automotive material solutions...low tvoc: vda 277 characteristics benefits • low tvoc: vda277 (
TRANSCRIPT
Automotive Material Solutions
The
FuTu
re o
F Au
Tom
oTiv
e
03Automotive Material Solutions
We are committed to producing high-performance materials and developing optimal solutions to create the future for automotives in close partnership with you.
Contents
Product Overview 04
Products 06
Properties Guide 26
Integrated Solutions 28
Global Network 29
05Automotive Material Solutions
Product overview
LIGHTINGHigh Heat Resistant PBT, High Gloss and Low Gas PC/ABS, Diffusion PC
Automotive head and rear lamps are composed of many engineering plastic components such as lenses, bezels, and reflectors. We not only provide highly transparent PC and low emission high heat ABS, but also low gas PBT for direct metallization, designed to reduce costs and boost productivity.
STRUCTURE Conductive and High Heat Resistant PA/PPE/CNT, Dimensional Stability PBT/ASA/GF, Low Temperature Impact PC/PBT
Replacement of steel by our composite materials PA/PPE and PBT/ASA leads to an effective weight reduction. Incorporation of carbon nanotubes (CNT) or glass fibers (GF) renders the corresponding parts electrically conductive and mechanically stiff, thus providing easy paintability and dimensional stability.
INTERIORLow Gloss ABS, Low Gloss PC/ABS, Low TVOC ABS, High Flow PC/ABS, High Stiffness PC/ABS/GF
Plastics for automotive interior applications require a well-balanced set of thermal and mechanical properties. In addition, a high resistance to chemicals and a low content of TVOC are necessary. Our PC/ABS alloys represent an ideal solution to all these different challenges.
page # 06
EXTERIORMetal Plating ABS and PC/ABS, Weather Resistant ASA and PC/ASA, High Flow PC/PET, Reinforced PC/PET
Our engineering plastic resins including ASA and PC alloys are characterized by an excellent weather resistance, which makes them suitable for exterior applications such as radiator grilles and mirror housings.
page # 11
page # 21
page # 24
page # 17
SAMSUNG SDI04
07Automotive Material Solutions
inTerior Low Gloss ABS, PC/ABS
SL-0100 (ABS, Extrusion)
LH-0300
(ABS, Injection)
WP-1098 (PC/ABS)
LX-1098F(PC/ABS, Luminous)
BeneFiTS
• Good weatherability
• Good impact strength
APPLiCATionS
• Center fascia
• Air vent cover
starexⓇ, INFINOⓇ low gloss ABS and PC/ABS resins have been developed for paint-free applications. These UV-stabilized products still feature the excellent mechanical and thermal properties typical for these materials.
ReferenceWP-1098
Tool
tem
p.
Gloss Change by Tool Temperature
Tool Temp. WP-1098 Reference
30°C 22 28
60°C 33 40
90°C 63 76
ChArACTeriSTiCS
Product Line-up
ABS PC Alloys
Matt ABS (Gloss 10 ),
Extrusion
SL-0100
Mid-Heat ABS
(Gloss 30 ), Injection
LH-0300
PC/ABS (Gloss 30 ),
High impact, Injection
WP-1098
PC/ASA (Gloss 30 ),
Injection
WR-7250HS
heAT reSiSTAnT
General Purpose SR-0300
SR-0310FM
SR-0320 K
SR-0325LT
SR-0330M
SR-0340M
Low TVOC
SR-0320LT
SR-0325LT
Low GLoSS
Super Low Gloss SL-0100
High Heat Resistant LH-0300
MG-0330
ABS
GenerAL PurPoSe
HP-1000XA
HP-1000X
hiGh FLow
WP-1069
WP-1089
Low GLoSS WP-1098
Paint-free
LX-1098F
Low GLoSS WR-7250H
AnTiSTATiC WR-7390AT
PC/ABS
WP-1100
WP-1200
PC/ABS/GF
PC/ASA
inTerior
World’s first premium non-painting material solution, LX-1098F designed to fit the 2015 MY Ford Mondeo.
➊ Center Stack Finish Panel
➋ Console Finish Panel
➌ Shift Surround Bezel
Eco-friendly Process Differentiated Metallic-look
Flow-mark & Weld-line Reduction
Paint-free Luminous Solution
UV & Heat Resistance Modulus, Stiffness
Scratch & Mar Resistance
Performance for Auto Interior
LuminouS PC/ABS LX-1098FINFINO®
AU T OMO TIVE
Samsung SDI Chemical wInS SPE Automotive Innovation Awards➊
➋➌
SAMSUNG SDI06
09Automotive Material Solutions
inTerior
Low TvoC ABS
SR-0320LTSR-0325LT
Low TvoC: vDA 277
ChArACTeriSTiCS
BeneFiTS
• Low TVOC: VDA277 (<50μgC/g)
APPLiCATionS
• Center console
• Window switch panel
starexⓇ low TVOC ABS is characterized by a low emission of volatile chemicals. As this property is mandatory for automotive interior applications due to health and comfort reasons, these materials are a must-have.
