/N: 506202

10Mtr x 1/2"P/N: 506101

15Mtr x 3/8"

P/N: 50011612Mtr x 10mm

now £429P/N: 372200

now £295P/N: 372400

P/N: EP1001 P/N: EP1002 P/N: EP9002

only £149 only £169 now £750

now £65 now £135

GET A FILL UP JUG WITH EVERY SAMOA

PRODUCT WHEN PURCHASED

ONLINEgarageequipmentuk.com

P/N: 186300

P/N: 365535


13

Pressure Washers


PURCHASEonline

MH 5M-100/760PA - 240V

THERM CA11/130KRANZLE PRESSURE WASHERS

NILFISK PRESSURE WASHERSMH 4M-100/680PA - 240V

QUADRO 11/140TST Auto

MC4M-140/620XT 240v

HD 10/122

• Pollution free electrical heating• Three stage water tank heating for precise temperature control and fast heating effect• 1450 rpm motor with low noise level• Quick Service concept reduces maintenance costs• Easy to use control panel, all controls in one place• Ergo accessory system for additional user comfort

Integrated trolley takes rough ground in its stride with large wheels and solid rubber tyres.• Integrated hose drum with foldable crank (option)• 5meter power lead with cable reel• One piece trigger gun with safety catch M2000 and lance with flat jet nozzle.• Storage for trigger gun with safety catch and lance• Shock absorbing buffers, front and rear• Water flow monitoring• High pressure detergent

• High efficiency 4 pole motors • EcoPower boiler with EcoMode function • Brass pump head 3 ceramic pistons• Pressure activated unloader system • Innovative de-sign with 4 big wheels • Easy to transport, can even be pushed/pulled across uneven surfaces • Flow activated unloader system • Oil tank and oil sight • Low pump oil warning system • Low fuel warning system• Onboard diagnostic function

Comes with 15mtr hose reel and Dirt Killer• Integrated trolley takes rough ground in its stride.• Integrated hose drum with foldable crank• 5meter power lead with cable reel• Dirt killer lance with stainless steel pipe, stainless steel lance with flat jet nozzle• Storage for trigger gun with safety catch and lances• Shock absorbing buffers, front and rear• Total-Stop system• Water tank• High pressure detergent• Parking brake

• Industrial Cold Water High Pressure • Cleaner 1450 rpm pump.• 3 ceramic pistons.• 4l detergent tank (Optional for POSEIDON 4 28).• Ergonomic design.

Mobile, Compact and Practical• Absolutely convenient, space saving and compact design• Can with stand voltage fluctuations• Easy start• Slow running, silent and durable 4 pole (2800rpm) electric motor.• runs 10 L/min -30-120 bar

only £2399

only £2795 only £1079only £425

only £2199 only £850

DEMOAVAILABLE

DEMOAVAILABLE

DEMOAVAILABLE DEMO

AVAILABLE

DEMOAVAILABLE


14

Garage Essentials

COILSPRINGCOMPRESSORS


Hercules SIMPLY 2.0 Air Pneumatic HEAVY DUTY Coil Spring Compressor with TWIN CYLINDERS Professional Air Operated Coil Spring Compressor 2400kg Thrust Force

• Heavy Duty Pneumatic Operated Unit that gives a massive 2400kg Thrust Force. • Ideal for all types of springs including compressing larger springs such as MPV's, 4x4's, Mercedes, Nissan Navara & Light commercial.• Heavy Duty Triple Bar Safety Cage that unless lowered and locked will not allow the machine to operate. • Safety Rope to prevent the coil spring ever leaving the machine (if loaded incorrectly).• Unique Patented Jaw system comes with every machine that allows you to compress almost any spring on the market today. As our jaws are patented it means our unique safety system cannot be copied. Therefore check out other manufactured models that offer inferior jaws or machines that need multiple jaws at greater expense to do the same job!

Heavy Duty Pneumatic Coil Spring Compressor C/W Safety Valve Locking System Auto levelling upper arms allow to work easily both on conical &misaligned springs. Cylinder is made in light alloy & nylon resin with fiberglass to avoid corrosion & oxidation Foot-pedal works only when the safety valve is closed Supplied with small & large Jaws & Strut Vice Suitable for Cars, SUV’s & Light Commercials

Specification: Operating Air Pressure: 5-10bar Thrust Power: (kg) 2400kg (10bar) Stroke: 44cm/440mmWeight: 70kg Dimensions: (W) 50cm x (D) x 40cm x (H) 120cm

Specification: Operating Air Pressure: Min 6 bar / Max bar Compression Force: 1200kg Stroke: 330mmWeight: 65kg Dimensions: 650 x 400 x 1400mm

Hercules SIMPLY 2.0 Air PneumaticHEAVY DUTY Coil Spring Compressor

ALB40225B UNIVERSAL HEAVY DUTY SUSPENSION WORKSTATION

now only£1495

now only£1423


15

Garage Essentials


Mini-Ductor II+ Coil Kit

GET

AN

EXT

RA

5% O

FFW

HEN

PU

RCH

ASED

ON

LIN

Eus

e co

de: m

inid

ucto

r

• 220V Handheld Induction Heater & Flameless Torch

• The Mini-Ductor II+ is the professional’s choice handheld, flameless torch and leverages the power of Invisible Heat® to heat ferrous metals in seconds. Using high-frequency magnetic fields, the Mini-Ductor II+ releases corroded or frozen hardware and other metallic components from corrosion and thread lock compounds – all without the collateral damage normally associated with torches.

