Medium Voltage Distribution

Easergy RangeFault detection and remote control

A new path for achieving your electrical installations

A comprehensive offerEasergy range is part of a comprehensive offer of products that are perfectly coordinated to meet all medium and low voltage electrical distribution requirements. All of these products have been designed to work together: electrical, mechanical and communication compatibility.

The electrical installation is thus optimised and has improved performance: better service continuity, increased personnel and equipment safety, guaranteed upgradeability, efficient monitoring and control.

You therefore have all the advantages at hand in terms of know-how and creativity for achieving optimised, safe, upgradeable and compliant installations.

Tools for facilitating the design and installationWith Schneider Electric, you have a complete range of tools to help you get to know and install the products whilst complying with current standards and good working practices. These tools, technical sheets and guides, design software, training courses, etc are regularly updated.

Schneider Electric is associating itself with your know-how and your creativity to produce optimised, safe, upgradeable and compliant installations.

For a real partnership with youA universal solution doesnt exist because each electrical installation is specific. The variety of combinations on offer allows you to truly customise the technical solutions.

You are able to express your creativity and put your know-how to best advantage when designing, manufacturing and exploiting an electrical installation.

Optimising Medium Voltageelectrical network operation

Reducing down timeand improving productivity

Reliable MV network fault detection and indication, for complete peace of mind Optimized actions through detailed local or remote information Remote network reconfiguration through control units (GSM, Internet, standard protocols, etc)

Keeping in control of invesments Solutions catalogue to meet every need in terms of budget and networkoperation Simplified and controlled integration and operation Modular and scaleable offer adapting to your current and future needs, for total flexibility.

Medium voltage overhead networks

Easergy Flite - A range of fault detectors for MVoverrhead networks.

Detectors for local fault current indication, perma-nent and transient, phase to phase and phase to earth. Flite 110-SA and 112-SA: single-phase, line-mounted ammetric faultpassage detectors Flite 210 and 230: single-phase, pole-mounted ammetric fault passagedetectors Flite 3XX: three-phase, pole-mounted directional detectors

Communitating fault detector for remote indication Flite 116-SA: single-phase, line-mounted ammetric fault passagedetectors communicating via short range radio with the G200 concentrator. G200: Concentrator to provide local processing of data sent byFlite 116-SA units and communication with the control center.

Easergy T200 - Control unit for MV substations and overhead switches with a high level ofintegrated functions.A flexible architecture with a high level of integratedfunctions: Management of switchgears Uninterruptible power supply Fault passage indicator Measurements MV network reconfiguration automation Large catolog of protocols: IEC 870-5-101 and 104, DNP3,Modbus, and various proprietary protocols Various transmission systems: Ethernet, RS232, Radio, PSTN, GSM,

One solution for all networks Easergy T200I: controls 1-16 switches for underground networks Easergy T200E: controls 4 switches for underground networks Easergy T200P: controls 1-4 switches or overhead networks T200P Overhead network control

Flite 110/112 SA Flite 210/230

Flite116/G200 Flite 3xx

Easergy Flair A range of fault detectors for MV underground networks Three-phase fault current detectors for local indi-cation of phase to phase and phase to earth fault currents. Flair 2XD: self-powered, overcurrent detectors integrated in the MV switchgear Flair 279 and 219: wall-mounted ammetric fault passage detectors Flair 3XX: directional detectors

Communitating fault detector for remote indication Flair 200C: 2-channel, 3-phase current fault detector compatible with all type of neutral arrangement. In addition to conventional detection functions, Flair 200C integrates substation metering, monitoring and communication with the control center.

Easergy L500 - Network control systemdedicated to the Easergy rangeA simplified operation Mini Scada with network view, detail view, alarm log and archive for Easergy equipment control Simplified implementation through preconfigured libraries

T200I Underground network control

Flite 3xxFlair 200C

Flair 279-219 Flair 2xD

Web-enabled Power & Control

Medium voltage underground networks

AR

T. 2

8792

S

chne

ider

Ele

ctric

Indu

strie

s S

AS

- To

us d

roits

rse

rvs

Schneider Electric35 Rue Joseph MonierCS 3032392506 Rueil Malmaison CedexTel : +33 (0)1 41 29 70 00Fax : +33 (0)1 41 29 71 00

www.schneider-electric.com

ENMED199054EN

As standards, specifications and designs change from time to time, please ask for

confirmation of the information given in this publication.

Thisdocumenthasbeenprintedonecologicalpaper

Publishing: Schneider Electric IndustriesSASDesign: Schneider Electric Industries SASPrinting: Imprimerie des Deux Ponts - made in France 01-2010