25
0
50
75
100
SR-0320LT Ref. A Ref. B
10 PPM
heat resistance
SR-0320LT Reference
HDT 94°C 92°C
Heat Sagging
(90°C)4mm 5mm
Heat Sagging
(95°C)9mm 10mm
high Flow PC/ABS
BeneFiTS
• High flowability
APPLiCATionS
• Center fascia
• Air vent
INFINOⓇ high flow PC/ABS is able to meet the needs imposed by big injection parts or complicated mold designs.
WP-1069 WP-1089
inTerior
Impact Strength Maintenance Rate
ChArACTeriSTiCS
Sustainability of impact Strength Property Balance
WP-1098 WP-1069 Reference (PC 65%)
Thermal Stability (Gloss Change, 270°C * 10min.)
WP-1069 Reference
Before After Before After
99.1 95.9 101.8 87.6
Gas silver Flow mark and discoloration
Gloss (60’)
▲ Gloss = 3.2 ▲ Gloss = 4.2
before after before after
Izod Impact, notched, 23°C
(kgf∙cm/cm)
Thermal Stability (270°C)
Izod Impact, notched, -30°C (kgf∙cm/cm)
Spiral Flow, 250°C, 2mm
(cm)
Heat Deflection Temp.
95°C Very bad
bad
normal
good
Very good
100°C
105°C
110°C
115°C
2530
3540
3035
4045
50
55
60
65
WP-1069 Reference
50%
100%
No Aging After 1000hrsin 70°C/80RH%
94%
73%
(ISO 180, IZOD impact)
SAMSUNG SDI08
11Automotive Material Solutions
high Stiffness PC/ABS/GF
BeneFiTS
• High impact strength
• Dimensional stability
APPLiCATionS
• Instrument panel
• Glove box
• Metal-back molding
Glass fiber (GF) reinforced PC/ABS combines excellent dimensional stability with good ductility, which makes these materials useful for structural applications.
WP-1100WP-1200
ChArACTeriSTiCS
Dimensional Stability
TD Isotropy
MD
After Injection
MinimizedGF allignment
After Cooling
INFINOⓇ PC/ABS/GF shows good dimensional stability
SamsungPC/ABS/GF
Difference
WP-grade Reference
impact Strength
Ref.WP-1200
high Flowability
WP-1200 Reference GF 20%
MFI
42
40
38
36
34
32
30
6%
WP-1200 Reference GF 20%
12
10
8
6
5%
Strengthened bonding between resin and GF
“High Modulus & Impact Strength”
eXTeriormeTAL PLATinG MP-0160 R
MP-0670
BLow moLDinG BM-0320 J
ABS
AE-2230
AE-2130
PC/PET/MF
WR-7000
WX-7010
PC/ASA
GenerAL PurPoSe WP-1059
meTAL PLATinG WP-1041
WP-1041G
PC/ABS
PAinTinG AE-3060
PBT/PC
GenerAL PurPoSe
WR-9120J
WR-9300HF
WR-9330I
heAT reSiSTAnT
WX-9300UV
WX-9310UV
WX-9330UV
ASA
AE-2030
PC/PET
AR-6508
PBT/PET/GF
inTerior
SAMSUNG SDI10
13Automotive Material Solutions
· Matrix SAN composition is not optimized
Under etched
Pit 4.5
Adhesion 250
Pit 6.2
Adhesion 387
Incompletely etched· Rubber dispersion
is not regular in SAN phase
· Matrix SAN composition optimize
· g-ABS dispersion and content control
Regularly etched
Pit 1.7
Adhesion 415
metal Plating material
starexⓇ, INFINOⓇ metal plating ABS and PC/ABS have to be perfectly homogeneous on the molecular level in order to maximize regularity of etching. A uniform etching pattern not only provides for a high adhesion strength but also for an optimally smooth surface appearance without any pits. The right rubber and rubber particle size, as well as the technology to evenly distribute the rubber particles in the resin, are the keys to success.
MP-0160 R MP-0670 WP-1041G
ChArACTeriSTiCS
BeneFiTS
• Excellent surface
• High adhesion strength
• Quality consistency
APPLiCATionS
• Radiator grille
• Rear garnish
• Emblem
• Outside mirror
• Door handle
metal Plating ABS (MP-0160 R, MP-0670)
metal Plating PC/ABS (WP-1041G)
Good Surface Quality without Pitting Good Surface Quality without Pitting
WP-1041G Reference 1 Reference 2
Well dispersed rubber and quality consistency
Conventional Improved ABS
Thermal Cycle Test Result
Adhesion Strength [g]
MP Series Reference 1 Reference 2
OK 1,020 790 520
Result (Blister)
* Cycle: 70˚C (1Hr.) → 25˚C (0.5Hr.) → -30˚C (1Hr.) → 25˚C (0.5Hr.)** Cycle No.: 4 times
Schematic Diagram
Properties
weather resistant ASA
Samsung SDI Chemical’s WX ASA and PC/ASA series have been optimized with respect to weather resistance. The unmatched heat- and light resistance in combination with good impact strengths make these materials perfect for exterior applications.