• Using one of the included coils that can flex around corners a flame cannot, the Mini-Ductor heats a 3/4″ nut red hot in 15 seconds.

• With a new integrated CE filter and 220/230V power supply, the Mini-Ductor II+ model meets the power requirements of most commercial automotive garages, workshops and bodyshops, who use 220V onsite. The power supply includes plug variations for use in Europe, UK and Australia.

P/N: ZJSLSL2S P/N: ZJSLESTART3012

Jump Starter Power Pack Lithium (LiFePO4) 800Amp

RoadStart® Emergency Jump Starter 12V 3200 Peak Amps

ElectroStart® BatterylessPower Start 3000A 12V

£399.95 £424.95 £519.95

A dedicated 12V jump starter pack that benefits from being a compact, lightweight unit that also provides high power output

P/N: ZJSLSTART320£199.95

Jump Starter Power Pack Lithium(LiFePO4) 400A

A dedicated 12V jump starter pack thatbenefits from being compact and lightweight and also provides a high amperage output. Capable of starting the average 3ltr petrol or 2ltr diesel engine.

P/N: ZJSLSTART320£219.95

Starter/Charger 32045Amp 12/24V 230V

Heavy-duty starter/charger for professional garages, workshops and bodyshops. Caters for all requirements from cars right up to light commercial vehicles.

£324.95

£640.00

Starter/Charger 420/60Amp 12/24V 230V

Heavy-duty starter/charger for professional garages, workshops and bodyshops. Caters for all requirements from cars right up to light commercial vehicles.

Two batteries con-nected in parallel give high peak and cranking currents. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Innovative patented technology with no internal battery so no need to wait hours for the unit to charge before use. Simple and safe to use with no long term battery storage issues.

P/N: ZJSLSTART20

exclusive web only offers

Purchase any of these Chargers / Boosters ONLINE & get a complimentary pair of 3mtr CCA 220Amp Booster Cables

P/N: ZJSLSL2S


• High/low manual heat regulation• Efficient, clean, virtually soot-free combustion using: Bio Oil, Bio Diesel, Heating oil or any combination of these• All models complete with built-in fuel tank, filters & fuel pump• Equipped with overflow, overheat and flame failure systems• AT400 & AT500 Incorporate a burner drawer system for easier lighting and cleaning plus a heat exchanger for higher efficiency

MANUAL IGNITIONUniversal Bio Oil Heaters

• Heaters that have a perforated combustion chamber (models AT306 & AT306THERMO) are not recommended for use in workshops where there are explosive vapours present.• Combustion air intake kits are available for extra safety in garage workshops, either horizontally through an outside wall or vertically taking air into the combustion chamber from two metres above ground level. Except models AT306 and AT306THERMO

Complete flue kit included

• Heat capacity: 85,000 Btu/hr min. to 146,000 Btu/hr max.

• Heat capacity: 130,000 Btu/hr min. to 210,000 Btu/hr max.

• Heat capacity: 68,000 Btu/hr min. to 102,000 Btu/hr max

• Heat capacity: 68,000 Btu/hr min. to 102,000 Btu/hr max

AT500 INCLUDESFLUEKIT AT400 INCLUDES

FLUEKIT AT307 INCLUDES

FLUEKIT AT306 INCLUDES

FLUEKIT

LIST: £3740

now £2695P/N THERMAT500

LIST £3180


LIST £1540


LIST £2295


DIRECT OIL FIREDSPACE HEATERS

TC15 69,000 350 1.87 16 230 POATC25 92,000 400 2.51 34 230 £300.00TC40 122,000 900 3.30 41 230 POATC45 148,000 1100 4.00 41 230 £337.50

Max Heat Heated Approx. Tank Electrial AUTUMN P/N Output Air Flow Consump Capacity Supply EDITION (Btu/hr) (m3/hr) (Ltr/hr) (Ltrs) (Volts) PRICE

• Very mobile, economic and highly reliable• Robust, compact design• High efficiency combustion• Stainless steel combustion chamber• Use with paraffin or diesel• Fast temperature rise• Room ventilation is required

The Department for Environment, Food and Rural Affairs (DEFRA) (SEPA - in Scotland) have announced changes to permits for operating Small Waste Oil Burners (SWOBS). For full details please visit www.thermobile.co.uk

Glasgow - Telephone 0141 271 7400 151 Kilbirnie Street, Glasgow G5 8JH.Wolverhampton: Telephone 01902 308498Bearing Drive, Wolverhampton WV11 3SZ

click on to www.garageequipmentuk.com

ALL PRICES QUOTED EXCLUDE V.A.T. PRICES APPLY TO MAINLAND UK ONLY. OFFERS ARE SUBJECT TO THIS ISSUE AND CAN NOT BE USED IN CONJUNCTION WITH ANY OTHER OFFER. All lift prices include delivery & installation on to a ready prepared site excluding any civil or electrical works (unless otherwise stated). A weight test can be carried out free of charge provided suitable certified vehicle or weights are supplied at the time of installation. (This service is chargeable if carried out, outwith installation). Other products are ex-works delivery only. Offers subject to availability. Errors and Omissions Excepted. All prices are correct at time of going to press. Autumn Edition 2018. Prices available until 31st October 2018. IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY.


autumnedition autumn edition liftingpumps • fitted aftercoolers • aerodynamic flywheels for...

Documents