WX Series
ChArACTeriSTiCS
BeneFiTS
• Superior weather performance
• High impact resistance
• Longer term retention of“Fresh and New” appearance
APPLiCATionS
• Outside mirror
• Radiator grille
• Pillar
excellent weatherability
Grade Selection
Properties
Grade WX-9300UV WX-9310UV WX-9330UV
FDI (N/J) 3,430 / 28 3,400 / 28 3,590 / 29
Dupont Drop 12% 10% 10%
(Destruction Rate)
dE 2.8 2.5 2.6
Gloss 44% 40% 31% Retention
MI 12 6.0 4.5
VST 98 101 103
Impact Resistance
Weatherability (3,000h)
Weatherability (3000h) Impact Properties
Delta E Gloss Retention IZOD FDI
Conventional ASA 5~10 < 5% < 15 25~27
starex® WX Series ≤ 3 25~40% 19~21 28~29
Performance Improvement
+ 40 % + 400 % + 25 % + 15 %
Grade
Heat Resistance High Heat Resistance Super High Heat Resistance
WX-9300UV WX-9310UV WX-9330UV
eXTerior eXTerior
SAMSUNG SDI12
15Automotive Material Solutions
high modulus PC/PeT
AE-2030AE-2130 AE-2230
INFINOⓇ PC/PET and PC/PET/MF are characterized by a good paintability while minimizing surface defects after the painting process, thanks largely to its excellent dimensional stability, high toughness and low CLTE.
BeneFiTS
• High impact strength
• Good toughness and low CLTE
• Dimensional stability
APPLiCATionS
• Radiator grille
• Door handle
• Rear spoiler
• Garnish
PC/PeT/mF: Ae-2130, Ae-2230
Schematic Diagram Injection Molding Specimen
AE-2130: 5% MF, AE-2230: 20% MF
MF dispersion optimize
Gate
Good surface finish
Gate
MF aggregation
Gate
Flash, flow mark
Gate
Improved Surface Quality
ChArACTeriSTiCS
PC/PeT: Ae-2030
Surface Quality
AE-2030 has better gloss and shows good paintability
AE-2030 Reference
98 80
Der
ive
Dim
ensi
on C
hang
e (μ
m/°
C)
Dim
ensi
on C
hang
e (μ
m)
Temperature ℃-20 0 20 40 60 80-40
-60
-40
-20
0
20
-0.2
0.2
0.6
1.040.01Alpha=75.63μm(m°C)
CLTE: 75 x 10-6/°C
Gloss (60°)
Dimension Stability (Low CLTE & Low Warpage)
-20.01°C
eXTerior eXTerior
weather resistant PC/ASA
Samsung SDI Chemical’s WX ASA and PC/ASA series have been optimized with respect to weather resistance. The unmatched heat- and light resistance in combination with good impact strengths make these materials perfect for exterior applications.
WR-7000WX-7010
BeneFiTS
• Superior weatherability
• High Impact resistance
• Good thermal stability
• Good flowability
APPLiCATionS
• Radiator grill
• Outside mirror
• Roof rack
• Rear spoiler
ChArACTeriSTiCS
PC/ASA WR-7000
PC/ASA WX-7010
WR-7000 Reference
WR-7000 Reference
Flowability
Impactresistance
WeatherabilityColor
performance
Thermalstability
100
80
60
40
20
Flowability
Impactresistance
WeatherabilityColor
performance
Thermalstability
100
80
60
40
20
Test Method: SAE J 1960 (Standard BK Color)
Test Method: SAE J 1960 (Standard BK Color)
Change of dE
2
0
4
5000 15001000
dE
Test Time (Hr)
Change of dE
2
0
4
10005000 20001500
dE
Test Time (Hr)
SAMSUNG SDI14
17Automotive Material Solutions
LiGhTinGheAT reSiSTAnT SR-0300
SR-0320 K
SR-0325LT
SR-0330M
ABS
GenerAL PurPoSe LT-1100
LT-1220
SoLiD oPTiC FX-8500
LiGhT DiFFuSion LT-1220
PC
GenerAL PurPoSe HP-1000X
hiGh FLow WP-1069
WP-1089
hiGh GLoSS/Low GAS HP-1000XG
PC/ABS
GenerAL PurPoSe WR-9330I
WR-9370
ASA
GenerAL ASF-9810F
Low GAS ASF-9810FM (High Flow)
ASF-9810FL (Medium Flow)
PBT
high Flow and high impact PC/PBT
INFINOⓇ PC/PBT was designed for automotive exterior applications requiring a mix of high impact strength, good chemical resistivity, and excellent dimensional stability.
AE-3060
BeneFiTS
• High toughness
• Good dimensional stability
• High flowability
APPLiCATionS
• Door handle
• Roof rack
• Pillar
ChArACTeriSTiCS
Good impact performanceat room/low temp
· Mold temp.: 60°C· Nozzle temp.: 260°C· Specimen thickness.: 2mm
high Flowability
Spiral Flow Test
AE-3060 Reference 1 Reference 2
(kgf
∙cm
/cm
)
10
5
0
15
20
25
[ -30°C]
high impact Strength
Notched IZOD
AE-3060 Reference 1 Reference 2
(kgf
∙cm
/cm
)
20
0
40
60
80
[23°C]
AE-3060 shows the highest flowability at the same condition
eXTerior
SAMSUNG SDI16
19Automotive Material Solutions
25
50
75
100
ppm Haze0
high Gloss and Low Gas PC/ABS
INFINOⓇ PC/ABS (HP Series) is characterized by its high gloss. The products come with low gas generation and well-balanced physical properties, targeting various lighting applications.
HP-1000XHP-1000XG
ChArACTeriSTiCS
BeneFiTS
• High gloss
• High heat resistance
• High impact resistance
• Low gas
APPLiCATionS
• Rear lamp housing
• Center high mounting stop lamp
• Rear lamp reflector
high Flowability
Low out Gassing
INFINOⓇ HP Series Reference
Spiral Test
Melt Flow
(250°C, 2.16kgf)37g/10min 34g/10min
INFINOⓇ HP Series ReferenceFogging test (250°C, 1Hr)
INFINOⓇ HP Series Reference
Gas Mark
LiGhTinG LiGhTinG
high heat resistant PBT
Materials for head lamp bezels require excellent surface qualities as well as low gas emissions. Good heat resistance and easy mold release are also important. Our ASF series employs tailor-made additives that can fulfill all these challenges. Furthermore, our materials offer the option of direct metallization that helps to cut production costs.
ASF Series ASF-9810F
ASF-9810FM
ASF-9810FL
ChArACTeriSTiCS
BeneFiTS
• High heat resistance
• High gloss surface
• Low gas
• Easy mold release
APPLiCATionS
• Head lamp bezel
• Fog lamp bezel
• Rear lamp reflector
easy mold release
Samsung SDI Chemical’s materials contain lubricants especially designed to improve mold release, even when there is no under cut on the back of the part.
The optimization of re-crystallization temperature can reduce the cooling time for injection molding by more than 20%, allowing for an important cost-reduction during the production process.
reduce Cooling Time
190°C
222°C222°C
165°C
Hea
t Flo
w (W
/g)
Temperature (°C)
1500
1.0
0.5
0.0
-0.5
-0.1
-1.5
-2.0
100 250 200 350 300 350
Hea
t Flo
w (W
/g)
Temperature (°C)
1500 100 250 200 350 300 350-1.5
-0.5
0.5
1.5
ASF Series Conventional PBT
ASF Series Conventional PBT
Special Surface roughness
ASF Series Reference 1 Reference 2 (Ra: 10.2nm) (Ra: 24.2nm) (Ra: 31.9nm)
The use of amorphous materials has improved the surface flatness significantly, resulting in an optimal surface quality for direct metallization.
SAMSUNG SDI18
21Automotive Material Solutions
STruCTureDimenSionAL STABiLiTy AR-5300H (GF30%)
PBT/ASA/GF
ConDuCTive / hiGh heAT reSiSTAnT CA-7000
CA-7009
PA/PPE/CnT
Low TemPerATure imPACT AE-3063I
PC/PBT
WR-7000P
PC/ASA
Diffusion PC
Our diffusion PC was designed for light guide plates in head and rear lamp applications. It exhibits high light transmittance while at the same time the light is scattered so that LED hot spots are prevented. The good flowability of our material enables its use for complex part geometries.
LT-1220
ChArACTeriSTiCS
BeneFiTS
• High flowability
• High heat resistance
• High impact resistance
• No LED hot spot
• Uniformed diffusion image
APPLiCATionS
• Light guide plate
• Inner lens
uniformed Lighting image (without LeD hot Spot)
uv resistance
INFINOⓇ LT-1220 Reference
PMMA Red Covering PMMA Clear Covering Hard Coating PC Covering
Combination
Δ E(SAE J 1960, 2500KJ)
1.3 1.5 0.4
(LED Hot Spot)
LiGhTinG
SAMSUNG SDI20
23Automotive Material Solutions
Filler Loading(%)
CNT CF CB
<1% >10% >15%
Better Surface Quality
Samsung SDI has adopted CNT(Carbon Nano Tube) composite for producing conductive fillers. Conductive PA/PPE/CNT grades can be used for the electrostatic painting process without conductive primers. This advantage also allows for fewer production processes and lower manufacturing costs. The surface quality of CNT composite is better than carbon fiber & carbon black composite materials because low loading of CNT.
Lower moisture Absorption
CA-7000 shows a lower moisture absorptivity than comparable materials in the market.
CA-7000 Reference
50 100 150 200 250
0.5
1
1.5
2
2.5
Time (days)
Wat
er A
bsor
ptio
n (%
)
0Time (days)
Wat
er A
bsor
ptio
n (%
)
100 20 30 40 50 60 70
1
2
3
4
Vol % of conductor
Com
duct
ivity
(ohm
-1 c
m-1)
10.1 10 100
1E-6
1E-8
1E-4
1E-2
1
45°C, 95%RH Submerged in water @RT
STruCTure STruCTure
Conductive and high heat resistant PA/PPe/CnT
Compared to steel, the use of plastic can achieve a 40% weight reduction. In addition, plastic is often easier to process, making more complex designs more feasible. PA/PPE/CNT composite is not only electrically conductive, but is also highly resistant against heat.
CA-7000 CA-7009
BeneFiTS
• High heat resistance
• Weight reduction
• Design freedom
• Conductivity
• Dimensional stability
APPLiCATionS
• Fender
• Fuel filler door
• Body panel
ChArACTeriSTiCS
Thermal Stability
DMTA Elastic modulus at 200°C
CA-7000 CA-7009 Reference
DMTA measurement condition
· Tem. Range: 0°C ~ 275°C· Scanning Rate: 5°C/min· Frequency: 1 Hz
Sto
rage
Mod
ulus
(MP
a)
Temperature (°C)
10
1
100
1,000
10,000
50 100 150 200 3002500
Material Elastic Modulus
CA-7000 370 MPa
CA-7009 315 MPa
Reference 130 Mpa
CNT Composite CF Composite CB Composite
Carbon Nanotube Carbon Fiber Carbon Black
Increase aspect ratio
SAMSUNG SDI22
25Automotive Material Solutions
Low Temperature impact PC/PBT
INFINOⓇ PC/PBT (AE-3063I) is designed for automotive bumper and energy absorber applications as it has low temperature impact strength, chemical resistance, and high flowability.
AE-3063I
BeneFiTS
• High toughness
• Good dimensional stability
• Chemical resistance
• Good flow properties
APPLiCATionS
• Bumper beam
• Energy absorber
INFINO® PC/PBT (AE-3063I) can help to make a big part injection molding and it has superior impact absorption energy.
ChArACTeriSTiCS
Flowability Chemical resistance
INFINO® PC/PBT (AE-3063I) has better impact strength at wide temperature range than other comparable materials in the market.
impact Strength Comparison
Temperature ℃
IZO
D (k
gf c
m/c
m)
-20-40 0 20 40
80
60
40
20
10
AE-3063I Reference
AE-3063I Reference
Flow length (mm)
Flow
Len
gth
(mm
)
250
200
150
100
50
0
MI=21
MI=14
AE-3063I Reference
Crack
Test Condition
· Thinner 2min. · Drying at 70°C 30min.
· Aging at RT 3hr. · Dupont drop (1m, 4kg)
Melt flow Index = 260°C, 5kg
STruCTure
Dimensional Stability PBT/ASA/GF
Car makers increasingly tend to develop new models equipped with panorama sunroofs in response to their popularity. But the complicated design and special functions of these roof modules are accompanied by a significant weight increase. Our AR series of PBT/ASA/GF with its high dimensional stability was especially designed for panorama sunroof frames. These plastic frames can provide a lightweight solution.
AR-5300H
BeneFiTS
• Dimensional stability
• Weight reduction
• Part integration
• High flowability, High stiffness
APPLiCATionS
• Panorama sunroof frame The plastic frame for panorama sunroofs can cut the
weight by as much as 40% compared with its steel counterpart.
ChArACTeriSTiCS
INFINO® AR-5300H of PBT/ASA/GF has better transverse mold shrinkage rate than other comparable materials in the market. It also has lower CLTE, which helps reduce deformation after injection molding and bolsters dimensional stability.
Shrinkage Comparison
Samsung (GF) Samsung (GF) Reference (GF) Reference (GF)
CLTe Comparison
0.4
0.2
0
0.6
0.8
1
STruCTure
MD Shrinkage TD Shrinkage
125
115
135
145
155
μ/m
°C
30
40
50
60
Mechanical Direction Transverse Direction
SAMSUNG SDI24
27Automotive Material Solutions
Properties Guide
Segment Products Key Application
PropertiesPhysical Properties Mechanical Properties Thermal Properties
Specific Gravity Melt Flow Index Mold Shirinkage Tensile Strength Flexural Strength Flexural Modulus Izod Impact (Notched) Charpy Impact Hardness VST
Test Method ASTM D-792 ISO 1183 ASTM D-1238 ISO 1133 ASTM D-955 ASTM D-638 ISO 527-1A ASTM D-790 ISO 178 ASTM D-790 ISO 178 ASTM D-256 ISO 180-1A ASTM D-785 ISO 2039-2 ISO R 306
Test Condition
Natual Color Natual Color
220°C/10kg250°C/10kg*250°C/5kg**
250°C/2.16kg***
220°C/10kg250°C/10kg*250°C/5kg**
250°C/2.16kg***
-50mm/min5mm/min*
50mm/min5mm/min*
2.8mm/min5mm/min*
2mm/min2.8mm/min*
2.8mm/min5mm/min*
2mm/min2.8mm/min*
1/4''1/8''*
- - -50N,
120°C/hr
Unit - - g/10min g/10min % kgf/cm2 MPa kgf/cm2 MPa kgf/cm2 MPa kgf/cm2 KJ/m2 R-Scale R-Scale °C
Interior
PC/ABS (High Impact) I/P Part, Center FasciaHP-1000X 1.13 1.13 31* 31* 0.5-0.7 600 57 840 (10mm/min) 82 22,500 (10mm/min) 2,200 61* 58 113 113 124HP-1000XA 1.13 1.13 27* 27* 0.5-0.6 550 50 750 80 20,500 2,100 45 45 113 112 123
PC/ABS (High Flow) Center ConsoleWP-1069 1.13 1.13 47* 47* 0.5-0.6 580 58 800 82 22,500 2,300 58* 48 116 116 122WP-1089 1.13 1.13 47* 47* 0.5-0.7 540 52 770 80 21,500 2,200 60* 51 126
PC/ABS (Low Gloss) Center Console WP-1098 1.13 1.13 30* 30* 0.5-0.7 500 50 720 70 20,500 1,950 62* 50 111 111 122PC/ABS (Paint-free) Interior Part LX-1098F 1.14 1.14 45* 45* 0.5-0.6 550 58 800 86 23,000 2,600 17 34 115 115 119
PC/ABS/GF Globe Box, Metal Back Molding
WP-1100 1.22 1.22 40* 40* 0.2-0.4 920* 94* 1,200 150 43,000 4,700 8 12 129WP-1200 1.27 1.27 36* 36* 0.15-0.35 1,200* 109* 1,500 180 62,000 7,400 8 11 130
Low Gloss ABS Interior PartSL-0100 1.03 1.03 7.5 7.5 0.4-0.7 330 35 450 57 16,000 1,800 7* 11 97 93 97LH-0300 1.04 1.04 10 10 0.4-0.7 350 36 470 58 17,600 2,000 15* 16 100 100 100MG-0330 1.04 1.04 3.5 3.5 0.4-0.6 440* 45* 630 75 22,000 2,400 14 14 111 111 113
High Heat ABS(General Purpose) Interior Part
SR-0300 1.05 1.05 13 13 450* 620 76 23,000 2,500 23 25 110 110 102SR-0310 1.05 1.05 12 12 410* 630 76 21,000 2,500 18 22 110 104SR-0310FM 1.06 1.06 20 20 400* 640 78 21,000 2,600 18 20 109 109 103SR-0320 K 1.06 1.06 9 9 420* 650 76 22,000 2,450 19 16 110 106SR-0320LTSR-0325LT 1.05 1.05 4 4 0.4-0.5 440* 50 620 85 21,000 2,500 12 15 113 113 113SR-0330M 1.06 1.06 2.9 2.9 0.6-0.64 420* 48 640 78 22,510 2,350 12 15 113 113 118SR-0340M 1.07 1.07 2.5 2.5 430* 47 640 78 22,000 2,500 14 13 110 110 120
PC/ASA (Low Gloss)Interior Part
WR-7250H 1.15 1.15 30* 30* 550 58 860 (10mm/min) 88 22,000 (10mm/min) 2,290 25 57 116 118 130PC/ASA (Antistatic) WR-7390AT 1.19 1.19 47* 47* 0.5-0.7 550 55 750 80 20,000 2,000 55 118 118 130
Exterior
ASA
Radiator Grille, Side Mirror Housing
WR-9300HF 1.07 1.07 12 12 0.4-0.7 450* 44 680 67 22,000 2,100 12* 10 106 106 99WR-9330I 1.07 1.07 5 5 0.4-0.7 480* 52 690 75 23,000 2,400 12* 10 107 108 104
A,B,C Pillar Trim WR-9120 J 1.07 1.07 26 26 0.4-0.7 450* 43 650 72 21,000 2,260 21* 11 105 105 98Side Mirror Housing WX-9300UV 1.07 1.07 10 10 0.4-0.7 440* 47 630 70 20,000 2,250 16* 12 104 104 98
Radiator Grille WX-9310UV 1.08 1.08 6 6 0.4-0.7 440* 49 680 70 22,000 2,400 18* 14 105 106 101WX-9330UV 1.07 1.07 4 4 0.4-0.7 450* 45 640 73 21,000 2,300 17* 13 103 103 103
Metal Plating ABS Radiator Grille MP-0160 R 1.04 1.04 1.5 (200°C, 5kg) 1.5 (200°C, 5kg) 0.3-0.6 480* 49 690 68 23,000 2,300 28 27 109 109 100MP-0670 1.04 1.04 2.3 (200°C, 5kg) 2.3 (200°C, 5kg) 0.3-0.6 450* 51 660 72 21,500 2,350 27 25 106 106 100
PC/ABS Metal PlatingWP-1041G 1.09 1.09 31* 31* 0.5-0.6 500 47 670 70 19,500 2,000 55* 47 105 107 113WP-1041 1.05 1.05 35* 35* 0.5-0.6 490 47 670 73 19,000 2,000 40 47 103 103 109
PBT/PET/GF Side Mirror, Base Plate AR-6508 1.75 1.75 9.5*** 9.5*** 0.17-0.55 1,450* 140* 2,200 210* 140,000 14,000* 9 11 202PC/ABS Wheel Cover WP-1059 1.12 1.12 45* 45* 0.5-0.7 540 54* 750 75 21,000 2,250 48* 45 112 112 113PC/PBT Door Handle, Door Panel AE-3060 1.2 1.2 8.5*** 8.5*** 0.4-0.6 600 60 800 80 21,000 2,100 70* 65 114 114 124
PC/PETRadiator Grille AE-2030 1.2 1.2 32* 32* 0.5-0.7 570 54 780 80 21,000 2,200 72* 61 113 115 130Rear Spoiler AE-2230 1.35 1.35 38* 38* 0.3-0.5 620* 62* 900 90 40,000 4,200 7* 7.5 110 110 135
PC/ASA Radiator Grill, Side Mirror Housing, Roof Rack
WR-7000 1.18 1.18 28* 28* 0.5-0.9 550 59 830 90 22,000 2,500 36 114 112 111
WX-7010 1.16 1.16 38* 38* 0.5-0.6 550 56 750 80 21,500 2,250 45 60 111 110 117
Structure
PA/PPE/CNT (High Heat) Fender & Fuel Filler DoorCA-7000 1.09 1.09 13 (280°C, 5kg) 13 (280°C, 5kg) 1.30-1.65 600 57 800 78 21,500 2,000 20* 113 113 190CA-7009 1.09 1.09 15 (280°C, 5kg) 15 (280°C, 5kg) 1.0-2.0 600 57 800 78 21,500 2,000 20 15 113 113
PC/ASA Roof Side Molding WR-7000P 1.14 1.14 34* 34* 0.5-0.6 590 57 820 87 23,000 2,200 46* 43 114 114 114PBT/ASA/GF Panorama Sunroof Frame AR-5300H 1.45 1.45 30** 30** 0.3 1,300* 110 1,900 170 90,000 7,800 9 8 117 117 205
PC/PBT Bumper Beam,Energy Absorber AE-3063I 1.2 1.2 43* 43* 0.5-0.7 530 50 750 (10mm/min) 67 20,000 (10mm/min) 1,800 70* 54 110 110 120
PC/PET Tailgate Outer Panel AE-2130 1.23 1.23 21 (260°C, 5kg) 21 (260°C, 5kg) 0.3-0.5 580 58 830 82 25,000 2,500 56* 40 111 111 132
Lighting
Metallization PBT Head Lamp BezelASF-9810F 1.31 1.31 55*** 55*** 1.8-2.0 600 58 850 80 25,000 2,320 4.2 3.7 116 116 180ASF-9810FM 1.31 1.31 60*** 60*** 1.8-2.0 550* 58 850* 80 26,500* 2,320 3.5 3.5 116 116 185ASF-9810FL 1.31 1.31 40*** 40*** 1.8-2.0 600 58 850 80 25,500 2,300 4 5 116 116 180
PC Head Lamp BezelLT-1220 1.2 1.2 22 (300°C, 1.2kg) 22 (300°C, 1.2kg) 0.5-0.7 640 64 920 91 23,000 2,300 75* 60 120 120 145LT-1100 1.2 1.2 11.5 (300°C, 1.2kg) 11.5 (300°C, 1.2kg) 0.5-0.7 640 64 920 91 23,000 2,300 87* 80 120 120 145
High Heat ABS(General Purpose) Rear Lamp Hosuing SR-0300 1.05 1.05 13 13 450* 620 76 23,000 2,500 23 25 110 110 102
PC/ABS (High Impact) Rear Lamp Hosuing
SR-0320 K 1.06 1.06 9 9 420* 650 76 22,000 2,450 19 16 110 106SR-0325LT 1.05 1.05 4 4 0.4-0.5 440* 50 620 85 21,000 2,500 12 15 113 113 113SR-0330M 1.06 1.06 2.9 2.9 0.6-0.64 420* 48 640 78 22,510 2,350 12 15 113 113 118HP-1000X 1.13 1.13 31* 31* 0.5-0.7 600 57 840 (10mm/min) 82 22,500 (10mm/min) 2,200 61* 58 113 113 124HP-1000XG 1.15 1.15 37* 37* 0.3-0.5 650 60 900 95 24,000 2,500 55* 50 120 120 130WP-1069 1.13 1.13 47* 47* 0.5-0.6 580 58 800 82 22,500 2,300 58* 48 116 116 122WP-1089 1.13 1.13 47* 47* 0.5-0.7 540 52 770 80 21,500 2,200 60* 51 126
High Heat ASA Rear Lamp HosuingWR-9330I 1.07 1.07 5 5 0.4-0.7 480* 52 690 75 23,000 2,400 12* 10 107 108 104WR-9370 1.07 1.07 3 3 0.4-0.7 500* 48 700 77 23,000 2,300 15 14 106 110 108
SAMSUNG SDI26
29Automotive Material Solutions
Global network
heADQuArTerS
GLoBAL SuBSiDiAry
SAMSUNG SDI Co., Ltd.56, Gosan-ro, Uiwang-si, Gyeonggi-do, 437-711, Korea Tel: +82-31-596-3408 Fax: +82-31-596-3490 E-mail: [email protected]
Los Angeles, USA Samsung Chemical Inc. Tel: +1-714-443-0931 E-mail: [email protected]
Frankfurt, Germany Samsung Chemical Europe GmbHTel: +49-6196-66-7470 E-mail: [email protected]
Shanghai, China Samsung Chemical Material Trading (Shanghai) Co., Ltd. Tel: +86-21-6270-3000 E-mail: [email protected]
Tokyo, Japan Samsung Chemical Inc.
Tel: +81-3-6369-6419
E-mail: [email protected]
Bangkok, Thailand Samsung Chemical Thailand Tel: +66-2-624-6726 E-mail: [email protected]
SALeS / ServiCe oFFiCe
AsiaShenzhen, ChinaTel: +86-755-8203-2323 E-mail: [email protected]
Tianjin, China Tel: +86-22-2836-4261 E-mail: [email protected]
Nagoya, Japan Tel: +81-52-569-1807 E-mail: [email protected]
Osaka, Japan Tel: +81-6-6949-3162 E-mail: [email protected]
Hanoi, Vietnam Tel: +84-241-369-9531 E-mail: [email protected]
Kuala Lumpur, Malaysia Tel: +60-3-2283-3714 E-mail: [email protected]
Jakarta, Indonesia Tel: +62-21-3005-3541 E-mail: [email protected]
Chennai, India Tel: +91-44-4299-4255 E-mail: [email protected]
Delhi, India Tel: +91-124-4153-804 E-mail: [email protected]
AmericaDetroit, U.S.A. Tel: +1-248-979-9211 E-mail: [email protected]
europeBratislava, Slovakia Tel: +421-692-086-008 E-mail: [email protected]
Milano, Italy Tel: +39-02-83111840 E-mail: [email protected]
Istanbul, Turkey Tel: +90-212-4378101-(115) E-mail: [email protected]
PLAnT
Yeosu, KoreaTel: +82-61-689-1221E-mai: [email protected]
Tianjin, ChinaTel: +86-22-5868-0291 E-mai: [email protected]
Dongguan, China Tel: +86-0769-8300-9852E-mai: [email protected]
Kornye, HungaryTel: +36-34-814-120 E-mail: [email protected]
Tijuana, MexicoTel: +52-664-627-4947 E-mail: [email protected]
heADQuArTerS (1)
GLoBAL SuBSiDiAry (5)
SALeS oFFiCe (16)
PLAnT (5)
MexicoTijuana
USALos AngelesDetroit
GermanyFrankfurt
TurkeyIstanbul
SOUTH KOREAUiwang
GumiBusanGwangju
SlovakiaBratislava
HungaryKornye
IndiaChennai
Delhi
ItalyMilano
ThailandBangkok
JapanTokyoNagoyaOsaka
MalaysiaKuala Lumpur
IndonesiaJakarta
ChinaSanghaiTianjinDongguan Shenzhen
VietnamHanoi
Yeosu
integrated Solutions
We provide integrated solutions to help you to be more innovative and more efficient. To enhance long-term success of our customers and partners we have developed sustainable and advanced products and solutions.
inTeGrATeDSoLuTionS
mATeriAL SoLuTion
DeSiGn SoLuTion
TeChniCAL SoLuTion
eCo wAySoLuTion
GLoBAL SuPPLy ChAin SoLuTion
SAMSUNG SDI28
We provide value to turn your imagination into reality with our innovative materials and optimal solutions.
Value+ your imagination
SAmSunG SDi – Chemical
Note The information contained herein is provided by SAMSUNG SDI Co., Ltd. and its subsidiaries and affiliates (collectively referred to as “SAMSUNG”) for information purposes only and should be used by individuals with technical experience and knowledge in the area. SAMSUNG SDI does not make any representation or warranties of the usefulness or expected result of the information, and does not assume any responsibility whatsoever related to the use of the information. SDI-C-A-032015
SAMSUNG SDI30
www.samsungchemical.com